/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License, Version 1.0 only * (the "License"). You may not use this file except in compliance * with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2005 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" /* * USBA: Solaris USB Architecture support * * hcdi.c contains the code for client driver callbacks. A host controller * driver registers/unregisters with usba through usba_hcdi_register/unregister. * * When the transfer has finished, the host controller driver will call into * usba with the result. The call is usba_hcdi_cb(). * * The callback queue is maintained in FIFO order. usba_hcdi_cb * adds to the queue, and hcdi_cb_thread takes the callbacks off the queue * and executes them. */ #define USBA_FRAMEWORK #include #include #include #include /* function prototypes, XXXX use hcdi_ prefix? */ static void usba_hcdi_create_stats(usba_hcdi_t *, int); static void usba_hcdi_update_error_stats(usba_hcdi_t *, usb_cr_t); static void usba_hcdi_destroy_stats(usba_hcdi_t *); /* internal functions */ static uint_t hcdi_soft_intr(caddr_t arg1, caddr_t arg2); static void hcdi_cb_thread(void *); static void hcdi_shared_cb_thread(void *); static void hcdi_do_cb(usba_pipe_handle_data_t *, usba_req_wrapper_t *, usba_hcdi_t *); static void hcdi_autoclearing(usba_req_wrapper_t *); /* private function from USBAI */ void usba_pipe_clear(usb_pipe_handle_t); /* for debug messages */ uint_t hcdi_errmask = (uint_t)DPRINT_MASK_ALL; uint_t hcdi_errlevel = USB_LOG_L4; uint_t hcdi_instance_debug = (uint_t)-1; void usba_hcdi_initialization() { } void usba_hcdi_destroy() { } /* * store hcdi structure in the dip */ void usba_hcdi_set_hcdi(dev_info_t *dip, usba_hcdi_t *hcdi) { ddi_set_driver_private(dip, hcdi); } /* * retrieve hcdi structure from the dip */ usba_hcdi_t * usba_hcdi_get_hcdi(dev_info_t *dip) { return (ddi_get_driver_private(dip)); } /* * Called by an HCD to attach an instance of the driver * make this instance known to USBA * the HCD should initialize usba_hcdi structure prior * to calling this interface */ int usba_hcdi_register(usba_hcdi_register_args_t *args, uint_t flags) { char *datap; uint_t soft_prip; usba_hcdi_t *hcdi = kmem_zalloc(sizeof (usba_hcdi_t), KM_SLEEP); if (args->usba_hcdi_register_version != HCDI_REGISTER_VERS_0) { kmem_free(hcdi, sizeof (usba_hcdi_t)); return (USB_FAILURE); } hcdi->hcdi_dip = args->usba_hcdi_register_dip; /* * Create a log_handle */ hcdi->hcdi_log_handle = usb_alloc_log_hdl(hcdi->hcdi_dip, NULL, &hcdi_errlevel, &hcdi_errmask, &hcdi_instance_debug, 0); USB_DPRINTF_L4(DPRINT_MASK_HCDI, hcdi->hcdi_log_handle, "usba_hcdi_register: %s", ddi_node_name(hcdi->hcdi_dip)); /* * Initialize the mutex. Use the iblock cookie passed in * by the host controller driver. */ mutex_init(&hcdi->hcdi_mutex, NULL, MUTEX_DRIVER, args->usba_hcdi_register_iblock_cookie); /* add soft interrupt */ if (ddi_intr_add_softint(hcdi->hcdi_dip, &hcdi->hcdi_softint_hdl, DDI_INTR_SOFTPRI_MAX, hcdi_soft_intr, (caddr_t)hcdi) != DDI_SUCCESS) { USB_DPRINTF_L2(DPRINT_MASK_HCDI, hcdi->hcdi_log_handle, "usba_hcd_register: add soft