/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include "zfs_namecheck.h" #include "zfs_prop.h" #include "libzfs_impl.h" #include "zfs_comutil.h" static int read_efi_label(nvlist_t *config, diskaddr_t *sb); #define DISK_ROOT "/dev/dsk" #define RDISK_ROOT "/dev/rdsk" #define BACKUP_SLICE "s2" /* * ==================================================================== * zpool property functions * ==================================================================== */ static int zpool_get_all_props(zpool_handle_t *zhp) { zfs_cmd_t zc = { 0 }; libzfs_handle_t *hdl = zhp->zpool_hdl; (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); if (zcmd_alloc_dst_nvlist(hdl, &zc, 0) != 0) return (-1); while (ioctl(hdl->libzfs_fd, ZFS_IOC_POOL_GET_PROPS, &zc) != 0) { if (errno == ENOMEM) { if (zcmd_expand_dst_nvlist(hdl, &zc) != 0) { zcmd_free_nvlists(&zc); return (-1); } } else { zcmd_free_nvlists(&zc); return (-1); } } if (zcmd_read_dst_nvlist(hdl, &zc, &zhp->zpool_props) != 0) { zcmd_free_nvlists(&zc); return (-1); } zcmd_free_nvlists(&zc); return (0); } static int zpool_props_refresh(zpool_handle_t *zhp) { nvlist_t *old_props; old_props = zhp->zpool_props; if (zpool_get_all_props(zhp) != 0) return (-1); nvlist_free(old_props); return (0); } static char * zpool_get_prop_string(zpool_handle_t *zhp, zpool_prop_t prop, zprop_source_t *src) { nvlist_t *nv, *nvl; uint64_t ival; char *value; zprop_source_t source; nvl = zhp->zpool_props; if (nvlist_lookup_nvlist(nvl, zpool_prop_to_name(prop), &nv) == 0) { verify(nvlist_lookup_uint64(nv, ZPROP_SOURCE, &ival) == 0); source = ival; verify(nvlist_lookup_string(nv, ZPROP_VALUE, &value) == 0); } else { source = ZPROP_SRC_DEFAULT; if ((value = (char *)zpool_prop_default_string(prop)) == NULL) value = "-"; } if (src) *src = source; return (value); } uint64_t zpool_get_prop_int(zpool_handle_t *zhp, zpool_prop_t prop, zprop_source_t *src) { nvlist_t *nv, *nvl; uint64_t value; zprop_source_t source; if (zhp->zpool_props == NULL && zpool_get_all_props(zhp)) { /* * zpool_get_all_props() has most likely failed because * the pool is faulted, but if all we need is the top level * vdev's guid then get it from the zhp config nvlist. */ if ((prop == ZPOOL_PROP_GUID) && (nvlist_lookup_nvlist(zhp->zpool_config, ZPOOL_CONFIG_VDEV_TREE, &nv) == 0) && (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_GUID, &value) == 0)) { return (value); } return (zpool_prop_default_numeric(prop)); } nvl = zhp->zpool_props; if (nvlist_lookup_nvlist(nvl, zpool_prop_to_name(prop), &nv) == 0) { verify(nvlist_lookup_uint64(nv, ZPROP_SOURCE, &value) == 0); source = value; verify(nvlist_lookup_uint64(nv, ZPROP_VALUE, &value) == 0); } else { source = ZPROP_SRC_DEFAULT; value = zpool_prop_default_numeric(prop); } if (src) *src = source; return (value); } /* * Map VDEV STATE to printed strings. */ char * zpool_state_to_name(vdev_state_t state, vdev_aux_t aux) { switch (state) { case VDEV_STATE_CLOSED: case VDEV_STATE_OFFLINE: return (gettext("OFFLINE")); case VDEV_STATE_REMOVED: return (gettext("REMOVED")); case VDEV_STATE_CANT_OPEN: if (aux == VDEV_AUX_CORRUPT_DATA || aux == VDEV_AUX_BAD_LOG) return (gettext("FAULTED")); else if (aux == VDEV_AUX_SPLIT_POOL) return (gettext("SPLIT")); else return (gettext("UNAVAIL")); case VDEV_STATE_FAULTED: return (gettext("FAULTED")); case VDEV_STATE_DEGRADED: return (gettext("DEGRADED")); case VDEV_STATE_HEALTHY: return (gettext("ONLINE")); } return (gettext("UNKNOWN")); } /* * Get a zpool property value for 'prop' and return the value in * a pre-allocated buffer. */ int zpool_get_prop(zpool_handle_t *zhp, zpool_prop_t prop, char *buf, size_t len, zprop_source_t *srctype) { uint64_t intval; const char *strval; zprop_source_t src = ZPROP_SRC_NONE; nvlist_t *nvroot; vdev_stat_t *vs; uint_t vsc; if (zpool_get_state(zhp) == POOL_STATE_UNAVAIL) { switch (prop) { case ZPOOL_PROP_NAME: (void) strlcpy(buf, zpool_get_name(zhp), len); break; case ZPOOL_PROP_HEALTH: (void) strlcpy(buf, "FAULTED", len); break; case ZPOOL_PROP_GUID: intval = zpool_get_prop_int(zhp, prop, &src); (void) snprintf(buf, len, "%llu", intval); break; case ZPOOL_PROP_ALTROOT: case ZPOOL_PROP_CACHEFILE: if (zhp->zpool_props != NULL || zpool_get_all_props(zhp) == 0) { (void) strlcpy(buf, zpool_get_prop_string(zhp, prop, &src), len); if (srctype != NULL) *srctype = src; return (0); } /* FALLTHROUGH */ default: (void) strlcpy(buf, "-", len); break; } if (srctype != NULL) *srctype = src; return (0); } if (zhp->zpool_props == NULL && zpool_get_all_props(zhp) && prop != ZPOOL_PROP_NAME) return (-1); switch (zpool_prop_get_type(prop)) { case PROP_TYPE_STRING: (void) strlcpy(buf, zpool_get_prop_string(zhp, prop, &src), len); break; case PROP_TYPE_NUMBER: intval = zpool_get_prop_int(zhp, prop, &src); switch (prop) { case ZPOOL_PROP_SIZE: case ZPOOL_PROP_ALLOCATED: case ZPOOL_PROP_FREE: (void) zfs_nicenum(intval, buf, len); break; case ZPOOL_PROP_CAPACITY: (void) snprintf(buf, len, "%llu%%", (u_longlong_t)intval); break; case ZPOOL_PROP_DEDUPRATIO: (void) snprintf(buf, len, "%llu.%02llux", (u_longlong_t)(intval / 100), (u_longlong_t)(intval % 100)); break; case ZPOOL_PROP_HEALTH: verify(nvlist_lookup_nvlist(zpool_get_config(zhp, NULL), ZPOOL_CONFIG_VDEV_TREE, &nvroot) == 0); verify(nvlist_lookup_uint64_array(nvroot, ZPOOL_CONFIG_VDEV_STATS, (uint64_t **)&vs, &vsc) == 0); (void) strlcpy(buf, zpool_state_to_name(intval, vs->vs_aux), len); break; default: (void) snprintf(buf, len, "%llu", intval); } break; case PROP_TYPE_INDEX: intval = zpool_get_prop_int(zhp, prop, &src); if (zpool_prop_index_to_string(prop, intval, &strval) != 0) return (-1); (void) strlcpy(buf, strval, len); break; default: abort(); } if (srctype) *srctype = src; return (0); } /* * Check if the bootfs name has the same pool name as it is set to. * Assuming bootfs is a valid dataset name. */ static boolean_t bootfs_name_valid(const char *pool, char *bootfs) { int len = strlen(pool); if (!zfs_name_valid(bootfs, ZFS_TYPE_FILESYSTEM|ZFS_TYPE_SNAPSHOT)) return (B_FALSE); if (strncmp(pool, bootfs, len) == 0 && (bootfs[len] == '/' || bootfs[len] == '\0')) return (B_TRUE); return (B_FALSE); } /* * Inspect the configuration to determine if any of the devices contain * an EFI label. */ static boolean_t pool_uses_efi(nvlist_t *config) { nvlist_t **child; uint_t c, children; if (nvlist_lookup_nvlist_array(config, ZPOOL_CONFIG_CHILDREN, &child, &children) != 0) return (read_efi_label(config, NULL) >= 0); for (c = 0; c < children; c++) { if (pool_uses_efi(child[c])) return (B_TRUE); } return (B_FALSE); } static boolean_t pool_is_bootable(zpool_handle_t *zhp) { char bootfs[ZPOOL_MAXNAMELEN]; return (zpool_get_prop(zhp, ZPOOL_PROP_BOOTFS, bootfs, sizeof (bootfs), NULL) == 0 && strncmp(bootfs, "-", sizeof (bootfs)) != 0); } /* * Given an nvlist of zpool properties to be set, validate that they are * correct, and parse any numeric properties (index, boolean, etc) if they are * specified as strings. */ static nvlist_t * zpool_valid_proplist(libzfs_handle_t *hdl, const char *poolname, nvlist_t *props, uint64_t version, boolean_t create_or_import, char *errbuf) { nvpair_t *elem; nvlist_t *retprops; zpool_prop_t prop; char *strval; uint64_t intval; char *slash; struct stat64 statbuf; zpool_handle_t *zhp; nvlist_t *nvroot; if (nvlist_alloc(&retprops, NV_UNIQUE_NAME, 0) != 0) { (void) no_memory(hdl); return (NULL); } elem = NULL; while ((elem = nvlist_next_nvpair(props, elem)) != NULL) { const char *propname = nvpair_name(elem); /* * Make sure this property is valid and applies to this type. */ if ((prop = zpool_name_to_prop(propname)) == ZPROP_INVAL) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "invalid property '%s'"), propname); (void) zfs_error(hdl, EZFS_BADPROP, errbuf); goto error; } if (zpool_prop_readonly(prop)) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "'%s' " "is readonly"), propname); (void) zfs_error(hdl, EZFS_PROPREADONLY, errbuf); goto error; } if (zprop_parse_value(hdl, elem, prop, ZFS_TYPE_POOL, retprops, &strval, &intval, errbuf) != 0) goto error; /* * Perform additional checking for specific properties. */ switch (prop) { case ZPOOL_PROP_VERSION: if (intval < version || intval > SPA_VERSION) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "property '%s' number %d is invalid."), propname, intval); (void) zfs_error(hdl, EZFS_BADVERSION, errbuf); goto error; } break; case ZPOOL_PROP_BOOTFS: if (create_or_import) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "property '%s' cannot be set at creation " "or import time"), propname); (void) zfs_error(hdl, EZFS_BADPROP, errbuf); goto error; } if (version < SPA_VERSION_BOOTFS) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "pool must be upgraded to support " "'%s' property"), propname); (void) zfs_error(hdl, EZFS_BADVERSION, errbuf); goto error; } /* * bootfs property value has to be a dataset name and * the dataset has to be in the same pool as it sets to. */ if (strval[0] != '\0' && !bootfs_name_valid(poolname, strval)) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "'%s' " "is an invalid name"), strval); (void) zfs_error(hdl, EZFS_INVALIDNAME, errbuf); goto error; } if ((zhp = zpool_open_canfail(hdl, poolname)) == NULL) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "could not open pool '%s'"), poolname); (void) zfs_error(hdl, EZFS_OPENFAILED, errbuf); goto error; } verify(nvlist_lookup_nvlist(zpool_get_config(zhp, NULL), ZPOOL_CONFIG_VDEV_TREE, &nvroot) == 0); /* * bootfs property cannot be set on a disk which has * been EFI labeled. */ if (pool_uses_efi(nvroot)) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "property '%s' not supported on " "EFI labeled devices"), propname); (void) zfs_error(hdl, EZFS_POOL_NOTSUP, errbuf); zpool_close(zhp); goto error; } zpool_close(zhp); break; case ZPOOL_PROP_ALTROOT: if (!create_or_import) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "property '%s' can only be set during pool " "creation or import"), propname); (void) zfs_error(hdl, EZFS_BADPROP, errbuf); goto error; } if (strval[0] != '/') { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "bad alternate root '%s'"), strval); (void) zfs_error(hdl, EZFS_BADPATH, errbuf); goto error; } break; case ZPOOL_PROP_CACHEFILE: if (strval[0] == '\0') break; if (strcmp(strval, "none") == 0) break; if (strval[0] != '/') { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "property '%s' must be empty, an " "absolute path, or 'none'"), propname); (void) zfs_error(hdl, EZFS_BADPATH, errbuf); goto error; } slash = strrchr(strval, '/'); if (slash[1] == '\0' || strcmp(slash, "/.") == 0 || strcmp(slash, "/..") == 0) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "'%s' is not a valid file"), strval); (void) zfs_error(hdl, EZFS_BADPATH, errbuf); goto error; } *slash = '\0'; if (strval[0] != '\0' && (stat64(strval, &statbuf) != 0 || !S_ISDIR(statbuf.st_mode))) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "'%s' is not a valid