/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2009 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * DTrace CPU Performance Counter Provider * --------------------------------------- * * The DTrace cpc provider allows DTrace consumers to access the CPU * performance counter overflow mechanism of a CPU. The configuration * presented in a probe specification is programmed into the performance * counter hardware of all available CPUs on a system. Programming the * hardware causes a counter on each CPU to begin counting events of the * given type. When the specified number of events have occurred, an overflow * interrupt will be generated and the probe is fired. * * The required configuration for the performance counter is encoded into * the probe specification and this includes the performance counter event * name, processor mode, overflow rate and an optional unit mask. * * Most processors provide several counters (PICs) which can count all or a * subset of the events available for a given CPU. However, when overflow * profiling is being used, not all CPUs can detect which counter generated the * overflow interrupt. In this case we cannot reliably determine which counter * overflowed and we therefore only allow such CPUs to configure one event at * a time. Processors that can determine the counter which overflowed are * allowed to program as many events at one time as possible (in theory up to * the number of instrumentation counters supported by that platform). * Therefore, multiple consumers can enable multiple probes at the same time * on such platforms. Platforms which cannot determine the source of an * overflow interrupt are only allowed to program a single event at one time. * * The performance counter hardware is made available to consumers on a * first-come, first-served basis. Only a finite amount of hardware resource * is available and, while we make every attempt to accomodate requests from * consumers, we must deny requests when hardware resources have been exhausted. * A consumer will fail to enable probes when resources are currently in use. * * The cpc provider contends for shared hardware resources along with other * consumers of the kernel CPU performance counter subsystem (e.g. cpustat(1M)). * Only one such consumer can use the performance counters at any one time and * counters are made available on a first-come, first-served basis. As with * cpustat, the cpc provider has priority over per-LWP libcpc usage (e.g. * cputrack(1)). Invoking the cpc provider will cause all existing per-LWP * counter contexts to be invalidated. */ typedef struct dcpc_probe { char dcpc_event_name[CPC_MAX_EVENT_LEN]; int dcpc_flag; /* flags (USER/SYS) */ uint32_t dcpc_ovfval; /* overflow value */ int64_t dcpc_umask; /* umask/emask for this event */ int dcpc_picno; /* pic this event is programmed in */ int dcpc_enabled; /* probe is actually enabled? */ int dcpc_disabling; /* probe is currently being disabled */ dtrace_id_t dcpc_id; /* probeid this request is enabling */ int dcpc_actv_req_idx; /* idx into dcpc_actv_reqs[] */ } dcpc_probe_t; static dev_info_t *dcpc_devi; static dtrace_provider_id_t dcpc_pid; static dcpc_probe_t **dcpc_actv_reqs; static uint32_t dcpc_enablings = 0; static int dcpc_ovf_mask = 0; static int dcpc_mult_ovf_cap = 0; static int dcpc_mask_type = 0; /* * When the dcpc provider is loaded, dcpc_min_overflow is set to either * DCPC_MIN_OVF_DEFAULT or the value that dcpc-min-overflow is set to in * the dcpc.conf file. Decrease this value to set probes with smaller * overflow values. Remember that very small values could render a system * unusable with frequently occurring events. */ #define DCPC_MIN_OVF_DEFAULT 5000 static uint32_t dcpc_min_overflow; static int dcpc_aframes = 0; /* override for artificial frame setting */ #if defined(__x86) #define DCPC_ARTIFICIAL_FRAMES 8 #elif defined(__sparc) #define DCPC_ARTIFICIAL_FRAMES 2 #endif /* * Called from the platform overflow interrupt handler. 