interrupt failed"); mutex_destroy(&hcdi->hcdi_mutex); usb_free_log_hdl(hcdi->hcdi_log_handle); kmem_free(hcdi, sizeof (usba_hcdi_t)); return (USB_FAILURE); } if (ddi_intr_get_softint_pri(hcdi->hcdi_softint_hdl, &soft_prip) != DDI_SUCCESS) { USB_DPRINTF_L2(DPRINT_MASK_HCDI, hcdi->hcdi_log_handle, "usba_hcd_register: get soft interrupt priority failed"); (void) ddi_intr_remove_softint(hcdi->hcdi_softint_hdl); mutex_destroy(&hcdi->hcdi_mutex); usb_free_log_hdl(hcdi->hcdi_log_handle); kmem_free(hcdi, sizeof (usba_hcdi_t)); return (USB_FAILURE); } /* * Priority and iblock_cookie are one and the same * (However, retaining hcdi_soft_iblock_cookie for now * assigning it w/ priority. In future all iblock_cookie * could just go) */ hcdi->hcdi_soft_iblock_cookie = (ddi_iblock_cookie_t)(uintptr_t)soft_prip; usba_init_list(&hcdi->hcdi_cb_queue, NULL, NULL); hcdi->hcdi_dma_attr = args->usba_hcdi_register_dma_attr; hcdi->hcdi_flags = flags; hcdi->hcdi_ops = args->usba_hcdi_register_ops; hcdi->hcdi_iblock_cookie = args->usba_hcdi_register_iblock_cookie; usba_hcdi_create_stats(hcdi, ddi_get_instance(hcdi->hcdi_dip)); hcdi->hcdi_min_xfer = hcdi->hcdi_dma_attr->dma_attr_minxfer; hcdi->hcdi_min_burst_size = (1<<(ddi_ffs(hcdi->hcdi_dma_attr->dma_attr_burstsizes)-1)); hcdi->hcdi_max_burst_size = (1<<(ddi_fls(hcdi->hcdi_dma_attr->dma_attr_burstsizes)-1)); usba_hcdi_set_hcdi(hcdi->hcdi_dip, hcdi); if (ddi_prop_lookup_string(DDI_DEV_T_ANY, hcdi->hcdi_dip, DDI_PROP_DONTPASS, "ugen-default-binding", &datap) == DDI_PROP_SUCCESS) { if (strcmp(datap, "device") == 0) { hcdi->hcdi_ugen_default_binding = USBA_UGEN_DEVICE_BINDING; } else if (strcmp(datap, "interface") == 0) { hcdi->hcdi_ugen_default_binding = USBA_UGEN_INTERFACE_BINDING; } else { USB_DPRINTF_L1(DPRINT_MASK_HCDI, hcdi->hcdi_log_handle, "illegal value (%s) for " "ugen_default_binding property", datap); } ddi_prop_free(datap); } return (USB_SUCCESS); } /* * Called by an HCD to detach an instance of the driver */ /*ARGSUSED*/ void usba_hcdi_unregister(dev_info_t *dip) { usba_hcdi_t *hcdi = usba_hcdi_get_hcdi(dip); if (hcdi) { USB_DPRINTF_L4(DPRINT_MASK_HCDI, hcdi->hcdi_log_handle, "usba_hcdi_unregister: %s", ddi_node_name(dip)); usba_hcdi_set_hcdi(dip, NULL); mutex_destroy(&hcdi->hcdi_mutex); usba_hcdi_destroy_stats(hcdi); usb_free_log_hdl(hcdi->hcdi_log_handle); /* Destroy the soft interrupt */ (void) ddi_intr_remove_softint(hcdi->hcdi_softint_hdl); kmem_free(hcdi, sizeof (usba_hcdi_t)); } } /* * alloc usba_hcdi_ops structure * called from the HCD attach routine */ usba_hcdi_ops_t * usba_alloc_hcdi_ops() { usba_hcdi_ops_t *usba_hcdi_ops; usba_hcdi_ops = kmem_zalloc(sizeof (usba_hcdi_ops_t), KM_SLEEP); return (usba_hcdi_ops); } /* * dealloc usba_hcdi_ops structure */ void usba_free_hcdi_ops(usba_hcdi_ops_t *hcdi_ops) { if (hcdi_ops) { kmem_free(hcdi_ops, sizeof (usba_hcdi_ops_t)); } } /* * Allocate the hotplug kstats structure */ void usba_hcdi_create_stats(usba_hcdi_t *hcdi, int instance) { char kstatname[KSTAT_STRLEN]; const char *dname = ddi_driver_name(hcdi->hcdi_dip); hcdi_hotplug_stats_t *hsp; hcdi_error_stats_t *esp; if (HCDI_HOTPLUG_STATS(hcdi) == NULL) { (void) snprintf(kstatname, KSTAT_STRLEN, "%s%d,hotplug", dname, instance); HCDI_HOTPLUG_STATS(hcdi) = kstat_create("usba", instance, kstatname, "usb_hotplug", KSTAT_TYPE_NAMED, sizeof (hcdi_hotplug_stats_t) / sizeof (kstat_named_t), KSTAT_FLAG_PERSISTENT); if (HCDI_HOTPLUG_STATS(hcdi) == NULL) { return; } hsp = HCDI_HOTPLUG_STATS_DATA(hcdi); kstat_named_init(&hsp->hcdi_hotplug_total_success, "Total Hotplug Successes", KSTAT_DATA_UINT64); kstat_named_init(&hsp->hcdi_hotplug_success, "Hotplug Successes", KSTAT_DATA_UINT64); kstat_named_init(&hsp->hcdi_hotplug_total_failure, "Hotplug Total Failures", KSTAT_DATA_UINT64); kstat_named_init(&hsp->hcdi_hotplug_failure, "Hotplug Failures", KSTAT_DATA_UINT64); kstat_named_init(&hsp->hcdi_device_count, "Device Count", KSTAT_DATA_UINT64); HCDI_HOTPLUG_STATS(hcdi)->ks_private = hcdi; HCDI_HOTPLUG_STATS(hcdi)->ks_update = nulldev; kstat_install(HCDI_HOTPLUG_STATS(hcdi)); } if (HCDI_ERROR_STATS(hcdi) == NULL) { (void) snprintf(kstatname, KSTAT_STRLEN, "%s%d,error", dname, instance); HCDI_ERROR_STATS(hcdi) = kstat_create("usba", instance, kstatname, "usb_errors", KSTAT_TYPE_NAMED, sizeof (hcdi_error_stats_t) / sizeof (kstat_named_t), KSTAT_FLAG_PERSISTENT); if (HCDI_ERROR_STATS(hcdi) == NULL) { return; } esp = HCDI_ERROR_STATS_DATA(hcdi); kstat_named_init(&esp->cc_crc, "CRC Errors", KSTAT_DATA_UINT64); kstat_named_init(&esp->cc_bitstuffing, "Bit Stuffing Violations", KSTAT_DATA_UINT64); kstat_named_init(&esp->cc_data_toggle_mm, "Data Toggle PID Errors", KSTAT_DATA_UINT64); kstat_named_init(&esp->cc_stall, "Endpoint Stalls", KSTAT_DATA_UINT64); kstat_named_init(&esp->cc_dev_not_resp, "Device Not Responding", KSTAT_DATA_UINT64); kstat_named_init(&esp->cc_pid_checkfailure, "PID Check Bit Errors", KSTAT_DATA_UINT64); kstat_named_init(&esp->cc_unexp_pid, "Invalid PID Errors", KSTAT_DATA_UINT64); kstat_named_init(&esp->cc_data_overrun, "Data Overruns", KSTAT_DATA_UINT64); kstat_named_init(&esp->cc_data_underrun, "Data Underruns", KSTAT_DATA_UINT64); kstat_named_init(&esp->cc_buffer_overrun, "Buffer Overruns", KSTAT_DATA_UINT64); kstat_named_init(&esp->cc_buffer_underrun, "Buffer Underruns", KSTAT_DATA_UINT64); kstat_named_init(&esp->cc_timeout, "Command Timed Out", KSTAT_DATA_UINT64); kstat_named_init(&esp->cc_not_accessed, "Not Accessed By Hardware", KSTAT_DATA_UINT64); kstat_named_init(&esp->cc_unspecified_err, "Unspecified Error", KSTAT_DATA_UINT64); #ifdef NOTYETNEEDED kstat_named_init(&esp->hcdi_usb_failure, "USB Failure", KSTAT_DATA_UINT64); kstat_named_init(&esp->hcdi_usb_no_resources, "No Resources", KSTAT_DATA_UINT64); kstat_named_init(&esp->hcdi_usb_no_bandwidth, "No Bandwidth", KSTAT_DATA_UINT64); kstat_named_init(&esp->hcdi_usb_pipe_reserved, "Pipe Reserved", KSTAT_DATA_UINT64); kstat_named_init(&esp->hcdi_usb_pipe_unshareable, "Pipe Unshareable", KSTAT_DATA_UINT64); kstat_named_init(&esp->hcdi_usb_not_supported, "Function Not Supported", KSTAT_DATA_UINT64); kstat_named_init(&esp->hcdi_usb_pipe_error, "Pipe Error", KSTAT_DATA_UINT64); kstat_named_init(&esp->hcdi_usb_pipe_busy, "Pipe Busy", KSTAT_DATA_UINT64); #endif