directory"), strval); (void) zfs_error(hdl, EZFS_BADPATH, errbuf); goto error; } *slash = '/'; break; } } return (retprops); error: nvlist_free(retprops); return (NULL); } /* * Set zpool property : propname=propval. */ int zpool_set_prop(zpool_handle_t *zhp, const char *propname, const char *propval) { zfs_cmd_t zc = { 0 }; int ret = -1; char errbuf[1024]; nvlist_t *nvl = NULL; nvlist_t *realprops; uint64_t version; (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot set property for '%s'"), zhp->zpool_name); if (nvlist_alloc(&nvl, NV_UNIQUE_NAME, 0) != 0) return (no_memory(zhp->zpool_hdl)); if (nvlist_add_string(nvl, propname, propval) != 0) { nvlist_free(nvl); return (no_memory(zhp->zpool_hdl)); } version = zpool_get_prop_int(zhp, ZPOOL_PROP_VERSION, NULL); if ((realprops = zpool_valid_proplist(zhp->zpool_hdl, zhp->zpool_name, nvl, version, B_FALSE, errbuf)) == NULL) { nvlist_free(nvl); return (-1); } nvlist_free(nvl); nvl = realprops; /* * Execute the corresponding ioctl() to set this property. */ (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); if (zcmd_write_src_nvlist(zhp->zpool_hdl, &zc, nvl) != 0) { nvlist_free(nvl); return (-1); } ret = zfs_ioctl(zhp->zpool_hdl, ZFS_IOC_POOL_SET_PROPS, &zc); zcmd_free_nvlists(&zc); nvlist_free(nvl); if (ret) (void) zpool_standard_error(zhp->zpool_hdl, errno, errbuf); else (void) zpool_props_refresh(zhp); return (ret); } int zpool_expand_proplist(zpool_handle_t *zhp, zprop_list_t **plp) { libzfs_handle_t *hdl = zhp->zpool_hdl; zprop_list_t *entry; char buf[ZFS_MAXPROPLEN]; if (zprop_expand_list(hdl, plp, ZFS_TYPE_POOL) != 0) return (-1); for (entry = *plp; entry != NULL; entry = entry->pl_next) { if (entry->pl_fixed) continue; if (entry->pl_prop != ZPROP_INVAL && zpool_get_prop(zhp, entry->pl_prop, buf, sizeof (buf), NULL) == 0) { if (strlen(buf) > entry->pl_width) entry->pl_width = strlen(buf); } } return (0); } /* * Don't start the slice at the default block of 34; many storage * devices will use a stripe width of 128k, so start there instead. */ #define NEW_START_BLOCK 256 /* * Validate the given pool name, optionally putting an extended error message in * 'buf'. */ boolean_t zpool_name_valid(libzfs_handle_t *hdl, boolean_t isopen, const char *pool) { namecheck_err_t why; char what; int ret; ret = pool_namecheck(pool, &why, &what); /* * The rules for reserved pool names were extended at a later point. * But we need to support users with existing pools that may now be * invalid. So we only check for this expanded set of names during a * create (or import), and only in userland. */ if (ret == 0 && !isopen && (strncmp(pool, "mirror", 6) == 0 || strncmp(pool, "raidz", 5) == 0 || strncmp(pool, "spare", 5) == 0 || strcmp(pool, "log") == 0)) { if (hdl != NULL) zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "name is reserved")); return (B_FALSE); } if (ret != 0) { if (hdl != NULL) { switch (why) { case NAME_ERR_TOOLONG: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "name is too long")); break; case NAME_ERR_INVALCHAR: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "invalid character " "'%c' in pool name"), what); break; case NAME_ERR_NOLETTER: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "name must begin with a letter")); break; case NAME_ERR_RESERVED: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "name is reserved")); break; case NAME_ERR_DISKLIKE: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "pool name is reserved")); break; case NAME_ERR_LEADING_SLASH: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "leading slash in name")); break; case NAME_ERR_EMPTY_COMPONENT: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "empty component in name")); break; case NAME_ERR_TRAILING_SLASH: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "trailing slash in name")); break; case NAME_ERR_MULTIPLE_AT: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "multiple '@' delimiters in name")); break; } } return (B_FALSE); } return (B_TRUE); } /* * Open a handle to the given pool, even if the pool is currently in the FAULTED * state. */ zpool_handle_t * zpool_open_canfail(libzfs_handle_t *hdl, const char *pool) { zpool_handle_t *zhp; boolean_t missing; /* * Make sure the pool name is valid. */ if (!zpool_name_valid(hdl, B_TRUE, pool)) { (void) zfs_error_fmt(hdl, EZFS_INVALIDNAME, dgettext(TEXT_DOMAIN, "cannot open '%s'"), pool); return (NULL); } if ((zhp = zfs_alloc(hdl, sizeof (zpool_handle_t))) == NULL) return (NULL); zhp->zpool_hdl = hdl; (void) strlcpy(zhp->zpool_name, pool, sizeof (zhp->zpool_name)); if (zpool_refresh_stats(zhp, &missing) != 0) { zpool_close(zhp); return (NULL); } if (missing) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "no such pool")); (void) zfs_error_fmt(hdl, EZFS_NOENT, dgettext(TEXT_DOMAIN, "cannot open '%s'"), pool); zpool_close(zhp); return (NULL); } return (zhp); } /* * Like the above, but silent on error. Used when iterating over pools (because * the configuration cache may be out of date). */ int zpool_open_silent(libzfs_handle_t *hdl, const char *pool, zpool_handle_t **ret) { zpool_handle_t *zhp; boolean_t missing; if ((zhp = zfs_alloc(hdl, sizeof (zpool_handle_t))) == NULL) return (-1); zhp->zpool_hdl = hdl; (void) strlcpy(zhp->zpool_name, pool, sizeof (zhp->zpool_name)); if (zpool_refresh_stats(zhp, &missing) != 0) { zpool_close(zhp); return (-1); } if (missing) { zpool_close(zhp); *ret = NULL; return (0); } *ret = zhp; return (0); } /* * Similar to zpool_open_canfail(), but refuses to open pools in the faulted * state. */ zpool_handle_t * zpool_open(libzfs_handle_t *hdl, const char *pool) { zpool_handle_t *zhp; if ((zhp = zpool_open_canfail(hdl, pool)) == NULL) return (NULL); if (zhp->zpool_state == POOL_STATE_UNAVAIL) { (void) zfs_error_fmt(hdl, EZFS_POOLUNAVAIL, dgettext(TEXT_DOMAIN, "cannot open '%s'"), zhp->zpool_name); zpool_close(zhp); return (NULL); } return (zhp); } /* * Close the handle. Simply frees the memory associated with the handle. */ void zpool_close(zpool_handle_t *zhp) { if (zhp->zpool_config) nvlist_free(zhp->zpool_config); if (zhp->zpool_old_config) nvlist_free(zhp->zpool_old_config); if (zhp->zpool_props) nvlist_free(zhp->zpool_props); free(zhp); } /* * Return the name of the pool. */ const char * zpool_get_name(zpool_handle_t *zhp) { return (zhp->zpool_name); } /* * Return the state of the pool (ACTIVE or UNAVAILABLE) */ int zpool_get_state(zpool_handle_t *zhp) { return (zhp->zpool_state); } /* * Create the named pool, using the provided vdev list. It is assumed * that the consumer has already validated the contents of the nvlist, so we * don't have to worry about error semantics. */ int zpool_create(libzfs_handle_t *hdl, const char *pool, nvlist_t *nvroot, nvlist_t *props, nvlist_t *fsprops) { zfs_cmd_t zc = { 0 }; nvlist_t *zc_fsprops = NULL; nvlist_t *zc_props = NULL; char msg[1024]; char *altroot; int ret = -1; (void) snprintf(msg, sizeof (msg), dgettext(TEXT_DOMAIN, "cannot create '%s'"), pool); if (!zpool_name_valid(hdl, B_FALSE, pool)) return (zfs_error(hdl, EZFS_INVALIDNAME, msg)); if (zcmd_write_conf_nvlist(hdl, &zc, nvroot) != 0) return (-1); if (props) { if ((zc_props = zpool_valid_proplist(hdl, pool, props, SPA_VERSION_1, B_TRUE, msg)) == NULL) { goto create_failed; } } if (fsprops) { uint64_t zoned; char *zonestr; zoned = ((nvlist_lookup_string(fsprops, zfs_prop_to_name(ZFS_PROP_ZONED), &zonestr) == 0) && strcmp(zonestr, "on") == 0); if ((zc_fsprops = zfs_valid_proplist(hdl, ZFS_TYPE_FILESYSTEM, fsprops, zoned, NULL, msg)) == NULL) { goto create_failed; } if (!zc_props && (nvlist_alloc(&zc_props, NV_UNIQUE_NAME, 0) != 0)) { goto create_failed; } if (nvlist_add_nvlist(zc_props, ZPOOL_ROOTFS_PROPS, zc_fsprops) != 0) { goto create_failed; } } if (zc_props && zcmd_write_src_nvlist(hdl, &zc, zc_props) != 0) goto create_failed; (void) strlcpy(zc.zc_name, pool, sizeof (zc.zc_name)); if ((ret = zfs_ioctl(hdl, ZFS_IOC_POOL_CREATE, &zc)) != 0) { zcmd_free_nvlists(&zc); nvlist_free(zc_props); nvlist_free(zc_fsprops); switch (errno) { case EBUSY: /* * This can happen if the user has specified the same * device multiple times. We can't reliably detect this * until we try to add it and see we already have a * label. */ zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "one or more vdevs refer to the same device")); return (zfs_error(hdl, EZFS_BADDEV, msg)); case EOVERFLOW: /* * This occurs when one of the devices is below * SPA_MINDEVSIZE. Unfortunately, we can't detect which * device was the problem device since there's no * reliable way to determine device size from userland. */ { char buf[64]; zfs_nicenum(SPA_MINDEVSIZE, buf, sizeof (buf)); zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "one or more devices is less than the " "minimum size (%s)"), buf); } return (zfs_error(hdl, EZFS_BADDEV, msg)); case ENOSPC: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "one or more devices is out of space")); return (zfs_error(hdl, EZFS_BADDEV, msg)); case ENOTBLK: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "cache device must be a disk or disk slice")); return (zfs_error(hdl, EZFS_BADDEV, msg)); default: return (zpool_standard_error(hdl, errno, msg)); } } /* * If this is an alternate root pool, then we automatically set the * mountpoint of the root dataset to be '/'. */ if (nvlist_lookup_string(props, zpool_prop_to_name(ZPOOL_PROP_ALTROOT), &altroot) == 0) { zfs_handle_t *zhp; verify((zhp = zfs_open(hdl, pool, ZFS_TYPE_DATASET)) != NULL); verify(zfs_prop_set(zhp, zfs_prop_to_name(ZFS_PROP_MOUNTPOINT), "/") == 0); zfs_close(zhp); } create_failed: zcmd_free_nvlists(&zc); nvlist_free(zc_props); nvlist_free(zc_fsprops); return (ret); } /* * Destroy the given pool. It is up to the caller to ensure that there are no * datasets left in the pool. */ int zpool_destroy(zpool_handle_t *zhp) { zfs_cmd_t zc = { 0 }; zfs_handle_t *zfp = NULL; libzfs_handle_t *hdl = zhp->zpool_hdl; char msg[1024]; if (zhp->zpool_state == POOL_STATE_ACTIVE && (zfp = zfs_open(zhp->zpool_hdl, zhp->zpool_name, ZFS_TYPE_FILESYSTEM)) == NULL) return (-1); (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); if (zfs_ioctl(zhp->zpool_hdl, ZFS_IOC_POOL_DESTROY, &zc) != 0) { (void) snprintf(msg, sizeof (msg), dgettext(TEXT_DOMAIN, "cannot destroy '%s'"), zhp->zpool_name); if (errno == EROFS) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "one or more devices is read only")); (void) zfs_error(hdl, EZFS_BADDEV, msg); } else { (void) zpool_standard_error(hdl, errno, msg); } if (zfp) zfs_close(zfp); return (-1); } if (zfp) { remove_mountpoint(zfp); zfs_close(zfp); } return (0); } /* * Add the given vdevs to the pool. The caller must have already performed the * necessary verification to ensure that the vdev specification is well-formed. */ int zpool_add(zpool_handle_t *zhp, nvlist_t *nvroot) { zfs_cmd_t zc = { 0 }; int ret; libzfs_handle_t *hdl = zhp->zpool_hdl; char msg[1024]; nvlist_t **spares, **l2cache; uint_t nspares, nl2cache; (void) snprintf(msg, sizeof (msg), dgettext(TEXT_DOMAIN, "cannot add to '%s'"), zhp->zpool_name); if (zpool_get_prop_int(zhp, ZPOOL_PROP_VERSION, NULL) < SPA_VERSION_SPARES && nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_SPARES, &spares, &nspares) == 0) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "pool must be " "upgraded to add hot spares")); return (zfs_error(hdl, EZFS_BADVERSION, msg)); } if (pool_is_bootable(zhp) && nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_SPARES, &spares, &nspares) == 0) { uint64_t s; for (s = 0; s < nspares; s++) { char *path; if (nvlist_lookup_string(spares[s], ZPOOL_CONFIG_PATH, &path) == 0 && pool_uses_efi(spares[s])) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "device '%s' contains an EFI label and " "cannot be used on root pools."), zpool_vdev_name(hdl, NULL, spares[s], B_FALSE)); return (zfs_error(hdl, EZFS_POOL_NOTSUP, msg)); } } } if (zpool_get_prop_int(zhp, ZPOOL_PROP_VERSION, NULL) < SPA_VERSION_L2CACHE && nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_L2CACHE, &l2cache, &nl2cache) == 0) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "pool must be " "upgraded to add cache devices")); return (zfs_error(hdl, EZFS_BADVERSION, msg)); } if (zcmd_write_conf_nvlist(hdl, &zc, nvroot) != 0) return (-1); (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); if (zfs_ioctl(zhp->zpool_hdl, ZFS_IOC_VDEV_ADD, &zc) != 0) { switch (errno) { case EBUSY: /* * This can happen if the user has specified the same * device multiple times. We can't reliably detect this * until we try to add it and see we already have a * label. */ zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "one or more vdevs refer to the same device")); (void) zfs_error(hdl, EZFS_BADDEV, msg); break; case EOVERFLOW: /* * This occurrs when one of the devices is below * SPA_MINDEVSIZE. Unfortunately, we can't detect which * device was the problem device since there's no * reliable way to determine device size from userland. */ { char buf[64]; zfs_nicenum(SPA_MINDEVSIZE, buf, sizeof (buf)); zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "device is less than the minimum " "size (%s)"), buf); } (void) zfs_error(hdl, EZFS_BADDEV, msg); break; case ENOTSUP: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "pool must be upgraded to add these vdevs")); (void) zfs_error(hdl, EZFS_BADVERSION, msg); break; case EDOM: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "root pool can not have multiple vdevs" " or separate logs")); (void) zfs_error(hdl, EZFS_POOL_NOTSUP, msg); break; case ENOTBLK: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "cache device must be a disk or disk slice")); (void) zfs_error(hdl, EZFS_BADDEV, msg); break; default: (void) zpool_standard_error(hdl, errno, msg); } ret = -1; } else { ret = 0; } zcmd_free_nvlists(&zc); return (ret); } /* * Exports the pool from the system. The caller must ensure that there are no * mounted datasets in the pool. */ int zpool_export_common(zpool_handle_t *zhp, boolean_t force, boolean_t hardforce) { zfs_cmd_t zc = { 0 }; char msg[1024]; (void) snprintf(msg, sizeof (msg), dgettext(TEXT_DOMAIN, "cannot export '%s'"), zhp->zpool_name); (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); zc.zc_cookie = force; zc.zc_guid = hardforce; if (zfs_ioctl(zhp->zpool_hdl, ZFS_IOC_POOL_EXPORT, &zc) != 0) { switch (errno) { case EXDEV: zfs_error_aux(zhp->zpool_hdl, dgettext(TEXT_DOMAIN, "use '-f' to override the following errors:\n" "'%s' has an active shared spare which could be" " used by other pools once '%s' is exported."), zhp->zpool_name, zhp->zpool_name); return (zfs_error(zhp->zpool_hdl, EZFS_ACTIVE_SPARE, msg)); default: return (zpool_standard_error_fmt(zhp->zpool_hdl, errno, msg)); } } return (0); } int zpool_export(zpool_handle_t *zhp, boolean_t force) { return (zpool_export_common(zhp, force, B_FALSE)); } int zpool_export_force(zpool_handle_t *zhp) { return (zpool_export_common(zhp, B_TRUE, B_TRUE)); } static void zpool_rewind_exclaim(libzfs_handle_t *hdl, const char *name, boolean_t dryrun, nvlist_t *config) { nvlist_t *nv = NULL; uint64_t rewindto; int64_t loss = -1; struct tm t; char timestr[128]; if (!hdl->libzfs_printerr || config == NULL) return; if (nvlist_lookup_nvlist(config, ZPOOL_CONFIG_LOAD_INFO, &nv) != 0) return; if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_LOAD_TIME, &rewindto) != 0) return; (void) nvlist_lookup_int64(nv, ZPOOL_CONFIG_REWIND_TIME, &loss); if (localtime_r((time_t *)&rewindto, &t) != NULL && strftime(timestr, 128, 0, &t) != 0) { if (dryrun) { (void) printf(dgettext(TEXT_DOMAIN, "Would be able to return %s " "to its state as of %s.\n"), name, timestr); } else { (void) printf(dgettext(TEXT_DOMAIN, "Pool %s returned to its state as of %s.\n"), name, timestr); } if (loss > 120) { (void) printf(dgettext(TEXT_DOMAIN, "%s approximately %lld "), dryrun ? "Would discard" : "Discarded", (loss + 30) / 60); (void) printf(dgettext(TEXT_DOMAIN, "minutes of transactions.\n")); } else if (loss > 0) { (void) printf(dgettext(TEXT_DOMAIN, "%s approximately %lld "), dryrun ? "Would discard" : "Discarded", loss); (void) printf(dgettext(TEXT_DOMAIN, "seconds of transactions.\n")); } } } void zpool_explain_recover(libzfs_handle_t *hdl, const char *name, int reason, nvlist_t *config) { nvlist_t *nv = NULL; int64_t loss = -1; uint64_t edata = UINT64_MAX; uint64_t rewindto; struct tm t; char timestr[128]; if (!hdl->libzfs_printerr) return; if (reason >= 0) (void) printf(dgettext(TEXT_DOMAIN, "action: ")); else (void) printf(dgettext(TEXT_DOMAIN, "\t")); /* All attempted rewinds failed if ZPOOL_CONFIG_LOAD_TIME missing */ if (nvlist_lookup_nvlist(config, ZPOOL_CONFIG_LOAD_INFO, &nv) != 0 || nvlist_lookup_uint64(nv, ZPOOL_CONFIG_LOAD_TIME, &rewindto) != 0) goto no_info; (void) nvlist_lookup_int64(nv, ZPOOL_CONFIG_REWIND_TIME, &loss); (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_LOAD_DATA_ERRORS, &edata); (void) printf(dgettext(TEXT_DOMAIN, "Recovery is possible, but will result in some data loss.\n")); if (localtime_r((time_t *)&rewindto, &t) != NULL && strftime(timestr, 128, 0, &t) != 0) { (void) printf(dgettext(TEXT_DOMAIN, "\tReturning the pool to its state as of %s\n" "\tshould correct the problem. "), timestr); } else { (void) printf(dgettext(TEXT_DOMAIN, "\tReverting the pool to an earlier state " "should correct the problem.\n\t")); } if (loss > 120) { (void) printf(dgettext(TEXT_DOMAIN, "Approximately %lld minutes of data\n" "\tmust be discarded, irreversibly. "), (loss + 30) / 60); } else if (loss > 0) { (void) printf(dgettext(TEXT_DOMAIN, "Approximately %lld seconds of data\n" "\tmust be discarded, irreversibly. "), loss); } if (edata != 0 && edata != UINT64_MAX) { if (edata == 1) { (void) printf(dgettext(TEXT_DOMAIN, "After rewind, at least\n" "\tone persistent user-data error will remain. ")); } else { (void) printf(dgettext(TEXT_DOMAIN, "After rewind, several\n" "\tpersistent user-data errors will remain. ")); } } (void) printf(dgettext(TEXT_DOMAIN, "Recovery can be attempted\n\tby executing 'zpool %s -F %s'. "), reason >= 0 ? "clear" : "import", name); (void) printf(dgettext(TEXT_DOMAIN, "A scrub of the pool\n" "\tis strongly recommended after recovery.\n")); return; no_info: (void) printf(dgettext(TEXT_DOMAIN, "Destroy and re-create the pool from\n\ta backup source.\n")); } /* * zpool_import() is a contracted interface. Should be kept the same * if possible. * * Applications should use zpool_import_props() to import a pool with * new properties value to be set. */ int zpool_import(libzfs_handle_t *hdl, nvlist_t *config, const char *newname, char *altroot) { nvlist_t *props = NULL; int ret; if (altroot != NULL) { if (nvlist_alloc(&props, NV_UNIQUE_NAME, 0) != 0) { return (zfs_error_fmt(hdl, EZFS_NOMEM, dgettext(TEXT_DOMAIN, "cannot import '%s'"), newname)); } if (nvlist_add_string(props, zpool_prop_to_name(ZPOOL_PROP_ALTROOT), altroot) != 0 || nvlist_add_string(props, zpool_prop_to_name(ZPOOL_PROP_CACHEFILE), "none") != 0) { nvlist_free(props); return (zfs_error_fmt(hdl, EZFS_NOMEM, dgettext(TEXT_DOMAIN, "cannot import '%s'"), newname)); } } ret = zpool_import_props(hdl, config, newname, props, ZFS_IMPORT_NORMAL); if (props) nvlist_free(props); return (ret); } static void print_vdev_tree(libzfs_handle_t *hdl, const char *name, nvlist_t *nv, int indent) { nvlist_t **child; uint_t c, children; char *vname; uint64_t is_log = 0; (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_IS_LOG, &is_log); if (name != NULL) (void) printf("\t%*s%s%s\n", indent, "", name, is_log ? " [log]" : ""); if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, &child, &children) != 0) return; for (c = 0; c < children; c++) { vname = zpool_vdev_name(hdl, NULL, child[c], B_TRUE); print_vdev_tree(hdl, vname, child[c], indent + 2); free(vname); } } /* * Import the given pool using the known configuration and a list of * properties to be set. The configuration should have come from * zpool_find_import(). The 'newname' parameters control whether the pool * is imported with a different name. */ int zpool_import_props(libzfs_handle_t *hdl, nvlist_t *config, const char *newname, nvlist_t *props, int flags) { zfs_cmd_t zc = { 0 }; zpool_rewind_policy_t policy; nvlist_t *nv = NULL; nvlist_t *nvinfo = NULL; nvlist_t *missing = NULL; char *thename; char *origname; int ret; int error = 0; char errbuf[1024]; verify(nvlist_lookup_string(config, ZPOOL_CONFIG_POOL_NAME, &origname) == 0); (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot import pool '%s'"), origname); if (newname != NULL) { if (!zpool_name_valid(hdl, B_FALSE, newname)) return (zfs_error_fmt(hdl, EZFS_INVALIDNAME, dgettext(TEXT_DOMAIN, "cannot import '%s'"), newname)); thename = (char *)newname; } else { thename = origname; } if (props) { uint64_t version; verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_VERSION, &version) == 0); if ((props = zpool_valid_proplist(hdl, origname, props, version, B_TRUE, errbuf)) == NULL) { return (-1); } else if (zcmd_write_src_nvlist(hdl, &zc, props) != 0) { nvlist_free(props); return (-1); } } (void) strlcpy(zc.zc_name, thename, sizeof (zc.zc_name)); verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_GUID, &zc.zc_guid) == 0); if (zcmd_write_conf_nvlist(hdl, &zc, config) != 0) { nvlist_free(props); return (-1); } if (zcmd_alloc_dst_nvlist(hdl, &zc, zc.zc_nvlist_conf_size * 2) != 0) { nvlist_free(props); return (-1); } zc.zc_cookie = flags; while ((ret = zfs_ioctl(hdl, ZFS_IOC_POOL_IMPORT, &zc)) != 0 && errno == ENOMEM) { if (zcmd_expand_dst_nvlist(hdl, &zc) != 0) { zcmd_free_nvlists(&zc); return (-1); } } if (ret != 0) error = errno; (void) zcmd_read_dst_nvlist(hdl, &zc, &nv); zpool_get_rewind_policy(config, &policy); if (error) { char desc[1024]; /* * Dry-run failed, but we print out what success * looks like if we found a best txg */ if (policy.zrp_request & ZPOOL_TRY_REWIND) { zpool_rewind_exclaim(hdl, newname ? origname : thename, B_TRUE, nv); nvlist_free(nv); return (-1); } if (newname == NULL) (void) snprintf(desc, sizeof (desc), dgettext(TEXT_DOMAIN, "cannot import '%s'"), thename); else (void) snprintf(desc, sizeof (desc), dgettext(TEXT_DOMAIN, "cannot import '%s' as '%s'"), origname, thename); switch (error) { case ENOTSUP: /* * Unsupported version. */ (void) zfs_error(hdl, EZFS_BADVERSION, desc); break; case EINVAL: (void) zfs_error(hdl, EZFS_INVALCONFIG, desc); break; case EROFS: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "one or more devices is read only")); (void) zfs_error(hdl, EZFS_BADDEV, desc); break; case ENXIO: if (nv && nvlist_lookup_nvlist(nv, ZPOOL_CONFIG_LOAD_INFO, &nvinfo) == 0 && nvlist_lookup_nvlist(nvinfo, ZPOOL_CONFIG_MISSING_DEVICES, &missing) == 0) { (void) printf(dgettext(TEXT_DOMAIN, "The devices below are missing, use " "'-m' to import the pool anyway:\n")); print_vdev_tree(hdl, NULL, missing, 2); (void) printf("\n"); } (void) zpool_standard_error(hdl, error, desc); break; case EEXIST: (void) zpool_standard_error(hdl, error, desc); break; default: (void) zpool_standard_error(hdl, error, desc); zpool_explain_recover(hdl, newname ? origname : thename, -error, nv); break; } nvlist_free(nv); ret = -1; } else { zpool_handle_t *zhp; /* * This should never fail, but play it safe anyway. */ if (zpool_open_silent(hdl, thename, &zhp) != 0) ret = -1; else if (zhp != NULL) zpool_close(zhp); if (policy.zrp_request & (ZPOOL_DO_REWIND | ZPOOL_TRY_REWIND)) { zpool_rewind_exclaim(hdl, newname ? origname : thename, ((policy.zrp_request & ZPOOL_TRY_REWIND) != 0), nv); } nvlist_free(nv); return (0); } zcmd_free_nvlists(&zc); nvlist_free(props); return (ret); } /* * Scan the pool. */ int zpool_scan(zpool_handle_t *zhp, pool_scan_func_t func) { zfs_cmd_t zc = { 0 }; char msg[1024]; libzfs_handle_t *hdl = zhp->zpool_hdl; (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); zc.zc_cookie = func; if (zfs_ioctl(zhp->zpool_hdl, ZFS_IOC_POOL_SCAN, &zc) == 0 || (errno == ENOENT && func != POOL_SCAN_NONE)) return (0); if (func == POOL_SCAN_SCRUB) { (void) snprintf(msg, sizeof (msg), dgettext(TEXT_DOMAIN, "cannot scrub %s"), zc.zc_name); } else if (func == POOL_SCAN_NONE) { (void) snprintf(msg, sizeof (msg), dgettext(TEXT_DOMAIN, "cannot cancel scrubbing %s"), zc.zc_name); } else { assert(!"unexpected result"); } if (errno == EBUSY) { nvlist_t *nvroot; pool_scan_stat_t *ps = NULL; uint_t psc; verify(nvlist_lookup_nvlist(zhp->zpool_config, ZPOOL_CONFIG_VDEV_TREE, &nvroot) == 0); (void) nvlist_lookup_uint64_array(nvroot, ZPOOL_CONFIG_SCAN_STATS, (uint64_t **)&ps, &psc); if (ps && ps->pss_func == POOL_SCAN_SCRUB) return (zfs_error(hdl, EZFS_SCRUBBING, msg)); else return (zfs_error(hdl, EZFS_RESILVERING, msg)); } else if (errno == ENOENT) { return (zfs_error(hdl, EZFS_NO_SCRUB, msg)); } else { return (zpool_standard_error(hdl, errno, msg)); } } /* * This provides a very minimal check whether a given string is likely a * c#t#d# style string. Users of this are expected to do their own * verification of the s# part. */ #define CTD_CHECK(str) (str && str[0] == 'c' && isdigit(str[1])) /* * More elaborate version for ones which may start with "/dev/dsk/" * and the like. */ static int ctd_check_path(char *str) { /* * If it starts with a slash, check the last component. */ if (str && str[0] == '/') { char *tmp = strrchr(str, '/'); /* * If it ends in "/old", check the second-to-last * component of the string instead. */ if (tmp != str && strcmp(tmp, "/old") == 0) { for (tmp--; *tmp != '/'; tmp--) ; } str = tmp + 1; } return (CTD_CHECK(str)); } /* * Find a vdev that matches the search criteria specified. We use the * the nvpair name to determine how we should look for the device. * 'avail_spare' is set to TRUE if the provided guid refers to an AVAIL * spare; but FALSE if its an INUSE spare. */ static nvlist_t * vdev_to_nvlist_iter(nvlist_t *nv, nvlist_t *search, boolean_t *avail_spare, boolean_t *l2cache, boolean_t *log) { uint_t c, children; nvlist_t **child; nvlist_t *ret; uint64_t is_log; char *srchkey; nvpair_t *pair = nvlist_next_nvpair(search, NULL); /* Nothing to look for */ if (search == NULL || pair == NULL) return (NULL); /* Obtain the key we will use to search */ srchkey = nvpair_name(pair); switch (nvpair_type(pair)) { case DATA_TYPE_UINT64: { uint64_t srchval, theguid, present; verify(nvpair_value_uint64(pair, &srchval) == 0); if (strcmp(srchkey, ZPOOL_CONFIG_GUID) == 0) { if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_NOT_PRESENT, &present) == 0) { /* * If the device has never been present since * import, the only reliable way to match the * vdev is by GUID. */ verify(nvlist_lookup_uint64(nv, ZPOOL_CONFIG_GUID, &theguid) == 0); if (theguid == srchval) return (nv); } } break; } case DATA_TYPE_STRING: { char *srchval, *val; verify(nvpair_value_string(pair, &srchval) == 0); if (nvlist_lookup_string(nv, srchkey, &val) != 0) break; /* * Search for the requested value. Special cases: * * - ZPOOL_CONFIG_PATH for whole disk entries. These end in * "s0" or "s0/old". The "s0" part is hidden from the user, * but included in the string, so this matches around it. * - looking for a top-level vdev name (i.e. ZPOOL_CONFIG_TYPE). * * Otherwise, all other searches are simple string compares. */ if (strcmp(srchkey, ZPOOL_CONFIG_PATH) == 0 && ctd_check_path(val)) { uint64_t wholedisk = 0; (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_WHOLE_DISK, &wholedisk); if (wholedisk) { int slen = strlen(srchval); int vlen = strlen(val); if (slen != vlen - 2) break; /* * make_leaf_vdev() should only set * wholedisk for ZPOOL_CONFIG_PATHs which * will include "/dev/dsk/", giving plenty of * room for the indices used next. */ ASSERT(vlen >= 6); /* * strings identical except trailing "s0" */ if (strcmp(&val[vlen - 2], "s0") == 0 && strncmp(srchval, val, slen) == 0) return (nv); /* * strings identical except trailing "s0/old" */ if (strcmp(&val[vlen - 6], "s0/old") == 0 && strcmp(&srchval[slen - 4], "/old") == 0 && strncmp(srchval, val, slen - 4) == 0) return (nv); break; } } else if (strcmp(srchkey, ZPOOL_CONFIG_TYPE) == 0 && val) { char *type, *idx, *end, *p; uint64_t id, vdev_id; /* * Determine our vdev type, keeping in mind * that the srchval is composed of a type and * vdev id pair (i.e. mirror-4). */ if ((type = strdup(srchval)) == NULL) return (NULL); if ((p = strrchr(type, '-')) == NULL) { free(type); break; } idx = p + 1; *p = '\0'; /* * If the types don't match then keep looking. */ if (strncmp(val, type, strlen(val)) != 0) { free(type); break; } verify(strncmp(type, VDEV_TYPE_RAIDZ, strlen(VDEV_TYPE_RAIDZ)) == 0 || strncmp(type, VDEV_TYPE_MIRROR, strlen(VDEV_TYPE_MIRROR)) == 0); verify(nvlist_lookup_uint64(nv, ZPOOL_CONFIG_ID, &id) == 0); errno = 0; vdev_id = strtoull(idx, &end, 10); free(type); if (errno != 0) return (NULL); /* * Now verify that we have the correct vdev id. */ if (vdev_id == id) return (nv); } /* * Common case */ if (strcmp(srchval, val) == 0) return (nv); break; } default: break; } if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, &child, &children) != 0) return (NULL); for (c = 0; c < children; c++) { if ((ret = vdev_to_nvlist_iter(child[c], search, avail_spare, l2cache, NULL)) != NULL) { /* * The 'is_log' value is only set for the toplevel * vdev, not the leaf vdevs. So we always lookup the * log device from the root of the vdev tree (where * 'log' is non-NULL). */ if (log != NULL && nvlist_lookup_uint64(child[c], ZPOOL_CONFIG_IS_LOG, &is_log) == 0 && is_log) { *log = B_TRUE; } return (ret); } } if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_SPARES, &child, &children) == 0) { for (c = 0; c < children; c++) { if ((ret = vdev_to_nvlist_iter(child[c], search, avail_spare, l2cache, NULL)) != NULL) { *avail_spare = B_TRUE; return (ret); } } } if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_L2CACHE, &child, &children) == 0) { for (c = 0; c < children; c++) { if ((ret = vdev_to_nvlist_iter(child[c], search, avail_spare, l2cache, NULL)) != NULL) { *l2cache = B_TRUE; return (ret); } } } return (NULL); } /* * Given a physical path (minus the "/devices" prefix), find the * associated vdev. */ nvlist_t * zpool_find_vdev_by_physpath(zpool_handle_t *zhp, const char *ppath, boolean_t *avail_spare, boolean_t *l2cache, boolean_t *log) { nvlist_t *search, *nvroot, *ret; verify(nvlist_alloc(&search, NV_UNIQUE_NAME, KM_SLEEP) == 0); verify(nvlist_add_string(search, ZPOOL_CONFIG_PHYS_PATH, ppath) == 0); verify(nvlist_lookup_nvlist(zhp->zpool_config, ZPOOL_CONFIG_VDEV_TREE, &nvroot) == 0); *avail_spare = B_FALSE; ret = vdev_to_nvlist_iter(nvroot, search, avail_spare, l2cache, log); nvlist_free(search); return (ret); } /* * Determine if we have an "interior" top-level vdev (i.e mirror/raidz). */ boolean_t zpool_vdev_is_interior(const char *name) { if (strncmp(name, VDEV_TYPE_RAIDZ, strlen(VDEV_TYPE_RAIDZ)) == 0 || strncmp(name, VDEV_TYPE_MIRROR, strlen(VDEV_TYPE_MIRROR)) == 0) return (B_TRUE); return (B_FALSE); } nvlist_t * zpool_find_vdev(zpool_handle_t *zhp, const char *path, boolean_t *avail_spare, boolean_t *l2cache, boolean_t *log) { char buf[MAXPATHLEN]; char *end; nvlist_t *nvroot, *search, *ret; uint64_t guid; verify(nvlist_alloc(&search, NV_UNIQUE_NAME, KM_SLEEP) == 0); guid = strtoull(path, &end, 10); if (guid != 0 && *end == '\0') { verify(nvlist_add_uint64(search, ZPOOL_CONFIG_GUID, guid) == 0); } else if (zpool_vdev_is_interior(path)) { verify(nvlist_add_string(search, ZPOOL_CONFIG_TYPE, path) == 0); } else if (path[0] != '/') { (void) snprintf(buf, sizeof (buf), "%s%s", "/dev/dsk/", path); verify(nvlist_add_string(search, ZPOOL_CONFIG_PATH, buf) == 0); } else { verify(nvlist_add_string(search, ZPOOL_CONFIG_PATH, path) == 0); } verify(nvlist_lookup_nvlist(zhp->zpool_config, ZPOOL_CONFIG_VDEV_TREE, &nvroot) == 0); *avail_spare = B_FALSE; *l2cache = B_FALSE; if (log != NULL) *log = B_FALSE; ret = vdev_to_nvlist_iter(nvroot, search, avail_spare, l2cache, log); nvlist_free(search); return (ret); } static int vdev_online(nvlist_t *nv) { uint64_t ival; if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_OFFLINE, &ival) == 0 || nvlist_lookup_uint64(nv, ZPOOL_CONFIG_FAULTED, &ival) == 0 || nvlist_lookup_uint64(nv, ZPOOL_CONFIG_REMOVED, &ival) == 0) return (0); return (1); } /* * Helper function for zpool_get_physpaths(). */ static int vdev_get_one_physpath(nvlist_t *config, char *physpath, size_t physpath_size, size_t *bytes_written) { size_t bytes_left, pos, rsz; char *tmppath; const char *format; if (nvlist_lookup_string(config, ZPOOL_CONFIG_PHYS_PATH, &tmppath) != 0) return (EZFS_NODEVICE); pos = *bytes_written; bytes_left = physpath_size - pos; format = (pos == 0) ? "%s" : " %s"; rsz = snprintf(physpath + pos, bytes_left, format, tmppath); *bytes_written += rsz; if (rsz >= bytes_left) { /* if physpath was not copied properly, clear it */ if (bytes_left != 0) { physpath[pos] = 0; } return (EZFS_NOSPC); } return (0); } static int vdev_get_physpaths(nvlist_t *nv, char *physpath, size_t phypath_size, size_t *rsz, boolean_t