/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2008 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if defined(__xpv) #include #endif #include struct cpu cpus[1]; /* CPU data */ struct cpu *cpu[NCPU] = {&cpus[0]}; /* pointers to all CPUs */ cpu_core_t cpu_core[NCPU]; /* cpu_core structures */ /* * Useful for disabling MP bring-up on a MP capable system. */ int use_mp = 1; /* * to be set by a PSM to indicate what cpus * are sitting around on the system. */ cpuset_t mp_cpus; /* * This variable is used by the hat layer to decide whether or not * critical sections are needed to prevent race conditions. For sun4m, * this variable is set once enough MP initialization has been done in * order to allow cross calls. */ int flushes_require_xcalls; cpuset_t cpu_ready_set; /* initialized in startup() */ static void mp_startup(void); static void cpu_sep_enable(void); static void cpu_sep_disable(void); static void cpu_asysc_enable(void); static void cpu_asysc_disable(void); /* * Init CPU info - get CPU type info for processor_info system call. */ void init_cpu_info(struct cpu *cp) { processor_info_t *pi = &cp->cpu_type_info; char buf[CPU_IDSTRLEN]; /* * Get clock-frequency property for the CPU. */ pi->pi_clock = cpu_freq; /* * Current frequency in Hz. */ cp->cpu_curr_clock = cpu_freq_hz; /* * Supported frequencies. */ cpu_set_supp_freqs(cp, NULL); (void) strcpy(pi->pi_processor_type, "i386"); if (fpu_exists) (void) strcpy(pi->pi_fputypes, "i387 compatible"); (void) cpuid_getidstr(cp, buf, sizeof (buf)); cp->cpu_idstr = kmem_alloc(strlen(buf) + 1, KM_SLEEP); (void) strcpy(cp->cpu_idstr, buf); cmn_err(CE_CONT, "?cpu%d: %s\n", cp->cpu_id, cp->cpu_idstr); (void) cpuid_getbrandstr(cp, buf, sizeof (buf)); cp->cpu_brandstr = kmem_alloc(strlen(buf) + 1, KM_SLEEP); (void) strcpy(cp->cpu_brandstr, buf); cmn_err(CE_CONT, "?cpu%d: %s\n", cp->cpu_id, cp->cpu_brandstr); } /* * Configure syscall support on this CPU. */ /*ARGSUSED*/ void init_cpu_syscall(struct cpu *cp) { kpreempt_disable(); #if defined(__amd64) if ((x86_feature & (X86_MSR | X86_ASYSC)) == (X86_MSR | X86_ASYSC)) { #if !defined(__lint) /* * The syscall instruction imposes a certain ordering on * segment selectors, so we double-check that ordering * here. */ ASSERT(KDS_SEL == KCS_SEL + 8); ASSERT(UDS_SEL == U32CS_SEL + 8); ASSERT(UCS_SEL == U32CS_SEL + 16); #endif /* * Turn syscall/sysret extensions on. */ cpu_asysc_enable(); /* * Program the magic registers .. */ wrmsr(MSR_AMD_STAR, ((uint64_t)(U32CS_SEL << 16 | KCS_SEL)) << 32); wrmsr(MSR_AMD_LSTAR, (uint64_t)(uintptr_t)sys_syscall); wrmsr(MSR_AMD_CSTAR, (uint64_t)(uintptr_t)sys_syscall32); /* * This list of flags is masked off the incoming * %rfl when we enter the kernel. */ wrmsr(MSR_AMD_SFMASK, (uint64_t)(uintptr_t)(PS_IE | PS_T)); } #endif /* * On 32-bit kernels, we use sysenter/sysexit because it's too * hard to use syscall/sysret, and it is more portable anyway. * * On 64-bit kernels on Nocona machines, the 32-bit syscall * variant isn't available to 32-bit applications, but sysenter is. */ if ((x86_feature & (X86_MSR | X86_SEP)) == (X86_MSR | X86_SEP)) { #if !defined(__lint) /* * The sysenter instruction imposes a certain ordering on * segment selectors, so we double-check that ordering * here. See "sysenter" in Intel document 245471-012, "IA-32 * Intel Architecture Software Developer's Manual Volume 2: * Instruction Set Reference" */ ASSERT(KDS_SEL == KCS_SEL + 8); ASSERT32(UCS_SEL == ((KCS_SEL + 16) | 3)); ASSERT32(UDS_SEL == UCS_SEL + 8); ASSERT64(U32CS_SEL == ((KCS_SEL + 16) | 3)); ASSERT64(UDS_SEL == U32CS_SEL + 8); #endif cpu_sep_enable(); /* * resume() sets this value to the base of the threads stack * via a context handler. */ wrmsr(MSR_INTC_SEP_ESP, 0); wrmsr(MSR_INTC_SEP_EIP, (uint64_t)(uintptr_t)sys_sysenter); } kpreempt_enable(); } /* * Multiprocessor initialization. * * Allocate and initialize the cpu structure, TRAPTRACE buffer, and the * startup and idle threads for the specified CPU. */ struct cpu * mp_startup_init(int cpun) { struct cpu *cp; kthread_id_t tp; caddr_t sp; proc_t *procp; #if !defined(__xpv) extern int idle_cpu_prefer_mwait; #endif extern void idle(); #ifdef TRAPTRACE trap_trace_ctl_t *ttc = &trap_trace_ctl[cpun]; #endif ASSERT(cpun < NCPU && cpu[cpun] == NULL); cp = kmem_zalloc(sizeof (*cp), KM_SLEEP); #if !defined(__xpv) if ((x86_feature & X86_MWAIT) && idle_cpu_prefer_mwait) cp->cpu_m.mcpu_mwait = cpuid_mwait_alloc(CPU); #endif procp = curthread->t_procp; mutex_enter(&cpu_lock); /* * Initialize the dispatcher first. */ disp_cpu_init(cp); mutex_exit(&cpu_lock); cpu_vm_data_init(cp); /* * Allocate and initialize the startup thread for this CPU. * Interrupt and process switch stacks get allocated later * when the CPU starts running. */ tp = thread_create(NULL, 0, NULL, NULL, 0, procp, TS_STOPPED, maxclsyspri); /* * Set state to TS_ONPROC since this thread will start running * as soon as the CPU comes online. * * All the other fields of the thread structure are setup by * thread_create(). */ THREAD_ONPROC(tp, cp); tp->t_preempt = 1; tp->t_bound_cpu = cp; tp->t_affinitycnt = 1; tp->t_cpu = cp; tp->t_disp_queue = cp->cpu_disp; /* * Setup thread to start in mp_startup. */ sp = tp->t_stk; tp->t_pc = (uintptr_t)mp_startup; tp->t_sp = (uintptr_t)(sp - MINFRAME); #if defined(__amd64) tp->t_sp -= STACK_ENTRY_ALIGN; /* fake a call */ #endif cp->cpu_id = cpun; cp->cpu_self = cp; cp->cpu_thread = tp; cp->cpu_lwp = NULL; cp->cpu_dispthread = tp; cp->cpu_dispatch_pri = DISP_PRIO(tp); /* * cpu_base_spl must be set explicitly here to prevent any blocking * operations in mp_startup from causing the spl of the cpu to drop * to 0 (allowing device interrupts before we're ready) in resume(). * cpu_base_spl MUST remain at LOCK_LEVEL until the cpu is CPU_READY. * As an extra bit of security on DEBUG kernels, this is enforced with * an assertion in mp_startup() -- before cpu_base_spl is set to its * proper value. */ cp->cpu_base_spl = ipltospl(LOCK_LEVEL); /* * Now, initialize per-CPU idle thread for this CPU. */ tp = thread_create(NULL, PAGESIZE, idle, NULL, 0, procp, TS_ONPROC, -1); cp->cpu_idle_thread = tp; tp->t_preempt = 1; tp->t_bound_cpu = cp; tp->t_affinitycnt = 1; tp->t_cpu = cp; tp->t_disp_queue = cp->cpu_disp; /* * Bootstrap the CPU's PG data */ pg_cpu_bootstrap(cp); /* * Perform CPC initialization on the new CPU. */ kcpc_hw_init(cp); /* * Allocate virtual addresses for cpu_caddr1 and cpu_caddr2 * for each CPU. */ setup_vaddr_for_ppcopy(cp); /* * Allocate page for new GDT and initialize from current GDT. */ #if !defined(__lint) ASSERT((sizeof (*cp->cpu_gdt) * NGDT) <= PAGESIZE); #endif cp->cpu_gdt = kmem_zalloc(PAGESIZE, KM_SLEEP); bcopy(CPU->cpu_gdt, cp->cpu_gdt, (sizeof (*cp->cpu_gdt) * NGDT)); #if defined(__i386) /* * setup kernel %gs. */ set_usegd(&cp->cpu_gdt[GDT_GS], cp, sizeof (struct cpu) -1, SDT_MEMRWA, SEL_KPL, 0, 1); #endif /* * If we have more than one node, each cpu gets a copy of IDT * local to its node. If this is a Pentium box, we use cpu 0's * IDT. cpu 0's IDT has been made read-only to workaround the * cmpxchgl register bug */ if (system_hardware.hd_nodes && x86_type != X86_TYPE_P5) { #if !defined(__lint) ASSERT((sizeof (*CPU->cpu_idt) * NIDT) <= PAGESIZE); #endif cp->cpu_idt = kmem_zalloc(PAGESIZE, KM_SLEEP); bcopy(CPU->cpu_idt, cp->cpu_idt, PAGESIZE); } else { cp->cpu_idt = CPU->cpu_idt; } /* * Get interrupt priority data from cpu 0. */ cp->cpu_pri_data = CPU->cpu_pri_data; /* * alloc space for cpuid info */ cpuid_alloc_space(cp); #if !defined(__xpv) /* * alloc space for ucode_info */ ucode_alloc_space(cp); #endif hat_cpu_online(cp); #ifdef TRAPTRACE /* * If this is a TRAPTRACE kernel, allocate TRAPTRACE buffers */ ttc->ttc_first = (uintptr_t)kmem_zalloc(trap_trace_bufsize, KM_SLEEP); ttc->ttc_next = ttc->ttc_first; ttc->ttc_limit = ttc->ttc_first + trap_trace_bufsize; #endif /* * Record that we have another CPU. */ mutex_enter(&cpu_lock); /* * Initialize the interrupt threads for this CPU */ cpu_intr_alloc(cp, NINTR_THREADS); /* * Add CPU to list of available CPUs. It'll be on the active list * after mp_startup(). */ cpu_add_unit(cp); mutex_exit(&cpu_lock); return (cp); } /* * Undo what was done in mp_startup_init */ static void mp_startup_fini(struct cpu *cp, int error) { mutex_enter(&cpu_lock); /* * Remove the CPU from the list of available CPUs. */ cpu_del_unit(cp->cpu_id); if (error == ETIMEDOUT) { /* * The cpu was started, but never *seemed* to run any * code in the kernel; it's probably off spinning in its * own private world, though with potential references to * our kmem-allocated IDTs and GDTs (for example). * * Worse still, it may actually wake up some time later, * so rather than guess what it might or might not do, we * leave the fundamental data structures intact. */ cp->cpu_flags = 0; mutex_exit(&cpu_lock); return; } /* * At this point, the only threads bound to this CPU should * special per-cpu threads: it's idle thread, it's pause threads, * and it's interrupt threads. Clean these up. */ cpu_destroy_bound_threads(cp); cp->cpu_idle_thread = NULL; /* * Free the interrupt stack. */ segkp_release(segkp, cp->cpu_intr_stack - (INTR_STACK_SIZE - SA(MINFRAME))); mutex_exit(&cpu_lock); #ifdef TRAPTRACE /* * Discard the trap trace buffer */ { trap_trace_ctl_t *ttc = &trap_trace_ctl[cp->cpu_id]; kmem_free((void *)ttc->ttc_first, trap_trace_bufsize); ttc->ttc_first = NULL; } #endif hat_cpu_offline(cp); cpuid_free_space(cp); #if !defined(__xpv) ucode_free_space(cp); #endif if (cp->cpu_idt != CPU->cpu_idt) kmem_free(cp->cpu_idt, PAGESIZE); cp->cpu_idt = NULL; kmem_free(cp->cpu_gdt, PAGESIZE); cp->cpu_gdt = NULL; teardown_vaddr_for_ppcopy(cp); kcpc_hw_fini(cp); cp->cpu_dispthread = NULL; cp->cpu_thread = NULL; /* discarded by cpu_destroy_bound_threads() */ cpu_vm_data_destroy(cp); mutex_enter(&cpu_lock); disp_cpu_fini(cp); mutex_exit(&cpu_lock); #if !defined(__xpv) if (cp->cpu_m.mcpu_mwait != NULL) cpuid_mwait_free(cp); #endif kmem_free(cp, sizeof (*cp)); } /* * Apply workarounds for known errata, and warn about those that are absent. * * System vendors occasionally create configurations which contain different * revisions of the CPUs that are almost but not exactly the same. At the * time of writing, this meant that their clock rates were the same, their * feature sets were the same, but the required workaround were -not- * necessarily the same. So, this routine is invoked on -every- CPU soon * after starting to make sure that the resulting system contains the most * pessimal set of workarounds needed to cope with *any* of the CPUs in the * system. * * workaround_errata is invoked early in mlsetup() for CPU 0, and in * mp_startup() for all slave CPUs. Slaves process workaround_errata prior * to acknowledging their readiness to the master, so this routine will * never be executed by multiple CPUs in parallel, thus making updates to * global data safe. * * These workarounds are based on Rev 3.57 of the Revision Guide for * AMD Athlon(tm) 64 and AMD Opteron(tm) Processors, August 2005. */ #if defined(OPTERON_ERRATUM_88) int opteron_erratum_88; /* if non-zero -> at least one cpu has it */ #endif #if defined(OPTERON_ERRATUM_91) int opteron_erratum_91; /* if non-zero -> at least one cpu has it */ #endif #if defined(OPTERON_ERRATUM_93) int opteron_erratum_93; /* if non-zero -> at least one cpu has it */ #endif #if defined(OPTERON_ERRATUM_95) int opteron_erratum_95; /* if non-zero -> at least one cpu has it */ #endif #if defined(OPTERON_ERRATUM_100) int opteron_erratum_100; /* if non-zero -> at least one cpu has it */ #endif #if defined(OPTERON_ERRATUM_108) int opteron_erratum_108; /* if non-zero -> at least one cpu has it */ #endif #if defined(OPTERON_ERRATUM_109) int opteron_erratum_109; /* if non-zero -> at least one cpu has it */ #endif #if defined(OPTERON_ERRATUM_121) int opteron_erratum_121; /* if non-zero -> at least one cpu has it */ #endif #if defined(OPTERON_ERRATUM_122) int opteron_erratum_122; /* if non-zero -> at least one cpu has it */ #endif #if defined(OPTERON_ERRATUM_123) int opteron_erratum_123; /* if non-zero -> at least one cpu has it */ #endif #if defined(OPTERON_ERRATUM_131) int opteron_erratum_131; /* if non-zero -> at least one cpu has it */ #endif #if defined(OPTERON_WORKAROUND_6336786) int opteron_workaround_6336786; /* non-zero -> WA relevant and applied */ int opteron_workaround_6336786_UP = 0; /* Not needed for UP */ #endif #if defined(OPTERON_WORKAROUND_6323525) int opteron_workaround_6323525; /* if non-zero -> at least one cpu has it */ #endif static void workaround_warning(cpu_t *cp, uint_t erratum) { cmn_err(CE_WARN, "cpu%d: no workaround for erratum %u", cp->cpu_id, erratum); } static void workaround_applied(uint_t erratum) { if (erratum > 1000000) cmn_err(CE_CONT, "?workaround applied for cpu issue #%d\n", erratum); else cmn_err(CE_CONT, "?workaround applied for cpu erratum #%d\n", erratum); } static void msr_warning(cpu_t *cp, const char *rw, uint_t msr, int error) { cmn_err(CE_WARN, "cpu%d: couldn't %smsr 0x%x, error %d", cp->cpu_id, rw, msr, error); } /* * Determine the number of nodes in an Opteron / Greyhound family system. */ static uint_t opteron_get_nnodes(void) { static uint_t nnodes = 0; #ifdef DEBUG uint_t family; family = cpuid_getfamily(CPU); ASSERT(family == 0xf || family == 0x10); #endif /* DEBUG */ if (nnodes == 0) { /* * Obtain the number of nodes in the system from * bits [6:4] of the Node ID register on node 0. * * The actual node count is NodeID[6:4] + 1 * * The Node ID register is accessed via function 0, * offset 0x60. Node 0 is device 24. */ nnodes = ((pci_getl_func(0, 24, 0, 0x60) & 0x70) >> 4) + 1; } return (nnodes); } #if defined(__xpv) /* * On dom0, we can determine the number of physical cpus on the machine. * This number is important when figuring out what workarounds are * appropriate, so compute it now. */ static uint_t xen_get_nphyscpus(void) { static uint_t nphyscpus = 0; ASSERT(DOMAIN_IS_INITDOMAIN(xen_info)); if (nphyscpus == 0) { xen_sysctl_t op; xen_sysctl_physinfo_t *pi = &op.u.physinfo; op.cmd = XEN_SYSCTL_physinfo; op.interface_version = XEN_SYSCTL_INTERFACE_VERSION; if (HYPERVISOR_sysctl(&op) == 0) nphyscpus = pi->threads_per_core * pi->cores_per_socket * pi->sockets_per_node * pi->nr_nodes; } return (nphyscpus); } #endif uint_t workaround_errata(struct cpu *cpu) { uint_t missing = 0; ASSERT(cpu == CPU); /*LINTED*/ if (cpuid_opteron_erratum(cpu, 88) > 0) { /* * SWAPGS May Fail To Read Correct GS Base */ #if defined(OPTERON_ERRATUM_88) /* * The workaround is an mfence in the relevant assembler code */ opteron_erratum_88++; #else workaround_warning(cpu, 88); missing++; #endif } if (cpuid_opteron_erratum(cpu, 91) > 0) { /* * Software Prefetches May Report A Page Fault */ #if defined(OPTERON_ERRATUM_91) /* * fix is in trap.c */ opteron_erratum_91++; #else workaround_warning(cpu, 91); missing++; #endif } if (cpuid_opteron_erratum(cpu, 93) > 0) { /* * RSM Auto-Halt Restart Returns to Incorrect RIP */ #if defined(OPTERON_ERRATUM_93) /* * fix is in trap.c */ opteron_erratum_93++; #else workaround_warning(cpu, 93); missing++; #endif } /*LINTED*/ if (cpuid_opteron_erratum(cpu, 95) > 0) { /* * RET Instruction May Return to Incorrect EIP */ #if defined(OPTERON_ERRATUM_95) #if defined(_LP64) /* * Workaround this by ensuring that 32-bit user code and * 64-bit kernel code never occupy the same address * range mod 4G. */ if (_userlimit32 > 0xc0000000ul) *(uintptr_t *)&_userlimit32 = 0xc0000000ul; /*LINTED*/ ASSERT((uint32_t)COREHEAP_BASE == 0xc0000000u); opteron_erratum_95++; #endif /* _LP64 */ #else workaround_warning(cpu, 95); missing++; #endif } if (cpuid_opteron_erratum(cpu, 100) > 0) { /* * Compatibility Mode Branches Transfer to Illegal Address */ #if defined(OPTERON_ERRATUM_100) /* * fix is in trap.c */ opteron_erratum_100++; #else workaround_warning(cpu, 100); missing++; #endif } /*LINTED*/ if (cpuid_opteron_erratum(cpu, 108) > 0) { /* * CPUID Instruction May Return Incorrect Model Number In * Some Processors */ #if defined(OPTERON_ERRATUM_108) /* * (Our cpuid-handling code corrects the model number on * those processors) */ #else workaround_warning(cpu, 108); missing++; #endif } /*LINTED*/ if (cpuid_opteron_erratum(cpu, 109) > 0) do { /* * Certain Reverse REP MOVS May Produce Unpredictable Behaviour */ #if defined(OPTERON_ERRATUM_109) /* * The "workaround" is to print a warning to upgrade the BIOS */ uint64_t value; const uint_t msr = MSR_AMD_PATCHLEVEL; int err; if ((err = checked_rdmsr(msr, &value)) != 0) { msr_warning(cpu, "rd", msr, err); workaround_warning(cpu, 109); missing++; } if (value == 0) opteron_erratum_109++; #else workaround_warning(cpu, 109); missing++; #endif /*CONSTANTCONDITION*/ } while (0); /*LINTED*/ if (cpuid_opteron_erratum(cpu, 121) > 0) { /* * Sequential Execution Across Non_Canonical Boundary Caused * Processor Hang */ #if defined(OPTERON_ERRATUM_121) #if defined(_LP64) /* * Erratum 121 is only present in long (64 bit) mode. * Workaround is to include the page immediately before the * va hole to eliminate the possibility of system hangs due to * sequential execution across the va hole boundary. */ if (opteron_erratum_121) opteron_erratum_121++; else { if (hole_start) { hole_start -= PAGESIZE; } else { /* * hole_start not yet initialized by * mmu_init. Initialize hole_start * with value to be subtracted. */ hole_start = PAGESIZE; } opteron_erratum_121++; } #endif /* _LP64 */ #else workaround_warning(cpu, 121); missing++; #endif } /*LINTED*/ if (cpuid_opteron_erratum(cpu, 122) > 0) do { /* * TLB Flush Filter May Cause Coherency Problem in * Multiprocessor Systems */ #if defined(OPTERON_ERRATUM_122) uint64_t value; const uint_t msr = MSR_AMD_HWCR; int error; /* * Erratum 122 is only present in MP configurations (multi-core * or multi-processor). */ #if defined(__xpv) if (!DOMAIN_IS_INITDOMAIN(xen_info)) break; if (!opteron_erratum_122 && xen_get_nphyscpus() == 1) break; #else if (!opteron_erratum_122 && opteron_get_nnodes() == 1 && cpuid_get_ncpu_per_chip(cpu) == 1) break; #endif /* disable TLB Flush Filter */ if ((error = checked_rdmsr(msr, &value)) != 0) { msr_warning(cpu, "rd", msr, error); workaround_warning(cpu, 122); missing++; } else { value |= (uint64_t)AMD_HWCR_FFDIS; if ((error = checked_wrmsr(msr, value)) != 0) { msr_warning(cpu, "wr", msr, error); workaround_warning(cpu, 122); missing++; } } opteron_erratum_122++; #else workaround_warning(cpu, 122); missing++; #endif /*CONSTANTCONDITION*/ } while (0); /*LINTED*/ if (cpuid_opteron_erratum(cpu, 123) > 0) do { /* * Bypassed Reads May Cause Data Corruption of System Hang in * Dual Core Processors */ #if defined(OPTERON_ERRATUM_123) uint64_t value; const uint_t msr = MSR_AMD_PATCHLEVEL; int err; /* * Erratum 123 applies only to multi-core cpus. */ if (cpuid_get_ncpu_per_chip(cpu) < 2) break; #if defined(__xpv) if (!DOMAIN_IS_INITDOMAIN(xen_info)) break; #endif /* * The "workaround" is to print a warning to upgrade the BIOS */ if ((err = checked_rdmsr(msr, &value)) != 0) { msr_warning(cpu, "rd", msr, err); workaround_warning(cpu, 123); missing++; } if (value == 0) opteron_erratum_123++; #else workaround_warning(cpu, 123); missing++; #endif /*CONSTANTCONDITION*/ } while (0); /*LINTED*/ if (cpuid_opteron_erratum(cpu, 131) > 0) do { /* * Multiprocessor Systems with Four or More Cores May Deadlock * Waiting for a Probe Response */ #if defined(OPTERON_ERRATUM_131) uint64_t nbcfg; const uint_t msr = MSR_AMD_NB_CFG; const uint64_t wabits = AMD_NB_CFG_SRQ_HEARTBEAT | AMD_NB_CFG_SRQ_SPR; int error; /* * Erratum 131 applies to any system with four or more cores. */ if (opteron_erratum_131) break; #if defined(__xpv) if (!DOMAIN_IS_INITDOMAIN(xen_info)) break; if (xen_get_nphyscpus() < 4) break; #else if (opteron_get_nnodes() * cpuid_get_ncpu_per_chip(cpu) < 4) break; #endif /* * Print a warning if neither of the workarounds for * erratum 131 is present. */ if ((error = checked_rdmsr(msr, &nbcfg)) != 0) { msr_warning(cpu, "rd", msr, error); workaround_warning(cpu, 131); missing++; } else if ((nbcfg & wabits) == 0) { opteron_erratum_131++; } else { /* cannot have both workarounds set */ ASSERT((nbcfg & wabits) != wabits); } #else workaround_warning(cpu, 131); missing++; #endif /*CONSTANTCONDITION*/ } while (0); /* * This isn't really an erratum, but for convenience the * detection/workaround code lives here and in cpuid_opteron_erratum. */ if (cpuid_opteron_erratum(cpu, 6336786) > 0) { #if defined(OPTERON_WORKAROUND_6336786) /* * Disable C1-Clock ramping on multi-core/multi-processor * K8 platforms to guard against TSC drift. */ if (opteron_workaround_6336786) { opteron_workaround_6336786++; #if defined(__xpv) } else if ((DOMAIN_IS_INITDOMAIN(xen_info) && xen_get_nphyscpus() > 1) || opteron_workaround_6336786_UP) { /* * XXPV Hmm. We can't walk the Northbridges on * the hypervisor; so just complain and drive * on. This probably needs to be fixed in * the hypervisor itself. */ opteron_workaround_6336786++; workaround_warning(cpu, 6336786); #else /* __xpv */ } else if ((opteron_get_nnodes() * cpuid_get_ncpu_per_chip(cpu) > 1) || opteron_workaround_6336786_UP) { uint_t node, nnodes; uint8_t data; nnodes = opteron_get_nnodes(); for (node = 0; node < nnodes; node++) { /* * Clear PMM7[1:0] (function 3, offset 0x87) * Northbridge device is the node id + 24. */ data = pci_getb_func(0, node + 24, 3, 0x87); data &= 0xFC; pci_putb_func(0, node + 24, 3, 0x87, data); } opteron_workaround_6336786++; #endif /* __xpv */ } #else workaround_warning(cpu, 6336786); missing++; #endif } /*LINTED*/ /* * Mutex primitives don't work as expected. */ if (cpuid_opteron_erratum(cpu, 6323525) > 0) { #if defined(OPTERON_WORKAROUND_6323525) /* * This problem only occurs with 2 or more cores. If bit in * MSR_BU_CFG set, then not applicable. The workaround * is to patch the semaphone routines with the lfence * instruction to provide necessary load memory barrier with * possible subsequent read-modify-write ops. * * It is too early in boot to call the patch routine so * set erratum variable to be done in startup_end(). */ if (opteron_workaround_6323525) { opteron_workaround_6323525++; #if defined(__xpv) } else if (x86_feature & X86_SSE2) { if (DOMAIN_IS_INITDOMAIN(xen_info)) { /* * XXPV Use dom0_msr here when extended * operations are supported? */ if (xen_get_nphyscpus() > 1) opteron_workaround_6323525++; } else { /* * We have no way to tell how many physical * cpus there are, or even if this processor * has the problem, so enable the workaround * unconditionally (at some performance cost). */ opteron_workaround_6323525++; } #else /* __xpv */ } else if ((x86_feature & X86_SSE2) && ((opteron_get_nnodes() * cpuid_get_ncpu_per_chip(cpu)) > 1)) { if ((xrdmsr(MSR_BU_CFG) & 0x02) == 0) opteron_workaround_6323525++; #endif /* __xpv */ } #else workaround_warning(cpu, 6323525); missing++; #endif } #ifdef __xpv return (0); #else return (missing); #endif } void workaround_errata_end() { #if defined(OPTERON_ERRATUM_88) if (opteron_erratum_88) workaround_applied(88); #endif #if defined(OPTERON_ERRATUM_91) if (opteron_erratum_91) workaround_applied(91); #endif #if defined(OPTERON_ERRATUM_93) if (opteron_erratum_93) workaround_applied(93); #endif #if defined(OPTERON_ERRATUM_95) if (opteron_erratum_95) workaround_applied(95); #endif #if defined(OPTERON_ERRATUM_100) if (opteron_erratum_100) workaround_applied(100); #endif #if defined(OPTERON_ERRATUM_108) if (opteron_erratum_108) workaround_applied(108); #endif #if defined(OPTERON_ERRATUM_109) if (opteron_erratum_109) { cmn_err(CE_WARN, "BIOS microcode patch for AMD Athlon(tm) 64/Opteron(tm)" " processor\nerratum 109 was not detected; updating your" " system's BIOS to a version\ncontaining this" " microcode patch is HIGHLY recommended or erroneous" " system\noperation may occur.