/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2007 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #ifndef _SYS_FS_ZFS_H #define _SYS_FS_ZFS_H #pragma ident "%Z%%M% %I% %E% SMI" #include #ifdef __cplusplus extern "C" { #endif /* * Types and constants shared between userland and the kernel. */ /* * Each dataset can be one of the following types. These constants can be * combined into masks that can be passed to various functions. */ typedef enum { ZFS_TYPE_FILESYSTEM = 0x1, ZFS_TYPE_SNAPSHOT = 0x2, ZFS_TYPE_VOLUME = 0x4, ZFS_TYPE_POOL = 0x8 } zfs_type_t; #define ZFS_TYPE_ANY \ (ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME | ZFS_TYPE_SNAPSHOT) /* * Properties are identified by these constants and must be added to the * end of this list to ensure that external consumers are not affected * by the change. The property list also determines how 'zfs get' will * display them. If you make any changes to this list, be sure to update * the property table in usr/src/common/zfs/zfs_prop.c. */ typedef enum { ZFS_PROP_CONT = -2, ZFS_PROP_INVAL = -1, ZFS_PROP_TYPE, ZFS_PROP_CREATION, ZFS_PROP_USED, ZFS_PROP_AVAILABLE, ZFS_PROP_REFERENCED, ZFS_PROP_COMPRESSRATIO, ZFS_PROP_MOUNTED, ZFS_PROP_ORIGIN, ZFS_PROP_QUOTA, ZFS_PROP_RESERVATION, ZFS_PROP_VOLSIZE, ZFS_PROP_VOLBLOCKSIZE, ZFS_PROP_RECORDSIZE, ZFS_PROP_MOUNTPOINT, ZFS_PROP_SHARENFS, ZFS_PROP_CHECKSUM, ZFS_PROP_COMPRESSION, ZFS_PROP_ATIME, ZFS_PROP_DEVICES, ZFS_PROP_EXEC, ZFS_PROP_SETUID, ZFS_PROP_READONLY, ZFS_PROP_ZONED, ZFS_PROP_SNAPDIR, ZFS_PROP_ACLMODE, ZFS_PROP_ACLINHERIT, ZFS_PROP_CREATETXG, /* not exposed to the user */ ZFS_PROP_NAME, /* not exposed to the user */ ZFS_PROP_CANMOUNT, ZFS_PROP_SHAREISCSI, ZFS_PROP_ISCSIOPTIONS, /* not exposed to the user */ ZFS_PROP_XATTR, ZFS_PROP_NUMCLONES, /* not exposed to the user */ ZFS_PROP_COPIES, ZPOOL_PROP_BOOTFS, ZPOOL_PROP_AUTOREPLACE, ZPOOL_PROP_NAME } zfs_prop_t; typedef zfs_prop_t zpool_prop_t; #define ZPOOL_PROP_CONT ZFS_PROP_CONT #define ZPOOL_PROP_INVAL ZFS_PROP_INVAL #define ZFS_PROP_VALUE "value" #define ZFS_PROP_SOURCE "source" typedef enum { ZFS_SRC_NONE = 0x1, ZFS_SRC_DEFAULT = 0x2, ZFS_SRC_TEMPORARY = 0x4, ZFS_SRC_LOCAL = 0x8, ZFS_SRC_INHERITED = 0x10 } zfs_source_t; #define ZFS_SRC_ALL 0x1f /* * The following functions are shared between libzfs and the kernel. */ zfs_prop_t zfs_name_to_prop(const char *); zpool_prop_t zpool_name_to_prop(const char *); boolean_t zfs_prop_user(const char *); int zfs_prop_readonly(zfs_prop_t); const char *zfs_prop_default_string(zfs_prop_t); const char *zfs_prop_to_name(zfs_prop_t); const char *zpool_prop_to_name(zpool_prop_t); uint64_t zfs_prop_default_numeric(zfs_prop_t); int