/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2009 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #ifndef _NETINET_SCTP_H #define _NETINET_SCTP_H #ifdef __cplusplus extern "C" { #endif #include /* * This file contains the structure defintions and function prototypes * described in the IETF SCTP socket API document. */ /* SCTP association ID type. */ typedef int sctp_assoc_t; typedef int32_t sctp_assoc32_t; /* * SCTP socket options */ #define SCTP_RTOINFO 1 #define SCTP_ASSOCINFO 2 #define SCTP_INITMSG 3 #define SCTP_NODELAY 4 #define SCTP_AUTOCLOSE 5 #define SCTP_SET_PEER_PRIMARY_ADDR 6 #define SCTP_PRIMARY_ADDR 7 #define SCTP_ADAPTATION_LAYER 8 #define SCTP_DISABLE_FRAGMENTS 9 #define SCTP_PEER_ADDR_PARAMS 10 #define SCTP_DEFAULT_SEND_PARAM 11 #define SCTP_EVENTS 12 #define SCTP_I_WANT_MAPPED_V4_ADDR 13 #define SCTP_MAXSEG 14 #define SCTP_STATUS 15 #define SCTP_GET_PEER_ADDR_INFO 16 /* * Private socket options */ #define SCTP_GET_NLADDRS 17 #define SCTP_GET_LADDRS 18 #define SCTP_GET_NPADDRS 19 #define SCTP_GET_PADDRS 20 #define SCTP_ADD_ADDR 21 #define SCTP_REM_ADDR 22 /* * Additional SCTP socket options. This socket option is used to enable or * disable PR-SCTP support prior to establishing an association. By default, * PR-SCTP support is disabled. */ #define SCTP_PRSCTP 23 /* * Ancillary data identifiers */ #define SCTP_SNDRCV 0x100 #define SCTP_INIT 0x101 /* * Notification types */ #define SCTP_ASSOC_CHANGE 1 #define SCTP_PEER_ADDR_CHANGE 2 #define SCTP_REMOTE_ERROR 3 #define SCTP_SEND_FAILED 4 #define SCTP_SHUTDOWN_EVENT 5 #define SCTP_ADAPTATION_INDICATION 6 #define SCTP_PARTIAL_DELIVERY_EVENT 7 /* * SCTP Ancillary Data Definitions */ /* * sctp_initmsg structure provides information for initializing new SCTP * associations with sendmsg(). The SCTP_INITMSG socket option uses * this same data structure. */ struct sctp_initmsg { uint16_t sinit_num_ostreams; uint16_t sinit_max_instreams; uint16_t sinit_max_attempts; uint16_t sinit_max_init_timeo; }; /* * sctp_sndrcvinfo structure specifies SCTP options for sendmsg() and * describes SCTP header information about a received message through * recvmsg(). */ struct sctp_sndrcvinfo { uint16_t sinfo_stream; uint16_t sinfo_ssn; uint16_t sinfo_flags; uint32_t sinfo_ppid; uint32_t sinfo_context; uint32_t sinfo_timetolive; uint32_t sinfo_tsn; uint32_t sinfo_cumtsn; sctp_assoc_t sinfo_assoc_id; }; /* sinfo_flags */ #define MSG_UNORDERED 0x01 /* Unordered data */ #define MSG_ABORT 0x02 /* Abort the connection */ #define MSG_EOF 0x04 /* Shutdown the connection */ /* * Use destination addr passed as parameter, not the association primary one. */ #define MSG_ADDR_OVER 0x08 /* * This flag when set in sinfo_flags is used alongwith sinfo_timetolive to * implement the "timed reliability" service discussed in RFC 3758. */ #define MSG_PR_SCTP 0x10 /* * SCTP notification definitions */ /* * To receive any ancillary data or notifications, the application can * register it's interest by calling the SCTP_EVENTS setsockopt() with * the sctp_event_subscribe structure. */ struct sctp_event_subscribe { uint8_t sctp_data_io_event; uint8_t sctp_association_event; uint8_t sctp_address_event; uint8_t sctp_send_failure_event; uint8_t sctp_peer_error_event; uint8_t