# # CDDL HEADER START # # The contents of this file are subject to the terms of the # Common Development and Distribution License (the "License"). # You may not use this file except in compliance with the License. # # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE # or http://www.opensolaris.org/os/licensing. # See the License for the specific language governing permissions # and limitations under the License. # # When distributing Covered Code, include this CDDL HEADER in each # file and include the License file at usr/src/OPENSOLARIS.LICENSE. # If applicable, add the following below this CDDL HEADER, with the # fields enclosed by brackets "[]" replaced with your own identifying # information: Portions Copyright [yyyy] [name of copyright owner] # # CDDL HEADER END # # # Copyright 2006 Sun Microsystems, Inc. All rights reserved. # Use is subject to license terms. # # ident "%Z%%M% %I% %E% SMI" # include ../Makefile.master # Note that libcurses installs commands along with its library. # This is a minor bug which probably should be fixed. # Note also that a few extra libraries are kept in cmd source. # # Certain libraries are linked with, hence depend on, other libraries. # # Although we have historically used .WAIT to express dependencies, it # reduces the amount of parallelism and thus lengthens the time it # takes to build the libraries. Thus, we now require that any new # libraries explicitly call out their dependencies. Eventually, all # the library dependencies will be called out explicitly. See # "Library interdependencies" near the end of this file. # # Aside from explicit dependencies (and legacy .WAITs), all libraries # are built in parallel. # .PARALLEL: # # The $(CLOSED_BUILD) additions to SUBDIRS & MSGSUBDIRS are unfortunate, # but required due to the "dependencies" of using .WAIT to barrier the # parallel dmake builds. once 4631488 has been fixed, they can be # consolidated into one $(CLOSED_BUILD)SUBDIRS += (all closed libs) as # shown in HDRSUBDIRS # SUBDIRS= \ common .WAIT \ ../cmd/sgs/libconv \ ../cmd/sgs/libdl .WAIT $(CLOSED_BUILD)SUBDIRS += \ $(CLOSED)/lib/libc_i18n SUBDIRS += \ libc .WAIT \ ../cmd/sgs/libelf .WAIT \ libmd \ libmd5 \ librsm \ libmp .WAIT \ libnsl \ libsecdb .WAIT \ librpcsvc \ libsocket .WAIT \ libsctp \ libsip \ libresolv \ libresolv2 .WAIT \ libw .WAIT \ libintl .WAIT \ ../cmd/sgs/librtld_db \ libaio \ librt \ libadm \ libctf \ libdtrace \ libdtrace_jni \ libcurses \ libgen \ libgss \ libpam \ libuuid \ libthread \ libpthread .WAIT \ libslp \ libbsdmalloc \ libcmd \ libdoor \ libdevinfo \ libdladm \ libdlpi \ libeti \ libcrypt \ libefi \ libfstyp \ libwanboot \ libwanbootutil \ libcryptoutil \ libinetcfg \ libinetutil \ libipmp \ libiscsitgt \ libkmf \ libkstat \ libkvm \ liblaadm \ liblm \ libmacadm \ libmalloc \ libmapmalloc \ libmtmalloc \ libnls \ libsmbios \ libtecla \ libumem \ libnvpair .WAIT \ libexacct \ libplot \ libldap4 \ libsasl \ libldap5 \ libsldap .WAIT \ libbsm \ libsys \ libsysevent \ libnisdb \ libpool \ libproc \ libproject \ libsendfile \ nametoaddr \ ncad_addr \ gss_mechs/mech_krb5 .WAIT \ libkrb5 .WAIT \ krb5 .WAIT $(CLOSED_BUILD)SUBDIRS += \ $(CLOSED)/lib/smartcard SUBDIRS += \ passwdutil \ pam_modules \ crypt_modules \ libadt_jni \ abi \ auditd_plugins \ libvolmgt \ libdevice \ libdevid \ libdhcpsvc \ libc_db \ libsec \ libtnfprobe \ libtnf \ libtnfctl \ libdhcpagent \ libdhcpdu \ libdhcputil \ libipsecutil $(CLOSED_BUILD)SUBDIRS += \ $(CLOSED)/lib/libike SUBDIRS += \ nsswitch \ print \ libuutil \ libscf \ libinetsvc \ librestart \ libsched $(CLOSED_BUILD)SUBDIRS += \ $(CLOSED)/lib/libelfsign SUBDIRS += \ pkcs11 .WAIT \ libpctx .WAIT \ libcpc \ watchmalloc \ extendedFILE \ madv \ mpss \ libdisasm \ libwladm \ libwrap \ libxcurses \ libxcurses2 \ libxnet \ libbrand .WAIT \ libzonecfg \ libzoneinfo \ libtsnet \ libtsol \ gss_mechs/mech_spnego \ gss_mechs/mech_dummy \ gss_mechs/mech_dh \ rpcsec_gss \ librcm .WAIT \ libcfgadm .WAIT \ libpicl .WAIT \ libpicltree .WAIT \ cfgadm_plugins \ libmail \ lvm \ libsmedia \ libipp \ openssl \ libdiskmgt \ liblgrp \ libfsmgt \ fm \ libavl \ libcmdutils \ libcontract \ ../cmd/sendmail/libmilter \ sasl_plugins \ udapl \ libzpool \ libzfs \ libzfs_jni \ libmapid \ brand \ policykit \ hal \ libshare \ $($(MACH)_SUBDIRS) sparc_SUBDIRS= .WAIT \ efcode \ libc_psr .WAIT \ libdscp \ libprtdiag .WAIT \ libprtdiag_psr \ librsc \ libfruutils .WAIT \ libfru \ libwrsmconf \ storage \ wrsm \ libpcp fm: libexacct # # Create a special version of $(SUBDIRS) with no .WAIT's, for use with the # clean and clobber targets (for more information, see those targets, below). # NOWAIT_SUBDIRS= $(SUBDIRS:.WAIT=) DCSUBDIRS = \ lvm MSGSUBDIRS= \ abi \ auditd_plugins \ brand \ cfgadm_plugins \ gss_mechs/mech_dh \ gss_mechs/mech_krb5 \ krb5 \ libbsm \ libc \ libcfgadm \ libcontract \ libcurses \ libdhcpsvc \ libdhcputil \ libdladm \ libgss \ libinetcfg \ libipmp \ libnsl \ libpam \ libpicl \ libpool \ libscf \ libsasl \ libldap5 \ libsecdb \ libshare \ libsldap \ libslp \ libsmedia \ libtsol \ libuutil \ libwanboot \ libwanbootutil \ libwladm \ libzonecfg \ lvm \ madv \ mpss \ pam_modules \ rpcsec_gss $(CLOSED_BUILD)MSGSUBDIRS += \ $(CLOSED)/lib/smartcard MSGSUBDIRS += \ $($(MACH)_MSGSUBDIRS) sparc_MSGSUBDIRS= \ libprtdiag \ libprtdiag_psr HDRSUBDIRS= \ auditd_plugins \ libbrand \ libbsm \ libc \ libcmdutils \ libcontract \ libcpc \ libctf \ libcurses \ libcryptoutil \ libdevice \ libdevid \ libdevinfo \ libdiskmgt \ libdladm \ libdlpi \ libdhcpagent \ libdhcpsvc \ libdhcputil \ libdisasm \ libdtrace \ libdtrace_jni \ libeti \ libfstyp \ libgen \ libwanboot \ libwanbootutil \ libipsecutil \ libinetcfg \ libinetsvc \ libinetutil \ libipmp \ libipp \ libiscsitgt \ libkstat \ libkvm \ liblaadm \ libmacadm \ libmail \ libmd \ libmtmalloc \ libnvpair \ libnsl \ libpam \ libpctx \ libpicl \ libpicltree \ libplot \ libpool \ libproc \ librcm \ libscf \ libsip \ libsmbios \ librestart \ librpcsvc \ librsm \ libsasl \ libsec \ libslp \ libsmedia \ libsysevent \ libtecla \ libtnf \ libtnfctl \ libtnfprobe \ libtsnet \ libtsol \ libvolmgt \ libumem \ libuutil \ libwladm \ libwrap \ libxcurses2 \ libzfs \ libzfs_jni \ libzoneinfo \ hal \ policykit \ lvm \ openssl \ pkcs11 \ passwdutil \ ../cmd/sendmail/libmilter \ fm \ udapl \ libmapid \ libkrb5 \ libshare \ $($(MACH)_HDRSUBDIRS) $(CLOSED_BUILD)HDRSUBDIRS += \ $(CLOSED)/lib/libc_i18n \ $(CLOSED)/lib/libike \ $(CLOSED)/lib/smartcard sparc_HDRSUBDIRS= \ libdscp \ libwrsmconf all := TARGET= all check := TARGET= check clean := TARGET= clean clobber := TARGET= clobber install := TARGET= install install_h := TARGET= install_h lint := TARGET= lint _dc := TARGET= _dc _msg := TARGET= _msg .KEEP_STATE: # # For the all and install targets, we clearly must