/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2009 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ /* Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T */ /* All Rights Reserved */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define BOUND_CPU 0x1 #define BOUND_PARTITION 0x2 #define BOUND_INTR 0x4 /* Dispatch queue allocation structure and functions */ struct disp_queue_info { disp_t *dp; dispq_t *olddispq; dispq_t *newdispq; ulong_t *olddqactmap; ulong_t *newdqactmap; int oldnglobpris; }; static void disp_dq_alloc(struct disp_queue_info *dptr, int numpris, disp_t *dp); static void disp_dq_assign(struct disp_queue_info *dptr, int numpris); static void disp_dq_free(struct disp_queue_info *dptr); /* platform-specific routine to call when processor is idle */ static void generic_idle_cpu(); void (*idle_cpu)() = generic_idle_cpu; /* routines invoked when a CPU enters/exits the idle loop */ static void idle_enter(); static void idle_exit(); /* platform-specific routine to call when thread is enqueued */ static void generic_enq_thread(cpu_t *, int); void (*disp_enq_thread)(cpu_t *, int) = generic_enq_thread; pri_t kpreemptpri; /* priority where kernel preemption applies */ pri_t upreemptpri = 0; /* priority where normal preemption applies */ pri_t intr_pri; /* interrupt thread priority base level */ #define KPQPRI -1 /* pri where cpu affinity is dropped for kpq */ pri_t kpqpri = KPQPRI; /* can be set in /etc/system */ disp_t cpu0_disp; /* boot CPU's dispatch queue */ disp_lock_t swapped_lock; /* lock swapped threads and swap queue */ int nswapped; /* total number of swapped threads */ void disp_swapped_enq(kthread_t *tp); static void disp_swapped_setrun(kthread_t *tp); static void cpu_resched(cpu_t *cp, pri_t tpri); /* * If this is set, only interrupt threads will cause kernel preemptions. * This is done by changing the value of kpreemptpri. kpreemptpri * will either be the max sysclass pri + 1 or the min interrupt pri. */ int only_intr_kpreempt; extern void set_idle_cpu(int cpun); extern void unset_idle_cpu(int cpun); static void setkpdq(kthread_t *tp, int borf); #define SETKP_BACK 0 #define SETKP_FRONT 1 /* * Parameter that determines how recently a thread must have run * on the CPU to be considered loosely-bound to that CPU to reduce * cold cache effects. The interval is in hertz. */ #define RECHOOSE_INTERVAL 3 int rechoose_interval = RECHOOSE_INTERVAL; /* * Parameter that determines how long (in nanoseconds) a thread must * be sitting on a run queue before it can be stolen by another CPU * to reduce migrations. The interval is in nanoseconds. * * The nosteal_nsec should be set by platform code cmp_set_nosteal_interval() * to an appropriate value. nosteal_nsec is set to NOSTEAL_UNINITIALIZED * here indicating it is uninitiallized. * Setting nosteal_nsec to 0 effectively disables the nosteal 'protection'. * */ #define NOSTEAL_UNINITIALIZED (-1) hrtime_t nosteal_nsec = NOSTEAL_UNINITIALIZED; extern void cmp_set_nosteal_interval(void); id_t defaultcid; /* system "default" class; see dispadmin(1M) */ disp_lock_t transition_lock; /* lock on transitioning threads */ disp_lock_t stop_lock; /* lock on stopped threads */ static void cpu_dispqalloc(int numpris); /* * This gets returned by disp_getwork/disp_getbest if we couldn't steal * a thread because it was sitting on its run queue for a very short * period of time. */ #define T_DONTSTEAL (kthread_t *)(-1) /* returned by disp_getwork/getbest */ static kthread_t *disp_getwork(cpu_t *to); static kthread_t *disp_getbest(disp_t *from); static kthread_t *disp_ratify(kthread_t *tp, disp_t *kpq); void swtch_to(kthread_t *); /* * dispatcher and scheduler initialization */ /* * disp_setup - Common code to calculate and allocate dispatcher * variables and structures based on the maximum priority. */ static void disp_setup(pri_t maxglobpri, pri_t oldnglobpris) { pri_t newnglobpris; ASSERT(MUTEX_HELD(&cpu_lock)); newnglobpris = maxglobpri + 1 + LOCK_LEVEL; if (newnglobpris > oldnglobpris) { /* * Allocate new kp queues for each CPU partition. */ cpupart_kpqalloc(newnglobpris); /* * Allocate new dispatch queues for each CPU. */ cpu_dispqalloc(newnglobpris); /* * compute new interrupt thread base priority */ intr_pri = maxglobpri; if (only_intr_kpreempt) { kpreemptpri = intr_pri + 1; if (kpqpri == KPQPRI) kpqpri = kpreemptpri; } v.v_nglobpris = newnglobpris; } } /* * dispinit - Called to initialize all loaded classes and the * dispatcher framework. */ void dispinit(void) { id_t cid; pri_t maxglobpri; pri_t cl_maxglobpri; maxglobpri = -1; /* * Initialize transition lock, which will always be set. */ DISP_LOCK_INIT(&transition_lock); disp_lock_enter_high(&transition_lock); DISP_LOCK_INIT(&stop_lock); mutex_enter(&cpu_lock); CPU->cpu_disp->disp_maxrunpri = -1; CPU->cpu_disp->disp_max_unbound_pri = -1; /* * Initialize the default CPU partition. */ cpupart_initialize_default(); /* * Call the class specific initialization functions for * all pre-installed schedulers. * * We pass the size of a class specific parameter * buffer to each of the initialization functions * to try to catch problems with backward compatibility * of class modules. * * For example a new class module running on an old system * which didn't provide sufficiently large parameter buffers * would be bad news. Class initialization modules can check for * this and take action if they detect a problem. */ for (cid = 0; cid < nclass; cid++) { sclass_t *sc; sc = &sclass[cid]; if (SCHED_INSTALLED(sc)) { cl_maxglobpri = sc->cl_init(cid, PC_CLPARMSZ, &sc->cl_funcs); if (cl_maxglobpri > maxglobpri) maxglobpri = cl_maxglobpri; } } kpreemptpri = (pri_t)v.v_maxsyspri + 1; if (kpqpri == KPQPRI) kpqpri = kpreemptpri; ASSERT(maxglobpri >= 0); disp_setup(maxglobpri, 0); mutex_exit(&cpu_lock); /* * Platform specific sticky scheduler setup. */ if (nosteal_nsec == NOSTEAL_UNINITIALIZED) cmp_set_nosteal_interval(); /* * Get the default class ID; this may be later modified via * dispadmin(1M). This will load the class (normally TS) and that will * call disp_add(), which is why we had to drop cpu_lock first. */ if (getcid(defaultclass, &defaultcid) != 0) { cmn_err(CE_PANIC, "Couldn't load default scheduling class '%s'", defaultclass); } } /* * disp_add - Called with class pointer to initialize the dispatcher * for a newly loaded class. */ void disp_add(sclass_t *clp) { pri_t maxglobpri; pri_t cl_maxglobpri; mutex_enter(&cpu_lock); /* * Initialize the scheduler class. */ maxglobpri = (pri_t)(v.v_nglobpris - LOCK_LEVEL - 1); cl_maxglobpri = clp->cl_init(clp - sclass, PC_CLPARMSZ, &clp->cl_funcs); if (cl_maxglobpri > maxglobpri) maxglobpri = cl_maxglobpri; /* * Save old queue information. Since we're initializing a * new scheduling class which has just been loaded, then * the size of the dispq may have changed. We need to handle * that here. */ disp_setup(maxglobpri, v.v_nglobpris); mutex_exit(&cpu_lock); } /* * For each CPU, allocate new dispatch queues * with the stated number of priorities. */ static void cpu_dispqalloc(int numpris) { cpu_t *cpup; struct disp_queue_info *disp_mem; int i, num; ASSERT(MUTEX_HELD(&cpu_lock)); disp_mem = kmem_zalloc(NCPU * sizeof (struct disp_queue_info), KM_SLEEP); /* * This routine must allocate all of the memory before stopping * the cpus because it must not sleep in kmem_alloc while the * CPUs are stopped. Locks they hold will not be freed until they * are restarted. */ i = 0; cpup = cpu_list; do { disp_dq_alloc(&disp_mem[i], numpris, cpup->cpu_disp); i++; cpup = cpup->cpu_next; } while (cpup != cpu_list); num = i; pause_cpus(NULL); for (i = 0; i < num; i++) disp_dq_assign(&disp_mem[i], numpris); start_cpus(); /* * I must free all of the memory after starting the cpus because * I can not risk sleeping in kmem_free while the cpus are stopped. */ for (i = 0; i < num; i++) disp_dq_free(&disp_mem[i]); kmem_free(disp_mem, NCPU * sizeof (struct disp_queue_info)); } static void