/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License, Version 1.0 only * (the "License"). You may not use this file except in compliance * with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2005 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * Calling pool_lock() protects the pools configuration, which includes * CPU partitions. cpu_lock protects the CPU partition list, and prevents * partitions from being created or destroyed while the lock is held. * The lock ordering with respect to related locks is: * * pool_lock() ---> cpu_lock ---> pidlock --> p_lock * * Blocking memory allocations may be made while holding "pool_lock" * or cpu_lock. */ /* * The cp_default partition is allocated statically, but its lgroup load average * (lpl) list is allocated dynamically after kmem subsystem is initialized. This * saves some memory since the space allocated reflects the actual number of * lgroups supported by the platform. The lgrp facility provides a temporary * space to hold lpl information during system bootstrap. */ cpupart_t *cp_list_head; cpupart_t cp_default; static cpupartid_t cp_id_next; uint_t cp_numparts; uint_t cp_numparts_nonempty; /* * Need to limit total number of partitions to avoid slowing down the * clock code too much. The clock code traverses the list of * partitions and needs to be able to execute in a reasonable amount * of time (less than 1/hz seconds). The maximum is sized based on * max_ncpus so it shouldn't be a problem unless there are large * numbers of empty partitions. */ static uint_t cp_max_numparts; /* * Processor sets and CPU partitions are different but related concepts. * A processor set is a user-level abstraction allowing users to create * sets of CPUs and bind threads exclusively to those sets. A CPU * partition is a kernel dispatcher object consisting of a set of CPUs * and a global dispatch queue. The processor set abstraction is * implemented via a CPU partition, and currently there is a 1-1 * mapping between processor sets and partitions (excluding the default * partition, which is not visible as a processor set). Hence, the * numbering for processor sets and CPU partitions is identical. This * may not always be true in the future, and these macros could become * less trivial if we support e.g. a processor set containing multiple * CPU partitions. */ #define PSTOCP(psid) ((cpupartid_t)((psid) == PS_NONE ? CP_DEFAULT : (psid))) #define CPTOPS(cpid) ((psetid_t)((cpid) == CP_DEFAULT ? PS_NONE : (cpid))) /* * Find a CPU partition given a processor set ID. */ static cpupart_t * cpupart_find_all(psetid_t psid) { cpupart_t *cp; cpupartid_t cpid = PSTOCP(psid); ASSERT(MUTEX_HELD(&cpu_lock)); /* default partition not visible as a processor set */ if (psid == CP_DEFAULT) return (NULL); if (psid == PS_MYID) return (curthread->t_cpupart); cp = cp_list_head; do { if (cp->cp_id == cpid) return (cp); cp = cp->cp_next; } while (cp != cp_list_head); return (NULL); } /* * Find a CPU partition given a processor set ID if the processor set * should