#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#

#
# Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
# Use is subject to license terms.
#
# ident	"%Z%%M%	%I%	%E% SMI"
#

#
# Makefile.master, global definitions for system source
#
ROOT=		/proto

# Historically, ON builds were always done with root permissions, and the
# owner/group information was duplicated in the Makefiles and the packaging
# data and kept in sync by manual intervention.  This is no longer true.
# The only source of this information is packaging.  The proto area ($ROOT)
# does not have definitive onwer/group information, and no Makefile should
# attempt to set this.  CH once toggled operations restricted to root.  It
# is now just set to `#'.
#
# At some point in the future, CH, CHOWN, CHGRP, OWNER, and GROUP should all
# be stripped completely from the source base.  They are kept for now until
# on10-based projects can merge and transition away from them.
#
# RELEASE_BUILD should be cleared for final release builds. This is completely
# independent of CH. NOT_RELEASE_BUILD is exactly what the name implies.
#
# INTERNAL_RELEASE_BUILD is a subset of RELEASE_BUILD. It mostly controls
# identification strings. Enabling RELEASE_BUILD automatically enables
# INTERNAL_RELEASE_BUILD.
#
# EXPORT_RELEASE_BUILD controls whether binaries are built in a form that
# can be released for export under a binary license.  It is orthogonal to
# the other *RELEASE_BUILD settings.  ("#" means do an export release
# build, "" means do a normal build.)
#
# CLOSED_BUILD controls whether we try to build files under
# usr/closed.  ("" means to build closed code, "#" means don't try to
# build it.)  Skipping the closed code implies doing an export release
# build.
#
# STRIP_COMMENTS toggles comment section striping. Generally the same setting
# as INTERNAL_RELEASE_BUILD.
#
# __GNUC toggles the building of ON components using gcc and related tools.
# Normally set to `#', set it to `' to do gcc build.
#
# The declaration POUND_SIGN is always '#'. This is needed to get around the
# make feature that '#' is always a comment delimiter, even when escaped or
# quoted.  The only way of generating this is the :sh macro mechanism.  Note
# however that in general :sh macros should be avoided in makefiles that are
# widely included into other makefiles, as the resulting shell executions can
# cause a noticable slowdown in build times.
#
POUND_SIGN:sh=				echo \\043
CH=					$(POUND_SIGN)

NOT_RELEASE_BUILD=
INTERNAL_RELEASE_BUILD=			$(POUND_SIGN)
RELEASE_BUILD=				$(POUND_SIGN)
$(RELEASE_BUILD)NOT_RELEASE_BUILD=	$(POUND_SIGN)
$(RELEASE_BUILD)INTERNAL_RELEASE_BUILD=
PATCH_BUILD=				$(POUND_SIGN)

# If CLOSED_IS_PRESENT is not set, assume the closed tree is present.
CLOSED_BUILD_1=	$(CLOSED_IS_PRESENT:yes=)
CLOSED_BUILD=	$(CLOSED_BUILD_1:no=$(POUND_SIGN))

EXPORT_RELEASE_BUILD=			$(POUND_SIGN)
$(CLOSED_BUILD)EXPORT_RELEASE_BUILD=

# SPARC_BLD is '#' for an Intel build.
# INTEL_BLD is '#' for a Sparc build.
SPARC_BLD_1=    $(MACH:i386=$(POUND_SIGN))
SPARC_BLD=      $(SPARC_BLD_1:sparc=)
INTEL_BLD_1=    $(MACH:sparc=$(POUND_SIGN))
INTEL_BLD=      $(INTEL_BLD_1:i386=)

STRIP_COMMENTS=	$(INTERNAL_RELEASE_BUILD)

# set __GNUC= in the environment to build 32-bit with the gcc compiler.
# The default is to use the Sun Studio 10 compiler for all processor types.
__GNUC=		$(POUND_SIGN)

# set __GNUC64= in the environment to build 64-bit with the gcc compiler.
# The default is to use the Sun Studio 10 compiler by using the __GNUC
# setting.
__GNUC64=	$(__GNUC)

# CLOSED is the root of the tree that contains source which isn't released
# as open source
CLOSED=		$(SRC)/../closed

# BUILD_TOOLS is the root of all tools including compilers.
# ONBLD_TOOLS is the root of all the tools that are part of SUNWonbld.

BUILD_TOOLS=		/ws/onnv-tools
ONBLD_TOOLS=		$(BUILD_TOOLS)/onbld

JAVA_ROOT=	/usr/java

SFW_ROOT=	/usr/sfw
SFWINCDIR=	$(SFW_ROOT)/include
SFWLIBDIR=	$(SFW_ROOT)/lib
SFWLIBDIR64=	$(SFW_ROOT)/lib/$(MACH64)

RPCGEN=		/usr/bin/rpcgen
STABS=		$(ONBLD_TOOLS)/bin/$(MACH)/stabs
ECHO=		echo
INS=		install
TRUE=		true
SYMLINK=	/usr/bin/ln -s
LN=		/usr/bin/ln
CHMOD=		/usr/bin/chmod
CHOWN=		$(TRUE)
CHGRP=		$(TRUE)
MV=		/usr/bin/mv -f
RM=		/usr/bin/rm -f
GREP=		/usr/bin/grep
SED=		/usr/bin/sed
NAWK=		/usr/bin/nawk
CP=		/usr/bin/cp -f
MCS=		/usr/ccs/bin/mcs
CAT=            /usr/bin/cat
M4=		/usr/ccs/bin/m4
STRIP=		/usr/ccs/bin/strip
LEX=		/usr/ccs/bin/lex
YACC=		/usr/ccs/bin/yacc
CPP=		/usr/lib/cpp
JAVAC=		$(JAVA_ROOT)/bin/javac
JAVAH=		$(JAVA_ROOT)/bin/javah
JAVADOC=	$(JAVA_ROOT)/bin/javadoc
RMIC=		$(JAVA_ROOT)/bin/rmic
JAR=		$(JAVA_ROOT)/bin/jar
CTFCONVERT=	$(ONBLD_TOOLS)/bin/$(MACH)/ctfconvert
CTFMERGE=	$(ONBLD_TOOLS)/bin/$(MACH)/ctfmerge
CTFSTABS=	$(ONBLD_TOOLS)/bin/$(MACH)/ctfstabs
GENOFFSETS=	$(ONBLD_TOOLS)/bin/genoffsets
CTFCVTPTBL=	$(ONBLD_TOOLS)/bin/ctfcvtptbl
CTFFINDMOD=	$(ONBLD_TOOLS)/bin/ctffindmod
XREF=		$(ONBLD_TOOLS)/bin/xref
FIND=		/usr/bin/find
PERL=		/usr/bin/perl
SORT=		/usr/bin/sort
TOUCH=		/usr/bin/touch
WC=		/usr/bin/wc
XARGS=		/usr/bin/xargs
ELFSIGN=	/usr/bin/elfsign
DTRACE=		/usr/sbin/dtrace

FILEMODE=	644
DIRMODE=	755

# Note: owner and group for proto area objects is no longer set by
# Makefiles at all.  These have no real effect and are kept here for
# transition purposes.  They (along with CH, CHOWN, and CHGRP) should be
# removed early in the s11 development cycle.
OWNER=		root
GROUP=		bin

#
# The version of the patch makeup table optimized for build-time use.  Used
# during patch builds only.
$(PATCH_BUILD)PMTMO_FILE=$(SRC)/patch_makeup_table.mo

# Declare that nothing should be built in parallel.
# Individual Makefiles can use the .PARALLEL target to declare otherwise.
.NO_PARALLEL:

# For stylistic checks
#
# Note that the X and C checks are not used at this time and may need
# modification when they are actually used.
#
CSTYLE=		cstyle
CSTYLE_TAIL=
HDRCHK=		hdrchk
HDRCHK_TAIL=
JSTYLE=		jstyle

DOT_H_CHECK=	\
	@$(ECHO) "checking $<"; $(CSTYLE) $< $(CSTYLE_TAIL); \
	$(HDRCHK) $< $(HDRCHK_TAIL)

DOT_X_CHECK=	\
	@$(ECHO) "checking $<"; $(RPCGEN) -C -h $< | $(CSTYLE) $(CSTYLE_TAIL); \
	$(RPCGEN) -C -h $< | $(HDRCHK) $< $(HDRCHK_TAIL)

DOT_C_CHECK=	\
	@$(ECHO) "checking $<"; $(CSTYLE) $< $(CSTYLE_TAIL)

MANIFEST_CHECK=	\
	@$(ECHO) "checking $<"; \
	SVCCFG_DTD=$(SRC)/cmd/svc/dtd/service_bundle.dtd.1 \
	$(SRC)/cmd/svc/svccfg/svccfg-native validate $<

INS.file=	$(RM) $@; $(INS) -s -m $(FILEMODE) -f $(@D) $<
INS.dir=	$(INS) -s -d -m $(DIRMODE) $@
# installs and renames at once
#
INS.rename=	$(INS.file); $(MV) $(@D)/$(<F) $@

# install a link
INSLINKTARGET=	$<
INS.link=	$(RM) $@; $(LN) $(INSLINKTARGET) $@

# MACH must be set in the shell environment per uname -p on the build host
# More specific architecture variables should be set in lower makefiles.
#
# MACH64 is derived from MACH, and BUILD64 is set to `#' for
# architectures on which we do not build 64-bit versions.
# (There are no such architectures at the moment.)
#
# Set BUILD64=# in the environment to disable 64-bit amd64
# builds on i386 machines.

MACH64_1=	$(MACH:sparc=sparcv9)
MACH64=		$(MACH64_1:i386=amd64)

MACH32_1=	$(MACH:sparc=sparcv7)
MACH32=		$(MACH32_1:i386=i86)

sparc_BUILD64=
i386_BUILD64=
BUILD64=	$($(MACH)_BUILD64)

#
# C compiler mode. Future compilers may change the default on us,
# so force extended ANSI mode globally. Lower level makefiles can
# override this by setting CCMODE.
#
CCMODE=			-Xa
CCMODE64=		-Xa

#
# C compiler verbose mode. This is so we can enable it globally,
# but turn it off in the lower level makefiles of things we cannot
# (or aren't going to) fix.
#
CCVERBOSE=		-v

# set this to the secret flag "-Wc,-Qiselect-v9abiwarn=1" to get warnings
# from the compiler about places the -xarch=v9 may differ from -xarch=v9c.
V9ABIWARN=

# set this to the secret flag "-Wc,-Qiselect-regsym=0" to disable register
# symbols (used to detect conflicts between objects that use global registers)
# we disable this now for safety, and because genunix doesn't link with
# this feature (the v9 default) enabled.
#
# REGSYM is separate since the C++ driver syntax is different.
CCREGSYM=		-Wc,-Qiselect-regsym=0
CCCREGSYM=		-Qoption cg -Qiselect-regsym=0