disp_dq_alloc(struct disp_queue_info *dptr, int numpris, disp_t *dp) { dptr->newdispq = kmem_zalloc(numpris * sizeof (dispq_t), KM_SLEEP); dptr->newdqactmap = kmem_zalloc(((numpris / BT_NBIPUL) + 1) * sizeof (long), KM_SLEEP); dptr->dp = dp; } static void disp_dq_assign(struct disp_queue_info *dptr, int numpris) { disp_t *dp; dp = dptr->dp; dptr->olddispq = dp->disp_q; dptr->olddqactmap = dp->disp_qactmap; dptr->oldnglobpris = dp->disp_npri; ASSERT(dptr->oldnglobpris < numpris); if (dptr->olddispq != NULL) { /* * Use kcopy because bcopy is platform-specific * and could block while we might have paused the cpus. */ (void) kcopy(dptr->olddispq, dptr->newdispq, dptr->oldnglobpris * sizeof (dispq_t)); (void) kcopy(dptr->olddqactmap, dptr->newdqactmap, ((dptr->oldnglobpris / BT_NBIPUL) + 1) * sizeof (long)); } dp->disp_q = dptr->newdispq; dp->disp_qactmap = dptr->newdqactmap; dp->disp_q_limit = &dptr->newdispq[numpris]; dp->disp_npri = numpris; } static void disp_dq_free(struct disp_queue_info *dptr) { if (dptr->olddispq != NULL) kmem_free(dptr->olddispq, dptr->oldnglobpris * sizeof (dispq_t)); if (dptr->olddqactmap != NULL) kmem_free(dptr->olddqactmap, ((dptr->oldnglobpris / BT_NBIPUL) + 1) * sizeof (long)); } /* * For a newly created CPU, initialize the dispatch queue. * This is called before the CPU is known through cpu[] or on any lists. */ void disp_cpu_init(cpu_t *cp) { disp_t *dp; dispq_t *newdispq; ulong_t *newdqactmap; ASSERT(MUTEX_HELD(&cpu_lock)); /* protect dispatcher queue sizes */ if (cp == cpu0_disp.disp_cpu) dp = &cpu0_disp; else dp = kmem_alloc(sizeof (disp_t), KM_SLEEP); bzero(dp, sizeof (disp_t)); cp->cpu_disp = dp; dp->disp_cpu = cp; dp->disp_maxrunpri = -1; dp->disp_max_unbound_pri = -1; DISP_LOCK_INIT(&cp->cpu_thread_lock); /* * Allocate memory for the dispatcher queue headers * and the active queue bitmap. */ newdispq = kmem_zalloc(v.v_nglobpris * sizeof (dispq_t), KM_SLEEP); newdqactmap = kmem_zalloc(((v.v_nglobpris / BT_NBIPUL) + 1) * sizeof (long), KM_SLEEP); dp->disp_q = newdispq; dp->disp_qactmap = newdqactmap; dp->disp_q_limit = &newdispq[v.v_nglobpris]; dp->disp_npri = v.v_nglobpris; } void disp_cpu_fini(cpu_t *cp) { ASSERT(MUTEX_HELD(&cpu_lock)); disp_kp_free(cp->cpu_disp); if (cp->cpu_disp != &cpu0_disp) kmem_free(cp->cpu_disp, sizeof (disp_t)); } /* * Allocate new, larger kpreempt dispatch queue to replace the old one. */ void disp_kp_alloc(disp_t *dq, pri_t npri) { struct disp_queue_info mem_info; if (npri > dq->disp_npri) { /* * Allocate memory for the new array. */ disp_dq_alloc(&mem_info, npri, dq); /* * We need to copy the old structures to the new * and free the old. */ disp_dq_assign(&mem_info, npri); disp_dq_free(&mem_info); } } /* * Free dispatch queue. * Used for the kpreempt queues for a removed CPU partition and * for the per-CPU queues of deleted CPUs. */ void disp_kp_free(disp_t *dq) { struct disp_queue_info mem_info; mem_info.olddispq = dq->disp_q; mem_info.olddqactmap = dq->disp_qactmap; mem_info.oldnglobpris = dq->disp_npri; disp_dq_free(&mem_info); } /* * End dispatcher and scheduler initialization. */ /* * See if there's anything to do other than remain idle. * Return non-zero if there is. * * This function must be called with high spl, or with * kernel preemption disabled to prevent the partition's * active cpu list from changing while being traversed. * * This is essentially a simpler version of disp_getwork() * to be called by CPUs preparing to "halt". */ int disp_anywork(void) { cpu_t *cp = CPU; cpu_t *ocp; volatile int *local_nrunnable = &cp->cpu_disp->disp_nrunnable; if (!(cp->cpu_flags & CPU_OFFLINE)) { if (CP_MAXRUNPRI(cp->cpu_part) >= 0) return (1); for (ocp = cp->cpu_next_part; ocp != cp; ocp = ocp->cpu_next_part) { ASSERT(CPU_ACTIVE(ocp)); /* * Something has appeared on the local run queue. */ if (*local_nrunnable > 0) return (1); /* * If we encounter another idle CPU that will * soon be trolling around through disp_anywork() * terminate our walk here and let this other CPU * patrol the next part of the list. */ if (ocp->cpu_dispatch_pri == -1 && (ocp->cpu_disp_flags & CPU_DISP_HALTED) == 0) return (0); /* * Work can be taken from another CPU if: * - There is unbound work on the run queue * - That work isn't a thread undergoing a * - context switch on an otherwise empty queue. * - The CPU isn't running the idle loop. */ if (ocp->cpu_disp->disp_max_unbound_pri != -1 && !((ocp->cpu_disp_flags & CPU_DISP_DONTSTEAL) && ocp->cpu_disp->disp_nrunnable == 1) && ocp->cpu_dispatch_pri != -1) return (1); } } return (0); } /* * Called when CPU enters the idle loop */ static void idle_enter() { cpu_t *cp = CPU; new_cpu_mstate(CMS_IDLE, gethrtime_unscaled()); CPU_STATS_ADDQ(cp, sys, idlethread, 1); set_idle_cpu(cp->cpu_id); /* arch-dependent hook */ } /* * Called when CPU exits the idle loop */ static void idle_exit() { cpu_t *cp = CPU; new_cpu_mstate(CMS_SYSTEM, gethrtime_unscaled()); unset_idle_cpu(cp->cpu_id); /* arch-dependent hook */ } /* * Idle loop. */ void idle() { struct cpu *cp = CPU; /* pointer to this CPU */ kthread_t *t; /* taken thread */ idle_enter(); /* * Uniprocessor version of idle loop. * Do this until notified that we're on an actual multiprocessor. */ while (ncpus == 1) { if (cp->cpu_disp->disp_nrunnable == 0) { (*idle_cpu)(); continue; } idle_exit(); swtch(); idle_enter(); /* returned from swtch */ } /* * Multiprocessor idle loop. */ for (;;) { /* * If CPU is completely quiesced by p_online(2), just wait * here with minimal bus traffic until put online. */ while (cp->cpu_flags & CPU_QUIESCED) (*idle_cpu)(); if (cp->cpu_disp->disp_nrunnable != 0) { idle_exit(); swtch(); } else { if (cp->cpu_flags & CPU_OFFLINE) continue; if ((t = disp_getwork(cp)) == NULL) { if (cp->cpu_chosen_level != -1) { disp_t *dp = cp->cpu_disp; disp_t *kpq; disp_lock_enter(&dp->disp_lock); /* * Set kpq under lock to prevent * migration between partitions. */ kpq = &cp->cpu_part->cp_kp_queue; if (kpq->disp_maxrunpri == -1) cp->cpu_chosen_level = -1; disp_lock_exit(&dp->disp_lock); } (*idle_cpu)(); continue; } /* * If there was a thread but we couldn't steal * it, then keep trying. */ if (t == T_DONTSTEAL) continue; idle_exit(); swtch_to(t); } idle_enter(); /* returned from swtch/swtch_to */ } } /* * Preempt the currently running thread in favor of the highest * priority thread. The class of the current thread controls * where it goes on the dispatcher queues. If panicking, turn * preemption off. */ void preempt() { kthread_t *t = curthread; klwp_t *lwp = ttolwp(curthread); if (panicstr) return; TRACE_0(TR_FAC_DISP, TR_PREEMPT_START, "preempt_start"); thread_lock(t); if (t->t_state != TS_ONPROC || t->t_disp_queue != CPU->cpu_disp) { /* * this thread has already been chosen to be run on * another CPU. Clear kprunrun on this CPU since we're * already headed for swtch(). */ CPU->cpu_kprunrun = 0; thread_unlock_nopreempt(t); TRACE_0(TR_FAC_DISP, TR_PREEMPT_END, "preempt_end"); } else { if (lwp != NULL) lwp->lwp_ru.nivcsw++; CPU_STATS_ADDQ(CPU, sys, inv_swtch, 1); THREAD_TRANSITION(t); CL_PREEMPT(t); DTRACE_SCHED(preempt); thread_unlock_nopreempt(t); TRACE_0(TR_FAC_DISP, TR_PREEMPT_END, "preempt_end"); swtch(); /* clears CPU->cpu_runrun via disp() */ } } extern kthread_t *thread_unpin(); /* * disp() - find the highest priority thread for this processor to run, and * set it in TS_ONPROC state so that resume() can be called to run it. */ static kthread_t * disp() { cpu_t *cpup; disp_t *dp; kthread_t *tp; dispq_t *dq; int maxrunword; pri_t pri; disp_t *kpq; TRACE_0(TR_FAC_DISP, TR_DISP_START, "disp_start"); cpup = CPU; /* * Find the highest priority loaded, runnable thread. */ dp = cpup->cpu_disp; reschedule: /* * If there is more important work on the global queue with a better * priority than the maximum on this CPU, take it now. */ kpq = &cpup->cpu_part->cp_kp_queue; while ((pri = kpq->disp_maxrunpri) >= 0 && pri >= dp->disp_maxrunpri && (cpup->cpu_flags & CPU_OFFLINE) == 0 && (tp = disp_getbest(kpq)) != NULL) { if (disp_ratify(tp, kpq) != NULL) { TRACE_1(TR_FAC_DISP, TR_DISP_END, "disp_end:tid %p", tp); return (tp); } } disp_lock_enter(&dp->disp_lock); pri = dp->disp_maxrunpri; /* * If there is nothing to run, look at what's runnable on other queues. * Choose the idle thread if the CPU is quiesced. * Note that CPUs that have the CPU_OFFLINE flag set can still run * interrupt threads, which will be the only threads on the CPU's own * queue, but cannot run threads from other queues. */ if (pri == -1) { if (!