be visible from the calling zone. */ cpupart_t * cpupart_find(psetid_t psid) { cpupart_t *cp; ASSERT(MUTEX_HELD(&cpu_lock)); cp = cpupart_find_all(psid); if (cp != NULL && !INGLOBALZONE(curproc) && pool_pset_enabled() && zone_pset_get(curproc->p_zone) != CPTOPS(cp->cp_id)) return (NULL); return (cp); } static int cpupart_kstat_update(kstat_t *ksp, int rw) { cpupart_t *cp = (cpupart_t *)ksp->ks_private; cpupart_kstat_t *cpksp = ksp->ks_data; if (rw == KSTAT_WRITE) return (EACCES); cpksp->cpk_updates.value.ui64 = cp->cp_updates; cpksp->cpk_runnable.value.ui64 = cp->cp_nrunnable_cum; cpksp->cpk_waiting.value.ui64 = cp->cp_nwaiting_cum; cpksp->cpk_ncpus.value.ui32 = cp->cp_ncpus; cpksp->cpk_avenrun_1min.value.ui32 = cp->cp_hp_avenrun[0] >> (16 - FSHIFT); cpksp->cpk_avenrun_5min.value.ui32 = cp->cp_hp_avenrun[1] >> (16 - FSHIFT); cpksp->cpk_avenrun_15min.value.ui32 = cp->cp_hp_avenrun[2] >> (16 - FSHIFT); return (0); } static void cpupart_kstat_create(cpupart_t *cp) { kstat_t *ksp; zoneid_t zoneid; ASSERT(MUTEX_HELD(&cpu_lock)); /* * We have a bit of a chicken-egg problem since this code will * get called to create the kstats for CP_DEFAULT before the * pools framework gets initialized. We circumvent the problem * by special-casing cp_default. */ if (cp != &cp_default && pool_pset_enabled()) zoneid = GLOBAL_ZONEID; else zoneid = ALL_ZONES; ksp = kstat_create_zone("unix", cp->cp_id, "pset", "misc", KSTAT_TYPE_NAMED, sizeof (cpupart_kstat_t) / sizeof (kstat_named_t), 0, zoneid); if (ksp != NULL) { cpupart_kstat_t *cpksp = ksp->ks_data; kstat_named_init(&cpksp->cpk_updates, "updates", KSTAT_DATA_UINT64); kstat_named_init(&cpksp->cpk_runnable, "runnable", KSTAT_DATA_UINT64); kstat_named_init(&cpksp->cpk_waiting, "waiting", KSTAT_DATA_UINT64); kstat_named_init(&cpksp->cpk_ncpus, "ncpus", KSTAT_DATA_UINT32); kstat_named_init(&cpksp->cpk_avenrun_1min, "avenrun_1min", KSTAT_DATA_UINT32); kstat_named_init(&cpksp->cpk_avenrun_5min, "avenrun_5min", KSTAT_DATA_UINT32); kstat_named_init(&cpksp->cpk_avenrun_15min, "avenrun_15min", KSTAT_DATA_UINT32); ksp->ks_update = cpupart_kstat_update; ksp->ks_private = cp; kstat_install(ksp); } cp->cp_kstat = ksp; } /* * Initialize the default partition and kpreempt disp queue. */ void cpupart_initialize_default(void) { lgrp_id_t i; cp_list_head = &cp_default; cp_default.cp_next = &cp_default; cp_default.cp_prev = &cp_default; cp_default.cp_id = CP_DEFAULT; cp_default.cp_kp_queue.disp_maxrunpri = -1; cp_default.cp_kp_queue.disp_max_unbound_pri = -1; cp_default.cp_kp_queue.disp_cpu = NULL; cp_default.cp_gen = 0; cp_default.cp_loadavg.lg_cur = 0; cp_default.cp_loadavg.lg_len = 0; cp_default.cp_loadavg.lg_total = 0; for (i = 0; i < S_LOADAVG_SZ; i++) { cp_default.cp_loadavg.lg_loads[i] = 0; } CPUSET_ZERO(cp_default.cp_haltset); DISP_LOCK_INIT(&cp_default.cp_kp_queue.disp_lock); cp_id_next = CP_DEFAULT + 1; cpupart_kstat_create(&cp_default); cp_numparts = 1; if (cp_max_numparts == 0) /* allow for /etc/system tuning */ cp_max_numparts = max_ncpus * 2 + 1; /* * Allocate