'bitmap' is a mask * which contains the pic(s) that have overflowed. */ static void dcpc_fire(uint64_t bitmap) { int i; /* * No counter was marked as overflowing. Shout about it and get out. */ if ((bitmap & dcpc_ovf_mask) == 0) { cmn_err(CE_NOTE, "dcpc_fire: no counter overflow found\n"); return; } /* * This is the common case of a processor that doesn't support * multiple overflow events. Such systems are only allowed a single * enabling and therefore we just look for the first entry in * the active request array. */ if (!dcpc_mult_ovf_cap) { for (i = 0; i < cpc_ncounters; i++) { if (dcpc_actv_reqs[i] != NULL) { dtrace_probe(dcpc_actv_reqs[i]->dcpc_id, CPU->cpu_cpcprofile_pc, CPU->cpu_cpcprofile_upc, 0, 0, 0); return; } } return; } /* * This is a processor capable of handling multiple overflow events. * Iterate over the array of active requests and locate the counters * that overflowed (note: it is possible for more than one counter to * have overflowed at the same time). */ for (i = 0; i < cpc_ncounters; i++) { if (dcpc_actv_reqs[i] != NULL && (bitmap & (1ULL << dcpc_actv_reqs[i]->dcpc_picno))) { dtrace_probe(dcpc_actv_reqs[i]->dcpc_id, CPU->cpu_cpcprofile_pc, CPU->cpu_cpcprofile_upc, 0, 0, 0); } } } static void dcpc_create_probe(dtrace_provider_id_t id, const char *probename, char *eventname, int64_t umask, uint32_t ovfval, char flag) { dcpc_probe_t *pp; int nr_frames = DCPC_ARTIFICIAL_FRAMES + dtrace_mach_aframes(); if (dcpc_aframes) nr_frames = dcpc_aframes; if (dtrace_probe_lookup(id, NULL, NULL, probename) != 0) return; pp = kmem_zalloc(sizeof (dcpc_probe_t), KM_SLEEP); (void) strncpy(pp->dcpc_event_name, eventname, sizeof (pp->dcpc_event_name) - 1); pp->dcpc_event_name[sizeof (pp->dcpc_event_name) - 1] = '\0'; pp->dcpc_flag = flag | CPC_OVF_NOTIFY_EMT; pp->dcpc_ovfval = ovfval; pp->dcpc_umask = umask; pp->dcpc_actv_req_idx = pp->dcpc_picno = pp->dcpc_disabling = -1; pp->dcpc_id = dtrace_probe_create(id, NULL, NULL, probename, nr_frames, pp); } /*ARGSUSED*/ static void dcpc_provide(void *arg, const dtrace_probedesc_t *desc) { /* * The format of a probe is: * * event_name-mode-{optional_umask}-overflow_rate * e.g. * DC_refill_from_system-user-0x1e-50000, or, * DC_refill_from_system-all-10000 * */ char *str, *end, *p; int i, flag = 0; char event[CPC_MAX_EVENT_LEN]; long umask = -1, val = 0; size_t evlen, len; /* * The 'cpc' provider offers no probes by default. */ if (desc == NULL) return; len = strlen(desc->dtpd_name); p = str = kmem_alloc(len + 1, KM_SLEEP); (void) strcpy(str, desc->dtpd_name); /* * We have a poor man's strtok() going on here. Replace any hyphens * in the the probe name with NULL characters in order to make it * easy to parse the string with regular string functions. */ for (i = 0; i < len; i++) { if (str[i] == '-') str[i] = '\0'; } /* * The first part of the string must be either a platform event * name or a generic event name. */ evlen = strlen(p); (void) strncpy(event, p, CPC_MAX_EVENT_LEN - 1); event[CPC_MAX_EVENT_LEN - 1] = '\0'; /* * The next part of the name is the mode specification. Valid * settings are "user", "kernel" or "all". */ p += evlen + 1; if (strcmp(p, "user") == 0) flag |= CPC_COUNT_USER; else if (strcmp(p, "kernel") == 0) flag |= CPC_COUNT_SYSTEM; else if (strcmp(p, "all") == 0) flag |= CPC_COUNT_USER | CPC_COUNT_SYSTEM; else goto err; /* * Next we