respect library # dependencies so that the libraries link correctly. However, for # the remaining targets (check, clean, clobber, install_h, lint, _dc # and _msg), libraries do not have any dependencies on one another # and thus respecting dependencies just slows down the build. # As such, for these rules, we use pattern replacement to explicitly # avoid triggering the dependency information. Note that for clean, # clobber and lint, we must use $(NOWAIT_SUBDIRS) rather than # $(SUBDIRS), to prevent `.WAIT' from expanding to `.WAIT-nodepend'. # all: $(SUBDIRS) install: $(SUBDIRS) .WAIT install_extra # extra libraries kept in other source areas install_extra: @cd ../cmd/sgs; pwd; $(MAKE) install_lib @pwd clean clobber lint: $(NOWAIT_SUBDIRS:%=%-nodepend) install_h check: $(HDRSUBDIRS:%=%-nodepend) _msg: $(MSGSUBDIRS:%=%-nodepend) .WAIT _dc _dc: $(DCSUBDIRS:%=%-nodepend) # dependencies for pam_modules (see below) $(CLOSED_BUILD)SMARTCARD= $(CLOSED)/lib/smartcard # # Library interdependencies are called out explicitly here # auditd_plugins: libbsm libnsl libsecdb gss_mechs/mech_krb5: libgss libnsl libsocket libresolv pkcs11 libadt_jni: libbsm $(CLOSED_BUILD)libc: $(CLOSED)/lib/libc_i18n libbsm: libtsol libcmdutils: libavl libcontract: libnvpair libdevid: libdevinfo libdevinfo: libnvpair libsec libdhcpagent: libdhcputil libnsl libsocket libdhcpsvc: libinetutil libdhcputil: libinetutil libdladm: libdlpi libdevinfo libwladm libinetutil libdtrace: libproc libgen libctf libdtrace_jni: libuutil libdtrace libefi: libuuid libfstyp: libnvpair $(CLOSED_BUILD)$(CLOSED)/lib/libelfsign: \ $(CLOSED)/lib/libike libcryptoutil pkcs11 libinetcfg: libnsl libsocket libdevinfo libkmf: libcryptoutil pkcs11 openssl libnsl: libmd5 libscf libmapid: libresolv libmacadm: libdevinfo libuuid: libsocket libinetutil: libsocket libsecdb: libnsl libsasl: libgss libsocket pkcs11 libmd sasl_plugins: pkcs11 libgss libsocket libsasl libsctp: libsocket libsip: libmd5 libsocket: libnsl libldap5: libsasl libsocket libnsl libmd libsldap: libldap5 libtsol libpool: libnvpair libexacct libzonecfg: libc libsocket libnsl libuuid libnvpair libsysevent libsec \ libbrand libpool libscf libproc: ../cmd/sgs/librtld_db ../cmd/sgs/libelf libctf libproject: libpool libproc libsecdb libtsnet: libnsl libtsol libsecdb libwrap: libnsl libsocket libwanboot: libnvpair libresolv libnsl libsocket libdevinfo libinetutil \ libdhcputil openssl libwanbootutil: libnsl libwladm: libdevinfo libsocket pam_modules: libproject passwdutil $(SMARTCARD) libscf: libuutil libmd libinetsvc: libscf librestart: libuutil libscf ../cmd/sgs/libdl: ../cmd/sgs/libconv ../cmd/sgs/libelf: ../cmd/sgs/libconv pkcs11: libcryptoutil print: libldap5 udapl/udapl_tavor: udapl/libdat libzfs: libdevinfo libdevid libgen libnvpair libuutil libiscsitgt libzfs_jni: libdiskmgt libnvpair libzfs libzpool: libavl libumem libnvpair libsec: libavl brand: libc libsocket libshare: libscf libzfs libuuid libfsmgt libsecdb # # The reason this rule checks for the existence of the # Makefile is that some of the directories do not exist # in certain situations (e.g., exportable source builds, # OpenSolaris). # $(SUBDIRS): FRC @if [ -f $@/Makefile ]; then \ cd $@; pwd; $(MAKE) $(TARGET); \ else \ true; \ fi $(SUBDIRS:%=%-nodepend): @if [ -f $(@:%-nodepend=%)/Makefile ]; then \ cd $(@:%-nodepend=%); pwd; $(MAKE) $(TARGET); \ else \ true; \ fi FRC: