/****************************************************************************** * * Module Name: utosi - Support for the _OSI predefined control method * *****************************************************************************/ /* * Copyright (C) 2000 - 2016, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */ #include "acpi.h" #include "accommon.h" #define _COMPONENT ACPI_UTILITIES ACPI_MODULE_NAME ("utosi") /****************************************************************************** * * ACPICA policy for new _OSI strings: * * It is the stated policy of ACPICA that new _OSI strings will be integrated * into this module as soon as possible after they are defined. It is strongly * recommended that all ACPICA hosts mirror this policy and integrate any * changes to this module as soon as possible. There are several historical * reasons behind this policy: * * 1) New BIOSs tend to test only the case where the host responds TRUE to * the latest version of Windows, which would respond to the latest/newest * _OSI string. Not responding TRUE to the latest version of Windows will * risk executing untested code paths throughout the DSDT and SSDTs. * * 2) If a new _OSI string is recognized only after a significant delay, this * has the potential to cause problems on existing working machines because * of the possibility that a new and different path through the ASL code * will be executed. * * 3) New _OSI strings are tending to come out about once per year. A delay * in recognizing a new string for a significant amount of time risks the * release of another string which only compounds the initial problem. * *****************************************************************************/ /* * Strings supported by the _OSI predefined control method (which is * implemented internally within this module.) * * March 2009: Removed "Linux" as this host no longer wants to respond true * for this string. Basically, the only safe OS strings are windows-related * and in many or most cases represent the only test path within the * BIOS-provided ASL code. * * The last element of each entry is used to track the newest version of * Windows that the BIOS has requested. */ static ACPI_INTERFACE_INFO AcpiDefaultSupportedInterfaces[] = { /* Operating System Vendor Strings */ {"Windows 2000", NULL, 0, ACPI_OSI_WIN_2000}, /* Windows 2000 */ {"Windows 2001", NULL, 0, ACPI_OSI_WIN_XP}, /* Windows XP */ {"Windows 2001 SP1", NULL, 0, ACPI_OSI_WIN_XP_SP1}, /* Windows XP SP1 */ {"Windows 2001.1", NULL, 0, ACPI_OSI_WINSRV_2003}, /* Windows Server 2003 */ {"Windows 2001 SP2", NULL, 0, ACPI_OSI_WIN_XP_SP2}, /* Windows XP SP2 */ {"Windows 2001.1 SP1", NULL, 0, ACPI_OSI_WINSRV_2003_SP1}, /* Windows Server 2003 SP1 - Added 03/2006 */ {"Windows 2006", NULL, 0, ACPI_OSI_WIN_VISTA}, /* Windows Vista - Added 03/2006 */ {"Windows 2006.1", NULL, 0, ACPI_OSI_WINSRV_2008}, /* Windows Server 2008 - Added 09/2009 */ {"Windows 2006 SP1", NULL, 0, ACPI_OSI_WIN_VISTA_SP1}, /* Windows Vista SP1 - Added 09/2009 */ {"Windows 2006 SP2", NULL, 0, ACPI_OSI_WIN_VISTA_SP2}, /* Windows Vista SP2 - Added 09/2010 */ {"Windows 2009", NULL, 0, ACPI_OSI_WIN_7}, /* Windows 7 and Server 2008 R2 - Added 09/2009 */ /* * XXX * The following OSes are temporarily disabled. Windows introduced * support for xhci (USB 3.0) in Windows 8. When we advertise Windows 8 * and newer support, some vendors use that as a key to automatically * transition all USB ports to the xhci controller. Until we have * support for the xhci controller, we should not advertise these * operating systems. From a brief survey, there isn't too much other * AML that this impacts at this time. */ /* {"Windows 2012", NULL, 0, ACPI_OSI_WIN_8},*/ /* Windows 8 and Server 2012 - Added 08/2012 */ /* {"Windows 2013", NULL, 0, ACPI_OSI_WIN_8},*/ /* Windows 8.1 and Server 2012 R2 - Added 01/2014 */ /* {"Windows 2015", NULL, 0, ACPI_OSI_WIN_10},*/ /* Windows 10 - Added 03/2015 */ /* Feature Group Strings */ {"Extended Address Space Descriptor", NULL, ACPI_OSI_FEATURE, 0}, /* * All "optional" feature group strings (features that are implemented * by the host) should be dynamically modified to VALID by the host via * AcpiInstallInterface or AcpiUpdateInterfaces. Such optional feature * group strings are set as INVALID by default here. */ {"Module Device", NULL, ACPI_OSI_OPTIONAL_FEATURE, 0}, {"Processor Device", NULL, ACPI_OSI_OPTIONAL_FEATURE, 0}, {"3.0 Thermal Model", NULL, ACPI_OSI_OPTIONAL_FEATURE, 