either have a mask specification followed by an overflow * rate or just an overflow rate on its own. */ p += strlen(p) + 1; if (p[0] == '0' && (p[1] == 'x' || p[1] == 'X')) { /* * A unit mask can only be specified if: * 1) this performance counter back end supports masks. * 2) the specified event is platform specific. * 3) a valid hex number is converted. * 4) no extraneous characters follow the mask specification. */ if (dcpc_mask_type != 0 && strncmp(event, "PAPI", 4) != 0 && ddi_strtol(p, &end, 16, &umask) == 0 && end == p + strlen(p)) { p += strlen(p) + 1; } else { goto err; } } /* * This final part must be an overflow value which has to be greater * than the minimum permissible overflow rate. */ if ((ddi_strtol(p, &end, 10, &val) != 0) || end != p + strlen(p) || val < dcpc_min_overflow) goto err; /* * Validate the event and create the probe. */ for (i = 0; i < cpc_ncounters; i++) { if (strstr(kcpc_list_events(i), event) != NULL) dcpc_create_probe(dcpc_pid, desc->dtpd_name, event, umask, (uint32_t)val, flag); } err: kmem_free(str, len + 1); } /*ARGSUSED*/ static void dcpc_destroy(void *arg, dtrace_id_t id, void *parg) { dcpc_probe_t *pp = parg; ASSERT(pp->dcpc_enabled == 0); kmem_free(pp, sizeof (dcpc_probe_t)); } /*ARGSUSED*/ static int dcpc_usermode(void *arg, dtrace_id_t id, void *parg) { return (CPU->cpu_cpcprofile_pc == 0); } static void dcpc_populate_set(cpu_t *c, dcpc_probe_t *pp, kcpc_set_t *set, int reqno) { kcpc_set_t *oset; int i; (void) strncpy(set->ks_req[reqno].kr_event, pp->dcpc_event_name, CPC_MAX_EVENT_LEN); set->ks_req[reqno].kr_config = NULL; set->ks_req[reqno].kr_index = reqno; set->ks_req[reqno].kr_picnum = -1; set->ks_req[reqno].kr_flags = pp->dcpc_flag; /* * If a unit mask has been specified then detect which attribute * the platform needs. For now, it's either "umask" or "emask". */ if (pp->dcpc_umask >= 0) { set->ks_req[reqno].kr_attr = kmem_zalloc(sizeof (kcpc_attr_t), KM_SLEEP); set->ks_req[reqno].kr_nattrs = 1; if (dcpc_mask_type & DCPC_UMASK) (void) strncpy(set->ks_req[reqno].kr_attr->ka_name, "umask", 5); else (void) strncpy(set->ks_req[reqno].kr_attr->ka_name, "emask", 5); set->ks_req[reqno].kr_attr->ka_val = pp->dcpc_umask; } else { set->ks_req[reqno].kr_attr = NULL; set->ks_req[reqno].kr_nattrs = 0; } /* * If this probe is enabled, obtain its current countdown value * and use that. The CPUs cpc context might not exist yet if we * are dealing with a CPU that is just coming online. */ if (pp->dcpc_enabled && (c->cpu_cpc_ctx != NULL)) { oset = c->cpu_cpc_ctx->kc_set; for (i = 0; i < oset->ks_nreqs; i++) { if (strcmp(oset->ks_req[i].kr_event, set->ks_req[reqno].kr_event) == 0) { set->ks_req[reqno].kr_preset = *(oset->ks_req[i].kr_data); } } } else { set->ks_req[reqno].kr_preset = UINT64_MAX - pp->dcpc_ovfval; } set->ks_nreqs++; } /* * Create a fresh request set for the enablings represented in the * 'dcpc_actv_reqs' array which contains the probes we want to be * in the set. This can be called for several reasons: * * 1) We are on a single or multi overflow platform and we have no * current events so we can just create the set and initialize it. * 2) We are on a multi-overflow platform and we already have one or * more existing events and we are adding a new enabling. Create a * new set and copy old requests in and then add the new request. * 3) We are on a multi-overflow platform and we have just removed an * enabling but we still have enablings whch are valid. Create a new * set and copy in still valid requests. */ static kcpc_set_t * dcpc_create_set(cpu_t *c) { int i, reqno = 0; int active_requests = 0; kcpc_set_t *set; /* * First get a count of the number of currently active