/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2008 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * Set to prevent mc-amd from attaching. */ int mc_no_attach = 0; /* * Of the 754/939/940 packages, only socket 940 supports quadrank registered * dimms. Unfortunately, no memory-controller register indicates the * presence of quadrank dimm support or presence (i.e., in terms of number * of slots per cpu, and chip-select lines per slot, The following may be set * in /etc/system to indicate the presence of quadrank support on a motherboard. * * There is no need to set this for F(1207) and S1g1. */ int mc_quadranksupport = 0; mc_t *mc_list, *mc_last; krwlock_t mc_lock; int mc_hold_attached = 1; #define MAX(m, n) ((m) >= (n) ? (m) : (n)) #define MIN(m, n) ((m) <= (n) ? (m) : (n)) /* * The following tuneable is used to determine the DRAM scrubbing rate. * The values range from 0x00-0x16 as described in the BKDG. Zero * disables DRAM scrubbing. Values above zero indicate rates in descending * order. * * The default value below is used on several Sun systems. In the future * this code should assign values dynamically based on memory sizing. */ uint32_t mc_scrub_rate_dram = 0xd; /* 64B every 163.8 us; 1GB per 45 min */ enum { MC_SCRUB_BIOSDEFAULT, /* retain system default value */ MC_SCRUB_FIXED, /* assign mc_scrub_rate_* values */ MC_SCRUB_MAX /* assign max of system and tunables */ } mc_scrub_policy = MC_SCRUB_MAX; static void mc_snapshot_destroy(mc_t *mc) { ASSERT(RW_LOCK_HELD(&mc_lock)); if (mc->mc_snapshot == NULL) return; kmem_free(mc->mc_snapshot, mc->mc_snapshotsz); mc->mc_snapshot = NULL; mc->mc_snapshotsz = 0; mc->mc_snapshotgen++; } static int mc_snapshot_update(mc_t *mc) { ASSERT(RW_LOCK_HELD(&mc_lock)); if (mc->mc_snapshot != NULL) return (0); if (nvlist_pack(mc->mc_nvl, &mc->mc_snapshot, &mc->mc_snapshotsz, NV_ENCODE_XDR, KM_SLEEP) != 0) return (-1); return (0); } static mc_t * mc_lookup_by_chipid(int chipid) { mc_t *mc; ASSERT(RW_LOCK_HELD(&mc_lock)); for (mc = mc_list; mc != NULL; mc = mc->mc_next) { if (mc->mc_props.mcp_num == chipid) return (mc); } return (NULL); } /* * Read config register pairs into the two arrays provided on the given * handle and at offsets as follows: * * Index Array r1 offset Array r2 offset * 0 r1addr r2addr * 1 r1addr + incr r2addr + incr * 2 r1addr + 2 * incr r2addr + 2 * incr * ... * n - 1 r1addr + (n - 1) * incr r2addr + (n - 1) * incr * * The number of registers to read into the r1 array is r1n; the number * for the r2 array is r2n. */ static void mc_prop_read_pair(mc_pcicfg_hdl_t cfghdl, uint32_t *r1, off_t r1addr, int r1n, uint32_t *r2, off_t r2addr, int r2n, off_t incr) { int i; for (i = 0; i < MAX(r1n, r2n); i++, r1addr += incr, r2addr += incr) { if (i < r1n) r1[i] = mc_pcicfg_get32(cfghdl, r1addr); if (i < r2n) r2[i] = mc_pcicfg_get32(cfghdl, r2addr); } } #define NSKT 6 static void mc_nvl_add_socket(nvlist_t *nvl, mc_t *mc) { const char *s = "Unknown"; int i; static const struct { uint32_t type; const char *name; } sktnames[NSKT] = { { X86_SOCKET_754, "Socket 754" }, { X86_SOCKET_939, "Socket 939" }, { X86_SOCKET_940, "Socket 940" }, { X86_SOCKET_AM2, "Socket AM2" }, { X86_SOCKET_F1207, "Socket F(1207)" }, { X86_SOCKET_S1g1, "Socket S1g1" }, }; for (i = 0; i < NSKT; i++) { if (mc->mc_socket == sktnames[i].type) { s = sktnames[i].name; break; } } (void) nvlist_add_string(nvl, "socket", s); } static uint32_t mc_ecc_enabled(mc_t *mc) { uint32_t rev = mc->mc_props.mcp_rev; union mcreg_nbcfg nbcfg; MCREG_VAL32(&nbcfg) = mc->mc_cfgregs.mcr_nbcfg; return (MC_REV_MATCH(rev, MC_F_REVS_BCDE) ? MCREG_FIELD_F_preF(&nbcfg, EccEn) : MCREG_FIELD_F_revFG(&nbcfg, EccEn)); } static uint32_t mc_ck_enabled(mc_t *mc) { uint32_t rev = mc->mc_props.mcp_rev; union mcreg_nbcfg nbcfg; MCREG_VAL32(&nbcfg) = mc->mc_cfgregs.mcr_nbcfg; return (MC_REV_MATCH(rev, MC_F_REVS_BCDE) ? MCREG_FIELD_F_preF(&nbcfg, ChipKillEccEn) : MCREG_FIELD_F_revFG(&nbcfg, ChipKillEccEn)); } static void mc_nvl_add_ecctype(nvlist_t *nvl, mc_t *mc) { (void) nvlist_add_string(nvl, "ecc-type", mc_ecc_enabled(mc) ? (mc_ck_enabled(mc) ? "ChipKill 128/16" : "Normal 64/8") : "None"); } static void mc_nvl_add_prop(nvlist_t *nvl, void *node, mcamd_propcode_t code, int reqval) { int valfound; uint64_t value; const char *name = mcamd_get_propname(code); valfound = mcamd_get_numprop(NULL, (mcamd_node_t *)node, code, &value); ASSERT(name != NULL && valfound); if (name != NULL && valfound && (!reqval || value != MC_INVALNUM)) (void) nvlist_add_uint64(nvl, name, value); } static void mc_nvl_add_cslist(nvlist_t *mcnvl, mc_t *mc) { mc_cs_t *mccs = mc->mc_cslist; nvlist_t *cslist[MC_CHIP_NCS]; int nelem, i; for (nelem = 0; mccs != NULL; mccs = mccs->mccs_next, nelem++) { nvlist_t **csp = &cslist[nelem]; char csname[MCDCFG_CSNAMELEN]; (void) nvlist_alloc(csp, NV_UNIQUE_NAME, KM_SLEEP); mc_nvl_add_prop(*csp, mccs, MCAMD_PROP_NUM, 0); mc_nvl_add_prop(*csp, mccs, MCAMD_PROP_BASE_ADDR, 0); mc_nvl_add_prop(*csp, mccs, MCAMD_PROP_MASK, 0); mc_nvl_add_prop(*csp, mccs, MCAMD_PROP_SIZE, 0); /* * It is possible for an mc_cs_t not to have associated * DIMM info if mcdcfg_lookup failed. */ if (mccs->mccs_csl[0] != NULL) { mc_nvl_add_prop(*csp, mccs, MCAMD_PROP_CSDIMM1, 1); mcdcfg_csname(mc->mc_socket, mccs->mccs_csl[0], csname, sizeof (csname)); (void) nvlist_add_string(*csp, "dimm1-csname", csname); } if (mccs->mccs_csl[1] != NULL) { mc_nvl_add_prop(*csp, mccs, MCAMD_PROP_CSDIMM2, 1); mcdcfg_csname(mc->mc_socket, mccs->mccs_csl[1], csname, sizeof (csname)); (void) nvlist_add_string(*csp, "dimm2-csname", csname); } } /* Add