/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2006 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" #if defined(_KERNEL) #include #include "reloc.h" #else #include #include "sgs.h" #include "machdep.h" #include "libld.h" #include "reloc.h" #include "conv.h" #include "msg.h" #endif /* * This table represents the current relocations that do_reloc() is able to * process. The relocations below that are marked SPECIAL are relocations that * take special processing and shouldn't actually ever be passed to do_reloc(). */ const Rel_entry reloc_table[R_386_NUM] = { /* R_386_NONE */ {FLG_RE_NOTREL, 0}, /* R_386_32 */ {FLG_RE_NOTREL, 4}, /* R_386_PC32 */ {FLG_RE_PCREL, 4}, /* R_386_GOT32 */ {FLG_RE_GOTADD, 4}, /* R_386_PLT32 */ {FLG_RE_PLTREL | FLG_RE_PCREL, 4}, /* R_386_COPY */ {FLG_RE_NOTREL, 0}, /* SPECIAL */ /* R_386_GLOB_DAT */ {FLG_RE_NOTREL, 4}, /* R_386_JMP_SLOT */ {FLG_RE_NOTREL, 4}, /* SPECIAL */ /* R_386_RELATIVE */ {FLG_RE_NOTREL, 4}, /* R_386_GOTOFF */ {FLG_RE_GOTREL, 4}, /* R_386_GOTPC */ {FLG_RE_PCREL | FLG_RE_GOTPC | FLG_RE_LOCLBND, 4}, /* R_386_32PLT */ {FLG_RE_PLTREL, 4}, /* R_386_TLS_GD_PLT */ {FLG_RE_TLSINS | FLG_RE_PLTREL | FLG_RE_PCREL | FLG_RE_TLSGD, 4}, /* R_386_TLS_LDM_PLT */ {FLG_RE_TLSINS | FLG_RE_PLTREL | FLG_RE_PCREL | FLG_RE_TLSLD, 4}, /* R_386_TLS_TPOFF */ {FLG_RE_NOTREL, 4}, /* R_386_TLS_IE */ {FLG_RE_GOTADD | FLG_RE_TLSINS | FLG_RE_TLSIE, 4}, /* R_386_TLS_GOTIE */ {FLG_RE_GOTADD | FLG_RE_TLSINS | FLG_RE_TLSIE, 4}, /* R_386_TLS_LE */ {FLG_RE_TLSINS | FLG_RE_TLSLE, 4}, /* R_386_TLS_GD */ {FLG_RE_GOTADD | FLG_RE_TLSINS | FLG_RE_TLSGD, 4}, /* R_386_TLS_LDM */ {FLG_RE_GOTADD | FLG_RE_TLSLD | FLG_RE_TLSINS, 4}, /* R_386_16 */ {FLG_RE_NOTREL, 2}, /* R_386_PC16 */ {FLG_RE_PCREL, 2}, /* R_386_8 */ {FLG_RE_NOTREL, 1}, /* R_386_PC8 */ {FLG_RE_PCREL, 1}, /* R_386_UNKNOWN24 */ {FLG_RE_NOTSUP, 0}, /* R_386_UNKNOWN25 */ {FLG_RE_NOTSUP, 0}, /* R_386_UNKNOWN26 */ {FLG_RE_NOTSUP, 0}, /* R_386_UNKNOWN27 */ {FLG_RE_NOTSUP, 0}, /* R_386_UNKNOWN28 */ {FLG_RE_NOTSUP, 0}, /* R_386_UNKNOWN29 */ {FLG_RE_NOTSUP, 0}, /* R_386_UNKNOWN30 */ {FLG_RE_NOTSUP, 0}, /* R_386_UNKNOWN31 */ {FLG_RE_NOTSUP, 0}, /* R_386_TLS_LDO_32 */ {FLG_RE_TLSINS | FLG_RE_TLSLD, 4}, /* R_386_UNKNOWN33 */ {FLG_RE_NOTSUP, 0}, /* R_386_UNKNOWN34 */ {FLG_RE_NOTSUP, 0}, /* R_386_TLS_DTPMOD32 */ {FLG_RE_NOTREL, 4}, /* R_386_TLS_DTPOFF32 */ {FLG_RE_NOTREL, 4}, /* R_386_UNKONWN37 */ {FLG_RE_NOTSUP, 0} }; /* * Write a single relocated value to its reference location. * We assume we wish to add the relocation amount, value, to the * value of the address already present at the offset. * * NAME VALUE FIELD CALCULATION * * R_386_NONE 0 none none * R_386_32 1 word32 S + A * R_386_PC32 2 word32 S + A - P * R_386_GOT32 3 word32 G + A - P * R_386_PLT32 4 word32 L + A - P * R_386_COPY 5 