(cpup->cpu_flags & CPU_OFFLINE)) { disp_lock_exit(&dp->disp_lock); if ((tp = disp_getwork(cpup)) == NULL || tp == T_DONTSTEAL) { tp = cpup->cpu_idle_thread; (void) splhigh(); THREAD_ONPROC(tp, cpup); cpup->cpu_dispthread = tp; cpup->cpu_dispatch_pri = -1; cpup->cpu_runrun = cpup->cpu_kprunrun = 0; cpup->cpu_chosen_level = -1; } } else { disp_lock_exit_high(&dp->disp_lock); tp = cpup->cpu_idle_thread; THREAD_ONPROC(tp, cpup); cpup->cpu_dispthread = tp; cpup->cpu_dispatch_pri = -1; cpup->cpu_runrun = cpup->cpu_kprunrun = 0; cpup->cpu_chosen_level = -1; } TRACE_1(TR_FAC_DISP, TR_DISP_END, "disp_end:tid %p", tp); return (tp); } dq = &dp->disp_q[pri]; tp = dq->dq_first; ASSERT(tp != NULL); ASSERT(tp->t_schedflag & TS_LOAD); /* thread must be swapped in */ DTRACE_SCHED2(dequeue, kthread_t *, tp, disp_t *, dp); /* * Found it so remove it from queue. */ dp->disp_nrunnable--; dq->dq_sruncnt--; if ((dq->dq_first = tp->t_link) == NULL) { ulong_t *dqactmap = dp->disp_qactmap; ASSERT(dq->dq_sruncnt == 0); dq->dq_last = NULL; /* * The queue is empty, so the corresponding bit needs to be * turned off in dqactmap. If nrunnable != 0 just took the * last runnable thread off the * highest queue, so recompute disp_maxrunpri. */ maxrunword = pri >> BT_ULSHIFT; dqactmap[maxrunword] &= ~BT_BIW(pri); if (dp->disp_nrunnable == 0) { dp->disp_max_unbound_pri = -1; dp->disp_maxrunpri = -1; } else { int ipri; ipri = bt_gethighbit(dqactmap, maxrunword); dp->disp_maxrunpri = ipri; if (ipri < dp->disp_max_unbound_pri) dp->disp_max_unbound_pri = ipri; } } else { tp->t_link = NULL; } /* * Set TS_DONT_SWAP flag to prevent another processor from swapping * out this thread before we have a chance to run it. * While running, it is protected against swapping by t_lock. */ tp->t_schedflag |= TS_DONT_SWAP; cpup->cpu_dispthread = tp; /* protected by spl only */ cpup->cpu_dispatch_pri = pri; ASSERT(pri == DISP_PRIO(tp)); thread_onproc(tp, cpup); /* set t_state to TS_ONPROC */ disp_lock_exit_high(&dp->disp_lock); /* drop run queue lock */ ASSERT(tp != NULL); TRACE_1(TR_FAC_DISP, TR_DISP_END, "disp_end:tid %p", tp); if (disp_ratify(tp, kpq) == NULL) goto reschedule; return (tp); } /* * swtch() * Find best runnable thread and run it. * Called with the current thread already switched to a new state, * on a sleep queue, run queue, stopped, and not zombied. * May be called at any spl level less than or equal to LOCK_LEVEL. * Always drops spl to the base level (spl0()). */ void swtch() { kthread_t *t = curthread; kthread_t *next; cpu_t *cp; TRACE_0(TR_FAC_DISP, TR_SWTCH_START, "swtch_start"); if (t->t_flag & T_INTR_THREAD) cpu_intr_swtch_enter(t); if (t->t_intr != NULL) { /* * We are an interrupt thread. Setup and return * the interrupted thread to be resumed. */ (void) splhigh(); /* block other scheduler action */ cp = CPU; /* now protected against migration */ ASSERT(CPU_ON_INTR(cp) == 0); /* not called with PIL > 10 */ CPU_STATS_ADDQ(cp, sys, pswitch, 1); CPU_STATS_ADDQ(cp, sys, intrblk, 1); next = thread_unpin(); TRACE_0(TR_FAC_DISP, TR_RESUME_START, "resume_start"); resume_from_intr(next); } else { #ifdef DEBUG if (t->t_state == TS_ONPROC && t->t_disp_queue->disp_cpu == CPU && t->t_preempt == 0) { thread_lock(t); ASSERT(t->t_state != TS_ONPROC || t->t_disp_queue->disp_cpu != CPU || t->t_preempt != 0); /* cannot migrate */ thread_unlock_nopreempt(t); } #endif /* DEBUG */ cp = CPU; next = disp(); /* returns with spl high */ ASSERT(CPU_ON_INTR(cp) == 0); /* not called with PIL > 10 */ /* OK to steal anything left on run queue */ cp->cpu_disp_flags &= ~CPU_DISP_DONTSTEAL; if (next != t) { hrtime_t now; now = gethrtime_unscaled(); pg_ev_thread_swtch(cp, now, t, next); /* * If t was previously in the TS_ONPROC state, * setfrontdq and setbackdq won't have set its t_waitrq. * Since we now finally know that we're switching away * from this thread, set its t_waitrq if it is on a run * queue. */ if ((t->t_state == TS_RUN) && (t->t_waitrq == 0)) { t->t_waitrq = now; } /* * restore mstate of thread that we are switching to */ restore_mstate(next); CPU_STATS_ADDQ(cp, sys, pswitch, 1); cp->cpu_last_swtch = t->t_disp_time = ddi_get_lbolt(); TRACE_0(TR_FAC_DISP, TR_RESUME_START, "resume_start"); if (dtrace_vtime_active) dtrace_vtime_switch(next); resume(next); /* * The TR_RESUME_END and TR_SWTCH_END trace points * appear at the end of resume(), because we may not * return here */ } else { if (t->t_flag & T_INTR_THREAD) cpu_intr_swtch_exit(t); pg_ev_thread_remain(cp, t); DTRACE_SCHED(remain__cpu); TRACE_0(TR_FAC_DISP, TR_SWTCH_END, "swtch_end"); (void) spl0(); } } } /* * swtch_from_zombie() * Special case of swtch(), which allows checks for TS_ZOMB to be * eliminated from normal resume. * Find best runnable thread and run it. * Called with the current thread zombied. * Zombies cannot migrate, so CPU references are safe. */ void swtch_from_zombie() { kthread_t *next; cpu_t *cpu = CPU; TRACE_0(TR_FAC_DISP, TR_SWTCH_START, "swtch_start"); ASSERT(curthread->t_state == TS_ZOMB); next = disp(); /* returns with spl high */ ASSERT(CPU_ON_INTR(CPU) == 0); /* not called with PIL > 10 */ CPU_STATS_ADDQ(CPU, sys, pswitch, 1); ASSERT(next != curthread); TRACE_0(TR_FAC_DISP, TR_RESUME_START, "resume_start"); pg_ev_thread_swtch(cpu, gethrtime_unscaled(), curthread, next); restore_mstate(next); if (dtrace_vtime_active) dtrace_vtime_switch(next); resume_from_zombie(next); /* * The TR_RESUME_END and TR_SWTCH_END trace points * appear at the end of resume(), because we certainly will not * return here */ } #if defined(DEBUG) && (defined(DISP_DEBUG) || defined(lint)) /* * search_disp_queues() * Search the given dispatch queues for thread tp. * Return 1 if tp is found, otherwise return 0. */ static int search_disp_queues(disp_t *dp, kthread_t *tp) { dispq_t *dq; dispq_t *eq; disp_lock_enter_high(&dp->disp_lock); for (dq = dp->disp_q, eq = dp->disp_q_limit; dq < eq; ++dq) { kthread_t *rp; ASSERT(dq->dq_last == NULL || dq->dq_last->t_link == NULL); for (rp = dq->dq_first; rp; rp = rp->t_link) if (tp == rp) { disp_lock_exit_high(&dp->disp_lock); return (1); } } disp_lock_exit_high(&dp->disp_lock); return (0); } /* * thread_on_queue() * Search all per-CPU dispatch queues and all partition-wide kpreempt * queues for thread tp. Return 1 if tp is found, otherwise return 0. */ static int thread_on_queue(kthread_t *tp) { cpu_t *cp; struct cpupart *part; ASSERT(getpil() >= DISP_LEVEL); /* * Search the per-CPU dispatch queues for tp. */ cp = CPU; do { if (search_disp_queues(cp->cpu_disp, tp)) return (1); } while ((cp = cp->cpu_next_onln) != CPU); /* * Search the partition-wide kpreempt queues for tp. */ part = CPU->cpu_part; do { if (search_disp_queues(&part->cp_kp_queue, tp)) return (1); } while ((part = part->cp_next) != CPU->cpu_part); return (0); } #else #define thread_on_queue(tp) 0 /* ASSERT must be !thread_on_queue */ #endif /* DEBUG */ /* * like swtch(), but switch to a specified thread taken from another CPU. * called with spl high.. */ void swtch_to(kthread_t *next) { cpu_t *cp = CPU; hrtime_t now; TRACE_0(TR_FAC_DISP, TR_SWTCH_START, "swtch_start"); /* * Update context switch statistics. */ CPU_STATS_ADDQ(cp, sys, pswitch, 1); TRACE_0(TR_FAC_DISP, TR_RESUME_START, "resume_start"); now = gethrtime_unscaled(); pg_ev_thread_swtch(cp, now, curthread, next); /* OK to steal anything left on run queue */ cp->cpu_disp_flags &= ~CPU_DISP_DONTSTEAL; /* record last execution