/****************************************************************************** * * Module Name: exoparg1 - AML execution - opcodes with 1 argument * *****************************************************************************/ /* * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */ #define __EXOPARG1_C__ #include "acpi.h" #include "accommon.h" #include "acparser.h" #include "acdispat.h" #include "acinterp.h" #include "amlcode.h" #include "acnamesp.h" #define _COMPONENT ACPI_EXECUTER ACPI_MODULE_NAME ("exoparg1") /*! * Naming convention for AML interpreter execution routines. * * The routines that begin execution of AML opcodes are named with a common * convention based upon the number of arguments, the number of target operands, * and whether or not a value is returned: * * AcpiExOpcode_xA_yT_zR * * Where: * * xA - ARGUMENTS: The number of arguments (input operands) that are * required for this opcode type (0 through 6 args). * yT - TARGETS: The number of targets (output operands) that are required * for this opcode type (0, 1, or 2 targets). * zR - RETURN VALUE: Indicates whether this opcode type returns a value * as the function return (0 or 1). * * The AcpiExOpcode* functions are called via the Dispatcher component with * fully resolved operands. !*/ /******************************************************************************* * * FUNCTION: AcpiExOpcode_0A_0T_1R * * PARAMETERS: WalkState - Current state (contains AML opcode) * * RETURN: Status * * DESCRIPTION: Execute operator with no operands, one return value * ******************************************************************************/ ACPI_STATUS AcpiExOpcode_0A_0T_1R ( ACPI_WALK_STATE *WalkState) { ACPI_STATUS Status = AE_OK; ACPI_OPERAND_OBJECT *ReturnDesc = NULL; ACPI_FUNCTION_TRACE_STR (ExOpcode_0A_0T_1R, AcpiPsGetOpcodeName (WalkState->Opcode)); /* Examine the AML opcode */ switch (WalkState->Opcode) { case AML_TIMER_OP: /* Timer () */ /* Create a return object of type Integer */ ReturnDesc = AcpiUtCreateIntegerObject (AcpiOsGetTimer ()); if (!ReturnDesc) { Status = AE_NO_MEMORY; goto Cleanup; } break; default: /* Unknown opcode */ ACPI_ERROR ((AE_INFO, "Unknown AML opcode 0x%X", WalkState->Opcode)); Status = AE_AML_BAD_OPCODE; break; } Cleanup: /* Delete return object on error */ if ((ACPI_FAILURE (Status)) || WalkState->ResultObj) { AcpiUtRemoveReference (ReturnDesc); WalkState->ResultObj = NULL; } else { /* Save the return value */ WalkState->ResultObj = ReturnDesc; } return_ACPI_STATUS (Status); } /******************************************************************************* * * FUNCTION: AcpiExOpcode_1A_0T_0R * * PARAMETERS: WalkState - Current state (contains AML opcode) * * RETURN: Status * * DESCRIPTION: Execute Type 1 monadic operator with numeric operand on * object stack * ******************************************************************************/ ACPI_STATUS AcpiExOpcode_1A_0T_0R ( ACPI_WALK_STATE *WalkState) { ACPI_OPERAND_OBJECT **Operand = &WalkState->Operands[0]; ACPI_STATUS Status = AE_OK; ACPI_FUNCTION_TRACE_STR (ExOpcode_1A_0T_0R, AcpiPsGetOpcodeName (WalkState->Opcode)); /* Examine the AML opcode */ switch (WalkState->Opcode) { case AML_RELEASE_OP: /* Release (MutexObject) */ Status = AcpiExReleaseMutex (Operand[0], WalkState); break; case AML_RESET_OP: /* Reset (EventObject) */ Status = AcpiExSystemResetEvent (Operand[0]); break; case AML_SIGNAL_OP: /* Signal (EventObject) */ Status = AcpiExSystemSignalEvent (Operand[0]); break; case AML_SLEEP_OP: /* Sleep (MsecTime) */ Status = AcpiExSystemDoSleep (Operand[0]->Integer.Value); break; case AML_STALL_OP: /* Stall (UsecTime) */ Status = AcpiExSystemDoStall ((UINT32) Operand[0]->Integer.Value); break; case AML_UNLOAD_OP: /* Unload (Handle) */ Status = AcpiExUnloadTable (Operand[0]); break; default: /* Unknown opcode */ ACPI_ERROR ((AE_INFO, "Unknown AML opcode 0x%X", WalkState->Opcode)); Status = AE_AML_BAD_OPCODE; break; } return_ACPI_STATUS (Status); } /******************************************************************************* * * FUNCTION: AcpiExOpcode_1A_1T_0R * * PARAMETERS: WalkState - Current state (contains AML opcode) * * RETURN: Status * * DESCRIPTION: Execute opcode with one argument, one target, and no * return value. * ******************************************************************************/ ACPI_STATUS AcpiExOpcode_1A_1T_0R ( ACPI_WALK_STATE *WalkState) { ACPI_STATUS Status = AE_OK; ACPI_OPERAND_OBJECT **Operand = &WalkState->Operands[0]; ACPI_FUNCTION_TRACE_STR (ExOpcode_1A_1T_0R, AcpiPsGetOpcodeName (WalkState->Opcode)); /* Examine the AML opcode */ switch (WalkState->Opcode) { case AML_LOAD_OP: Status = AcpiExLoadOp (Operand[0], Operand[1], WalkState); break; default: /* Unknown opcode */ ACPI_ERROR ((AE_INFO, "Unknown AML opcode 0x%X", WalkState->Opcode)); Status = AE_AML_BAD_OPCODE; goto Cleanup; } Cleanup: return_ACPI_STATUS (Status); } /******************************************************************************* * * FUNCTION: AcpiExOpcode_1A_1T_1R * * PARAMETERS: WalkState - Current state (contains AML opcode) * * RETURN: Status * * DESCRIPTION: Execute opcode with one argument, one target, and a * return value. * ******************************************************************************/ ACPI_STATUS AcpiExOpcode_1A_1T_1R ( ACPI_WALK_STATE *WalkState) { ACPI_STATUS Status = AE_OK; ACPI_OPERAND_OBJECT **Operand = &WalkState->Operands[0]; ACPI_OPERAND_OBJECT *ReturnDesc = NULL; ACPI_OPERAND_OBJECT *ReturnDesc2 = NULL; UINT32 Temp32; UINT32 i; UINT64 PowerOfTen; UINT64 Digit; ACPI_FUNCTION_TRACE_STR (ExOpcode_1A_1T_1R, AcpiPsGetOpcodeName (WalkState->Opcode)); /* Examine the AML opcode */ switch (WalkState->Opcode) { case AML_BIT_NOT_OP: case AML_FIND_SET_LEFT_BIT_OP: case AML_FIND_SET_RIGHT_BIT_OP: case AML_FROM_BCD_OP: case AML_TO_BCD_OP: case AML_COND_REF_OF_OP: /* Create a return object of type Integer for these opcodes */ ReturnDesc = AcpiUtCreateInternalObject (ACPI_TYPE_INTEGER); if (!ReturnDesc) { Status = AE_NO_MEMORY; goto Cleanup; } switch (WalkState->Opcode) { case AML_BIT_NOT_OP: /* Not (Operand, Result) */ ReturnDesc->Integer.Value = ~Operand[0]->Integer.Value; break; case AML_FIND_SET_LEFT_BIT_OP: /* FindSetLeftBit (Operand, Result) */ ReturnDesc->Integer.Value = Operand[0]->Integer.Value; /* * Acpi specification describes