/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2007 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "zfs_namecheck.h" #include "libzfs_impl.h" /* * Validate the given pool name, optionally putting an extended error message in * 'buf'. */ static boolean_t zpool_name_valid(libzfs_handle_t *hdl, boolean_t isopen, const char *pool) { namecheck_err_t why; char what; int ret; ret = pool_namecheck(pool, &why, &what); /* * The rules for reserved pool names were extended at a later point. * But we need to support users with existing pools that may now be * invalid. So we only check for this expanded set of names during a * create (or import), and only in userland. */ if (ret == 0 && !isopen && (strncmp(pool, "mirror", 6) == 0 || strncmp(pool, "raidz", 5) == 0 || strncmp(pool, "spare", 5) == 0)) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "name is reserved")); return (B_FALSE); } if (ret != 0) { if (hdl != NULL) { switch (why) { case NAME_ERR_TOOLONG: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "name is too long")); break; case NAME_ERR_INVALCHAR: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "invalid character " "'%c' in pool name"), what); break; case NAME_ERR_NOLETTER: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "name must begin with a letter")); break; case NAME_ERR_RESERVED: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "name is reserved")); break; case NAME_ERR_DISKLIKE: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "pool name is reserved")); break; case NAME_ERR_LEADING_SLASH: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "leading slash in name")); break; case NAME_ERR_EMPTY_COMPONENT: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "empty component in name")); break; case NAME_ERR_TRAILING_SLASH: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "trailing slash in name")); break; case NAME_ERR_MULTIPLE_AT: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "multiple '@' delimiters in name")); break; } } return (B_FALSE); } return (B_TRUE); } /* * Open a handle to the given pool, even if the pool is currently in the FAULTED * state. */ zpool_handle_t * zpool_open_canfail(libzfs_handle_t *hdl, const char *pool) { zpool_handle_t *zhp; boolean_t missing; /* * Make sure the pool name is valid. */ if (!zpool_name_valid(hdl, B_TRUE, pool)) { (void) zfs_error_fmt(hdl, EZFS_INVALIDNAME, dgettext(TEXT_DOMAIN, "cannot open '%s'"), pool); return (NULL); } if ((zhp = zfs_alloc(hdl, sizeof (zpool_handle_t))) == NULL) return (NULL); zhp->zpool_hdl = hdl; (void) strlcpy(zhp->zpool_name, pool, sizeof (zhp->zpool_name)); if (zpool_refresh_stats(zhp, &missing) != 0) { zpool_close(zhp); return (NULL); } if (missing) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "no such pool")); (void) zfs_error_fmt(hdl, EZFS_NOENT, dgettext(TEXT_DOMAIN, "cannot open '%s'"), pool); zpool_close(zhp); return (NULL); } return (zhp); } /* * Like the above, but silent on error. Used when iterating over pools (because * the configuration cache may be out of date). */ int zpool_open_silent(libzfs_handle_t *hdl, const char *pool, zpool_handle_t **ret) { zpool_handle_t *zhp; boolean_t missing; if ((zhp = zfs_alloc(hdl, sizeof (zpool_handle_t))) == NULL) return (-1); zhp->zpool_hdl = hdl; (void) strlcpy(zhp->zpool_name, pool, sizeof (zhp->zpool_name)); if (zpool_refresh_stats(zhp, &missing) != 0) { zpool_close(zhp); return (-1); } if (missing) { zpool_close(zhp); *ret = NULL; return (0); } *ret = zhp; return (0); } /* * Similar to zpool_open_canfail(), but refuses to open pools in the faulted * state. */ zpool_handle_t * zpool_open(libzfs_handle_t *hdl, const char *pool) { zpool_handle_t *zhp; if ((zhp = zpool_open_canfail(hdl, pool)) == NULL) return (NULL); if (zhp->zpool_state == POOL_STATE_UNAVAIL) { (void) zfs_error_fmt(hdl, EZFS_POOLUNAVAIL, dgettext(TEXT_DOMAIN, "cannot open '%s'"), zhp->zpool_name); zpool_close(zhp); return (NULL); } return (zhp); } /* * Close the handle. Simply frees the memory associated with the handle. */ void zpool_close(zpool_handle_t *zhp) { if (zhp->zpool_config) nvlist_free(zhp->zpool_config); if (zhp->zpool_old_config) nvlist_free(zhp->zpool_old_config); free(zhp); } /* * Return the name of the pool. */ const char * zpool_get_name(zpool_handle_t *zhp) { return (zhp->zpool_name); } /* * Return the GUID of the pool. */ uint64_t zpool_get_guid(zpool_handle_t *zhp) { uint64_t guid; verify(nvlist_lookup_uint64(zhp->zpool_config, ZPOOL_CONFIG_POOL_GUID, &guid) == 0); return (guid); } /* * Return the version of the pool. */ uint64_t zpool_get_version(zpool_handle_t *zhp) { uint64_t version; verify(nvlist_lookup_uint64(zhp->zpool_config, ZPOOL_CONFIG_VERSION, &version) == 0); return (version); } /* * Return the amount of space currently consumed by the pool. */ uint64_t zpool_get_space_used(zpool_handle_t *zhp) { nvlist_t *nvroot; vdev_stat_t *vs; uint_t vsc; verify(nvlist_lookup_nvlist(zhp->zpool_config, ZPOOL_CONFIG_VDEV_TREE, &nvroot) == 0); verify(nvlist_lookup_uint64_array(nvroot, ZPOOL_CONFIG_STATS, (uint64_t **)&vs, &vsc) == 0); return (vs->vs_alloc); } /* * Return the total space in the