time */ cp->cpu_last_swtch = curthread->t_disp_time = ddi_get_lbolt(); /* * If t was previously in the TS_ONPROC state, setfrontdq and setbackdq * won't have set its t_waitrq. Since we now finally know that we're * switching away from this thread, set its t_waitrq if it is on a run * queue. */ if ((curthread->t_state == TS_RUN) && (curthread->t_waitrq == 0)) { curthread->t_waitrq = now; } /* restore next thread to previously running microstate */ restore_mstate(next); if (dtrace_vtime_active) dtrace_vtime_switch(next); resume(next); /* * The TR_RESUME_END and TR_SWTCH_END trace points * appear at the end of resume(), because we may not * return here */ } #define CPU_IDLING(pri) ((pri) == -1) static void cpu_resched(cpu_t *cp, pri_t tpri) { int call_poke_cpu = 0; pri_t cpupri = cp->cpu_dispatch_pri; if (!CPU_IDLING(cpupri) && (cpupri < tpri)) { TRACE_2(TR_FAC_DISP, TR_CPU_RESCHED, "CPU_RESCHED:Tpri %d Cpupri %d", tpri, cpupri); if (tpri >= upreemptpri && cp->cpu_runrun == 0) { cp->cpu_runrun = 1; aston(cp->cpu_dispthread); if (tpri < kpreemptpri && cp != CPU) call_poke_cpu = 1; } if (tpri >= kpreemptpri && cp->cpu_kprunrun == 0) { cp->cpu_kprunrun = 1; if (cp != CPU) call_poke_cpu = 1; } } /* * Propagate cpu_runrun, and cpu_kprunrun to global visibility. */ membar_enter(); if (call_poke_cpu) poke_cpu(cp->cpu_id); } /* * setbackdq() keeps runqs balanced such that the difference in length * between the chosen runq and the next one is no more than RUNQ_MAX_DIFF. * For threads with priorities below RUNQ_MATCH_PRI levels, the runq's lengths * must match. When per-thread TS_RUNQMATCH flag is set, setbackdq() will * try to keep runqs perfectly balanced regardless of the thread priority. */ #define RUNQ_MATCH_PRI 16 /* pri below which queue lengths must match */ #define RUNQ_MAX_DIFF 2 /* maximum runq length difference */ #define RUNQ_LEN(cp, pri) ((cp)->cpu_disp->disp_q[pri].dq_sruncnt) /* * Macro that evaluates to true if it is likely that the thread has cache * warmth. This is based on the amount of time that has elapsed since the * thread last ran. If that amount of time is less than "rechoose_interval" * ticks, then we decide that the thread has enough cache warmth to warrant * some affinity for t->t_cpu. */ #define THREAD_HAS_CACHE_WARMTH(thread) \ ((thread == curthread) || \ ((ddi_get_lbolt() - thread->t_disp_time) <= rechoose_interval)) /* * Put the specified thread on the back of the dispatcher * queue corresponding to its current priority. * * Called with the thread in transition, onproc or stopped state * and locked (transition implies locked) and at high spl. * Returns with the thread in TS_RUN state and still locked. */ void setbackdq(kthread_t *tp) { dispq_t *dq; disp_t *dp; cpu_t *cp; pri_t tpri; int bound; boolean_t self; ASSERT(THREAD_LOCK_HELD(tp)); ASSERT((tp->t_schedflag & TS_ALLSTART) == 0); ASSERT(!thread_on_queue(tp)); /* make sure tp isn't on a runq */ /* * If thread is "swapped" or on the swap queue don't * queue it, but wake sched. */ if ((tp->t_schedflag & (TS_LOAD | TS_ON_SWAPQ)) != TS_LOAD) { disp_swapped_setrun(tp); return; } self = (tp == curthread); if (tp->t_bound_cpu || tp->t_weakbound_cpu) bound = 1; else bound = 0; tpri = DISP_PRIO(tp); if (ncpus == 1) cp = tp->t_cpu; else if (!bound) { if (tpri >= kpqpri) { setkpdq(tp, SETKP_BACK); return; } /* * We'll generally let this thread continue to run where * it last ran...but will consider migration if: * - We thread probably doesn't have much cache warmth. * - The CPU where it last ran is the target of an offline * request. * - The thread last ran outside it's home lgroup. */ if ((!THREAD_HAS_CACHE_WARMTH(tp)) || (tp->t_cpu == cpu_inmotion)) { cp = disp_lowpri_cpu(tp->t_cpu, tp->t_lpl, tpri, NULL); } else if (!LGRP_CONTAINS_CPU(tp->t_lpl->lpl_lgrp, tp->t_cpu)) { cp = disp_lowpri_cpu(tp->t_cpu, tp->t_lpl, tpri, self ? tp->t_cpu : NULL); } else { cp = tp->t_cpu; } if (tp->t_cpupart == cp->cpu_part) { int qlen; /* * Perform any CMT load balancing */ cp = cmt_balance(tp, cp); /* * Balance across the run queues */ qlen = RUNQ_LEN(cp, tpri); if (tpri >= RUNQ_MATCH_PRI && !(tp->t_schedflag & TS_RUNQMATCH)) qlen -= RUNQ_MAX_DIFF; if (qlen > 0) { cpu_t *newcp; if (tp->t_lpl->lpl_lgrpid == LGRP_ROOTID) { newcp = cp->cpu_next_part; } else if ((newcp = cp->cpu_next_lpl) == cp) { newcp = cp->cpu_next_part; } if (RUNQ_LEN(newcp, tpri) < qlen) { DTRACE_PROBE3(runq__balance, kthread_t *, tp, cpu_t *, cp, cpu_t *, newcp); cp = newcp; } } } else { /* * Migrate to a cpu in the new partition. */ cp = disp_lowpri_cpu(tp->t_cpupart->cp_cpulist, tp->t_lpl, tp->t_pri, NULL); } ASSERT((cp->cpu_flags & CPU_QUIESCED) == 0); } else { /* * It is possible that t_weakbound_cpu != t_bound_cpu (for * a short time until weak binding that existed when the * strong binding was established has dropped) so we must * favour weak binding over strong. */ cp = tp->t_weakbound_cpu ? tp->t_weakbound_cpu : tp->t_bound_cpu; } /* * A thread that is ONPROC may be temporarily placed on the run queue * but then chosen to run again by disp. If the thread we're placing on * the queue is in TS_ONPROC state, don't set its t_waitrq until a * replacement process is actually scheduled in swtch(). In this * situation, curthread is the only thread that could be in the ONPROC * state. */ if ((!self) && (tp->t_waitrq == 0)) { hrtime_t curtime; curtime = gethrtime_unscaled(); (void) cpu_update_pct(tp, curtime); tp->t_waitrq = curtime; } else { (void) cpu_update_pct(tp, gethrtime_unscaled()); } dp = cp->cpu_disp; disp_lock_enter_high(&dp->disp_lock); DTRACE_SCHED3(enqueue, kthread_t *, tp, disp_t *, dp, int, 0); TRACE_3(TR_FAC_DISP, TR_BACKQ, "setbackdq:pri %d cpu %p tid %p", tpri, cp, tp); #ifndef NPROBE /* Kernel probe */ if (tnf_tracing_active) tnf_thread_queue(tp, cp, tpri); #endif /* NPROBE */ ASSERT(tpri >= 0 && tpri < dp->disp_npri); THREAD_RUN(tp, &dp->disp_lock); /* set t_state to TS_RUN */ tp->t_disp_queue = dp; tp->t_link = NULL; dq = &dp->disp_q[tpri]; dp->disp_nrunnable++; if (!bound) dp->disp_steal = 0; membar_enter(); if (dq->dq_sruncnt++ != 0) { ASSERT(dq->dq_first != NULL); dq->dq_last->t_link = tp; dq->dq_last = tp; } else { ASSERT(dq->dq_first == NULL); ASSERT(dq->dq_last == NULL); dq->dq_first = dq->dq_last = tp; BT_SET(dp->disp_qactmap, tpri); if (tpri > dp->disp_maxrunpri) { dp->disp_maxrunpri = tpri; membar_enter(); cpu_resched(cp, tpri); } } if (!bound && tpri > dp->disp_max_unbound_pri) { if (self && dp->disp_max_unbound_pri == -1 && cp == CPU) { /* * If there are no other unbound threads on the * run queue, don't allow other CPUs to steal * this thread while we are in the middle of a * context switch. We may just switch to it * again right away. CPU_DISP_DONTSTEAL is cleared * in swtch and swtch_to. */ cp->cpu_disp_flags |= CPU_DISP_DONTSTEAL; } dp->disp_max_unbound_pri = tpri; } (*disp_enq_thread)(cp, bound); } /* * Put the specified thread on the front of the dispatcher * queue corresponding to its current priority. * * Called with the thread in transition, onproc or stopped state * and locked (transition implies locked) and at high spl. * Returns with the thread in TS_RUN state and still locked. */ void setfrontdq(kthread_t *tp) { disp_t *dp; dispq_t *dq; cpu_t *cp; pri_t tpri; int bound; ASSERT(THREAD_LOCK_HELD(tp)); ASSERT((tp->t_schedflag & TS_ALLSTART) == 0); ASSERT(!thread_on_queue(tp)); /* make sure tp isn't on a runq */ /* * If thread is "swapped" or on the swap queue don't * queue it, but wake sched. */ if ((tp->t_schedflag & (TS_LOAD | TS_ON_SWAPQ)) != TS_LOAD) { disp_swapped_setrun(tp); return; } if (tp->t_bound_cpu || tp->t_weakbound_cpu) bound = 1; else bound = 0; tpri = DISP_PRIO(tp); if (ncpus == 1) cp = tp->t_cpu; else if (!bound) { if (tpri >= kpqpri) { setkpdq(tp, SETKP_FRONT); return; } cp = tp->t_cpu; if (tp->t_cpupart == cp->cpu_part) { /* * We'll generally let this thread continue to run * where it last ran, but will consider migration if: * - The thread last ran outside it's home lgroup. * - The CPU where it last ran is the target of an * offline request (a thread_nomigrate() on the in * motion CPU relies on this when forcing a preempt). * - The thread isn't the highest priority thread where * it last ran, and it is considered not likely to * have significant cache warmth. */ if ((!LGRP_CONTAINS_CPU(tp->t_lpl->lpl_lgrp, cp)) || (cp == cpu_inmotion)) { cp = disp_lowpri_cpu(tp->t_cpu, tp->t_lpl, tpri, (tp == curthread) ? cp : NULL); } else if ((tpri < cp->cpu_disp->disp_maxrunpri) && (!THREAD_HAS_CACHE_WARMTH(tp))) { cp = disp_lowpri_cpu(tp->t_cpu, tp->t_lpl, tpri, NULL); } } else { /* * Migrate to a cpu in the new partition. */ cp = disp_lowpri_cpu(tp->t_cpupart->cp_cpulist, tp->t_lpl, tp->t_pri, NULL); } ASSERT((cp->cpu_flags & CPU_QUIESCED) == 0); } else { /* * It is possible that t_weakbound_cpu != t_bound_cpu (for * a short time until weak binding that existed when the * strong binding was established has dropped) so we must * favour weak binding over strong. */ cp = tp->t_weakbound_cpu ? tp->t_weakbound_cpu : tp->t_bound_cpu; } /* * A thread that is ONPROC may be temporarily placed on the run queue * but then chosen to run again by disp. If the thread we're placing on * the queue is in TS_ONPROC state, don't set its t_waitrq until a * replacement process is actually scheduled in swtch(). In this * situation, curthread is the only thread that could be in the ONPROC * state. */ if ((tp != curthread) && (tp->t_waitrq == 0)) { hrtime_t curtime; curtime = gethrtime_unscaled(); (void) cpu_update_pct(tp, curtime); tp->t_waitrq = curtime; } else { (void) cpu_update_pct(tp, gethrtime_unscaled()); } dp = cp->cpu_disp; disp_lock_enter_high(&dp->disp_lock); TRACE_2(TR_FAC_DISP, TR_FRONTQ, "frontq:pri %d tid %p", tpri, tp); DTRACE_SCHED3(enqueue, kthread_t *, tp, disp_t *, dp, int, 1); #ifndef NPROBE /* Kernel probe */ if (tnf_tracing_active) tnf_thread_queue(tp, cp, tpri); #endif /* NPROBE */ ASSERT(tpri >= 0 && tpri < dp->disp_npri); THREAD_RUN(tp, &dp->disp_lock); /* set TS_RUN state and lock */ tp->t_disp_queue = dp; dq = &dp->disp_q[tpri]; dp->disp_nrunnable++; if (!bound) dp->disp_steal = 0; membar_enter(); if (dq->dq_sruncnt++ != 0) { ASSERT(dq->dq_last != NULL); tp->t_link = dq->dq_first; dq->dq_first = tp; } else { ASSERT(dq->dq_last == NULL); ASSERT(dq->dq_first == NULL); tp->t_link = NULL; dq->dq_first = dq->dq_last = tp; BT_SET(dp->disp_qactmap, tpri); if (tpri > dp->disp_maxrunpri) { dp->disp_maxrunpri = tpri; membar_enter(); cpu_resched(cp, tpri); } } if (!bound && tpri > dp->disp_max_unbound_pri) { if (tp == curthread && dp->disp_max_unbound_pri == -1 && cp == CPU) { /* * If there are no other unbound threads on the * run queue, don't allow other CPUs to steal * this thread while we are in the middle of a * context switch. We may just switch to it * again right away. CPU_DISP_DONTSTEAL is cleared * in swtch and swtch_to. */ cp->cpu_disp_flags |= CPU_DISP_DONTSTEAL; } dp->disp_max_unbound_pri = tpri; } (*disp_enq_thread)(cp, bound); } /* * Put a high-priority unbound thread on the kp queue */ static void setkpdq(kthread_t *tp, int borf) { dispq_t *dq; disp_t *dp; cpu_t *cp; pri_t tpri; tpri = DISP_PRIO(tp); dp = &tp->t_cpupart->cp_kp_queue; disp_lock_enter_high(&dp->disp_lock); TRACE_2(TR_FAC_DISP, TR_FRONTQ, "frontq:pri %d tid %p", tpri, tp); ASSERT(tpri >= 0 && tpri < dp->disp_npri); DTRACE_SCHED3(enqueue, kthread_t *, tp, disp_t *, dp, int, borf); THREAD_RUN(tp, &dp->disp_lock); /* set t_state to TS_RUN */ tp->t_disp_queue = dp; dp->disp_nrunnable++; dq = &dp->disp_q[tpri]; if (dq->dq_sruncnt++ != 0) { if (borf == SETKP_BACK) { ASSERT(dq->dq_first != NULL); tp->t_link = NULL; dq->dq_last->t_link = tp; dq->dq_last = tp; } else { ASSERT(dq->dq_last != NULL); tp->t_link = dq->dq_first; dq->dq_first = tp; } } else { if (borf == SETKP_BACK) { ASSERT(dq->dq_first == NULL); ASSERT(dq->dq_last == NULL); dq->dq_first = dq->dq_last = tp; } else { ASSERT(dq->dq_last == NULL); ASSERT(dq->dq_first == NULL); tp->t_link = NULL; dq->dq_first = dq->dq_last = tp; } BT_SET(dp->disp_qactmap, tpri); if (tpri > dp->disp_max_unbound_pri) dp->disp_max_unbound_pri = tpri; if (tpri > dp->disp_maxrunpri) { dp->disp_maxrunpri = tpri; membar_enter(); } } cp = tp->t_cpu; if (tp->t_cpupart != cp->cpu_part) { /* migrate to a cpu in the new partition */ cp = tp->t_cpupart->cp_cpulist; } cp = disp_lowpri_cpu(cp, tp->t_lpl, tp->t_pri, NULL); disp_lock_enter_high(&cp->cpu_disp->disp_lock); ASSERT((cp->cpu_flags & CPU_QUIESCED) == 0); #ifndef NPROBE /* Kernel probe */ if (tnf_tracing_active) tnf_thread_queue(tp, cp, tpri); #endif /* NPROBE */ if (cp->cpu_chosen_level < tpri) cp->cpu_chosen_level = tpri; cpu_resched(cp, tpri); disp_lock_exit_high(&cp->cpu_disp->disp_lock); (*disp_enq_thread)(cp, 0); } /* * Remove a thread from the dispatcher queue if it is on it. * It is not an error if it is not found but we return whether * or not it was found in case the caller wants to check. */ int dispdeq(kthread_t *tp) { disp_t *dp; dispq_t *dq; kthread_t *rp; kthread_t *trp; kthread_t **ptp; int tpri; ASSERT(THREAD_LOCK_HELD(tp)); if (tp->t_state != TS_RUN) return (0); /* * The thread is "swapped" or is on the swap queue and * hence no longer on the run queue, so return true. */ if ((tp->t_schedflag & (TS_LOAD | TS_ON_SWAPQ)) != TS_LOAD) return (1); tpri = DISP_PRIO(tp); dp = tp->t_disp_queue; ASSERT(tpri < dp->disp_npri); dq = &dp->disp_q[tpri]; ptp = &dq->dq_first; rp = *ptp; trp = NULL; ASSERT(dq->dq_last == NULL || dq->dq_last->t_link == NULL); /* * Search for thread in queue. * Double links would simplify this at the expense of disp/setrun. */ while (rp != tp && rp != NULL) { trp = rp; ptp = &trp->t_link; rp = trp->t_link; } if (rp == NULL) { panic("dispdeq: thread not on queue"); } DTRACE_SCHED2(dequeue, kthread_t *, tp, disp_t *, dp); /* * Found it so remove it from queue. */ if ((*ptp = rp->t_link) == NULL) dq->dq_last = trp; dp->disp_nrunnable--; if (--dq->dq_sruncnt == 0) { dp->disp_qactmap[tpri >> BT_ULSHIFT] &= ~BT_BIW(tpri); if (dp->disp_nrunnable == 0) { dp->disp_max_unbound_pri = -1; dp->disp_maxrunpri = -1; } else if (tpri == dp->disp_maxrunpri) { int ipri; ipri = bt_gethighbit(dp->disp_qactmap, dp->disp_maxrunpri >> BT_ULSHIFT); if (ipri < dp->disp_max_unbound_pri) dp->disp_max_unbound_pri = ipri; dp->disp_maxrunpri = ipri; } } tp->t_link = NULL; THREAD_TRANSITION(tp); /* put in intermediate state */ return (1); } /* * dq_sruninc and dq_srundec are public functions for * incrementing/decrementing the sruncnts when a thread on * a dispatcher queue is made schedulable/unschedulable by * resetting the TS_LOAD flag. * * The caller MUST have the thread lock and therefore the dispatcher * queue lock so that the operation which changes * the flag, the operation that checks the status of the thread to * determine if it's on a disp queue AND the call to this function * are one atomic operation with respect to interrupts. */ /* * Called by sched AFTER TS_LOAD flag is set on a swapped, runnable thread. */ void dq_sruninc(kthread_t *t) { ASSERT(t->t_state == TS_RUN); ASSERT(t->t_schedflag & TS_LOAD); THREAD_TRANSITION(t); setfrontdq(t); } /* * See comment on calling conventions above. * Called by sched BEFORE TS_LOAD flag is cleared on a runnable thread. */ void dq_srundec(kthread_t *t) { ASSERT(t->t_schedflag & TS_LOAD); (void) dispdeq(t); disp_swapped_enq(t); } /* * Change the dispatcher lock of thread to the "swapped_lock" * and return with thread lock still held. * * Called with thread_lock held, in transition state, and at high spl. */ void disp_swapped_enq(kthread_t *tp) { ASSERT(THREAD_LOCK_HELD(tp)); ASSERT(tp->t_schedflag & TS_LOAD); switch (tp->t_state) { case TS_RUN: disp_lock_enter_high(&swapped_lock); THREAD_SWAP(tp, &swapped_lock); /* set TS_RUN state and lock */ break; case TS_ONPROC: disp_lock_enter_high(&swapped_lock); THREAD_TRANSITION(tp); wake_sched_sec = 1; /* tell clock to wake sched */ THREAD_SWAP(tp, &swapped_lock); /* set TS_RUN state and lock */ break; default: panic("disp_swapped: tp: %p bad t_state", (void *)tp); } } /* * This routine is called by setbackdq/setfrontdq if the thread is * not loaded or loaded and on the swap queue. * * Thread state TS_SLEEP implies that a swapped thread * has been woken up and needs to be swapped in by the swapper. * * Thread state TS_RUN, it implies that the priority of a swapped * thread is being increased by scheduling class (e.g. ts_update). */ static void disp_swapped_setrun(kthread_t *tp) { ASSERT(THREAD_LOCK_HELD(tp)); ASSERT((tp->t_schedflag & (TS_LOAD | TS_ON_SWAPQ)) != TS_LOAD); switch (tp->t_state) { case TS_SLEEP: disp_lock_enter_high(&swapped_lock); /* * Wakeup sched immediately (i.e., next tick) if the * thread priority is above maxclsyspri. */ if (DISP_PRIO(tp) > maxclsyspri) wake_sched = 1; else wake_sched_sec = 1; THREAD_RUN(tp, &swapped_lock); /* set TS_RUN state and lock */ break; case TS_RUN: /* called from ts_update */ break; default: panic("disp_swapped_setrun: tp: %p bad t_state", (void *)tp); } } /* * Make a thread give up its processor. Find the processor on * which this thread is executing, and have that processor * preempt. * * We allow System Duty Cycle (SDC) threads to be preempted even if * they are running at kernel priorities. To implement this, we always * set cpu_kprunrun; this ensures preempt() will be called. Since SDC * calls cpu_surrender() very often, we only preempt if there is anyone * competing with us. */ void cpu_surrender(kthread_t *tp) { cpu_t *cpup; int max_pri; int max_run_pri; klwp_t *lwp; ASSERT(THREAD_LOCK_HELD(tp)); if (tp->t_state != TS_ONPROC) return; cpup = tp->t_disp_queue->disp_cpu; /* CPU thread dispatched to */ max_pri = cpup->cpu_disp->disp_maxrunpri; /* best pri of that CPU */ max_run_pri = CP_MAXRUNPRI(cpup->cpu_part); if (max_pri < max_run_pri) max_pri = max_run_pri; if (tp->t_cid == sysdccid) { uint_t t_pri = DISP_PRIO(tp); if (t_pri > max_pri) return; /* we are not competing w/ anyone */ cpup->cpu_runrun = cpup->cpu_kprunrun = 1; } else { cpup->cpu_runrun = 1; if (max_pri >= kpreemptpri && cpup->cpu_kprunrun == 0) { cpup->cpu_kprunrun = 1; } } /* * Propagate cpu_runrun, and cpu_kprunrun to global visibility. */ membar_enter(); DTRACE_SCHED1(surrender, kthread_t *, tp); /* * Make the target thread take an excursion through trap() * to do preempt() (unless we're already in trap or post_syscall, * calling cpu_surrender via CL_TRAPRET). */ if (tp != curthread || (lwp = tp->t_lwp) == NULL || lwp->lwp_state != LWP_USER) { aston(tp); if (cpup != CPU) poke_cpu(cpup->cpu_id); } TRACE_2(TR_FAC_DISP, TR_CPU_SURRENDER, "cpu_surrender:tid %p cpu %p", tp, cpup); } /* * Commit to and ratify a scheduling decision */ /*ARGSUSED*/ static kthread_t * disp_ratify(kthread_t *tp, disp_t *kpq) { pri_t tpri, maxpri; pri_t maxkpri; cpu_t *cpup; ASSERT(tp != NULL); /* * Commit to, then ratify scheduling decision */ cpup = CPU; if (cpup->cpu_runrun != 0) cpup->cpu_runrun = 0; if (cpup->cpu_kprunrun != 0) cpup->cpu_kprunrun = 0; if (cpup->cpu_chosen_level != -1) cpup->cpu_chosen_level = -1; membar_enter(); tpri = DISP_PRIO(tp); maxpri = cpup->cpu_disp->disp_maxrunpri; maxkpri = kpq->disp_maxrunpri; if (maxpri < maxkpri) maxpri = maxkpri; if (tpri < maxpri) { /* * should have done better * put this one back and indicate to try again */ cpup->cpu_dispthread = curthread; /* fixup dispthread */ cpup->cpu_dispatch_pri = DISP_PRIO(curthread); thread_lock_high(tp); THREAD_TRANSITION(tp); setfrontdq(tp); thread_unlock_nopreempt(tp); tp = NULL; } return (tp); } /* * See if there is any work on the dispatcher queue for other CPUs. * If there is, dequeue the best thread and return. */ static kthread_t * disp_getwork(cpu_t *cp) { cpu_t *ocp; /* other CPU */ cpu_t *ocp_start; cpu_t *tcp; /* target local CPU */ kthread_t *tp; kthread_t *retval = NULL; pri_t maxpri; disp_t *kpq; /* kp queue for this partition */ lpl_t *lpl, *lpl_leaf; int leafidx, startidx; hrtime_t stealtime; lgrp_id_t local_id; maxpri = -1; tcp = NULL; kpq = &cp->cpu_part->cp_kp_queue; while (kpq->disp_maxrunpri >= 0) { /* * Try to take a thread from the kp_queue. */ tp = (disp_getbest(kpq)); if (tp) return (disp_ratify(tp, kpq)); } kpreempt_disable(); /* protect the cpu_active list */ /* * Try to find something to do on another CPU's run queue. * Loop through all other CPUs looking for the one with the highest * priority unbound thread. * * On NUMA machines, the partition's CPUs are consulted in order of * distance from the current CPU. This way, the first available * work found is also the closest, and will suffer the least * from being migrated. */ lpl = lpl_leaf = cp->cpu_lpl; local_id = lpl_leaf->lpl_lgrpid; leafidx = startidx = 0; /* * This loop traverses the lpl hierarchy. Higher level lpls represent * broader levels of locality */ do { /* This loop iterates over the lpl's leaves */ do { if (lpl_leaf != cp->cpu_lpl) ocp = lpl_leaf->lpl_cpus; else ocp = cp->cpu_next_lpl; /* This loop iterates over the CPUs in the leaf */ ocp_start = ocp; do { pri_t pri; ASSERT(CPU_ACTIVE(ocp)); /* * End our stroll around this lpl if: * * - Something became runnable on the local * queue...which also ends our stroll around * the partition. * * - We happen across another idle CPU. * Since it is patrolling the next portion * of the lpl's list (assuming it's not * halted, or busy servicing an interrupt), * move to the next higher level of locality. */ if (cp->cpu_disp->disp_nrunnable != 0) { kpreempt_enable(); return (NULL); } if (ocp->cpu_dispatch_pri == -1) { if (ocp->cpu_disp_flags & CPU_DISP_HALTED || ocp->cpu_intr_actv != 0) continue; else goto next_level; } /* * If there's only one thread and the CPU * is in the middle of a context switch, * or it's currently running the idle thread, * don't steal it. */ if ((ocp->cpu_disp_flags & CPU_DISP_DONTSTEAL) && ocp->cpu_disp->disp_nrunnable == 1) continue; pri = ocp->cpu_disp->disp_max_unbound_pri; if (pri > maxpri) { /* * Don't steal threads that we attempted * to steal recently until they're ready * to be stolen again. */ stealtime = ocp->cpu_disp->disp_steal; if (stealtime == 0 || stealtime - gethrtime() <= 0) { maxpri = pri; tcp = ocp; } else { /* * Don't update tcp, just set * the retval to T_DONTSTEAL, so * that if no acceptable CPUs * are found the return value * will be T_DONTSTEAL rather * then NULL. */ retval = T_DONTSTEAL; } } } while ((ocp = ocp->cpu_next_lpl) != ocp_start); /* * Iterate to the next leaf lpl in the resource set * at this level of locality. If we hit the end of * the set, wrap back around to the beginning. * * Note: This iteration is NULL terminated for a reason * see lpl_topo_bootstrap() in lgrp.c for details. */ if ((lpl_leaf = lpl->lpl_rset[++leafidx]) == NULL) { leafidx = 0; lpl_leaf = lpl->lpl_rset[leafidx]; } } while (leafidx != startidx); next_level: /* * Expand the search to include farther away CPUs (next * locality level). The closer CPUs that have already been * checked will be checked again. In doing so, idle CPUs * will tend to be more aggresive about stealing from CPUs * that are closer (since the closer CPUs will be considered * more often). * Begin at this level with the CPUs local leaf lpl. */ if ((lpl = lpl->lpl_parent) != NULL) { leafidx = startidx = lpl->lpl_id2rset[local_id]; lpl_leaf = lpl->lpl_rset[leafidx]; } } while (!tcp && lpl); kpreempt_enable(); /* * If another queue looks good, and there is still nothing on * the local queue, try to transfer one or more threads * from it to our queue. */ if (tcp && cp->cpu_disp->disp_nrunnable == 0) { tp = disp_getbest(tcp->cpu_disp); if (tp == NULL || tp == T_DONTSTEAL) return (tp); return (disp_ratify(tp, kpq)); } return (retval); } /* * disp_fix_unbound_pri() * Determines the maximum priority of unbound threads on the queue. * The priority is kept for the queue, but is only increased, never * reduced