/* * Copyright 2008 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #ifndef _SYS_MPI_CNFG_H #define _SYS_MPI_CNFG_H #pragma ident "%Z%%M% %I% %E% SMI" #ifdef __cplusplus extern "C" { #endif /* * Config Message and Structures */ typedef struct config_page_header { uint8_t PageVersion; uint8_t PageLength; uint8_t PageNumber; uint8_t PageType; } config_page_header_t; typedef union config_page_header_union { config_page_header_t Struct; uint8_t Bytes[4]; uint16_t Word16[2]; uint32_t Word32; } config_page_header_union_t; /* * The extended header is used for 1064 and on */ typedef struct config_extended_page_header { uint8_t PageVersion; uint8_t Reserved1; uint8_t PageNumber; uint8_t PageType; uint16_t ExtPageLength; uint8_t ExtPageType; uint8_t Reserved2; } config_extended_page_header_t; /* * PageType field values */ #define MPI_CONFIG_PAGEATTR_READ_ONLY 0x00 #define MPI_CONFIG_PAGEATTR_CHANGEABLE 0x10 #define MPI_CONFIG_PAGEATTR_PERSISTENT 0x20 #define MPI_CONFIG_PAGEATTR_RO_PERSISTENT 0x30 #define MPI_CONFIG_PAGEATTR_MASK 0xF0 #define MPI_CONFIG_PAGETYPE_IO_UNIT 0x00 #define MPI_CONFIG_PAGETYPE_IOC 0x01 #define MPI_CONFIG_PAGETYPE_BIOS 0x02 #define MPI_CONFIG_PAGETYPE_SCSI_PORT 0x03 #define MPI_CONFIG_PAGETYPE_SCSI_DEVICE 0x04 #define MPI_CONFIG_PAGETYPE_FC_PORT 0x05 #define MPI_CONFIG_PAGETYPE_FC_DEVICE 0x06 #define MPI_CONFIG_PAGETYPE_LAN 0x07 #define MPI_CONFIG_PAGETYPE_RAID_VOLUME 0x08 #define MPI_CONFIG_PAGETYPE_MANUFACTURING 0x09 #define MPI_CONFIG_PAGETYPE_RAID_PHYSDISK 0x0A #define MPI_CONFIG_PAGETYPE_INBAND 0x0B #define MPI_CONFIG_PAGETYPE_EXTENDED 0x0F #define MPI_CONFIG_PAGETYPE_MASK 0x0F #define MPI_CONFIG_TYPENUM_MASK 0x0FFF /* * ExtPageType field values */ #define MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT 0x10 #define MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER 0x11 #define MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE 0x12 #define MPI_CONFIG_EXTPAGETYPE_SAS_PHY 0x13 /* * Page Address field values */ #define MPI_SCSI_PORT_PGAD_PORT_MASK 0x000000FF #define MPI_SCSI_DEVICE_TARGET_ID_MASK 0x000000FF #define MPI_SCSI_DEVICE_TARGET_ID_SHIFT 0 #define MPI_SCSI_DEVICE_BUS_MASK 0x0000FF00 #define MPI_SCSI_DEVICE_BUS_SHIFT 8 #define MPI_FC_PORT_PGAD_PORT_MASK 0xF0000000 #define MPI_FC_PORT_PGAD_PORT_SHIFT 28 #define MPI_FC_PORT_PGAD_FORM_MASK 0x0F000000 #define MPI_FC_PORT_PGAD_FORM_INDEX 0x01000000 #define MPI_FC_PORT_PGAD_INDEX_MASK 0x0000FFFF #define MPI_FC_PORT_PGAD_INDEX_SHIFT 0 #define MPI_FC_DEVICE_PGAD_PORT_MASK 0xF0000000 #define MPI_FC_DEVICE_PGAD_PORT_SHIFT 28 #define MPI_FC_DEVICE_PGAD_FORM_MASK 0x0F000000 #define MPI_FC_DEVICE_PGAD_FORM_NEXT_DID 0x00000000 #define MPI_FC_DEVICE_PGAD_ND_PORT_MASK 0xF0000000 #define MPI_FC_DEVICE_PGAD_ND_PORT_SHIFT 28 #define MPI_FC_DEVICE_PGAD_ND_DID_MASK 0x00FFFFFF #define MPI_FC_DEVICE_PGAD_ND_DID_SHIFT 0 #define MPI_FC_DEVICE_PGAD_FORM_BUS_TID 0x01000000 #define MPI_FC_DEVICE_PGAD_BT_BUS_MASK 0x0000FF00 #define MPI_FC_DEVICE_PGAD_BT_BUS_SHIFT 8 #define MPI_FC_DEVICE_PGAD_BT_TID_MASK 0x000000FF #define MPI_FC_DEVICE_PGAD_BT_TID_SHIFT 0 #define MPI_PHYSDISK_PGAD_PHYSDISKNUM_MASK 0x000000FF #define MPI_PHYSDISK_PGAD_PHYSDISKNUM_SHIFT 0 #define MPI_SAS_EXPAND_PGAD_FORM_MASK 0xF0000000 #define MPI_SAS_EXPAND_PGAD_FORM_SHIFT 28 #define MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE 0x00000000 #define MPI_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM 0x00000001 #define MPI_SAS_EXPAND_PGAD_FORM_HANDLE 0x00000002 #define MPI_SAS_EXPAND_PGAD_GNH_MASK_HANDLE 0x0000FFFF #define MPI_SAS_EXPAND_PGAD_GNH_SHIFT_HANDLE 0 #define MPI_SAS_EXPAND_PGAD_HPN_MASK_PHY 0x00FF0000 #define MPI_SAS_EXPAND_PGAD_HPN_SHIFT_PHY 16 #define MPI_SAS_EXPAND_PGAD_HPN_MASK_HANDLE 0x0000FFFF #define MPI_SAS_EXPAND_PGAD_HPN_SHIFT_HANDLE 0 #define MPI_SAS_EXPAND_PGAD_H_MASK_HANDLE 0x0000FFFF #define MPI_SAS_EXPAND_PGAD_H_SHIFT_HANDLE 0 #define MPI_SAS_DEVICE_PGAD_FORM_MASK 0xF0000000 #define MPI_SAS_DEVICE_PGAD_FORM_SHIFT 28 #define MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE 0x00000000 #define MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID 0x00000001 #define MPI_SAS_DEVICE_PGAD_FORM_HANDLE 0x00000002 #define MPI_SAS_DEVICE_PGAD_GNH_HANDLE_MASK 0x0000FFFF #define MPI_SAS_DEVICE_PGAD_GNH_HANDLE_SHIFT 0 #define MPI_SAS_DEVICE_PGAD_BT_BUS_MASK 0x0000FF00 #define MPI_SAS_DEVICE_PGAD_BT_BUS_SHIFT 8 #define MPI_SAS_DEVICE_PGAD_BT_TID_MASK 0x000000FF #define MPI_SAS_DEVICE_PGAD_BT_TID_SHIFT 0 #define MPI_SAS_DEVICE_PGAD_H_HANDLE_MASK 0x0000FFFF #define MPI_SAS_DEVICE_PGAD_H_HANDLE_SHIFT 0 #define MPI_SAS_PHY_PGAD_PHY_NUMBER_MASK 0x000000FF #define MPI_SAS_PHY_PGAD_PHY_NUMBER_SHIFT 0 /* * Config Message */ typedef struct msg_config { uint8_t Action; uint8_t Reserved; uint8_t ChainOffset; uint8_t Function; uint16_t ExtPageLength; /* 1064 only */ uint8_t ExtPageType; /* 1064 only */ uint8_t MsgFlags; uint32_t MsgContext; uint8_t Reserved2[8]; config_page_header_t Header; uint32_t PageAddress; sge_io_union_t PageBufferSGE; } msg_config_t; /* * Action field values */ #define MPI_CONFIG_ACTION_PAGE_HEADER 0x00 #define MPI_CONFIG_ACTION_PAGE_READ_CURRENT 0x01 #define MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT 0x02 #define MPI_CONFIG_ACTION_PAGE_DEFAULT 0x03 #define MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM 0x04 #define MPI_CONFIG_ACTION_PAGE_READ_DEFAULT 0x05 #define MPI_CONFIG_ACTION_PAGE_READ_NVRAM 0x06 /* * Config Reply Message */ typedef struct msg_config_reply { uint8_t Action; uint8_t Reserved; uint8_t MsgLength; uint8_t Function; uint16_t ExtPageLength; uint8_t ExtPageType; uint8_t MsgFlags; uint32_t MsgContext; uint8_t Reserved2[2]; uint16_t IOCStatus; uint32_t IOCLogInfo; config_page_header_t