<?xml version="1.0"?>
<!DOCTYPE service_bundle SYSTEM "/usr/share/lib/xml/dtd/service_bundle.dtd.1">
<!--
 Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved.

 CDDL HEADER START

 The contents of this file are subject to the terms of the
 Common Development and Distribution License (the "License").
 You may not use this file except in compliance with the License.

 You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 or http://www.opensolaris.org/os/licensing.
 See the License for the specific language governing permissions
 and limitations under the License.

 When distributing Covered Code, include this CDDL HEADER in each
 file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 If applicable, add the following below this CDDL HEADER, with the
 fields enclosed by brackets "[]" replaced with your own identifying
 information: Portions Copyright [yyyy] [name of copyright owner]

 CDDL HEADER END

	NOTE:  This service manifest is not editable; its contents will
	be overwritten by package or patch operations, including
	operating system upgrade.  Make customizations in a different
	file.
-->

<service_bundle type='manifest' name='SUNWcsr:network-install'>

<service
	name='network/install'
	type='service'
	version='1'>

	<create_default_instance enabled='false' />

	<single_instance />

	<dependency
		name='ipmgmt'
		grouping='require_all'
		restart_on='none'
		type='service'>
		<service_fmri value='svc:/network/ip-interface-management' />
	</dependency>

	<dependent name='physical_default'
		grouping='optional_all'
		restart_on='none'>
		<service_fmri value='svc:/network/physical:default' />
	</dependent>

	<exec_method
		type='method'
		name='start'
		exec='/lib/svc/method/net-install'
		timeout_seconds='600' />

	<exec_method
		type='method'
		name='stop'
		exec=':true'
		timeout_seconds='0' />

	<property_group name='startd' type='framework'>
		<propval name='duration' type='astring' value='transient' />
	</property_group>

	<!-- The following property group is used only at install time to
	     configure an initial IPv4 network interface -->
	<property_group name='install_ipv4_interface' type='application'>
		<propval name='name' type='astring' value='' />
		<propval name='address_type' type='astring' value='static' />
		<propval name='static_address' type='net_address_v4'
		    value='0.0.0.0/0' />
		<propval name='dhcp_wait' type='astring' value='120' />
		<propval name='default_route' type='net_address_v4'
		    value='0.0.0.0' />
	</property_group>

	<!-- The following property group is used only at install time to
	     configure an initial IPv6 network interface -->
	<property_group name='install_ipv6_interface' type='application'>
		<propval name='name' type='astring' value='' />
		<propval name='address_type' type='astring' value='addrconf' />
		<propval name='static_address' type='net_address_v6'
		    value='::0/0' />
		<propval name='interface_id' type='net_address_v6'
		    value='::0/0' />
		<propval name='stateless' type='astring' value='yes' />
		<propval name='stateful' type='astring' value='yes'/>
		<propval name='default_route' type='net_address_v6'
		    value='::0' />
	</property_group>