unless some CPU is looking for something on that queue. * * The priority argument is the known upper limit. * * Perhaps this should be kept accurately, but that probably means * separate bitmaps for bound and unbound threads. Since only idled * CPUs will have to do this recalculation, it seems better this way. */ static void disp_fix_unbound_pri(disp_t *dp, pri_t pri) { kthread_t *tp; dispq_t *dq; ulong_t *dqactmap = dp->disp_qactmap; ulong_t mapword; int wx; ASSERT(DISP_LOCK_HELD(&dp->disp_lock)); ASSERT(pri >= 0); /* checked by caller */ /* * Start the search at the next lowest priority below the supplied * priority. This depends on the bitmap implementation. */ do { wx = pri >> BT_ULSHIFT; /* index of word in map */ /* * Form mask for all lower priorities in the word. */ mapword = dqactmap[wx] & (BT_BIW(pri) - 1); /* * Get next lower active priority. */ if (mapword != 0) { pri = (wx << BT_ULSHIFT) + highbit(mapword) - 1; } else if (wx > 0) { pri = bt_gethighbit(dqactmap, wx - 1); /* sign extend */ if (pri < 0) break; } else { pri = -1; break; } /* * Search the queue for unbound, runnable threads. */ dq = &dp->disp_q[pri]; tp = dq->dq_first; while (tp && (tp->t_bound_cpu || tp->t_weakbound_cpu)) { tp = tp->t_link; } /* * If a thread was found, set the priority and return. */ } while (tp == NULL); /* * pri holds the maximum unbound thread priority or -1. */ if (dp->disp_max_unbound_pri != pri) dp->disp_max_unbound_pri = pri; } /* * disp_adjust_unbound_pri() - thread is becoming unbound, so we should * check if the CPU to which is was previously bound should have * its disp_max_unbound_pri increased. */ void disp_adjust_unbound_pri(kthread_t *tp) { disp_t *dp; pri_t tpri; ASSERT(THREAD_LOCK_HELD(tp)); /* * Don't do anything if the thread is not bound, or * currently not runnable or swapped out. */ if (tp->t_bound_cpu == NULL || tp->t_state != TS_RUN || tp->t_schedflag & TS_ON_SWAPQ) return; tpri = DISP_PRIO(tp); dp = tp->t_bound_cpu->cpu_disp; ASSERT(tpri >= 0 && tpri < dp->disp_npri); if (tpri > dp->disp_max_unbound_pri) dp->disp_max_unbound_pri = tpri; } /* * disp_getbest() * De-queue the highest priority unbound runnable thread. * Returns with the thread unlocked and onproc but at splhigh (like disp()). * Returns NULL if nothing found. * Returns T_DONTSTEAL if the thread was not stealable. * so that the caller will try again later. * * Passed a pointer to a dispatch queue not associated with this CPU, and * its type. */ static kthread_t * disp_getbest(disp_t *dp) { kthread_t *tp; dispq_t *dq; pri_t pri; cpu_t *cp, *tcp; boolean_t allbound; disp_lock_enter(&dp->disp_lock); /* * If there is nothing to run, or the CPU is in the middle of a * context switch of the only thread, return NULL. */ tcp = dp->disp_cpu; cp = CPU; pri = dp->disp_max_unbound_pri; if (pri == -1 || (tcp != NULL && (tcp->cpu_disp_flags & CPU_DISP_DONTSTEAL) && tcp->cpu_disp->disp_nrunnable == 1)) { disp_lock_exit_nopreempt(&dp->disp_lock); return (NULL); } dq = &dp->disp_q[pri]; /* * Assume that all threads are bound on this queue, and change it * later when we find out that it is not the case. */ allbound = B_TRUE; for (tp = dq->dq_first; tp != NULL; tp = tp->t_link) { hrtime_t now, nosteal, rqtime; /* * Skip over bound threads which could be here even * though disp_max_unbound_pri indicated this level. */ if (tp->t_bound_cpu || tp->t_weakbound_cpu) continue; /* * We've got some unbound threads on this queue, so turn * the allbound flag off now. */ allbound = B_FALSE; /* * The thread is a candidate for stealing from its run queue. We * don't want to steal threads that became runnable just a * moment ago. This improves CPU affinity for threads that get * preempted for short periods of time and go back on the run * queue. * * We want to let it stay on its run queue if it was only placed * there recently and it was running on the same CPU before that * to preserve its cache investment. For the thread to remain on * its run queue, ALL of the following conditions must be * satisfied: * * - the disp queue should not be the kernel preemption queue * - delayed idle stealing should not be disabled * - nosteal_nsec should be non-zero * - it should run with user priority * - it should be on the run queue of the CPU where it was * running before being placed on the run queue * - it should be the only thread on the run queue (to prevent * extra scheduling latency for other threads) * - it should sit on the run queue for less than per-chip * nosteal interval or global nosteal interval * - in case of CPUs with shared cache it should sit in a run * queue of a CPU from a different chip * * The checks are arranged so that the ones that are faster are * placed earlier. */ if (tcp == NULL || pri >= minclsyspri || tp->t_cpu != tcp) break; /* * Steal immediately if, due to CMT processor architecture * migraiton between cp and tcp would incur no performance * penalty. */ if (pg_cmt_can_migrate(cp, tcp)) break; nosteal = nosteal_nsec; if (nosteal == 0) break; /* * Calculate time spent sitting on run queue */ now = gethrtime_unscaled(); rqtime = now - tp->t_waitrq; scalehrtime(&rqtime); /* * Steal immediately if the time spent on this run queue is more * than allowed nosteal delay. * * Negative rqtime check is needed here to avoid infinite * stealing delays caused by unlikely but not impossible * drifts between CPU times on different CPUs. */ if (rqtime > nosteal || rqtime < 0) break; DTRACE_PROBE4(nosteal, kthread_t *, tp, cpu_t *, tcp, cpu_t *, cp, hrtime_t, rqtime); scalehrtime(&now); /* * Calculate when this thread becomes stealable */ now += (nosteal - rqtime); /* * Calculate time when some thread becomes stealable */ if (now < dp->disp_steal) dp->disp_steal = now; } /* * If there were no unbound threads on this queue, find the queue * where they are and then return later. The value of * disp_max_unbound_pri is not always accurate because it isn't * reduced until another idle CPU looks for work. */ if (allbound) disp_fix_unbound_pri(dp, pri); /* * If we reached the end of the queue and found no unbound threads * then return NULL so that other CPUs will be considered. If there * are unbound threads but they cannot yet be stolen, then * return T_DONTSTEAL and try again later. */ if (tp == NULL) { disp_lock_exit_nopreempt(&dp->disp_lock); return (allbound ? NULL : T_DONTSTEAL); } /* * Found a runnable, unbound thread, so remove it from queue. * dispdeq() requires that we have the thread locked, and we do, * by virtue of holding the dispatch queue lock. dispdeq() will * put the thread in transition state, thereby dropping the dispq * lock. */ #ifdef DEBUG { int thread_was_on_queue; thread_was_on_queue = dispdeq(tp); /* drops disp_lock */ ASSERT(thread_was_on_queue); } #else /* DEBUG */ (void) dispdeq(tp); /* drops disp_lock */ #endif /* DEBUG */ /* * Reset the disp_queue steal time - we do not know what is the smallest * value across the queue is. */ dp->disp_steal = 0; tp->t_schedflag |= TS_DONT_SWAP; /* * Setup thread to run on the current CPU. */ tp->t_disp_queue = cp->cpu_disp; cp->cpu_dispthread = tp; /* protected by spl only */ cp->cpu_dispatch_pri = pri; /* * There can be a memory synchronization race between disp_getbest() * and disp_ratify() vs cpu_resched() where cpu_resched() is trying * to preempt the current thread to run the enqueued thread while * disp_getbest() and disp_ratify() are changing the current thread * to the stolen thread. This may lead to a situation where * cpu_resched() tries to preempt the wrong thread and the * stolen thread continues to run on the CPU which has been tagged * for preemption. * Later the clock thread gets enqueued but doesn't get to run on the * CPU causing the system to hang. * * To avoid this, grabbing and dropping the disp_lock (which does * a memory barrier) is needed to synchronize the execution of * cpu_resched() with disp_getbest() and disp_ratify() and * synchronize the memory read and written by cpu_resched(), * disp_getbest(), and disp_ratify() with each other. * (see CR#6482861 for more details). */ disp_lock_enter_high(&cp->cpu_disp->disp_lock); disp_lock_exit_high(&cp->cpu_disp->disp_lock); ASSERT(pri == DISP_PRIO(tp)); DTRACE_PROBE3(steal, kthread_t *, tp, cpu_t *, tcp, cpu_t *, cp); thread_onproc(tp, cp); /* set t_state to TS_ONPROC */ /* * Return with spl high so that swtch() won't need to raise it. * The disp_lock was dropped by dispdeq(). */ return (tp); } /* * disp_bound_common() - common routine for higher level functions * that check for bound threads under certain conditions. * If 'threadlistsafe' is set then there is no need to acquire * pidlock to stop the thread list from changing (eg, if * disp_bound_* is called with cpus paused). */ static int disp_bound_common(cpu_t *cp, int threadlistsafe, int flag) { int found = 0; kthread_t *tp; ASSERT(flag); if (!threadlistsafe) mutex_enter(&pidlock); tp = curthread; /* faster than allthreads */ do { if (tp->t_state != TS_FREE) { /* * If an interrupt thread is busy, but the * caller doesn't care (i.e. BOUND_INTR is off), * then just ignore it and continue through. */ if ((tp->t_flag & T_INTR_THREAD) && !