/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2006 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" /* * ANSI terminal emulator module; parse ANSI X3.64 escape sequences and * the like. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef _HAVE_TEM_FIRMWARE #include #endif /* _HAVE_TEM_FIRMWARE */ #include /* Terminal emulator functions */ static int tem_setup_terminal(struct vis_devinit *, tem_t *, size_t, size_t); static void tem_modechange_callback(tem_t *, struct vis_devinit *); static void tem_free(tem_t *); static int tem_adjust_row(tem_t *, int, cred_t *); /* * Globals */ ldi_ident_t term_li = NULL; extern struct mod_ops mod_miscops; static struct modlmisc modlmisc = { &mod_miscops, /* modops */ "ANSI Terminal Emulator", /* name */ }; static struct modlinkage modlinkage = { MODREV_1, (void *)&modlmisc, NULL }; int _init(void) { int ret; ret = mod_install(&modlinkage); if (ret != 0) return (ret); ret = ldi_ident_from_mod(&modlinkage, &term_li); if (ret != 0) { (void) mod_remove(&modlinkage); return (ret); } return (0); } int _fini() { int ret; ret = mod_remove(&modlinkage); if (ret == 0) { ldi_ident_release(term_li); term_li = NULL; } return (ret); } int _info(struct modinfo *modinfop) { return (mod_info(&modlinkage, modinfop)); } int tem_fini(tem_t *tem) { int lyr_rval; mutex_enter(&tem->lock); ASSERT(tem->hdl != NULL); /* * Allow layered on driver to clean up console private * data. */ (void) ldi_ioctl(tem->hdl, VIS_DEVFINI, 0, FKIOCTL, kcred, &lyr_rval); /* * Close layered on driver */ (void) ldi_close(tem->hdl, NULL, kcred); tem->hdl = NULL; mutex_exit(&tem->lock); tem_free(tem); return (0); } static int tem_init_failed(tem_t *tem, cred_t *credp, boolean_t finish_ioctl) { int lyr_rval; if (finish_ioctl) (void) ldi_ioctl(tem->hdl, VIS_DEVFINI, 0, FWRITE|FKIOCTL, credp, &lyr_rval); (void) ldi_close(tem->hdl, NULL, credp); tem_free(tem); return (ENXIO); } static void tem_free_state(struct tem_state *tems) { ASSERT(tems != NULL); if (tems->a_outbuf != NULL) kmem_free(tems->a_outbuf, tems->a_c_dimension.width); if (tems->a_blank_line != NULL) kmem_free(tems->a_blank_line, tems->a_c_dimension.width); if (tems->a_pix_data != NULL) kmem_free(tems->a_pix_data, tems->a_pix_data_size); kmem_free(tems, sizeof (struct tem_state)); } static void tem_free(tem_t *tem) { ASSERT(tem != NULL); if (tem->state != NULL) tem_free_state(tem->state); kmem_free(tem, sizeof (struct tem)); } /* * This is the main entry point to the module. It handles output requests * during normal system operation, when (e.g.) mutexes are available. */ void tem_write(tem_t *tem, uchar_t *buf, ssize_t len, cred_t *credp) { mutex_enter(&tem->lock); ASSERT(tem->hdl != NULL); tem_check_first_time(tem, credp, CALLED_FROM_NORMAL); tem_terminal_emulate(tem, buf, len, credp, CALLED_FROM_NORMAL); mutex_exit(&tem->lock); } int tem_init(tem_t **ptem, char *pathname, cred_t *credp) { struct vis_devinit devinit; tem_t *tem; size_t height = 0; size_t width = 0; uint32_t row = 0; uint32_t col = 0; char *pathbuf; int err = 0; int lyr_rval; tem = kmem_zalloc(sizeof (struct tem), KM_SLEEP); mutex_init(&tem->lock, (char *)NULL, MUTEX_DRIVER, NULL); #ifdef _HAVE_TEM_FIRMWARE tem->cons_wrtvec = tem_write; #endif /* _HAVE_TEM_FIRMWARE */ /* * Open the layered device using the devfs physical device name * after adding the /devices prefix. */ pathbuf = kmem_alloc(MAXPATHLEN, KM_SLEEP); (void) strcpy(pathbuf, "/devices"); if (i_ddi_prompath_to_devfspath(pathname, pathbuf + strlen("/devices")) != DDI_SUCCESS) { cmn_err(CE_WARN, "terminal emulator: Path conversion error"); kmem_free(pathbuf, MAXPATHLEN); tem_free(tem); return (ENXIO); } if (ldi_open_by_name(pathbuf, FWRITE, credp, &tem->hdl, term_li) != 0) { cmn_err(CE_WARN, "terminal emulator: Device path open error"); kmem_free(pathbuf, MAXPATHLEN); tem_free(tem); return (ENXIO); } kmem_free(pathbuf, MAXPATHLEN); devinit.modechg_cb = (vis_modechg_cb_t)tem_modechange_callback; devinit.modechg_arg = (struct vis_modechg_arg *)tem; /* * Initialize the console and get the device parameters */ if ((err = ldi_ioctl(tem->hdl, VIS_DEVINIT, (intptr_t)&devinit, FWRITE|FKIOCTL, credp, &lyr_rval)) != 0) { cmn_err(CE_WARN, "terminal emulator: Compatible fb not found"); return (tem_init_failed(tem, credp, B_FALSE)); } /* Make sure the fb driver and terminal emulator versions match */ if (devinit.version != VIS_CONS_REV) { cmn_err(CE_WARN, "terminal emulator: VIS_CONS_REV %d (see sys/visual_io.h) " "of console fb driver not supported", devinit.version); return (tem_init_failed(tem, credp, B_TRUE)); } if ((tem->fb_polledio = devinit.polledio) == NULL) { cmn_err(CE_WARN, "terminal emulator: fb doesn't support polled " "I/O"); return (tem_init_failed(tem, credp, B_TRUE)); } /* other sanity checks */ if (!((devinit.depth == 4) || (devinit.depth == 8) || (devinit.depth == 24) || (devinit.depth == 32))) { cmn_err(CE_WARN, "terminal emulator: unsupported depth"); return (tem_init_failed(tem, credp, B_TRUE)); } if ((devinit.mode != VIS_TEXT) && (devinit.mode != VIS_PIXEL)) { cmn_err(CE_WARN, "terminal emulator: unsupported mode"); return (tem_init_failed(tem, credp, B_TRUE)); } if ((devinit.mode == VIS_PIXEL) && plat_stdout_is_framebuffer()) { plat_tem_get_prom_size(&height, &width); } /* * Initialize the terminal emulator */ mutex_enter(&tem->lock); if ((err = tem_setup_terminal(&devinit, tem, height, width)) != 0) { cmn_err(CE_WARN, "terminal emulator: Init failed"); (void) ldi_ioctl(tem->hdl, VIS_DEVFINI, 0, FWRITE|FKIOCTL, credp, &lyr_rval); (void) ldi_close(tem->hdl, NULL, credp); mutex_exit(&tem->lock); tem_free(tem); return (err); } /* * On SPARC don't clear the screen if the console is the framebuffer. * Otherwise it needs to be cleared to get rid of junk that may be * in frameuffer memory, since the screen isn't cleared when * boot messages are directed elsewhere. */ if (devinit.mode == VIS_TEXT) { /* * The old getting current cursor position code, which * is not needed here, has been in tem_write/tem_polled_write. */ tem_reset_display(tem, credp, CALLED_FROM_NORMAL, 0); } else if (plat_stdout_is_framebuffer()) { ASSERT(devinit.mode == VIS_PIXEL); plat_tem_hide_prom_cursor(); tem_reset_display(tem, credp, CALLED_FROM_NORMAL, 0); /* * We are getting the current cursor position in pixel * mode so that we don't over-write the console output * during boot. */ plat_tem_get_prom_pos(&row, &col); /* * Adjust the row if necessary when the font of our * kernel console tem is different with that of prom * tem. */ row = tem_adjust_row(tem, row, credp); /* first line of our kernel console output */ tem->state->first_line = row + 1; /* re-set and align cusror position */ tem->state->a_c_cursor.row = row; tem->state->a_c_cursor.col = 0; tem_align_cursor(tem); } else { tem_reset_display(tem, credp, CALLED_FROM_NORMAL, 1); } #ifdef _HAVE_TEM_FIRMWARE if (plat_stdout_is_framebuffer()) { /* * Drivers in the console stream may emit additional * messages before we are ready. This causes text * overwrite on the screen. So we set the redirection * here. It is safe because the ioctl in consconfig_dacf * will succeed and consmode will be set to CONS_KFB. */ prom_set_stdout_redirect(console_prom_write_cb, (promif_redir_arg_t)tem); } #endif /* _HAVE_TEM_FIRMWARE */ mutex_exit(&tem->lock); *ptem = tem; /* Return tem to caller only upon success */ return (0); } /* * This is a callback function that we register with the frame * buffer driver layered underneath. It gets invoked from * the underlying frame buffer driver to reconfigure the terminal * emulator to a new screen size and depth in conjunction with * framebuffer videomode changes. */ void tem_modechange_callback(tem_t *tem, struct vis_devinit *devinit) { mutex_enter(&tem->lock); ASSERT(tem->hdl != NULL); (void) tem_setup_terminal(devinit, tem, tem->state->a_c_dimension.height, tem->state->a_c_dimension.width); tem_reset_display(tem, kcred, CALLED_FROM_NORMAL, 1); mutex_exit(&tem->lock); if (tem->modechg_cb != NULL) tem->modechg_cb(tem->modechg_arg); } static int tem_setup_terminal( struct vis_devinit *devinit, tem_t *tem, size_t height, size_t width) { int i; struct tem_state *new_state, *prev_state; ASSERT(MUTEX_HELD(&tem->lock)); prev_state = tem->state; new_state = kmem_zalloc(sizeof (struct tem_state), KM_SLEEP); new_state->a_pdepth = devinit->depth; new_state->display_mode = devinit->mode; new_state->linebytes = devinit->linebytes; switch (devinit->mode) { case VIS_TEXT: new_state->a_p_dimension.width = 0; new_state->a_p_dimension.height = 0; new_state->a_c_dimension.width = devinit->width; new_state->a_c_dimension.height = devinit->height; new_state->in_fp.f_display = tem_text_display; new_state->in_fp.f_copy = tem_text_copy; new_state->in_fp.f_cursor = tem_text_cursor; new_state->in_fp.f_cls = tem_text_cls; new_state->in_fp.f_bit2pix = NULL; new_state->a_blank_line = kmem_alloc(new_state->a_c_dimension.width, KM_SLEEP); for (i = 0; i < new_state->a_c_dimension.width; i++) new_state->a_blank_line[i] = ' '; break; case VIS_PIXEL: /* * First check to see if the user has specified a screen size. * If so, use those values. Else use 34x80 as the default. */ if (width == 0) { width = TEM_DEFAULT_COLS; height = TEM_DEFAULT_ROWS; } new_state->a_c_dimension.height = height; new_state->a_c_dimension.width = width; new_state->a_p_dimension.height = devinit->height; new_state->a_p_dimension.width = devinit->width; new_state->in_fp.f_display = tem_pix_display; new_state->in_fp.f_copy = tem_pix_copy; new_state->in_fp.f_cursor = tem_pix_cursor; new_state->in_fp.f_cls = tem_pix_cls; new_state->a_blank_line = NULL; /* * set_font() will select a appropriate sized font for * the number of rows and columns selected. If we don't * have a font that will fit, then it will use the * default builtin font and adjust the rows and columns * to fit on the screen. */ set_font(&new_state->a_font, &new_state->a_c_dimension.height, &new_state->a_c_dimension.width, new_state->a_p_dimension.height, new_state->a_p_dimension.width); new_state->a_p_offset.y = (new_state->a_p_dimension.height - (new_state->a_c_dimension.height * new_state->a_font.height)) / 2; new_state->a_p_offset.x = (new_state->a_p_dimension.width - (new_state->a_c_dimension.width * new_state->a_font.width)) / 2; switch (devinit->depth) { case 4: new_state->in_fp.f_bit2pix = bit_to_pix4; new_state->a_pix_data_size = (((new_state->a_font.width * 4) + NBBY - 1) / NBBY) * new_state->a_font.height; break; case 8: new_state->in_fp.f_bit2pix = bit_to_pix8; new_state->a_pix_data_size = new_state->a_font.width * new_state->a_font.height; break; case 24: case 32: new_state->in_fp.f_bit2pix = bit_to_pix24; new_state->a_pix_data_size = new_state->a_font.width * new_state->a_font.height; new_state->a_pix_data_size *= 4; break; } new_state->a_pix_data = kmem_alloc(new_state->a_pix_data_size, KM_SLEEP); break; default: /* * The layered fb driver conveyed an unrecognized rendering * mode. We cannot proceed with tem initialization. */ kmem_free(new_state, sizeof (struct tem_state)); return (ENXIO); } new_state->a_outbuf = kmem_alloc(new_state->a_c_dimension.width, KM_SLEEP); /* * Change state atomically so that polled I/O requests * can be safely and reliably serviced anytime after the terminal * emulator is originally initialized and the console mode has been * switched over from the PROM, even while a videomode change * callback is being processed. */ tem->state = new_state; if (prev_state != NULL) tem_free_state(prev_state); return (0); } /* * This function is used to display a rectangular blit of data * of a given size and location via the underlying framebuffer driver. * The blit can be as small as a pixel or as large as the screen. */ void tem_display_layered( tem_t *tem, struct vis_consdisplay *pda, cred_t *credp) { int rval; (void) ldi_ioctl(tem->hdl, VIS_CONSDISPLAY, (intptr_t)pda, FKIOCTL, credp, &rval); } /* * This function is used to invoke a block copy operation in the * underlying framebuffer driver. Rectangle copies are how scrolling * is implemented, as well as horizontal text shifting escape seqs. * such as from vi when deleting characters and words. */ void tem_copy_layered( tem_t *tem, struct vis_conscopy *pma, cred_t *credp) { int rval; (void) ldi_ioctl(tem->hdl, VIS_CONSCOPY, (intptr_t)pma, FKIOCTL, credp, &rval); } /* * This function is used to show or hide a rectangluar monochrom * pixel inverting, text block cursor via the underlying framebuffer. */ void tem_cursor_layered( tem_t *tem, struct vis_conscursor *pca, cred_t *credp) { int rval; (void) ldi_ioctl(tem->hdl, VIS_CONSCURSOR, (intptr_t)pca, FKIOCTL, credp, &rval); } void tem_reset_colormap( tem_t *tem, cred_t *credp, enum called_from called_from) { struct vis_cmap cm; int rval; if (called_from == CALLED_FROM_STANDALONE) return; switch (tem->state->a_pdepth) { case 8: cm.index = 0; cm.count = 16; cm.red = cmap4_to_24.red; /* 8-bits (1/3 of TrueColor 24) */ cm.blue = cmap4_to_24.blue; /* 8-bits (1/3 of TrueColor 24) */ cm.green = cmap4_to_24.green; /* 8-bits (1/3 of TrueColor 24) */ (void) ldi_ioctl(tem->hdl, VIS_PUTCMAP, (intptr_t)&cm, FKIOCTL, credp, &rval); break; } } void tem_get_size(tem_t *tem, ushort_t *r, ushort_t *c, ushort_t *x, ushort_t *y) { *r = (ushort_t)tem->state->a_c_dimension.height; *c = (ushort_t)tem->state->a_c_dimension.width; *x = (ushort_t)tem->state->a_p_dimension.width; *y = (ushort_t)tem->state->a_p_dimension.height; } void tem_register_modechg_cb(tem_t *tem, tem_modechg_cb_t func, tem_modechg_cb_arg_t arg) { tem->modechg_cb = func; tem->modechg_arg = arg; } /* * This function is to scroll up the OBP output, which has * different screen height and width with our kernel console. */ static void tem_prom_scroll_up(struct tem *tem, int nrows, cred_t *credp) { struct tem_state *tems = tem->state; struct vis_conscopy ma; int ncols, width; /* copy */ ma.s_row = nrows * tems->a_font.height; ma.e_row = tems->a_p_dimension.height - 1; ma.t_row = 0; ma.s_col = 0; ma.e_col = tems->a_p_dimension.width - 1; ma.t_col = 0; tem_copy(tem, &ma, credp, CALLED_FROM_NORMAL); /* clear */ width = tems->a_font.width; ncols = (tems->a_p_dimension.width + (width - 1))/ width; tem_pix_cls_range(tem, 0, nrows, tems->a_p_offset.y, 0, ncols, 0, B_TRUE, credp, CALLED_FROM_NORMAL); } #define PROM_DEFAULT_FONT_HEIGHT 22 #define PROM_DEFAULT_WINDOW_TOP 0x8a /* * This function is to compute the starting row of the console, according to * PROM cursor's position. Here we have to take different fonts into account. */ static int tem_adjust_row(tem_t *tem, int prom_row, cred_t *credp) { int tem_row; int tem_y; int prom_charheight = 0; int prom_window_top = 0; int scroll_up_lines; plat_tem_get_prom_font_size(&prom_charheight, &prom_window_top); if (prom_charheight == 0) prom_charheight = PROM_DEFAULT_FONT_HEIGHT; if (prom_window_top == 0) prom_window_top = PROM_DEFAULT_WINDOW_TOP; tem_y = (prom_row + 1) * prom_charheight + prom_window_top - tem->state->a_p_offset.y; tem_row = (tem_y + tem->state->a_font.height - 1) / tem->state->a_font.height - 1; if (tem_row < 0) { tem_row = 0; } else if (tem_row >= (tem->state->a_c_dimension.height - 1)) { /* * Scroll up the prom outputs if the PROM cursor's position is * below our tem's lower boundary. */ scroll_up_lines = tem_row - (tem->state->a_c_dimension.height - 1); tem_prom_scroll_up(tem, scroll_up_lines, credp); tem_row = tem->state->a_c_dimension.height - 1; } return (tem_row); }