cslist nvlist array even if zero members */ (void) nvlist_add_nvlist_array(mcnvl, "cslist", cslist, nelem); for (i = 0; i < nelem; i++) nvlist_free(cslist[i]); } static void mc_nvl_add_dimmlist(nvlist_t *mcnvl, mc_t *mc) { nvlist_t *dimmlist[MC_CHIP_NDIMM]; mc_dimm_t *mcd; int nelem, i; for (nelem = 0, mcd = mc->mc_dimmlist; mcd != NULL; mcd = mcd->mcd_next, nelem++) { nvlist_t **dimmp = &dimmlist[nelem]; uint64_t csnums[MC_CHIP_DIMMRANKMAX]; char csname[4][MCDCFG_CSNAMELEN]; char *csnamep[4]; int ncs = 0; (void) nvlist_alloc(dimmp, NV_UNIQUE_NAME, KM_SLEEP); mc_nvl_add_prop(*dimmp, mcd, MCAMD_PROP_NUM, 1); mc_nvl_add_prop(*dimmp, mcd, MCAMD_PROP_SIZE, 1); for (i = 0; i < MC_CHIP_DIMMRANKMAX; i++) { if (mcd->mcd_cs[i] != NULL) { csnums[ncs] = mcd->mcd_cs[i]->mccs_props.csp_num; mcdcfg_csname(mc->mc_socket, mcd->mcd_csl[i], csname[ncs], MCDCFG_CSNAMELEN); csnamep[ncs] = csname[ncs]; ncs++; } } (void) nvlist_add_uint64_array(*dimmp, "csnums", csnums, ncs); (void) nvlist_add_string_array(*dimmp, "csnames", csnamep, ncs); } /* Add dimmlist nvlist array even if zero members */ (void) nvlist_add_nvlist_array(mcnvl, "dimmlist", dimmlist, nelem); for (i = 0; i < nelem; i++) nvlist_free(dimmlist[i]); } static void mc_nvl_add_htconfig(nvlist_t *mcnvl, mc_t *mc) { mc_cfgregs_t *mcr = &mc->mc_cfgregs; union mcreg_htroute *htrp = (union mcreg_htroute *)&mcr->mcr_htroute[0]; union mcreg_nodeid *nip = (union mcreg_nodeid *)&mcr->mcr_htnodeid; union mcreg_unitid *uip = (union mcreg_unitid *)&mcr->mcr_htunitid; int ndcnt = HT_COHERENTNODES(nip); uint32_t BCRte[MC_CHIP_MAXNODES]; uint32_t RPRte[MC_CHIP_MAXNODES]; uint32_t RQRte[MC_CHIP_MAXNODES]; nvlist_t *nvl; int i; (void) nvlist_alloc(&nvl, NV_UNIQUE_NAME, KM_SLEEP); (void) nvlist_add_uint32(nvl, "NodeId", MCREG_FIELD_CMN(nip, NodeId)); (void) nvlist_add_uint32(nvl, "CoherentNodes", HT_COHERENTNODES(nip)); (void) nvlist_add_uint32(nvl, "SbNode", MCREG_FIELD_CMN(nip, SbNode)); (void) nvlist_add_uint32(nvl, "LkNode", MCREG_FIELD_CMN(nip, LkNode)); (void) nvlist_add_uint32(nvl, "SystemCoreCount", HT_SYSTEMCORECOUNT(nip)); (void) nvlist_add_uint32(nvl, "C0Unit", MCREG_FIELD_CMN(uip, C0Unit)); (void) nvlist_add_uint32(nvl, "C1Unit", MCREG_FIELD_CMN(uip, C1Unit)); (void) nvlist_add_uint32(nvl, "McUnit", MCREG_FIELD_CMN(uip, McUnit)); (void) nvlist_add_uint32(nvl, "HbUnit", MCREG_FIELD_CMN(uip, HbUnit)); (void) nvlist_add_uint32(nvl, "SbLink", MCREG_FIELD_CMN(uip, SbLink)); if (ndcnt <= MC_CHIP_MAXNODES) { for (i = 0; i < ndcnt; i++, htrp++) { BCRte[i] = MCREG_FIELD_CMN(htrp, BCRte); RPRte[i] = MCREG_FIELD_CMN(htrp, RPRte); RQRte[i] = MCREG_FIELD_CMN(htrp, RQRte); } (void) nvlist_add_uint32_array(nvl, "BroadcastRoutes", &BCRte[0], ndcnt); (void) nvlist_add_uint32_array(nvl, "ResponseRoutes", &RPRte[0], ndcnt); (void) nvlist_add_uint32_array(nvl, "RequestRoutes", &RQRte[0], ndcnt); } (void) nvlist_add_nvlist(mcnvl, "htconfig", nvl); nvlist_free(nvl); } static nvlist_t * mc_nvl_create(mc_t *mc) { nvlist_t *mcnvl; (void) nvlist_alloc(&mcnvl, NV_UNIQUE_NAME, KM_SLEEP); /* * Since this nvlist is used in populating the topo tree changes * made here may propogate through to changed property names etc * in the topo tree. Some properties in the topo tree will be * contracted via ARC, so be careful what you change here. */ (void) nvlist_add_uint8(mcnvl, MC_NVLIST_VERSTR, MC_NVLIST_VERS1); mc_nvl_add_prop(mcnvl, mc, MCAMD_PROP_NUM, 0); mc_nvl_add_prop(mcnvl, mc, MCAMD_PROP_REV, 0); (void) nvlist_add_string(mcnvl, "revname", mc->mc_revname); mc_nvl_add_socket(mcnvl, mc); mc_nvl_add_ecctype(mcnvl, mc); mc_nvl_add_prop(mcnvl, mc, MCAMD_PROP_BASE_ADDR, 0); mc_nvl_add_prop(mcnvl, mc, MCAMD_PROP_LIM_ADDR, 0); mc_nvl_add_prop(mcnvl, mc, MCAMD_PROP_ILEN, 0); mc_nvl_add_prop(mcnvl, mc, MCAMD_PROP_ILSEL, 0); mc_nvl_add_prop(mcnvl, mc, MCAMD_PROP_CSINTLVFCTR, 0); mc_nvl_add_prop(mcnvl, mc, MCAMD_PROP_DRAMHOLE_SIZE, 0); mc_nvl_add_prop(mcnvl, mc, MCAMD_PROP_ACCESS_WIDTH, 0); mc_nvl_add_prop(mcnvl, mc, MCAMD_PROP_CSBANKMAPREG, 0); mc_nvl_add_prop(mcnvl, mc, MCAMD_PROP_BANKSWZL, 0); mc_nvl_add_prop(mcnvl, mc, MCAMD_PROP_MOD64MUX, 0); mc_nvl_add_prop(mcnvl, mc, MCAMD_PROP_SPARECS, 1); mc_nvl_add_prop(mcnvl, mc, MCAMD_PROP_BADCS, 1); mc_nvl_add_cslist(mcnvl, mc); mc_nvl_add_dimmlist(mcnvl, mc); mc_nvl_add_htconfig(mcnvl, mc); return (mcnvl); } /* * Link a dimm to its associated chip-selects and chip-select lines. * Total the size of all ranks of this dimm. */ static void mc_dimm_csadd(mc_t *mc, mc_dimm_t *mcd, mc_cs_t *mccs, const mcdcfg_csl_t *csl) { int factor = (mc->mc_props.mcp_accwidth == 128) ? 2 : 1; uint64_t sz = 0; int i; /* Skip to first unused rank slot */ for (i = 0; i < MC_CHIP_DIMMRANKMAX; i++) { if (mcd->mcd_cs[i] == NULL) { mcd->mcd_cs[i] = mccs; mcd->mcd_csl[i] = csl; sz += mccs->mccs_props.csp_size / factor; break; } else { sz += mcd->mcd_cs[i]->mccs_props.csp_size / factor; } } ASSERT(i != MC_CHIP_DIMMRANKMAX); mcd->mcd_size = sz; } /* * Create a dimm structure and call to link it to its associated chip-selects. */ static mc_dimm_t * mc_dimm_create(mc_t *mc, uint_t num) { mc_dimm_t *mcd = kmem_zalloc(sizeof (mc_dimm_t), KM_SLEEP); mcd->mcd_hdr.mch_type = MC_NT_DIMM; mcd->mcd_mc = mc; mcd->mcd_num = num; return (mcd); } /* * The chip-select structure includes an array of dimms associated with * that chip-select. This function fills that array, and also builds * the list of all dimms on this memory controller mc_dimmlist. The * caller has filled a structure with all there is to know about the * associated dimm(s). */ static void mc_csdimms_create(mc_t *mc, mc_cs_t *mccs, mcdcfg_rslt_t *rsltp) { mc_dimm_t *found[MC_CHIP_DIMMPERCS]; mc_dimm_t *mcd; int nfound = 0; int i; /* * Has some other chip-select already created this dimm or dimms? * If so then link to the dimm(s) from the mccs_dimm array, * record their topo numbers in the csp_dimmnums array, and link * the dimm(s) to the additional chip-select. */ for (mcd = mc->mc_dimmlist; mcd != NULL; mcd = mcd->mcd_next) { for (i = 0; i < rsltp->ndimm; i++) { if (mcd->mcd_num == rsltp->dimm[i].toponum) found[nfound++] = mcd; } } ASSERT(nfound == 0 || nfound == rsltp->ndimm); for (i = 0; i < rsltp->ndimm; i++) { if (nfound == 0) { mcd = mc_dimm_create(mc, rsltp->dimm[i].toponum); if (mc->mc_dimmlist == NULL) mc->mc_dimmlist = mcd; else mc->mc_dimmlast->mcd_next = mcd; mc->mc_dimmlast = mcd; } else { mcd = found[i]; } mccs->mccs_dimm[i] = mcd; mccs->mccs_csl[i] = rsltp->dimm[i].cslp; mccs->mccs_props.csp_dimmnums[i] = mcd->mcd_num; mc_dimm_csadd(mc, mcd, mccs, rsltp->dimm[i].cslp); } /* The rank number is constant across all constituent dimm(s) */ mccs->mccs_props.csp_dimmrank = rsltp->dimm[0].cslp->csl_rank; } /* * mc_dimmlist_create is called after we have discovered all enabled * (and spare or testfailed on revs F and G) chip-selects on the * given memory controller. For each chip-select we must derive * the associated dimms, remembering that a chip-select csbase/csmask * pair may be associated with up to 2 chip-select lines (in 128 bit mode) * and that any one dimm may be associated with 1, 2, or 4 chip-selects * depending on whether it is single, dual or quadrank. */ static void mc_dimmlist_create(mc_t *mc) { union mcreg_dramcfg_hi *drcfghip = (union mcreg_dramcfg_hi *)(&mc->mc_cfgregs.mcr_dramcfghi); mc_props_t *mcp = &mc->mc_props; uint32_t rev = mcp->mcp_rev; mc_cs_t *mccs; int r4 = 0, s4 = 0; /* * Are we dealing with quadrank registered dimms? * * For socket 940 we can't tell and we'll assume we're not. * This can be over-ridden by the admin in /etc/system by setting * mc_quadranksupport nonzero. A possible optimisation in systems * that export an SMBIOS table would be to count the number of * dimm slots per cpu - more than 4 would indicate no quadrank support * and 4 or fewer would indicate that if we see any of the upper * chip-selects enabled then a quadrank dimm is present. * * For socket F(1207) we can check a bit in the dram config high reg. * * Other socket types do not support registered dimms. */ if (mc->mc_socket == X86_SOCKET_940) r4 = mc_quadranksupport != 0; else if (mc->mc_socket == X86_SOCKET_F1207) r4 = MCREG_FIELD_F_revFG(drcfghip, FourRankRDimm); /* * Are we dealing with quadrank SO-DIMMs? These are supported * in AM2 and S1g1 packages only, but in all rev F/G cases we * can detect their presence via a bit in the dram config high reg. */ if (MC_REV_MATCH(rev, MC_F_REVS_FG)) s4 = MCREG_FIELD_F_revFG(drcfghip, FourRankSODimm); for (mccs = mc->mc_cslist; mccs != NULL; mccs = mccs->mccs_next) { mcdcfg_rslt_t rslt; /* * If lookup fails we will not create dimm structures for * this chip-select. In the mc_cs_t we will have both * csp_dimmnum members set to MC_INVALNUM and patounum * code will see from those that we do not have dimm info * for this chip-select. */ if (mcdcfg_lookup(rev, mcp->mcp_mod64mux, mcp->mcp_accwidth, mccs->mccs_props.csp_num, mc->mc_socket, r4, s4, &rslt) < 0) continue; mc_csdimms_create(mc, mccs, &rslt); } } static mc_cs_t * mc_cs_create(mc_t *mc, uint_t num, uint64_t base, uint64_t mask, size_t sz, int csbe, int spare, int testfail) { mc_cs_t *mccs = kmem_zalloc(sizeof (mc_cs_t), KM_SLEEP); mccs_props_t *csp = &mccs->mccs_props; int i; mccs->mccs_hdr.mch_type = MC_NT_CS; mccs->mccs_mc = mc; csp->csp_num = num; csp->csp_base = base; csp->csp_mask = mask; csp->csp_size = sz; csp->csp_csbe = csbe; csp->csp_spare = spare; csp->csp_testfail = testfail; for (i = 0; i < MC_CHIP_DIMMPERCS; i++) csp->csp_dimmnums[i] = MC_INVALNUM; if (spare) mc->mc_props.mcp_sparecs = num; return (mccs); } /* * For any cs# of this mc marked TestFail generate an ereport with * resource identifying the associated dimm(s). */ static void mc_report_testfails(mc_t *mc) { mc_unum_t unum; mc_cs_t *mccs; int i; for (mccs = mc->mc_cslist; mccs != NULL; mccs = mccs->mccs_next) { if (mccs->mccs_props.csp_testfail) { unum.unum_board = 0; unum.unum_chip = mc->mc_props.mcp_num; unum.unum_mc = 0; unum.unum_chan = MC_INVALNUM; unum.unum_cs = mccs->mccs_props.csp_num; unum.unum_rank = mccs->mccs_props.csp_dimmrank; unum.unum_offset = MCAMD_RC_INVALID_OFFSET; for (i = 0; i < MC_CHIP_DIMMPERCS; i++) unum.unum_dimms[i] = MC_INVALNUM; mcamd_ereport_post(mc, FM_EREPORT_CPU_AMD_MC_TESTFAIL, &unum, FM_EREPORT_PAYLOAD_FLAGS_CPU_AMD_MC_TESTFAIL); } } } /* * Function 0 - HyperTransport Technology Configuration */ static void mc_mkprops_htcfg(mc_pcicfg_hdl_t cfghdl, mc_t *mc) { union mcreg_nodeid nodeid; off_t offset; int i; mc->mc_cfgregs.mcr_htnodeid = MCREG_VAL32(&nodeid) = mc_pcicfg_get32(cfghdl, MC_HT_REG_NODEID); mc->mc_cfgregs.mcr_htunitid = mc_pcicfg_get32(cfghdl, MC_HT_REG_UNITID); for (i = 0, offset = MC_HT_REG_RTBL_NODE_0; i < HT_COHERENTNODES(&nodeid); i++, offset += MC_HT_REG_RTBL_INCR) mc->mc_cfgregs.mcr_htroute[i] = mc_pcicfg_get32(cfghdl, offset); } /* * Function 1 Configuration - Address Map (see BKDG 3.4.4 DRAM Address Map) * * Read the Function 1 Address Map for each potential DRAM node. The Base * Address for a node gives the starting system address mapped at that node, * and the limit gives the last valid address mapped at that node. Regions for * different nodes should not overlap, unless node-interleaving