sctp_shutdown_event; uint8_t sctp_partial_delivery_event; uint8_t sctp_adaptation_layer_event; }; /* Association events used in sctp_assoc_change structure */ #define SCTP_COMM_UP 0 #define SCTP_COMM_LOST 1 #define SCTP_RESTART 2 #define SCTP_SHUTDOWN_COMP 3 #define SCTP_CANT_STR_ASSOC 4 /* * Association flags. This flags is filled in the sac_flags for a SCTP_COMM_UP * event if the association supports PR-SCTP. */ #define SCTP_PRSCTP_CAPABLE 0x01 /* * sctp_assoc_change notification informs the socket that an SCTP association * has either begun or ended. The identifier for a new association is * provided by this notification. */ struct sctp_assoc_change { uint16_t sac_type; uint16_t sac_flags; uint32_t sac_length; uint16_t sac_state; uint16_t sac_error; uint16_t sac_outbound_streams; uint16_t sac_inbound_streams; sctp_assoc_t sac_assoc_id; /* * The assoc ID can be followed by the ABORT chunk if available. */ }; /* * A remote peer may send an Operational Error message to its peer. This * message indicates a variety of error conditions on an association. * The entire ERROR chunk as it appears on the wire is included in a * SCTP_REMOTE_ERROR event. Refer to the SCTP specification RFC2960 * and any extensions for a list of possible error formats. */ struct sctp_remote_error { uint16_t sre_type; uint16_t sre_flags; uint32_t sre_length; uint16_t sre_error; sctp_assoc_t sre_assoc_id; /* * The assoc ID is followed by the actual error chunk. */ }; /* * Note: * * In order to keep the offsets and size of the structure having a * struct sockaddr_storage field the same between a 32-bit application * and a 64-bit amd64 kernel, we use a #pragma pack(4) for those * structures. */ #if _LONG_LONG_ALIGNMENT == 8 && _LONG_LONG_ALIGNMENT_32 == 4 #pragma pack(4) #endif /* Address change event state */ #define SCTP_ADDR_AVAILABLE 0 #define SCTP_ADDR_UNREACHABLE 1 #define SCTP_ADDR_REMOVED 2 #define SCTP_ADDR_ADDED 3 #define SCTP_ADDR_MADE_PRIM 4 /* * When a destination address on a multi-homed peer encounters a change, * an interface details event, sctp_paddr_change, is sent to the socket. */ struct sctp_paddr_change { uint16_t spc_type; uint16_t spc_flags; uint32_t spc_length; struct sockaddr_storage spc_aaddr; int spc_state; int spc_error; sctp_assoc_t spc_assoc_id; }; #if _LONG_LONG_ALIGNMENT == 8 && _LONG_LONG_ALIGNMENT_32 == 4 #pragma pack() #endif /* flags used in sctp_send_failed notification. */ #define SCTP_DATA_UNSENT 1 #define SCTP_DATA_SENT 2 /* * If SCTP cannot deliver a message it may return the message as a * notification using the following structure. */ struct sctp_send_failed { uint16_t ssf_type; uint16_t ssf_flags; uint32_t ssf_length; uint32_t ssf_error; struct sctp_sndrcvinfo ssf_info; sctp_assoc_t ssf_assoc_id; /* * The assoc ID is followed by the failed message. */ }; /* * When a peer sends a SHUTDOWN, SCTP delivers the sctp_shutdown_event * notification to inform the socket user that it should cease sending data. */ struct sctp_shutdown_event { uint16_t sse_type; uint16_t sse_flags; uint16_t sse_length; sctp_assoc_t sse_assoc_id; }; /* * When a peer sends an Adaptation Layer Indication parameter, SCTP * delivers the sctp_adaptation_event notification to inform the socket * user the peer's requested