/****************************************************************************** * * Module Name: exoparg3 - AML execution - opcodes with 3 arguments * *****************************************************************************/ /* * Copyright (C) 2000 - 2016, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */ #include "acpi.h" #include "accommon.h" #include "acinterp.h" #include "acparser.h" #include "amlcode.h" #define _COMPONENT ACPI_EXECUTER ACPI_MODULE_NAME ("exoparg3") /*! * Naming convention for AML interpreter execution routines. * * The routines that begin execution of AML opcodes are named with a common * convention based upon the number of arguments, the number of target operands, * and whether or not a value is returned: * * AcpiExOpcode_xA_yT_zR * * Where: * * xA - ARGUMENTS: The number of arguments (input operands) that are * required for this opcode type (1 through 6 args). * yT - TARGETS: The number of targets (output operands) that are required * for this opcode type (0, 1, or 2 targets). * zR - RETURN VALUE: Indicates whether this opcode type returns a value * as the function return (0 or 1). * * The AcpiExOpcode* functions are called via the Dispatcher component with * fully resolved operands. !*/ /******************************************************************************* * * FUNCTION: AcpiExOpcode_3A_0T_0R * * PARAMETERS: WalkState - Current walk state * * RETURN: Status * * DESCRIPTION: Execute Triadic operator (3 operands) * ******************************************************************************/ ACPI_STATUS AcpiExOpcode_3A_0T_0R ( ACPI_WALK_STATE *WalkState) { ACPI_OPERAND_OBJECT **Operand = &WalkState->Operands[0]; ACPI_SIGNAL_FATAL_INFO *Fatal; ACPI_STATUS Status = AE_OK; ACPI_FUNCTION_TRACE_STR (ExOpcode_3A_0T_0R, AcpiPsGetOpcodeName (WalkState->Opcode)); switch (WalkState->Opcode) { case AML_FATAL_OP: /* Fatal (FatalType FatalCode FatalArg) */ ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "FatalOp: Type %X Code %X Arg %X " "<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<\n", (UINT32) Operand[0]->Integer.Value, (UINT32) Operand[1]->Integer.Value, (UINT32) Operand[2]->Integer.Value)); Fatal = ACPI_ALLOCATE (sizeof (ACPI_SIGNAL_FATAL_INFO)); if (Fatal) { Fatal->Type = (UINT32) Operand[0]->Integer.Value; Fatal->Code = (UINT32) Operand[1]->Integer.Value; Fatal->Argument = (UINT32) Operand[2]->Integer.Value; } /* Always signal the OS! */ Status = AcpiOsSignal (ACPI_SIGNAL_FATAL, Fatal); /* Might return while OS is shutting down, just continue */ ACPI_FREE (Fatal); goto Cleanup; case AML_EXTERNAL_OP: /* * If the interpreter sees this opcode, just ignore it. The External * op is intended for use by disassemblers in order to properly * disassemble control method invocations. The opcode or group of * opcodes should be surrounded by an "if (0)" clause to ensure that * AML interpreters never see the opcode. Thus, something is * wrong if an external opcode ever gets here. */ ACPI_ERROR ((AE_INFO, "Executed External Op")); Status = AE_OK; goto Cleanup; default: ACPI_ERROR ((AE_INFO, "Unknown AML opcode 0x%X", WalkState->Opcode)); Status = AE_AML_BAD_OPCODE; goto Cleanup; } Cleanup: return_ACPI_STATUS (Status); } /******************************************************************************* * * FUNCTION: AcpiExOpcode_3A_1T_1R * * PARAMETERS: WalkState - Current walk state * * RETURN: Status * * DESCRIPTION: Execute Triadic operator (3 operands) * ******************************************************************************/ ACPI_STATUS AcpiExOpcode_3A_1T_1R ( ACPI_WALK_STATE *WalkState) { ACPI_OPERAND_OBJECT **Operand = &WalkState->Operands[0]; ACPI_OPERAND_OBJECT *ReturnDesc = NULL; char *Buffer = NULL; ACPI_STATUS Status = AE_OK; UINT64 Index; ACPI_SIZE Length; ACPI_FUNCTION_TRACE_STR (ExOpcode_3A_1T_1R, AcpiPsGetOpcodeName (WalkState->Opcode)); switch (WalkState->Opcode) { case AML_MID_OP: /* Mid (Source[0], Index[1], Length[2], Result[3]) */ /* * Create the return object. The Source operand is guaranteed to be * either a String or a Buffer, so just use its type. */ ReturnDesc = AcpiUtCreateInternalObject ( (Operand[0])->Common.Type); if (!ReturnDesc) { Status = AE_NO_MEMORY; goto Cleanup; } /* Get the Integer values from the objects */ Index = Operand[1]->Integer.Value; Length = (ACPI_SIZE) Operand[2]->Integer.Value; /* * If the index is beyond the length of the String/Buffer, or if the * requested length is zero, return a zero-length String/Buffer */ if (Index >= Operand[0]->String.Length) { Length = 0; } /* Truncate request if larger than the actual String/Buffer */ else if ((Index + Length) > Operand[0]->String.Length) { Length = (ACPI_SIZE) Operand[0]->String.Length - (ACPI_SIZE) Index; } /* Strings always have a sub-pointer, not so for buffers */ switch ((Operand[0])->Common.Type) { case ACPI_TYPE_STRING: /* Always allocate a new buffer for the String */ Buffer = ACPI_ALLOCATE_ZEROED ((ACPI_SIZE) Length + 1); if (!Buffer) { Status = AE_NO_MEMORY; goto Cleanup; } break; case ACPI_TYPE_BUFFER: /* If the requested length is zero, don't allocate a buffer */ if (Length > 0) { /* Allocate a new buffer for the Buffer */ Buffer = ACPI_ALLOCATE_ZEROED (Length); if (!Buffer) { Status = AE_NO_MEMORY; goto Cleanup; } } break; default: /* Should not happen */ Status = AE_AML_OPERAND_TYPE; goto Cleanup; } if (Buffer) { /* We have a buffer, copy the portion requested */ memcpy (Buffer, Operand[0]->String.Pointer + Index, Length); } /* Set the length of the new String/Buffer */ ReturnDesc->String.Pointer = Buffer; ReturnDesc->String.Length = (UINT32) Length; /* Mark buffer initialized */ ReturnDesc->Buffer.Flags |= AOPOBJ_DATA_VALID; break; default: ACPI_ERROR ((AE_INFO, "Unknown AML opcode 0x%X", WalkState->Opcode)); Status = AE_AML_BAD_OPCODE; goto Cleanup; } /* Store the result in the target */ Status = AcpiExStore (ReturnDesc, Operand[3], WalkState); Cleanup: /* Delete return object on error */ if (ACPI_FAILURE (Status) || WalkState->ResultObj) { AcpiUtRemoveReference (ReturnDesc); WalkState->ResultObj = NULL; } else { /* Set the return object and exit */ WalkState->ResultObj = ReturnDesc; } return_ACPI_STATUS (Status); }