#
# generate 32-bit addresses in the v9 kernel. Saves memory.
CCABS32=		-Wc,-xcode=abs32

# One optimization the compiler might perform is to turn this:
#	#pragma weak foo
#	extern int foo;
#	if (&foo)
#		foo = 5;
# into
#	foo = 5;
# Since we do some of this (foo might be referenced in common kernel code
# but provided only for some cpu modules or platforms), we disable this
# optimization.
# 
sparc_CCUNBOUND	= -Wd,-xsafe=unboundsym
i386_CCUNBOUND	=
CCUNBOUND	= $($(MACH)_CCUNBOUND)

#
# compiler '-xarch' flag. This is here to centralize it and make it
# overridable for testing.
sparc_XARCH=		-xarch=v8
sparcv9_XARCH=		-xarch=v9
i386_XARCH=
amd64_XARCH=		-xarch=amd64 -Ui386 -U__i386

# assembler '-xarch' flag.  Different from compiler '-xarch' flag.
sparc_AS_XARCH=		-xarch=v8
sparcv9_AS_XARCH=	-xarch=v9
i386_AS_XARCH=
amd64_AS_XARCH=		-xarch=amd64 -P -Ui386 -U__i386

#
# These flags define what we need to be 'standalone' i.e. -not- part
# of the rather more cosy userland environment.  This basically means
# the kernel.
#
# XX64	future versions of gcc will make -mcmodel=kernel imply -mno-red-zone
#
sparc_STAND_FLAGS=	-_gcc=-ffreestanding
sparcv9_STAND_FLAGS=	-_gcc=-ffreestanding
i386_STAND_FLAGS=	-_gcc=-ffreestanding
amd64_STAND_FLAGS=	-Wu,-xmodel=kernel

SAVEARGS=		-Wu,-save_args
amd64_STAND_FLAGS	+= $(SAVEARGS)

STAND_FLAGS_32 = $($(MACH)_STAND_FLAGS)
STAND_FLAGS_64 = $($(MACH64)_STAND_FLAGS)

#
# disable the incremental linker
ILDOFF=			-xildoff
#
XDEPEND=		-xdepend
XFFLAG=			-xF
XESS=			-xs
XSTRCONST=		-xstrconst 

#
# turn warnings into errors (C)
CERRWARN = -errtags=yes -errwarn=%all
CERRWARN += -erroff=E_EMPTY_TRANSLATION_UNIT
CERRWARN += -erroff=E_STATEMENT_NOT_REACHED

#
# turn warnings into errors (C++)
CCERRWARN=		-xwe

# C99 mode
C99_ENABLE=	-xc99=%all
C99_DISABLE=	-xc99=%none
C99MODE=	$(C99_DISABLE)
C99LMODE=	$(C99MODE:-xc99%=-Xc99%)

# In most places, assignments to these macros should be appended with +=
# (CPPFLAGS.master allows values to be prepended to CPPFLAGS).
sparc_CFLAGS=	$(sparc_XARCH)
sparcv9_CFLAGS=	$(sparcv9_XARCH) -dalign $(CCVERBOSE) $(V9ABIWARN) $(CCREGSYM)
i386_CFLAGS=	$(i386_XARCH)
amd64_CFLAGS=	$(amd64_XARCH)

sparc_ASFLAGS=	$(sparc_AS_XARCH)
sparcv9_ASFLAGS=$(sparcv9_AS_XARCH)
i386_ASFLAGS=	$(i386_AS_XARCH)
amd64_ASFLAGS=	$(amd64_AS_XARCH)

#
sparc_COPTFLAG=		-xO3
sparcv9_COPTFLAG=	-xO3
i386_COPTFLAG=		-O
amd64_COPTFLAG=		-xO3

COPTFLAG= $($(MACH)_COPTFLAG)
COPTFLAG64= $($(MACH64)_COPTFLAG)

# When -g is used, the compiler globalizes static objects
# (gives them a unique prefix). Disable that.
CNOGLOBAL= -W0,-noglobal

# Normally, gcc uses indirect DWARF strings to save space.  However,
# this causes relocations that ctfconvert cannot handle.  Disable this.
CDWARFSTR=	-_gcc=-fno-dwarf2-indirect-strings

# Sometimes we want all symbols and types in debugging information even
# if they aren't used.
CALLSYMS=	-W0,-xdbggen=no%usedonly

#
# Flags used to build in debug mode for ctf generation.  Bugs in the Devpro
# compilers currently prevent us from building with cc-emitted DWARF.
#
CTF_FLAGS_sparc	= -g -Wc,-Qiselect-T1 $(C99MODE) $(CNOGLOBAL) $(CDWARFSTR)
CTF_FLAGS_i386	= -g $(C99MODE) $(CNOGLOBAL) $(CDWARFSTR)
CTF_FLAGS	= $(CTF_FLAGS_$(MACH))

#
# Flags used with genoffsets
#
GOFLAGS = -_noecho \
	$(CALLSYMS) \
	$(CDWARFSTR)

OFFSETS_CREATE = $(GENOFFSETS) -s $(CTFSTABS) -r $(CTFCONVERT) \
	$(CC) $(GOFLAGS) $(CFLAGS) $(CPPFLAGS)

OFFSETS_CREATE64 = $(GENOFFSETS) -s $(CTFSTABS) -r $(CTFCONVERT) \
	$(CC) $(GOFLAGS) $(CFLAGS64) $(CPPFLAGS)