adaptation layer. */ struct sctp_adaptation_event { uint16_t sai_type; uint16_t sai_flags; uint32_t sai_length; uint32_t sai_adaptation_ind; sctp_assoc_t sai_assoc_id; }; /* Possible values in pdapi_indication for sctp_pdapi_event notification. */ #define SCTP_PARTIAL_DELIVERY_ABORTED 1 /* * When a receiver is engaged in a partial delivery of a message the * sctp_pdapi_event notification is used to indicate various events. */ struct sctp_pdapi_event { uint16_t pdapi_type; uint16_t pdapi_flags; uint32_t pdapi_length; uint32_t pdapi_indication; sctp_assoc_t pdapi_assoc_id; }; /* * The sctp_notification structure is defined as the union of all * notification types defined above. */ union sctp_notification { struct { uint16_t sn_type; /* Notification type. */ uint16_t sn_flags; uint32_t sn_length; } sn_header; struct sctp_assoc_change sn_assoc_change; struct sctp_paddr_change sn_paddr_change; struct sctp_remote_error sn_remote_error; struct sctp_send_failed sn_send_failed; struct sctp_shutdown_event sn_shutdown_event; struct sctp_adaptation_event sn_adaptation_event; struct sctp_pdapi_event sn_pdapi_event; }; /* * sctp_opt_info() option definitions */ /* * The protocol parameters used to initialize and bound retransmission * timeout (RTO) are tunable. See RFC2960 for more information on * how these parameters are used in RTO calculation. * * The sctp_rtoinfo structure is used to access and modify these * parameters. */ struct sctp_rtoinfo { sctp_assoc_t srto_assoc_id; uint32_t srto_initial; uint32_t srto_max; uint32_t srto_min; }; /* * The sctp_assocparams option is used to both examine and set various * association and endpoint parameters. See RFC2960 for more information * on how this parameter is used. The peer address parameter is ignored * for one-to-one style socket. */ struct sctp_assocparams { sctp_assoc_t sasoc_assoc_id; uint16_t sasoc_asocmaxrxt; uint16_t sasoc_number_peer_destinations; uint32_t sasoc_peer_rwnd; uint32_t sasoc_local_rwnd; uint32_t sasoc_cookie_life; }; #if _LONG_LONG_ALIGNMENT == 8 && _LONG_LONG_ALIGNMENT_32 == 4 #pragma pack(4) #endif /* sctp_paddrinfo reachability state. */ #define SCTP_INACTIVE 1 #define SCTP_ACTIVE 2 /* * Applications can retrieve information about a specific peer address * of an association, including its reachability state, congestion * window, and retransmission timer values. This information is * read-only. The sctp_paddrinfo structure is used to access this * information: */ struct sctp_paddrinfo { sctp_assoc_t spinfo_assoc_id; struct sockaddr_storage spinfo_address; int32_t spinfo_state; uint32_t spinfo_cwnd; uint32_t spinfo_srtt; uint32_t spinfo_rto; uint32_t spinfo_mtu; }; /* * Applications can enable or disable heartbeats for any peer address of * an association, modify an address's heartbeat interval, force a * heartbeat to be sent immediately, and adjust the address's maximum * number of retransmissions sent before an address is considered * unreachable. The sctp_paddrparams structure is used to access and modify * an address' parameters. */ struct sctp_paddrparams { sctp_assoc_t spp_assoc_id; struct sockaddr_storage spp_address; uint32_t spp_hbinterval; uint16_t spp_pathmaxrxt; }; /* * A socket user can request that the peer mark the enclosed address