space for cp_default list of lgrploads */ cp_default.cp_nlgrploads = lgrp_plat_max_lgrps(); cp_default.cp_lgrploads = kmem_zalloc(sizeof (lpl_t) * cp_default.cp_nlgrploads, KM_SLEEP); /* * The initial lpl topology is created in a special lpl list * lpl_bootstrap. It should be copied to cp_default. * NOTE: lpl_topo_bootstrap() also updates CPU0 cpu_lpl pointer to point * to the correct lpl in the cp_default.cp_lgrploads list. */ lpl_topo_bootstrap(cp_default.cp_lgrploads, cp_default.cp_nlgrploads); for (i = 0; i < cp_default.cp_nlgrploads; i++) { cp_default.cp_lgrploads[i].lpl_lgrpid = i; } cp_default.cp_attr = PSET_NOESCAPE; cp_numparts_nonempty = 1; /* * Set t0's home */ t0.t_lpl = &cp_default.cp_lgrploads[LGRP_ROOTID]; } static int cpupart_move_cpu(cpu_t *cp, cpupart_t *newpp, int forced) { cpupart_t *oldpp; cpu_t *ncp, *newlist; kthread_t *t; int move_threads = 1; lgrp_id_t lgrpid; proc_t *p; int lgrp_diff_lpl; lpl_t *cpu_lpl; int ret; ASSERT(MUTEX_HELD(&cpu_lock)); ASSERT(newpp != NULL); oldpp = cp->cpu_part; ASSERT(oldpp != NULL); ASSERT(oldpp->cp_ncpus > 0); if (newpp == oldpp) { /* * Don't need to do anything. */ return (0); } cpu_state_change_notify(cp->cpu_id, CPU_CPUPART_OUT); if (!disp_bound_partition(cp, 0)) { /* * Don't need to move threads if there are no threads in * the partition. Note that threads can't enter the * partition while we're holding cpu_lock. */ move_threads = 0; } else if (oldpp->cp_ncpus == 1) { cpu_state_change_notify(cp->cpu_id, CPU_CPUPART_IN); return (EBUSY); } if (forced && (ret = cpu_unbind(cp->cpu_id)) != 0) { cpu_state_change_notify(cp->cpu_id, CPU_CPUPART_IN); return (ret); } /* * Stop further threads weak binding to this cpu. */ cpu_inmotion = cp; membar_enter(); again: if (move_threads) { int loop_count; /* * Check for threads strong or weak bound to this CPU. */ for (loop_count = 0; disp_bound_threads(cp, 0); loop_count++) { if (loop_count >= 5) { cpu_state_change_notify(cp->cpu_id, CPU_CPUPART_IN); cpu_inmotion = NULL; return (EBUSY); /* some threads still bound */ } delay(1); } } /* * Before we actually start changing data structures, notify * the cyclic subsystem that we want to move this CPU out of its * partition. */ if (!cyclic_move_out(cp)) { /* * This CPU must be the last CPU in a processor set with * a bound cyclic. */ cpu_state_change_notify(cp->cpu_id, CPU_CPUPART_IN); cpu_inmotion = NULL; return (EBUSY); } pause_cpus(cp); if (move_threads) { /* * The thread on cpu before the pause thread may have read * cpu_inmotion before we raised the barrier above. Check * again. */ if (disp_bound_threads(cp, 1)) { start_cpus(); goto again; } } /* * Update the set of chip's being spanned */ chip_cpu_move_part(cp, oldpp, newpp); /* save this cpu's lgroup -- it'll be the same in the new partition */ lgrpid = cp->cpu_lpl->lpl_lgrpid; cpu_lpl = cp->cpu_lpl; /* * let the lgroup framework know cp has left the partition */ lgrp_config(LGRP_CONFIG_CPUPART_DEL, (uintptr_t)cp, lgrpid); /* move out of old partition */ oldpp->cp_ncpus--; if (oldpp->cp_ncpus > 0) { ncp = cp->cpu_prev_part->cpu_next_part = cp->cpu_next_part; cp->cpu_next_part->cpu_prev_part = cp->cpu_prev_part; if (oldpp->cp_cpulist == cp) { oldpp->cp_cpulist = ncp; } } else { ncp = oldpp->cp_cpulist = NULL; cp_numparts_nonempty--; ASSERT(cp_numparts_nonempty != 0); } oldpp->cp_gen++; /* move into new partition */ newlist = newpp->cp_cpulist; if (newlist == NULL) { newpp->cp_cpulist = cp->cpu_next_part = cp->cpu_prev_part = cp; cp_numparts_nonempty++; ASSERT(cp_numparts_nonempty != 0); } else { cp->cpu_next_part = newlist; cp->cpu_prev_part = newlist->cpu_prev_part; newlist->cpu_prev_part->cpu_next_part = cp; newlist->cpu_prev_part = cp; } cp->cpu_part = newpp; newpp->cp_ncpus++; newpp->cp_gen++; ASSERT(CPUSET_ISNULL(newpp->cp_haltset)); ASSERT(CPUSET_ISNULL(oldpp->cp_haltset)); /* * let the lgroup framework know cp has entered the partition */ lgrp_config(LGRP_CONFIG_CPUPART_ADD, (uintptr_t)cp, lgrpid); /* * If necessary, move threads off processor. */ if (move_threads) { ASSERT(ncp != NULL); /* * Walk thru the active process list to look for * threads that need to have a new home lgroup, * or the last CPU they run on is the same CPU * being moved out of the partition. */ for (p = practive; p != NULL; p = p->p_next) { t = p->p_tlist; if (t == NULL) continue; lgrp_diff_lpl = 0; do { ASSERT(t->t_lpl != NULL); /* * Update the count of how many threads are * in this CPU's lgroup but have a different lpl */ if (t->t_lpl != cpu_lpl && t->t_lpl->lpl_lgrpid == lgrpid) lgrp_diff_lpl++; /* * If the lgroup that t is assigned to no * longer has any CPUs in t's partition, * we'll have to choose a new lgroup for t. */ if (!LGRP_CPUS_IN_PART(t->t_lpl->lpl_lgrpid, t->t_cpupart)) { lgrp_move_thread(t, lgrp_choose(t, t->t_cpupart), 0); } /* * make sure lpl points to our own partition */ ASSERT(t->t_lpl >= t->t_cpupart->cp_lgrploads && (t->t_lpl < t->t_cpupart->cp_lgrploads + t->t_cpupart->cp_nlgrploads)); ASSERT(t->t_lpl->lpl_ncpu > 0); /* Update CPU last ran on if it was this CPU */ if (t->t_cpu == cp && t->t_cpupart == oldpp && t->t_bound_cpu != cp) { t->t_cpu = disp_lowpri_cpu(ncp, t->t_lpl, t->t_pri, NULL); } t = t->t_forw; } while (t != p->p_tlist); /* * Didn't find any threads in the same lgroup as this * CPU with a different lpl, so remove the lgroup from * the process lgroup bitmask. */ if (lgrp_diff_lpl) klgrpset_del(p->p_lgrpset, lgrpid); } /* * Walk thread list looking for threads that need to be * rehomed, since there are some threads that are not in * their process's p_tlist. */ t = curthread; do { ASSERT(t != NULL && t->t_lpl != NULL); /* * If the lgroup that t is assigned to no * longer has any CPUs in t's partition, * we'll have to choose a new lgroup for t. * Also, choose best lgroup for home when * thread has specified lgroup affinities, * since there may be an lgroup with more * affinity available after moving CPUs * around. */ if (!LGRP_CPUS_IN_PART(t->t_lpl->lpl_lgrpid, t->t_cpupart) || t->t_lgrp_affinity) { lgrp_move_thread(t, lgrp_choose(t, t->t_cpupart), 