requests. * Note that dcpc_actv_reqs[] should always reflect which requests * we want to be in the set that is to be created. It is the * responsibility of the caller of dcpc_create_set() to adjust that * array accordingly beforehand. */ for (i = 0; i < cpc_ncounters; i++) { if (dcpc_actv_reqs[i] != NULL) active_requests++; } set = kmem_zalloc(sizeof (kcpc_set_t), KM_SLEEP); set->ks_req = kmem_zalloc(sizeof (kcpc_request_t) * active_requests, KM_SLEEP); set->ks_data = kmem_zalloc(active_requests * sizeof (uint64_t), KM_SLEEP); /* * Look for valid entries in the active requests array and populate * the request set for any entries found. */ for (i = 0; i < cpc_ncounters; i++) { if (dcpc_actv_reqs[i] != NULL) { dcpc_populate_set(c, dcpc_actv_reqs[i], set, reqno); reqno++; } } return (set); } static int dcpc_program_cpu_event(cpu_t *c) { int i, j, subcode; kcpc_ctx_t *ctx, *octx; kcpc_set_t *set; set = dcpc_create_set(c); octx = NULL; set->ks_ctx = ctx = kcpc_ctx_alloc(); ctx->kc_set = set; ctx->kc_cpuid = c->cpu_id; if (kcpc_assign_reqs(set, ctx) != 0) goto err; if (kcpc_configure_reqs(ctx, set, &subcode) != 0) goto err; for (i = 0; i < set->ks_nreqs; i++) { for (j = 0; j < cpc_ncounters; j++) { if (dcpc_actv_reqs[j] != NULL && strcmp(set->ks_req[i].kr_event, dcpc_actv_reqs[j]->dcpc_event_name) == 0) { dcpc_actv_reqs[j]->dcpc_picno = set->ks_req[i].kr_picnum; } } } /* * If we already have an active enabling then save the current cpc * context away. */ if (c->cpu_cpc_ctx != NULL) octx = c->cpu_cpc_ctx; c->cpu_cpc_ctx = ctx; kcpc_remote_program(c); if (octx != NULL) { kcpc_set_t *oset = octx->kc_set; kmem_free(oset->ks_data, oset->ks_nreqs * sizeof (uint64_t)); kcpc_free_set(oset); kcpc_ctx_free(octx); } return (0); err: /* * We failed to configure this request up so free things up and * get out. */ kmem_free(set->ks_data, set->ks_nreqs * sizeof (uint64_t)); kcpc_free_set(set); kcpc_ctx_free(ctx); return (-1); } static void dcpc_disable_cpu(cpu_t *c) { kcpc_ctx_t *ctx; kcpc_set_t *set; /* * Leave this CPU alone if it's already offline. */ if (c->cpu_flags & CPU_OFFLINE) return; kcpc_remote_stop(c); ctx = c->cpu_cpc_ctx; set = ctx->kc_set; kcpc_free_configs(set); kmem_free(set->ks_data, set->ks_nreqs * sizeof (uint64_t)); kcpc_free_set(set); kcpc_ctx_free(ctx); c->cpu_cpc_ctx = NULL; } /* * Stop overflow interrupts being actively processed so that per-CPU * configuration state can be changed safely and correctly. Each CPU has a * dcpc interrupt state byte which is transitioned from DCPC_INTR_FREE (the * "free" state) to DCPC_INTR_CONFIG (the "configuration in process" state) * before any configuration state is changed on any CPUs. The hardware overflow * handler, kcpc_hw_overflow_intr(), will only process an interrupt when a * configuration is not in process (i.e. the state is marked as free). During * interrupt processing the state is set to DCPC_INTR_PROCESSING by the * overflow handler. */ static void dcpc_block_interrupts(void) { cpu_t *c; uint8_t *state; c = cpu_list; do { state = &cpu_core[c->cpu_id].cpuc_dcpc_intr_state; while (atomic_cas_8(state, DCPC_INTR_FREE, DCPC_INTR_CONFIG) != DCPC_INTR_FREE) continue; } while ((c = c->cpu_next) != cpu_list); } /* * Set all CPUs dcpc interrupt state to DCPC_INTR_FREE to indicate that * overflow interrupts can be processed safely. */ static void dcpc_release_interrupts(void) { cpu_t *c = cpu_list; do { cpu_core[c->cpu_id].cpuc_dcpc_intr_state = DCPC_INTR_FREE; membar_producer(); } while ((c = c->cpu_next) != cpu_list); } /* * dcpc_program_event() can be called owing to a new enabling or if a multi * overflow platform has disabled a request but needs to program the