/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2007 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" #include #include #include #include #include #define _SUN_TPI_VERSION 2 #include #include #include #include #include #include #include #include #include #include #include #include #include #include "sctp_impl.h" #include "sctp_asconf.h" #include "sctp_addr.h" /* * Returns 0 on success, EACCES on permission failure. */ static int sctp_select_port(sctp_t *sctp, in_port_t *requested_port, int *user_specified) { sctp_stack_t *sctps = sctp->sctp_sctps; /* * Get a valid port (within the anonymous range and should not * be a privileged one) to use if the user has not given a port. * If multiple threads are here, they may all start with * with the same initial port. But, it should be fine as long as * sctp_bindi will ensure that no two threads will be assigned * the same port. */ if (*requested_port == 0) { *requested_port = sctp_update_next_port( sctps->sctps_next_port_to_try, crgetzone(sctp->sctp_credp), sctps); if (*requested_port == 0) return (EACCES); *user_specified = 0; } else { int i; boolean_t priv = B_FALSE; /* * If the requested_port is in the well-known privileged range, * verify that the stream was opened by a privileged user. * Note: No locks are held when inspecting sctp_g_*epriv_ports * but instead the code relies on: * - the fact that the address of the array and its size never * changes * - the atomic assignment of the elements of the array */ if (*requested_port < sctps->sctps_smallest_nonpriv_port) { priv = B_TRUE; } else { for (i = 0; i < sctps->sctps_g_num_epriv_ports; i++) { if (*requested_port == sctps->sctps_g_epriv_ports[i]) { priv = B_TRUE; break; } } } if (priv) { /* * sctp_bind() should take a cred_t argument so that * we can use it here. */ if (secpolicy_net_privaddr(sctp->sctp_credp, *requested_port) != 0) { dprint(1, ("sctp_bind(x): no prive for port %d", *requested_port)); return (EACCES); } } *user_specified = 1; } return (0); } int sctp_listen(sctp_t *sctp) { sctp_tf_t *tf; sctp_stack_t *sctps = sctp->sctp_sctps; RUN_SCTP(sctp); /* * TCP handles listen() increasing the backlog, need to check * if it should be handled here too */ if (sctp->sctp_state > SCTPS_BOUND) { WAKE_SCTP(sctp); return (EINVAL); } /* Do an anonymous bind for unbound socket doing listen(). */ if (sctp->sctp_nsaddrs == 0) { struct sockaddr_storage ss; int ret; bzero(&ss, sizeof (ss)); ss.ss_family = sctp->sctp_family; WAKE_SCTP(sctp); if ((ret = sctp_bind(sctp, (struct sockaddr *)&ss, sizeof (ss))) != 0) return (ret); RUN_SCTP(sctp) } sctp->sctp_state = SCTPS_LISTEN; (void) random_get_pseudo_bytes(sctp->sctp_secret, SCTP_SECRET_LEN); sctp->sctp_last_secret_update = lbolt64; bzero(sctp->sctp_old_secret, SCTP_SECRET_LEN); tf = &sctps->sctps_listen_fanout[SCTP_LISTEN_HASH( ntohs(sctp->sctp_lport))]; sctp_listen_hash_insert(tf, sctp); WAKE_SCTP(sctp); return (0); } /* * Bind the sctp_t to a sockaddr, which includes an address and other * information, such as port or flowinfo. */ int sctp_bind(sctp_t *sctp, struct sockaddr *sa, socklen_t len) { int user_specified; boolean_t bind_to_req_port_only; in_port_t requested_port; in_port_t allocated_port; int err = 0; ASSERT(sctp != NULL); ASSERT(sa); RUN_SCTP(sctp); if (sctp->sctp_state > SCTPS_BOUND) { err = EINVAL; goto done; } switch (sa->sa_family) { case AF_INET: if (len < sizeof (struct sockaddr_in) || sctp->sctp_family == AF_INET6) { err = EINVAL; goto done; } requested_port = ntohs(((struct sockaddr_in *)sa)->sin_port); break; case AF_INET6: if (len < sizeof (struct sockaddr_in6) || sctp->sctp_family == AF_INET) { err = EINVAL; goto done; } requested_port = ntohs(((struct sockaddr_in6 *)sa)->sin6_port); /* Set the flowinfo. */ sctp->sctp_ip6h->ip6_vcf = (IPV6_DEFAULT_VERS_AND_FLOW & IPV6_VERS_AND_FLOW_MASK) | (((struct sockaddr_in6 *)sa)->sin6_flowinfo & ~IPV6_VERS_AND_FLOW_MASK); break; default: err = EAFNOSUPPORT; goto done; } bind_to_req_port_only = requested_port == 0 ? B_FALSE : B_TRUE; err = sctp_select_port(sctp, &requested_port, &user_specified); if (err != 0) goto done; if ((err = sctp_bind_add(sctp, sa, 1, B_TRUE, user_specified == 1 ? htons(requested_port) : 0)) != 0) { goto done; } err = sctp_bindi(sctp, requested_port, bind_to_req_port_only, user_specified, &allocated_port); if (err != 0) { sctp_free_saddrs(sctp); } else { ASSERT(sctp->sctp_state == SCTPS_BOUND); } done: WAKE_SCTP(sctp); return (err); } /* * Perform bind/unbind operation of a list of addresses on a sctp_t */ int sctp_bindx(sctp_t *sctp, const void *addrs, int addrcnt, int bindop) { ASSERT(sctp != NULL); ASSERT(addrs != NULL); ASSERT(addrcnt > 0); switch (bindop) { case SCTP_BINDX_ADD_ADDR: return (sctp_bind_add(sctp, addrs, addrcnt, B_FALSE, sctp->sctp_lport)); case SCTP_BINDX_REM_ADDR: return (sctp_bind_del(sctp, addrs, addrcnt, B_FALSE)); default: return (EINVAL); } } /* * Add a list of addresses to a sctp_t. */ int sctp_bind_add(sctp_t *sctp, const void *addrs, uint32_t addrcnt, boolean_t caller_hold_lock, in_port_t port) { int err = 0; boolean_t do_asconf = B_FALSE; sctp_stack_t *sctps = sctp->sctp_sctps; if (!caller_hold_lock) RUN_SCTP(sctp); if (sctp->sctp_state > SCTPS_ESTABLISHED) { if (!caller_hold_lock) WAKE_SCTP(sctp); return (EINVAL); } if (sctp->sctp_state > SCTPS_LISTEN) { /* * Let's do some checking here rather than undoing the * add later (for these reasons). */ if (!sctps->sctps_addip_enabled || !sctp->sctp_understands_asconf || !sctp->sctp_understands_addip) { if (!caller_hold_lock) WAKE_SCTP(sctp); return (EINVAL); } do_asconf = B_TRUE; } /* * On a clustered node, for an inaddr_any bind, we will pass the list * of all the addresses in the global list, minus any address on the * loopback interface, and expect the clustering susbsystem to give us * the correct list for the 'port'. For explicit binds we give the * list of addresses and the clustering module validates it for the * 'port'. * * On a non-clustered node, cl_sctp_check_addrs will be NULL and * we proceed as usual. */ if (cl_sctp_check_addrs != NULL) { uchar_t *addrlist = NULL; size_t size = 0; int unspec = 0; boolean_t do_listen; uchar_t *llist = NULL; size_t lsize = 0; /* * If we are adding addresses after listening, but before * an association is established, we need to update the * clustering module with this info. */ do_listen = !do_asconf && sctp->sctp_state > SCTPS_BOUND && cl_sctp_listen != NULL; err = sctp_get_addrlist(sctp, addrs, &addrcnt, &addrlist, &unspec, &size); if (err != 0) { ASSERT(addrlist == NULL); ASSERT(addrcnt == 0); ASSERT(size == 0); if (!caller_hold_lock) WAKE_SCTP(sctp); SCTP_KSTAT(sctps, sctp_cl_check_addrs); return (err); } ASSERT(addrlist != NULL); (*cl_sctp_check_addrs)(sctp->sctp_family, port, &addrlist, size, &addrcnt, unspec == 1); if (addrcnt == 0) { /* We free the list */ kmem_free(addrlist, size); if (!caller_hold_lock) WAKE_SCTP(sctp); return (EINVAL); } if (do_listen) { lsize = sizeof (in6_addr_t) * addrcnt; llist = kmem_alloc(lsize, KM_SLEEP); } err = sctp_valid_addr_list(sctp, addrlist, addrcnt, llist, lsize); if (err == 0 && do_listen) { (*cl_sctp_listen)(sctp->sctp_family, llist, addrcnt, sctp->sctp_lport); /* list will be freed by the clustering module */ } else if (err != 0 && llist != NULL) { kmem_free(llist, lsize); } /* free the list we allocated */ kmem_free(addrlist, size); } else { err = sctp_valid_addr_list(sctp, addrs, addrcnt, NULL, 0); } if (err != 0) { if (!caller_hold_lock) WAKE_SCTP(sctp); return (err); } /* Need to send ASCONF messages */ if (do_asconf) { err = sctp_add_ip(sctp, addrs, addrcnt); if (err != 0) { sctp_del_saddr_list(sctp, addrs, addrcnt, B_FALSE); if (!caller_hold_lock) WAKE_SCTP(sctp); return (err); } } if (!caller_hold_lock) WAKE_SCTP(sctp); if (do_asconf) sctp_process_sendq(sctp); return (0); } /* * Remove one or more addresses bound to the sctp_t. */ int sctp_bind_del(sctp_t *sctp, const void *addrs, uint32_t addrcnt, boolean_t caller_hold_lock) { int error = 0; boolean_t do_asconf = B_FALSE; uchar_t *ulist = NULL; size_t usize = 0; sctp_stack_t *sctps = sctp->sctp_sctps; if (!caller_hold_lock) RUN_SCTP(sctp); if (sctp->sctp_state > SCTPS_ESTABLISHED) { if (!caller_hold_lock) WAKE_SCTP(sctp); return (EINVAL); } /* * Fail the remove if we are beyond listen, but can't send this * to the peer. */ if (sctp->sctp_state > SCTPS_LISTEN) { if (!sctps->sctps_addip_enabled || !sctp->sctp_understands_asconf || !sctp->sctp_understands_addip) { if (!caller_hold_lock) WAKE_SCTP(sctp); return (EINVAL); } do_asconf = B_TRUE; } /* Can't delete the last address nor all of the addresses */ if (sctp->sctp_nsaddrs == 1 || addrcnt >= sctp->sctp_nsaddrs) { if (!caller_hold_lock) WAKE_SCTP(sctp); return (EINVAL); } if (cl_sctp_unlisten != NULL && !do_asconf && sctp->sctp_state > SCTPS_BOUND) { usize = sizeof (in6_addr_t) * addrcnt; ulist = kmem_alloc(usize, KM_SLEEP); } error = sctp_del_ip(sctp, addrs, addrcnt, ulist, usize); if (error != 0) { if (ulist != NULL) kmem_free(ulist, usize); if (!caller_hold_lock) WAKE_SCTP(sctp); return (error); } /* ulist will be non-NULL only if cl_sctp_unlisten is non-NULL */ if (ulist != NULL) { ASSERT(cl_sctp_unlisten != NULL); (*cl_sctp_unlisten)(sctp->sctp_family, ulist, addrcnt, sctp->sctp_lport); /* ulist will be freed by the clustering module */ } if (!caller_hold_lock) WAKE_SCTP(sctp); if (do_asconf) sctp_process_sendq(sctp); return (error); } /* * Returns 0 for success, errno value otherwise. * * If the "bind_to_req_port_only" parameter is set and the requested port * number is available, then set allocated_port to it. If not available, * return an error. * * If the "bind_to_req_port_only" parameter is not set and the requested port * number is available, then set allocated_port to it. If not available, * find the first anonymous port we can and set allocated_port to that. If no * anonymous ports are available, return an error. * * In either case, when