1); } /* make sure lpl points to our own partition */ ASSERT((t->t_lpl >= t->t_cpupart->cp_lgrploads) && (t->t_lpl < t->t_cpupart->cp_lgrploads + t->t_cpupart->cp_nlgrploads)); ASSERT(t->t_lpl->lpl_ncpu > 0); /* Update CPU last ran on if it was this CPU */ if (t->t_cpu == cp && t->t_cpupart == oldpp && t->t_bound_cpu != cp) { t->t_cpu = disp_lowpri_cpu(ncp, t->t_lpl, t->t_pri, NULL); } t = t->t_next; } while (t != curthread); /* * Clear off the CPU's run queue, and the kp queue if the * partition is now empty. */ disp_cpu_inactive(cp); /* * Make cp switch to a thread from the new partition. */ cp->cpu_runrun = 1; cp->cpu_kprunrun = 1; } cpu_inmotion = NULL; start_cpus(); /* * Let anyone interested know that cpu has been added to the set. */ cpu_state_change_notify(cp->cpu_id, CPU_CPUPART_IN); /* * Now let the cyclic subsystem know that it can reshuffle cyclics * bound to the new processor set. */ cyclic_move_in(cp); return (0); } /* * Check if thread can be moved to a new cpu partition. Called by * cpupart_move_thread() and pset_bind_start(). */ int cpupart_movable_thread(kthread_id_t tp, cpupart_t *cp, int ignore) { ASSERT(MUTEX_HELD(&cpu_lock)); ASSERT(MUTEX_HELD(&ttoproc(tp)->p_lock)); ASSERT(cp != NULL); ASSERT(THREAD_LOCK_HELD(tp)); /* * CPU-bound threads can't be moved. */ if (!ignore) { cpu_t *boundcpu = tp->t_bound_cpu ? tp->t_bound_cpu : tp->t_weakbound_cpu; if (boundcpu != NULL && boundcpu->cpu_part != cp) return (EBUSY); } return (0); } /* * Move thread to new partition. If ignore is non-zero, then CPU * bindings should be ignored (this is used when destroying a * partition). */ static int cpupart_move_thread(kthread_id_t tp, cpupart_t *newpp, int ignore, void *projbuf, void *zonebuf) { cpupart_t *oldpp = tp->t_cpupart; int ret; ASSERT(MUTEX_HELD(&cpu_lock)); ASSERT(MUTEX_HELD(&pidlock)); ASSERT(MUTEX_HELD(&ttoproc(tp)->p_lock)); ASSERT(newpp != NULL); if (newpp->cp_cpulist == NULL) return (EINVAL); /* * Check for errors first. */ thread_lock(tp); if ((ret = cpupart_movable_thread(tp, newpp, ignore)) != 0) { thread_unlock(tp); return (ret); } /* move the thread */ if (oldpp != newpp) { /* * Make the thread switch to the new partition. */ tp->t_cpupart = newpp; ASSERT(tp->t_lpl != NULL); /* * Leave the thread on the same lgroup if possible; otherwise * choose a new lgroup for it. In either case, update its * t_lpl. */ if (LGRP_CPUS_IN_PART(tp->t_lpl->lpl_lgrpid, newpp) && tp->t_lgrp_affinity == NULL) { /* * The thread's lgroup has CPUs in the thread's new * partition, so the thread can stay assigned to the * same lgroup. Update its t_lpl to point to the * lpl_t for its lgroup in its new partition. */ lgrp_move_thread(tp, &tp->t_cpupart->\ cp_lgrploads[tp->t_lpl->lpl_lgrpid], 1); } else { /* * The thread's lgroup has no cpus in its new * partition or it has specified lgroup affinities, * so choose the best lgroup for the thread and * assign it to that lgroup. */ lgrp_move_thread(tp, lgrp_choose(tp, tp->t_cpupart), 1); } /* * make sure lpl points to our own partition */ ASSERT((tp->t_lpl >= tp->t_cpupart->cp_lgrploads) && (tp->t_lpl < tp->t_cpupart->cp_lgrploads + tp->t_cpupart->cp_nlgrploads)); ASSERT(tp->t_lpl->lpl_ncpu > 0); if (tp->t_state == TS_ONPROC) { cpu_surrender(tp); } else if (tp->t_state == TS_RUN) { (void) dispdeq(tp); setbackdq(tp); } } /* * Our binding has changed; set TP_CHANGEBIND. */ tp->t_proc_flag |= TP_CHANGEBIND; aston(tp); thread_unlock(tp); fss_changepset(tp, newpp, projbuf, zonebuf); return (0); /* success */ } /* * This function binds a thread to a partition. Must be called with the * p_lock of the containing process held (to keep the thread from going * away), and thus also with cpu_lock held (since cpu_lock must be * acquired before p_lock). If ignore is non-zero, then CPU bindings * should be ignored (this is used when destroying a partition). */ int cpupart_bind_thread(kthread_id_t tp, psetid_t psid, int ignore, void *projbuf, void *zonebuf) { cpupart_t *newpp; ASSERT(pool_lock_held()); ASSERT(MUTEX_HELD(&cpu_lock)); ASSERT(MUTEX_HELD(&pidlock)); ASSERT(MUTEX_HELD(&ttoproc(tp)->p_lock)); if (psid == PS_NONE) newpp = &cp_default; else { newpp = cpupart_find(psid); if (newpp == NULL) { return (EINVAL); } } return (cpupart_move_thread(tp, newpp, ignore, projbuf, zonebuf)); } /* * Create a new partition. On MP systems, this also allocates a * kpreempt disp queue for that partition. */ int cpupart_create(psetid_t *psid) { cpupart_t *pp; lgrp_id_t i; ASSERT(pool_lock_held()); pp = kmem_zalloc(sizeof (cpupart_t), KM_SLEEP); pp->cp_nlgrploads = lgrp_plat_max_lgrps(); pp->cp_lgrploads = kmem_zalloc(sizeof (lpl_t) * pp->cp_nlgrploads, KM_SLEEP); mutex_enter(&cpu_lock); if (cp_numparts == cp_max_numparts) { mutex_exit(&cpu_lock); kmem_free(pp->cp_lgrploads, sizeof (lpl_t) * pp->cp_nlgrploads); pp->cp_lgrploads = NULL; kmem_free(pp, sizeof (cpupart_t)); return (ENOMEM); } cp_numparts++; /* find the next free partition ID */ while (cpupart_find(CPTOPS(cp_id_next)) != NULL) cp_id_next++; pp->cp_id = cp_id_next++; pp->cp_ncpus = 0; pp->cp_cpulist = NULL; pp->cp_attr = 0; klgrpset_clear(pp->cp_lgrpset); pp->cp_kp_queue.disp_maxrunpri = -1; pp->cp_kp_queue.disp_max_unbound_pri = -1; pp->cp_kp_queue.disp_cpu = NULL; pp->cp_gen = 0; CPUSET_ZERO(pp->cp_haltset); DISP_LOCK_INIT(&pp->cp_kp_queue.disp_lock); *psid = CPTOPS(pp->cp_id); disp_kp_alloc(&pp->cp_kp_queue, v.v_nglobpris); cpupart_kstat_create(pp); for (i = 0; i < pp->cp_nlgrploads; i++) { pp->cp_lgrploads[i].lpl_lgrpid = i; } CHIP_SET_ZERO(pp->cp_chipset); /* * Pause all CPUs while changing the partition list, to make sure * the clock thread (which traverses the list without holding * cpu_lock) isn't running. */ pause_cpus(NULL); pp->cp_next = cp_list_head; pp->cp_prev = cp_list_head->cp_prev; cp_list_head->cp_prev->cp_next = pp; cp_list_head->cp_prev = pp; start_cpus(); mutex_exit(&cpu_lock); return (0); } /* * Destroy a partition. */ int cpupart_destroy(psetid_t psid) { cpu_t *cp, *first_cp; cpupart_t *pp, *newpp; int err = 0; void *projbuf, *zonebuf; kthread_t *t; proc_t *p; ASSERT(pool_lock_held()); mutex_enter(&cpu_lock); pp = cpupart_find(psid); if (pp == NULL || pp == &cp_default) { mutex_exit(&cpu_lock); return (EINVAL); } /* * Pre-allocate enough buffers for FSS for all active projects and * for all active zones on the system. Unused buffers will be * freed later by fss_freebuf(). */ projbuf = fss_allocbuf(FSS_NPROJ_BUF, FSS_ALLOC_PROJ); zonebuf = fss_allocbuf(FSS_NPROJ_BUF, FSS_ALLOC_ZONE); /* * First need to unbind all the threads currently bound to the * partition. Then do the actual destroy (which moves the CPUs). */ mutex_enter(&pidlock); t = curthread; do { if (t->t_bind_pset == psid) { again: p = ttoproc(t); mutex_enter(&p->p_lock); if (ttoproc(t) != p) { /* * lwp_exit has changed this thread's process * pointer before we grabbed its p_lock. */ mutex_exit(&p->p_lock); goto again; } err = cpupart_bind_thread(t, PS_NONE, 1, projbuf, zonebuf); if (err) { mutex_exit(&p->p_lock); mutex_exit(&pidlock); mutex_exit(&cpu_lock); fss_freebuf(projbuf, FSS_ALLOC_PROJ); fss_freebuf(zonebuf, FSS_ALLOC_ZONE); return (err); } t->t_bind_pset = PS_NONE; mutex_exit(&p->p_lock); } t = t->t_next; } while (t != curthread); mutex_exit(&pidlock); fss_freebuf(projbuf, FSS_ALLOC_PROJ); fss_freebuf(zonebuf, FSS_ALLOC_ZONE); newpp = &cp_default; while ((cp = pp->cp_cpulist) != NULL) { if (err = cpupart_move_cpu(cp, newpp, 0)) { mutex_exit(&cpu_lock); return (err); } } ASSERT(CHIP_SET_ISNULL(pp->cp_chipset)); ASSERT(CPUSET_ISNULL(pp->cp_haltset)); /* * Reset the pointers in any offline processors so they won't * try to rejoin the destroyed partition when they're turned * online. */ first_cp = cp = CPU; do { if (cp->cpu_part == pp) { ASSERT(cp->cpu_flags & CPU_OFFLINE); cp->cpu_part = newpp; } cp = cp->cpu_next; } while (cp != first_cp); /* * Pause all CPUs while changing the partition list, to make sure * the clock thread (which traverses the list without holding * cpu_lock) isn't running. */ pause_cpus(NULL); pp->cp_prev->cp_next = pp->cp_next; pp->cp_next->cp_prev = pp->cp_prev; if (cp_list_head == pp) cp_list_head = pp->cp_next; start_cpus(); if (cp_id_next > pp->cp_id) cp_id_next = pp->cp_id; if (pp->cp_kstat) kstat_delete(pp->cp_kstat); cp_numparts--; disp_kp_free(&pp->cp_kp_queue); kmem_free(pp->cp_lgrploads, sizeof (lpl_t) * pp->cp_nlgrploads); pp->cp_lgrploads = NULL; kmem_free(pp, sizeof (cpupart_t)); mutex_exit(&cpu_lock); return (err); } /* * Return the ID of the partition to which the specified processor belongs. */ psetid_t cpupart_query_cpu(cpu_t *cp) { ASSERT(MUTEX_HELD(&cpu_lock)); return (CPTOPS(cp->cpu_part->cp_id)); } /* * Attach a processor to an existing partition. */ int cpupart_attach_cpu(psetid_t psid, cpu_t *cp, int forced) { cpupart_t *pp; int err; ASSERT(pool_lock_held()); ASSERT(MUTEX_HELD(&cpu_lock)); pp = cpupart_find(psid); if (pp == NULL) return (EINVAL); if (cp->cpu_flags & CPU_OFFLINE) return (EINVAL); err = cpupart_move_cpu(cp, pp, forced); return (err); } /* * Get a list of cpus belonging to the partition. If numcpus is NULL, * this just