requests * that are still valid. * * Every invocation of dcpc_program_event() will create a new kcpc_ctx_t * and a new request set which contains the new enabling and any old enablings * which are still valid (possible with multi-overflow platforms). */ static int dcpc_program_event(dcpc_probe_t *pp) { cpu_t *c; int ret = 0; ASSERT(MUTEX_HELD(&cpu_lock)); kpreempt_disable(); dcpc_block_interrupts(); c = cpu_list; do { /* * Skip CPUs that are currently offline. */ if (c->cpu_flags & CPU_OFFLINE) continue; if (c->cpu_cpc_ctx != NULL) kcpc_remote_stop(c); } while ((c = c->cpu_next) != cpu_list); dcpc_release_interrupts(); /* * If this enabling is being removed (in the case of a multi event * capable system with more than one active enabling), we can now * update the active request array to reflect the enablings that need * to be reprogrammed. */ if (pp->dcpc_disabling == 1) dcpc_actv_reqs[pp->dcpc_actv_req_idx] = NULL; do { /* * Skip CPUs that are currently offline. */ if (c->cpu_flags & CPU_OFFLINE) continue; ret = dcpc_program_cpu_event(c); } while ((c = c->cpu_next) != cpu_list && ret == 0); /* * If dcpc_program_cpu_event() fails then it is because we couldn't * configure the requests in the set for the CPU and not because of * an error programming the hardware. If we have a failure here then * we assume no CPUs have been programmed in the above step as they * are all configured identically. */ if (ret != 0) { pp->dcpc_enabled = 0; kpreempt_enable(); return (-1); } if (pp->dcpc_disabling != 1) pp->dcpc_enabled = 1; kpreempt_enable(); return (0); } /*ARGSUSED*/ static int dcpc_enable(void *arg, dtrace_id_t id, void *parg) { dcpc_probe_t *pp = parg; int i, found = 0; cpu_t *c; ASSERT(MUTEX_HELD(&cpu_lock)); /* * Bail out if the counters are being used by a libcpc consumer. */ rw_enter(&kcpc_cpuctx_lock, RW_READER); if (kcpc_cpuctx > 0) { rw_exit(&kcpc_cpuctx_lock); return (-1); } dtrace_cpc_in_use++; rw_exit(&kcpc_cpuctx_lock); /* * Locate this enabling in the first free entry of the active * request array. */ for (i = 0; i < cpc_ncounters; i++) { if (dcpc_actv_reqs[i] == NULL) { dcpc_actv_reqs[i] = pp; pp->dcpc_actv_req_idx = i; found = 1; break; } } /* * If we couldn't find a slot for this probe then there is no * room at the inn. */ if (!found) { dtrace_cpc_in_use--; return (-1); } ASSERT(pp->dcpc_actv_req_idx >= 0); /* * The following must hold true if we are to (attempt to) enable * this request: * * 1) No enablings currently exist. We allow all platforms to * proceed if this is true. * * OR * * 2) If the platform is multi overflow capable and there are * less valid enablings than there are counters. There is no * guarantee that a platform can accommodate as many events as * it has counters for but we will at least try to program * up to that many requests. * * The 'dcpc_enablings' variable is implictly protected by locking * provided by the DTrace framework and the cpu management framework. */ if (dcpc_enablings == 0 || (dcpc_mult_ovf_cap && dcpc_enablings < cpc_ncounters)) { /* * Before attempting to program the first enabling we need to * invalidate any lwp-based contexts. */ if (dcpc_enablings == 0) kcpc_invalidate_all(); if (dcpc_program_event(pp) == 0) { dcpc_enablings++; return (0); } } /* * If active enablings existed before we failed to enable this probe * on a multi event capable platform then we need to restart counters * as they will have been stopped in the attempted configuration. The * context should now just contain the request prior to this failed * enabling. */ if (dcpc_enablings > 0 && dcpc_mult_ovf_cap) { c = cpu_list; ASSERT(dcpc_mult_ovf_cap == 1); do { /* * Skip CPUs that are