Header; } msg_config_reply_t; /* * Manufacturing Config pages */ #define MPI_MANUFACTPAGE_VENDORID_LSILOGIC 0x1000 #define MPI_MANUFACTPAGE_DEVICEID_FC909 0x0621 #define MPI_MANUFACTPAGE_DEVICEID_FC919 0x0624 #define MPI_MANUFACTPAGE_DEVICEID_FC929 0x0622 #define MPI_MANUFACTPAGE_DEVICEID_FC919X 0x0628 #define MPI_MANUFACTPAGE_DEVICEID_FC929X 0x0626 #define MPI_MANUFACTPAGE_DEVID_53C1030 0x0030 #define MPI_MANUFACTPAGE_DEVID_53C1030ZC 0x0031 #define MPI_MANUFACTPAGE_DEVID_1030_53C1035 0x0032 #define MPI_MANUFACTPAGE_DEVID_1030ZC_53C1035 0x0033 #define MPI_MANUFACTPAGE_DEVID_53C1035 0x0040 #define MPI_MANUFACTPAGE_DEVID_53C1035ZC 0x0041 #define MPI_MANUFACTPAGE_DEVID_SAS1064 0x0050 typedef struct config_page_manufacturing_0 { config_page_header_t Header; uint8_t ChipName[16]; uint8_t ChipRevision[8]; uint8_t BoardName[16]; uint8_t BoardAssembly[16]; uint8_t BoardTracerNumber[16]; } config_page_manufacturing_0_t; #define MPI_MANUFACTURING0_PAGEVERSION 0x00 typedef struct config_page_manufacturing_1 { config_page_header_t Header; uint8_t VPD[256]; } config_page_manufacturing_1_t; #define MPI_MANUFACTURING1_PAGEVERSION 0x00 typedef struct mpi_chip_revision_id { uint16_t DeviceID; uint8_t PCIRevisionID; uint8_t Reserved; } mpi_chip_revision_id_t; /* * Host code (drivers, BIOS, utilities, etc.) should leave this * define set to one and check Header.PageLength at runtime. */ #ifndef MPI_MAN_PAGE_2_HW_SETTINGS_WORDS #define MPI_MAN_PAGE_2_HW_SETTINGS_WORDS 1 #endif typedef struct config_page_manufacturing_2 { config_page_header_t Header; mpi_chip_revision_id_t ChipId; uint32_t HwSettings[MPI_MAN_PAGE_2_HW_SETTINGS_WORDS]; } config_page_manufacturing_2_t; #define MPI_MANUFACTURING2_PAGEVERSION 0x00 /* * Host code (drivers, BIOS, utilities, etc.) should leave this * define set to one and check Header.PageLength at runtime. */ #ifndef MPI_MAN_PAGE_3_INFO_WORDS #define MPI_MAN_PAGE_3_INFO_WORDS 1 #endif typedef struct config_page_manufacturing_3 { config_page_header_t Header; mpi_chip_revision_id_t ChipId; uint32_t Info[MPI_MAN_PAGE_3_INFO_WORDS]; } config_page_manufacturing_3_t; #define MPI_MANUFACTURING3_PAGEVERSION 0x00 typedef struct config_page_manufacturing_4 { config_page_header_t Header; uint32_t Reserved1; uint8_t InfoOffset0; uint8_t InfoSize0; uint8_t InfoOffset1; uint8_t InfoSize1; uint8_t InquirySize; uint8_t Flags; uint16_t Reserved2; uint8_t InquiryData[56]; uint32_t ISVolumeSettings; uint32_t IMEVolumeSettings; uint32_t IMVolumeSettings; } config_page_manufacturing_4_t; #define MPI_MANUFACTURING4_PAGEVERSION 0x01 #define MPI_MANPAGE4_IR_NO_MIX_SAS_SATA 0x01 typedef struct config_page_manufacturing_5 { config_page_header_t Header; uint64_t BaseWWID; } config_page_manufacturing_5_t; #define MPI_MANUFACTURING5_PAGEVERSION 0x00 typedef struct config_page_manufacturing_6 { config_page_header_t Header; uint32_t ProductSpecificInfo; } config_page_manufacturing_6_t; #define MPI_MANUFACTURING6_PAGEVERSION 0x00 /* * IO Unit Config Pages */ typedef struct config_page_io_unit_0 { config_page_header_t Header; uint64_t UniqueValue; } config_page_io_unit_0_t; #define MPI_IOUNITPAGE0_PAGEVERSION 0x00 typedef struct config_page_io_unit_1 { config_page_header_t Header; uint32_t Flags; } config_page_io_unit_1_t; #define MPI_IOUNITPAGE1_PAGEVERSION 0x01 #define MPI_IOUNITPAGE1_MULTI_FUNCTION 0x00000000 #define MPI_IOUNITPAGE1_SINGLE_FUNCTION 0x00000001 #define MPI_IOUNITPAGE1_MULTI_PATHING 0x00000002 #define MPI_IOUNITPAGE1_SINGLE_PATHING 0x00000000 #define MPI_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID 0x00000004 #define MPI_IOUNITPAGE1_DISABLE_QUEUE_FULL_HANDLING 0x00000020 #define MPI_IOUNITPAGE1_DISABLE_IR 0x00000040 #define MPI_IOUNITPAGE1_FORCE_32 0x00000080 #define MPI_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE 0x00000100 typedef struct mpi_adapter_info { uint8_t PciBusNumber; uint8_t PciDeviceAndFunctionNumber; uint16_t AdapterFlags; } mpi_adapter_info_t; #define MPI_ADAPTER_INFO_FLAGS_EMBEDDED 0x0001 #define MPI_ADAPTER_INFO_FLAGS_INIT_STATUS 0x0002 typedef struct config_page_io_unit_2 { config_page_header_t Header; uint32_t Flags; uint32_t BiosVersion; mpi_adapter_info_t AdapterOrder[4]; } config_page_io_unit_2_t; #define MPI_IOUNITPAGE2_PAGEVERSION 0x00 #define MPI_IOUNITPAGE2_FLAGS_PAUSE_ON_ERROR 0x00000002 #define MPI_IOUNITPAGE2_FLAGS_VERBOSE_ENABLE 0x00000004 #define MPI_IOUNITPAGE2_FLAGS_COLOR_VIDEO_DISABLE 0x00000008 #define MPI_IOUNITPAGE2_FLAGS_DONT_HOOK_INT_40 0x00000010 #define MPI_IOUNITPAGE2_FLAGS_DEV_LIST_DISPLAY_MASK 0x000000E0 #define MPI_IOUNITPAGE2_FLAGS_INSTALLED_DEV_DISPLAY 0x00000000 #define MPI_IOUNITPAGE2_FLAGS_ADAPTER_DISPLAY 0x00000020 #define MPI_IOUNITPAGE2_FLAGS_ADAPTER_DEV_DISPLAY 0x00000040 /* * Host code (drivers, BIOS, utilities, etc.) should leave this * define set to one and check Header.PageLength at runtime. */ #ifndef MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX #define MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX 1 #endif typedef struct config_page_io_unit_3 { config_page_header_t Header; uint8_t GPIOCount; uint8_t Reserved1; uint16_t Reserved2; uint16_t GPIOVal[MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX]; } config_page_io_unit_3_t; #define MPI_IOUNITPAGE3_PAGEVERSION 0x01 #define MPI_IOUNITPAGE3_GPIO_FUNCTION_MASK 0xFC #define MPI_IOUNITPAGE3_GPIO_FUNCTION_SHIFT 2 #define MPI_IOUNITPAGE3_GPIO_SETTING_OFF 0x00 #define MPI_IOUNITPAGE3_GPIO_SETTING_ON 0x01 /* * IOC Config Pages */ typedef struct config_page_ioc_0 { config_page_header_t Header; uint32_t TotalNVStore; uint32_t FreeNVStore; uint16_t VendorID; uint16_t DeviceID; uint8_t RevisionID; uint8_t Reserved[3]; uint32_t ClassCode; uint16_t SubsystemVendorID; uint16_t