pool. */ uint64_t zpool_get_space_total(zpool_handle_t *zhp) { nvlist_t *nvroot; vdev_stat_t *vs; uint_t vsc; verify(nvlist_lookup_nvlist(zhp->zpool_config, ZPOOL_CONFIG_VDEV_TREE, &nvroot) == 0); verify(nvlist_lookup_uint64_array(nvroot, ZPOOL_CONFIG_STATS, (uint64_t **)&vs, &vsc) == 0); return (vs->vs_space); } /* * Return the alternate root for this pool, if any. */ int zpool_get_root(zpool_handle_t *zhp, char *buf, size_t buflen) { zfs_cmd_t zc = { 0 }; (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); if (ioctl(zhp->zpool_hdl->libzfs_fd, ZFS_IOC_OBJSET_STATS, &zc) != 0 || zc.zc_value[0] == '\0') return (-1); (void) strlcpy(buf, zc.zc_value, buflen); return (0); } /* * Return the state of the pool (ACTIVE or UNAVAILABLE) */ int zpool_get_state(zpool_handle_t *zhp) { return (zhp->zpool_state); } /* * Create the named pool, using the provided vdev list. It is assumed * that the consumer has already validated the contents of the nvlist, so we * don't have to worry about error semantics. */ int zpool_create(libzfs_handle_t *hdl, const char *pool, nvlist_t *nvroot, const char *altroot) { zfs_cmd_t zc = { 0 }; char msg[1024]; (void) snprintf(msg, sizeof (msg), dgettext(TEXT_DOMAIN, "cannot create '%s'"), pool); if (!zpool_name_valid(hdl, B_FALSE, pool)) return (zfs_error(hdl, EZFS_INVALIDNAME, msg)); if (altroot != NULL && altroot[0] != '/') return (zfs_error_fmt(hdl, EZFS_BADPATH, dgettext(TEXT_DOMAIN, "bad alternate root '%s'"), altroot)); if (zcmd_write_src_nvlist(hdl, &zc, nvroot, NULL) != 0) return (-1); (void) strlcpy(zc.zc_name, pool, sizeof (zc.zc_name)); if (altroot != NULL) (void) strlcpy(zc.zc_value, altroot, sizeof (zc.zc_value)); if (ioctl(hdl->libzfs_fd, ZFS_IOC_POOL_CREATE, &zc) != 0) { zcmd_free_nvlists(&zc); switch (errno) { case EBUSY: /* * This can happen if the user has specified the same * device multiple times. We can't reliably detect this * until we try to add it and see we already have a * label. */ zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "one or more vdevs refer to the same device")); return (zfs_error(hdl, EZFS_BADDEV, msg)); case EOVERFLOW: /* * This occurs when one of the devices is below * SPA_MINDEVSIZE. Unfortunately, we can't detect which * device was the problem device since there's no * reliable way to determine device size from userland. */ { char buf[64]; zfs_nicenum(SPA_MINDEVSIZE, buf, sizeof (buf)); zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "one or more devices is less than the " "minimum size (%s)"), buf); } return (zfs_error(hdl, EZFS_BADDEV, msg)); case ENOSPC: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "one or more devices is out of space")); return (zfs_error(hdl, EZFS_BADDEV, msg)); default: return (zpool_standard_error(hdl, errno, msg)); } } zcmd_free_nvlists(&zc); /* * If this is an alternate root pool, then we automatically set the * mountpoint of the root dataset to be '/'. */ if (altroot != NULL) { zfs_handle_t *zhp; verify((zhp = zfs_open(hdl, pool, ZFS_TYPE_ANY)) != NULL); verify(zfs_prop_set(zhp, zfs_prop_to_name(ZFS_PROP_MOUNTPOINT), "/") == 0); zfs_close(zhp); } return (0); } /* * Destroy the given pool. It is up to the caller to ensure that there are no * datasets left in the pool. */ int zpool_destroy(zpool_handle_t *zhp) { zfs_cmd_t zc = { 0 }; zfs_handle_t *zfp = NULL; libzfs_handle_t *hdl = zhp->zpool_hdl; char msg[1024]; if (zhp->zpool_state == POOL_STATE_ACTIVE && (zfp = zfs_open(zhp->zpool_hdl, zhp->zpool_name, ZFS_TYPE_FILESYSTEM)) == NULL) return (-1); if (zpool_remove_zvol_links(zhp) != 0) return (-1); (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); if (ioctl(zhp->zpool_hdl->libzfs_fd, ZFS_IOC_POOL_DESTROY, &zc) != 0) { (void) snprintf(msg, sizeof (msg), dgettext(TEXT_DOMAIN, "cannot destroy '%s'"), zhp->zpool_name); if (errno == EROFS) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "one or more devices is read only")); (void) zfs_error(hdl, EZFS_BADDEV, msg); } else { (void) zpool_standard_error(hdl, errno, msg); } if (zfp) zfs_close(zfp); return (-1); } if (zfp) { remove_mountpoint(zfp); zfs_close(zfp); } return (0); } /* * Add the given vdevs to the pool. The caller must have already performed the * necessary verification to ensure that the vdev specification is well-formed. */ int zpool_add(zpool_handle_t *zhp, nvlist_t *nvroot) { zfs_cmd_t zc = { 0 }; int ret; libzfs_handle_t *hdl = zhp->zpool_hdl; char msg[1024]; nvlist_t **spares; uint_t nspares; (void) snprintf(msg, sizeof (msg), dgettext(TEXT_DOMAIN, "cannot add to '%s'"), zhp->zpool_name); if (zpool_get_version(zhp) < ZFS_VERSION_SPARES && nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_SPARES, &spares, &nspares) == 0) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "pool must be " "upgraded to add hot spares")); return (zfs_error(hdl, EZFS_BADVERSION, msg)); } if (zcmd_write_src_nvlist(hdl, &zc, nvroot, NULL) != 0) return (-1); (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); if (ioctl(zhp->zpool_hdl->libzfs_fd, ZFS_IOC_VDEV_ADD, &zc) != 0) { switch (errno) { case EBUSY: /* * This can happen if the user has specified the same * device multiple times. We