is_spare) { char *type; int ret; if (nvlist_lookup_string(nv, ZPOOL_CONFIG_TYPE, &type) != 0) return (EZFS_INVALCONFIG); if (strcmp(type, VDEV_TYPE_DISK) == 0) { /* * An active spare device has ZPOOL_CONFIG_IS_SPARE set. * For a spare vdev, we only want to boot from the active * spare device. */ if (is_spare) { uint64_t spare = 0; (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_IS_SPARE, &spare); if (!spare) return (EZFS_INVALCONFIG); } if (vdev_online(nv)) { if ((ret = vdev_get_one_physpath(nv, physpath, phypath_size, rsz)) != 0) return (ret); } } else if (strcmp(type, VDEV_TYPE_MIRROR) == 0 || strcmp(type, VDEV_TYPE_REPLACING) == 0 || (is_spare = (strcmp(type, VDEV_TYPE_SPARE) == 0))) { nvlist_t **child; uint_t count; int i, ret; if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, &child, &count) != 0) return (EZFS_INVALCONFIG); for (i = 0; i < count; i++) { ret = vdev_get_physpaths(child[i], physpath, phypath_size, rsz, is_spare); if (ret == EZFS_NOSPC) return (ret); } } return (EZFS_POOL_INVALARG); } /* * Get phys_path for a root pool config. * Return 0 on success; non-zero on failure. */ static int zpool_get_config_physpath(nvlist_t *config, char *physpath, size_t phypath_size) { size_t rsz; nvlist_t *vdev_root; nvlist_t **child; uint_t count; char *type; rsz = 0; if (nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, &vdev_root) != 0) return (EZFS_INVALCONFIG); if (nvlist_lookup_string(vdev_root, ZPOOL_CONFIG_TYPE, &type) != 0 || nvlist_lookup_nvlist_array(vdev_root, ZPOOL_CONFIG_CHILDREN, &child, &count) != 0) return (EZFS_INVALCONFIG); /* * root pool can not have EFI labeled disks and can only have * a single top-level vdev. */ if (strcmp(type, VDEV_TYPE_ROOT) != 0 || count != 1 || pool_uses_efi(vdev_root)) return (EZFS_POOL_INVALARG); (void) vdev_get_physpaths(child[0], physpath, phypath_size, &rsz, B_FALSE); /* No online devices */ if (rsz == 0) return (EZFS_NODEVICE); return (0); } /* * Get phys_path for a root pool * Return 0 on success; non-zero on failure. */ int zpool_get_physpath(zpool_handle_t *zhp, char *physpath, size_t phypath_size) { return (zpool_get_config_physpath(zhp->zpool_config, physpath, phypath_size)); } /* * If the device has being dynamically expanded then we need to relabel * the disk to use the new unallocated space. */ static int zpool_relabel_disk(libzfs_handle_t *hdl, const char *name) { char path[MAXPATHLEN]; char errbuf[1024]; int fd, error; int (*_efi_use_whole_disk)(int); if ((_efi_use_whole_disk = (int (*)(int))dlsym(RTLD_DEFAULT, "efi_use_whole_disk")) == NULL) return (-1); (void) snprintf(path, sizeof (path), "%s/%s", RDISK_ROOT, name); if ((fd = open(path, O_RDWR | O_NDELAY)) < 0) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "cannot " "relabel '%s': unable to open device"), name); return (zfs_error(hdl, EZFS_OPENFAILED, errbuf)); } /* * It's possible that we might encounter an error if the device * does not have any unallocated space left. If so, we simply * ignore that error and continue on. */ error = _efi_use_whole_disk(fd); (void) close(fd); if (error && error != VT_ENOSPC) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "cannot " "relabel '%s': unable to read disk capacity"), name); return (zfs_error(hdl, EZFS_NOCAP, errbuf)); } return (0); } /* * Bring the specified vdev online. The 'flags' parameter is a set of the * ZFS_ONLINE_* flags. */ int zpool_vdev_online(zpool_handle_t *zhp, const char *path, int flags, vdev_state_t *newstate) { zfs_cmd_t zc = { 0 }; char msg[1024]; nvlist_t *tgt; boolean_t avail_spare, l2cache, islog; libzfs_handle_t *hdl = zhp->zpool_hdl; if (flags & ZFS_ONLINE_EXPAND) { (void) snprintf(msg, sizeof (msg), dgettext(TEXT_DOMAIN, "cannot expand %s"), path); } else { (void) snprintf(msg, sizeof (msg), dgettext(TEXT_DOMAIN, "cannot online %s"), path); } (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); if ((tgt = zpool_find_vdev(zhp, path, &avail_spare, &l2cache, &islog)) == NULL) return (zfs_error(hdl, EZFS_NODEVICE, msg)); verify(nvlist_lookup_uint64(tgt, ZPOOL_CONFIG_GUID, &zc.zc_guid) == 0); if (avail_spare) return (zfs_error(hdl, EZFS_ISSPARE, msg)); if (flags & ZFS_ONLINE_EXPAND || zpool_get_prop_int(zhp, ZPOOL_PROP_AUTOEXPAND, NULL)) { char *pathname = NULL; uint64_t wholedisk = 0; (void) nvlist_lookup_uint64(tgt, ZPOOL_CONFIG_WHOLE_DISK, &wholedisk); verify(nvlist_lookup_string(tgt, ZPOOL_CONFIG_PATH, &pathname) == 0); /* * XXX - L2ARC 1.0 devices can't support expansion. */ if (l2cache) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "cannot expand cache devices")); return (zfs_error(hdl, EZFS_VDEVNOTSUP, msg)); } if (wholedisk) { pathname += strlen(DISK_ROOT) + 1; (void) zpool_relabel_disk(zhp->zpool_hdl, pathname); } } zc.zc_cookie = VDEV_STATE_ONLINE; zc.zc_obj = flags; if (zfs_ioctl(zhp->zpool_hdl, ZFS_IOC_VDEV_SET_STATE, &zc) != 0) { if (errno == EINVAL) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "was split " "from this pool into a new one. Use '%s' " "instead"), "zpool detach"); return (zfs_error(hdl, EZFS_POSTSPLIT_ONLINE, msg)); } return (zpool_standard_error(hdl, errno, msg)); } *newstate = zc.zc_cookie; return (0); } /* * Take the specified vdev offline */ int zpool_vdev_offline(zpool_handle_t *zhp, const char *path, boolean_t istmp) { zfs_cmd_t zc = { 0 }; char msg[1024]; nvlist_t *tgt; boolean_t avail_spare, l2cache; libzfs_handle_t *hdl = zhp->zpool_hdl; (void) snprintf(msg, sizeof (msg), dgettext(TEXT_DOMAIN, "cannot offline %s"), path); (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); if ((tgt = zpool_find_vdev(zhp, path, &avail_spare, &l2cache, NULL)) == NULL) return (zfs_error(hdl, EZFS_NODEVICE, msg)); verify(nvlist_lookup_uint64(tgt, ZPOOL_CONFIG_GUID, &zc.zc_guid) == 0); if (avail_spare) return (zfs_error(hdl, EZFS_ISSPARE, msg)); zc.zc_cookie = VDEV_STATE_OFFLINE; zc.zc_obj = istmp ? ZFS_OFFLINE_TEMPORARY : 0; if (zfs_ioctl(zhp->zpool_hdl, ZFS_IOC_VDEV_SET_STATE, &zc) == 0) return (0); switch (errno) { case EBUSY: /* * There are no other replicas of this device. */ return (zfs_error(hdl, EZFS_NOREPLICAS, msg)); case EEXIST: /* * The log device has unplayed logs */ return (zfs_error(hdl, EZFS_UNPLAYED_LOGS, msg)); default: return (zpool_standard_error(hdl, errno, msg)); } } /* * Mark the given vdev faulted. */ int zpool_vdev_fault(zpool_handle_t *zhp, uint64_t guid, vdev_aux_t aux) { zfs_cmd_t zc = { 0 }; char msg[1024]; libzfs_handle_t *hdl = zhp->zpool_hdl; (void) snprintf(msg, sizeof (msg), dgettext(TEXT_DOMAIN, "cannot fault %llu"), guid); (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); zc.zc_guid = guid; zc.zc_cookie = VDEV_STATE_FAULTED; zc.zc_obj = aux; if (ioctl(zhp->zpool_hdl->libzfs_fd, ZFS_IOC_VDEV_SET_STATE, &zc) == 0) return (0); switch (errno) { case EBUSY: /* * There are no other replicas of this device. */ return (zfs_error(hdl, EZFS_NOREPLICAS, msg)); default: return (zpool_standard_error(hdl, errno, msg)); } } /* * Mark the given vdev degraded. */ int zpool_vdev_degrade(zpool_handle_t *zhp, uint64_t guid, vdev_aux_t aux) { zfs_cmd_t zc = { 0 }; char msg[1024]; libzfs_handle_t *hdl = zhp->zpool_hdl; (void) snprintf(msg, sizeof (msg), dgettext(TEXT_DOMAIN, "cannot degrade %llu"), guid); (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); zc.zc_guid = guid; zc.zc_cookie = VDEV_STATE_DEGRADED; zc.zc_obj = aux; if (ioctl(zhp->zpool_hdl->libzfs_fd, ZFS_IOC_VDEV_SET_STATE, &zc) == 0) return (0); return (zpool_standard_error(hdl, errno, msg)); } /* * Returns TRUE if the given nvlist is a vdev that was originally swapped in as * a hot spare. */ static boolean_t is_replacing_spare(nvlist_t *search, nvlist_t *tgt, int which) { nvlist_t **child; uint_t c, children; char *type; if (nvlist_lookup_nvlist_array(search, ZPOOL_CONFIG_CHILDREN, &child, &children) == 0) { verify(nvlist_lookup_string(search, ZPOOL_CONFIG_TYPE, &type) == 0); if (strcmp(type, VDEV_TYPE_SPARE) == 0 && children == 2 && child[which] == tgt) return (B_TRUE); for (c = 0; c < children; c++) if (is_replacing_spare(child[c], tgt, which)) return (B_TRUE); } return (B_FALSE); } /* * Attach new_disk (fully described by nvroot) to old_disk. * If 'replacing' is specified, the new disk will replace the old one. */ int zpool_vdev_attach(zpool_handle_t *zhp, const char *old_disk, const char *new_disk, nvlist_t *nvroot, int replacing) { zfs_cmd_t zc = { 0 }; char msg[1024]; int ret; nvlist_t *tgt; boolean_t avail_spare, l2cache, islog; uint64_t val; char *path, *newname; nvlist_t **child; uint_t children; nvlist_t *config_root; libzfs_handle_t *hdl = zhp->zpool_hdl; boolean_t rootpool = pool_is_bootable(zhp); if (replacing) (void) snprintf(msg, sizeof (msg), dgettext(TEXT_DOMAIN, "cannot replace %s with %s"), old_disk, new_disk); else (void) snprintf(msg, sizeof (msg), dgettext(TEXT_DOMAIN, "cannot attach %s to %s"), new_disk, old_disk); /* * If this is a root pool, make sure that we're not attaching an * EFI labeled device. */ if (rootpool && pool_uses_efi(nvroot)) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "EFI labeled devices are not supported on root pools.")); return (zfs_error(hdl, EZFS_POOL_NOTSUP, msg)); } (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); if ((tgt = zpool_find_vdev(zhp, old_disk, &avail_spare, &l2cache, &islog)) == 0) return (zfs_error(hdl, EZFS_NODEVICE, msg)); if (avail_spare) return (zfs_error(hdl, EZFS_ISSPARE, msg)); if (l2cache) return (zfs_error(hdl, EZFS_ISL2CACHE, msg)); verify(nvlist_lookup_uint64(tgt, ZPOOL_CONFIG_GUID, &zc.zc_guid) == 0); zc.zc_cookie = replacing; if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_CHILDREN, &child, &children) != 0 || children != 1) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "new device must be a single disk")); return (zfs_error(hdl, EZFS_INVALCONFIG, msg)); } verify(nvlist_lookup_nvlist(zpool_get_config(zhp, NULL), ZPOOL_CONFIG_VDEV_TREE, &config_root) == 0); if ((newname = zpool_vdev_name(NULL, NULL, child[0], B_FALSE)) == NULL) return (-1); /* * If the target is a hot spare that has been swapped in, we can only * replace it with another hot spare. */ if (replacing && nvlist_lookup_uint64(tgt, ZPOOL_CONFIG_IS_SPARE, &val) == 0 && (zpool_find_vdev(zhp, newname, &avail_spare, &l2cache, NULL) == NULL || !avail_spare) && is_replacing_spare(config_root, tgt, 1)) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "can only be replaced by another hot spare")); free(newname); return (zfs_error(hdl, EZFS_BADTARGET, msg)); } /* * If we are attempting to replace a spare, it canot be applied to an * already spared device. */ if (replacing && nvlist_lookup_string(child[0], ZPOOL_CONFIG_PATH, &path) == 0 && zpool_find_vdev(zhp, newname, &avail_spare, &l2cache, NULL) != NULL && avail_spare && is_replacing_spare(config_root, tgt, 0)) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "device has already been replaced with a spare")); free(newname); return (zfs_error(hdl, EZFS_BADTARGET, msg)); } free(newname); if (zcmd_write_conf_nvlist(hdl, &zc, nvroot) != 0) return (-1); ret = zfs_ioctl(zhp->zpool_hdl, ZFS_IOC_VDEV_ATTACH, &zc); zcmd_free_nvlists(&zc); if (ret == 0) { if (rootpool) { /* * XXX need a better way to prevent user from * booting up a half-baked vdev. */ (void) fprintf(stderr, dgettext(TEXT_DOMAIN, "Make " "sure to wait until resilver is done " "before rebooting.