\n"); } #endif #if defined(OPTERON_ERRATUM_121) if (opteron_erratum_121) workaround_applied(121); #endif #if defined(OPTERON_ERRATUM_122) if (opteron_erratum_122) workaround_applied(122); #endif #if defined(OPTERON_ERRATUM_123) if (opteron_erratum_123) { cmn_err(CE_WARN, "BIOS microcode patch for AMD Athlon(tm) 64/Opteron(tm)" " processor\nerratum 123 was not detected; updating your" " system's BIOS to a version\ncontaining this" " microcode patch is HIGHLY recommended or erroneous" " system\noperation may occur.\n"); } #endif #if defined(OPTERON_ERRATUM_131) if (opteron_erratum_131) { cmn_err(CE_WARN, "BIOS microcode patch for AMD Athlon(tm) 64/Opteron(tm)" " processor\nerratum 131 was not detected; updating your" " system's BIOS to a version\ncontaining this" " microcode patch is HIGHLY recommended or erroneous" " system\noperation may occur.\n"); } #endif #if defined(OPTERON_WORKAROUND_6336786) if (opteron_workaround_6336786) workaround_applied(6336786); #endif #if defined(OPTERON_WORKAROUND_6323525) if (opteron_workaround_6323525) workaround_applied(6323525); #endif } static cpuset_t procset; /* * Start a single cpu, assuming that the kernel context is available * to successfully start another cpu. * * (For example, real mode code is mapped into the right place * in memory and is ready to be run.) */ int start_cpu(processorid_t who) { void *ctx; cpu_t *cp; int delays; int error = 0; ASSERT(who != 0); /* * Check if there's at least a Mbyte of kmem available * before attempting to start the cpu. */ if (kmem_avail() < 1024 * 1024) { /* * Kick off a reap in case that helps us with * later attempts .. */ kmem_reap(); return (ENOMEM); } cp = mp_startup_init(who); if ((ctx = mach_cpucontext_alloc(cp)) == NULL || (error = mach_cpu_start(cp, ctx)) != 0) { /* * Something went wrong before we even started it */ if (ctx) cmn_err(CE_WARN, "cpu%d: failed to start error %d", cp->cpu_id, error); else cmn_err(CE_WARN, "cpu%d: failed to allocate context", cp->cpu_id); if (ctx) mach_cpucontext_free(cp, ctx, error); else error = EAGAIN; /* hmm. */ mp_startup_fini(cp, error); return (error); } for (delays = 0; !CPU_IN_SET(procset, who); delays++) { if (delays == 500) { /* * After five seconds, things are probably looking * a bit bleak - explain the hang. */ cmn_err(CE_NOTE, "cpu%d: started, " "but not running in the kernel yet", who); } else if (delays > 2000) { /* * We waited at least 20 seconds, bail .. */ error = ETIMEDOUT; cmn_err(CE_WARN, "cpu%d: timed out", who); mach_cpucontext_free(cp, ctx, error); mp_startup_fini(cp, error); return (error); } /* * wait at least 10ms, then check again.. */ delay(USEC_TO_TICK_ROUNDUP(10000)); } mach_cpucontext_free(cp, ctx, 0); #ifndef __xpv if (tsc_gethrtime_enable) tsc_sync_master(who); #endif if (dtrace_cpu_init != NULL) { /* * DTrace CPU initialization expects cpu_lock to be held. */ mutex_enter(&cpu_lock); (*dtrace_cpu_init)(who); mutex_exit(&cpu_lock); } while (!CPU_IN_SET(cpu_ready_set, who)) delay(1); return (0); } /*ARGSUSED*/ void start_other_cpus(int cprboot) { uint_t who; uint_t skipped = 0; uint_t bootcpuid = 0; /* * Initialize our own cpu_info. */ init_cpu_info(CPU); /* * Initialize our syscall handlers */ init_cpu_syscall(CPU); /* * Take the boot cpu out of the mp_cpus set because we know * it's already running. Add it to the cpu_ready_set for * precisely the same reason. */ CPUSET_DEL(mp_cpus, bootcpuid); CPUSET_ADD(cpu_ready_set, bootcpuid); /* * if only 1 cpu or not using MP, skip the rest of this */ if (CPUSET_ISNULL(mp_cpus) || use_mp == 0) { if (use_mp == 0) cmn_err(CE_CONT, "?***** Not in MP mode\n"); goto done; } /* * perform such initialization as is needed * to be able to take CPUs on- and off-line. */ cpu_pause_init(); xc_init(); /* initialize processor crosscalls */ if (mach_cpucontext_init() != 0) goto done; flushes_require_xcalls = 1; /* * We lock our affinity to the master CPU to ensure that all slave CPUs * do their TSC syncs with the same CPU. */ affinity_set(CPU_CURRENT); for (who = 0; who < NCPU; who++) { if (!CPU_IN_SET(mp_cpus, who)) continue; ASSERT(who != bootcpuid); if (ncpus >= max_ncpus) { skipped = who; continue; } if (start_cpu(who) != 0) CPUSET_DEL(mp_cpus, who); } #if !defined(__xpv) /* Free the space allocated to hold the microcode file */ ucode_free(); #endif affinity_clear(); if (skipped) { cmn_err(CE_NOTE, "System detected %d cpus, but " "only %d cpu(s) were enabled during boot.", skipped + 1, ncpus); cmn_err(CE_NOTE, "Use \"boot-ncpus\" parameter to enable more CPU(s). " "See eeprom(1M)."); } done: workaround_errata_end(); mach_cpucontext_fini(); cmi_post_mpstartup(); } /* * Dummy functions - no i86pc platforms support dynamic cpu allocation. */ /*ARGSUSED*/ int mp_cpu_configure(int cpuid) { return (ENOTSUP); /* not supported */ } /*ARGSUSED*/ int mp_cpu_unconfigure(int cpuid) { return (ENOTSUP); /* not supported */ } /* * Startup function for 'other' CPUs (besides boot cpu). * Called from real_mode_start. * * WARNING: until CPU_READY is set, mp_startup and routines called by * mp_startup should not call routines (e.g. kmem_free) that could call * hat_unload which requires CPU_READY to be set. */ void mp_startup(void) { struct cpu *cp = CPU; uint_t new_x86_feature; /* * We need to get TSC on this proc synced (i.e., any delta * from cpu0 accounted for) as soon as we can, because many * many things use gethrtime/pc_gethrestime, including * interrupts, cmn_err, etc. */ /* Let cpu0 continue into tsc_sync_master() */ CPUSET_ATOMIC_ADD(procset, cp->cpu_id); #ifndef __xpv if (tsc_gethrtime_enable) tsc_sync_slave(); #endif /* * Once this was done from assembly, but it's safer here; if * it blocks, we need to be able to swtch() to and from, and * since we get here by calling t_pc, we need to do that call * before swtch() overwrites it. */ (void) (*ap_mlsetup)(); new_x86_feature = cpuid_pass1(cp); #ifndef __xpv /* * Program this cpu's PAT */ if (x86_feature & X86_PAT) pat_sync(); #endif /* * Set up TSC_AUX to contain the cpuid for this processor * for the rdtscp instruction. */ if (x86_feature & X86_TSCP) (void) wrmsr(MSR_AMD_TSCAUX, cp->cpu_id); /* * Initialize this CPU's syscall handlers */ init_cpu_syscall(cp); /* * Enable interrupts with spl set to LOCK_LEVEL. LOCK_LEVEL is the * highest level at which a routine is permitted to block on * an adaptive mutex (allows for cpu poke interrupt in case * the cpu is blocked on a mutex and halts). Setting LOCK_LEVEL blocks * device interrupts that may end up in the hat layer issuing cross * calls before CPU_READY is set. */ splx(ipltospl(LOCK_LEVEL)); sti(); /* * Do a sanity check to make sure this new CPU is a sane thing * to add to the collection of processors running this system. * * XXX Clearly this needs to get more sophisticated, if x86 * systems start to get built out of heterogenous CPUs; as is * likely to happen once the number of processors in a configuration * gets large enough. */ if ((x86_feature & new_x86_feature) != x86_feature) { cmn_err(CE_CONT, "?cpu%d: %b\n", cp->cpu_id, new_x86_feature, FMT_X86_FEATURE); cmn_err(CE_WARN, "cpu%d feature mismatch", cp->cpu_id); } /* * We do not support cpus with mixed monitor/mwait support if the * boot cpu supports monitor/mwait. */ if ((x86_feature & ~new_x86_feature) & X86_MWAIT) panic("unsupported mixed cpu monitor/mwait support detected"); /* * We could be more sophisticated here, and just mark the CPU * as "faulted" but at this point we'll opt for the easier * answer of dieing horribly. Provided the boot cpu is ok, * the system can be recovered by booting with use_mp set to zero. */ if (workaround_errata(cp) != 0) panic("critical workaround(s) missing for cpu%d", cp->cpu_id); cpuid_pass2(cp); cpuid_pass3(cp); (void) cpuid_pass4(cp); init_cpu_info(cp); mutex_enter(&cpu_lock); /* * Processor group initialization for this CPU is dependent on the * cpuid probing, which must be done in the context of the current * CPU. */ pghw_physid_create(cp); pg_cpu_init(cp); pg_cmt_cpu_startup(cp); cp->cpu_flags |= CPU_RUNNING | CPU_READY | CPU_ENABLE | CPU_EXISTS; cpu_add_active(cp); if (dtrace_cpu_init != NULL) { (*dtrace_cpu_init)(cp->cpu_id); } #if !defined(__xpv) /* * Fill out cpu_ucode_info. Update microcode if necessary. */ ucode_check(cp); #endif mutex_exit(&cpu_lock); /* * Enable preemption here so that contention for any locks acquired * later in mp_startup may be preempted if the thread owning those * locks is continously executing on other CPUs (for example, this * CPU must be preemptible to allow other CPUs to pause it during their * startup phases). It's safe to enable preemption here because the * CPU state is pretty-much fully constructed. */ curthread->t_preempt = 0; add_cpunode2devtree(cp->cpu_id, cp->cpu_m.mcpu_cpi); /* The base spl should still be at LOCK LEVEL here */ ASSERT(cp->cpu_base_spl == ipltospl(LOCK_LEVEL)); set_base_spl(); /* Restore the spl to its proper value */ (void) spl0(); /* enable interrupts */ #ifndef __xpv { /* * Set up the CPU module for this CPU. This can't be done * before this CPU is made CPU_READY, because we may (in * heterogeneous systems) need to go load another CPU module. * The act of attempting to load a module may trigger a * cross-call, which will ASSERT unless this cpu is CPU_READY. */ cmi_hdl_t hdl; if ((hdl = cmi_init(CMI_HDL_NATIVE, cmi_ntv_hwchipid(CPU), cmi_ntv_hwcoreid(CPU), cmi_ntv_hwstrandid(CPU))) != NULL) { if (x86_feature & X86_MCA) cmi_mca_init(hdl); } } #endif /* __xpv */ if (boothowto & RB_DEBUG) kdi_cpu_init(); /* * Setting the bit in cpu_ready_set must be the last operation in * processor initialization; the boot CPU will continue to boot once * it sees this bit set for all active CPUs. */ CPUSET_ATOMIC_ADD(cpu_ready_set, cp->cpu_id); /* * Because mp_startup() gets fired off after init() starts, we * can't use the '?' trick to do 'boot -v' printing - so we * always direct the 'cpu .. online' messages to the log. */ cmn_err(CE_CONT, "!cpu%d initialization complete - online\n", cp->cpu_id); /* * Now we are done with the startup thread, so free it up. */ thread_exit(); panic("mp_startup: cannot return"); /*NOTREACHED*/ } /* * Start CPU on user request. */ /* ARGSUSED */ int mp_cpu_start(struct cpu *cp) { ASSERT(MUTEX_HELD(&cpu_lock)); return (0); } /* * Stop CPU on user request. */ /* ARGSUSED */ int mp_cpu_stop(struct cpu *cp) { extern int cbe_psm_timer_mode; ASSERT(MUTEX_HELD(&cpu_lock)); #ifdef __xpv /* * We can't offline vcpu0. */ if (cp->cpu_id == 0) return (EBUSY); #endif /* * If TIMER_PERIODIC mode is used, CPU0 is the one running it; * can't stop it. (This is true only for machines with no TSC.) */ if ((cbe_psm_timer_mode == TIMER_PERIODIC) && (cp->cpu_id == 0)) return (EBUSY); return (0); } /* * Take the specified CPU out of participation in interrupts. */ int cpu_disable_intr(struct cpu *cp) { if (psm_disable_intr(cp->cpu_id) != DDI_SUCCESS) return (EBUSY); cp->cpu_flags &= ~CPU_ENABLE; return (0); } /* * Allow the specified CPU to participate in interrupts. */ void cpu_enable_intr(struct cpu *cp) { ASSERT(MUTEX_HELD(&cpu_lock)); cp->cpu_flags |= CPU_ENABLE; psm_enable_intr(cp->cpu_id); } /*ARGSUSED*/ void mp_cpu_faulted_enter(struct cpu *cp) { #ifndef __xpv cmi_hdl_t hdl = cmi_hdl_lookup(CMI_HDL_NATIVE, cmi_ntv_hwchipid(cp), cmi_ntv_hwcoreid(cp), cmi_ntv_hwstrandid(cp)); if (hdl != NULL) { cmi_faulted_enter(hdl); cmi_hdl_rele(hdl); } #endif } /*ARGSUSED*/ void mp_cpu_faulted_exit(struct cpu *cp) { #ifndef __xpv cmi_hdl_t hdl = cmi_hdl_lookup(CMI_HDL_NATIVE, cmi_ntv_hwchipid(cp), cmi_ntv_hwcoreid(cp), cmi_ntv_hwstrandid(cp)); if (hdl != NULL) { cmi_faulted_exit(hdl); cmi_hdl_rele(hdl); } #endif } /* * The following two routines are used as context operators on threads belonging * to processes with a private LDT (see sysi86). Due to the rarity of such * processes, these routines are currently written for best code readability and * organization rather than speed. We could avoid checking x86_feature at every * context switch by installing different context ops, depending on the * x86_feature flags, at LDT creation time -- one for each combination of fast * syscall feature flags. */ /*ARGSUSED*/ void cpu_fast_syscall_disable(void *arg) { if ((x86_feature & (X86_MSR | X86_SEP)) == (X86_MSR | X86_SEP)) cpu_sep_disable(); if ((x86_feature & (X86_MSR | X86_ASYSC)) == (X86_MSR | X86_ASYSC)) cpu_asysc_disable(); } /*ARGSUSED*/ void cpu_fast_syscall_enable(void *arg) { if ((x86_feature & (X86_MSR | X86_SEP)) == (X86_MSR | X86_SEP)) cpu_sep_enable(); if ((x86_feature & (X86_MSR | X86_ASYSC)) == (X86_MSR | X86_ASYSC)) cpu_asysc_enable(); } static void cpu_sep_enable(void) { ASSERT(x86_feature & X86_SEP); ASSERT(curthread->t_preempt || getpil() >= LOCK_LEVEL); wrmsr(MSR_INTC_SEP_CS, (uint64_t)(uintptr_t)KCS_SEL); } static void cpu_sep_disable(void) { ASSERT(x86_feature & X86_SEP); ASSERT(curthread->t_preempt || getpil() >= LOCK_LEVEL); /* * Setting the SYSENTER_CS_MSR register to 0 causes software executing * the sysenter or sysexit instruction to trigger a #gp fault. */ wrmsr(MSR_INTC_SEP_CS, 0); } static void cpu_asysc_enable(void) { ASSERT(x86_feature & X86_ASYSC); ASSERT(curthread->t_preempt || getpil() >= LOCK_LEVEL); wrmsr(MSR_AMD_EFER, rdmsr(MSR_AMD_EFER) | (uint64_t)(uintptr_t)AMD_EFER_SCE); } static void cpu_asysc_disable(void) { ASSERT(x86_feature & X86_ASYSC); ASSERT(curthread->t_preempt || getpil() >= LOCK_LEVEL); /* * Turn off the SCE (syscall enable) bit in the EFER register. Software * executing syscall or sysret with this bit off will incur a #ud trap. */ wrmsr(MSR_AMD_EFER, rdmsr(MSR_AMD_EFER) & ~((uint64_t)(uintptr_t)AMD_EFER_SCE)); }