0}, {"3.0 _SCP Extensions", NULL, ACPI_OSI_OPTIONAL_FEATURE, 0}, {"Processor Aggregator Device", NULL, ACPI_OSI_OPTIONAL_FEATURE, 0} }; /******************************************************************************* * * FUNCTION: AcpiUtInitializeInterfaces * * PARAMETERS: None * * RETURN: Status * * DESCRIPTION: Initialize the global _OSI supported interfaces list * ******************************************************************************/ ACPI_STATUS AcpiUtInitializeInterfaces ( void) { ACPI_STATUS Status; UINT32 i; Status = AcpiOsAcquireMutex (AcpiGbl_OsiMutex, ACPI_WAIT_FOREVER); if (ACPI_FAILURE (Status)) { return (Status); } AcpiGbl_SupportedInterfaces = AcpiDefaultSupportedInterfaces; /* Link the static list of supported interfaces */ for (i = 0; i < (ACPI_ARRAY_LENGTH (AcpiDefaultSupportedInterfaces) - 1); i++) { AcpiDefaultSupportedInterfaces[i].Next = &AcpiDefaultSupportedInterfaces[(ACPI_SIZE) i + 1]; } AcpiOsReleaseMutex (AcpiGbl_OsiMutex); return (AE_OK); } /******************************************************************************* * * FUNCTION: AcpiUtInterfaceTerminate * * PARAMETERS: None * * RETURN: Status * * DESCRIPTION: Delete all interfaces in the global list. Sets * AcpiGbl_SupportedInterfaces to NULL. * ******************************************************************************/ ACPI_STATUS AcpiUtInterfaceTerminate ( void) { ACPI_STATUS Status; ACPI_INTERFACE_INFO *NextInterface; Status = AcpiOsAcquireMutex (AcpiGbl_OsiMutex, ACPI_WAIT_FOREVER); if (ACPI_FAILURE (Status)) { return (Status); } NextInterface = AcpiGbl_SupportedInterfaces; while (NextInterface) { AcpiGbl_SupportedInterfaces = NextInterface->Next; if (NextInterface->Flags & ACPI_OSI_DYNAMIC) { /* Only interfaces added at runtime can be freed */ ACPI_FREE (NextInterface->Name); ACPI_FREE (NextInterface); } else { /* Interface is in static list. Reset it to invalid or valid. */ if (NextInterface->Flags & ACPI_OSI_DEFAULT_INVALID) { NextInterface->Flags |= ACPI_OSI_INVALID; } else { NextInterface->Flags &= ~ACPI_OSI_INVALID; } } NextInterface = AcpiGbl_SupportedInterfaces; } AcpiOsReleaseMutex (AcpiGbl_OsiMutex); return (AE_OK); } /******************************************************************************* * * FUNCTION: AcpiUtInstallInterface * * PARAMETERS: InterfaceName - The interface to install * * RETURN: Status * * DESCRIPTION: Install the interface into the global interface list. * Caller MUST hold AcpiGbl_OsiMutex * ******************************************************************************/ ACPI_STATUS AcpiUtInstallInterface ( ACPI_STRING InterfaceName) { ACPI_INTERFACE_INFO *InterfaceInfo; /* Allocate info block and space for the name string */ InterfaceInfo = ACPI_ALLOCATE_ZEROED (sizeof (ACPI_INTERFACE_INFO)); if (!InterfaceInfo) { return (AE_NO_MEMORY); } InterfaceInfo->Name = ACPI_ALLOCATE_ZEROED (strlen (InterfaceName) + 1); if (!InterfaceInfo->Name) { ACPI_FREE (InterfaceInfo); return (AE_NO_MEMORY); } /* Initialize new info and insert at the head of the global list */ strcpy (InterfaceInfo->Name, InterfaceName); InterfaceInfo->Flags = ACPI_OSI_DYNAMIC; InterfaceInfo->Next = AcpiGbl_SupportedInterfaces; AcpiGbl_SupportedInterfaces = InterfaceInfo; return (AE_OK); } /******************************************************************************* * * FUNCTION: AcpiUtRemoveInterface * * PARAMETERS: InterfaceName - The interface to remove * * RETURN: Status * * DESCRIPTION: Remove the interface from the global interface list. * Caller MUST hold AcpiGbl_OsiMutex * ******************************************************************************/ ACPI_STATUS AcpiUtRemoveInterface ( ACPI_STRING InterfaceName) { ACPI_INTERFACE_INFO *PreviousInterface; ACPI_INTERFACE_INFO *NextInterface; PreviousInterface = NextInterface = AcpiGbl_SupportedInterfaces; while (NextInterface) { if (!strcmp (InterfaceName, NextInterface->Name)) { /* * Found: name is in either the static list * or was added at runtime */ if (NextInterface->Flags & ACPI_OSI_DYNAMIC) { /* Interface was added dynamically, remove and free it */ if (PreviousInterface == NextInterface) { AcpiGbl_SupportedInterfaces = NextInterface->Next; } else { PreviousInterface->Next = NextInterface->Next; } ACPI_FREE (NextInterface->Name); ACPI_FREE (NextInterface); } else { /* * Interface is in static list. If marked invalid, then * it does not actually exist. Else, mark it invalid. */ if (NextInterface->Flags & ACPI_OSI_INVALID) { return (AE_NOT_EXIST); } NextInterface->Flags |= ACPI_OSI_INVALID; } return (AE_OK); } PreviousInterface = NextInterface; NextInterface = NextInterface->Next; } /* Interface was not found */ return (AE_NOT_EXIST); } /******************************************************************************* * * FUNCTION: AcpiUtUpdateInterfaces * * PARAMETERS: Action - Actions to be performed during the * update * * RETURN: Status * * DESCRIPTION: Update _OSI interface strings, disabling or enabling OS vendor * strings or/and feature group strings. * Caller MUST hold AcpiGbl_OsiMutex * ******************************************************************************/ ACPI_STATUS AcpiUtUpdateInterfaces ( UINT8 Action) { ACPI_INTERFACE_INFO *NextInterface; NextInterface = AcpiGbl_SupportedInterfaces; while (NextInterface) { if (((NextInterface->Flags & ACPI_OSI_FEATURE) && (Action & ACPI_FEATURE_STRINGS)) || (!(NextInterface->Flags & ACPI_OSI_FEATURE) && (Action & ACPI_VENDOR_STRINGS))) { if (Action & ACPI_DISABLE_INTERFACES) { /* Mark the interfaces as invalid */ NextInterface->Flags |= ACPI_OSI_INVALID; } else { /* Mark the interfaces as valid */ NextInterface->Flags &= ~ACPI_OSI_INVALID; } } NextInterface = NextInterface->Next; } return (AE_OK); } /******************************************************************************* * * FUNCTION: AcpiUtGetInterface * * PARAMETERS: InterfaceName - The interface to find * * RETURN: ACPI_INTERFACE_INFO if found. NULL if not found. * * DESCRIPTION: Search for the specified interface name in the global list. * Caller MUST hold AcpiGbl_OsiMutex * ******************************************************************************/ ACPI_INTERFACE_INFO * AcpiUtGetInterface ( ACPI_STRING InterfaceName) { ACPI_INTERFACE_INFO *NextInterface; NextInterface = AcpiGbl_SupportedInterfaces; while (NextInterface) { if (!strcmp (InterfaceName, NextInterface->Name)) { return (NextInterface); } NextInterface = NextInterface->Next; } return (NULL); } /******************************************************************************* * * FUNCTION: AcpiUtOsiImplementation * * PARAMETERS: WalkState - Current walk state * * RETURN: Status * * DESCRIPTION: Implementation of the _OSI predefined control method. When * an invocation of _OSI is encountered in the system AML, * control is transferred to this function. * ******************************************************************************/ ACPI_STATUS AcpiUtOsiImplementation ( ACPI_WALK_STATE *WalkState) { ACPI_OPERAND_OBJECT *StringDesc; ACPI_OPERAND_OBJECT *ReturnDesc; ACPI_INTERFACE_INFO *InterfaceInfo; ACPI_INTERFACE_HANDLER InterfaceHandler; ACPI_STATUS Status; UINT32 ReturnValue; ACPI_FUNCTION_TRACE (UtOsiImplementation); /* Validate the string input argument (from the AML caller) */ StringDesc = WalkState->Arguments[0].Object; if (!StringDesc || (StringDesc->Common.Type != ACPI_TYPE_STRING)) { return_ACPI_STATUS (AE_TYPE); } /* Create a return object */ ReturnDesc = AcpiUtCreateInternalObject (ACPI_TYPE_INTEGER); if (!ReturnDesc) { return_ACPI_STATUS (AE_NO_MEMORY); } /* Default return value is 0, NOT SUPPORTED */ ReturnValue = 0; Status = AcpiOsAcquireMutex (AcpiGbl_OsiMutex, ACPI_WAIT_FOREVER); if (ACPI_FAILURE (Status)) { AcpiUtRemoveReference (ReturnDesc); return_ACPI_STATUS (Status); } /* Lookup the interface in the global _OSI list */ InterfaceInfo = AcpiUtGetInterface (StringDesc->String.Pointer); if (InterfaceInfo && !(InterfaceInfo->Flags & ACPI_OSI_INVALID)) { /* * The interface is supported. * Update the OsiData if necessary. We keep track of the latest * version of Windows that has been requested by the BIOS. */ if (InterfaceInfo->Value > AcpiGbl_OsiData) { AcpiGbl_OsiData = InterfaceInfo->Value; } ReturnValue = ACPI_UINT32_MAX; } AcpiOsReleaseMutex (AcpiGbl_OsiMutex); /* * Invoke an optional _OSI interface handler. The host OS may wish * to do some interface-specific handling. For example, warn about * certain interfaces or override the true/false support value. */ InterfaceHandler = AcpiGbl_InterfaceHandler; if (InterfaceHandler) { ReturnValue = InterfaceHandler ( StringDesc->String.Pointer, ReturnValue); } ACPI_DEBUG_PRINT_RAW ((ACPI_DB_INFO, "ACPI: BIOS _OSI(\"%s\") is %ssupported\n", StringDesc->String.Pointer, ReturnValue == 0 ? "not " : "")); /* Complete the return object */ ReturnDesc->Integer.Value = ReturnValue; WalkState->ReturnDesc = ReturnDesc; return_ACPI_STATUS (AE_OK); }