Integer type as a little * endian unsigned value, so this boundary condition is valid. */ for (Temp32 = 0; ReturnDesc->Integer.Value && Temp32 < ACPI_INTEGER_BIT_SIZE; ++Temp32) { ReturnDesc->Integer.Value >>= 1; } ReturnDesc->Integer.Value = Temp32; break; case AML_FIND_SET_RIGHT_BIT_OP: /* FindSetRightBit (Operand, Result) */ ReturnDesc->Integer.Value = Operand[0]->Integer.Value; /* * The Acpi specification describes Integer type as a little * endian unsigned value, so this boundary condition is valid. */ for (Temp32 = 0; ReturnDesc->Integer.Value && Temp32 < ACPI_INTEGER_BIT_SIZE; ++Temp32) { ReturnDesc->Integer.Value <<= 1; } /* Since the bit position is one-based, subtract from 33 (65) */ ReturnDesc->Integer.Value = Temp32 == 0 ? 0 : (ACPI_INTEGER_BIT_SIZE + 1) - Temp32; break; case AML_FROM_BCD_OP: /* FromBcd (BCDValue, Result) */ /* * The 64-bit ACPI integer can hold 16 4-bit BCD characters * (if table is 32-bit, integer can hold 8 BCD characters) * Convert each 4-bit BCD value */ PowerOfTen = 1; ReturnDesc->Integer.Value = 0; Digit = Operand[0]->Integer.Value; /* Convert each BCD digit (each is one nybble wide) */ for (i = 0; (i < AcpiGbl_IntegerNybbleWidth) && (Digit > 0); i++) { /* Get the least significant 4-bit BCD digit */ Temp32 = ((UINT32) Digit) & 0xF; /* Check the range of the digit */ if (Temp32 > 9) { ACPI_ERROR ((AE_INFO, "BCD digit too large (not decimal): 0x%X", Temp32)); Status = AE_AML_NUMERIC_OVERFLOW; goto Cleanup; } /* Sum the digit into the result with the current power of 10 */ ReturnDesc->Integer.Value += (((UINT64) Temp32) * PowerOfTen); /* Shift to next BCD digit */ Digit >>= 4; /* Next power of 10 */ PowerOfTen *= 10; } break; case AML_TO_BCD_OP: /* ToBcd (Operand, Result) */ ReturnDesc->Integer.Value = 0; Digit = Operand[0]->Integer.Value; /* Each BCD digit is one nybble wide */ for (i = 0; (i < AcpiGbl_IntegerNybbleWidth) && (Digit > 0); i++) { (void) AcpiUtShortDivide (Digit, 10, &Digit, &Temp32); /* * Insert the BCD digit that resides in the * remainder from above */ ReturnDesc->Integer.Value |= (((UINT64) Temp32) << ACPI_MUL_4 (i)); } /* Overflow if there is any data left in Digit */ if (Digit > 0) { ACPI_ERROR ((AE_INFO, "Integer too large to convert to BCD: 0x%8.8X%8.8X", ACPI_FORMAT_UINT64 (Operand[0]->Integer.Value))); Status = AE_AML_NUMERIC_OVERFLOW; goto Cleanup; } break; case AML_COND_REF_OF_OP: /* CondRefOf (SourceObject, Result) */ /* * This op is a little strange because the internal return value is * different than the return value stored in the result descriptor * (There are really two return values) */ if ((ACPI_NAMESPACE_NODE *) Operand[0] == AcpiGbl_RootNode) { /* * This means that the object does not exist in the namespace, * return FALSE */ ReturnDesc->Integer.Value = 0; goto Cleanup; } /* Get the object reference, store it, and remove our reference */ Status = AcpiExGetObjectReference (Operand[0], &ReturnDesc2, WalkState); if (ACPI_FAILURE (Status)) { goto Cleanup; } Status = AcpiExStore (ReturnDesc2, Operand[1], WalkState); AcpiUtRemoveReference (ReturnDesc2); /* The object exists in the namespace, return TRUE */ ReturnDesc->Integer.Value = ACPI_UINT64_MAX; goto