/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2007 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" /* * NETR SamLogon and SamLogoff RPC client functions. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include extern int netr_open(char *server, char *domain, mlsvc_handle_t *netr_handle); extern int netr_close(mlsvc_handle_t *netr_handle); extern DWORD netlogon_auth(char *server, mlsvc_handle_t *netr_handle, DWORD flags); extern int netr_setup_authenticator(netr_info_t *, struct netr_authenticator *, struct netr_authenticator *); extern DWORD netr_validate_chain(netr_info_t *, struct netr_authenticator *); static DWORD netr_server_samlogon(mlsvc_handle_t *, netr_info_t *, char *, netr_client_t *, smb_userinfo_t *); static void netr_invalidate_chain(void); static void netr_interactive_samlogon(netr_info_t *, netr_client_t *, struct netr_logon_info1 *); static void netr_network_samlogon(netr_info_t *, netr_client_t *, netr_response_t *, netr_response_t *, struct netr_logon_info2 *); static void netr_setup_identity(mlrpc_heap_t *, netr_client_t *, netr_logon_id_t *); /* * Shared with netr_auth.c */ extern netr_info_t netr_global_info; /* * netlogon_logon * * This is the entry point for authenticating a remote logon. The * parameters here all refer to the remote user and workstation, i.e. * the domain is the user's account domain, not our primary domain. * In order to make it easy to track which domain is being used at * each stage, and to reduce the number of things being pushed on the * stack, the client information is bundled up in the clnt structure. * * If the user is successfully authenticated, an access token will be * built and NT_STATUS_SUCCESS will be returned. Otherwise a non-zero * NT status will be returned, in which case the token contents will * be invalid. */ DWORD netlogon_logon(netr_client_t *clnt, smb_userinfo_t *user_info) { char resource_domain[SMB_PI_MAX_DOMAIN]; mlsvc_handle_t netr_handle; smb_ntdomain_t *di; DWORD status; int retries = 0; smb_config_rdlock(); (void) strlcpy(resource_domain, smb_config_getstr(SMB_CI_DOMAIN_NAME), sizeof (resource_domain)); smb_config_unlock(); /* * If the SMB info cache is not valid, * try to locate a domain controller. */ if ((di = smb_getdomaininfo(0)) == NULL) { (void) mlsvc_locate_domain_controller(resource_domain); if ((di = smb_getdomaininfo(0)) == NULL) return (NT_STATUS_CANT_ACCESS_DOMAIN_INFO); } if ((mlsvc_echo(di->server)) < 0) { /* * We had a session to the DC but it's not responding. * So drop the credential chain and find another DC. */ netr_invalidate_chain(); (void) mlsvc_locate_domain_controller(resource_domain); if ((di = smb_getdomaininfo(0)) == NULL) return (NT_STATUS_CANT_ACCESS_DOMAIN_INFO); } do { status = netr_open(di->server, di->domain, &netr_handle); if (status != 0) return (status); if ((netr_global_info.flags & NETR_FLG_VALID) == 0) { status = netlogon_auth(di->server, &netr_handle, NETR_FLG_NULL); if (status != 0) { (void) netr_close(&netr_handle); return (NT_STATUS_LOGON_FAILURE); } netr_global_info.flags |= NETR_FLG_VALID; } status = netr_server_samlogon(&netr_handle, &netr_global_info, di->server, clnt, user_info); (void) netr_close(&netr_handle); } while (status == NT_STATUS_INSUFFICIENT_LOGON_INFO && retries++ < 3); if (retries >= 3) status = NT_STATUS_LOGON_FAILURE; return (status); } static DWORD netr_setup_userinfo(struct netr_validation_info3 *info3, smb_userinfo_t *user_info, netr_client_t *clnt) { smb_sid_attrs_t *other_grps; char *username, *domain; int i, nbytes; user_info->sid_name_use = SidTypeUser; user_info->rid = info3->UserId; user_info->primary_group_rid = info3->PrimaryGroupId; user_info->domain_sid = nt_sid_dup((nt_sid_t *)info3->LogonDomainId); if (user_info->domain_sid == NULL) return (NT_STATUS_NO_MEMORY); user_info->user_sid = nt_sid_splice(user_info->domain_sid, user_info->rid); if (user_info->user_sid == NULL) return (NT_STATUS_NO_MEMORY); user_info->pgrp_sid = nt_sid_splice(user_info->domain_sid, user_info->primary_group_rid); if (user_info->pgrp_sid == NULL) return (NT_STATUS_NO_MEMORY); username = (info3->EffectiveName.str) ? (char *)info3->EffectiveName.str : clnt->username; domain = (info3->LogonDomainName.str) ? (char *)info3->LogonDomainName.str : clnt->domain; if (username) user_info->name = strdup(username); if (domain) user_info->domain_name = strdup(domain); if (user_info->name == NULL || user_info->domain_name == NULL) return (NT_STATUS_NO_MEMORY); nbytes = info3->GroupCount * sizeof (smb_rid_attrs_t); if (nbytes) { if ((user_info->groups = malloc(nbytes)) != NULL) { user_info->n_groups = info3->GroupCount; (void) memcpy(user_info->groups, info3->GroupIds, nbytes); } else { return (NT_STATUS_NO_MEMORY); } } nbytes = info3->SidCount * sizeof (smb_sid_attrs_t); if (nbytes) { if ((other_grps = malloc(nbytes)) != NULL) { user_info->other_grps = other_grps; for (i = 0; i < info3->SidCount; i++) { other_grps[i].attrs = info3->ExtraSids[i].attributes; other_grps[i].sid = nt_sid_dup( (nt_sid_t *)info3->ExtraSids[i].sid); if (other_grps[i].sid == NULL) break; } user_info->n_other_grps = i; } else { return (NT_STATUS_NO_MEMORY); } } mlsvc_setadmin_user_info(user_info); return (NT_STATUS_SUCCESS); } /* * netr_server_samlogon * * NetrServerSamLogon RPC: interactive or network. It is assumed that * we have already authenticated with the PDC. If everything works, * we build a user info structure and return it, where the caller will * probably build an access token. * * Returns an NT status. There are numerous possibilities here. * For example: * NT_STATUS_INVALID_INFO_CLASS * NT_STATUS_INVALID_PARAMETER * NT_STATUS_ACCESS_DENIED * NT_STATUS_PASSWORD_MUST_CHANGE * NT_STATUS_NO_SUCH_USER * NT_STATUS_WRONG_PASSWORD * NT_STATUS_LOGON_FAILURE * NT_STATUS_ACCOUNT_RESTRICTION * NT_STATUS_INVALID_LOGON_HOURS * NT_STATUS_INVALID_WORKSTATION * NT_STATUS_INTERNAL_ERROR * NT_STATUS_PASSWORD_EXPIRED * NT_STATUS_ACCOUNT_DISABLED */ DWORD netr_server_samlogon(mlsvc_handle_t *netr_handle, netr_info_t *netr_info, char *server, netr_client_t *clnt, smb_userinfo_t *user_info) { struct netr_SamLogon arg; struct netr_authenticator auth; struct netr_authenticator ret_auth; struct netr_logon_info1 info1; struct netr_logon_info2 info2; struct netr_validation_info3 *info3; netr_response_t nt_rsp; netr_response_t lm_rsp; mlrpc_heapref_t heap; int opnum; int rc, len; DWORD status; bzero(&arg, sizeof (struct netr_SamLogon)); opnum = NETR_OPNUM_SamLogon; (void) mlsvc_rpc_init(&heap); /* * Should we get the server and hostname from netr_info? */ len = strlen(server) + 4; arg.servername = alloca(len); (void) snprintf((char *)arg.servername, len, "\\\\%s", server); arg.hostname = alloca(MLSVC_DOMAIN_NAME_MAX); rc = smb_gethostname((char *)arg.hostname, MLSVC_DOMAIN_NAME_MAX, 0); if (rc != 0) { mlrpc_heap_destroy(heap.heap); return (NT_STATUS_INTERNAL_ERROR); } rc = netr_setup_authenticator(netr_info, &auth, &ret_auth); if (rc != SMBAUTH_SUCCESS) { mlrpc_heap_destroy(heap.heap); return (NT_STATUS_INTERNAL_ERROR); } arg.auth = &auth; arg.ret_auth = &ret_auth; arg.validation_level = NETR_VALIDATION_LEVEL3; arg.logon_info.logon_level = clnt->logon_level; arg.logon_info.switch_value = clnt->logon_level; switch (clnt->logon_level) { case NETR_INTERACTIVE_LOGON: netr_setup_identity(heap.heap, clnt, &info1.identity); netr_interactive_samlogon(netr_info, clnt, &info1); arg.logon_info.ru.info1 = &info1; break; case NETR_NETWORK_LOGON: netr_setup_identity(heap.heap, clnt, &info2.identity); netr_network_samlogon(netr_info, clnt, &nt_rsp, &lm_rsp, &info2); arg.logon_info.ru.info2 = &info2; break; default: mlrpc_heap_destroy(heap.heap); return (NT_STATUS_INVALID_PARAMETER); } rc = mlsvc_rpc_call(netr_handle->context, opnum, &arg, &heap); if (rc != 0) { bzero(netr_info, sizeof (netr_info_t)); status = NT_STATUS_INVALID_PARAMETER; } else if (arg.status != 0) { status = NT_SC_VALUE(arg.status); /* * We need to validate the chain even though we have * a non-zero status. If the status is ACCESS_DENIED * this will trigger a new credential chain. However, * a valid credential is returned with some status * codes; for example, WRONG_PASSWORD. */ (void) netr_validate_chain(netr_info, arg.ret_auth); } else { status = netr_validate_chain(netr_info, arg.ret_auth); if (status == NT_STATUS_INSUFFICIENT_LOGON_INFO) { mlsvc_rpc_free(netr_handle->context, &heap); return (status); } info3 = arg.ru.info3; status = netr_setup_userinfo(info3, user_info, clnt); } mlsvc_rpc_free(netr_handle->context, &heap); return (status); } /* * netr_interactive_samlogon * * Set things up for an interactive SamLogon. Copy the NT and LM * passwords to the logon structure and hash them with the session * key. */ static void netr_interactive_samlogon(netr_info_t *netr_info, netr_client_t *clnt, struct netr_logon_info1 *info1) { BYTE key[NETR_OWF_PASSWORD_SZ]; (void) memcpy(&info1->lm_owf_password, clnt->lm_password.lm_password_val, sizeof (netr_owf_password_t)); (void) memcpy(&info1->nt_owf_password, clnt->nt_password.nt_password_val, sizeof (netr_owf_password_t)); (void) memset(key, 0, NETR_OWF_PASSWORD_SZ); (void) memcpy(key, netr_info->session_key, NETR_SESSION_KEY_SZ); rand_hash((unsigned char *)&info1->lm_owf_password, NETR_OWF_PASSWORD_SZ, key, NETR_OWF_PASSWORD_SZ); rand_hash((unsigned char *)&info1->nt_owf_password, NETR_OWF_PASSWORD_SZ, key, NETR_OWF_PASSWORD_SZ); } /* * netr_network_samlogon * * Set things up for a network SamLogon. We provide a copy of the random * challenge, that we sent to the client, to the domain controller. This * is the key that the client will have used to encrypt the NT and LM * passwords. Note that Windows 9x clients may not provide both passwords. */ /*ARGSUSED*/ static void netr_network_samlogon(netr_info_t *netr_info, netr_client_t *clnt, netr_response_t *ntr, netr_response_t *lmr, struct netr_logon_info2 *info2) { bcopy(clnt->challenge_key.challenge_key_val, info2->lm_challenge.data, 8); if (clnt->nt_password.nt_password_len == NETR_CR_PASSWORD_SIZE) { ntr->length = NETR_CR_PASSWORD_SIZE; ntr->start = 0; ntr->max_length = NETR_CR_PASSWORD_SIZE; bcopy(clnt->nt_password.nt_password_val, ntr->data, NETR_CR_PASSWORD_SIZE); info2->nt_response.length = NETR_CR_PASSWORD_SIZE; info2->nt_response.max_length = NETR_CR_PASSWORD_SIZE; info2->nt_response.data = ntr; } else { info2->nt_response.length = 0; info2->nt_response.max_length = 0; info2->nt_response.data = 0; } if (clnt->lm_password.lm_password_len == NETR_CR_PASSWORD_SIZE) { lmr->length = NETR_CR_PASSWORD_SIZE; lmr->start = 0; lmr->max_length = NETR_CR_PASSWORD_SIZE; bcopy(clnt->lm_password.lm_password_val, lmr->data, NETR_CR_PASSWORD_SIZE); info2->lm_response.length = NETR_CR_PASSWORD_SIZE; info2->lm_response.max_length = NETR_CR_PASSWORD_SIZE; info2->lm_response.data = lmr; } else { info2->lm_response.length = 0; info2->lm_response.max_length = 0; info2->lm_response.data = 0; } } /* * netr_setup_authenticator * * Set up the request and return authenticators. A new credential is * generated from the session key, the current client credential and * the current time, i.e. * * NewCredential = Cred(SessionKey, OldCredential, time); * * The timestamp, which is used as a random seed, is stored in both * the request and return authenticators. * * If any difficulties occur using the cryptographic framework, the * function