HCDI_ERROR_STATS(hcdi)->ks_private = hcdi; HCDI_ERROR_STATS(hcdi)->ks_update = nulldev; kstat_install(HCDI_ERROR_STATS(hcdi)); } } /* * Do actual error stats */ void usba_hcdi_update_error_stats(usba_hcdi_t *hcdi, usb_cr_t completion_reason) { if (HCDI_ERROR_STATS(hcdi) == NULL) { return; } switch (completion_reason) { case USB_CR_OK: break; case USB_CR_CRC: HCDI_ERROR_STATS_DATA(hcdi)->cc_crc.value.ui64++; break; case USB_CR_BITSTUFFING: HCDI_ERROR_STATS_DATA(hcdi)->cc_bitstuffing.value.ui64++; break; case USB_CR_DATA_TOGGLE_MM: HCDI_ERROR_STATS_DATA(hcdi)->cc_data_toggle_mm.value.ui64++; break; case USB_CR_STALL: HCDI_ERROR_STATS_DATA(hcdi)->cc_stall.value.ui64++; break; case USB_CR_DEV_NOT_RESP: HCDI_ERROR_STATS_DATA(hcdi)->cc_dev_not_resp.value.ui64++; break; case USB_CR_PID_CHECKFAILURE: HCDI_ERROR_STATS_DATA(hcdi)->cc_pid_checkfailure.value.ui64++; break; case USB_CR_UNEXP_PID: HCDI_ERROR_STATS_DATA(hcdi)->cc_unexp_pid.value.ui64++; break; case USB_CR_DATA_OVERRUN: HCDI_ERROR_STATS_DATA(hcdi)->cc_data_overrun.value.ui64++; break; case USB_CR_DATA_UNDERRUN: HCDI_ERROR_STATS_DATA(hcdi)->cc_data_underrun.value.ui64++; break; case USB_CR_BUFFER_OVERRUN: HCDI_ERROR_STATS_DATA(hcdi)->cc_buffer_overrun.value.ui64++; break; case USB_CR_BUFFER_UNDERRUN: HCDI_ERROR_STATS_DATA(hcdi)->cc_buffer_underrun.value.ui64++; break; case USB_CR_TIMEOUT: HCDI_ERROR_STATS_DATA(hcdi)->cc_timeout.value.ui64++; break; case USB_CR_NOT_ACCESSED: HCDI_ERROR_STATS_DATA(hcdi)->cc_not_accessed.value.ui64++; break; case USB_CR_NO_RESOURCES: HCDI_ERROR_STATS_DATA(hcdi)->cc_no_resources.value.ui64++; break; case USB_CR_UNSPECIFIED_ERR: HCDI_ERROR_STATS_DATA(hcdi)->cc_unspecified_err.value.ui64++; break; case USB_CR_STOPPED_POLLING: HCDI_ERROR_STATS_DATA(hcdi)->cc_stopped_polling.value.ui64++; break; case USB_CR_PIPE_CLOSING: HCDI_ERROR_STATS_DATA(hcdi)->cc_pipe_closing.value.ui64++; break; case USB_CR_PIPE_RESET: HCDI_ERROR_STATS_DATA(hcdi)->cc_pipe_reset.value.ui64++; break; case USB_CR_NOT_SUPPORTED: HCDI_ERROR_STATS_DATA(hcdi)->cc_not_supported.value.ui64++; break; case USB_CR_FLUSHED: HCDI_ERROR_STATS_DATA(hcdi)->cc_flushed.value.ui64++; break; default: break; } } /* * Destroy the hotplug kstats structure */ static void usba_hcdi_destroy_stats(usba_hcdi_t *hcdi) { if (HCDI_HOTPLUG_STATS(hcdi)) { kstat_delete(HCDI_HOTPLUG_STATS(hcdi)); HCDI_HOTPLUG_STATS(hcdi) = NULL; } if (HCDI_ERROR_STATS(hcdi)) { kstat_delete(HCDI_ERROR_STATS(hcdi)); HCDI_ERROR_STATS(hcdi) = NULL; } } /* * HCD callback handling */ void usba_hcdi_cb(usba_pipe_handle_data_t *ph_data, usb_opaque_t req, usb_cr_t completion_reason) { usba_device_t *usba_device = ph_data->p_usba_device; usba_hcdi_t *hcdi = usba_hcdi_get_hcdi( usba_device->usb_root_hub_dip); usba_req_wrapper_t *req_wrp = USBA_REQ2WRP(req); usb_ep_descr_t *eptd = &ph_data->p_ep; mutex_enter(&ph_data->p_mutex); #ifdef DEBUG mutex_enter(&ph_data->p_ph_impl->usba_ph_mutex); USB_DPRINTF_L4(DPRINT_MASK_HCDI, hcdi->hcdi_log_handle, "usba_hcdi_cb: " "ph_data=0x%p req=0x%p state=%d ref=%d cnt=%d