zfs_prop_inheritable(zfs_prop_t); int zfs_prop_string_to_index(zfs_prop_t, const char *, uint64_t *); int zfs_prop_index_to_string(zfs_prop_t, uint64_t, const char **); uint64_t zpool_prop_default_numeric(zpool_prop_t); /* * Property Iterator */ typedef zfs_prop_t (*zfs_prop_f)(zfs_prop_t, void *); typedef zpool_prop_t (*zpool_prop_f)(zpool_prop_t, void *); extern zfs_prop_t zfs_prop_iter(zfs_prop_f, void *, boolean_t); extern zpool_prop_t zpool_prop_iter(zpool_prop_f, void *, boolean_t); /* * On-disk version number. */ #define ZFS_VERSION_1 1ULL #define ZFS_VERSION_2 2ULL #define ZFS_VERSION_3 3ULL #define ZFS_VERSION_4 4ULL #define ZFS_VERSION_5 5ULL #define ZFS_VERSION_6 6ULL /* * When bumping up ZFS_VERSION, make sure GRUB ZFS understand the on-disk * format change. Go to usr/src/grub/grub-0.95/stage2/{zfs-include/, fsys_zfs*}, * and do the appropriate changes. */ #define ZFS_VERSION ZFS_VERSION_6 #define ZFS_VERSION_STRING "6" /* * Symbolic names for the changes that caused a ZFS_VERSION switch. * Used in the code when checking for presence or absence of a feature. * Feel free to define multiple symbolic names for each version if there * were multiple changes to on-disk structures during that version. * * NOTE: When checking the current ZFS_VERSION in your code, be sure * to use spa_version() since it reports the version of the * last synced uberblock. Checking the in-flight version can * be dangerous in some cases. */ #define ZFS_VERSION_INITIAL ZFS_VERSION_1 #define ZFS_VERSION_DITTO_BLOCKS ZFS_VERSION_2 #define ZFS_VERSION_SPARES ZFS_VERSION_3 #define ZFS_VERSION_RAID6 ZFS_VERSION_3 #define ZFS_VERSION_BPLIST_ACCOUNT ZFS_VERSION_3 #define ZFS_VERSION_RAIDZ_DEFLATE ZFS_VERSION_3 #define ZFS_VERSION_DNODE_BYTES ZFS_VERSION_3 #define ZFS_VERSION_ZPOOL_HISTORY ZFS_VERSION_4 #define ZFS_VERSION_GZIP_COMPRESSION ZFS_VERSION_5 #define ZFS_VERSION_BOOTFS ZFS_VERSION_6 /* * The following are configuration names used in the nvlist describing a pool's * configuration. */ #define ZPOOL_CONFIG_VERSION "version" #define ZPOOL_CONFIG_POOL_NAME "name" #define ZPOOL_CONFIG_POOL_STATE "state" #define ZPOOL_CONFIG_POOL_TXG "txg" #define ZPOOL_CONFIG_POOL_GUID "pool_guid" #define ZPOOL_CONFIG_CREATE_TXG "create_txg" #define ZPOOL_CONFIG_TOP_GUID "top_guid" #define ZPOOL_CONFIG_VDEV_TREE "vdev_tree" #define ZPOOL_CONFIG_TYPE "type" #define ZPOOL_CONFIG_CHILDREN "children" #define ZPOOL_CONFIG_ID "id" #define ZPOOL_CONFIG_GUID "guid" #define ZPOOL_CONFIG_PATH "path" #define ZPOOL_CONFIG_DEVID "devid" #define ZPOOL_CONFIG_METASLAB_ARRAY "metaslab_array" #define ZPOOL_CONFIG_METASLAB_SHIFT "metaslab_shift" #define ZPOOL_CONFIG_ASHIFT "ashift" #define ZPOOL_CONFIG_ASIZE "asize" #define ZPOOL_CONFIG_DTL "DTL" #define ZPOOL_CONFIG_STATS "stats" #define ZPOOL_CONFIG_WHOLE_DISK "whole_disk" #define ZPOOL_CONFIG_ERRCOUNT "error_count" #define ZPOOL_CONFIG_NOT_PRESENT "not_present" #define ZPOOL_CONFIG_SPARES "spares" #define ZPOOL_CONFIG_IS_SPARE "is_spare" #define ZPOOL_CONFIG_NPARITY "nparity" #define ZPOOL_CONFIG_HOSTID "hostid" #define ZPOOL_CONFIG_HOSTNAME "hostname" #define ZPOOL_CONFIG_TIMESTAMP "timestamp" /* not stored on disk */ #define ZPOOL_CONFIG_UNSPARE "unspare" #define ZPOOL_CONFIG_PHYS_PATH "phys_path" /* * The persistent vdev state is stored as separate values rather than a single * 'vdev_state' entry. This is because a device can be in multiple states, such * as offline and degraded. */ #define ZPOOL_CONFIG_OFFLINE "offline" #define ZPOOL_CONFIG_FAULTED "faulted" #define ZPOOL_CONFIG_DEGRADED "degraded" #define ZPOOL_CONFIG_REMOVED "removed" #define VDEV_TYPE_ROOT "root" #define VDEV_TYPE_MIRROR "mirror" #define VDEV_TYPE_REPLACING "replacing" #define VDEV_TYPE_RAIDZ "raidz" #define VDEV_TYPE_DISK "disk" #define VDEV_TYPE_FILE "file" #define VDEV_TYPE_MISSING "missing" #define VDEV_TYPE_SPARE "spare" /* * This is needed in userland to report the minimum necessary device size. */ #define SPA_MINDEVSIZE (64ULL << 20) /* * The location of the pool configuration repository, shared between kernel and * userland. */ #define ZPOOL_CACHE_DIR "/etc/zfs" #define ZPOOL_CACHE_FILE "zpool.cache" #define ZPOOL_CACHE_TMP ".zpool.cache" #define ZPOOL_CACHE ZPOOL_CACHE_DIR "/" ZPOOL_CACHE_FILE /* * vdev states are ordered from least to most healthy. * A vdev that's CANT_OPEN or below is considered unusable. */ typedef enum vdev_state { VDEV_STATE_UNKNOWN = 0, /* Uninitialized vdev */ VDEV_STATE_CLOSED, /* Not currently open */ VDEV_STATE_OFFLINE, /* Not allowed to open */ VDEV_STATE_REMOVED, /* Explicitly removed from system */ VDEV_STATE_CANT_OPEN, /* Tried to open, but failed */ VDEV_STATE_FAULTED, /* External request to fault device */ VDEV_STATE_DEGRADED, /* Replicated vdev with unhealthy kids */ VDEV_STATE_HEALTHY /* Presumed good */ } vdev_state_t; #define VDEV_STATE_ONLINE VDEV_STATE_HEALTHY /* * vdev aux states. When a vdev is in the CANT_OPEN state, the aux field * of the vdev stats structure uses these constants to distinguish why. */ typedef enum vdev_aux { VDEV_AUX_NONE, /* no error */ VDEV_AUX_OPEN_FAILED, /* ldi_open_*() or vn_open() failed */ VDEV_AUX_CORRUPT_DATA, /* bad label or disk contents */ VDEV_AUX_NO_REPLICAS, /* insufficient number of replicas */ VDEV_AUX_BAD_GUID_SUM, /* vdev guid sum doesn't match */ VDEV_AUX_TOO_SMALL, /* vdev size is too small */ VDEV_AUX_BAD_LABEL, /* the label