can't reliably detect this * until we try to add it and see we already have a * label. */ zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "one or more vdevs refer to the same device")); (void) zfs_error(hdl, EZFS_BADDEV, msg); break; case EOVERFLOW: /* * This occurrs when one of the devices is below * SPA_MINDEVSIZE. Unfortunately, we can't detect which * device was the problem device since there's no * reliable way to determine device size from userland. */ { char buf[64]; zfs_nicenum(SPA_MINDEVSIZE, buf, sizeof (buf)); zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "device is less than the minimum " "size (%s)"), buf); } (void) zfs_error(hdl, EZFS_BADDEV, msg); break; case ENOTSUP: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "pool must be upgraded to add raidz2 vdevs")); (void) zfs_error(hdl, EZFS_BADVERSION, msg); break; default: (void) zpool_standard_error(hdl, errno, msg); } ret = -1; } else { ret = 0; } zcmd_free_nvlists(&zc); return (ret); } /* * Exports the pool from the system. The caller must ensure that there are no * mounted datasets in the pool. */ int zpool_export(zpool_handle_t *zhp) { zfs_cmd_t zc = { 0 }; if (zpool_remove_zvol_links(zhp) != 0) return (-1); (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); if (ioctl(zhp->zpool_hdl->libzfs_fd, ZFS_IOC_POOL_EXPORT, &zc) != 0) return (zpool_standard_error_fmt(zhp->zpool_hdl, errno, dgettext(TEXT_DOMAIN, "cannot export '%s'"), zhp->zpool_name)); return (0); } /* * Import the given pool using the known configuration. The configuration * should have come from zpool_find_import(). The 'newname' and 'altroot' * parameters control whether the pool is imported with a different name or with * an alternate root, respectively. */ int zpool_import(libzfs_handle_t *hdl, nvlist_t *config, const char *newname, const char *altroot) { zfs_cmd_t zc = { 0 }; char *thename; char *origname; int ret; verify(nvlist_lookup_string(config, ZPOOL_CONFIG_POOL_NAME, &origname) == 0); if (newname != NULL) { if (!zpool_name_valid(hdl, B_FALSE, newname)) return (zfs_error_fmt(hdl, EZFS_INVALIDNAME, dgettext(TEXT_DOMAIN, "cannot import '%s'"), newname)); thename = (char *)newname; } else { thename = origname; } if (altroot != NULL && altroot[0] != '/') return (zfs_error_fmt(hdl, EZFS_BADPATH, dgettext(TEXT_DOMAIN, "bad alternate root '%s'"), altroot)); (void) strlcpy(zc.zc_name, thename, sizeof (zc.zc_name)); if (altroot != NULL) (void) strlcpy(zc.zc_value, altroot, sizeof (zc.zc_value)); else zc.zc_value[0] = '\0'; verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_GUID, &zc.zc_guid) == 0); if (zcmd_write_src_nvlist(hdl, &zc, config, NULL) != 0) return (-1); ret = 0; if (ioctl(hdl->libzfs_fd, ZFS_IOC_POOL_IMPORT, &zc) != 0) { char desc[1024]; if (newname == NULL) (void) snprintf(desc, sizeof (desc), dgettext(TEXT_DOMAIN, "cannot import '%s'"), thename); else (void) snprintf(desc, sizeof (desc), dgettext(TEXT_DOMAIN, "cannot import '%s' as '%s'"), origname, thename); switch (errno) { case ENOTSUP: /* * Unsupported version. */ (void) zfs_error(hdl, EZFS_BADVERSION, desc); break; case EINVAL: (void) zfs_error(hdl, EZFS_INVALCONFIG, desc); break; default: (void) zpool_standard_error(hdl, errno, desc); } ret = -1; } else { zpool_handle_t *zhp; /* * This should never fail, but play it safe anyway. */ if (zpool_open_silent(hdl, thename, &zhp) != 0) { ret = -1; } else if (zhp != NULL) { ret = zpool_create_zvol_links(zhp); zpool_close(zhp); } } zcmd_free_nvlists(&zc); return (ret); } /* * Scrub the pool. */ int zpool_scrub(zpool_handle_t *zhp, pool_scrub_type_t type) { zfs_cmd_t zc = { 0 }; char msg[1024]; libzfs_handle_t *hdl = zhp->zpool_hdl; (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); zc.zc_cookie = type; if (ioctl(zhp->zpool_hdl->libzfs_fd, ZFS_IOC_POOL_SCRUB, &zc) == 0) return (0); (void) snprintf(msg, sizeof (msg), dgettext(TEXT_DOMAIN, "cannot scrub %s"), zc.zc_name); if (errno == EBUSY) return (zfs_error(hdl, EZFS_RESILVERING, msg)); else return (zpool_standard_error(hdl, errno, msg)); } /* * 'avail_spare' is set to TRUE if the provided guid refers to an AVAIL * spare; but FALSE if its an INUSE spare. */ static nvlist_t * vdev_to_nvlist_iter(nvlist_t *nv, const char *search, uint64_t guid, boolean_t *avail_spare) { uint_t c, children; nvlist_t **child; uint64_t theguid, present; char *path; uint64_t wholedisk = 0; nvlist_t *ret; verify(nvlist_lookup_uint64(nv, ZPOOL_CONFIG_GUID, &theguid) == 0); if (search == NULL && nvlist_lookup_uint64(nv, ZPOOL_CONFIG_NOT_PRESENT, &present) == 0) { /* * If the device has never been present since import, the only * reliable way to match the vdev is by GUID. */ if (theguid == guid) return (nv); } else if (search != NULL && nvlist_lookup_string(nv, ZPOOL_CONFIG_PATH, &path) == 0) { (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_WHOLE_DISK, &wholedisk); if (wholedisk) { /* * For whole disks, the internal path has 's0', but the * path passed in by the user doesn't. */ if (strlen(search) == strlen(path) - 2 && strncmp(search, path, strlen(search)) == 0) return (nv); } else if (strcmp(search, path) == 0) { return (nv); } } if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, &child, &children) != 0) return (NULL); for (c = 0; c < children; c++) if ((ret = vdev_to_nvlist_iter(child[c], search, guid, avail_spare)) != NULL) return (ret); if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_SPARES, &child, &children) == 0) { for (c = 0; c < children; c++) { if ((ret = vdev_to_nvlist_iter(child[c], search, guid, avail_spare)) != NULL) { *avail_spare = B_TRUE; return (ret); } } } return (NULL); } nvlist_t * zpool_find_vdev(zpool_handle_t *zhp, const char *path, boolean_t *avail_spare) { char buf[MAXPATHLEN]; const char *search; char *end; nvlist_t *nvroot; uint64_t guid; guid = strtoull(path, &end, 10); if (guid != 0 && *end == '\0') { search = NULL; } else if (path[0] != '/') { (void) snprintf(buf, sizeof (buf), "%s%s", "/dev/dsk/", path); search = buf; } else { search = path; } verify(nvlist_lookup_nvlist(zhp->zpool_config, ZPOOL_CONFIG_VDEV_TREE, &nvroot) == 0); *avail_spare = B_FALSE; return (vdev_to_nvlist_iter(nvroot, search, guid, avail_spare)); } /* * Returns TRUE if the given guid corresponds to a spare (INUSE or not). */ static boolean_t is_spare(zpool_handle_t *zhp, uint64_t guid) { uint64_t spare_guid; nvlist_t *nvroot; nvlist_t **spares; uint_t nspares; int i; verify(nvlist_lookup_nvlist(zhp->zpool_config, ZPOOL_CONFIG_VDEV_TREE, &nvroot) == 0); if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_SPARES, &spares, &nspares) == 0) { for (i = 0; i < nspares; i++) { verify(nvlist_lookup_uint64(spares[i], ZPOOL_CONFIG_GUID, &spare_guid) == 0); if (guid == spare_guid) return (B_TRUE); } } return (B_FALSE); } /* * Bring the specified vdev online */ int zpool_vdev_online(zpool_handle_t *zhp, const char *path) { zfs_cmd_t zc = { 0 }; char msg[1024]; nvlist_t *tgt; boolean_t avail_spare; libzfs_handle_t *hdl = zhp->zpool_hdl; (void) snprintf(msg, sizeof (msg), dgettext(TEXT_DOMAIN, "cannot online %s"), path); (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); if ((tgt = zpool_find_vdev(zhp, path, &avail_spare)) == NULL) return (zfs_error(hdl, EZFS_NODEVICE, msg)); verify(nvlist_lookup_uint64(tgt, ZPOOL_CONFIG_GUID, &zc.zc_guid) == 0); if (avail_spare || is_spare(zhp, zc.zc_guid) == B_TRUE) return (zfs_error(hdl, EZFS_ISSPARE, msg)); if (ioctl(zhp->zpool_hdl->libzfs_fd, ZFS_IOC_VDEV_ONLINE, &zc) == 0) return (0); return (zpool_standard_error(hdl, errno, msg)); } /* * Take the specified vdev offline */ int zpool_vdev_offline(zpool_handle_t *zhp, const char *path, int istmp) { zfs_cmd_t zc = { 0 }; char msg[1024]; nvlist_t *tgt; boolean_t avail_spare; libzfs_handle_t *hdl = zhp->zpool_hdl; (void) snprintf(msg, sizeof (msg), dgettext(TEXT_DOMAIN, "cannot offline %s"), path); (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); if ((tgt = zpool_find_vdev(zhp, path, &avail_spare)) == NULL) return (zfs_error(hdl, EZFS_NODEVICE, msg)); verify(nvlist_lookup_uint64(tgt, ZPOOL_CONFIG_GUID, &zc.zc_guid) == 0); if (avail_spare || is_spare(zhp, zc.zc_guid) == B_TRUE) return (zfs_error(hdl, EZFS_ISSPARE, msg)); zc.zc_cookie = istmp; if (ioctl(zhp->zpool_hdl->libzfs_fd, ZFS_IOC_VDEV_OFFLINE, &zc) == 0) return (0); switch (errno) { case EBUSY: /* * There are no other replicas of this device. */ return (zfs_error(hdl, EZFS_NOREPLICAS, msg)); default: return (zpool_standard_error(hdl, errno, msg)); } } /* * Returns TRUE if the given nvlist is a vdev that was originally swapped in as * a hot spare. */ static boolean_t is_replacing_spare(nvlist_t *search, nvlist_t *tgt, int which) { nvlist_t **child; uint_t c, children; char *type; if (nvlist_lookup_nvlist_array(search, ZPOOL_CONFIG_CHILDREN, &child, &children) == 0) { verify(nvlist_lookup_string(search, ZPOOL_CONFIG_TYPE, &type) == 0); if (strcmp(type, VDEV_TYPE_SPARE) == 0 && children == 2 && child[which] == tgt) return (B_TRUE); for (c = 0; c < children; c++) if (is_replacing_spare(child[c], tgt, which)) return (B_TRUE); } return (B_FALSE); } /* * Attach new_disk (fully described by nvroot) to old_disk. * If 'replacing' is specified, tne new disk will replace the old one. */ int zpool_vdev_attach(zpool_handle_t *zhp, const char *old_disk, const char *new_disk, nvlist_t *nvroot, int replacing) { zfs_cmd_t zc = { 0 }; char msg[1024]; int ret; nvlist_t *tgt; boolean_t avail_spare; uint64_t val; char *path; nvlist_t **child; uint_t children; nvlist_t *config_root; libzfs_handle_t *hdl = zhp->zpool_hdl; if (replacing) (void) snprintf(msg, sizeof (msg), dgettext(TEXT_DOMAIN, "cannot replace %s with %s"), old_disk, new_disk); else (void) snprintf(msg, sizeof (msg), dgettext(TEXT_DOMAIN, "cannot attach %s to %s"), new_disk, old_disk); (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); if ((tgt = zpool_find_vdev(zhp, old_disk, &avail_spare)) == 0) return (zfs_error(hdl, EZFS_NODEVICE, msg)); if (avail_spare) return (zfs_error(hdl, EZFS_ISSPARE, msg)); verify(nvlist_lookup_uint64(tgt, ZPOOL_CONFIG_GUID, &zc.zc_guid) == 0); zc.zc_cookie = replacing; if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_CHILDREN, &child, &children) != 0 || children != 1) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "new device must be a