SubsystemID; } config_page_ioc_0_t; #define MPI_IOCPAGE0_PAGEVERSION 0x01 typedef struct config_page_ioc_1 { config_page_header_t Header; uint32_t Flags; uint32_t CoalescingTimeout; uint8_t CoalescingDepth; uint8_t PCISlotNum; uint8_t Reserved[2]; } config_page_ioc_1_t; #define MPI_IOCPAGE1_PAGEVERSION 0x01 #define MPI_IOCPAGE1_EEDP_HOST_SUPPORTS_DIF 0x08000000 #define MPI_IOCPAGE1_EEDP_MODE_MASK 0x07000000 #define MPI_IOCPAGE1_EEDP_MODE_OFF 0x00000000 #define MPI_IOCPAGE1_EEDP_MODE_T10 0x01000000 #define MPI_IOCPAGE1_EEDP_MODE_LSI_1 0x02000000 #define MPI_IOCPAGE1_EEDP_MODE_LSI_2 0x03000000 #define MPI_IOCPAGE1_REPLY_COALESCING 0x00000001 #define MPI_IOCPAGE1_PCISLOTNUM_UNKNOWN 0xFF typedef struct config_page_ioc_2_raid_vol { uint8_t VolumeID; uint8_t VolumeBus; uint8_t VolumeIOC; uint8_t VolumePageNumber; uint8_t VolumeType; uint8_t Flags; uint16_t Reserved3; } config_page_ioc_2_raid_vol_t; #define MPI_RAID_VOL_TYPE_IS 0x00 #define MPI_RAID_VOL_TYPE_IME 0x01 #define MPI_RAID_VOL_TYPE_IM 0x02 #define MPI_IOCPAGE2_FLAG_VOLUME_INACTIVE 0x08 /* * Host code (drivers, BIOS, utilities, etc.) should leave this * define set to one and check Header.PageLength at runtime. */ #ifndef MPI_IOC_PAGE_2_RAID_VOLUME_MAX #define MPI_IOC_PAGE_2_RAID_VOLUME_MAX 1 #endif typedef struct config_page_ioc_2 { config_page_header_t Header; uint32_t CapabilitiesFlags; uint8_t NumActiveVolumes; uint8_t MaxVolumes; uint8_t NumActivePhysDisks; uint8_t MaxPhysDisks; config_page_ioc_2_raid_vol_t RaidVolume[MPI_IOC_PAGE_2_RAID_VOLUME_MAX]; } config_page_ioc_2_t; #define MPI_IOCPAGE2_PAGEVERSION 0x02 /* * IOC Page 2 Capabilities flags */ #define MPI_IOCPAGE2_CAP_FLAGS_IS_SUPPORT 0x00000001 #define MPI_IOCPAGE2_CAP_FLAGS_IME_SUPPORT 0x00000002 #define MPI_IOCPAGE2_CAP_FLAGS_IM_SUPPORT 0x00000004 #define MPI_IOCPAGE2_CAP_FLAGS_SES_SUPPORT 0x20000000 #define MPI_IOCPAGE2_CAP_FLAGS_SAFTE_SUPPORT 0x40000000 #define MPI_IOCPAGE2_CAP_FLAGS_CROSS_CHANNEL_SUPPORT 0x80000000 typedef struct ioc_3_phys_disk { uint8_t PhysDiskID; uint8_t PhysDiskBus; uint8_t PhysDiskIOC; uint8_t PhysDiskNum; } ioc_3_phys_disk_t; /* * Host code (drivers, BIOS, utilities, etc.) should leave this * define set to one and check Header.PageLength at runtime. */ #ifndef MPI_IOC_PAGE_3_PHYSDISK_MAX #define MPI_IOC_PAGE_3_PHYSDISK_MAX 1 #endif typedef struct config_page_ioc_3 { config_page_header_t Header; uint8_t NumPhysDisks; uint8_t Reserved1; uint16_t Reserved2; ioc_3_phys_disk_t PhysDisk[MPI_IOC_PAGE_3_PHYSDISK_MAX]; } config_page_ioc_3_t; #define MPI_IOCPAGE3_PAGEVERSION 0x00 typedef struct ioc_4_sep { uint8_t SEPTargetID; uint8_t SEPBus; uint16_t Reserved; } ioc_4_sep_t; /* * Host code (drivers, BIOS, utilities, etc.) should leave this * define set to one and check Header.PageLength at runtime. */ #ifndef MPI_IOC_PAGE_4_SEP_MAX #define MPI_IOC_PAGE_4_SEP_MAX 1 #endif typedef struct config_page_ioc_4 { config_page_header_t Header; uint8_t ActiveSEP; uint8_t MaxSEP; uint16_t Reserved1; ioc_4_sep_t SEP[MPI_IOC_PAGE_4_SEP_MAX]; } config_page_ioc_4_t; #define MPI_IOCPAGE4_PAGEVERSION 0x00 /* * SCSI Port Config Pages */ typedef struct config_page_scsi_port_0 { config_page_header_t Header; uint32_t Capabilities; uint32_t PhysicalInterface; } config_page_scsi_port_0_t; #define MPI_SCSIPORTPAGE0_PAGEVERSION 0x01 /* * Capabilities */ #define MPI_SCSIPORTPAGE0_CAP_IU 0x00000001 #define MPI_SCSIPORTPAGE0_CAP_DT 0x00000002 #define MPI_SCSIPORTPAGE0_CAP_QAS 0x00000004 #define MPI_SCSIPORTPAGE0_CAP_PACING_TRANSFERS 0x00000008 #define MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK 0x0000FF00 #define MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK 0x00FF0000 #define MPI_SCSIPORTPAGE0_CAP_WIDE 0x20000000 #define MPI_SCSIPORTPAGE0_CAP_AIP 0x80000000 /* * Physical Interface */ #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK 0x00000003 #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD 0x01 #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE 0x02 #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_LVD 0x03 typedef struct config_page_scsi_port_1 { config_page_header_t Header; uint32_t Configuration; uint32_t OnBusTimerValue; } config_page_scsi_port_1_t; #define MPI_SCSIPORTPAGE1_PAGEVERSION 0x02 #define MPI_SCSIPORTPAGE1_CFG_PORT_SCSI_ID_MASK 0x000000FF #define MPI_SCSIPORTPAGE1_CFG_PORT_RESPONSE_ID_MASK 0xFFFF0000 typedef struct mpi_device_info { uint8_t Timeout; uint8_t SyncFactor; uint16_t DeviceFlags; } mpi_device_info_t; typedef struct config_page_scsi_port_2 { config_page_header_t Header; uint32_t PortFlags; uint32_t PortSettings; mpi_device_info_t DeviceSettings[16]; } config_page_scsi_port_2_t; #define MPI_SCSIPORTPAGE2_PAGEVERSION 0x01 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_SCAN_HIGH_TO_LOW 0x00000001 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET 0x00000004 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_ALTERNATE_CHS 0x00000008 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_TERMINATION_DISABLE 0x00000010 #define MPI_SCSIPORTPAGE2_PORT_HOST_ID_MASK 0x0000000F #define MPI_SCSIPORTPAGE2_PORT_MASK_INIT_HBA 0x00000030 #define MPI_SCSIPORTPAGE2_PORT_DISABLE_INIT_HBA 0x00000000 #define MPI_SCSIPORTPAGE2_PORT_BIOS_INIT_HBA 0x00000010 #define MPI_SCSIPORTPAGE2_PORT_OS_INIT_HBA 0x00000020 #define MPI_SCSIPORTPAGE2_PORT_BIOS_OS_INIT_HBA 0x00000030 #define MPI_SCSIPORTPAGE2_PORT_REMOVABLE_MEDIA 0x000000C0 #define MPI_SCSIPORTPAGE2_PORT_SPINUP_DELAY_MASK 0x00000F00 #define MPI_SCSIPORTPAGE2_PORT_MASK_NEGO_MASTER_SETTINGS 0x00003000 #define MPI_SCSIPORTPAGE2_PORT_NEGO_MASTER_SETTINGS 0x00000000 #define MPI_SCSIPORTPAGE2_PORT_NONE_MASTER_SETTINGS 0x00001000 #define MPI_SCSIPORTPAGE2_PORT_ALL_MASTER_SETTINGS 0x00003000 #define MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE 0x0001 #define MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE 0x0002 #define MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE 0x0004 #define MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE 0x0008 #define MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE 0x0010 #define MPI_SCSIPORTPAGE2_DEVICE_BOOT_CHOICE 0x0020 /* * SCSI Target Device Config Pages */ typedef struct config_page_scsi_device_0 { config_page_header_t Header; uint32_t NegotiatedParameters; uint32_t Information; } config_page_scsi_device_0_t; #define MPI_SCSIDEVPAGE0_PAGEVERSION 0x02 #define MPI_SCSIDEVPAGE0_NP_IU 0x00000001 #define MPI_SCSIDEVPAGE0_NP_DT 0x00000002 #define MPI_SCSIDEVPAGE0_NP_QAS 0x00000004 #define MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK 0x0000FF00 #define MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK 0x00FF0000 #define MPI_SCSIDEVPAGE0_NP_WIDE 0x20000000 #define MPI_SCSIDEVPAGE0_NP_AIP 0x80000000 #define MPI_SCSIDEVPAGE0_NP_IDP 0x08000000 #define MPI_SCSIDEVPAGE0_INFO_PARAMS_NEGOTIATED 0x00000001 #define MPI_SCSIDEVPAGE0_INFO_SDTR_REJECTED 0x00000002 #define MPI_SCSIDEVPAGE0_INFO_WDTR_REJECTED 0x00000004 #define MPI_SCSIDEVPAGE0_INFO_PPR_REJECTED 0x00000008 typedef struct config_page_scsi_device_1 { config_page_header_t Header; uint32_t RequestedParameters; uint32_t Reserved; uint32_t Configuration; } config_page_scsi_device_1_t; #define MPI_SCSIDEVPAGE1_PAGEVERSION 0x03 #define MPI_SCSIDEVPAGE1_RP_IU 0x00000001 #define MPI_SCSIDEVPAGE1_RP_DT 0x00000002 #define MPI_SCSIDEVPAGE1_RP_QAS 0x00000004 #define MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK 0x0000FF00 #define MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK 0x00FF0000 #define MPI_SCSIDEVPAGE1_RP_WIDE 0x20000000 #define MPI_SCSIDEVPAGE1_RP_AIP 0x80000000 #define MPI_SCSIDEVPAGE1_RP_IDP 0x08000000 #define MPI_SCSIDEVPAGE1_DV_LVD_DRIVE_STRENGTH_MASK 0x00000003 #define MPI_SCSIDEVPAGE1_DV_SE_SLEW_RATE_MASK 0x00000300 #define MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED 0x00000002 #define MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED 0x00000004 typedef struct config_page_scsi_device_2 { config_page_header_t Header; uint32_t DomainValidation; uint32_t ParityPipeSelect; uint32_t DataPipeSelect; } config_page_scsi_device_2_t; #define MPI_SCSIDEVPAGE2_PAGEVERSION 0x00 #define MPI_SCSIDEVPAGE2_DV_ISI_ENABLE 0x00000010 #define MPI_SCSIDEVPAGE2_DV_SECONDARY_DRIVER_ENABLE 0x00000020 #define MPI_SCSIDEVPAGE2_DV_SLEW_RATE_CTRL 0x00000380 #define MPI_SCSIDEVPAGE2_DV_PRIM_DRIVE_STR_CTRL 0x00001C00 #define MPI_SCSIDEVPAGE2_DV_SECOND_DRIVE_STR_CTRL 0x0000E000 #define MPI_SCSIDEVPAGE2_DV_XCLKH_ST 0x10000000 #define MPI_SCSIDEVPAGE2_DV_XCLKS_ST 0x20000000 #define MPI_SCSIDEVPAGE2_DV_XCLKH_DT 0x40000000 #define MPI_SCSIDEVPAGE2_DV_XCLKS_DT 0x80000000 #define MPI_SCSIDEVPAGE2_PPS_PPS_MASK 0x00000003 #define MPI_SCSIDEVPAGE2_DPS_BIT_0_PL_SELECT_MASK 0x00000003 #define MPI_SCSIDEVPAGE2_DPS_BIT_1_PL_SELECT_MASK 0x0000000C #define MPI_SCSIDEVPAGE2_DPS_BIT_2_PL_SELECT_MASK 0x00000030 #define MPI_SCSIDEVPAGE2_DPS_BIT_3_PL_SELECT_MASK 0x000000C0 #define MPI_SCSIDEVPAGE2_DPS_BIT_4_PL_SELECT_MASK 0x00000300 #define MPI_SCSIDEVPAGE2_DPS_BIT_5_PL_SELECT_MASK 0x00000C00 #define MPI_SCSIDEVPAGE2_DPS_BIT_6_PL_SELECT_MASK 0x00003000 #define MPI_SCSIDEVPAGE2_DPS_BIT_7_PL_SELECT_MASK 0x0000C000 #define MPI_SCSIDEVPAGE2_DPS_BIT_8_PL_SELECT_MASK 0x00030000 #define MPI_SCSIDEVPAGE2_DPS_BIT_9_PL_SELECT_MASK 0x000C0000 #define MPI_SCSIDEVPAGE2_DPS_BIT_10_PL_SELECT_MASK 0x00300000 #define MPI_SCSIDEVPAGE2_DPS_BIT_11_PL_SELECT_MASK 0x00C00000 #define MPI_SCSIDEVPAGE2_DPS_BIT_12_PL_SELECT_MASK 0x03000000 #define MPI_SCSIDEVPAGE2_DPS_BIT_13_PL_SELECT_MASK 0x0C000000 #define MPI_SCSIDEVPAGE2_DPS_BIT_14_PL_SELECT_MASK 0x30000000 #define MPI_SCSIDEVPAGE2_DPS_BIT_15_PL_SELECT_MASK 0xC0000000 /* * FC Port Config Pages */ typedef struct config_page_fc_port_0 { config_page_header_t Header; uint32_t Flags; uint8_t MPIPortNumber; uint8_t Reserved[3]; uint32_t PortIdentifier; uint64_t WWNN; uint64_t WWPN; uint32_t SupportedServiceClass; uint32_t SupportedSpeeds; uint32_t CurrentSpeed; uint32_t MaxFrameSize; uint64_t FabricWWNN; uint64_t FabricWWPN; uint32_t DiscoveredPortsCount; uint32_t MaxInitiators; } config_page_fc_port_0_t; #define MPI_FCPORTPAGE0_PAGEVERSION 0x01 #define MPI_FCPORTPAGE0_FLAGS_PROT_MASK 0x0000000F #define MPI_FCPORTPAGE0_FLAGS_PROT_FCP_INIT \ MPI_PORTFACTS_PROTOCOL_INITIATOR #define MPI_FCPORTPAGE0_FLAGS_PROT_FCP_TARG \ MPI_PORTFACTS_PROTOCOL_TARGET #define MPI_FCPORTPAGE0_FLAGS_PROT_LAN \ MPI_PORTFACTS_PROTOCOL_LAN #define MPI_FCPORTPAGE0_FLAGS_PROT_LOGBUSADDR \ MPI_PORTFACTS_PROTOCOL_LOGBUSADDR #define MPI_FCPORTPAGE0_FLAGS_ALIAS_ALPA_SUPPORTED 0x00000010 #define MPI_FCPORTPAGE0_FLAGS_ALIAS_WWN_SUPPORTED 0x00000020 #define MPI_FCPORTPAGE0_FLAGS_FABRIC_WWN_VALID 0x00000030 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_TYPE_MASK 0x00000F00 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_NO_INIT 0x00000000 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_POINT_TO_POINT 0x00000100 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_PRIVATE_LOOP 0x00000200 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_FABRIC_DIRECT 0x00000400 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_PUBLIC_LOOP 0x00000800 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_TYPE_MASK 0x00000F00 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_NO_INIT 0x00000000 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_POINT_TO_POINT 0x00000100 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_PRIVATE_LOOP 0x00000200 