Cleanup; default: /* No other opcodes get here */ break; } break; case AML_STORE_OP: /* Store (Source, Target) */ /* * A store operand is typically a number, string, buffer or lvalue * Be careful about deleting the source object, * since the object itself may have been stored. */ Status = AcpiExStore (Operand[0], Operand[1], WalkState); if (ACPI_FAILURE (Status)) { return_ACPI_STATUS (Status); } /* It is possible that the Store already produced a return object */ if (!WalkState->ResultObj) { /* * Normally, we would remove a reference on the Operand[0] * parameter; But since it is being used as the internal return * object (meaning we would normally increment it), the two * cancel out, and we simply don't do anything. */ WalkState->ResultObj = Operand[0]; WalkState->Operands[0] = NULL; /* Prevent deletion */ } return_ACPI_STATUS (Status); /* * ACPI 2.0 Opcodes */ case AML_COPY_OP: /* Copy (Source, Target) */ Status = AcpiUtCopyIobjectToIobject (Operand[0], &ReturnDesc, WalkState); break; case AML_TO_DECSTRING_OP: /* ToDecimalString (Data, Result) */ Status = AcpiExConvertToString (Operand[0], &ReturnDesc, ACPI_EXPLICIT_CONVERT_DECIMAL); if (ReturnDesc == Operand[0]) { /* No conversion performed, add ref to handle return value */ AcpiUtAddReference (ReturnDesc); } break; case AML_TO_HEXSTRING_OP: /* ToHexString (Data, Result) */ Status = AcpiExConvertToString (Operand[0], &ReturnDesc, ACPI_EXPLICIT_CONVERT_HEX); if (ReturnDesc == Operand[0]) { /* No conversion performed, add ref to handle return value */ AcpiUtAddReference (ReturnDesc); } break; case AML_TO_BUFFER_OP: /* ToBuffer (Data, Result) */ Status = AcpiExConvertToBuffer (Operand[0], &ReturnDesc); if (ReturnDesc == Operand[0]) { /* No conversion performed, add ref to handle return value */ AcpiUtAddReference (ReturnDesc); } break; case AML_TO_INTEGER_OP: /* ToInteger (Data, Result) */ Status = AcpiExConvertToInteger (Operand[0], &ReturnDesc, ACPI_ANY_BASE); if (ReturnDesc == Operand[0]) { /* No conversion performed, add ref to handle return value */ AcpiUtAddReference (ReturnDesc); } break; case AML_SHIFT_LEFT_BIT_OP: /* ShiftLeftBit (Source, BitNum) */ case AML_SHIFT_RIGHT_BIT_OP: /* ShiftRightBit (Source, BitNum) */ /* These are two obsolete opcodes */ ACPI_ERROR ((AE_INFO, "%s is obsolete and not implemented", AcpiPsGetOpcodeName (WalkState->Opcode))); Status = AE_SUPPORT; goto Cleanup; default: /* Unknown opcode */ ACPI_ERROR ((AE_INFO, "Unknown AML opcode 0x%X", WalkState->Opcode)); Status = AE_AML_BAD_OPCODE; goto Cleanup; } if (ACPI_SUCCESS (Status)) { /* Store the return value computed above into the target object */ Status = AcpiExStore (ReturnDesc, Operand[1], WalkState); } Cleanup: /* Delete return object on error */ if (ACPI_FAILURE (Status)) { AcpiUtRemoveReference (ReturnDesc); } /* Save return object on success */ else if (!WalkState->ResultObj) { WalkState->ResultObj = ReturnDesc; } return_ACPI_STATUS (Status); } /******************************************************************************* * * FUNCTION: AcpiExOpcode_1A_0T_1R * * PARAMETERS: WalkState - Current state (contains AML opcode) * * RETURN: Status * * DESCRIPTION: Execute opcode