as the * association's primary. The enclosed address must be one of the * association's locally bound addresses. The sctp_setpeerprim structure is * used to make such request. */ struct sctp_setpeerprim { sctp_assoc_t sspp_assoc_id; struct sockaddr_storage sspp_addr; }; /* * A socket user can request that the local SCTP stack use the enclosed peer * address as the association primary. The enclosed address must be one of * the association peer's addresses. The sctp_setprim structure is used to * make such request. */ struct sctp_setprim { sctp_assoc_t ssp_assoc_id; struct sockaddr_storage ssp_addr; }; #if _LONG_LONG_ALIGNMENT == 8 && _LONG_LONG_ALIGNMENT_32 == 4 #pragma pack() #endif /* SCTP association states */ #define SCTPS_IDLE -5 /* idle (opened, but not bound) */ #define SCTPS_BOUND -4 /* bound, ready to connect or accept */ #define SCTPS_LISTEN -3 /* listening for connection */ #define SCTPS_COOKIE_WAIT -2 #define SCTPS_COOKIE_ECHOED -1 /* states < SCTPS_ESTABLISHED are those where connections not established */ #define SCTPS_ESTABLISHED 0 /* established */ #define SCTPS_SHUTDOWN_PENDING 1 #define SCTPS_SHUTDOWN_SENT 2 #define SCTPS_SHUTDOWN_RECEIVED 3 #define SCTPS_SHUTDOWN_ACK_SENT 4 /* * Applications can retrieve current status information about an * association, including association state, peer receiver window size, * number of unacked data chunks, and number of data chunks pending * receipt. This information is read-only. The sctp_status structure is * used to access this information: */ struct sctp_status { sctp_assoc_t sstat_assoc_id; int32_t sstat_state; uint32_t sstat_rwnd; uint16_t sstat_unackdata; uint16_t sstat_penddata; uint16_t sstat_instrms; uint16_t sstat_outstrms; uint32_t sstat_fragmentation_point; struct sctp_paddrinfo sstat_primary; }; /* Possible values for sstat_state */ #define SCTP_CLOSED SCTPS_IDLE #define SCTP_BOUND SCTPS_BOUND #define SCTP_LISTEN SCTPS_LISTEN #define SCTP_COOKIE_WAIT SCTPS_COOKIE_WAIT #define SCTP_COOKIE_ECHOED SCTPS_COOKIE_ECHOED #define SCTP_ESTABLISHED SCTPS_ESTABLISHED #define SCTP_SHUTDOWN_PENDING SCTPS_SHUTDOWN_PENDING #define SCTP_SHUTDOWN_SENT SCTPS_SHUTDOWN_SENT #define SCTP_SHUTDOWN_RECEIVED SCTPS_SHUTDOWN_RECEIVED #define SCTP_SHUTDOWN_ACK_SENT SCTPS_SHUTDOWN_ACK_SENT /* * A socket user can request that the local endpoint set the specified * Adaptation Layer Indication parameter for all future INIT and INIT-ACK * exchanges. The sctp_setadaptation structure is used to make such request. */ struct sctp_setadaptation { uint32_t ssb_adaptation_ind; }; /* * Private ioctl option structure */ struct sctpopt { sctp_assoc_t sopt_aid; int sopt_name; uint_t sopt_len; caddr_t sopt_val; }; #if defined(_SYSCALL32) struct sctpopt32 { sctp_assoc32_t sopt_aid; int32_t sopt_name; uint32_t sopt_len; caddr32_t sopt_val; }; #endif /* _SYSCALL32 */ /* Forward Cumulative TSN chunk entry. */ typedef struct ftsn_entry_s { uint16_t ftsn_sid; uint16_t ftsn_ssn; } ftsn_entry_t; /* * New socket functions for SCTP */ /* sctp_bindx() operations. */ #define SCTP_BINDX_ADD_ADDR 1 #define SCTP_BINDX_REM_ADDR 2 #if !defined(_KERNEL) || defined(_BOOT) #ifdef __STDC__ extern int sctp_bindx(int, void *, int, int); extern void sctp_freeladdrs(void *); extern void sctp_freepaddrs(void *); extern int sctp_getladdrs(int, sctp_assoc_t, void **); extern int sctp_getpaddrs(int, sctp_assoc_t, void **); extern int sctp_opt_info(int, sctp_assoc_t, int, void *, socklen_t *); extern int sctp_peeloff(int, sctp_assoc_t); extern ssize_t sctp_recvmsg(int, void *, size_t, struct sockaddr *, socklen_t *, struct sctp_sndrcvinfo *, int *msg_flags); extern ssize_t sctp_send(int, const void *, size_t, const struct sctp_sndrcvinfo *, int); extern ssize_t sctp_sendmsg(int, const void *, size_t, const struct sockaddr *, socklen_t, uint32_t, uint32_t, uint16_t, uint32_t, uint32_t); #else /* __STDC__ */ extern int sctp_bindx(); extern void sctp_freeladdrs(); extern void sctp_freepaddrs(); extern int sctp_getladdrs(); extern int sctp_getpaddrs(); extern int sctp_opt_info(); extern int sctp_peeloff(); extern ssize_t sctp_recvmsg(); extern ssize_t sctp_send(); extern ssize_t sctp_sendmsg(); #endif /* __STDC__ */ #endif /* !defined(_KERNEL) || defined(_BOOT) */ /* * SCTP protocol related elements. */ /* All SCTP chunks and parameters are 32-bit aligned */ #define SCTP_ALIGN 4 /* * SCTP association optional parameter handling. The top two bits * of the parameter type define how this and further parameters in * the received chunk should be handled. */ #define SCTP_UNREC_PARAM_MASK 0xc000 /* Continue processing parameters after an unrecognized optional param? */ #define SCTP_CONT_PROC_PARAMS 0x8000 /* Report this unreconized optional parameter or silently ignore it? */ #define SCTP_REPORT_THIS_PARAM 0x4000 /* * Data chunk bit manipulations */ #define SCTP_DATA_EBIT 0x01 #define SCTP_TBIT 0x01 #define SCTP_DATA_BBIT 0x02 #define SCTP_DATA_UBIT 0x04 #define SCTP_DATA_GET_BBIT(sdc) ((sdc)->sdh_flags & SCTP_DATA_BBIT) #define SCTP_GET_TBIT(cp) ((cp)->sch_flags & SCTP_TBIT) #define SCTP_DATA_GET_EBIT(sdc) ((sdc)->sdh_flags & SCTP_DATA_EBIT) #define SCTP_DATA_GET_UBIT(sdc) ((sdc)->sdh_flags & SCTP_DATA_UBIT) #define SCTP_DATA_SET_BBIT(sdc) ((sdc)->sdh_flags |= SCTP_DATA_BBIT) #define SCTP_SET_TBIT(cp) ((cp)->sch_flags |= SCTP_TBIT) #define SCTP_DATA_SET_EBIT(sdc) ((sdc)->sdh_flags |= SCTP_DATA_EBIT) #define SCTP_DATA_SET_UBIT(sdc) ((sdc)->sdh_flags |= SCTP_DATA_UBIT) /* SCTP common header */ typedef struct sctp_hdr { uint16_t sh_sport; uint16_t sh_dport; uint32_t sh_verf; uint32_t sh_chksum; } sctp_hdr_t; /* Chunk IDs */ typedef enum { CHUNK_DATA, CHUNK_INIT, CHUNK_INIT_ACK, CHUNK_SACK, CHUNK_HEARTBEAT, CHUNK_HEARTBEAT_ACK, CHUNK_ABORT, CHUNK_SHUTDOWN, CHUNK_SHUTDOWN_ACK, CHUNK_ERROR, CHUNK_COOKIE, CHUNK_COOKIE_ACK, CHUNK_ECNE, CHUNK_CWR, CHUNK_SHUTDOWN_COMPLETE, CHUNK_ASCONF_ACK = 128, CHUNK_FORWARD_TSN = 192, CHUNK_ASCONF = 193 } sctp_chunk_id_t; /* Common chunk header */ typedef struct sctp_chunk_hdr { uint8_t sch_id; uint8_t sch_flags; uint16_t sch_len; } sctp_chunk_hdr_t; /* INIT chunk data definition */ typedef struct sctp_init_chunk { uint32_t sic_inittag; uint32_t sic_a_rwnd; uint16_t sic_outstr; uint16_t sic_instr; uint32_t sic_inittsn; } sctp_init_chunk_t; /* SCTP DATA chunk */ typedef struct sctp_data_chunk { uint32_t sdc_tsn; uint16_t sdc_sid; uint16_t sdc_ssn; uint32_t sdc_payload_id; } sctp_data_chunk_t; /* sctp_data_hdr includes the SCTP chunk hdr and the DATA chunk */ typedef struct sctp_data_hdr { sctp_chunk_hdr_t sdh_chdr; sctp_data_chunk_t sdh_data; #define sdh_id sdh_chdr.sch_id #define sdh_flags sdh_chdr.sch_flags #define sdh_len sdh_chdr.sch_len #define sdh_tsn sdh_data.sdc_tsn #define sdh_sid sdh_data.sdc_sid #define sdh_ssn sdh_data.sdc_ssn #define sdh_payload_id sdh_data.sdc_payload_id } sctp_data_hdr_t; typedef struct sctp_sack_chunk { uint32_t ssc_cumtsn; uint32_t ssc_a_rwnd; uint16_t ssc_numfrags; uint16_t ssc_numdups; } sctp_sack_chunk_t; typedef struct sctp_sack_frag { uint16_t ssf_start; uint16_t ssf_end; } sctp_sack_frag_t; /* Parameter types */ #define PARM_UNKNOWN 0 #define PARM_HBINFO 1 #define PARM_ADDR4 5 #define PARM_ADDR6 6 #define PARM_COOKIE 7 #define PARM_UNRECOGNIZED 8 #define PARM_COOKIE_PRESERVE 9 #define PARM_ADDR_HOST_NAME 11 #define PARM_SUPP_ADDRS 12 #define PARM_ECN 0x8000 #define PARM_ECN_CAPABLE PARM_ECN #define PARM_FORWARD_TSN 0xc000 #define PARM_ADD_IP 0xc001 #define PARM_DEL_IP 0xc002 #define PARM_ERROR_IND 0xc003 #define PARM_ASCONF_ERROR PARM_ERROR_IND #define PARM_SET_PRIMARY 0xc004 #define PARM_PRIMARY_ADDR PARM_SET_PRIMARY #define PARM_SUCCESS 0xc005 #define PARM_ASCONF_SUCCESS PARM_SUCCESS #define PARM_ADAPT_LAYER_IND 0xc006 /* Lengths from SCTP spec */ #define PARM_ADDR4_LEN 8 #define PARM_ADDR6_LEN 20 /* Parameter header */ typedef struct sctp_parm_hdr { uint16_t sph_type; uint16_t sph_len; } sctp_parm_hdr_t; /* * The following extend sctp_parm_hdr_t * with cause-specfic content used to fill * CAUSE blocks in ABORT or ERROR chunks. * The overall size of the CAUSE block will * be sizeof (sctp_parm_hdr_t) plus the size * of the extended cause structure, */ /* * Invalid stream-identifier extended cause. * SCTP_ERR_BAD_SID */ typedef struct sctp_bsc { uint16_t bsc_sid; uint16_t bsc_pad; /* RESV = 0 */ } sctp_bsc_t; /* * Missing parameter extended cause, currently * only one missing parameter is supported. * SCTP_ERR_MISSING_PARM */ typedef struct sctp_mpc { uint32_t mpc_num; uint16_t mpc_param; uint16_t mpc_pad; } sctp_mpc_t; /* Error causes */ #define SCTP_ERR_UNKNOWN 0 #define SCTP_ERR_BAD_SID 1 #define SCTP_ERR_MISSING_PARM 2 #define SCTP_ERR_STALE_COOKIE 3 #define SCTP_ERR_NO_RESOURCES 4 #define SCTP_ERR_BAD_ADDR 5 #define SCTP_ERR_UNREC_CHUNK 6 #define SCTP_ERR_BAD_MANDPARM 7 #define SCTP_ERR_UNREC_PARM 8 #define SCTP_ERR_NO_USR_DATA 9 #define SCTP_ERR_COOKIE_SHUT 10 #define SCTP_ERR_RESTART_NEW_ADDRS 11 #define SCTP_ERR_USER_ABORT 12 #define SCTP_ERR_DELETE_LASTADDR 256 #define SCTP_ERR_RESOURCE_SHORTAGE 257 #define SCTP_ERR_DELETE_SRCADDR 258 #define SCTP_ERR_AUTH_ERR 260 /* * Extensions */ /* Extended Chunk Types */ #define CHUNK_ASCONF 0xc1 #define CHUNK_ASCONF_ACK 0x80 /* Extension Error Causes */ #define SCTP_ERR_DEL_LAST_ADDR 0x0100 #define SCTP_ERR_RES_SHORTAGE 0x0101 #define SCTP_ERR_DEL_SRC_ADDR 0x0102 #define SCTP_ERR_ILLEGAL_ACK 0x0103 #define SCTP_ERR_UNAUTHORIZED 0x0104 typedef struct sctp_addip4 { sctp_parm_hdr_t sad4_addip_ph; uint32_t asconf_req_cid; sctp_parm_hdr_t sad4_addr4_ph; ipaddr_t sad4_addr; } sctp_addip4_t; typedef struct sctp_addip6 { sctp_parm_hdr_t sad6_addip_ph; uint32_t asconf_req_cid; sctp_parm_hdr_t sad6_addr6_ph; in6_addr_t sad6_addr; } sctp_addip6_t; #ifdef __cplusplus } #endif #endif /* _NETINET_SCTP_H */