single disk")); return (zfs_error(hdl, EZFS_INVALCONFIG, msg)); } verify(nvlist_lookup_nvlist(zpool_get_config(zhp, NULL), ZPOOL_CONFIG_VDEV_TREE, &config_root) == 0); /* * If the target is a hot spare that has been swapped in, we can only * replace it with another hot spare. */ if (replacing && nvlist_lookup_uint64(tgt, ZPOOL_CONFIG_IS_SPARE, &val) == 0 && nvlist_lookup_string(child[0], ZPOOL_CONFIG_PATH, &path) == 0 && (zpool_find_vdev(zhp, path, &avail_spare) == NULL || !avail_spare) && is_replacing_spare(config_root, tgt, 1)) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "can only be replaced by another hot spare")); return (zfs_error(hdl, EZFS_BADTARGET, msg)); } /* * If we are attempting to replace a spare, it canot be applied to an * already spared device. */ if (replacing && nvlist_lookup_string(child[0], ZPOOL_CONFIG_PATH, &path) == 0 && zpool_find_vdev(zhp, path, &avail_spare) != NULL && avail_spare && is_replacing_spare(config_root, tgt, 0)) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "device has already been replaced with a spare")); return (zfs_error(hdl, EZFS_BADTARGET, msg)); } if (zcmd_write_src_nvlist(hdl, &zc, nvroot, NULL) != 0) return (-1); ret = ioctl(zhp->zpool_hdl->libzfs_fd, ZFS_IOC_VDEV_ATTACH, &zc); zcmd_free_nvlists(&zc); if (ret == 0) return (0); switch (errno) { case ENOTSUP: /* * Can't attach to or replace this type of vdev. */ if (replacing) zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "cannot replace a replacing device")); else zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "can only attach to mirrors and top-level " "disks")); (void) zfs_error(hdl, EZFS_BADTARGET, msg); break; case EINVAL: /* * The new device must be a single disk. */ zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "new device must be a single disk")); (void) zfs_error(hdl, EZFS_INVALCONFIG, msg); break; case EBUSY: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "%s is busy"), new_disk); (void) zfs_error(hdl, EZFS_BADDEV, msg); break; case EOVERFLOW: /* * The new device is too small. */ zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "device is too small")); (void) zfs_error(hdl, EZFS_BADDEV, msg); break; case EDOM: /* * The new device has a different alignment requirement. */ zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "devices have different sector alignment")); (void) zfs_error(hdl, EZFS_BADDEV, msg); break; case ENAMETOOLONG: /* * The resulting top-level vdev spec won't fit in the label. */ (void) zfs_error(hdl, EZFS_DEVOVERFLOW, msg); break; default: (void) zpool_standard_error(hdl, errno, msg); } return (-1); } /* * Detach the specified device. */ int zpool_vdev_detach(zpool_handle_t *zhp, const char *path) { zfs_cmd_t zc = { 0 }; char msg[1024]; nvlist_t *tgt; boolean_t avail_spare; libzfs_handle_t *hdl = zhp->zpool_hdl; (void) snprintf(msg, sizeof (msg), dgettext(TEXT_DOMAIN, "cannot detach %s"), path); (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); if ((tgt = zpool_find_vdev(zhp, path, &avail_spare)) == 0) return (zfs_error(hdl, EZFS_NODEVICE, msg)); if (avail_spare) return (zfs_error(hdl, EZFS_ISSPARE, msg)); verify(nvlist_lookup_uint64(tgt, ZPOOL_CONFIG_GUID, &zc.zc_guid) == 0); if (ioctl(hdl->libzfs_fd, ZFS_IOC_VDEV_DETACH, &zc) == 0) return (0); switch (errno) { case ENOTSUP: /* * Can't detach from this type of vdev. */ zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "only " "applicable to mirror and replacing vdevs")); (void) zfs_error(zhp->zpool_hdl, EZFS_BADTARGET, msg); break; case EBUSY: /* * There are no other replicas of this device. */ (void) zfs_error(hdl, EZFS_NOREPLICAS, msg); break; default: (void) zpool_standard_error(hdl, errno, msg); } return (-1); } /* * Remove the given device. Currently, this is supported only for hot spares. */ int zpool_vdev_remove(zpool_handle_t *zhp, const char *path) { zfs_cmd_t zc = { 0 }; char msg[1024]; nvlist_t *tgt; boolean_t avail_spare; libzfs_handle_t *hdl = zhp->zpool_hdl; (void) snprintf(msg, sizeof (msg), dgettext(TEXT_DOMAIN, "cannot remove %s"), path); (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); if ((tgt = zpool_find_vdev(zhp, path, &avail_spare)) == 0) return (zfs_error(hdl, EZFS_NODEVICE, msg)); if (!avail_spare) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "only inactive hot spares can be removed")); return (zfs_error(hdl, EZFS_NODEVICE, msg)); } verify(nvlist_lookup_uint64(tgt, ZPOOL_CONFIG_GUID, &zc.zc_guid) == 0); if (ioctl(hdl->libzfs_fd, ZFS_IOC_VDEV_REMOVE, &zc) == 0) return (0); return (zpool_standard_error(hdl, errno, msg)); } /* * Clear the errors for the pool, or the particular device if specified. */ int zpool_clear(zpool_handle_t *zhp, const char *path) { zfs_cmd_t zc = { 0 }; char msg[1024]; nvlist_t *tgt; boolean_t avail_spare; libzfs_handle_t *hdl = zhp->zpool_hdl; if (path) (void) snprintf(msg, sizeof (msg), dgettext(TEXT_DOMAIN, "cannot clear errors for %s"), path); else (void) snprintf(msg, sizeof (msg), dgettext(TEXT_DOMAIN, "cannot clear errors for %s"), zhp->zpool_name); (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); if (path) { if ((tgt = zpool_find_vdev(zhp, path, &avail_spare)) == 0) return (zfs_error(hdl, EZFS_NODEVICE, msg)); if (avail_spare) return (zfs_error(hdl, EZFS_ISSPARE, msg)); verify(nvlist_lookup_uint64(tgt, ZPOOL_CONFIG_GUID, &zc.zc_guid) == 0); } if (ioctl(hdl->libzfs_fd, ZFS_IOC_CLEAR, &zc) == 0) return (0); return (zpool_standard_error(hdl, errno, msg)); } /* * Iterate over all zvols in a given pool by walking the /dev/zvol/dsk/ * hierarchy. */ int zpool_iter_zvol(zpool_handle_t *zhp, int (*cb)(const char *, void *), void *data) { libzfs_handle_t *hdl = zhp->zpool_hdl; char (*paths)[MAXPATHLEN]; size_t size = 4; int curr, fd, base, ret = 0; DIR *dirp; struct dirent *dp; struct stat st; if ((base = open("/dev/zvol/dsk", O_RDONLY)) < 0) return (errno == ENOENT ? 