with one argument, no target, and a return value * ******************************************************************************/ ACPI_STATUS AcpiExOpcode_1A_0T_1R ( ACPI_WALK_STATE *WalkState) { ACPI_OPERAND_OBJECT **Operand = &WalkState->Operands[0]; ACPI_OPERAND_OBJECT *TempDesc; ACPI_OPERAND_OBJECT *ReturnDesc = NULL; ACPI_STATUS Status = AE_OK; UINT32 Type; UINT64 Value; ACPI_FUNCTION_TRACE_STR (ExOpcode_1A_0T_1R, AcpiPsGetOpcodeName (WalkState->Opcode)); /* Examine the AML opcode */ switch (WalkState->Opcode) { case AML_LNOT_OP: /* LNot (Operand) */ ReturnDesc = AcpiUtCreateIntegerObject ((UINT64) 0); if (!ReturnDesc) { Status = AE_NO_MEMORY; goto Cleanup; } /* * Set result to ONES (TRUE) if Value == 0. Note: * ReturnDesc->Integer.Value is initially == 0 (FALSE) from above. */ if (!Operand[0]->Integer.Value) { ReturnDesc->Integer.Value = ACPI_UINT64_MAX; } break; case AML_DECREMENT_OP: /* Decrement (Operand) */ case AML_INCREMENT_OP: /* Increment (Operand) */ /* * Create a new integer. Can't just get the base integer and * increment it because it may be an Arg or Field. */ ReturnDesc = AcpiUtCreateInternalObject (ACPI_TYPE_INTEGER); if (!ReturnDesc) { Status = AE_NO_MEMORY; goto Cleanup; } /* * Since we are expecting a Reference operand, it can be either a * NS Node or an internal object. */ TempDesc = Operand[0]; if (ACPI_GET_DESCRIPTOR_TYPE (TempDesc) == ACPI_DESC_TYPE_OPERAND) { /* Internal reference object - prevent deletion */ AcpiUtAddReference (TempDesc); } /* * Convert the Reference operand to an Integer (This removes a * reference on the Operand[0] object) * * NOTE: We use LNOT_OP here in order to force resolution of the * reference operand to an actual integer. */ Status = AcpiExResolveOperands (AML_LNOT_OP, &TempDesc, WalkState); if (ACPI_FAILURE (Status)) { ACPI_EXCEPTION ((AE_INFO, Status, "While resolving operands for [%s]", AcpiPsGetOpcodeName (WalkState->Opcode))); goto Cleanup; } /* * TempDesc is now guaranteed to be an Integer object -- * Perform the actual increment or decrement */ if (WalkState->Opcode == AML_INCREMENT_OP) { ReturnDesc->Integer.Value = TempDesc->Integer.Value +1; } else { ReturnDesc->Integer.Value = TempDesc->Integer.Value -1; } /* Finished with this Integer object */ AcpiUtRemoveReference (TempDesc); /* * Store the result back (indirectly) through the original * Reference object */ Status = AcpiExStore (ReturnDesc, Operand[0], WalkState); break; case AML_TYPE_OP: /* ObjectType (SourceObject) */ /* * Note: The operand is not resolved at this point because we want to * get the associated object, not its value. For example, we don't * want to resolve a FieldUnit to its value, we want the actual * FieldUnit object. */ /* Get the type of the base object */ Status = AcpiExResolveMultiple (WalkState, Operand[0], &Type, NULL); if (ACPI_FAILURE (Status)) { goto Cleanup; } /* Allocate a descriptor to hold the type. */ ReturnDesc = AcpiUtCreateIntegerObject ((UINT64) Type); if (!ReturnDesc) { Status = AE_NO_MEMORY; goto Cleanup; } break; case AML_SIZE_OF_OP: /* SizeOf (SourceObject) */ /* * Note: The operand is not resolved at this point because we want to * get the associated