is enabled. * The base register also indicates the node-interleaving settings (IntlvEn). * The limit register includes IntlvSel which determines which 4K blocks will * be routed to this node and the destination node ID for addresses that fall * within the [base, limit] range - this must match the pair number. */ static void mc_mkprops_addrmap(mc_pcicfg_hdl_t cfghdl, mc_t *mc) { union mcreg_drambase basereg; union mcreg_dramlimit limreg; mc_props_t *mcp = &mc->mc_props; mc_cfgregs_t *mcr = &mc->mc_cfgregs; union mcreg_dramhole hole; int nodeid = mc->mc_props.mcp_num; mcr->mcr_drambase = MCREG_VAL32(&basereg) = mc_pcicfg_get32(cfghdl, MC_AM_REG_DRAMBASE_0 + nodeid * MC_AM_REG_DRAM_INCR); mcr->mcr_dramlimit = MCREG_VAL32(&limreg) = mc_pcicfg_get32(cfghdl, MC_AM_REG_DRAMLIM_0 + nodeid * MC_AM_REG_DRAM_INCR); /* * Derive some "cooked" properties for nodes that have a range of * physical addresses that are read or write enabled and for which * the DstNode matches the node we are attaching. */ if (MCREG_FIELD_CMN(&limreg, DRAMLimiti) != 0 && MCREG_FIELD_CMN(&limreg, DstNode) == nodeid && (MCREG_FIELD_CMN(&basereg, WE) || MCREG_FIELD_CMN(&basereg, RE))) { mcp->mcp_base = MC_DRAMBASE(&basereg); mcp->mcp_lim = MC_DRAMLIM(&limreg); mcp->mcp_ilen = MCREG_FIELD_CMN(&basereg, IntlvEn); mcp->mcp_ilsel = MCREG_FIELD_CMN(&limreg, IntlvSel); } /* * The Function 1 DRAM Hole Address Register tells us which node(s) * own the DRAM space that is hoisted above 4GB, together with the * hole base and offset for this node. This was introduced in * revision E. */ if (MC_REV_ATLEAST(mc->mc_props.mcp_rev, MC_F_REV_E)) { mcr->mcr_dramhole = MCREG_VAL32(&hole) = mc_pcicfg_get32(cfghdl, MC_AM_REG_HOLEADDR); if (MCREG_FIELD_CMN(&hole, DramHoleValid)) mcp->mcp_dramhole_size = MC_DRAMHOLE_SIZE(&hole); } } /* * Read some function 3 parameters via PCI Mechanism 1 accesses (which * will serialize any NB accesses). */ static void mc_getmiscctl(mc_t *mc) { uint32_t rev = mc->mc_props.mcp_rev; union mcreg_nbcfg nbcfg; union mcreg_sparectl sparectl; mc->mc_cfgregs.mcr_nbcfg = MCREG_VAL32(&nbcfg) = mc_pcicfg_get32_nohdl(mc, MC_FUNC_MISCCTL, MC_CTL_REG_NBCFG); if (MC_REV_MATCH(rev, MC_F_REVS_FG)) { mc->mc_cfgregs.mcr_sparectl = MCREG_VAL32(&sparectl) = mc_pcicfg_get32_nohdl(mc, MC_FUNC_MISCCTL, MC_CTL_REG_SPARECTL); if (MCREG_FIELD_F_revFG(&sparectl, SwapDone)) { mc->mc_props.mcp_badcs = MCREG_FIELD_F_revFG(&sparectl, BadDramCs); } } } static int csbasecmp(mc_cs_t **csapp, mc_cs_t **csbpp) { uint64_t basea = (*csapp)->mccs_props.csp_base; uint64_t baseb = (*csbpp)->mccs_props.csp_base; if (basea == baseb) return (0); else if (basea < baseb) return (-1); else return (1); } /* * The following are for use in simulating TestFail for a chip-select * without poking at the hardware (which tends to get upset if you do * since the BIOS needs to restart to map a failed cs out). For internal * testing only! Note that setting these does not give the full experience - * the select chip-select *is* enabled and can give errors etc and the * patounum logic will get confused. */ int testfail_mcnum = -1; int testfail_csnum = -1; /* * Function 2 configuration - DRAM Controller */ static void mc_mkprops_dramctl(mc_pcicfg_hdl_t cfghdl, mc_t *mc) { union mcreg_csbase base[MC_CHIP_NCS]; union mcreg_csmask mask[MC_CHIP_NCS]; union mcreg_dramcfg_lo drcfg_lo; union mcreg_dramcfg_hi drcfg_hi; union mcreg_drammisc drmisc; union mcreg_bankaddrmap baddrmap; mc_props_t *mcp = &mc->mc_props; mc_cfgregs_t *mcr = &mc->mc_cfgregs; int maskdivisor; int wide = 0; uint32_t rev = mc->mc_props.mcp_rev; int i; mcamd_hdl_t hdl; mcamd_mkhdl(&hdl); /* to call into common code */ /* * Read Function 2 DRAM Configuration High and Low registers. The High * part is mostly concerned with memory clocks etc and we'll not have * any use for that. The Low component tells us if ECC is enabled, * if we're in 64- or 128-bit MC mode, how the upper chip-selects * are mapped, which chip-select pairs are using x4 parts, etc. */ MCREG_VAL32(&drcfg_lo) = mc_pcicfg_get32(cfghdl, MC_DC_REG_DRAMCFGLO); MCREG_VAL32(&drcfg_hi) = mc_pcicfg_get32(cfghdl, MC_DC_REG_DRAMCFGHI); mcr->mcr_dramcfglo = MCREG_VAL32(&drcfg_lo); mcr->mcr_dramcfghi = MCREG_VAL32(&drcfg_hi); /* * Note the DRAM controller width. The 64/128 bit is in a different * bit position for revision F and G. */ if (MC_REV_MATCH(rev, MC_F_REVS_FG)) { wide = MCREG_FIELD_F_revFG(&drcfg_lo, Width128); } else { wide = MCREG_FIELD_F_preF(&drcfg_lo, Width128); } mcp->mcp_accwidth = wide ? 128 : 64; /* * Read Function 2 DRAM Controller Miscellaenous Regsiter for those * revs that support it. This include the Mod64Mux indication on * these revs - for rev E it is in DRAM config low. */ if (MC_REV_MATCH(rev, MC_F_REVS_FG)) { mcr->mcr_drammisc = MCREG_VAL32(&drmisc) = mc_pcicfg_get32(cfghdl, MC_DC_REG_DRAMMISC); mcp->mcp_mod64mux = MCREG_FIELD_F_revFG(&drmisc, Mod64Mux); } else if (MC_REV_MATCH(rev, MC_F_REV_E)) { mcp->mcp_mod64mux = MCREG_FIELD_F_preF(&drcfg_lo, Mod64BitMux); } /* * Read Function 2 DRAM Bank Address Mapping. This encodes the * type of DIMM module in use for each chip-select pair. * Prior ro revision F it also tells us whether BankSwizzle mode * is enabled - in rev F that has moved to dram config hi register. */ mcp->mcp_csbankmapreg = MCREG_VAL32(&baddrmap) = mc_pcicfg_get32(cfghdl, MC_DC_REG_BANKADDRMAP); /* * Determine whether bank swizzle mode is active. Bank swizzling was * introduced as an option in rev E, but the bit that indicates it * is enabled has moved in revs F/G. */ if (MC_REV_MATCH(rev, MC_F_REV_E)) { mcp->mcp_bnkswzl = MCREG_FIELD_F_preF(&baddrmap, BankSwizzleMode); } else if (MC_REV_MATCH(rev, MC_F_REVS_FG)) { mcp->mcp_bnkswzl = MCREG_FIELD_F_revFG(&drcfg_hi, BankSwizzleMode); } /* * Read the DRAM CS Base and DRAM CS Mask registers. Revisions prior * to F have an equal number of base and mask registers; revision F * has twice as many base registers as masks. */ maskdivisor = MC_REV_MATCH(rev, MC_F_REVS_FG) ? 