returns SMBAUTH_FAILURE. Otherwise SMBAUTH_SUCCESS is * returned. */ int netr_setup_authenticator(netr_info_t *netr_info, struct netr_authenticator *auth, struct netr_authenticator *ret_auth) { bzero(auth, sizeof (struct netr_authenticator)); netr_info->timestamp = time(0); auth->timestamp = netr_info->timestamp; if (netr_gen_credentials(netr_info->session_key, &netr_info->client_credential, netr_info->timestamp, (netr_cred_t *)&auth->credential) != SMBAUTH_SUCCESS) return (SMBAUTH_FAILURE); if (ret_auth) { bzero(ret_auth, sizeof (struct netr_authenticator)); ret_auth->timestamp = netr_info->timestamp; } return (SMBAUTH_SUCCESS); } /* * Validate the returned credentials and update the credential chain. * The server returns an updated client credential rather than a new * server credential. The server uses (timestamp + 1) when generating * the credential. * * Generate the new seed for the credential chain. The new seed is * formed by adding (timestamp + 1) to the current client credential. * The only quirk is the DWORD style addition. * * Returns NT_STATUS_INSUFFICIENT_LOGON_INFO if auth->credential is a * NULL pointer. The Authenticator field of the SamLogon response packet * sent by the Samba 3 PDC always return NULL pointer if the received * SamLogon request is not immediately followed by the ServerReqChallenge * and ServerAuthenticate2 requests. * * Returns NT_STATUS_SUCCESS if the server returned a valid credential. * Otherwise we retirm NT_STATUS_UNSUCCESSFUL. */ DWORD netr_validate_chain(netr_info_t *netr_info, struct netr_authenticator *auth) { netr_cred_t cred; DWORD result = NT_STATUS_SUCCESS; DWORD *dwp; ++netr_info->timestamp; if (netr_gen_credentials(netr_info->session_key, &netr_info->client_credential, netr_info->timestamp, &cred) != SMBAUTH_SUCCESS) return (NT_STATUS_INTERNAL_ERROR); if (&auth->credential == 0) { /* * If the validation fails, destroy the credential chain. * This should trigger a new authentication chain. */ bzero(netr_info, sizeof (netr_info_t)); return (NT_STATUS_INSUFFICIENT_LOGON_INFO); } result = memcmp(&cred, &auth->credential, sizeof (netr_cred_t)); if (result != 0) { /* * If the validation fails, destroy the credential chain. * This should trigger a new authentication chain. */ bzero(netr_info, sizeof (netr_info_t)); result = NT_STATUS_UNSUCCESSFUL; } else { /* * Otherwise generate the next step in the chain. */ /*LINTED E_BAD_PTR_CAST_ALIGN*/ dwp = (DWORD *)&netr_info->client_credential; dwp[0] += netr_info->timestamp; netr_info->flags |= NETR_FLG_VALID; } return (result); } /* * netr_invalidate_chain * * Mark the credential chain as invalid so that it will be recreated * on the next attempt. */ static void netr_invalidate_chain(void) { netr_global_info.flags &= ~NETR_FLG_VALID; } /* * netr_setup_identity * * Set up the client identity information. All of this information is * specifically related to the client user and workstation attempting * to access this system. It may not be in our primary domain. * * I don't know what logon_id is, it seems to be a unique identifier. * Increment it before each use. */ static void netr_setup_identity(mlrpc_heap_t *heap, netr_client_t *clnt, netr_logon_id_t *identity) { static DWORD logon_id; if (logon_id == 0) logon_id = 0xDCD0; ++logon_id; clnt->logon_id = logon_id; identity->parameter_control = 0; identity->logon_id.LowPart = logon_id; identity->logon_id.HighPart = 0; mlrpc_heap_mkvcs(heap, clnt->domain, (mlrpc_vcbuf_t *)&identity->domain_name); mlrpc_heap_mkvcs(heap, clnt->username, (mlrpc_vcbuf_t *)&identity->username); /* * Some systems prefix the client workstation name with \\. * It doesn't seem to make any difference whether it's there * or not. */ mlrpc_heap_mkvcs(heap, clnt->workstation, (mlrpc_vcbuf_t *)&identity->workstation); }