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_FABRIC_DIRECT 0x00000400 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_PUBLIC_LOOP 0x00000800 #define MPI_FCPORTPAGE0_LTYPE_RESERVED 0x00 #define MPI_FCPORTPAGE0_LTYPE_OTHER 0x01 #define MPI_FCPORTPAGE0_LTYPE_UNKNOWN 0x02 #define MPI_FCPORTPAGE0_LTYPE_COPPER 0x03 #define MPI_FCPORTPAGE0_LTYPE_SINGLE_1300 0x04 #define MPI_FCPORTPAGE0_LTYPE_SINGLE_1500 0x05 #define MPI_FCPORTPAGE0_LTYPE_50_LASER_MULTI 0x06 #define MPI_FCPORTPAGE0_LTYPE_50_LED_MULTI 0x07 #define MPI_FCPORTPAGE0_LTYPE_62_LASER_MULTI 0x08 #define MPI_FCPORTPAGE0_LTYPE_62_LED_MULTI 0x09 #define MPI_FCPORTPAGE0_LTYPE_MULTI_LONG_WAVE 0x0A #define MPI_FCPORTPAGE0_LTYPE_MULTI_SHORT_WAVE 0x0B #define MPI_FCPORTPAGE0_LTYPE_LASER_SHORT_WAVE 0x0C #define MPI_FCPORTPAGE0_LTYPE_LED_SHORT_WAVE 0x0D #define MPI_FCPORTPAGE0_LTYPE_1300_LONG_WAVE 0x0E #define MPI_FCPORTPAGE0_LTYPE_1500_LONG_WAVE 0x0F #define MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN 0x01 #define MPI_FCPORTPAGE0_PORTSTATE_ONLINE 0x02 #define MPI_FCPORTPAGE0_PORTSTATE_OFFLINE 0x03 #define MPI_FCPORTPAGE0_PORTSTATE_BYPASSED 0x04 #define MPI_FCPORTPAGE0_PORTSTATE_DIAGNOST 0x05 #define MPI_FCPORTPAGE0_PORTSTATE_LINKDOWN 0x06 #define MPI_FCPORTPAGE0_PORTSTATE_ERROR 0x07 #define MPI_FCPORTPAGE0_PORTSTATE_LOOPBACK 0x08 #define MPI_FCPORTPAGE0_SUPPORT_CLASS_1 0x00000001 #define MPI_FCPORTPAGE0_SUPPORT_CLASS_2 0x00000002 #define MPI_FCPORTPAGE0_SUPPORT_CLASS_3 0x00000004 #define MPI_FCPORTPAGE0_SUPPORT_1GBIT_SPEED 0x00000001 #define MPI_FCPORTPAGE0_SUPPORT_2GBIT_SPEED 0x00000002 #define MPI_FCPORTPAGE0_SUPPORT_10GBIT_SPEED 0x00000004 #define MPI_FCPORTPAGE0_CURRENT_SPEED_1GBIT \ MPI_FCPORTPAGE0_SUPPORT_1GBIT_SPEED #define MPI_FCPORTPAGE0_CURRENT_SPEED_2GBIT \ MPI_FCPORTPAGE0_SUPPORT_2GBIT_SPEED #define MPI_FCPORTPAGE0_CURRENT_SPEED_10GBIT \ MPI_FCPORTPAGE0_SUPPORT_10GBIT_SPEED typedef struct config_page_fc_port_1 { config_page_header_t Header; uint32_t Flags; uint64_t NoSEEPROMWWNN; uint64_t NoSEEPROMWWPN; uint8_t HardALPA; uint8_t LinkConfig; uint8_t TopologyConfig; uint8_t Reserved; } config_page_fc_port_1_t; #define MPI_FCPORTPAGE1_PAGEVERSION 0x02 #define MPI_FCPORTPAGE1_FLAGS_EXT_FCP_STATUS_EN 0x08000000 #define MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY 0x04000000 #define MPI_FCPORTPAGE1_FLAGS_SORT_BY_DID 0x00000001 #define MPI_FCPORTPAGE1_FLAGS_SORT_BY_WWN 0x00000000 /* * Flags used for programming protocol modes in NVStore */ #define MPI_FCPORTPAGE1_FLAGS_PROT_MASK 0xF0000000 #define MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT 28 #define MPI_FCPORTPAGE1_FLAGS_PROT_FCP_INIT \ ((uint32_t)MPI_PORTFACTS_PROTOCOL_INITIATOR << \ MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT) #define MPI_FCPORTPAGE1_FLAGS_PROT_FCP_TARG \ ((uint32_t)MPI_PORTFACTS_PROTOCOL_TARGET << \ MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT) #define MPI_FCPORTPAGE1_FLAGS_PROT_LAN \ ((uint32_t)MPI_PORTFACTS_PROTOCOL_LAN << \ MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT) #define MPI_FCPORTPAGE1_FLAGS_PROT_LOGBUSADDR \ ((uint32_t)MPI_PORTFACTS_PROTOCOL_LOGBUSADDR << \ MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT) #define MPI_FCPORTPAGE1_HARD_ALPA_NOT_USED 0xFF #define MPI_FCPORTPAGE1_LCONFIG_SPEED_MASK 0x0F #define MPI_FCPORTPAGE1_LCONFIG_SPEED_1GIG 0x00 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_2GIG 0x01 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_4GIG 0x02 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_10GIG 0x03 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_AUTO 0x0F #define MPI_FCPORTPAGE1_TOPOLOGY_MASK 0x0F #define MPI_FCPORTPAGE1_TOPOLOGY_NLPORT 0x01 #define MPI_FCPORTPAGE1_TOPOLOGY_NPORT 0x02 #define MPI_FCPORTPAGE1_TOPOLOGY_AUTO 0x0F typedef struct config_page_fc_port_2 { config_page_header_t Header; uint8_t NumberActive; uint8_t ALPA[127]; } config_page_fc_port_2_t; #define MPI_FCPORTPAGE2_PAGEVERSION 0x01 typedef struct wwn_format { uint64_t WWNN; uint64_t WWPN; } wwn_format_t; typedef union fc_port_persistent_physical_id { wwn_format_t WWN; uint32_t Did; } fc_port_persistent_physical_id_t; typedef struct fc_port_persistent { fc_port_persistent_physical_id_t PhysicalIdentifier; uint8_t TargetID; uint8_t Bus; uint16_t Flags; } fc_port_persistent_t; #define MPI_PERSISTENT_FLAGS_SHIFT 16 #define MPI_PERSISTENT_FLAGS_ENTRY_VALID 0x0001 #define MPI_PERSISTENT_FLAGS_SCAN_ID 0x0002 #define MPI_PERSISTENT_FLAGS_SCAN_LUNS 0x0004 #define MPI_PERSISTENT_FLAGS_BOOT_DEVICE 0x0008 #define MPI_PERSISTENT_FLAGS_BY_DID 0x0080 /* * Host code (drivers, BIOS, utilities, etc.) should leave this * define set to one and check Header.PageLength at runtime. */ #ifndef MPI_FC_PORT_PAGE_3_ENTRY_MAX #define MPI_FC_PORT_PAGE_3_ENTRY_MAX 1 #endif typedef struct config_page_fc_port_3 { config_page_header_t Header; fc_port_persistent_t Entry[MPI_FC_PORT_PAGE_3_ENTRY_MAX]; } config_page_fc_port_3_t; #define MPI_FCPORTPAGE3_PAGEVERSION 0x01 typedef struct config_page_fc_port_4 { config_page_header_t Header; uint32_t PortFlags; uint32_t PortSettings; } config_page_fc_port_4_t; #define MPI_FCPORTPAGE4_PAGEVERSION 0x00 #define MPI_FCPORTPAGE4_PORT_FLAGS_ALTERNATE_CHS 0x00000008 #define MPI_FCPORTPAGE4_PORT_MASK_INIT_HBA 0x00000030 #define MPI_FCPORTPAGE4_PORT_DISABLE_INIT_HBA 0x00000000 #define MPI_FCPORTPAGE4_PORT_BIOS_INIT_HBA 0x00000010 #define MPI_FCPORTPAGE4_PORT_OS_INIT_HBA 0x00000020 #define MPI_FCPORTPAGE4_PORT_BIOS_OS_INIT_HBA 0x00000030 #define MPI_FCPORTPAGE4_PORT_REMOVABLE_MEDIA 0x000000C0 #define MPI_FCPORTPAGE4_PORT_SPINUP_DELAY_MASK 0x00000F00 typedef struct config_page_fc_port_5_alias_info { uint8_t Flags; uint8_t AliasAlpa; uint16_t Reserved; uint64_t AliasWWNN; uint64_t