2 : 1; mc_prop_read_pair(cfghdl, (uint32_t *)base, MC_DC_REG_CSBASE_0, MC_CHIP_NCS, (uint32_t *)mask, MC_DC_REG_CSMASK_0, MC_CHIP_NCS / maskdivisor, MC_DC_REG_CS_INCR); /* * Create a cs node for each enabled chip-select as well as * any appointed online spare chip-selects and for any that have * failed test. */ for (i = 0; i < MC_CHIP_NCS; i++) { mc_cs_t *mccs; uint64_t csbase, csmask; size_t sz; int csbe, spare, testfail; if (MC_REV_MATCH(rev, MC_F_REVS_FG)) { csbe = MCREG_FIELD_F_revFG(&base[i], CSEnable); spare = MCREG_FIELD_F_revFG(&base[i], Spare); testfail = MCREG_FIELD_F_revFG(&base[i], TestFail); } else { csbe = MCREG_FIELD_F_preF(&base[i], CSEnable); spare = 0; testfail = 0; } /* Testing hook */ if (testfail_mcnum != -1 && testfail_csnum != -1 && mcp->mcp_num == testfail_mcnum && i == testfail_csnum) { csbe = spare = 0; testfail = 1; cmn_err(CE_NOTE, "Pretending MC %d CS %d failed test", testfail_mcnum, testfail_csnum); } /* * If the chip-select is not enabled then skip it unless * it is a designated online spare or is marked with TestFail. */ if (!csbe && !(spare || testfail)) continue; /* * For an enabled or spare chip-select the Bank Address Mapping * register will be valid as will the chip-select mask. The * base will not be valid but we'll read and store it anyway. * We will not know whether the spare is already swapped in * until MC function 3 attaches. */ if (csbe || spare) { if (mcamd_cs_size(&hdl, (mcamd_node_t *)mc, i, &sz) < 0) continue; csbase = MC_CSBASE(&base[i], rev); csmask = MC_CSMASK(&mask[i / maskdivisor], rev); } else { sz = 0; csbase = csmask = 0; } mccs = mc_cs_create(mc, i, csbase, csmask, sz, csbe, spare, testfail); if (mc->mc_cslist == NULL) mc->mc_cslist = mccs; else mc->mc_cslast->mccs_next = mccs; mc->mc_cslast = mccs; mccs->mccs_cfgregs.csr_csbase = MCREG_VAL32(&base[i]); mccs->mccs_cfgregs.csr_csmask = MCREG_VAL32(&mask[i / maskdivisor]); /* * Check for cs bank interleaving - some bits clear in the * lower mask. All banks must/will have the same lomask bits * if cs interleaving is active. */ if (csbe && !mcp->mcp_csintlvfctr) { int bitno, ibits = 0; for (bitno = MC_CSMASKLO_LOBIT(rev); bitno <= MC_CSMASKLO_HIBIT(rev); bitno++) { if (!(csmask & (1 << bitno))) ibits++; } mcp->mcp_csintlvfctr = 1 << ibits; } } /* * If there is no chip-select interleave on this node determine * whether the chip-select ranks are contiguous or if there * is a hole. */ if (mcp->mcp_csintlvfctr == 1) { mc_cs_t *csp[MC_CHIP_NCS]; mc_cs_t *mccs; int ncsbe = 0; for (mccs = mc->mc_cslist; mccs != NULL; mccs = mccs->mccs_next) { if (mccs->mccs_props.csp_csbe) csp[ncsbe++] = mccs; } if (ncsbe != 0) { qsort((void *)csp, ncsbe, sizeof (mc_cs_t *), (int (*)(const void *, const void *))csbasecmp); for (i = 1; i < ncsbe; i++) { if (csp[i]->mccs_props.csp_base != csp[i - 1]->mccs_props.csp_base + csp[i - 1]->mccs_props.csp_size) mc->mc_csdiscontig = 1; } } } /* * Since we do not attach to MC function 3 go ahead and read some * config parameters from it now. */ mc_getmiscctl(mc); /* * Now that we have discovered all enabled/spare/testfail chip-selects * we divine the associated DIMM configuration. */ mc_dimmlist_create(mc); } typedef struct mc_bind_map { const char *bm_bindnm; /* attachment binding name */ enum mc_funcnum bm_func; /* PCI config space function number for bind */ const char *bm_model; /* value for device node model property */ void (*bm_mkprops)(mc_pcicfg_hdl_t, mc_t *); } mc_bind_map_t; /* * Do not attach to MC function 3 - agpgart already attaches to that. * Function 3 may be a good candidate for a nexus driver to fan it out * into virtual devices by functionality. We will use pci_mech1_getl * to retrieve the function 3 parameters we require. */ static const mc_bind_map_t mc_bind_map[] = { { MC_FUNC_HTCONFIG_BINDNM, MC_FUNC_HTCONFIG, "AMD Memory Controller (HT Configuration)", mc_mkprops_htcfg }, { MC_FUNC_ADDRMAP_BINDNM, MC_FUNC_ADDRMAP, "AMD Memory Controller (Address Map)", mc_mkprops_addrmap }, { MC_FUNC_DRAMCTL_BINDNM, MC_FUNC_DRAMCTL, "AMD Memory Controller (DRAM Controller & HT Trace)", mc_mkprops_dramctl }, NULL }; /*ARGSUSED*/ static int mc_open(dev_t *devp, int flag, int otyp, cred_t *credp) { if (otyp != OTYP_CHR) return (EINVAL); rw_enter(&mc_lock, RW_READER); if (mc_lookup_by_chipid(getminor(*devp)) == NULL) { rw_exit(&mc_lock); return (EINVAL); } rw_exit(&mc_lock); return (0); } /*ARGSUSED*/ static int mc_close(dev_t dev, int flag, int otyp, cred_t *credp) { return (0); } /* * Enable swap from chip-select csnum to the spare chip-select on this * memory controller (if any). */ int mc_swapdonetime = 30; /* max number of seconds to wait for SwapDone */ static int mc_onlinespare(mc_t *mc, int csnum) { mc_props_t *mcp = &mc->mc_props; union mcreg_sparectl sparectl; union mcreg_scrubctl scrubctl; mc_cs_t *mccs; hrtime_t tmax; int i = 0; ASSERT(RW_WRITE_HELD(&mc_lock)); if (!MC_REV_MATCH(mcp->mcp_rev, MC_F_REVS_FG)) return (ENOTSUP); /* MC rev does not offer online spare */ else if (mcp->mcp_sparecs == MC_INVALNUM) return (ENODEV); /* Supported, but no spare configured */ else if (mcp->mcp_badcs != MC_INVALNUM) return (EBUSY); /* Spare already swapped in */ else if (csnum == mcp->mcp_sparecs) return (EINVAL); /* Can't spare the spare! */ for (mccs = mc->mc_cslist; mccs != NULL; mccs = mccs->mccs_next) { if (mccs->mccs_props.csp_num == csnum) break; } if (mccs == NULL) return (EINVAL); /* nominated bad CS does not exist */ /* * If the DRAM Scrubber is not enabled then the swap cannot succeed. */ MCREG_VAL32(&scrubctl) = mc_pcicfg_get32_nohdl(mc, MC_FUNC_MISCCTL, MC_CTL_REG_SCRUBCTL); if (MCREG_FIELD_CMN(&scrubctl, DramScrub) == 0) return (ENODEV); /* DRAM scrubber not enabled */ /* * Read Online Spare Comtrol Register again, just in case our * state does not reflect reality. */ MCREG_VAL32(&sparectl) = mc_pcicfg_get32_nohdl(mc, MC_FUNC_MISCCTL, MC_CTL_REG_SPARECTL); if (MCREG_FIELD_F_revFG(&sparectl, SwapDone)) return (EBUSY); /* Write to the BadDramCs field */ MCREG_FIELD_F_revFG(&sparectl, BadDramCs) = csnum; mc_pcicfg_put32_nohdl(mc, MC_FUNC_MISCCTL, MC_CTL_REG_SPARECTL, MCREG_VAL32(&sparectl)); /* And request that the swap to the spare start */ MCREG_FIELD_F_revFG(&sparectl, SwapEn) = 1; mc_pcicfg_put32_nohdl(mc, MC_FUNC_MISCCTL, MC_CTL_REG_SPARECTL, MCREG_VAL32(&sparectl)); /* * Poll for SwapDone - we have disabled notification by interrupt. * Swap takes "several CPU cycles, depending on the DRAM speed, but * is performed in the background" (Family 0Fh Bios Porting Guide). * We're in a slow ioctl path so there is no harm in waiting around * a bit - consumers of the ioctl must be aware that it may take * a moment. We will poll for up to mc_swapdonetime seconds, * limiting that to 120s. * * The swap is performed by the DRAM scrubber (which must be enabled) * whose scrub rate is accelerated for the duration of the swap. * The maximum swap rate is 40.0ns per 64 bytes, so the maximum * supported cs size of 16GB would take 10.7s at that max rate * of 25000000 scrubs/second. */ tmax = gethrtime() + MIN(mc_swapdonetime, 120) * 1000000000ULL; do { if (i++ < 20) delay(drv_usectohz(100000)); /* 0.1s for up to 2s */ else delay(drv_usectohz(500000)); /* 0.5s */ MCREG_VAL32(&sparectl) = mc_pcicfg_get32_nohdl(mc, MC_FUNC_MISCCTL, MC_CTL_REG_SPARECTL); } while (!MCREG_FIELD_F_revFG(&sparectl, SwapDone) && gethrtime() < tmax); if (!MCREG_FIELD_F_revFG(&sparectl, SwapDone)) return (ETIME); /* Operation timed out */ mcp->mcp_badcs = csnum; mc->mc_cfgregs.mcr_sparectl = MCREG_VAL32(&sparectl); mc->mc_spareswaptime = gethrtime(); return (0); } /*ARGSUSED*/ static int mc_ioctl(dev_t dev, int cmd, intptr_t arg, int mode, cred_t *credp, int *rvalp) { int rc = 0; mc_t *mc; if (cmd != MC_IOC_SNAPSHOT_INFO && cmd != MC_IOC_SNAPSHOT && cmd != MC_IOC_ONLINESPARE_EN) return (EINVAL); rw_enter(&mc_lock, RW_READER); if ((mc = mc_lookup_by_chipid(getminor(dev))) == NULL) { rw_exit(&mc_lock); return (EINVAL); } switch (cmd) { case MC_IOC_SNAPSHOT_INFO: { mc_snapshot_info_t mcs; if (mc_snapshot_update(mc) < 0) { rw_exit(&mc_lock); return (EIO); } mcs.mcs_size = mc->mc_snapshotsz; mcs.mcs_gen = mc->mc_snapshotgen; if (ddi_copyout(&mcs, (void *)arg, sizeof (mc_snapshot_info_t), mode) < 0) rc = EFAULT; break; } case MC_IOC_SNAPSHOT: if (mc_snapshot_update(mc) < 0) { rw_exit(&mc_lock); return (EIO); } if (ddi_copyout(mc->mc_snapshot, (void *)arg, mc->mc_snapshotsz, mode) < 0) rc = EFAULT; break; case MC_IOC_ONLINESPARE_EN: if (drv_priv(credp) != 0) { rw_exit(&mc_lock); return (EPERM); } if (!rw_tryupgrade(&mc_lock)) { rw_exit(&mc_lock); return (EAGAIN); } if ((rc = mc_onlinespare(mc, (int)arg)) == 0) { mc_snapshot_destroy(mc); nvlist_free(mc->mc_nvl); mc->mc_nvl = mc_nvl_create(mc); } break; } rw_exit(&mc_lock); return (rc); } static struct cb_ops mc_cb_ops = { mc_open, mc_close, nodev, /* not a block driver */ nodev, /* no print routine */ nodev, /* no dump routine */ nodev, /* no read routine */ nodev, /* no write routine */ mc_ioctl, nodev, /* no devmap routine */ nodev, /* no mmap routine */ nodev, /* no segmap routine */ nochpoll, /* no chpoll routine */ ddi_prop_op, 0, /* not a STREAMS driver */ D_NEW | D_MP, /* safe for multi-thread/multi-processor */ }; /*ARGSUSED*/ static int mc_getinfo(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg, void **result) { int rc = DDI_SUCCESS; mc_t *mc; if (infocmd != DDI_INFO_DEVT2DEVINFO && infocmd != DDI_INFO_DEVT2INSTANCE) { *result = NULL; return (DDI_FAILURE); } rw_enter(&mc_lock, RW_READER); if ((mc = mc_lookup_by_chipid(getminor((dev_t)arg))) == NULL || mc->mc_funcs[MC_FUNC_DEVIMAP].mcf_devi == NULL) { rc = DDI_FAILURE; } else if (infocmd == DDI_INFO_DEVT2DEVINFO) { *result = mc->mc_funcs[MC_FUNC_DEVIMAP].mcf_devi; } else { *result = (void *)(uintptr_t) mc->mc_funcs[MC_FUNC_DEVIMAP].mcf_instance; } rw_exit(&mc_lock); return (rc); } /*ARGSUSED2*/ static int mc_fm_handle(dev_info_t *dip, ddi_fm_error_t *fmerr, const void *arg) { pci_ereport_post(dip, fmerr, NULL); return (fmerr->fme_status); } static void mc_fm_init(dev_info_t *dip) { int fmcap = DDI_FM_EREPORT_CAPABLE | DDI_FM_ERRCB_CAPABLE; ddi_fm_init(dip, &fmcap, NULL); pci_ereport_setup(dip); ddi_fm_handler_register(dip, mc_fm_handle, NULL); } /*ARGSUSED*/ static int mc_create_cb(cmi_hdl_t whdl, void *arg1, void *arg2, void *arg3) { chipid_t chipid = *((chipid_t *)arg1); cmi_hdl_t *hdlp = (cmi_hdl_t *)arg2; if (cmi_hdl_chipid(whdl) == chipid) { cmi_hdl_hold(whdl); /* short-term hold */ *hdlp = whdl; return (CMI_HDL_WALK_DONE); } else { return (CMI_HDL_WALK_NEXT); } } static mc_t * mc_create(chipid_t chipid) { mc_t *mc; cmi_hdl_t hdl = NULL; ASSERT(RW_WRITE_HELD(&mc_lock)); /* * Find a handle for one of a chip's CPU. * * We can use one of the chip's CPUs since all cores * of a chip