#
# tradeoff time for space (smaller is better)
#
sparc_SPACEFLAG		= -xspace -W0,-Lt -W2,-Rcond_elim
sparcv9_SPACEFLAG	= -xspace -W0,-Lt -W2,-Rcond_elim
i386_SPACEFLAG		= -xspace
amd64_SPACEFLAG		=

SPACEFLAG		= $($(MACH)_SPACEFLAG)
SPACEFLAG64		= $($(MACH64)_SPACEFLAG)

sparc_XREGSFLAG		= -xregs=no%appl
sparcv9_XREGSFLAG	= -xregs=no%appl
i386_XREGSFLAG		=
amd64_XREGSFLAG		=

XREGSFLAG		= $($(MACH)_XREGSFLAG)
XREGSFLAG64		= $($(MACH64)_XREGSFLAG)

CFLAGS=         $(COPTFLAG) $($(MACH)_CFLAGS) $(SPACEFLAG) $(CCMODE) \
		$(ILDOFF) $(CERRWARN) $(C99MODE) $(CCUNBOUND)
CFLAGS64=       $(COPTFLAG64) $($(MACH64)_CFLAGS) $(SPACEFLAG64) $(CCMODE64) \
		$(ILDOFF) $(CERRWARN) $(C99MODE) $(CCUNBOUND)
NATIVE_CFLAGS=	$(COPTFLAG) $($(NATIVE_MACH)_CFLAGS) $(CCMODE) \
		$(ILDOFF) $(CERRWARN) $(C99MODE) $($(NATIVE_MACH)_CCUNBOUND)

DTEXTDOM=-DTEXT_DOMAIN=\"$(TEXT_DOMAIN)\"	# For messaging.
DTS_ERRNO=-D_TS_ERRNO
CPPFLAGS.master=$(DTEXTDOM) $(DTS_ERRNO) \
	$(ENVCPPFLAGS1) $(ENVCPPFLAGS2) $(ENVCPPFLAGS3) $(ENVCPPFLAGS4)
CPPFLAGS=	$(CPPFLAGS.master)
AS_CPPFLAGS=	$(CPPFLAGS.master)
JAVAFLAGS=	-deprecation

#
# For source message catalogue
#
.SUFFIXES: $(SUFFIXES) .i .po
MSGROOT= $(ROOT)/catalog
MSGDOMAIN= $(MSGROOT)/$(TEXT_DOMAIN)
MSGDOMAINPOFILE = $(MSGDOMAIN)/$(POFILE)
DCMSGDOMAIN= $(MSGROOT)/LC_TIME/$(TEXT_DOMAIN) 
DCMSGDOMAINPOFILE = $(DCMSGDOMAIN)/$(DCFILE:.dc=.po)

CLOBBERFILES += $(POFILE) $(POFILES)
COMPILE.cpp= $(CC) -E -C $(CFLAGS) $(CPPFLAGS)
XGETTEXT= /usr/bin/xgettext
XGETFLAGS= -c TRANSLATION_NOTE
BUILD.po= $(XGETTEXT) $(XGETFLAGS) -d $(<F) $<.i ;\
	$(RM)	$@ ;\
	sed "/^domain/d" < $(<F).po > $@ ;\
	$(RM) $(<F).po $<.i
#
# This is overwritten by local Makefile when PROG is a list.
#
POFILE= $(PROG).po

sparc_CCFLAGS=		-cg92 -compat=4 \
			-Qoption ccfe -messages=no%anachronism \
			$(CCERRWARN)
sparcv9_CCFLAGS=	$(sparcv9_XARCH) -dalign -compat=5 \
			-Qoption ccfe -messages=no%anachronism \
			-Qoption ccfe -features=no%conststrings \
			$(CCCREGSYM) \
			$(CCERRWARN)
i386_CCFLAGS=		-compat=4 \
			-Qoption ccfe -messages=no%anachronism \
			-Qoption ccfe -features=no%conststrings \
			$(CCERRWARN)
amd64_CCFLAGS=		$(amd64_XARCH) -compat=5 \
			-Qoption ccfe -messages=no%anachronism \
			-Qoption ccfe -features=no%conststrings \
			$(CCERRWARN)

sparc_CCOPTFLAG=	-O
sparcv9_CCOPTFLAG=	-O
i386_CCOPTFLAG=		-O
amd64_CCOPTFLAG=	-O

CCOPTFLAG=	$($(MACH)_CCOPTFLAG)
CCOPTFLAG64=	$($(MACH64)_CCOPTFLAG)
CCFLAGS=	$(CCOPTFLAG) $($(MACH)_CCFLAGS)
CCFLAGS64=	$(CCOPTFLAG64) $($(MACH64)_CCFLAGS)
#
# Used by Makefile.cmd, Makefile.lib and Makefile.ucbcmd
#
PGA_MAPFILE =	$(SRC)/cmd/sgs/mapfiles/$(MACH)/map.pagealign
#
# 
# LDLIBS32 can be set in the environment to override the following assignment.
# LDLIBS64 can be set to override the assignment made in Makefile.master.64.
# These environment settings make sure that no libraries are searched outside
# of the local workspace proto area:
#	LDLIBS32=-YP,$ROOT/lib:$ROOT/usr/lib
#	LDLIBS64=-YP,$ROOT/lib/$MACH64:$ROOT/usr/lib/$MACH64
#
LDLIBS32 =	$(ENVLDLIBS1) $(ENVLDLIBS2) $(ENVLDLIBS3)
LDLIBS.cmd = 	$(LDLIBS32)
LDLIBS.lib =	$(LDLIBS32)
#
# Define compilation macros.
#
COMPILE.c=	$(CC) $(CFLAGS) $(CPPFLAGS) -c
COMPILE64.c=	$(CC) $(CFLAGS64) $(CPPFLAGS) -c
COMPILE.cc=	$(CCC) $(CCFLAGS) $(CPPFLAGS) -c
COMPILE64.cc=	$(CCC) $(CCFLAGS64) $(CPPFLAGS) -c
COMPILE.s=	$(AS) $(ASFLAGS) $(AS_CPPFLAGS)
COMPILE64.s=	$(AS) $(ASFLAGS) $($(MACH64)_AS_XARCH) $(AS_CPPFLAGS)
COMPILE.d=	$(DTRACE) -G -32
COMPILE64.d=	$(DTRACE) -G -64