\n")); } return (0); } switch (errno) { case ENOTSUP: /* * Can't attach to or replace this type of vdev. */ if (replacing) { if (islog) zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "cannot replace a log with a spare")); else zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "cannot replace a replacing device")); } else { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "can only attach to mirrors and top-level " "disks")); } (void) zfs_error(hdl, EZFS_BADTARGET, msg); break; case EINVAL: /* * The new device must be a single disk. */ zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "new device must be a single disk")); (void) zfs_error(hdl, EZFS_INVALCONFIG, msg); break; case EBUSY: zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "%s is busy"), new_disk); (void) zfs_error(hdl, EZFS_BADDEV, msg); break; case EOVERFLOW: /* * The new device is too small. */ zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "device is too small")); (void) zfs_error(hdl, EZFS_BADDEV, msg); break; case EDOM: /* * The new device has a different alignment requirement. */ zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "devices have different sector alignment")); (void) zfs_error(hdl, EZFS_BADDEV, msg); break; case ENAMETOOLONG: /* * The resulting top-level vdev spec won't fit in the label. */ (void) zfs_error(hdl, EZFS_DEVOVERFLOW, msg); break; default: (void) zpool_standard_error(hdl, errno, msg); } return (-1); } /* * Detach the specified device. */ int zpool_vdev_detach(zpool_handle_t *zhp, const char *path) { zfs_cmd_t zc = { 0 }; char msg[1024]; nvlist_t *tgt; boolean_t avail_spare, l2cache; libzfs_handle_t *hdl = zhp->zpool_hdl; (void) snprintf(msg, sizeof (msg), dgettext(TEXT_DOMAIN, "cannot detach %s"), path); (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); if ((tgt = zpool_find_vdev(zhp, path, &avail_spare, &l2cache, NULL)) == 0) return (zfs_error(hdl, EZFS_NODEVICE, msg)); if (avail_spare) return (zfs_error(hdl, EZFS_ISSPARE, msg)); if (l2cache) return (zfs_error(hdl, EZFS_ISL2CACHE, msg)); verify(nvlist_lookup_uint64(tgt, ZPOOL_CONFIG_GUID, &zc.zc_guid) == 0); if (zfs_ioctl(hdl, ZFS_IOC_VDEV_DETACH, &zc) == 0) return (0); switch (errno) { case ENOTSUP: /* * Can't detach from this type of vdev. */ zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "only " "applicable to mirror and replacing vdevs")); (void) zfs_error(zhp->zpool_hdl, EZFS_BADTARGET, msg); break; case EBUSY: /* * There are no other replicas of this device. */ (void) zfs_error(hdl, EZFS_NOREPLICAS, msg); break; default: (void) zpool_standard_error(hdl, errno, msg); } return (-1); } /* * Find a mirror vdev in the source nvlist. * * The mchild array contains a list of disks in one of the top-level mirrors * of the source pool. The schild array contains a list of disks that the * user specified on the command line. We loop over the mchild array to * see if any entry in the schild array matches. * * If a disk in the mchild array is found in the schild array, we return * the index of that entry. Otherwise we return -1. */ static int find_vdev_entry(zpool_handle_t *zhp, nvlist_t **mchild, uint_t mchildren, nvlist_t **schild, uint_t schildren) { uint_t mc; for (mc = 0; mc < mchildren; mc++) { uint_t sc; char *mpath = zpool_vdev_name(zhp->zpool_hdl, zhp, mchild[mc], B_FALSE); for (sc = 0; sc < schildren; sc++) { char *spath = zpool_vdev_name(zhp->zpool_hdl, zhp, schild[sc], B_FALSE); boolean_t result = (strcmp(mpath, spath) == 0); free(spath); if (result) { free(mpath); return (mc); } } free(mpath); } return (-1); } /* * Split a mirror pool. If newroot points to null, then a new nvlist * is generated and it is the responsibility of the caller to free it. */ int zpool_vdev_split(zpool_handle_t *zhp, char *newname, nvlist_t **newroot, nvlist_t *props, splitflags_t flags) { zfs_cmd_t zc = { 0 }; char msg[1024]; nvlist_t *tree, *config, **child, **newchild, *newconfig = NULL; nvlist_t **varray = NULL, *zc_props = NULL; uint_t c, children, newchildren, lastlog = 0, vcount, found = 0; libzfs_handle_t *hdl = zhp->zpool_hdl; uint64_t vers; boolean_t freelist = B_FALSE, memory_err = B_TRUE; int retval = 0; (void) snprintf(msg, sizeof (msg), dgettext(TEXT_DOMAIN, "Unable to split %s"), zhp->zpool_name); if (!zpool_name_valid(hdl, B_FALSE, newname)) return (zfs_error(hdl, EZFS_INVALIDNAME, msg)); if ((config = zpool_get_config(zhp, NULL)) == NULL) { (void) fprintf(stderr, gettext("Internal error: unable to " "retrieve pool configuration\n")); return (-1); } verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, &tree) == 0); verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_VERSION, &vers) == 0); if (props) { if ((zc_props = zpool_valid_proplist(hdl, zhp->zpool_name, props, vers, B_TRUE, msg)) == NULL) return (-1); } if (nvlist_lookup_nvlist_array(tree, ZPOOL_CONFIG_CHILDREN, &child, &children) != 0) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "Source pool is missing vdev tree")); if (zc_props) nvlist_free(zc_props); return (-1); } varray = zfs_alloc(hdl, children * sizeof (nvlist_t *)); vcount = 0; if (*newroot == NULL || nvlist_lookup_nvlist_array(*newroot, ZPOOL_CONFIG_CHILDREN, &newchild, &newchildren) != 0) newchildren = 0; for (c = 0; c < children; c++) { uint64_t is_log = B_FALSE, is_hole = B_FALSE; char *type; nvlist_t **mchild, *vdev; uint_t mchildren; int entry; /* * Unlike cache & spares, slogs are stored in the * ZPOOL_CONFIG_CHILDREN array. We filter them out here. */ (void) nvlist_lookup_uint64(child[c], ZPOOL_CONFIG_IS_LOG, &is_log); (void) nvlist_lookup_uint64(child[c], ZPOOL_CONFIG_IS_HOLE, &is_hole); if (is_log || is_hole) { /* * Create a hole vdev and put it in the config. */ if (nvlist_alloc(&vdev, NV_UNIQUE_NAME, 0) != 0) goto out; if (nvlist_add_string(vdev, ZPOOL_CONFIG_TYPE, VDEV_TYPE_HOLE) != 0) goto out; if (nvlist_add_uint64(vdev, ZPOOL_CONFIG_IS_HOLE, 1) != 0) goto out; if (lastlog == 0) lastlog = vcount; varray[vcount++] = vdev; continue; } lastlog = 0; verify(nvlist_lookup_string(child[c], ZPOOL_CONFIG_TYPE, &type) == 0); if (strcmp(type, VDEV_TYPE_MIRROR) != 0) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "Source pool must be composed only of mirrors\n")); retval = zfs_error(hdl, EZFS_INVALCONFIG, msg); goto out; } verify(nvlist_lookup_nvlist_array(child[c], ZPOOL_CONFIG_CHILDREN, &mchild, &mchildren) == 0); /* find or add an entry for this top-level vdev */ if (newchildren > 0 && (entry = find_vdev_entry(zhp, mchild, mchildren, newchild, newchildren)) >= 0) { /* We found a disk that the user specified. */ vdev = mchild[entry]; ++found; } else { /* User didn't specify a disk for this vdev. */ vdev = mchild[mchildren - 1]; } if (nvlist_dup(vdev, &varray[vcount++], 0) != 0) goto out; } /* did we find every disk the user specified? */ if (found != newchildren) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "Device list must " "include at most one disk from each mirror")); retval = zfs_error(hdl, EZFS_INVALCONFIG, msg); goto out; } /* Prepare the nvlist for populating. */ if (*newroot == NULL) { if (nvlist_alloc(newroot, NV_UNIQUE_NAME, 0) != 0) goto out; freelist = B_TRUE; if (nvlist_add_string(*newroot, ZPOOL_CONFIG_TYPE, VDEV_TYPE_ROOT) != 0) goto out; } else { verify(nvlist_remove_all(*newroot, ZPOOL_CONFIG_CHILDREN) == 0); } /* Add all the children we found */ if (nvlist_add_nvlist_array(*newroot, ZPOOL_CONFIG_CHILDREN, varray, lastlog == 0 ? vcount : lastlog) != 0) goto out; /* * If we're just doing a dry run, exit now with success. */ if (flags.dryrun) { memory_err = B_FALSE; freelist = B_FALSE; goto out; } /* now build up the config list & call the ioctl */ if (nvlist_alloc(&newconfig, NV_UNIQUE_NAME, 0) != 0) goto out; if (nvlist_add_nvlist(newconfig, ZPOOL_CONFIG_VDEV_TREE, *newroot) != 0 || nvlist_add_string(newconfig, ZPOOL_CONFIG_POOL_NAME, newname) != 0 || nvlist_add_uint64(newconfig, ZPOOL_CONFIG_VERSION, vers) != 0) goto out; /* * The new pool is automatically part of the namespace unless we * explicitly export it. */ if (!flags.import) zc.zc_cookie = ZPOOL_EXPORT_AFTER_SPLIT; (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); (void) strlcpy(zc.zc_string, newname, sizeof (zc.zc_string)); if (zcmd_write_conf_nvlist(hdl, &zc, newconfig) != 0) goto out; if (zc_props != NULL && zcmd_write_src_nvlist(hdl, &zc, zc_props) != 0) goto out; if (zfs_ioctl(hdl, ZFS_IOC_VDEV_SPLIT, &zc) != 0) { retval = zpool_standard_error(hdl, errno, msg); goto out; } freelist = B_FALSE; memory_err = B_FALSE; out: if (varray != NULL) { int v; for (v = 0; v < vcount; v++) nvlist_free(varray[v]); free(varray); } zcmd_free_nvlists(&zc); if (zc_props) nvlist_free(zc_props); if (newconfig) nvlist_free(newconfig); if (freelist) { nvlist_free(*newroot); *newroot = NULL; } if (retval != 0) return (retval); if (memory_err) return (no_memory(hdl)); return (0); } /* * Remove the given device. Currently, this is supported only for hot spares * and level 2 cache devices. */ int zpool_vdev_remove(zpool_handle_t *zhp, const char *path) { zfs_cmd_t zc = { 0 }; char msg[1024]; nvlist_t *tgt; boolean_t avail_spare, l2cache, islog; libzfs_handle_t *hdl = zhp->zpool_hdl; uint64_t version; (void) snprintf(msg, sizeof (msg), dgettext(TEXT_DOMAIN, "cannot remove %s"), path); (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); if ((tgt = zpool_find_vdev(zhp, path, &avail_spare, &l2cache, &islog)) == 0) return (zfs_error(hdl, EZFS_NODEVICE, msg)); /* * XXX - this should just go away. */ if (!avail_spare && !l2cache && !islog) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "only inactive hot spares, cache, top-level, " "or log devices can be removed")); return (zfs_error(hdl, EZFS_NODEVICE, msg)); } version = zpool_get_prop_int(zhp, ZPOOL_PROP_VERSION, NULL); if (islog && version < SPA_VERSION_HOLES) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "pool must be upgrade to support log removal")); return (zfs_error(hdl, EZFS_BADVERSION, msg)); } verify(nvlist_lookup_uint64(tgt, ZPOOL_CONFIG_GUID, &zc.zc_guid) == 0); if (zfs_ioctl(hdl, ZFS_IOC_VDEV_REMOVE, &zc) == 0) return (0); return (zpool_standard_error(hdl, errno, msg)); } /* * Clear the errors for the pool, or the particular device if specified. */ int zpool_clear(zpool_handle_t *zhp, const char *path, nvlist_t *rewindnvl) { zfs_cmd_t zc = { 0 }; char msg[1024]; nvlist_t *tgt; zpool_rewind_policy_t policy; boolean_t avail_spare, l2cache; libzfs_handle_t *hdl = zhp->zpool_hdl; nvlist_t *nvi = NULL; int error; if (path) (void) snprintf(msg, sizeof (msg), dgettext(TEXT_DOMAIN, "cannot clear errors for %s"), path); else (void) snprintf(msg, sizeof (msg), dgettext(TEXT_DOMAIN, "cannot clear