share the same revision and socket type. */ cmi_hdl_walk(mc_create_cb, (void *)&chipid, (void *)&hdl, NULL); if (hdl == NULL) return (NULL); /* no cpu for this chipid found! */ mc = kmem_zalloc(sizeof (mc_t), KM_SLEEP); mc->mc_hdr.mch_type = MC_NT_MC; mc->mc_props.mcp_num = chipid; mc->mc_props.mcp_sparecs = MC_INVALNUM; mc->mc_props.mcp_badcs = MC_INVALNUM; mc->mc_props.mcp_rev = cmi_hdl_chiprev(hdl); mc->mc_revname = cmi_hdl_chiprevstr(hdl); mc->mc_socket = cmi_hdl_getsockettype(hdl); if (mc_list == NULL) mc_list = mc; if (mc_last != NULL) mc_last->mc_next = mc; mc->mc_next = NULL; mc_last = mc; cmi_hdl_rele(hdl); return (mc); } /* * Return the maximum scrubbing rate between r1 and r2, where r2 is extracted * from the specified 'cfg' register value using 'mask' and 'shift'. If a * value is zero, scrubbing is off so return the opposite value. Otherwise * the maximum rate is the smallest non-zero value of the two values. */ static uint32_t mc_scrubber_max(uint32_t r1, uint32_t cfg, uint32_t mask, uint32_t shift) { uint32_t r2 = (cfg & mask) >> shift; if (r1 != 0 && r2 != 0) return (MIN(r1, r2)); return (r1 ? r1 : r2); } /* * Enable the memory scrubber. We must use the mc_pcicfg_{get32,put32}_nohdl * interfaces since we do not bind to function 3. */ cmi_errno_t mc_scrubber_enable(mc_t *mc) { mc_props_t *mcp = &mc->mc_props; mc_cfgregs_t *mcr = &mc->mc_cfgregs; union mcreg_scrubctl scrubctl; union mcreg_dramscrublo dalo; union mcreg_dramscrubhi dahi; mcr->mcr_scrubctl = MCREG_VAL32(&scrubctl) = mc_pcicfg_get32_nohdl(mc, MC_FUNC_MISCCTL, MC_CTL_REG_SCRUBCTL); mcr->mcr_scrubaddrlo = MCREG_VAL32(&dalo) = mc_pcicfg_get32_nohdl(mc, MC_FUNC_MISCCTL, MC_CTL_REG_SCRUBADDR_LO); mcr->mcr_scrubaddrhi = MCREG_VAL32(&dahi) = mc_pcicfg_get32_nohdl(mc, MC_FUNC_MISCCTL, MC_CTL_REG_SCRUBADDR_HI); if (mc_scrub_policy == MC_SCRUB_BIOSDEFAULT) return (MCREG_FIELD_CMN(&scrubctl, DramScrub) != AMD_NB_SCRUBCTL_RATE_NONE ? CMI_SUCCESS : CMIERR_MC_NOMEMSCRUB); /* * Disable DRAM scrubbing while we fiddle. */ MCREG_FIELD_CMN(&scrubctl, DramScrub) = AMD_NB_SCRUBCTL_RATE_NONE; mc_pcicfg_put32_nohdl(mc, MC_FUNC_MISCCTL, MC_CTL_REG_SCRUBCTL, MCREG_VAL32(&scrubctl)); /* * Setup DRAM Scrub Address Low and High registers for the * base address of this node, and to select srubber redirect. */ MCREG_FIELD_CMN(&dalo, ScrubReDirEn) = 1; MCREG_FIELD_CMN(&dalo, ScrubAddrLo) = AMD_NB_SCRUBADDR_MKLO(mcp->mcp_base); MCREG_FIELD_CMN(&dahi, ScrubAddrHi) = AMD_NB_SCRUBADDR_MKHI(mcp->mcp_base); mc_pcicfg_put32_nohdl(mc, MC_FUNC_MISCCTL, MC_CTL_REG_SCRUBADDR_LO, MCREG_VAL32(&dalo)); mc_pcicfg_put32_nohdl(mc, MC_FUNC_MISCCTL, MC_CTL_REG_SCRUBADDR_HI, MCREG_VAL32(&dahi)); if (mc_scrub_rate_dram > AMD_NB_SCRUBCTL_RATE_MAX) { cmn_err(CE_WARN, "mc_scrub_rate_dram is too large; " "resetting to 0x%x\n", AMD_NB_SCRUBCTL_RATE_MAX); mc_scrub_rate_dram = AMD_NB_SCRUBCTL_RATE_MAX; } switch (mc_scrub_policy) { case MC_SCRUB_FIXED: /* Use the system value checked above */ break; default: cmn_err(CE_WARN, "Unknown mc_scrub_policy value %d - " "using default policy of MC_SCRUB_MAX", mc_scrub_policy); /*FALLTHRU*/ case MC_SCRUB_MAX: mc_scrub_rate_dram = mc_scrubber_max(mc_scrub_rate_dram, mcr->mcr_scrubctl, AMD_NB_SCRUBCTL_DRAM_MASK, AMD_NB_SCRUBCTL_DRAM_SHIFT); break; } #ifdef OPTERON_ERRATUM_99 /* * This erratum applies on revisions D and earlier. * * Do not enable the dram scrubber is the chip-select ranges * for the node are not contiguous. */ if (mc_scrub_rate_dram != AMD_NB_SCRUBCTL_RATE_NONE && mc->mc_csdiscontig && !X86_CHIPREV_ATLEAST(rev, X86_CHIPREV_AMD_F_REV_E)) { cmn_err(CE_CONT, "?Opteron DRAM scrubber disabled on revision " "%s chip %d because DRAM hole is present on this node", mc->mc_revname, chipid); mc_scrub_rate_dram = AMD_NB_SCRUBCTL_RATE_NONE; } #endif #ifdef OPTERON_ERRATUM_101 /* * This erratum applies on revisions D and earlier. * * If the DRAM Base Address register's IntlvEn field indicates that * node interleaving is enabled, we must disable the DRAM scrubber * and return zero to indicate that Solaris should use s/w instead. */ if (mc_scrub_rate_dram != AMD_NB_SCRUBCTL_RATE_NONE && mcp->mcp_ilen != 0 && !X86_CHIPREV_ATLEAST(rev, X86_CHIPREV_AMD_F_REV_E)) { cmn_err(CE_CONT, "?Opteron DRAM scrubber disabled on revision " "%s chip %d because DRAM memory is node-interleaved", mc->mc_revname, chipid); mc_scrub_rate_dram = AMD_NB_SCRUBCTL_RATE_NONE; } #endif if (mc_scrub_rate_dram != AMD_NB_SCRUBCTL_RATE_NONE) { MCREG_FIELD_CMN(&scrubctl, DramScrub) = mc_scrub_rate_dram; mc_pcicfg_put32_nohdl(mc, MC_FUNC_MISCCTL, MC_CTL_REG_SCRUBCTL, MCREG_VAL32(&scrubctl)); } return (mc_scrub_rate_dram != AMD_NB_SCRUBCTL_RATE_NONE ? CMI_SUCCESS : CMIERR_MC_NOMEMSCRUB); } /*ARGSUSED*/ static int mc_attach_cb(cmi_hdl_t whdl, void *arg1, void *arg2, void *arg3) { mc_t *mc = (mc_t *)arg1; mcamd_prop_t chipid = *((mcamd_prop_t *)arg2); if (cmi_hdl_chipid(whdl) == chipid) { mcamd_mc_register(whdl, mc); } return (CMI_HDL_WALK_NEXT); } static int mc_sw_scrub_disabled = 0; static int mc_attach(dev_info_t *dip, ddi_attach_cmd_t cmd) { mc_pcicfg_hdl_t cfghdl; const mc_bind_map_t *bm; const char *bindnm; char *unitstr = NULL; enum mc_funcnum func; long unitaddr; int chipid, rc; mc_t *mc; /* * This driver has no hardware state, but does * claim to have a reg property, so it will be * called on suspend. It is probably better to * make sure it doesn't get called on suspend, * but it is just as easy to make sure we just * return DDI_SUCCESS if called. */ if (cmd == DDI_RESUME) return (DDI_SUCCESS); if (cmd != DDI_ATTACH || mc_no_attach != 0) return (DDI_FAILURE); bindnm = ddi_binding_name(dip); for (bm = mc_bind_map; bm->bm_bindnm != NULL; bm++) { if (strcmp(bindnm, bm->bm_bindnm) == 0) { func = bm->bm_func; break; } } if (bm->bm_bindnm == NULL) return (DDI_FAILURE); /* * We need the device number, which corresponds to the processor node * number plus 24. The node number can then be used to associate this * memory controller device with a given processor chip. */ if (ddi_prop_lookup_string(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "unit-address", &unitstr) != DDI_PROP_SUCCESS) { cmn_err(CE_WARN, "failed to find unit-address for %s", bindnm); return (DDI_FAILURE); } rc = ddi_strtol(unitstr, NULL, 16, &unitaddr); ASSERT(rc == 0 && unitaddr >= MC_AMD_DEV_OFFSET); if (rc != 0 || unitaddr < MC_AMD_DEV_OFFSET) { cmn_err(CE_WARN, "failed to parse unit address %s for %s\n", unitstr, bindnm); ddi_prop_free(unitstr); return (DDI_FAILURE); } ddi_prop_free(unitstr); chipid = unitaddr - MC_AMD_DEV_OFFSET; rw_enter(&mc_lock, RW_WRITER); for (mc = mc_list; mc != NULL; mc = mc->mc_next) { if (mc->mc_props.mcp_num == chipid) break; } /* Integrate this memory controller device into existing set */ if (mc == NULL) { mc = mc_create(chipid); if (mc == NULL) { /* * We don't complain here because this is a legitimate * path for MP systems. On those machines, we'll attach * before all CPUs have been initialized, and thus the * chip verification in mc_create will fail. We'll be * reattached later for those CPUs. */ rw_exit(&mc_lock); return (DDI_FAILURE); } } else { mc_snapshot_destroy(mc); } /* Beyond this point, we're committed to creating this node */ mc_fm_init(dip); ASSERT(mc->mc_funcs[func].mcf_devi == NULL); mc->mc_funcs[func].mcf_devi = dip; mc->mc_funcs[func].mcf_instance = ddi_get_instance(dip); mc->mc_ref++; /* * Add the common properties to this node, and then add any properties * that are specific to this node based upon its configuration space. */ (void) ddi_prop_update_string(DDI_DEV_T_NONE, dip, "model", (char *)bm->bm_model); (void) ddi_prop_update_int(DDI_DEV_T_NONE, dip, "chip-id", mc->mc_props.mcp_num); if (bm->bm_mkprops != NULL && mc_pcicfg_setup(mc, bm->bm_func, &cfghdl) == DDI_SUCCESS) { bm->bm_mkprops(cfghdl, mc); mc_pcicfg_teardown(cfghdl); } /* * If this is the last node to be attached for this memory controller, * then create the minor node, enable scrubbers, and register with * cpu module(s) for this chip. */ if (func == MC_FUNC_DEVIMAP) { mc_props_t *mcp = &mc->mc_props; int dram_present = 0; if (ddi_create_minor_node(dip, "mc-amd", S_IFCHR, mcp->mcp_num, "ddi_mem_ctrl", 0) != DDI_SUCCESS) { cmn_err(CE_WARN, "failed to create minor node for chip " "%d memory controller\n", (chipid_t)mcp->mcp_num); } /* * Register the memory controller for every CPU of this chip. * * If there is memory present on this node and ECC is enabled * attempt to enable h/w memory scrubbers for this node. * If we are successful in enabling *any* hardware scrubbers, * disable the software memory scrubber. */ cmi_hdl_walk(mc_attach_cb, (void *)mc, (void *)&mcp->mcp_num, NULL); if (mcp->mcp_lim != mcp->mcp_base) { /* * This node may map non-dram memory alone, so we * must check for an enabled chip-select to be * sure there is dram present. */ mc_cs_t *mccs; for (mccs = mc->mc_cslist; mccs != NULL; mccs = mccs->mccs_next) { if (mccs->mccs_props.csp_csbe) { dram_present = 1; break; } } } if (dram_present && !mc_ecc_enabled(mc)) { /* * On a single chip system there is no point in * scrubbing if there is no ECC on the single node. * On a multichip system, necessarily Opteron using * registered ECC-capable DIMMs, if there is memory * present on a node but no ECC there then we'll assume * ECC is disabled for all nodes and we will not enable * the scrubber and wll also disable the software * memscrub thread. */ rc = 1; } else if (!dram_present) { /* No memory on this node - others decide memscrub */ rc = 0; } else { /* * There is memory on this node and ECC is enabled. * Call via the cpu module to enable memory scrubbing * on this node - we could call directly but then * we may overlap with a request to enable chip-cache * scrubbing. */ rc = mc_scrubber_enable(mc); } if (rc == CMI_SUCCESS && !mc_sw_scrub_disabled++) cmi_mc_sw_memscrub_disable(); mc_report_testfails(mc); } /* * Update nvlist for as far as we have gotten in attach/init. */ nvlist_free(mc->mc_nvl); mc->mc_nvl = mc_nvl_create(mc); rw_exit(&mc_lock); return (DDI_SUCCESS); } /*ARGSUSED*/ static int mc_detach(dev_info_t *dip, ddi_detach_cmd_t cmd) { /* * See the comment about suspend in * mc_attach(). */ if (cmd == DDI_SUSPEND) return (DDI_SUCCESS); else return (DDI_FAILURE); } static struct dev_ops mc_ops = { DEVO_REV, /* devo_rev */ 0, /* devo_refcnt */ mc_getinfo, /* devo_getinfo */ nulldev, /* devo_identify */ nulldev, /* devo_probe */ mc_attach, /* devo_attach */ mc_detach, /* devo_detach */ nodev, /* devo_reset */ &mc_cb_ops, /* devo_cb_ops */ NULL, /* devo_bus_ops */ NULL, /* devo_power */ ddi_quiesce_not_needed, /* devo_quiesce */ }; static struct modldrv modldrv = { &mod_driverops, "Memory Controller for AMD processors", &mc_ops }; static struct modlinkage modlinkage = { MODREV_1, (void *)&modldrv, NULL }; int _init(void) { /* * Refuse to load if there is no PCI config space support. */ if (pci_getl_func == NULL) return (ENOTSUP); rw_init(&mc_lock, NULL, RW_DRIVER, NULL); return (mod_install(&modlinkage)); } int _info(struct modinfo *modinfop) { return (mod_info(&modlinkage, modinfop)); } int _fini(void) { int rc; if ((rc = mod_remove(&modlinkage)) != 0) return (rc); rw_destroy(&mc_lock); return (0); }