CLASSPATH=	.
COMPILE.java=	$(JAVAC) $(JAVAFLAGS) -classpath $(CLASSPATH)

#
# Link time macros
#
CCNEEDED		= -lC
$(__GNUC)CCNEEDED	= -L$(SFWLIBDIR) -R$(SFWLIBDIR) -lstdc++ -lgcc_s

LINK.c=		$(CC) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS)
LINK64.c=	$(CC) $(CFLAGS64) $(CPPFLAGS) $(LDFLAGS)
NORUNPATH=	-norunpath -nolib
LINK.cc=	$(CCC) $(CCFLAGS) $(CPPFLAGS) $(NORUNPATH) \
		$(LDFLAGS) $(CCNEEDED)
LINK64.cc=	$(CCC) $(CCFLAGS64) $(CPPFLAGS) $(NORUNPATH) \
		$(LDFLAGS) $(CCNEEDED)

#
# lint macros
#
# Note that the undefine of __PRAGMA_REDEFINE_EXTNAME can be removed once
# ON is built with a version of lint that has the fix for 4484186.
#
ALWAYS_LINT_DEFS =	-errtags=yes -s
ALWAYS_LINT_DEFS +=	-erroff=E_PTRDIFF_OVERFLOW
ALWAYS_LINT_DEFS +=	-erroff=E_ASSIGN_NARROW_CONV
ALWAYS_LINT_DEFS +=	-U__PRAGMA_REDEFINE_EXTNAME
ALWAYS_LINT_DEFS +=	$(C99LMODE)
ALWAYS_LINT_DEFS +=	-errsecurity=$(SECLEVEL)
ALWAYS_LINT_DEFS +=	-erroff=E_SEC_CREAT_WITHOUT_EXCL
ALWAYS_LINT_DEFS +=	-erroff=E_SEC_FORBIDDEN_WARN_CREAT
# XX64 -- really only needed for amd64 lint
ALWAYS_LINT_DEFS +=	-erroff=E_ASSIGN_INT_TO_SMALL_INT
ALWAYS_LINT_DEFS +=	-erroff=E_CAST_INT_CONST_TO_SMALL_INT
ALWAYS_LINT_DEFS +=	-erroff=E_CAST_INT_TO_SMALL_INT
ALWAYS_LINT_DEFS +=	-erroff=E_CAST_TO_PTR_FROM_INT
ALWAYS_LINT_DEFS +=	-erroff=E_COMP_INT_WITH_LARGE_INT
ALWAYS_LINT_DEFS +=	-erroff=E_INTEGRAL_CONST_EXP_EXPECTED
ALWAYS_LINT_DEFS +=	-erroff=E_PASS_INT_TO_SMALL_INT
ALWAYS_LINT_DEFS +=	-erroff=E_PTR_CONV_LOSES_BITS

SECLEVEL=	core
LINT.c=		$(LINT) $(LINTFLAGS) $(CPPFLAGS) $(ALWAYS_LINT_DEFS)
LINT64.c=	$(LINT) $(LINTFLAGS64) $(CPPFLAGS) $(ALWAYS_LINT_DEFS)
LINT.s=		$(LINT.c)

# For some future builds, NATIVE_MACH and MACH might be different.
# Therefore, NATIVE_MACH needs to be redefined in the
# environment as `uname -p` to override this macro.
#
# For now at least, we cross-compile amd64 on i386 machines.
NATIVE_MACH=	$(MACH:amd64=i386)

# Define native compilation macros
#

# Base directory where compilers are loaded.
# Defined here so it can be overridden by developer.
#
SPRO_ROOT=		$(BUILD_TOOLS)/SUNWspro
SPRO_VROOT=		$(SPRO_ROOT)/SOS10
GNU_ROOT=		$(SFW_ROOT)