0 : -1); if (fstatat(base, zhp->zpool_name, &st, 0) != 0) { int err = errno; (void) close(base); return (err == ENOENT ? 0 : -1); } /* * Oddly this wasn't a directory -- ignore that failure since we * know there are no links lower in the (non-existant) hierarchy. */ if (!S_ISDIR(st.st_mode)) { (void) close(base); return (0); } if ((paths = zfs_alloc(hdl, size * sizeof (paths[0]))) == NULL) { (void) close(base); return (-1); } (void) strlcpy(paths[0], zhp->zpool_name, sizeof (paths[0])); curr = 0; while (curr >= 0) { if (fstatat(base, paths[curr], &st, AT_SYMLINK_NOFOLLOW) != 0) goto err; if (S_ISDIR(st.st_mode)) { if ((fd = openat(base, paths[curr], O_RDONLY)) < 0) goto err; if ((dirp = fdopendir(fd)) == NULL) { (void) close(fd); goto err; } while ((dp = readdir(dirp)) != NULL) { if (dp->d_name[0] == '.') continue; if (curr + 1 == size) { paths = zfs_realloc(hdl, paths, size * sizeof (paths[0]), size * 2 * sizeof (paths[0])); if (paths == NULL) { (void) closedir(dirp); (void) close(fd); goto err; } size *= 2; } (void) strlcpy(paths[curr + 1], paths[curr], sizeof (paths[curr + 1])); (void) strlcat(paths[curr], "/", sizeof (paths[curr])); (void) strlcat(paths[curr], dp->d_name, sizeof (paths[curr])); curr++; } (void) closedir(dirp); } else { if ((ret = cb(paths[curr], data)) != 0) break; } curr--; } free(paths); (void) close(base); return (ret); err: free(paths); (void) close(base); return (-1); } typedef struct zvol_cb { zpool_handle_t *zcb_pool; boolean_t zcb_create; } zvol_cb_t; /*ARGSUSED*/ static int do_zvol_create(zfs_handle_t *zhp, void *data) { int ret; if (ZFS_IS_VOLUME(zhp)) (void) zvol_create_link(zhp->zfs_hdl, zhp->zfs_name); ret = zfs_iter_children(zhp, do_zvol_create, NULL); zfs_close(zhp); return (ret); } /* * Iterate over all zvols in the pool and make any necessary minor nodes. */ int zpool_create_zvol_links(zpool_handle_t *zhp) { zfs_handle_t *zfp; int ret; /* * If the pool is unavailable, just return success. */ if ((zfp = make_dataset_handle(zhp->zpool_hdl, zhp->zpool_name)) == NULL) return (0); ret = zfs_iter_children(zfp, do_zvol_create, NULL); zfs_close(zfp); return (ret); } static int do_zvol_remove(const char *dataset, void *data) { zpool_handle_t *zhp = data; return (zvol_remove_link(zhp->zpool_hdl, dataset)); } /* * Iterate over all zvols in the pool and remove any minor nodes. We iterate * by examining the /dev links so that a corrupted pool doesn't impede this * operation. */ int zpool_remove_zvol_links(zpool_handle_t *zhp) { return (zpool_iter_zvol(zhp, do_zvol_remove, zhp)); } /* * Convert from a devid string to a path. */ static char * devid_to_path(char *devid_str) { ddi_devid_t devid; char *minor; char *path; devid_nmlist_t *list = NULL; int ret; if (devid_str_decode(devid_str, &devid, &minor) != 0) return (NULL); ret = devid_deviceid_to_nmlist("/dev", devid, minor, &list); devid_str_free(minor); devid_free(devid); if (ret != 0) return (NULL); if ((path = strdup(list[0].devname)) == NULL) return (NULL); devid_free_nmlist(list); return (path); } /* * Convert from a path to a devid string. */ static char * path_to_devid(const char *path) { int fd; ddi_devid_t devid; char *minor, *ret; if ((fd = open(path, O_RDONLY)) < 0) return (NULL); minor = NULL; ret = NULL; if (devid_get(fd, &devid) == 0) { if (devid_get_minor_name(fd, &minor) == 0) ret = devid_str_encode(devid, minor); if (minor != NULL) devid_str_free(minor); devid_free(devid); } (void) close(fd); return (ret); } /* * Issue the necessary ioctl() to update the stored path value for the vdev. We * ignore any failure here, since a common case is for an unprivileged user to * type 'zpool status', and we'll display the correct information anyway. */ static void set_path(zpool_handle_t *zhp, nvlist_t *nv, const char *path) { zfs_cmd_t zc = { 0 }; (void) strncpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); (void) strncpy(zc.zc_value, path, sizeof (zc.zc_value)); verify(nvlist_lookup_uint64(nv, ZPOOL_CONFIG_GUID, &zc.zc_guid) == 0); (void) ioctl(zhp->zpool_hdl->libzfs_fd, ZFS_IOC_VDEV_SETPATH, &zc); } /* * Given a vdev, return the name to display in iostat. If the vdev has a path, * we use that, stripping off any leading "/dev/dsk/"; if not, we use the type. * We also check if this is a whole disk, in which case we strip off the * trailing 's0' slice name. * * This routine is also responsible for identifying when disks have been * reconfigured in