/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2007 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef __xpv #include #endif caddr_t i86devmap(pfn_t pf, pgcnt_t pgcnt, uint_t prot) { caddr_t addr; caddr_t addr1; page_t *pp; addr1 = addr = vmem_alloc(heap_arena, mmu_ptob(pgcnt), VM_SLEEP); for (; pgcnt != 0; addr += MMU_PAGESIZE, ++pf, --pgcnt) { pp = page_numtopp_nolock(pf); if (pp == NULL) { hat_devload(kas.a_hat, addr, MMU_PAGESIZE, pf, prot | HAT_NOSYNC, HAT_LOAD_LOCK); } else { hat_memload(kas.a_hat, addr, pp, prot | HAT_NOSYNC, HAT_LOAD_LOCK); } } return (addr1); } /* * This routine is like page_numtopp, but accepts only free pages, which * it allocates (unfrees) and returns with the exclusive lock held. * It is used by machdep.c/dma_init() to find contiguous free pages. * * XXX this and some others should probably be in vm_machdep.c */ page_t * page_numtopp_alloc(pfn_t pfnum) { page_t *pp; retry: pp = page_numtopp_nolock(pfnum); if (pp == NULL) { return (NULL); } if (!page_trylock(pp, SE_EXCL)) { return (NULL); } if (page_pptonum(pp) != pfnum) { page_unlock(pp); goto retry; } if (!PP_ISFREE(pp)) { page_unlock(pp); return (NULL); } if (pp->p_szc) { page_demote_free_pages(pp); page_unlock(pp); goto retry; } /* If associated with a vnode, destroy mappings */ if (pp->p_vnode) { page_destroy_free(pp); if (!page_lock(pp, SE_EXCL, (kmutex_t *)NULL, P_NO_RECLAIM)) { return (NULL); } if (page_pptonum(pp) != pfnum) { page_unlock(pp); goto retry; } } if (!PP_ISFREE(pp) || !page_reclaim(pp, (kmutex_t *)NULL)) { page_unlock(pp); return (NULL); } return (pp); } /* * Flag is not set early in boot. Once it is set we are no longer * using boot's page tables. */ uint_t khat_running = 0; /* * This procedure is callable only while the boot loader is in charge of the * MMU. It assumes that PA == VA for page table pointers. It doesn't live in * kboot_mmu.c since it's used from common code. */ pfn_t va_to_pfn(void *vaddr) { uintptr_t des_va = ALIGN2PAGE(vaddr); uintptr_t va = des_va; size_t len; uint_t prot; pfn_t pfn; if (khat_running) panic("va_to_pfn(): called too late\n"); if (kbm_probe(&va, &len, &pfn, &prot) == 0) return (PFN_INVALID); if (va > des_va) return (PFN_INVALID); if (va < des_va) pfn += mmu_btop(des_va - va); return (pfn); } /* * Initialize a special area in the kernel that always holds some PTEs for * faster performance. This always holds segmap's PTEs. * In the 32 bit kernel this maps the kernel heap too. */ void hat_kmap_init(uintptr_t base, size_t len) { uintptr_t map_addr; /* base rounded down to large page size */ uintptr_t map_eaddr; /* base + len rounded up */ size_t map_len; caddr_t ptes; /* mapping area in kernel for kmap ptes */ size_t window_size; /* size of mapping area for ptes */ ulong_t htable_cnt; /* # of page tables to cover map_len */ ulong_t i; htable_t *ht; uintptr_t va; /* * We have to map in an area that matches an entire page table. * The PTEs are large page aligned to avoid spurious pagefaults * on the hypervisor. */ map_addr = base & LEVEL_MASK(1); map_eaddr = (base + len + LEVEL_SIZE(1) - 1) & LEVEL_MASK(1); map_len = map_eaddr - map_addr; window_size = mmu_btop(map_len) * mmu.pte_size; window_size = (window_size + LEVEL_SIZE(1)) & LEVEL_MASK(1); htable_cnt = map_len >> LEVEL_SHIFT(1); /* * allocate vmem for the kmap_ptes */ ptes = vmem_xalloc(heap_arena, window_size, LEVEL_SIZE(1), 0, 0, NULL, NULL, VM_SLEEP); mmu.kmap_htables = kmem_alloc(htable_cnt * sizeof (htable_t *), KM_SLEEP); /* * Map the page tables that