AliasWWPN; } config_page_fc_port_5_alias_info_t; /* * Host code (drivers, BIOS, utilities, etc.) should leave this * define set to one and check Header.PageLength at runtime. */ #ifndef MPI_FC_PORT_PAGE_5_ALIAS_MAX #define MPI_FC_PORT_PAGE_5_ALIAS_MAX 1 #endif typedef struct config_page_fc_port_5 { config_page_header_t Header; config_page_fc_port_5_alias_info_t AliasInfo[MPI_FC_PORT_PAGE_5_ALIAS_MAX]; } config_page_fc_port_5_t; #define MPI_FCPORTPAGE5_PAGEVERSION 0x00 #define MPI_FCPORTPAGE5_FLAGS_ALIAS_ALPA_VALID 0x01 #define MPI_FCPORTPAGE5_FLAGS_ALIAS_WWN_VALID 0x02 typedef struct config_page_fc_port_6 { config_page_header_t Header; uint32_t Reserved; uint64_t TimeSinceReset; uint64_t TxFrames; uint64_t RxFrames; uint64_t TxWords; uint64_t RxWords; uint64_t LipCount; uint64_t NosCount; uint64_t ErrorFrames; uint64_t DumpedFrames; uint64_t LinkFailureCount; uint64_t LossOfSyncCount; uint64_t LossOfSignalCount; uint64_t PrimativeSeqErrCount; uint64_t InvalidTxWordCount; uint64_t InvalidCrcCount; uint64_t FcpInitiatorIoCount; } config_page_fc_port_6_t; #define MPI_FCPORTPAGE6_PAGEVERSION 0x00 typedef struct config_page_fc_port_7 { config_page_header_t Header; uint32_t Reserved; uint8_t PortSymbolicName[256]; } config_page_fc_port_7_t; #define MPI_FCPORTPAGE7_PAGEVERSION 0x00 typedef struct config_page_fc_port_8 { config_page_header_t Header; uint32_t BitVector[8]; } config_page_fc_port_8_t; #define MPI_FCPORTPAGE8_PAGEVERSION 0x00 typedef struct config_page_fc_port_9 { config_page_header_t Header; uint32_t Reserved; uint64_t GlobalWWPN; uint64_t GlobalWWNN; uint32_t UnitType; uint32_t PhysicalPortNumber; uint32_t NumAttachedNodes; uint16_t IPVersion; uint16_t UDPPortNumber; uint8_t IPAddress[16]; uint16_t Reserved1; uint16_t TopologyDiscoveryFlags; } config_page_fc_port_9_t; #define MPI_FCPORTPAGE9_PAGEVERSION 0x00 /* * FC Device Config Pages */ typedef struct config_page_fc_device_0 { config_page_header_t Header; uint64_t WWNN; uint64_t WWPN; uint32_t PortIdentifier; uint8_t Protocol; uint8_t Flags; uint16_t BBCredit; uint16_t MaxRxFrameSize; uint8_t Reserved1; uint8_t PortNumber; uint8_t FcPhLowestVersion; uint8_t FcPhHighestVersion; uint8_t CurrentTargetID; uint8_t CurrentBus; } config_page_fc_device_0_t; #define MPI_FC_DEVICE_PAGE_0_PAGEVERSION 0x02 #define MPI_FC_DEVICE_PAGE0_FLAGS_TARGETID_BUS_VALID 0x01 #define MPI_FC_DEVICE_PAGE_0_PROT_IP 0x01 #define MPI_FC_DEVICE_PAGE_0_PROT_FCP_TARGET 0x02 #define MPI_FC_DEVICE_PAGE_0_PROT_FCP_INITIATOR 0x04 #define MPI_FC_DEVICE_PAGE0_PGAD_PORT_MASK \ (MPI_FC_DEVICE_PGAD_PORT_MASK) #define MPI_FC_DEVICE_PAGE0_PGAD_FORM_MASK \ (MPI_FC_DEVICE_PGAD_FORM_MASK) #define MPI_FC_DEVICE_PAGE0_PGAD_FORM_NEXT_DID \ (MPI_FC_DEVICE_PGAD_FORM_NEXT_DID) #define MPI_FC_DEVICE_PAGE0_PGAD_FORM_BUS_TID \ (MPI_FC_DEVICE_PGAD_FORM_BUS_TID) #define MPI_FC_DEVICE_PAGE0_PGAD_DID_MASK \ (MPI_FC_DEVICE_PGAD_ND_DID_MASK) #define MPI_FC_DEVICE_PAGE0_PGAD_BUS_MASK \ (MPI_FC_DEVICE_PGAD_BT_BUS_MASK) #define MPI_FC_DEVICE_PAGE0_PGAD_BUS_SHIFT \ (MPI_FC_DEVICE_PGAD_BT_BUS_SHIFT) #define MPI_FC_DEVICE_PAGE0_PGAD_TID_MASK \ (MPI_FC_DEVICE_PGAD_BT_TID_MASK) /* * RAID Volume Config Pages */ typedef struct raid_vol0_phys_disk { uint16_t Reserved; uint8_t PhysDiskMap; uint8_t PhysDiskNum; } raid_vol0_phys_disk_t; #define MPI_RAIDVOL0_PHYSDISK_PRIMARY 0x01 #define MPI_RAIDVOL0_PHYSDISK_SECONDARY 0x02 typedef struct raid_vol0_status { uint8_t Flags; uint8_t State; uint16_t Reserved; } raid_vol0_status_t; /* * RAID Volume Page 0 VolumeStatus defines */ #define MPI_RAIDVOL0_STATUS_FLAG_ENABLED 0x01 #define MPI_RAIDVOL0_STATUS_FLAG_QUIESCED 0x02 #define MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS 0x04 #define MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE 0x08 #define MPI_RAIDVOL0_STATUS_STATE_OPTIMAL 0x00 #define MPI_RAIDVOL0_STATUS_STATE_DEGRADED 0x01 #define MPI_RAIDVOL0_STATUS_STATE_FAILED 0x02 #define MPI_RAIDVOL0_STATUS_STATE_MISSING 0x03 typedef struct raid_vol0_settings { uint16_t Settings; uint8_t HotSparePool; uint8_t Reserved; } raid_vol0_settings_t; /* * RAID Volume Page 0 VolumeSettings defines */ #define MPI_RAIDVOL0_SETTING_WRITE_CACHING_ENABLE 0x0001 #define MPI_RAIDVOL0_SETTING_OFFLINE_ON_SMART 0x0002 #define MPI_RAIDVOL0_SETTING_AUTO_CONFIGURE 0x0004 #define MPI_RAIDVOL0_SETTING_PRIORITY_RESYNC 0x0008 #define MPI_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX 0x0010 #define MPI_RAIDVOL0_SETTING_USE_DEFAULTS 0x8000 /* * RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */ #define MPI_RAID_HOT_SPARE_POOL_0 0x01 #define MPI_RAID_HOT_SPARE_POOL_1 0x02 #define MPI_RAID_HOT_SPARE_POOL_2 0x04 #define MPI_RAID_HOT_SPARE_POOL_3 0x08 #define MPI_RAID_HOT_SPARE_POOL_4 0x10 #define MPI_RAID_HOT_SPARE_POOL_5 0x20 #define MPI_RAID_HOT_SPARE_POOL_6 0x40 #define MPI_RAID_HOT_SPARE_POOL_7 0x80 /* * Host code (drivers, BIOS, utilities, etc.) should leave this * define set to one and check Header.PageLength at runtime. */ #ifndef MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX #define MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX 1 #endif typedef struct config_page_raid_vol_0 { config_page_header_t Header; uint8_t VolumeID; uint8_t VolumeBus; uint8_t VolumeIOC; uint8_t VolumeType; raid_vol0_status_t VolumeStatus; raid_vol0_settings_t VolumeSettings; uint32_t MaxLBA; uint32_t Reserved1; uint32_t StripeSize; uint32_t Reserved2; uint32_t Reserved3; uint8_t NumPhysDisks; uint8_t Reserved4; uint8_t ResyncRate; uint8_t Reserved5; raid_vol0_phys_disk_t PhysDisk[MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX]; } config_page_raid_vol_0_t; #define MPI_RAIDVOLPAGE0_PAGEVERSION 0x00 /* * RAID Physical Disk Config Pages */ typedef struct raid_phys_disk0_error_data { uint8_t