(flag & BOUND_INTR)) continue; /* * Skip the idle thread for the CPU * we're about to set offline. */ if (tp == cp->cpu_idle_thread) continue; /* * Skip the pause thread for the CPU * we're about to set offline. */ if (tp == cp->cpu_pause_thread) continue; if ((flag & BOUND_CPU) && (tp->t_bound_cpu == cp || tp->t_bind_cpu == cp->cpu_id || tp->t_weakbound_cpu == cp)) { found = 1; break; } if ((flag & BOUND_PARTITION) && (tp->t_cpupart == cp->cpu_part)) { found = 1; break; } } } while ((tp = tp->t_next) != curthread && found == 0); if (!threadlistsafe) mutex_exit(&pidlock); return (found); } /* * disp_bound_threads - return nonzero if threads are bound to the processor. * Called infrequently. Keep this simple. * Includes threads that are asleep or stopped but not onproc. */ int disp_bound_threads(cpu_t *cp, int threadlistsafe) { return (disp_bound_common(cp, threadlistsafe, BOUND_CPU)); } /* * disp_bound_anythreads - return nonzero if _any_ threads are bound * to the given processor, including interrupt threads. */ int disp_bound_anythreads(cpu_t *cp, int threadlistsafe) { return (disp_bound_common(cp, threadlistsafe, BOUND_CPU | BOUND_INTR)); } /* * disp_bound_partition - return nonzero if threads are bound to the same * partition as the processor. * Called infrequently. Keep this simple. * Includes threads that are asleep or stopped but not onproc. */ int disp_bound_partition(cpu_t *cp, int threadlistsafe) { return (disp_bound_common(cp, threadlistsafe, BOUND_PARTITION)); } /* * disp_cpu_inactive - make a CPU inactive by moving all of its unbound * threads to other CPUs. */ void disp_cpu_inactive(cpu_t *cp) { kthread_t *tp; disp_t *dp = cp->cpu_disp; dispq_t *dq; pri_t pri; int wasonq; disp_lock_enter(&dp->disp_lock); while ((pri = dp->disp_max_unbound_pri) != -1) { dq = &dp->disp_q[pri]; tp = dq->dq_first; /* * Skip over bound threads. */ while (tp != NULL && tp->t_bound_cpu != NULL) { tp = tp->t_link; } if (tp == NULL) { /* disp_max_unbound_pri must be inaccurate, so fix it */ disp_fix_unbound_pri(dp, pri); continue; } wasonq = dispdeq(tp); /* drops disp_lock */ ASSERT(wasonq); ASSERT(tp->t_weakbound_cpu == NULL); setbackdq(tp); /* * Called from cpu_offline: * * cp has already been removed from the list of active cpus * and tp->t_cpu has been changed so there is no risk of * tp ending up back on cp. * * Called from cpupart_move_cpu: * * The cpu has moved to a new cpupart. Any threads that * were on it's dispatch queues before the move remain * in the old partition and can't run in the new partition. */ ASSERT(tp->t_cpu != cp); thread_unlock(tp); disp_lock_enter(&dp->disp_lock); } disp_lock_exit(&dp->disp_lock); } /* * disp_lowpri_cpu - find CPU running the lowest priority thread. * The hint passed in is used as a starting point so we don't favor * CPU 0 or any other CPU. The caller should pass in the most recently * used CPU for the thread. * * The lgroup and priority are used to determine the best CPU to run on * in a NUMA machine. The lgroup specifies which CPUs are closest while * the thread priority will indicate whether the thread will actually run * there. To pick the best CPU, the CPUs inside and outside of the given * lgroup which are running the lowest priority threads are found. The * remote CPU is chosen only if the thread will not run locally on a CPU * within the lgroup, but will run on the remote CPU. If the thread * cannot immediately run on any CPU, the best local CPU will be chosen. * * The lpl specified also identifies the cpu partition from which * disp_lowpri_cpu should select a CPU. * * curcpu is used to indicate that disp_lowpri_cpu is being called on * behalf of the current thread. (curthread is looking for a new cpu) * In this case, cpu_dispatch_pri for this thread's cpu should be * ignored. * * If a cpu is the target of an offline request then try to avoid it. * * This function must be called at either high SPL, or with preemption * disabled, so that the "hint" CPU cannot be removed from the online * CPU list while we are traversing it. */ cpu_t * disp_lowpri_cpu(cpu_t *hint, lpl_t *lpl, pri_t tpri, cpu_t *curcpu) { cpu_t *bestcpu; cpu_t *besthomecpu; cpu_t *cp, *cpstart; pri_t bestpri; pri_t cpupri; klgrpset_t done; klgrpset_t cur_set; lpl_t *lpl_iter, *lpl_leaf; int i; /* * Scan for a CPU currently running the lowest priority thread. * Cannot get cpu_lock here because it is adaptive. * We do not require lock on CPU list. */ ASSERT(hint != NULL); ASSERT(lpl != NULL); ASSERT(lpl->lpl_ncpu > 0); /* * First examine local CPUs. Note that it's possible the hint CPU * passed in in remote to the specified home lgroup. If our priority * isn't sufficient enough such that we can run immediately at home, * then examine CPUs remote to our home lgroup. * We would like to give preference to CPUs closest to "home". * If we can't find a CPU where we'll run at a given level * of locality, we expand our search to include the next level. */ bestcpu = besthomecpu = NULL; klgrpset_clear(done); /* start with lpl we were passed */ lpl_iter = lpl; do { bestpri = SHRT_MAX; klgrpset_clear(cur_set); for (i = 0; i < lpl_iter->lpl_nrset; i++) { lpl_leaf = lpl_iter->lpl_rset[i]; if (klgrpset_ismember(done, lpl_leaf->lpl_lgrpid)) continue; klgrpset_add(cur_set, lpl_leaf->lpl_lgrpid); if (hint->cpu_lpl == lpl_leaf) cp = cpstart = hint; else cp = cpstart = lpl_leaf->lpl_cpus; do { if (cp == curcpu) cpupri = -1; else if (cp == cpu_inmotion) cpupri = SHRT_MAX; else cpupri = cp->cpu_dispatch_pri; if (cp->cpu_disp->disp_maxrunpri > cpupri) cpupri = cp->cpu_disp->disp_maxrunpri; if (cp->cpu_chosen_level > cpupri) cpupri = cp->cpu_chosen_level; if (cpupri < bestpri) { if (CPU_IDLING(cpupri)) { ASSERT((cp->cpu_flags & CPU_QUIESCED) == 0); return (cp); } bestcpu = cp; bestpri = cpupri; } } while ((cp = cp->cpu_next_lpl) != cpstart); } if (bestcpu && (tpri > bestpri)) { ASSERT((bestcpu->cpu_flags & CPU_QUIESCED) == 0); return (bestcpu); } if (besthomecpu == NULL) besthomecpu = bestcpu; /* * Add the lgrps we just considered to the "done" set */ klgrpset_or(done, cur_set); } while ((lpl_iter = lpl_iter->lpl_parent) != NULL); /* * The specified priority isn't high enough to run immediately * anywhere, so just return the best CPU from the home lgroup. */ ASSERT((besthomecpu->cpu_flags & CPU_QUIESCED) == 0); return (besthomecpu); } /* * This routine provides the generic idle cpu function for all processors. * If a processor has some specific code to execute when idle (say, to stop * the pipeline and save power) then that routine should be defined in the * processors specific code (module_xx.c) and the global variable idle_cpu * set to that function. */ static void generic_idle_cpu(void) { } /*ARGSUSED*/ static void generic_enq_thread(cpu_t *cpu, int bound) { }