cover kmap into the allocated range. * Note we don't ever htable_release() the kmap page tables - they * can't ever be stolen, freed, etc. */ for (va = map_addr, i = 0; i < htable_cnt; va += LEVEL_SIZE(1), ++i) { ht = htable_create(kas.a_hat, va, 0, NULL); if (ht == NULL) panic("hat_kmap_init: ht == NULL"); mmu.kmap_htables[i] = ht; hat_devload(kas.a_hat, ptes + i * MMU_PAGESIZE, MMU_PAGESIZE, ht->ht_pfn, #ifdef __xpv PROT_READ | HAT_NOSYNC | HAT_UNORDERED_OK, #else PROT_READ | PROT_WRITE | HAT_NOSYNC | HAT_UNORDERED_OK, #endif HAT_LOAD | HAT_LOAD_NOCONSIST); } /* * set information in mmu to activate handling of kmap */ mmu.kmap_addr = map_addr; mmu.kmap_eaddr = map_eaddr; mmu.kmap_ptes = (x86pte_t *)ptes; } extern caddr_t kpm_vbase; extern size_t kpm_size; #ifdef __xpv /* * Create the initial segkpm mappings for the hypervisor. To avoid having * to deal with page tables being read only, we make all mappings * read only at first. */ static void xen_kpm_create(paddr_t paddr, level_t lvl) { ulong_t pg_off; for (pg_off = 0; pg_off < LEVEL_SIZE(lvl); pg_off += MMU_PAGESIZE) { kbm_map((uintptr_t)kpm_vbase + paddr, (paddr_t)0, 0, 1); kbm_read_only((uintptr_t)kpm_vbase + paddr + pg_off, paddr + pg_off); } } /* * Try to make all kpm mappings writable. Failures are ok, as those * are just pagetable, GDT, etc. pages. */ static void xen_kpm_finish_init(void) { pfn_t gdtpfn = mmu_btop(CPU->cpu_m.mcpu_gdtpa); pfn_t pfn; page_t *pp; for (pfn = 0; pfn < mfn_count; ++pfn) { /* * skip gdt */ if (pfn == gdtpfn) continue; /* * p_index is a hint that this is a pagetable */ pp = page_numtopp_nolock(pfn); if (pp && pp->p_index) { pp->p_index = 0; continue; } (void) xen_kpm_page(pfn, PT_VALID | PT_WRITABLE); } } #endif /* * Routine to pre-allocate data structures for hat_kern_setup(). It computes * how many pagetables it needs by walking the boot loader's page tables. */ /*ARGSUSED*/ void hat_kern_alloc( caddr_t segmap_base, size_t segmap_size, caddr_t ekernelheap) { uintptr_t last_va = (uintptr_t)-1; /* catch 1st time */ uintptr_t va = 0; size_t size; pfn_t pfn; uint_t prot; uint_t table_cnt = 1; uint_t mapping_cnt; level_t start_level; level_t l; struct memlist *pmem; level_t lpagel = mmu.max_page_level; uint64_t paddr; int64_t psize; int nwindows; if (kpm_size > 0) { /* * Create the kpm page tables. When running on the * hypervisor these are made read/only at first. * Later we'll add write permission where possible. */ for (pmem = phys_install; pmem; pmem = pmem->next) { paddr = pmem->address; psize = pmem->size; while (psize >= MMU_PAGESIZE) { if ((paddr & LEVEL_OFFSET(lpagel)) == 0 && psize > LEVEL_SIZE(lpagel)) l = lpagel; else l = 0; #if defined(__xpv) /* * Create read/only mappings to avoid * conflicting with pagetable usage */ xen_kpm_create(paddr, l); #else kbm_map((uintptr_t)kpm_vbase + paddr, paddr, l, 1); #endif paddr += LEVEL_SIZE(l); psize -= LEVEL_SIZE(l); } } } /* * If this machine doesn't have a kpm segment, we need to allocate * a small number of 'windows' which can be used to map pagetables. */ nwindows = (kpm_size == 0) ? 