ErrorCdbByte; uint8_t ErrorSenseKey; uint16_t Reserved; uint16_t ErrorCount; uint8_t ErrorASC; uint8_t ErrorASCQ; uint16_t SmartCount; uint8_t SmartASC; uint8_t SmartASCQ; } raid_phys_disk0_error_data_t; typedef struct raid_phys_disk_inquiry_data { uint8_t VendorID[8]; uint8_t ProductID[16]; uint8_t ProductRevLevel[4]; uint8_t Info[32]; } raid_phys_disk0_inquiry_data_t; typedef struct raid_phys_disk0_settings { uint8_t SepID; uint8_t SepBus; uint8_t HotSparePool; uint8_t PhysDiskSettings; } raid_phys_disk0_settings_t; typedef struct raid_phys_disk0_status { uint8_t Flags; uint8_t State; uint16_t Reserved; } raid_phys_disk0_status_t; /* * RAID Volume 2 IM Physical Disk DiskStatus flags */ #define MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC 0x01 #define MPI_PHYSDISK0_STATUS_FLAG_QUIESCED 0x02 #define MPI_PHYSDISK0_STATUS_ONLINE 0x00 #define MPI_PHYSDISK0_STATUS_MISSING 0x01 #define MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE 0x02 #define MPI_PHYSDISK0_STATUS_FAILED 0x03 #define MPI_PHYSDISK0_STATUS_INITIALIZING 0x04 #define MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED 0x05 #define MPI_PHYSDISK0_STATUS_FAILED_REQUESTED 0x06 #define MPI_PHYSDISK0_STATUS_OTHER_OFFLINE 0xFF typedef struct config_page_raid_phys_disk_0 { config_page_header_t Header; uint8_t PhysDiskID; uint8_t PhysDiskBus; uint8_t PhysDiskIOC; uint8_t PhysDiskNum; raid_phys_disk0_settings_t PhysDiskSettings; uint32_t Reserved1; uint32_t Reserved2; uint32_t Reserved3; uint8_t DiskIdentifier[16]; raid_phys_disk0_inquiry_data_t InquiryData; raid_phys_disk0_status_t PhysDiskStatus; uint32_t MaxLBA; raid_phys_disk0_error_data_t ErrorData; } config_page_raid_phys_disk_0_t; #define MPI_RAIDPHYSDISKPAGE0_PAGEVERSION 0x00 /* * LAN Config Pages */ typedef struct config_page_lan_0 { config_page_header_t Header; uint16_t TxRxModes; uint16_t Reserved; uint32_t PacketPrePad; } config_page_lan_0_t; #define MPI_LAN_PAGE0_PAGEVERSION 0x01 #define MPI_LAN_PAGE0_RETURN_LOOPBACK 0x0000 #define MPI_LAN_PAGE0_SUPPRESS_LOOPBACK 0x0001 #define MPI_LAN_PAGE0_LOOPBACK_MASK 0x0001 typedef struct config_page_lan_1 { config_page_header_t Header; uint16_t Reserved; uint8_t CurrentDeviceState; uint8_t Reserved1; uint32_t MinPacketSize; uint32_t MaxPacketSize; uint32_t HardwareAddressLow; uint32_t HardwareAddressHigh; uint32_t MaxWireSpeedLow; uint32_t MaxWireSpeedHigh; uint32_t BucketsRemaining; uint32_t MaxReplySize; uint32_t NegWireSpeedLow; uint32_t NegWireSpeedHigh; } config_page_lan_1_t; #define MPI_LAN_PAGE1_PAGEVERSION 0x03 #define MPI_LAN_PAGE1_DEV_STATE_RESET 0x00 #define MPI_LAN_PAGE1_DEV_STATE_OPERATIONAL 0x01 /* * Inband config pages */ typedef struct config_page_inband_0 { config_page_header_t Header; mpi_version_format_t InbandVersion; uint16_t MaximumBuffers; uint16_t Reserved1; } config_page_inband_0_t; /* * SAS IO Unit config pages */ typedef struct mpi_sas_io_unit0_phy_data { uint8_t Port; uint8_t PortFlags; uint8_t PhyFlags; uint8_t NegotiatedLinkRate; uint32_t ControllerPhyDeviceInfo; uint16_t AttachedDeviceHandle; uint16_t ControllerDevHandle; uint32_t Reserved2; } mpi_sas_io_unit0_phy_data_t; /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check Header.PageLength at runtime. */ #ifndef MPI_SAS_IOUNIT0_PHY_MAX #define MPI_SAS_IOUNIT0_PHY_MAX 1 #endif typedef struct config_page_sas_io_unit_0 { config_extended_page_header_t Header; uint32_t Reserved1; uint8_t NumPhys; uint8_t Reserved2; uint16_t Reserved3; mpi_sas_io_unit0_phy_data_t PhyData[MPI_SAS_IOUNIT0_PHY_MAX]; } config_page_sas_io_unit_0_t; #define MPI_SASIOUNITPAGE0_PAGEVERSION 0x00 #define MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS 0x08 #define MPI_SAS_IOUNIT0_PORT_FLAGS_0_TARGET_IOC_NUM 0x00 #define MPI_SAS_IOUNIT0_PORT_FLAGS_1_TARGET_IOC_NUM 0x04 #define MPI_SAS_IOUNIT0_PORT_FLAGS_WAIT_FOR_PORTENABLE 0x02 #define MPI_SAS_IOUNIT0_PORT_FLAGS_AUTO_PORT_CONFIG 0x01 #define MPI_SAS_IOUNIT0_PHY_FLAGS_PHY_DISABLED 0x04 #define MPI_SAS_IOUNIT0_PHY_FLAGS_TX_INVERT 0x02 #define MPI_SAS_IOUNIT0_PHY_FLAGS_RX_INVERT 0x01 #define MPI_SAS_IOUNIT0_RATE_UNKNOWN 0x00 #define MPI_SAS_IOUNIT0_RATE_PHY_DISABLED 0x01 #define MPI_SAS_IOUNIT0_RATE_FAILED_SPEED_NEGOTIATION 0x02 #define MPI_SAS_IOUNIT0_RATE_SATA_OOB_COMPLETE 0x03 #define MPI_SAS_IOUNIT0_RATE_1_5 0x08 #define MPI_SAS_IOUNIT0_RATE_3_0 0x09 typedef struct mpi_sas_io_unit1_phy_data { uint8_t Port; uint8_t PortFlags; uint8_t PhyFlags; uint8_t MaxMinLinkRate; uint32_t ControllerPhyDeviceInfo; uint32_t Reserved1; } mpi_sas_io_unit1_phy_data_t; /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check Header.PageLength at runtime. */ #ifndef MPI_SAS_IOUNIT1_PHY_MAX #define MPI_SAS_IOUNIT1_PHY_MAX 1 #endif typedef struct config_page_sas_io_unit_1 { config_extended_page_header_t Header; uint16_t ControlFlags; uint16_t MaxNumSATATargets; uint16_t AdditionalControlFlags; uint16_t Reserved1; uint8_t NumPhys; uint8_t SATAMaxQDepth; uint8_t ReportMissingDeviceDelay; uint8_t IODeviceMissingDelay; mpi_sas_io_unit1_phy_data_t PhyData[MPI_SAS_IOUNIT1_PHY_MAX]; } config_page_sas_io_unit_1_t; #define MPI_SASIOUNITPAGE1_PAGEVERSION 0x00 #define MPI_SAS_IOUNIT1_PORT_FLAGS_0_TARGET_IOC_NUM 0x00 #define MPI_SAS_IOUNIT1_PORT_FLAGS_1_TARGET_IOC_NUM 0x04 #define MPI_SAS_IOUNIT1_PORT_FLAGS_WAIT_FOR_PORTENABLE 0x02 #define MPI_SAS_IOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG 0x01 #define MPI_SAS_IOUNIT1_PHY_FLAGS_PHY_DISABLE 0x04 #define MPI_SAS_IOUNIT1_PHY_FLAGS_TX_INVERT 0x02 #define MPI_SAS_IOUNIT1_PHY_FLAGS_RX_INVERT 0x01 #define MPI_SAS_IOUNIT1_MAX_RATE_MASK 0xF0 #define MPI_SAS_IOUNIT1_MAX_RATE_1_5 0x80 #define MPI_SAS_IOUNIT1_MAX_RATE_3_0 0x90 #define MPI_SAS_IOUNIT1_MIN_RATE_MASK 0x0F #define