succeeding, update the sctp_t to record the port number * and insert it in the bind hash table. */ int sctp_bindi(sctp_t *sctp, in_port_t port, boolean_t bind_to_req_port_only, int user_specified, in_port_t *allocated_port) { /* number of times we have run around the loop */ int count = 0; /* maximum number of times to run around the loop */ int loopmax; zoneid_t zoneid = sctp->sctp_zoneid; zone_t *zone = crgetzone(sctp->sctp_credp); sctp_stack_t *sctps = sctp->sctp_sctps; /* * Lookup for free addresses is done in a loop and "loopmax" * influences how long we spin in the loop */ if (bind_to_req_port_only) { /* * If the requested port is busy, don't bother to look * for a new one. Setting loop maximum count to 1 has * that effect. */ loopmax = 1; } else { /* * If the requested port is busy, look for a free one * in the anonymous port range. * Set loopmax appropriately so that one does not look * forever in the case all of the anonymous ports are in use. */ loopmax = (sctps->sctps_largest_anon_port - sctps->sctps_smallest_anon_port + 1); } do { uint16_t lport; sctp_tf_t *tbf; sctp_t *lsctp; int addrcmp; lport = htons(port); /* * Ensure that the sctp_t is not currently in the bind hash. * Hold the lock on the hash bucket to ensure that * the duplicate check plus the insertion is an atomic * operation. * * This function does an inline lookup on the bind hash list * Make sure that we access only members of sctp_t * and that we don't look at sctp_sctp, since we are not * doing a SCTPB_REFHOLD. For more details please see the notes * in sctp_compress() */ sctp_bind_hash_remove(sctp); tbf = &sctps->sctps_bind_fanout[SCTP_BIND_HASH(port)]; mutex_enter(&tbf->tf_lock); for (lsctp = tbf->tf_sctp; lsctp != NULL; lsctp = lsctp->sctp_bind_hash) { if (lport != lsctp->sctp_lport || lsctp->sctp_state < SCTPS_BOUND) continue; /* * On a labeled system, we must treat bindings to ports * on shared IP addresses by sockets with MAC exemption * privilege as being in all zones, as there's * otherwise no way to identify the right receiver. */ if (lsctp->sctp_zoneid != zoneid && !lsctp->sctp_mac_exempt && !sctp->sctp_mac_exempt) continue; addrcmp = sctp_compare_saddrs(sctp, lsctp); if (addrcmp != SCTP_ADDR_DISJOINT) { if (!sctp->sctp_reuseaddr) { /* in use */ break; } else if (lsctp->sctp_state == SCTPS_BOUND || lsctp->sctp_state == SCTPS_LISTEN) { /* * socket option SO_REUSEADDR is set * on the binding sctp_t. * * We have found a match of IP source * address and source port, which is * refused regardless of the * SO_REUSEADDR setting, so we break. */ break; } } } if (lsctp != NULL) { /* The port number is busy */ mutex_exit(&tbf->tf_lock); } else { conn_t *connp = sctp->sctp_connp; if (is_system_labeled()) { mlp_type_t addrtype, mlptype; /* * On a labeled system we must check the type * of the binding requested by the user (either * MLP or SLP on shared and private addresses), * and that the user's requested binding * is permitted. */ addrtype = tsol_mlp_addr_type(zone->zone_id, sctp->sctp_ipversion, sctp->sctp_ipversion == IPV4_VERSION ? (void *)&sctp->sctp_ipha->ipha_src : (void *)&sctp->sctp_ip6h->ip6_src, sctps->sctps_netstack->netstack_ip); /* * tsol_mlp_addr_type returns the possibilities * for the selected address. Since all local * addresses are either private or shared, the * return value mlptSingle means "local address * not valid (interface not present)." */ if (addrtype == mlptSingle) { mutex_exit(&tbf->tf_lock); return (EADDRNOTAVAIL); } mlptype = tsol_mlp_port_type(zone, IPPROTO_SCTP, port, addrtype); if (mlptype != mlptSingle) { if (secpolicy_net_bindmlp(connp-> conn_cred) != 0) { mutex_exit(&tbf->tf_lock); return (EACCES); } /* * If we're binding a shared MLP, then * make sure that this zone is the one * that owns that MLP. Shared MLPs can * be owned by at most one zone. * * No need to handle exclusive-stack * zones since ALL_ZONES only applies * to the shared stack. */ if (mlptype == mlptShared && addrtype == mlptShared && connp->conn_zoneid != tsol_mlp_findzone(IPPROTO_SCTP, lport)) { mutex_exit(&tbf->tf_lock); return (EACCES); } connp->conn_mlp_type = mlptype; } } /* * This port is ours. Insert in fanout and mark as * bound to prevent others from getting the port * number. */ sctp->sctp_state = SCTPS_BOUND; sctp->sctp_lport = lport; sctp->sctp_sctph->sh_sport = lport; ASSERT(&sctps->sctps_bind_fanout[ SCTP_BIND_HASH(port)] == tbf); sctp_bind_hash_insert(tbf, sctp, 1); mutex_exit(&tbf->tf_lock); /* * We don't want sctp_next_port_to_try to "inherit" * a port number supplied by the user in a bind. * * This is the only place where sctp_next_port_to_try * is updated. After the update, it may or may not * be in the valid range. */ if (user_specified == 0) sctps->sctps_next_port_to_try = port + 1; *allocated_port = port; return (0); } if ((count == 0) && (user_specified)) { /* * We may have to return an anonymous port. So * get one to start with. */ port = sctp_update_next_port( sctps->sctps_next_port_to_try, zone, sctps); user_specified = 0; } else { port = sctp_update_next_port(port + 1, zone, sctps); } if (port == 0) break; /* * Don't let this loop run forever in the case where * all of the anonymous ports are in use. */ } while (++count < loopmax); return (bind_to_req_port_only ? EADDRINUSE : EADDRNOTAVAIL); } /* * Don't let port fall into the privileged range. * Since the extra privileged ports can be arbitrary we also * ensure that we exclude those from consideration. * sctp_g_epriv_ports is not sorted thus we loop over it until * there are no changes. * * Note: No locks are held when inspecting sctp_g_*epriv_ports * but instead the code relies on: * - the fact that the address of the array and its size never changes * - the atomic assignment of the elements of the array */ in_port_t sctp_update_next_port(in_port_t port, zone_t *zone, sctp_stack_t *sctps) { int i; boolean_t restart = B_FALSE; retry: if (port < sctps->sctps_smallest_anon_port) port = sctps->sctps_smallest_anon_port; if (port > sctps->sctps_largest_anon_port) { if (restart) return (0); restart = B_TRUE; port = sctps->sctps_smallest_anon_port; } if (port < sctps->sctps_smallest_nonpriv_port) port = sctps->sctps_smallest_nonpriv_port; for (i = 0; i < sctps->sctps_g_num_epriv_ports; i++) { if (port == sctps->sctps_g_epriv_ports[i]) { port++; /* * Make sure whether the port is in the * valid range. * * XXX Note that if sctp_g_epriv_ports contains * all the anonymous ports this will be an * infinite loop. */ goto retry; } } if (is_system_labeled() && (i = tsol_next_port(zone, port, IPPROTO_SCTP, B_TRUE)) != 0) { port = i; goto retry; } return (port); }