checks for a valid partition. If numcpus is non-NULL but * cpulist is NULL, the current number of cpus is stored in *numcpus. * If both are non-NULL, the current number of cpus is stored in *numcpus, * and a list of those cpus up to the size originally in *numcpus is * stored in cpulist[]. Also, store the processor set id in *psid. * This is useful in case the processor set id passed in was PS_MYID. */ int cpupart_get_cpus(psetid_t *psid, processorid_t *cpulist, uint_t *numcpus) { cpupart_t *pp; uint_t ncpus; cpu_t *c; int i; mutex_enter(&cpu_lock); pp = cpupart_find(*psid); if (pp == NULL) { mutex_exit(&cpu_lock); return (EINVAL); } *psid = CPTOPS(pp->cp_id); ncpus = pp->cp_ncpus; if (numcpus) { if (ncpus > *numcpus) { /* * Only copy as many cpus as were passed in, but * pass back the real number. */ uint_t t = ncpus; ncpus = *numcpus; *numcpus = t; } else *numcpus = ncpus; if (cpulist) { c = pp->cp_cpulist; for (i = 0; i < ncpus; i++) { ASSERT(c != NULL); cpulist[i] = c->cpu_id; c = c->cpu_next_part; } } } mutex_exit(&cpu_lock); return (0); } /* * Reallocate kpreempt queues for each CPU partition. Called from * disp_setup when a new scheduling class is loaded that increases the * number of priorities in the system. */ void cpupart_kpqalloc(pri_t npri) { cpupart_t *cpp; ASSERT(MUTEX_HELD(&cpu_lock)); cpp = cp_list_head; do { disp_kp_alloc(&cpp->cp_kp_queue, npri); cpp = cpp->cp_next; } while (cpp != cp_list_head); } int cpupart_get_loadavg(psetid_t psid, int *buf, int nelem) { cpupart_t *cp; int i; ASSERT(nelem >= 0); ASSERT(nelem <= LOADAVG_NSTATS); ASSERT(MUTEX_HELD(&cpu_lock)); cp = cpupart_find(psid); if (cp == NULL) return (EINVAL); for (i = 0; i < nelem; i++) buf[i] = cp->cp_hp_avenrun[i] >> (16 - FSHIFT); return (0); } uint_t cpupart_list(psetid_t *list, uint_t nelem, int flag) { uint_t numpart = 0; cpupart_t *cp; ASSERT(MUTEX_HELD(&cpu_lock)); ASSERT(flag == CP_ALL || flag == CP_NONEMPTY); if (list != NULL) { cp = cp_list_head; do { if (((flag == CP_ALL) && (cp != &cp_default)) || ((flag == CP_NONEMPTY) && (cp->cp_ncpus != 0))) { if (numpart == nelem) break; list[numpart++] = CPTOPS(cp->cp_id); } cp = cp->cp_next; } while (cp != cp_list_head); } ASSERT(numpart < cp_numparts); if (flag == CP_ALL) numpart = cp_numparts - 1; /* leave out default partition */ else if (flag == CP_NONEMPTY) numpart = cp_numparts_nonempty; return (numpart); } int cpupart_setattr(psetid_t psid, uint_t attr) { cpupart_t *cp; ASSERT(pool_lock_held()); mutex_enter(&cpu_lock); if ((cp = cpupart_find(psid)) == NULL) { mutex_exit(&cpu_lock); return (EINVAL); } /* * PSET_NOESCAPE attribute for default cpu partition is always set */ if (cp == &cp_default && !(attr & PSET_NOESCAPE)) { mutex_exit(&cpu_lock); return (EINVAL); } cp->cp_attr = attr; mutex_exit(&cpu_lock); return (0); } int cpupart_getattr(psetid_t psid, uint_t *attrp) { cpupart_t *cp; mutex_enter(&cpu_lock); if ((cp = cpupart_find(psid)) == NULL) { mutex_exit(&cpu_lock); return (EINVAL); } *attrp = cp->cp_attr; mutex_exit(&cpu_lock); return (0); }