object, not its value. */ /* Get the base object */ Status = AcpiExResolveMultiple (WalkState, Operand[0], &Type, &TempDesc); if (ACPI_FAILURE (Status)) { goto Cleanup; } /* * The type of the base object must be integer, buffer, string, or * package. All others are not supported. * * NOTE: Integer is not specifically supported by the ACPI spec, * but is supported implicitly via implicit operand conversion. * rather than bother with conversion, we just use the byte width * global (4 or 8 bytes). */ switch (Type) { case ACPI_TYPE_INTEGER: Value = AcpiGbl_IntegerByteWidth; break; case ACPI_TYPE_STRING: Value = TempDesc->String.Length; break; case ACPI_TYPE_BUFFER: /* Buffer arguments may not be evaluated at this point */ Status = AcpiDsGetBufferArguments (TempDesc); Value = TempDesc->Buffer.Length; break; case ACPI_TYPE_PACKAGE: /* Package arguments may not be evaluated at this point */ Status = AcpiDsGetPackageArguments (TempDesc); Value = TempDesc->Package.Count; break; default: ACPI_ERROR ((AE_INFO, "Operand must be Buffer/Integer/String/Package - found type %s", AcpiUtGetTypeName (Type))); Status = AE_AML_OPERAND_TYPE; goto Cleanup; } if (ACPI_FAILURE (Status)) { goto Cleanup; } /* * Now that we have the size of the object, create a result * object to hold the value */ ReturnDesc = AcpiUtCreateIntegerObject (Value); if (!ReturnDesc) { Status = AE_NO_MEMORY; goto Cleanup; } break; case AML_REF_OF_OP: /* RefOf (SourceObject) */ Status = AcpiExGetObjectReference (Operand[0], &ReturnDesc, WalkState); if (ACPI_FAILURE (Status)) { goto Cleanup; } break; case AML_DEREF_OF_OP: /* DerefOf (ObjReference | String) */ /* Check for a method local or argument, or standalone String */ if (ACPI_GET_DESCRIPTOR_TYPE (Operand[0]) == ACPI_DESC_TYPE_NAMED) { TempDesc = AcpiNsGetAttachedObject ( (ACPI_NAMESPACE_NODE *) Operand[0]); if (TempDesc && ((TempDesc->Common.Type == ACPI_TYPE_STRING) || (TempDesc->Common.Type == ACPI_TYPE_LOCAL_REFERENCE))) { Operand[0] = TempDesc; AcpiUtAddReference (TempDesc); } else { Status = AE_AML_OPERAND_TYPE; goto Cleanup; } } else { switch ((Operand[0])->Common.Type) { case ACPI_TYPE_LOCAL_REFERENCE: /* * This is a DerefOf (LocalX | ArgX) * * Must resolve/dereference the local/arg reference first */ switch (Operand[0]->Reference.Class) { case ACPI_REFCLASS_LOCAL: case ACPI_REFCLASS_ARG: /* Set Operand[0] to the value of the local/arg */ Status = AcpiDsMethodDataGetValue ( Operand[0]->Reference.Class, Operand[0]->Reference.Value, WalkState, &TempDesc); if (ACPI_FAILURE (Status)) { goto Cleanup; } /* * Delete our reference to the input object and * point to the object just retrieved */ AcpiUtRemoveReference (Operand[0]); Operand[0] = TempDesc; break; case ACPI_REFCLASS_REFOF: /* Get the object to which the reference refers */ TempDesc = Operand[0]->Reference.Object; AcpiUtRemoveReference (Operand[0]); Operand[0] = TempDesc; break; default: /* Must be an Index op - handled below */ break; } break; case ACPI_TYPE_STRING: break; default: Status = AE_AML_OPERAND_TYPE; goto Cleanup; } } if (ACPI_GET_DESCRIPTOR_TYPE (Operand[0]) != ACPI_DESC_TYPE_NAMED) { if ((Operand[0])->Common.Type == ACPI_TYPE_STRING) { /* * This