a new location. The kernel will have opened the device by * devid, but the path will still refer to the old location. To catch this, we * first do a path -> devid translation (which is fast for the common case). If * the devid matches, we're done. If not, we do a reverse devid -> path * translation and issue the appropriate ioctl() to update the path of the vdev. * If 'zhp' is NULL, then this is an exported pool, and we don't need to do any * of these checks. */ char * zpool_vdev_name(libzfs_handle_t *hdl, zpool_handle_t *zhp, nvlist_t *nv) { char *path, *devid; uint64_t value; char buf[64]; if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_NOT_PRESENT, &value) == 0) { verify(nvlist_lookup_uint64(nv, ZPOOL_CONFIG_GUID, &value) == 0); (void) snprintf(buf, sizeof (buf), "%llu", (u_longlong_t)value); path = buf; } else if (nvlist_lookup_string(nv, ZPOOL_CONFIG_PATH, &path) == 0) { if (zhp != NULL && nvlist_lookup_string(nv, ZPOOL_CONFIG_DEVID, &devid) == 0) { /* * Determine if the current path is correct. */ char *newdevid = path_to_devid(path); if (newdevid == NULL || strcmp(devid, newdevid) != 0) { char *newpath; if ((newpath = devid_to_path(devid)) != NULL) { /* * Update the path appropriately. */ set_path(zhp, nv, newpath); if (nvlist_add_string(nv, ZPOOL_CONFIG_PATH, newpath) == 0) verify(nvlist_lookup_string(nv, ZPOOL_CONFIG_PATH, &path) == 0); free(newpath); } } if (newdevid) devid_str_free(newdevid); } if (strncmp(path, "/dev/dsk/", 9) == 0) path += 9; if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_WHOLE_DISK, &value) == 0 && value) { char *tmp = zfs_strdup(hdl, path); if (tmp == NULL) return (NULL); tmp[strlen(path) - 2] = '\0'; return (tmp); } } else { verify(nvlist_lookup_string(nv, ZPOOL_CONFIG_TYPE, &path) == 0); /* * If it's a raidz device, we need to stick in the parity level. */ if (strcmp(path, VDEV_TYPE_RAIDZ) == 0) { verify(nvlist_lookup_uint64(nv, ZPOOL_CONFIG_NPARITY, &value) == 0); (void) snprintf(buf, sizeof (buf), "%s%llu", path, (u_longlong_t)value); path = buf; } } return (zfs_strdup(hdl, path)); } static int zbookmark_compare(const void *a, const void *b) { return (memcmp(a, b, sizeof (zbookmark_t))); } /* * Retrieve the persistent error log, uniquify the members, and return to the * caller. */ int zpool_get_errlog(zpool_handle_t *zhp, nvlist_t **nverrlistp) { zfs_cmd_t zc = { 0 }; uint64_t count; zbookmark_t *zb = NULL; int i; /* * Retrieve the raw error list from the kernel. If the number of errors * has increased, allocate more space and continue until we get the * entire list. */ verify(nvlist_lookup_uint64(zhp->zpool_config, ZPOOL_CONFIG_ERRCOUNT, &count) == 0); if ((zc.zc_nvlist_dst = (uintptr_t)zfs_alloc(zhp->zpool_hdl, count * sizeof (zbookmark_t))) == (uintptr_t)NULL) return (-1); zc.zc_nvlist_dst_size = count; (void) strcpy(zc.zc_name, zhp->zpool_name); for (;;) { if (ioctl(zhp->zpool_hdl->libzfs_fd, ZFS_IOC_ERROR_LOG, &zc) != 0) { free((void *)(uintptr_t)zc.zc_nvlist_dst); if (errno == ENOMEM) { if ((zc.zc_nvlist_dst = (uintptr_t) zfs_alloc(zhp->zpool_hdl, zc.zc_nvlist_dst_size)) == (uintptr_t)NULL) return (-1); } else { return (-1); } } else { break; } } /* * Sort the resulting bookmarks. This is a little confusing due to the * implementation of ZFS_IOC_ERROR_LOG. The bookmarks are copied last * to first, and 'zc_nvlist_dst_size' indicates the number of boomarks * _not_ copied as part of the process. So we point the start of our * array appropriate and decrement the total number of elements. */ zb = ((zbookmark_t *)(uintptr_t)zc.zc_nvlist_dst) + zc.zc_nvlist_dst_size; count -= zc.zc_nvlist_dst_size; qsort(zb, count, sizeof (zbookmark_t), zbookmark_compare); verify(nvlist_alloc(nverrlistp, 0, KM_SLEEP) == 0); /* * Fill in the nverrlistp with nvlist's of dataset and object numbers. */ for (i = 0; i < count; i++) { nvlist_t *nv; /* ignoring zb_blkid and zb_level for now */ if (i > 0 && zb[i-1].zb_objset == zb[i].zb_objset && zb[i-1].zb_object == zb[i].zb_object) continue; if (nvlist_alloc(&nv, NV_UNIQUE_NAME, KM_SLEEP) != 0) goto nomem; if (nvlist_add_uint64(nv, ZPOOL_ERR_DATASET, zb[i].zb_objset) != 0) { nvlist_free(nv); goto nomem; } if (nvlist_add_uint64(nv, ZPOOL_ERR_OBJECT, zb[i].zb_object) != 0) { nvlist_free(nv); goto nomem; } if (nvlist_add_nvlist(*nverrlistp, "ejk", nv) != 0) { nvlist_free(nv); goto nomem; } nvlist_free(nv); } free((void *)(uintptr_t)zc.zc_nvlist_dst); return (0); nomem: free((void *)(uintptr_t)zc.zc_nvlist_dst); return (no_memory(zhp->zpool_hdl)); } /* * Upgrade a ZFS pool to the latest on-disk version. */ int zpool_upgrade(zpool_handle_t *zhp) { zfs_cmd_t zc = { 0 }; libzfs_handle_t *hdl = zhp->zpool_hdl; (void) strcpy(zc.zc_name, zhp->zpool_name); if (ioctl(hdl->libzfs_fd, ZFS_IOC_POOL_UPGRADE, &zc) != 0) return (zpool_standard_error_fmt(hdl, errno, dgettext(TEXT_DOMAIN, "cannot upgrade '%s'"), zhp->zpool_name)); return (0); } /* * Log command history. * * 'pool' is B_TRUE if we are logging a command for 'zpool'; B_FALSE * otherwise ('zfs'). 'pool_create' is B_TRUE if we are logging the creation * of the pool; B_FALSE otherwise. 'path' is the pathanme containing the * poolname. 