# Specify platform compiler versions for languages
# that we use (currently only c and c++).
#
sparc_CC=		$(ONBLD_TOOLS)/bin/$(MACH)/cw -_cc
$(__GNUC)sparc_CC=	$(ONBLD_TOOLS)/bin/$(MACH)/cw -_gcc
sparc_CCC=		$(ONBLD_TOOLS)/bin/$(MACH)/cw -_CC
$(__GNUC)sparc_CCC=	$(ONBLD_TOOLS)/bin/$(MACH)/cw -_g++
sparc_CPP=		/usr/ccs/lib/cpp
sparc_AS=		/usr/ccs/bin/as -xregsym=no
sparc_LD=		/usr/ccs/bin/ld
sparc_LINT=		$(SPRO_VROOT)/bin/lint

sparcv9_CC=		$(ONBLD_TOOLS)/bin/$(MACH)/cw -_cc
$(__GNUC64)sparcv9_CC=	$(ONBLD_TOOLS)/bin/$(MACH)/cw -_gcc
sparcv9_CCC=		$(ONBLD_TOOLS)/bin/$(MACH)/cw -_CC
$(__GNUC64)sparcv9_CCC=	$(ONBLD_TOOLS)/bin/$(MACH)/cw -_g++
sparcv9_CPP=		/usr/ccs/lib/cpp
sparcv9_AS=		/usr/ccs/bin/as -xregsym=no
sparcv9_LD=		/usr/ccs/bin/ld
sparcv9_LINT=		$(SPRO_VROOT)/bin/lint

# We compile 32-bit objects with cc by default
i386_CC=		$(ONBLD_TOOLS)/bin/$(MACH)/cw -_cc
$(__GNUC)i386_CC=	$(ONBLD_TOOLS)/bin/$(MACH)/cw -_gcc
i386_CCC=		$(ONBLD_TOOLS)/bin/$(MACH)/cw -_CC
$(__GNUC)i386_CCC=	$(ONBLD_TOOLS)/bin/$(MACH)/cw -_g++
i386_CPP=		/usr/ccs/lib/cpp
i386_AS=		/usr/ccs/bin/as
$(__GNUC)i386_AS=	$(ONBLD_TOOLS)/bin/$(MACH)/aw
i386_LD=		/usr/ccs/bin/ld
i386_LINT=		$(SPRO_VROOT)/bin/lint

# We compile 64-bit objects with gcc
amd64_CC=		$(ONBLD_TOOLS)/bin/$(MACH)/cw -_cc
$(__GNUC64)amd64_CC=	$(ONBLD_TOOLS)/bin/$(MACH)/cw -_gcc
amd64_CCC=		$(ONBLD_TOOLS)/bin/$(MACH)/cw -_CC
$(__GNUC64)amd64_CCC=	$(ONBLD_TOOLS)/bin/$(MACH)/cw -_g++
amd64_CPP=		/usr/ccs/lib/cpp
amd64_AS=		$(ONBLD_TOOLS)/bin/$(MACH)/aw
amd64_LD=		/usr/ccs/bin/ld
amd64_LINT=		$(SPRO_VROOT)/bin/lint

NATIVECC=		$($(NATIVE_MACH)_CC)
NATIVECCC=		$($(NATIVE_MACH)_CCC)
NATIVECPP=		$($(NATIVE_MACH)_CPP)
NATIVEAS=		$($(NATIVE_MACH)_AS)
NATIVELD=		$($(NATIVE_MACH)_LD)
NATIVELINT=		$($(NATIVE_MACH)_LINT)

#
# Makefile.master.64 overrides these settings
#
CC=			$(NATIVECC)
CCC=			$(NATIVECCC)
CPP=			$(NATIVECPP)
AS=			$(NATIVEAS)
LD=			$(NATIVELD)
LINT=			$(NATIVELINT)

# The real compilers used for this build
CW_CC_CMD=		$(CC) -_compiler
CW_CCC_CMD=		$(CCC) -_compiler
REAL_CC=		$(CW_CC_CMD:sh)
REAL_CCC=		$(CW_CCC_CMD:sh)

# Pass -Y flag to cpp (method of which is release-dependent)
CCYFLAG=		-Y I,

BDIRECT=	-Bdirect
BDYNAMIC=	-Bdynamic
BLOCAL=		-Blocal
BREDUCE=	-Breduce
BSTATIC=	-Bstatic
BSYMBOLIC=	-Bsymbolic

ZCOMBRELOC=	-zcombreloc
ZDEFS=		-zdefs
ZIGNORE=	-zignore
ZINITFIRST=	-zinitfirst
ZINTERPOSE=	-zinterpose
ZLAZYLOAD=	-zlazyload
ZLOADFLTR=	-zloadfltr
ZMULDEFS=	-zmuldefs
ZNODEFAULTLIB=	-znodefaultlib
ZNODEFS=	-znodefs
ZNODELETE=	-znodelete
ZNODLOPEN=	-znodlopen
ZNODUMP=	-znodump
ZNOLAZYLOAD=	-znolazyload
ZNORELOC=	-znoreloc
ZNOVERSION=	-znoversion
ZREDLOCSYM=	-zredlocsym
ZTEXT=		-ztext

GSHARED=	-G
CCMT=		-mt

# Handle different PIC models on different ISAs
# (May be overridden by lower-level Makefiles)

sparc_C_PICFLAGS =	-K pic
sparcv9_C_PICFLAGS =	-K pic
i386_C_PICFLAGS =	-K pic
amd64_C_PICFLAGS =	-K pic
C_PICFLAGS =		$($(MACH)_C_PICFLAGS)
C_PICFLAGS64 =		$($(MACH64)_C_PICFLAGS)

sparc_C_BIGPICFLAGS =	-K PIC
sparcv9_C_BIGPICFLAGS =	-K PIC
i386_C_BIGPICFLAGS =	-K PIC
amd64_C_BIGPICFLAGS =	-K PIC
C_BIGPICFLAGS =		$($(MACH)_C_BIGPICFLAGS)
C_BIGPICFLAGS64 =	$($(MACH64)_C_BIGPICFLAGS)