is a DerefOf (String). The string is a reference * to a named ACPI object. * * 1) Find the owning Node * 2) Dereference the node to an actual object. Could be a * Field, so we need to resolve the node to a value. */ Status = AcpiNsGetNode (WalkState->ScopeInfo->Scope.Node, Operand[0]->String.Pointer, ACPI_NS_SEARCH_PARENT, ACPI_CAST_INDIRECT_PTR ( ACPI_NAMESPACE_NODE, &ReturnDesc)); if (ACPI_FAILURE (Status)) { goto Cleanup; } Status = AcpiExResolveNodeToValue ( ACPI_CAST_INDIRECT_PTR ( ACPI_NAMESPACE_NODE, &ReturnDesc), WalkState); goto Cleanup; } } /* Operand[0] may have changed from the code above */ if (ACPI_GET_DESCRIPTOR_TYPE (Operand[0]) == ACPI_DESC_TYPE_NAMED) { /* * This is a DerefOf (ObjectReference) * Get the actual object from the Node (This is the dereference). * This case may only happen when a LocalX or ArgX is * dereferenced above. */ ReturnDesc = AcpiNsGetAttachedObject ( (ACPI_NAMESPACE_NODE *) Operand[0]); AcpiUtAddReference (ReturnDesc); } else { /* * This must be a reference object produced by either the * Index() or RefOf() operator */ switch (Operand[0]->Reference.Class) { case ACPI_REFCLASS_INDEX: /* * The target type for the Index operator must be * either a Buffer or a Package */ switch (Operand[0]->Reference.TargetType) { case ACPI_TYPE_BUFFER_FIELD: TempDesc = Operand[0]->Reference.Object; /* * Create a new object that contains one element of the * buffer -- the element pointed to by the index. * * NOTE: index into a buffer is NOT a pointer to a * sub-buffer of the main buffer, it is only a pointer to a * single element (byte) of the buffer! * * Since we are returning the value of the buffer at the * indexed location, we don't need to add an additional * reference to the buffer itself. */ ReturnDesc = AcpiUtCreateIntegerObject ((UINT64) TempDesc->Buffer.Pointer[Operand[0]->Reference.Value]); if (!ReturnDesc) { Status = AE_NO_MEMORY; goto Cleanup; } break; case ACPI_TYPE_PACKAGE: /* * Return the referenced element of the package. We must * add another reference to the referenced object, however. */ ReturnDesc = *(Operand[0]->Reference.Where); if (ReturnDesc) { AcpiUtAddReference (ReturnDesc); } break; default: ACPI_ERROR ((AE_INFO, "Unknown Index TargetType 0x%X in reference object %p", Operand[0]->Reference.TargetType, Operand[0])); Status = AE_AML_OPERAND_TYPE; goto Cleanup; } break; case ACPI_REFCLASS_REFOF: ReturnDesc = Operand[0]->Reference.Object; if (ACPI_GET_DESCRIPTOR_TYPE (ReturnDesc) == ACPI_DESC_TYPE_NAMED) { ReturnDesc = AcpiNsGetAttachedObject ( (ACPI_NAMESPACE_NODE *) ReturnDesc); } /* Add another reference to the object! */ AcpiUtAddReference (ReturnDesc); break; default: ACPI_ERROR ((AE_INFO, "Unknown class in reference(%p) - 0x%2.2X", Operand[0], Operand[0]->Reference.Class)); Status = AE_TYPE; goto Cleanup; } } break; default: ACPI_ERROR ((AE_INFO, "Unknown AML opcode 0x%X", WalkState->Opcode)); Status = AE_AML_BAD_OPCODE; goto Cleanup; } Cleanup: /* Delete return object on error */ if (ACPI_FAILURE (Status)) { AcpiUtRemoveReference (ReturnDesc); } /* Save return object on success */ else { WalkState->ResultObj = ReturnDesc; } return_ACPI_STATUS (Status); }