'argc' and 'argv' are used to construct the command string. */ void zpool_log_history(libzfs_handle_t *hdl, int argc, char **argv, const char *path, boolean_t pool, boolean_t pool_create) { char cmd_buf[HIS_MAX_RECORD_LEN]; char *dspath; zfs_cmd_t zc = { 0 }; int i; /* construct the command string */ (void) strcpy(cmd_buf, pool ? "zpool" : "zfs"); for (i = 0; i < argc; i++) { if (strlen(cmd_buf) + 1 + strlen(argv[i]) > HIS_MAX_RECORD_LEN) break; (void) strcat(cmd_buf, " "); (void) strcat(cmd_buf, argv[i]); } /* figure out the poolname */ dspath = strpbrk(path, "/@"); if (dspath == NULL) { (void) strcpy(zc.zc_name, path); } else { (void) strncpy(zc.zc_name, path, dspath - path); zc.zc_name[dspath-path] = '\0'; } zc.zc_history = (uint64_t)(uintptr_t)cmd_buf; zc.zc_history_len = strlen(cmd_buf); /* overloading zc_history_offset */ zc.zc_history_offset = pool_create; (void) ioctl(hdl->libzfs_fd, ZFS_IOC_POOL_LOG_HISTORY, &zc); } /* * Perform ioctl to get some command history of a pool. * * 'buf' is the buffer to fill up to 'len' bytes. 'off' is the * logical offset of the history buffer to start reading from. * * Upon return, 'off' is the next logical offset to read from and * 'len' is the actual amount of bytes read into 'buf'. */ static int get_history(zpool_handle_t *zhp, char *buf, uint64_t *off, uint64_t *len) { zfs_cmd_t zc = { 0 }; libzfs_handle_t *hdl = zhp->zpool_hdl; (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); zc.zc_history = (uint64_t)(uintptr_t)buf; zc.zc_history_len = *len; zc.zc_history_offset = *off; if (ioctl(hdl->libzfs_fd, ZFS_IOC_POOL_GET_HISTORY, &zc) != 0) { switch (errno) { case EPERM: return (zfs_error_fmt(hdl, EZFS_PERM, dgettext(TEXT_DOMAIN, "cannot show history for pool '%s'"), zhp->zpool_name)); case ENOENT: return (zfs_error_fmt(hdl, EZFS_NOHISTORY, dgettext(TEXT_DOMAIN, "cannot get history for pool " "'%s'"), zhp->zpool_name)); default: return (zpool_standard_error_fmt(hdl, errno, dgettext(TEXT_DOMAIN, "cannot get history for '%s'"), zhp->zpool_name)); } } *len = zc.zc_history_len; *off = zc.zc_history_offset; return (0); } /* * Process the buffer of nvlists, unpacking and storing each nvlist record * into 'records'. 'leftover' is set to the number of bytes that weren't * processed as there wasn't a complete record. */ static int zpool_history_unpack(char *buf, uint64_t bytes_read, uint64_t *leftover, nvlist_t ***records, uint_t *numrecords) { uint64_t reclen; nvlist_t *nv; int i; while (bytes_read > sizeof (reclen)) { /* get length of packed record (stored as little endian) */ for (i = 0, reclen = 0; i < sizeof (reclen); i++) reclen += (uint64_t)(((uchar_t *)buf)[i]) << (8*i); if (bytes_read < sizeof (reclen) + reclen) break; /* unpack record */ if (nvlist_unpack(buf + sizeof (reclen), reclen, &nv, 0) != 0) return (ENOMEM); bytes_read -= sizeof (reclen) + reclen; buf += sizeof (reclen) + reclen; /* add record to nvlist array */ (*numrecords)++; if (ISP2(*numrecords + 1)) { *records = realloc(*records, *numrecords * 2 * sizeof (nvlist_t *)); } (*records)[*numrecords - 1] = nv; } *leftover = bytes_read; return (0); } #define HIS_BUF_LEN (128*1024) /* * Retrieve the command history of a pool. */ int zpool_get_history(zpool_handle_t *zhp, nvlist_t **nvhisp) { char buf[HIS_BUF_LEN]; uint64_t off = 0; nvlist_t **records = NULL; uint_t numrecords = 0; int err, i; do { uint64_t bytes_read = sizeof (buf); uint64_t leftover; if ((err = get_history(zhp, buf, &off, &bytes_read)) != 0) break; /* if nothing else was read in, we're at EOF, just return */ if (!bytes_read) break; if ((err = zpool_history_unpack(buf, bytes_read, &leftover, &records, &numrecords)) != 0) break; off -= leftover; /* CONSTCOND */ } while (1); if (!err) { verify(nvlist_alloc(nvhisp, NV_UNIQUE_NAME, 0) == 0); verify(nvlist_add_nvlist_array(*nvhisp, ZPOOL_HIST_RECORD, records, numrecords) == 0); } for (i = 0; i < numrecords; i++) nvlist_free(records[i]); free(records); return (err); } void zpool_obj_to_path(zpool_handle_t *zhp, uint64_t dsobj, uint64_t obj, char *pathname, size_t len) { zfs_cmd_t zc = { 0 }; boolean_t mounted = B_FALSE; char *mntpnt = NULL; char dsname[MAXNAMELEN]; if (dsobj == 0) { /* special case for the MOS */ (void) snprintf(pathname, len, ":<0x%llx>", obj); return; } /* get the dataset's name */ (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); zc.zc_obj = dsobj; if (ioctl(zhp->zpool_hdl->libzfs_fd, ZFS_IOC_DSOBJ_TO_DSNAME, &zc) != 0) { /* just write out a path of two object numbers */ (void) snprintf(pathname, len, "<0x%llx>:<0x%llx>", dsobj, obj); return; } (void) strlcpy(dsname, zc.zc_value, sizeof (dsname)); /* find out if the dataset is mounted */ mounted = is_mounted(zhp->zpool_hdl, dsname, &mntpnt); /* get the corrupted object's path */ (void) strlcpy(zc.zc_name, dsname, sizeof (zc.zc_name)); zc.zc_obj = obj; if (ioctl(zhp->zpool_hdl->libzfs_fd, ZFS_IOC_OBJ_TO_PATH, &zc) == 0) { if (mounted) { (void) snprintf(pathname, len, "%s%s", mntpnt, zc.zc_value); } else { (void) snprintf(pathname, len, "%s:%s", dsname, zc.zc_value); } } else { (void) snprintf(pathname, len, "%s:<0x%llx>", dsname, obj); } free(mntpnt); }