is OK but invalid */ VDEV_AUX_VERSION_NEWER, /* on-disk version is too new */ VDEV_AUX_VERSION_OLDER, /* on-disk version is too old */ VDEV_AUX_SPARED, /* hot spare used in another pool */ VDEV_AUX_ERR_EXCEEDED /* too many errors */ } vdev_aux_t; /* * pool state. The following states are written to disk as part of the normal * SPA lifecycle: ACTIVE, EXPORTED, DESTROYED, SPARE. The remaining states are * software abstractions used at various levels to communicate pool state. */ typedef enum pool_state { POOL_STATE_ACTIVE = 0, /* In active use */ POOL_STATE_EXPORTED, /* Explicitly exported */ POOL_STATE_DESTROYED, /* Explicitly destroyed */ POOL_STATE_SPARE, /* Reserved for hot spare use */ POOL_STATE_UNINITIALIZED, /* Internal spa_t state */ POOL_STATE_UNAVAIL, /* Internal libzfs state */ POOL_STATE_POTENTIALLY_ACTIVE /* Internal libzfs state */ } pool_state_t; /* * Scrub types. */ typedef enum pool_scrub_type { POOL_SCRUB_NONE, POOL_SCRUB_RESILVER, POOL_SCRUB_EVERYTHING, POOL_SCRUB_TYPES } pool_scrub_type_t; /* * ZIO types. Needed to interpret vdev statistics below. */ typedef enum zio_type { ZIO_TYPE_NULL = 0, ZIO_TYPE_READ, ZIO_TYPE_WRITE, ZIO_TYPE_FREE, ZIO_TYPE_CLAIM, ZIO_TYPE_IOCTL, ZIO_TYPES } zio_type_t; /* * Vdev statistics. Note: all fields should be 64-bit because this * is passed between kernel and userland as an nvlist uint64 array. */ typedef struct vdev_stat { hrtime_t vs_timestamp; /* time since vdev load */ uint64_t vs_state; /* vdev state */ uint64_t vs_aux; /* see vdev_aux_t */ uint64_t vs_alloc; /* space allocated */ uint64_t vs_space; /* total capacity */ uint64_t vs_dspace; /* deflated capacity */ uint64_t vs_rsize; /* replaceable dev size */ uint64_t vs_ops[ZIO_TYPES]; /* operation count */ uint64_t vs_bytes[ZIO_TYPES]; /* bytes read/written */ uint64_t vs_read_errors; /* read errors */ uint64_t vs_write_errors; /* write errors */ uint64_t vs_checksum_errors; /* checksum errors */ uint64_t vs_self_healed; /* self-healed bytes */ uint64_t vs_scrub_type; /* pool_scrub_type_t */ uint64_t vs_scrub_complete; /* completed? */ uint64_t vs_scrub_examined; /* bytes examined; top */ uint64_t vs_scrub_repaired; /* bytes repaired; leaf */ uint64_t vs_scrub_errors; /* errors during scrub */ uint64_t vs_scrub_start; /* UTC scrub start time */ uint64_t vs_scrub_end; /* UTC scrub end time */ } vdev_stat_t; #define ZFS_DRIVER "zfs" #define ZFS_DEV "/dev/zfs" /* * zvol paths. Irritatingly, the devfsadm interfaces want all these * paths without the /dev prefix, but for some things, we want the * /dev prefix. Below are the names without /dev. */ #define ZVOL_DEV_DIR "zvol/dsk" #define ZVOL_RDEV_DIR "zvol/rdsk" /* * And here are the things