errors for %s"), zhp->zpool_name); (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); if (path) { if ((tgt = zpool_find_vdev(zhp, path, &avail_spare, &l2cache, NULL)) == 0) return (zfs_error(hdl, EZFS_NODEVICE, msg)); /* * Don't allow error clearing for hot spares. Do allow * error clearing for l2cache devices. */ if (avail_spare) return (zfs_error(hdl, EZFS_ISSPARE, msg)); verify(nvlist_lookup_uint64(tgt, ZPOOL_CONFIG_GUID, &zc.zc_guid) == 0); } zpool_get_rewind_policy(rewindnvl, &policy); zc.zc_cookie = policy.zrp_request; if (zcmd_alloc_dst_nvlist(hdl, &zc, zhp->zpool_config_size * 2) != 0) return (-1); if (zcmd_write_src_nvlist(zhp->zpool_hdl, &zc, rewindnvl) != 0) return (-1); while ((error = zfs_ioctl(hdl, ZFS_IOC_CLEAR, &zc)) != 0 && errno == ENOMEM) { if (zcmd_expand_dst_nvlist(hdl, &zc) != 0) { zcmd_free_nvlists(&zc); return (-1); } } if (!error || ((policy.zrp_request & ZPOOL_TRY_REWIND) && errno != EPERM && errno != EACCES)) { if (policy.zrp_request & (ZPOOL_DO_REWIND | ZPOOL_TRY_REWIND)) { (void) zcmd_read_dst_nvlist(hdl, &zc, &nvi); zpool_rewind_exclaim(hdl, zc.zc_name, ((policy.zrp_request & ZPOOL_TRY_REWIND) != 0), nvi); nvlist_free(nvi); } zcmd_free_nvlists(&zc); return (0); } zcmd_free_nvlists(&zc); return (zpool_standard_error(hdl, errno, msg)); } /* * Similar to zpool_clear(), but takes a GUID (used by fmd). */ int zpool_vdev_clear(zpool_handle_t *zhp, uint64_t guid) { zfs_cmd_t zc = { 0 }; char msg[1024]; libzfs_handle_t *hdl = zhp->zpool_hdl; (void) snprintf(msg, sizeof (msg), dgettext(TEXT_DOMAIN, "cannot clear errors for %llx"), guid); (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); zc.zc_guid = guid; zc.zc_cookie = ZPOOL_NO_REWIND; if (ioctl(hdl->libzfs_fd, ZFS_IOC_CLEAR, &zc) == 0) return (0); return (zpool_standard_error(hdl, errno, msg)); } /* * Convert from a devid string to a path. */ static char * devid_to_path(char *devid_str) { ddi_devid_t devid; char *minor; char *path; devid_nmlist_t *list = NULL; int ret; if (devid_str_decode(devid_str, &devid, &minor) != 0) return (NULL); ret = devid_deviceid_to_nmlist("/dev", devid, minor, &list); devid_str_free(minor); devid_free(devid); if (ret != 0) return (NULL); if ((path = strdup(list[0].devname)) == NULL) return (NULL); devid_free_nmlist(list); return (path); } /* * Convert from a path to a devid string. */ static char * path_to_devid(const char *path) { int fd; ddi_devid_t devid; char *minor, *ret; if ((fd = open(path, O_RDONLY)) < 0) return (NULL); minor = NULL; ret = NULL; if (devid_get(fd, &devid) == 0) { if (devid_get_minor_name(fd, &minor) == 0) ret = devid_str_encode(devid, minor); if (minor != NULL) devid_str_free(minor); devid_free(devid); } (void) close(fd); return (ret); } /* * Issue the necessary ioctl() to update the stored path value for the vdev. We * ignore any failure here, since a common case is for an unprivileged user to * type 'zpool status', and we'll display the correct information anyway. */ static void set_path(zpool_handle_t *zhp, nvlist_t *nv, const char *path) { zfs_cmd_t zc = { 0 }; (void) strncpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); (void) strncpy(zc.zc_value, path, sizeof (zc.zc_value)); verify(nvlist_lookup_uint64(nv, ZPOOL_CONFIG_GUID, &zc.zc_guid) == 0); (void) ioctl(zhp->zpool_hdl->libzfs_fd, ZFS_IOC_VDEV_SETPATH, &zc); } /* * Given a vdev, return the name to display in iostat. If the vdev has a path, * we use that, stripping off any leading "/dev/dsk/"; if not, we use the type. * We also check if this is a whole disk, in which case we strip off the * trailing 's0' slice name. * * This routine is also responsible for identifying when disks have been * reconfigured in a new location. The kernel will have opened the device by * devid, but the path will still refer to the old location. To catch this, we * first do a path -> devid translation (which is fast for the common case). If * the devid matches, we're done. If not, we do a reverse devid -> path * translation and issue the appropriate ioctl() to update the path of the vdev. * If 'zhp' is NULL, then this is an exported pool, and we don't need to do any * of these checks. */ char * zpool_vdev_name(libzfs_handle_t *hdl, zpool_handle_t *zhp, nvlist_t *nv, boolean_t verbose) { char *path, *devid; uint64_t value; char buf[64]; vdev_stat_t *vs; uint_t vsc; if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_NOT_PRESENT, &value) == 0) { verify(nvlist_lookup_uint64(nv, ZPOOL_CONFIG_GUID, &value) == 0); (void) snprintf(buf, sizeof (buf), "%llu", (u_longlong_t)value); path = buf; } else if (nvlist_lookup_string(nv, ZPOOL_CONFIG_PATH, &path) == 0) { /* * If the device is dead (faulted, offline, etc) then don't * bother opening it. Otherwise we may be forcing the user to * open a misbehaving device, which can have undesirable * effects. */ if ((nvlist_lookup_uint64_array(nv, ZPOOL_CONFIG_VDEV_STATS, (uint64_t **)&vs, &vsc) != 0 || vs->vs_state >= VDEV_STATE_DEGRADED) && zhp != NULL && nvlist_lookup_string(nv, ZPOOL_CONFIG_DEVID, &devid) == 0) { /* * Determine if the current path is correct. */ char *newdevid = path_to_devid(path); if (newdevid == NULL || strcmp(devid, newdevid) != 0) { char *newpath; if ((newpath = devid_to_path(devid)) != NULL) { /* * Update the path appropriately. */ set_path(zhp, nv, newpath); if (nvlist_add_string(nv, ZPOOL_CONFIG_PATH, newpath) == 0) verify(nvlist_lookup_string(nv, ZPOOL_CONFIG_PATH, &path) == 0); free(newpath); } } if (newdevid) devid_str_free(newdevid); } if (strncmp(path, "/dev/dsk/", 9) == 0) path += 9; if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_WHOLE_DISK, &value) == 0 && value) { int pathlen = strlen(path); char *tmp = zfs_strdup(hdl, path); /* * If it starts with c#, and ends with "s0", chop * the "s0" off, or if it ends with "s0/old", remove * the "s0" from the middle. */ if (CTD_CHECK(tmp)) { if (strcmp(&tmp[pathlen - 2], "s0") == 0) { tmp[pathlen - 2] = '\0'; } else if (pathlen > 6 && strcmp(&tmp[pathlen - 6], "s0/old") == 0) { (void) strcpy(&tmp[pathlen - 6], "/old"); } } return (tmp); } } else { verify(nvlist_lookup_string(nv, ZPOOL_CONFIG_TYPE, &path) == 0); /* * If it's a raidz device, we need to stick in the parity level. */ if (strcmp(path, VDEV_TYPE_RAIDZ) == 0) { verify(nvlist_lookup_uint64(nv, ZPOOL_CONFIG_NPARITY, &value) == 0); (void) snprintf(buf, sizeof (buf), "%s%llu", path, (u_longlong_t)value); path = buf; } /* * We identify each top-level vdev by using a * naming convention. */ if (verbose) { uint64_t id; verify(nvlist_lookup_uint64(nv, ZPOOL_CONFIG_ID, &id) == 0); (void) snprintf(buf, sizeof (buf), "%s-%llu", path, (u_longlong_t)id); path = buf; } } return (zfs_strdup(hdl, path)); } static int zbookmark_compare(const void *a, const void *b) { return (memcmp(a, b, sizeof (zbookmark_t))); } /* * Retrieve the persistent error log, uniquify the members, and return to the * caller. */ int zpool_get_errlog(zpool_handle_t *zhp, nvlist_t **nverrlistp) { zfs_cmd_t zc = { 0 }; uint64_t count; zbookmark_t *zb = NULL; int i; /* * Retrieve the raw error list from the kernel. If the number of errors * has increased, allocate more space and continue until we get the * entire list. */ verify(nvlist_lookup_uint64(zhp->zpool_config, ZPOOL_CONFIG_ERRCOUNT, &count) == 0); if (count == 0) return (0); if ((zc.zc_nvlist_dst = (uintptr_t)zfs_alloc(zhp->zpool_hdl, count * sizeof (zbookmark_t))) == (uintptr_t)NULL) return (-1); zc.zc_nvlist_dst_size = count; (void) strcpy(zc.zc_name, zhp->zpool_name); for (;;) { if (ioctl(zhp->zpool_hdl->libzfs_fd, ZFS_IOC_ERROR_LOG, &zc) != 0) { free((void *)(uintptr_t)zc.zc_nvlist_dst); if (errno == ENOMEM) { count = zc.zc_nvlist_dst_size; if ((zc.zc_nvlist_dst = (uintptr_t) zfs_alloc(zhp->zpool_hdl, count * sizeof (zbookmark_t))) == (uintptr_t)NULL) return (-1); } else { return (-1); } } else { break; } } /* * Sort the resulting bookmarks. This is a little confusing due to the * implementation of ZFS_IOC_ERROR_LOG. The bookmarks are copied last * to first, and 'zc_nvlist_dst_size' indicates the number of boomarks * _not_ copied as part of the process. So we point the start of our * array appropriate and decrement the total number of elements. */ zb = ((zbookmark_t *)(uintptr_t)zc.zc_nvlist_dst) + zc.zc_nvlist_dst_size; count -= zc.zc_nvlist_dst_size; qsort(zb, count, sizeof (zbookmark_t), zbookmark_compare); verify(nvlist_alloc(nverrlistp, 0, KM_SLEEP) == 0); /* * Fill in the nverrlistp with nvlist's of dataset and object numbers. */ for (i = 0; i < count; i++) { nvlist_t *nv; /* ignoring zb_blkid and zb_level for now */ if (i > 0 && zb[i-1].zb_objset == zb[i].zb_objset && zb[i-1].zb_object == zb[i].zb_object) continue; if (nvlist_alloc(&nv, NV_UNIQUE_NAME, KM_SLEEP) != 0) goto nomem; if (nvlist_add_uint64(nv, ZPOOL_ERR_DATASET, zb[i].zb_objset) != 0) { nvlist_free(nv); goto nomem; } if (nvlist_add_uint64(nv, ZPOOL_ERR_OBJECT, zb[i].zb_object) != 0) { nvlist_free(nv); goto nomem; } if (nvlist_add_nvlist(*nverrlistp, "ejk", nv) != 0) { nvlist_free(nv); goto nomem; } nvlist_free(nv); } free((void *)(uintptr_t)zc.zc_nvlist_dst); return (0); nomem: free((void *)(uintptr_t)zc.zc_nvlist_dst); return (no_memory(zhp->zpool_hdl)); } /* * Upgrade a ZFS pool to the latest on-disk version. */ int zpool_upgrade(zpool_handle_t *zhp, uint64_t new_version) { zfs_cmd_t zc = { 0 }; libzfs_handle_t *hdl = zhp->zpool_hdl; (void) strcpy(zc.zc_name, zhp->zpool_name); zc.zc_cookie = new_version; if (zfs_ioctl(hdl, ZFS_IOC_POOL_UPGRADE, &zc) != 0) return (zpool_standard_error_fmt(hdl, errno, dgettext(TEXT_DOMAIN, "cannot upgrade '%s'"), zhp->zpool_name)); return (0); } void zpool_set_history_str(const char *subcommand, int argc, char **argv, char *history_str) { int i; (void) strlcpy(history_str, subcommand, HIS_MAX_RECORD_LEN); for (i = 1; i < argc; i++) { if (strlen(history_str) + 1 + strlen(argv[i]) > HIS_MAX_RECORD_LEN) break; (void) strlcat(history_str, " ", HIS_MAX_RECORD_LEN); (void) strlcat(history_str, argv[i], HIS_MAX_RECORD_LEN); } } /* * Stage command history for logging. */ int zpool_stage_history(libzfs_handle_t *hdl, const char *history_str) { if (history_str == NULL) return (EINVAL); if (strlen(history_str) > HIS_MAX_RECORD_LEN) return (EINVAL); if (hdl->libzfs_log_str != NULL) free(hdl->libzfs_log_str); if ((hdl->libzfs_log_str = strdup(history_str)) == NULL) return (no_memory(hdl)); return (0); } /* * Perform ioctl to get some command history of a pool. * * 'buf' is the buffer to fill up to 'len' bytes. 