none none * R_386_GLOB_DAT 6 word32 S * R_386_JMP_SLOT 7 word32 S * R_386_RELATIVE 8 word32 B + A * R_386_GOTOFF 9 word32 S + A - GOT * R_386_GOTPC 10 word32 GOT + A - P * R_386_32PLT 11 word32 L + A * R_386_TLS_GD_PLT 12 word32 @tlsgdplt * R_386_TLS_LDM_PLT 13 word32 @tlsldmplt * R_386_TLS_TPOFF 14 word32 @ntpoff(S) * R_386_TLS_IE 15 word32 @indntpoff(S) * R_386_TLS_GD 18 word32 @tlsgd(S) * R_386_TLS_LDM 19 word32 @tlsldm(S) * R_386_16 20 word16 S + A * R_386_PC16 21 word16 S + A - P * R_386_8 22 word8 S + A * R_386_PC8 23 word8 S + A - P * R_386_TLS_LDO_32 32 word32 @dtpoff(S) * R_386_TLS_DTPMOD32 35 word32 @dtpmod(S) * R_386_TLS_DTPOFF32 36 word32 @dtpoff(S) * * Relocations 0-10 are from Figure 4-4: Relocation Types from the * intel ABI. Relocation 11 (R_386_32PLT) is from the C++ intel abi * and is in the process of being registered with intel ABI (1/13/94). * * Relocations R_386_TLS_* are added to support Thread-Local storage * as recorded in PSARC/2001/509 * * Relocation calculations: * * CALCULATION uses the following notation: * A the addend used * B the base address of the shared object in memory * G the offset into the global offset table * GOT the address of teh global offset table * L the procedure linkage entry * P the place of the storage unit being relocated * S the value of the symbol * * @dtlndx(x): Allocate two contiguous entries in the GOT table to hold * a Tls_index structure (for passing to __tls_get_addr()). The * instructions referencing this entry will be bound to the first * of the two GOT entries. * * @tmndx(x): Allocate two contiguous entries in the GOT table to hold * a Tls_index structure (for passing to __tls_get_addr()). The * ti_offset field of the Tls_index will be set to 0 (zero) and the * ti_module will be filled in at run-time. The call to * __tls_get_addr() will return the starting offset of the dynamic * TLS block. * * @dtpoff(x): calculate the tlsoffset relative to the TLS block. * * @tpoff(x): calculate the tlsoffset relative to the TLS block. * * @dtpmod(x): calculate the module id of the object containing symbol x. * * The calculations in the CALCULATION column are assumed to have * been performed before calling this function except for the addition of * the addresses in the instructions. */ /* ARGSUSED5 */ int do_reloc(uchar_t rtype, uchar_t *off, Xword *value, const char *sym, const char *file, void *lml) { const Rel_entry *rep; rep = &reloc_table[rtype]; switch (rep->re_fsize) { case 1: /* LINTED */ *((uchar_t *)off) += (uchar_t)(*value); break; case 2: /* LINTED */ *((Half *)off) += (Half)(*value); break; case 4: /* LINTED */ *((Xword *)off) += *value; break; default: /* * To keep chkmsg() happy: MSG_INTL(MSG_REL_UNSUPSZ) */ REL_ERR_UNSUPSZ(lml, file, sym, rtype, rep->re_fsize); return (0); } return (1); }