currently offline. */ if (c->cpu_flags & CPU_OFFLINE) continue; kcpc_remote_program(c); } while ((c = c->cpu_next) != cpu_list); } dtrace_cpc_in_use--; dcpc_actv_reqs[pp->dcpc_actv_req_idx] = NULL; pp->dcpc_actv_req_idx = pp->dcpc_picno = -1; return (-1); } /* * If only one enabling is active then remove the context and free * everything up. If there are multiple enablings active then remove this * one, its associated meta-data and re-program the hardware. */ /*ARGSUSED*/ static void dcpc_disable(void *arg, dtrace_id_t id, void *parg) { cpu_t *c; dcpc_probe_t *pp = parg; ASSERT(MUTEX_HELD(&cpu_lock)); kpreempt_disable(); /* * This probe didn't actually make it as far as being fully enabled * so we needn't do anything with it. */ if (pp->dcpc_enabled == 0) { /* * If we actually allocated this request a slot in the * request array but failed to enabled it then remove the * entry in the array. */ if (pp->dcpc_actv_req_idx >= 0) { dcpc_actv_reqs[pp->dcpc_actv_req_idx] = NULL; pp->dcpc_actv_req_idx = pp->dcpc_picno = pp->dcpc_disabling = -1; } kpreempt_enable(); return; } /* * If this is the only enabling then stop all the counters and * free up the meta-data. */ if (dcpc_enablings == 1) { ASSERT(dtrace_cpc_in_use == 1); dcpc_block_interrupts(); c = cpu_list; do { dcpc_disable_cpu(c); } while ((c = c->cpu_next) != cpu_list); dcpc_actv_reqs[pp->dcpc_actv_req_idx] = NULL; dcpc_release_interrupts(); } else { /* * This platform can support multiple overflow events and * the enabling being disabled is not the last one. Remove this * enabling and re-program the hardware with the new config. */ ASSERT(dcpc_mult_ovf_cap); ASSERT(dcpc_enablings > 1); pp->dcpc_disabling = 1; (void) dcpc_program_event(pp); } kpreempt_enable(); dcpc_enablings--; dtrace_cpc_in_use--; pp->dcpc_enabled = 0; pp->dcpc_actv_req_idx = pp->dcpc_picno = pp->dcpc_disabling = -1; } /*ARGSUSED*/ static int dcpc_cpu_setup(cpu_setup_t what, processorid_t cpu, void *arg) { cpu_t *c; uint8_t *state; ASSERT(MUTEX_HELD(&cpu_lock)); switch (what) { case CPU_OFF: /* * Offline CPUs are not allowed to take part so remove this * CPU if we are actively tracing. */ if (dtrace_cpc_in_use) { c = cpu_get(cpu); state = &cpu_core[c->cpu_id].cpuc_dcpc_intr_state; /* * Indicate that a configuration is in process in * order to stop overflow interrupts being processed * on this CPU while we disable it. */ while (atomic_cas_8(state, DCPC_INTR_FREE, DCPC_INTR_CONFIG) != DCPC_INTR_FREE) continue; dcpc_disable_cpu(c); /* * Reset this CPUs interrupt state as the configuration * has ended. */ cpu_core[c->cpu_id].cpuc_dcpc_intr_state = DCPC_INTR_FREE; membar_producer(); } break; case CPU_ON: case CPU_SETUP: /* * This CPU is being initialized or brought online so program * it with the current request set if we are actively tracing. */ if (dtrace_cpc_in_use) { c = cpu_get(cpu); (void) dcpc_program_cpu_event(c); } break; default: break; } return (0); } static dtrace_pattr_t dcpc_attr = { { DTRACE_STABILITY_EVOLVING, DTRACE_STABILITY_EVOLVING, DTRACE_CLASS_COMMON }, { DTRACE_STABILITY_PRIVATE, DTRACE_STABILITY_PRIVATE, DTRACE_CLASS_UNKNOWN }, { DTRACE_STABILITY_PRIVATE, DTRACE_STABILITY_PRIVATE, DTRACE_CLASS_UNKNOWN }, { DTRACE_STABILITY_EVOLVING, DTRACE_STABILITY_EVOLVING, DTRACE_CLASS_CPU }, { DTRACE_STABILITY_EVOLVING, DTRACE_STABILITY_EVOLVING, DTRACE_CLASS_COMMON }, }; static dtrace_pops_t dcpc_pops = { dcpc_provide, NULL, dcpc_enable, dcpc_disable, NULL, NULL, NULL, NULL, dcpc_usermode, dcpc_destroy }; /*ARGSUSED*/ static int dcpc_open(dev_t *devp, int flag, int otyp, cred_t *cred_p) { return (0); } /*ARGSUSED*/ static int dcpc_info(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg, void **result) { int error; switch (infocmd) { case DDI_INFO_DEVT2DEVINFO: *result = (void *)dcpc_devi; error = DDI_SUCCESS; break; case DDI_INFO_DEVT2INSTANCE: *result = (void *)0; error = DDI_SUCCESS; break; default: error = DDI_FAILURE; } return (error); } static int dcpc_detach(dev_info_t *devi, ddi_detach_cmd_t cmd) { switch (cmd) { case DDI_DETACH: break; case DDI_SUSPEND: return (DDI_SUCCESS); default: return (DDI_FAILURE); } if (dtrace_unregister(dcpc_pid) != 0) return (DDI_FAILURE); ddi_remove_minor_node(devi, NULL); mutex_enter(&cpu_lock); unregister_cpu_setup_func(dcpc_cpu_setup, NULL); mutex_exit(&cpu_lock); kmem_free(dcpc_actv_reqs, cpc_ncounters * sizeof (dcpc_probe_t *)); kcpc_unregister_dcpc(); return (DDI_SUCCESS); } static int dcpc_attach(dev_info_t *devi, ddi_attach_cmd_t cmd) { uint_t caps; char *attrs; switch (cmd) { case DDI_ATTACH: break; case DDI_RESUME: return (DDI_SUCCESS); default: return (DDI_FAILURE); } if (kcpc_pcbe_loaded() == -1) return (DDI_FAILURE); caps = kcpc_pcbe_capabilities(); if (!(caps & CPC_CAP_OVERFLOW_INTERRUPT)) { cmn_err(CE_WARN, "dcpc: Counter Overflow not supported"\ " on this processor\n"); return (DDI_FAILURE); } if (ddi_create_minor_node(devi, "dcpc", S_IFCHR, 0, DDI_PSEUDO, NULL) == DDI_FAILURE || dtrace_register("cpc", &dcpc_attr, DTRACE_PRIV_KERNEL, NULL, &dcpc_pops, NULL, &dcpc_pid) != 0) { ddi_remove_minor_node(devi, NULL); return (DDI_FAILURE); } mutex_enter(&cpu_lock); register_cpu_setup_func(dcpc_cpu_setup, NULL); mutex_exit(&cpu_lock); dcpc_ovf_mask = (1 << cpc_ncounters) - 1; ASSERT(dcpc_ovf_mask != 0); if (caps & CPC_CAP_OVERFLOW_PRECISE) dcpc_mult_ovf_cap = 1; /* * Determine which, if any, mask attribute the back-end can use. */ attrs = kcpc_list_attrs(); if (strstr(attrs, "umask") != NULL) dcpc_mask_type |= DCPC_UMASK; else if (strstr(attrs, "emask") != NULL) dcpc_mask_type |= DCPC_EMASK; /* * The dcpc_actv_reqs array is used to store the requests that * we currently have programmed. The order of requests in this * array is not necessarily the order that the event appears in * the kcpc_request_t array. Once entered into a slot in the array * the entry is not moved until it's removed. */ dcpc_actv_reqs = kmem_zalloc(cpc_ncounters * sizeof (dcpc_probe_t *), KM_SLEEP); dcpc_min_overflow = ddi_prop_get_int(DDI_DEV_T_ANY, devi, DDI_PROP_DONTPASS, "dcpc-min-overflow", DCPC_MIN_OVF_DEFAULT); kcpc_register_dcpc(dcpc_fire); ddi_report_dev(devi); dcpc_devi = devi; return (DDI_SUCCESS); } static struct cb_ops dcpc_cb_ops = { dcpc_open, /* open */ nodev, /* close */ nulldev, /* strategy */ nulldev, /* print */ nodev, /* dump */ nodev, /* read */ nodev, /* write */ nodev, /* ioctl */ nodev, /* devmap */ nodev, /* mmap */ nodev, /* segmap */ nochpoll, /* poll */ ddi_prop_op, /* cb_prop_op */ 0, /* streamtab */ D_NEW | D_MP /* Driver compatibility flag */ }; static struct dev_ops dcpc_ops = { DEVO_REV, /* devo_rev, */ 0, /* refcnt */ dcpc_info, /* get_dev_info */ nulldev, /* identify */ nulldev, /* probe */ dcpc_attach, /* attach */ dcpc_detach, /* detach */ nodev, /* reset */ &dcpc_cb_ops, /* driver operations */ NULL, /* bus operations */ nodev, /* dev power */ ddi_quiesce_not_needed /* quiesce */ }; /* * Module linkage information for the kernel. */ static struct modldrv modldrv = { &mod_driverops, /* module type */ "DTrace CPC Module", /* name of module */ &dcpc_ops, /* driver ops */ }; static struct modlinkage modlinkage = { MODREV_1, (void *)&modldrv, NULL }; int _init(void) { return (mod_install(&modlinkage)); } int _info(struct modinfo *modinfop) { return (mod_info(&modlinkage, modinfop)); } int _fini(void) { return (mod_remove(&modlinkage)); }