'off' is the * logical offset of the history buffer to start reading from. * * Upon return, 'off' is the next logical offset to read from and * 'len' is the actual amount of bytes read into 'buf'. */ static int get_history(zpool_handle_t *zhp, char *buf, uint64_t *off, uint64_t *len) { zfs_cmd_t zc = { 0 }; libzfs_handle_t *hdl = zhp->zpool_hdl; (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); zc.zc_history = (uint64_t)(uintptr_t)buf; zc.zc_history_len = *len; zc.zc_history_offset = *off; if (ioctl(hdl->libzfs_fd, ZFS_IOC_POOL_GET_HISTORY, &zc) != 0) { switch (errno) { case EPERM: return (zfs_error_fmt(hdl, EZFS_PERM, dgettext(TEXT_DOMAIN, "cannot show history for pool '%s'"), zhp->zpool_name)); case ENOENT: return (zfs_error_fmt(hdl, EZFS_NOHISTORY, dgettext(TEXT_DOMAIN, "cannot get history for pool " "'%s'"), zhp->zpool_name)); case ENOTSUP: return (zfs_error_fmt(hdl, EZFS_BADVERSION, dgettext(TEXT_DOMAIN, "cannot get history for pool " "'%s', pool must be upgraded"), zhp->zpool_name)); default: return (zpool_standard_error_fmt(hdl, errno, dgettext(TEXT_DOMAIN, "cannot get history for '%s'"), zhp->zpool_name)); } } *len = zc.zc_history_len; *off = zc.zc_history_offset; return (0); } /* * Process the buffer of nvlists, unpacking and storing each nvlist record * into 'records'. 'leftover' is set to the number of bytes that weren't * processed as there wasn't a complete record. */ int zpool_history_unpack(char *buf, uint64_t bytes_read, uint64_t *leftover, nvlist_t ***records, uint_t *numrecords) { uint64_t reclen; nvlist_t *nv; int i; while (bytes_read > sizeof (reclen)) { /* get length of packed record (stored as little endian) */ for (i = 0, reclen = 0; i < sizeof (reclen); i++) reclen += (uint64_t)(((uchar_t *)buf)[i]) << (8*i); if (bytes_read < sizeof (reclen) + reclen) break; /* unpack record */ if (nvlist_unpack(buf + sizeof (reclen), reclen, &nv, 0) != 0) return (ENOMEM); bytes_read -= sizeof (reclen) + reclen; buf += sizeof (reclen) + reclen; /* add record to nvlist array */ (*numrecords)++; if (ISP2(*numrecords + 1)) { *records = realloc(*records, *numrecords * 2 * sizeof (nvlist_t *)); } (*records)[*numrecords - 1] = nv; } *leftover = bytes_read; return (0); } #define HIS_BUF_LEN (128*1024) /* * Retrieve the command history of a pool. */ int zpool_get_history(zpool_handle_t *zhp, nvlist_t **nvhisp) { char buf[HIS_BUF_LEN]; uint64_t off = 0; nvlist_t **records = NULL; uint_t numrecords = 0; int err, i; do { uint64_t bytes_read = sizeof (buf); uint64_t leftover; if ((err = get_history(zhp, buf, &off, &bytes_read)) != 0) break; /* if nothing else was read in, we're at EOF, just return */ if (!bytes_read) break; if ((err = zpool_history_unpack(buf, bytes_read, &leftover, &records, &numrecords)) != 0) break; off -= leftover; /* CONSTCOND */ } while (1); if (!err) { verify(nvlist_alloc(nvhisp, NV_UNIQUE_NAME, 0) == 0); verify(nvlist_add_nvlist_array(*nvhisp, ZPOOL_HIST_RECORD, records, numrecords) == 0); } for (i = 0; i < numrecords; i++) nvlist_free(records[i]); free(records); return (err); } void zpool_obj_to_path(zpool_handle_t *zhp, uint64_t dsobj, uint64_t obj, char *pathname, size_t len) { zfs_cmd_t zc = { 0 }; boolean_t mounted = B_FALSE; char *mntpnt = NULL; char dsname[MAXNAMELEN]; if (dsobj == 0) { /* special case for the MOS */ (void) snprintf(pathname, len, ":<0x%llx>", obj); return; } /* get the dataset's name */ (void) strlcpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); zc.zc_obj = dsobj; if (ioctl(zhp->zpool_hdl->libzfs_fd, ZFS_IOC_DSOBJ_TO_DSNAME, &zc) != 0) { /* just write out a path of two object numbers */ (void) snprintf(pathname, len, "<0x%llx>:<0x%llx>", dsobj, obj); return; } (void) strlcpy(dsname, zc.zc_value, sizeof (dsname)); /* find out if the dataset is mounted */ mounted = is_mounted(zhp->zpool_hdl, dsname, &mntpnt); /* get the corrupted object's path */ (void) strlcpy(zc.zc_name, dsname, sizeof (zc.zc_name)); zc.zc_obj = obj; if (ioctl(zhp->zpool_hdl->libzfs_fd, ZFS_IOC_OBJ_TO_PATH, &zc) == 0) { if (mounted) { (void) snprintf(pathname, len, "%s%s", mntpnt, zc.zc_value); } else { (void) snprintf(pathname, len, "%s:%s", dsname, zc.zc_value); } } else { (void) snprintf(pathname, len, "%s:<0x%llx>", dsname, obj); } free(mntpnt); } /* * Read the EFI label from the config, if a label does not exist then * pass back the error to the caller. If the caller has passed a non-NULL * diskaddr argument then we set it to the starting address of the EFI * partition. */ static int read_efi_label(nvlist_t *config, diskaddr_t *sb) { char *path; int fd; char diskname[MAXPATHLEN]; int err = -1; if (nvlist_lookup_string(config, ZPOOL_CONFIG_PATH, &path) != 0) return (err); (void) snprintf(diskname, sizeof (diskname), "%s%s", RDISK_ROOT, strrchr(path, '/')); if ((fd = open(diskname, O_RDONLY|O_NDELAY)) >= 0) { struct dk_gpt *vtoc; if ((err = efi_alloc_and_read(fd, &vtoc)) >= 0) { if (sb != NULL) *sb = vtoc->efi_parts[0].p_start; efi_free(vtoc); } (void) close(fd); } return (err); } /* * determine where a partition starts on a disk in the current * configuration */ static diskaddr_t find_start_block(nvlist_t *config) { nvlist_t **child; uint_t c, children; diskaddr_t sb = MAXOFFSET_T; uint64_t wholedisk; if (nvlist_lookup_nvlist_array(config, ZPOOL_CONFIG_CHILDREN, &child, &children) != 0) { if (nvlist_lookup_uint64(config, ZPOOL_CONFIG_WHOLE_DISK, &wholedisk) != 0 || !wholedisk) { return (MAXOFFSET_T); } if (read_efi_label(config, &sb) < 0) sb = MAXOFFSET_T; return (sb); } for (c = 0; c < children; c++) { sb = find_start_block(child[c]); if (sb != MAXOFFSET_T) { return (sb); } } return (MAXOFFSET_T); } /* * Label an individual disk. The name provided is the short name, * stripped of any leading /dev path. */ int zpool_label_disk(libzfs_handle_t *hdl, zpool_handle_t *zhp, char *name) { char path[MAXPATHLEN]; struct dk_gpt *vtoc; int fd; size_t resv = EFI_MIN_RESV_SIZE; uint64_t slice_size; diskaddr_t start_block; char errbuf[1024]; /* prepare an error message just in case */ (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "cannot label '%s'"), name); if (zhp) { nvlist_t *nvroot; if (pool_is_bootable(zhp)) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "EFI labeled devices are not supported on root " "pools.")); return (zfs_error(hdl, EZFS_POOL_NOTSUP, errbuf)); } verify(nvlist_lookup_nvlist(zhp->zpool_config, ZPOOL_CONFIG_VDEV_TREE, &nvroot) == 0); if (zhp->zpool_start_block == 0) start_block = find_start_block(nvroot); else start_block = zhp->zpool_start_block; zhp->zpool_start_block = start_block; } else { /* new pool */ start_block = NEW_START_BLOCK; } (void) snprintf(path, sizeof (path), "%s/%s%s", RDISK_ROOT, name, BACKUP_SLICE); if ((fd = open(path, O_RDWR | O_NDELAY)) < 0) { /* * This shouldn't happen. We've long since verified that this * is a valid device. */ zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "unable to open device")); return (zfs_error(hdl, EZFS_OPENFAILED, errbuf)); } if (efi_alloc_and_init(fd, EFI_NUMPAR, &vtoc) != 0) { /* * The only way this can fail is if we run out of memory, or we * were unable to read the disk's capacity */ if (errno == ENOMEM) (void) no_memory(hdl); (void) close(fd); zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "unable to read disk capacity"), name); return (zfs_error(hdl, EZFS_NOCAP, errbuf)); } slice_size = vtoc->efi_last_u_lba + 1; slice_size -= EFI_MIN_RESV_SIZE; if (start_block == MAXOFFSET_T) start_block = NEW_START_BLOCK; slice_size -= start_block; vtoc->efi_parts[0].p_start = start_block; vtoc->efi_parts[0].p_size = slice_size; /* * Why we use V_USR: V_BACKUP confuses users, and is considered * disposable by some EFI utilities (since EFI doesn't have a backup * slice). V_UNASSIGNED is supposed to be used only for zero size * partitions, and efi_write() will fail if we use it. V_ROOT, V_BOOT, * etc. were all pretty specific. V_USR is as close to reality as we * can get, in the absence of V_OTHER. */ vtoc->efi_parts[0].p_tag = V_USR; (void) strcpy(vtoc->efi_parts[0].p_name, "zfs"); vtoc->efi_parts[8].p_start = slice_size + start_block; vtoc->efi_parts[8].p_size = resv; vtoc->efi_parts[8].p_tag = V_RESERVED; if (efi_write(fd, vtoc) != 0) { /* * Some block drivers (like pcata) may not support EFI * GPT labels. Print out a helpful error message dir- * ecting the user to manually label the disk and give * a specific slice. */ (void) close(fd); efi_free(vtoc); zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "try using fdisk(1M) and then provide a specific slice")); return (zfs_error(hdl, EZFS_LABELFAILED, errbuf)); } (void) close(fd); efi_free(vtoc); return (0); } static boolean_t supported_dump_vdev_type(libzfs_handle_t *hdl, nvlist_t *config, char *errbuf) { char *type; nvlist_t **child; uint_t children, c; verify(nvlist_lookup_string(config, ZPOOL_CONFIG_TYPE, &type) == 0); if (strcmp(type, VDEV_TYPE_RAIDZ) == 0 || strcmp(type, VDEV_TYPE_FILE) == 0 || strcmp(type, VDEV_TYPE_LOG) == 0 || strcmp(type, VDEV_TYPE_HOLE) == 0 || strcmp(type, VDEV_TYPE_MISSING) == 0) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "vdev type '%s' is not supported"), type); (void) zfs_error(hdl, EZFS_VDEVNOTSUP, errbuf); return (B_FALSE); } if (nvlist_lookup_nvlist_array(config, ZPOOL_CONFIG_CHILDREN, &child, &children) == 0) { for (c = 0; c < children; c++) { if (!supported_dump_vdev_type(hdl, child[c], errbuf)) return (B_FALSE); } } return (B_TRUE); } /* * check if this zvol is allowable for use as a dump device; zero if * it is, > 0 if it isn't, < 0 if it isn't a zvol */ int zvol_check_dump_config(char *arg) { zpool_handle_t *zhp = NULL; nvlist_t *config, *nvroot; char *p, *volname; nvlist_t **top; uint_t toplevels; libzfs_handle_t *hdl; char errbuf[1024]; char poolname[ZPOOL_MAXNAMELEN]; int pathlen = strlen(ZVOL_FULL_DEV_DIR); int ret = 1; if (strncmp(arg, ZVOL_FULL_DEV_DIR, pathlen)) { return (-1); } (void) snprintf(errbuf, sizeof (errbuf), dgettext(TEXT_DOMAIN, "dump is not supported on device '%s'"), arg); if ((hdl = libzfs_init()) == NULL) return (1); libzfs_print_on_error(hdl, B_TRUE); volname = arg + pathlen; /* check the configuration of the pool */ if ((p = strchr(volname, '/')) == NULL) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "malformed dataset name")); (void) zfs_error(hdl, EZFS_INVALIDNAME, errbuf); return (1); } else if (p - volname >= ZFS_MAXNAMELEN) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "dataset name is too long")); (void) zfs_error(hdl, EZFS_NAMETOOLONG, errbuf); return (1); } else { (void) strncpy(poolname, volname, p - volname); poolname[p - volname] = '\0'; } if ((zhp = zpool_open(hdl, poolname)) == NULL) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "could not open pool '%s'"), poolname); (void) zfs_error(hdl, EZFS_OPENFAILED, errbuf); goto out; } config = zpool_get_config(zhp, NULL); if (nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, &nvroot) != 0) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "could not obtain vdev configuration for '%s'"), poolname); (void) zfs_error(hdl, EZFS_INVALCONFIG, errbuf); goto out; } verify(nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_CHILDREN, &top, &toplevels) == 0); if (toplevels != 1) { zfs_error_aux(hdl, dgettext(TEXT_DOMAIN, "'%s' has multiple top level vdevs"), poolname); (void) zfs_error(hdl, EZFS_DEVOVERFLOW, errbuf); goto out; } if (!supported_dump_vdev_type(hdl, top[0], errbuf)) { goto out; } ret = 0; out: if (zhp) zpool_close(zhp); libzfs_fini(hdl); return (ret); }