we need with /dev, etc. in front of them. */ #define ZVOL_PSEUDO_DEV "/devices/pseudo/zvol@0:" #define ZVOL_FULL_DEV_DIR "/dev/" ZVOL_DEV_DIR #define ZVOL_PROP_NAME "name" /* * /dev/zfs ioctl numbers. */ #define ZFS_IOC ('Z' << 8) typedef enum zfs_ioc { ZFS_IOC_POOL_CREATE = ZFS_IOC, ZFS_IOC_POOL_DESTROY, ZFS_IOC_POOL_IMPORT, ZFS_IOC_POOL_EXPORT, ZFS_IOC_POOL_CONFIGS, ZFS_IOC_POOL_STATS, ZFS_IOC_POOL_TRYIMPORT, ZFS_IOC_POOL_SCRUB, ZFS_IOC_POOL_FREEZE, ZFS_IOC_POOL_UPGRADE, ZFS_IOC_POOL_GET_HISTORY, ZFS_IOC_POOL_LOG_HISTORY, ZFS_IOC_VDEV_ADD, ZFS_IOC_VDEV_REMOVE, ZFS_IOC_VDEV_SET_STATE, ZFS_IOC_VDEV_ATTACH, ZFS_IOC_VDEV_DETACH, ZFS_IOC_VDEV_SETPATH, ZFS_IOC_OBJSET_STATS, ZFS_IOC_DATASET_LIST_NEXT, ZFS_IOC_SNAPSHOT_LIST_NEXT, ZFS_IOC_SET_PROP, ZFS_IOC_CREATE_MINOR, ZFS_IOC_REMOVE_MINOR, ZFS_IOC_CREATE, ZFS_IOC_DESTROY, ZFS_IOC_ROLLBACK, ZFS_IOC_RENAME, ZFS_IOC_RECVBACKUP, ZFS_IOC_SENDBACKUP, ZFS_IOC_INJECT_FAULT, ZFS_IOC_CLEAR_FAULT, ZFS_IOC_INJECT_LIST_NEXT, ZFS_IOC_ERROR_LOG, ZFS_IOC_CLEAR, ZFS_IOC_PROMOTE, ZFS_IOC_DESTROY_SNAPS, ZFS_IOC_SNAPSHOT, ZFS_IOC_DSOBJ_TO_DSNAME, ZFS_IOC_OBJ_TO_PATH, ZFS_IOC_POOL_SET_PROPS, ZFS_IOC_POOL_GET_PROPS } zfs_ioc_t; /* * Internal SPA load state. Used by FMA diagnosis engine. */ typedef enum { SPA_LOAD_NONE, /* no load in progress */ SPA_LOAD_OPEN, /* normal open */ SPA_LOAD_IMPORT, /* import in progress */ SPA_LOAD_TRYIMPORT /* tryimport in progress */ } spa_load_state_t; /* * Bookmark name values. */ #define ZPOOL_ERR_LIST "error list" #define ZPOOL_ERR_DATASET "dataset" #define ZPOOL_ERR_OBJECT "object" #define HIS_MAX_RECORD_LEN (MAXPATHLEN + MAXPATHLEN + 1) /* * The following are names used in the nvlist describing * the pool's history log. */ #define ZPOOL_HIST_RECORD "history record" #define ZPOOL_HIST_TIME "history time" #define ZPOOL_HIST_CMD "history command" /* * Flags for ZFS_IOC_VDEV_SET_STATE */ #define ZFS_ONLINE_CHECKREMOVE 0x1 #define ZFS_ONLINE_UNSPARE 0x2 #define ZFS_ONLINE_FORCEFAULT 0x4 #define ZFS_OFFLINE_TEMPORARY 0x1 /* * Sysevent payload members. ZFS will generate the following sysevents with the * given payloads: * * ESC_ZFS_RESILVER_START * ESC_ZFS_RESILVER_END * ESC_ZFS_POOL_DESTROY * * ZFS_EV_POOL_NAME DATA_TYPE_STRING * ZFS_EV_POOL_GUID DATA_TYPE_UINT64 * * ESC_ZFS_VDEV_REMOVE * ESC_ZFS_VDEV_CLEAR * ESC_ZFS_VDEV_CHECK * * ZFS_EV_POOL_NAME DATA_TYPE_STRING * ZFS_EV_POOL_GUID DATA_TYPE_UINT64 * ZFS_EV_VDEV_PATH DATA_TYPE_STRING (optional) * ZFS_EV_VDEV_GUID DATA_TYPE_UINT64 */ #define ZFS_EV_POOL_NAME "pool_name" #define ZFS_EV_POOL_GUID "pool_guid" #define ZFS_EV_VDEV_PATH "vdev_path" #define ZFS_EV_VDEV_GUID "vdev_guid" #ifdef __cplusplus } #endif #endif /* _SYS_FS_ZFS_H */