2 * NCPU : 0; #if defined(__xpv) /* * On a hypervisor, these windows are also used by the xpv_panic * code, where we need one window for each level of the pagetable * hierarchy. */ nwindows = MAX(nwindows, mmu.max_level); #endif if (nwindows != 0) { /* * Create the page windows and 1 page of VA in * which we map the PTEs of those windows. */ mmu.pwin_base = vmem_xalloc(heap_arena, nwindows * MMU_PAGESIZE, LEVEL_SIZE(1), 0, 0, NULL, NULL, VM_SLEEP); ASSERT(nwindows <= MMU_PAGESIZE / mmu.pte_size); mmu.pwin_pte_va = vmem_xalloc(heap_arena, MMU_PAGESIZE, MMU_PAGESIZE, 0, 0, NULL, NULL, VM_SLEEP); /* * Find/Create the page table window mappings. */ paddr = 0; (void) find_pte((uintptr_t)mmu.pwin_base, &paddr, 0, 0); ASSERT(paddr != 0); ASSERT((paddr & MMU_PAGEOFFSET) == 0); mmu.pwin_pte_pa = paddr; #ifdef __xpv (void) find_pte((uintptr_t)mmu.pwin_pte_va, NULL, 0, 0); kbm_read_only((uintptr_t)mmu.pwin_pte_va, mmu.pwin_pte_pa); #else kbm_map((uintptr_t)mmu.pwin_pte_va, mmu.pwin_pte_pa, 0, 1); #endif } /* * Walk the boot loader's page tables and figure out * how many tables and page mappings there will be. */ while (kbm_probe(&va, &size, &pfn, &prot) != 0) { /* * At each level, if the last_va falls into a new htable, * increment table_cnt. We can stop at the 1st level where * they are in the same htable. */ if (size == MMU_PAGESIZE) start_level = 0; else start_level = 1; for (l = start_level; l < mmu.max_level; ++l) { if (va >> LEVEL_SHIFT(l + 1) == last_va >> LEVEL_SHIFT(l + 1)) break; ++table_cnt; } last_va = va; va = (va & LEVEL_MASK(1)) + LEVEL_SIZE(1); } /* * Besides the boot loader mappings, we're going to fill in * the entire top level page table for the kernel. Make sure there's * enough reserve for that too. */ table_cnt += mmu.top_level_count - ((kernelbase >> LEVEL_SHIFT(mmu.max_level)) & (mmu.top_level_count - 1)); #if defined(__i386) /* * The 32 bit PAE hat allocates tables one level below the top when * kernelbase isn't 1 Gig aligned. We'll just be sloppy and allocate * a bunch more to the reserve. Any unused will be returned later. * Note we've already counted these mappings, just not the extra * pagetables. */ if (mmu.pae_hat != 0 && (kernelbase & LEVEL_OFFSET(mmu.max_level)) != 0) table_cnt += mmu.ptes_per_table - ((kernelbase & LEVEL_OFFSET(mmu.max_level)) >> LEVEL_SHIFT(mmu.max_level - 1)); #endif /* * Add 1/4 more into table_cnt for extra slop. The unused * slop is freed back when we htable_adjust_reserve() later. */ table_cnt += table_cnt >> 2; /* * We only need mapping entries (hments) for shared pages. * This should be far, far fewer than the total possible, * We'll allocate enough for 1/16 of all possible PTEs. */ mapping_cnt = (table_cnt * mmu.ptes_per_table) >> 4; /* * Now create the initial htable/hment reserves */ htable_initial_reserve(table_cnt); hment_reserve(mapping_cnt); x86pte_cpu_init(CPU); } /* * This routine handles the work of creating the kernel's initial mappings * by deciphering the mappings in the page tables created by the boot program. * * We maintain large page mappings, but only to a level 1 pagesize. * The boot loader can only add new mappings once this function starts. * In particular it can not change the pagesize used for any existing * mappings or this code breaks! */ void hat_kern_setup(void) { /* * Attach htables to the existing pagetables */ /* BEGIN CSTYLED */ htable_attach(kas.a_hat, 0, mmu.max_level, NULL, #ifdef __xpv mmu_btop(xen_info->pt_base - ONE_GIG)); #else mmu_btop(getcr3())); #endif /* END CSTYLED */ #if defined(__i386) && !defined(__xpv) CPU->cpu_tss->tss_cr3 = dftss0.tss_cr3 = getcr3(); #endif /* __i386 */ #if defined(__xpv) && defined(__amd64) /* * Try to make the kpm mappings r/w. Failures here are OK, as * it's probably just a pagetable */ xen_kpm_finish_init(); #endif /* * The kernel HAT is now officially open for business. */ khat_running = 1; CPUSET_ATOMIC_ADD(kas.a_hat->hat_cpus, CPU->cpu_id); CPU->cpu_current_hat = kas.a_hat; }