	<stability value='Unstable' />

	<template>
		<common_name>
			<loctext xml:lang='C'>
				physical network interfaces install
			</loctext>
		</common_name>
		<documentation>
			<manpage title='ipadm' section='1M'
				manpath='/usr/share/man' />
		</documentation>
		<pg_pattern name='install_ipv4_interface' type='application'
		    target='this' required='false'>
			<description> <loctext xml:lang='C'>
			    Install derived configuration data used to configure an initial IPv4 physical interface.
			 </loctext> </description>
			<prop_pattern name='name' type='astring'
			    required='true'>
				<description> <loctext xml:lang='C'>
				    The "addrobj" value to be passed to the ipadm(1M) "create-addr" command.
				</loctext> </description>
				<cardinality min='1' max='1'/>
			</prop_pattern>
			<prop_pattern name='address_type' type='astring'
			    required='true'>
				<description> <loctext xml:lang='C'>
				    The "-T" option value to be passed to the ipadm(1M) "create-addr" command.
				</loctext> </description>
				<cardinality min='1' max='1'/>
				<constraints>
				<value name='static'>
					<description> <loctext xml:lang='C'>
					    Signifies that the IPv4 interface will be configured with a static address defined by the "static_address" property.
					</loctext> </description>
				</value>
				<value name='dhcp'>
					<description> <loctext xml:lang='C'>
					    Signifies that the IPv4 interface will be configured by DHCP. The "static_address" property will be ignored.
					</loctext> </description>
				</value>
				</constraints>
			</prop_pattern>
			<prop_pattern name='static_address'
			    type='net_address_v4' required='false'>
				<description> <loctext xml:lang='C'>
				    The "local" address value to be passed to the ipadm(1M) "create-addr" command. Only required if "address_type" has a value of "static".
				</loctext> </description>
				<cardinality min='1' max='1'/>
			</prop_pattern>
			<prop_pattern name='dhcp_wait' type='astring'
			    required='false'>
				<description> <loctext xml:lang='C'>
				    The "-w" option value to be passed to the ipadm(1M) "create-addr" command. Represents the maximum time to wait for DHCP offer.
				</loctext> </description>
				<units>
				    <loctext xml:lang='C'>seconds</loctext>
				</units>
				<cardinality min='1' max='1'/>
			</prop_pattern>
			<prop_pattern name='default_route'
			    type='net_address_v4' required='false'>
				<description> <loctext xml:lang='C'>
				    The default route associated with this interface. Used to add a default route using route(1M).
				</loctext> </description>
				<cardinality min='1' max='1'/>
			</prop_pattern>
		</pg_pattern>
		<pg_pattern name='install_ipv6_interface' type='application'
			target='this' required='false'>
			<description> <loctext xml:lang='C'>
			    Install derived configuration data used to configure an initial IPv6 physical interface.
			</loctext> </description>
			<prop_pattern name='name' type='astring'
			    required='true'>
				<description> <loctext xml:lang='C'>
				    The "addrobj" value to be passed to the ipadm(1M) "create-addr" command.
				</loctext> </description>
				<cardinality min='1' max='1'/>
			</prop_pattern>
			<prop_pattern name='address_type' type='astring'
			    required='true'>
				<description> <loctext xml:lang='C'>
				    The "-T" option value to be passed to the ipadm(1M) "create-addr" command.
				</loctext> </description>
				<cardinality min='1' max='1'/>
				<constraints>
				<value name='static'>
					<description> <loctext xml:lang='C'>
					    Signifies that the IPv4 interface will be configured with a static address defined by the "static_address" property.
					</loctext> </description>
				</value>
				<value name='addrconf'>
					<description> <loctext xml:lang='C'>
					    Signifies that the IPv6 interface will be configured by IPv6 auto-configuration. The "static_address" property will be ignored.
					</loctext> </description>
				</value>
				</constraints>
			</prop_pattern>
			<prop_pattern name='static_address'
			    type='net_address_v6' required='false'>
				<description> <loctext xml:lang='C'>
				    The "local" address value to be passed to the ipadm(1M) "create-addr" command. Only required if "address_type" has a value of "static".
				</loctext> </description>
				<cardinality min='1' max='1'/>
			</prop_pattern>
			<prop_pattern name='interface_id'
			    type='net_address_v6' required='false'>
				<description> <loctext xml:lang='C'>
				    The "-i" token value to be passed to the ipadm(1M) "create-addr" command. Ignored if "address_type" has a value of "static".
				</loctext> </description>
				<cardinality min='1' max='1'/>
			</prop_pattern>

			<prop_pattern name='stateless'
			    type='astring' required='false'>
				<description> <loctext xml:lang='C'>
				    The "stateless" value to be passed to the ipadm(1M) "create-addr" command. Ignored if "address_type" has a value of "static".
				</loctext> </description>
				<cardinality min='1' max='1'/>
				<constraints>
				<value name='yes'/>
				<value name='no'/>
				</constraints>
			</prop_pattern>
			<prop_pattern name='stateful'
			    type='astring' required='false'>
				<description> <loctext xml:lang='C'>
				    The "stateful" value to be passed to the ipadm(1M) "create-addr" command. Ignored if "address_type" has a value of "static".
				</loctext> </description>
				<cardinality min='1' max='1'/>
				<constraints>
				<value name='yes'/>
				<value name='no'/>
				</constraints>
			</prop_pattern>
			<prop_pattern name='default_route'
			    type='net_address_v6' required='false'>
				<description> <loctext xml:lang='C'>
				    The default route associated with this interface. Used to add a default route using route(1M).
				</loctext> </description>
				<cardinality min='1' max='1'/>
			</prop_pattern>
		</pg_pattern>
	</template>
</service>

</service_bundle>