# CC requires there to be no space between '-K' and 'pic' or 'PIC'.
sparc_CC_PICFLAGS =	-Kpic
sparcv9_CC_PICFLAGS =	-KPIC
i386_CC_PICFLAGS = 	-Kpic
amd64_CC_PICFLAGS = 	-Kpic
CC_PICFLAGS =		$($(MACH)_CC_PICFLAGS)
CC_PICFLAGS64 =		$($(MACH64)_CC_PICFLAGS)

AS_PICFLAGS=		$(C_PICFLAGS)
AS_BIGPICFLAGS=		$(C_BIGPICFLAGS)

#
# Default label for CTF sections
#
CTFCVTFLAGS=		-i -L VERSION

#
# Override to pass module-specific flags to ctfmerge.  Currently used
# only by krtld to turn on fuzzy matching.
#
CTFMRGFLAGS=

CTFCONVERT_O		= $(CTFCONVERT) $(CTFCVTFLAGS) $@

ELFSIGN_O=	$(TRUE)
ELFSIGN_CRYPTO=	$(ELFSIGN_O)
ELFSIGN_OBJECT=	$(ELFSIGN_O)
$(EXPORT_RELEASE_BUILD)ELFSIGN_O =	$(ELFSIGN)
$(EXPORT_RELEASE_BUILD)ELFSIGN_KEY =	\
			$(CLOSED)/cmd/cmd-crypto/etc/keys/SUNWosnet
$(EXPORT_RELEASE_BUILD)ELFSIGN_CERT=	\
			$(CLOSED)/cmd/cmd-crypto/etc/certs/SUNWosnet
$(EXPORT_RELEASE_BUILD)ELFSIGN_SEKEY =	\
			$(CLOSED)/cmd/cmd-crypto/etc/keys/SUNWosnetSolaris
$(EXPORT_RELEASE_BUILD)ELFSIGN_SECERT=	\
			$(CLOSED)/cmd/cmd-crypto/etc/certs/SUNWosnetSolaris
$(EXPORT_RELEASE_BUILD)ELFSIGN_CRYPTO=	$(ELFSIGN_O) sign \
			$(ELFSIGN_FORMAT_OPTION) \
			-k $(ELFSIGN_KEY) -c $(ELFSIGN_CERT) -e $@
$(EXPORT_RELEASE_BUILD)ELFSIGN_OBJECT=	$(ELFSIGN_O) sign \
			$(ELFSIGN_FORMAT_OPTION) \
			-k $(ELFSIGN_SEKEY) -c $(ELFSIGN_SECERT) -e $@

# Rules (normally from make.rules) and macros which are used for post
# processing files. Normally, these do stripping of the comment section
# automatically.
#    RELEASE_CM:	Should be editted to reflect the release.
#    POST_PROCESS_O:	Post-processing for `.o' files.
#    POST_PROCESS_A:	Post-processing for `.a' files (currently null).
#    POST_PROCESS_SO:	Post-processing for `.so' files.
#    POST_PROCESS:	Post-processing for executable files (no suffix).
# Note that these macros are not completely generalized as they are to be
# used with the file name to be processed following.
#
# It is left as an exercise to Release Engineering to embellish the generation
# of the release comment string.
#
#	If this is a standard development build:
#		compress the comment section (mcs -c)
#		add the standard comment (mcs -a $(RELEASE_CM))
#		add the development specific comment (mcs -a $(DEV_CM))
#
#	If this is an installation build:
#		delete the comment section (mcs -d)
#		add the standard comment (mcs -a $(RELEASE_CM))
#		add the development specific comment (mcs -a $(DEV_CM))
#
#	If this is an release build:
#		delete the comment section (mcs -d)
#		add the standard comment (mcs -a $(RELEASE_CM))
#
#	The ONVERS macro sets the default value for the VERSION string
#	within pkginfo.
#
# The following list of macros are used in the definition of RELEASE_CM
# which is used to label all binaries in the build:
#
# 	RELEASE		Specific release of the build, eg: 5.2
#	VERSION		Version of the build (alpha, beta, Generic)
#	PATCHID		If this is a patch this value should contain
#			the patchid value (eg: "Generic 100832-01"), otherwise
#			it will be set to $(VERSION)
#	RELEASE_DATE	Date of the Release Build
#	PATCH_DATE	Date the patch was created, if this is blank it
#			will default to the RELEASE_DATE
#
ONVERS=		"11.11"
RELEASE=	5.11
VERSION=	SunOS Development
PATCHID=	$(VERSION)
RELEASE_DATE=	October 2007
PATCH_DATE=	$(RELEASE_DATE)
RELEASE_CM=	"@($(POUND_SIGN))SunOS $(RELEASE) $(PATCHID) $(PATCH_DATE)"
DEV_CM=		"@($(POUND_SIGN))SunOS Internal Development: \
`$(ECHO) $$LOGNAME` `date +%Y-%m-%d` `$(ECHO) [\`basename $$CODEMGR_WS\`]`"

PROCESS_COMMENT=		   @?${MCS} -c -a $(RELEASE_CM) -a $(DEV_CM)
$(STRIP_COMMENTS)PROCESS_COMMENT=  @?${MCS} -d -a $(RELEASE_CM) -a $(DEV_CM)
$(RELEASE_BUILD)PROCESS_COMMENT=   @?${MCS} -d -a $(RELEASE_CM)