MPI_SAS_IOUNIT1_MIN_RATE_1_5 0x08 #define MPI_SAS_IOUNIT1_MIN_RATE_3_0 0x09 typedef struct config_page_sas_io_unit_2 { config_extended_page_header_t Header; uint32_t Reserved1; uint16_t MaxPersistentIDs; uint16_t NumPersistentIDsUsed; uint8_t Status; uint8_t Flags; uint16_t Reserved2; } config_page_sas_io_unit_2_t; #define MPI_SASIOUNITPAGE2_PAGEVERSION 0x00 #define MPI_SAS_IOUNIT2_STATUS_DISABLED_PERSISTENT_MAPPINGS 0x02 #define MPI_SAS_IOUNIT2_STATUS_FULL_PERSISTENT_MAPPINGS 0x01 #define MPI_SAS_IOUNIT2_FLAGS_DISABLE_PERSISTENT_MAPPINGS 0x01 typedef struct config_page_sas_io_unit_3 { config_extended_page_header_t Header; uint32_t Reserved1; uint32_t MaxInvalidDwordCount; uint32_t InvalidDwordCountTime; uint32_t MaxRunningDisparityErrorCount; uint32_t RunningDisparityErrorTime; uint32_t MaxLossDwordSynchCount; uint32_t LossDwordSynchCountTime; uint32_t MaxPhyResetProblemCount; uint32_t PhyResetProblemTime; } config_page_sas_io_unit_3_t; #define MPI_SASIOUNITPAGE3_PAGEVERSION 0x00 typedef struct config_page_sas_expander_0 { config_extended_page_header_t Header; uint8_t PhysicalPort; uint8_t Reserved1; uint16_t EnclosureHandle; uint64_t SASAddress; uint32_t Reserved2; uint16_t DevHandle; uint16_t ParentDevHandle; uint16_t ExpanderChangeCount; uint16_t ExpanderRouteIndexes; uint8_t NumPhys; uint8_t SASLevel; uint8_t Flags; uint8_t Reserved3; } config_page_sas_expander_0_t; #define MPI_SASEXPANDER0_PAGEVERSION 0x00 #define MPI_SAS_EXPANDER0_FLAGS_ROUTE_TABLE_CONFIG 0x02 #define MPI_SAS_EXPANDER0_FLAGS_CONFIG_IN_PROGRESS 0x01 typedef struct config_page_sas_expander_1 { config_extended_page_header_t Header; uint32_t Reserved1; uint8_t NumPhys; uint8_t Phy; uint16_t Reserved2; uint8_t ProgrammedLinkRate; uint8_t HwLinkRate; uint16_t AttachedDevHandle; uint32_t PhyInfo; uint32_t AttachedDeviceInfo; uint16_t OwnerDevHandle; uint8_t ChangeCount; uint8_t Reserved3; uint8_t PhyIdentifier; uint8_t AttachedPhyIdentifier; uint8_t NumTableEntriesProg; uint8_t DiscoveryInfo; uint32_t Reserved4; } config_page_sas_expander_1_t; #define MPI_SASEXPANDER1_PAGEVERSION 0x00 /* use MPI_SAS_PHY0_PRATE_ defines for ProgrammedLinkRate */ /* use MPI_SAS_PHY0_HWRATE_ defines for HwLinkRate */ /* use MPI_SAS_PHY0_PHYINFO_ defines for PhyInfo */ /* see mpi_sas.h for values for SAS Expander Page 1 AttachedDeviceInfo values */ /* values for SAS Expander Page 1 DiscoveryInfo field */ #define MPI_SAS_EXPANDER1_DISCINFO_LINK_STATUS_CHANGE 0x02 #define MPI_SAS_EXPANDER1_DISCINFO_NO_ROUTING_ENTRIES 0x01 typedef struct config_page_sas_device_0 { config_extended_page_header_t Header; uint16_t Slot; uint16_t EnclosureHandle; uint64_t SASAddress; uint16_t ParentDevHandle; uint8_t PhyNum; uint8_t AccessStatus; uint16_t DevHandle; uint8_t TargetID; uint8_t Bus; uint32_t DeviceInfo; uint16_t Flags; uint8_t PhysicalPort; uint8_t Reserved2; } config_page_sas_device_0_t; #define MPI_SASDEVICE0_PAGEVERSION 0x00 #define MPI_SAS_DEVICE0_FLAGS_MAPPING_PERSISTENT 0x04 #define MPI_SAS_DEVICE0_FLAGS_DEVICE_MAPPED 0x02 #define MPI_SAS_DEVICE0_FLAGS_DEVICE_PRESENT 0x01 typedef struct config_page_sas_device_1 { config_extended_page_header_t Header; uint32_t Reserved1; uint64_t SASAddress; uint32_t Reserved2; uint16_t DevHandle; uint8_t TargetID; uint8_t Bus; uint8_t InitialRegDeviceFIS[20]; } config_page_sas_device_1_t; #define MPI_SASDEVICE1_PAGEVERSION 0x00 typedef struct config_page_sas_phy_0 { config_extended_page_header_t Header; uint32_t Reserved1; uint64_t SASAddress; uint16_t AttachedDevHandle; uint8_t AttachedPhyIdentifier; uint8_t Reserved2; uint32_t AttachedDeviceInfo; uint8_t ProgrammedLinkRate; uint8_t HwLinkRate; uint8_t ChangeCount; uint8_t Reserved3; uint32_t PhyInfo; } config_page_sas_phy_0_t; #define MPI_SASPHY0_PAGEVERSION 0x00 #define MPI_SAS_PHY0_PRATE_MAX_RATE_MASK 0xF0 #define MPI_SAS_PHY0_PRATE_MAX_RATE_NOT_PROGRAMMABLE 0x00 #define MPI_SAS_PHY0_PRATE_MAX_RATE_1_5 0x80 #define MPI_SAS_PHY0_PRATE_MAX_RATE_3_0 0x90 #define MPI_SAS_PHY0_PRATE_MIN_RATE_MASK 0x0F #define MPI_SAS_PHY0_PRATE_MIN_RATE_NOT_PROGRAMMABLE 0x00 #define MPI_SAS_PHY0_PRATE_MIN_RATE_1_5 0x08 #define MPI_SAS_PHY0_PRATE_MIN_RATE_3_0 0x09 #define MPI_SAS_PHY0_HWRATE_MAX_RATE_MASK 0xF0 #define MPI_SAS_PHY0_HWRATE_MAX_RATE_1_5 0x80 #define MPI_SAS_PHY0_HWRATE_MAX_RATE_3_0 0x90 #define MPI_SAS_PHY0_HWRATE_MIN_RATE_MASK 0x0F #define MPI_SAS_PHY0_HWRATE_MIN_RATE_1_5 0x08 #define MPI_SAS_PHY0_HWRATE_MIN_RATE_3_0 0x09 #define MPI_SAS_PHY0_PHYINFO_SATA_PORT_ACTIVE 0x00004000 #define MPI_SAS_PHY0_PHYINFO_SATA_PORT_SELECTOR 0x00002000 #define MPI_SAS_PHY0_PHYINFO_VIRTUAL_PHY 0x00001000 #define MPI_SAS_PHY0_PHYINFO_MASK_PARTIAL_PATHWAY_TIME 0x00000F00 #define MPI_SAS_PHY0_PHYINFO_SHIFT_PARTIAL_PATHWAY_TIME 8 #define MPI_SAS_PHY0_PHYINFO_MASK_ROUTING_ATTRIBUTE 0x000000F0 #define MPI_SAS_PHY0_PHYINFO_DIRECT_ROUTING 0x00000000 #define MPI_SAS_PHY0_PHYINFO_SUBTRACTIVE_ROUTING 0x00000010 #define MPI_SAS_PHY0_PHYINFO_TABLE_ROUTING 0x00000020 #define MPI_SAS_PHY0_DEVINFO_SATA_DEVICE 0x00000080 #define MPI_SAS_PHY0_PHYINFO_MASK_LINK_RATE 0x0000000F #define MPI_SAS_PHY0_PHYINFO_UNKNOWN_LINK_RATE 0x00000000 #define MPI_SAS_PHY0_PHYINFO_PHY_DISABLED 0x00000001 #define MPI_SAS_PHY0_PHYINFO_NEGOTIATION_FAILED 0x00000002 #define MPI_SAS_PHY0_PHYINFO_SATA_OOB_COMPLETE 0x00000003 #define MPI_SAS_PHY0_PHYINFO_RATE_1_5 0x00000008 #define MPI_SAS_PHY0_PHYINFO_RATE_3_0 0x00000009 typedef struct config_page_sas_phy_1 { config_extended_page_header_t Header; uint32_t Reserved1; uint32_t InvalidDwordCount; uint32_t RunningDisparityErrorCount; uint32_t LossDwordSynchCount; uint32_t PhyResetProblemCount; } config_page_sas_phy_1_t; #define MPI_SASPHY1_PAGEVERSION 0x00 #ifdef __cplusplus } #endif #endif /* _SYS_MPI_CNFG_H */