STRIP_STABS=			   :
$(RELEASE_BUILD)STRIP_STABS=	   $(STRIP) -x $@

POST_PROCESS_O=		$(PROCESS_COMMENT) $@
POST_PROCESS_A=
POST_PROCESS_SO=	$(PROCESS_COMMENT) $@ ; $(STRIP_STABS) ; \
			$(ELFSIGN_OBJECT)
POST_PROCESS=		$(PROCESS_COMMENT) $@ ; $(STRIP_STABS) ; \
			$(ELFSIGN_OBJECT)

#
# The PKGDEFS macro points to the source directory containing the majority
# of ON's package definitions plus Makefiles with general package creation
# rules.
#
# PKGARCHIVE specifies the default location where packages should be
# placed if built.
#
PKGDEFS=$(SRC)/pkgdefs
$(RELEASE_BUILD)PKGARCHIVESUFFIX=	-nd
PKGARCHIVE=$(SRC)/../../packages/$(MACH)/nightly$(PKGARCHIVESUFFIX)

#	Default build rules which perform comment section post-processing.
#
.c:
	$(LINK.c) -o $@ $< $(LDLIBS)
	$(POST_PROCESS)
.c.o:
	$(COMPILE.c) $(OUTPUT_OPTION) $< $(CTFCONVERT_HOOK)
	$(POST_PROCESS_O)
.c.a:
	$(COMPILE.c) -o $% $<
	$(PROCESS_COMMENT) $%
	$(AR) $(ARFLAGS) $@ $%
	$(RM) $%
.s.o:
	$(COMPILE.s) -o $@ $<
	$(POST_PROCESS_O)
.s.a:
	$(COMPILE.s) -o $% $<
	$(PROCESS_COMMENT) $%
	$(AR) $(ARFLAGS) $@ $%
	$(RM) $%
.cc:
	$(LINK.cc) -o $@ $< $(LDLIBS)
	$(POST_PROCESS)
.cc.o:
	$(COMPILE.cc) $(OUTPUT_OPTION) $<
	$(POST_PROCESS_O)
.cc.a:
	$(COMPILE.cc) -o $% $<
	$(AR) $(ARFLAGS) $@ $%
	$(PROCESS_COMMENT) $%
	$(RM) $%
.y:
	$(YACC.y) $<
	$(LINK.c) -o $@ y.tab.c $(LDLIBS)
	$(POST_PROCESS)
	$(RM) y.tab.c
.y.o:
	$(YACC.y) $<
	$(COMPILE.c) -o $@ y.tab.c $(CTFCONVERT_HOOK)
	$(POST_PROCESS_O)
	$(RM) y.tab.c
.l:
	$(RM) $*.c
	$(LEX.l) $< > $*.c
	$(LINK.c) -o $@ $*.c -ll $(LDLIBS)
	$(POST_PROCESS)
	$(RM) $*.c
.l.o:
	$(RM) $*.c
	$(LEX.l) $< > $*.c
	$(COMPILE.c) -o $@ $*.c $(CTFCONVERT_HOOK)
	$(POST_PROCESS_O)
	$(RM) $*.c

.java.class:
	$(COMPILE.java) $<

#
# Rules to create message catalogue files from .sh, .c, .y, and .l files.
# For .sh files, we extract all gettext strings with sed(1) (being careful
# to permit multiple gettext strings on the same line), weed out the dups,
# and build the catalogue with awk(1).
#

.sh.po:
	$(SED) -n -e ":a" 					\
		  -e "h" 					\
		  -e "s/.*gettext *\(\"[^\"]*\"\).*/\1/p"	\
		  -e "x"					\
		  -e "s/\(.*\)gettext *\"[^\"]*\"\(.*\)/\1\2/"	\
		  -e "t a"					\
	       $< | sort -u | awk '{ print "msgid\t" $$0 "\nmsgstr" }' > $@

#
# When using xgettext, we want messages to go to the default domain,
# rather than the specified one.  This special version of the
# COMPILE.cpp macro effectively prevents expansion of TEXT_DOMAIN,
# causing xgettext to put all messages into the default domain.
#
CPPFORPO=$(COMPILE.cpp:\"$(TEXT_DOMAIN)\"=TEXT_DOMAIN)

.c.i:
	$(CPPFORPO) $< > $@

.h.i:
	$(CPPFORPO) $< > $@

.y.i:
	$(YACC) -d $<
	$(CPPFORPO) y.tab.c  > $@
	$(RM) y.tab.c 

.l.i:
	$(LEX) $<
	$(CPPFORPO) lex.yy.c  > $@
	$(RM) lex.yy.c

.c.po:
	$(CPPFORPO) $< > $<.i
	$(BUILD.po)

.y.po:
	$(YACC) -d $<
	$(CPPFORPO) y.tab.c  > $<.i
	$(BUILD.po)
	$(RM) y.tab.c 

.l.po:
	$(LEX) $<
	$(CPPFORPO) lex.yy.c  > $<.i
	$(BUILD.po)
	$(RM) lex.yy.c

#
# Rules to perform stylistic checks
#
.SUFFIXES: $(SUFFIXES) .x .xml .check .xmlchk

.h.check:
	$(DOT_H_CHECK)

.x.check:
	$(DOT_X_CHECK)

.xml.xmlchk:
	$(MANIFEST_CHECK)

#
# Rules to process ONC+ Source partial files
#
%_onc_plus:	%
	@$(ECHO) "extracting code from $< ... "
	sed -n -e '/ONC_PLUS EXTRACT START/,/ONC_PLUS EXTRACT END/p' $<  > $@