cr=%d", ph_data, req, ph_data->p_ph_impl->usba_ph_state, ph_data->p_ph_impl->usba_ph_ref_count, ph_data->p_req_count, completion_reason); mutex_exit(&ph_data->p_ph_impl->usba_ph_mutex); #endif /* Set the completion reason */ switch (eptd->bmAttributes & USB_EP_ATTR_MASK) { case USB_EP_ATTR_CONTROL: ((usb_ctrl_req_t *)req)-> ctrl_completion_reason = completion_reason; break; case USB_EP_ATTR_BULK: ((usb_bulk_req_t *)req)-> bulk_completion_reason = completion_reason; break; case USB_EP_ATTR_INTR: ((usb_intr_req_t *)req)-> intr_completion_reason = completion_reason; break; case USB_EP_ATTR_ISOCH: ((usb_isoc_req_t *)req)-> isoc_completion_reason = completion_reason; break; } /* * exception callbacks will still go thru a taskq thread * but should occur after the soft interrupt callback * By design of periodic pipes, polling will stop on any * exception */ if ((ph_data->p_spec_flag & USBA_PH_FLAG_USE_SOFT_INTR) && (completion_reason == USB_CR_OK)) { ph_data->p_soft_intr++; mutex_exit(&ph_data->p_mutex); usba_add_to_list(&hcdi->hcdi_cb_queue, &req_wrp->wr_queue); if (ddi_intr_trigger_softint(hcdi->hcdi_softint_hdl, NULL) != DDI_SUCCESS) USB_DPRINTF_L2(DPRINT_MASK_HCDI, hcdi->hcdi_log_handle, "usba_hcdi_cb: ddi_intr_trigger_softint failed"); return; } /* * USBA_PH_FLAG_TQ_SHARE is for bulk and intr requests, * USBA_PH_FLAG_USE_SOFT_INTR is only for isoch, * so there are no conflicts. */ if (ph_data->p_spec_flag & USBA_PH_FLAG_TQ_SHARE) { int iface; mutex_exit(&ph_data->p_mutex); iface = usb_get_if_number(ph_data->p_dip); if (iface < 0) { /* we own the device, use the first taskq */ iface = 0; } if (taskq_dispatch(usba_device->usb_shared_taskq[iface], hcdi_shared_cb_thread, req_wrp, TQ_NOSLEEP) == NULL) { usba_req_exc_cb(req_wrp, USB_CR_NO_RESOURCES, USB_CB_ASYNC_REQ_FAILED); } return; } /* Add the callback to the pipehandles callback list */ usba_add_to_list(&ph_data->p_cb_queue, &req_wrp->wr_queue); /* only dispatch if there is no thread running */ if (ph_data->p_thread_id == 0) { if (usba_async_ph_req(ph_data, hcdi_cb_thread, ph_data, USB_FLAGS_NOSLEEP) != USB_SUCCESS) { USB_DPRINTF_L2(DPRINT_MASK_HCDI, hcdi->hcdi_log_handle, "usba_hcdi_cb: taskq_dispatch failed"); if (usba_rm_from_list(&ph_data->p_cb_queue, &req_wrp->wr_queue) == USB_SUCCESS) { mutex_exit(&ph_data->p_mutex); usba_req_exc_cb(req_wrp, USB_CR_NO_RESOURCES, USB_CB_ASYNC_REQ_FAILED); return; } } else { ph_data->p_thread_id = (kthread_t *)1; } } mutex_exit(&ph_data->p_mutex); } /* * thread to perform the callbacks */ static void hcdi_cb_thread(void *arg) { usba_pipe_handle_data_t *ph_data = (usba_pipe_handle_data_t *)arg; usba_ph_impl_t *ph_impl = ph_data->p_ph_impl; usba_hcdi_t *hcdi = usba_hcdi_get_hcdi(ph_data-> p_usba_device->usb_root_hub_dip); usba_req_wrapper_t *req_wrp; mutex_enter(&ph_data->p_mutex); ASSERT(ph_data->p_thread_id == (kthread_t *)1); ph_data->p_thread_id = curthread; /* * hold the ph_data. we can't use usba_hold_ph_data() since * it will return NULL if we are closing the pipe which would * then leave all requests stuck in the cb_queue */ mutex_enter(&ph_impl->usba_ph_mutex); ph_impl->usba_ph_ref_count++; USB_DPRINTF_L4(DPRINT_MASK_HCDI, hcdi->hcdi_log_handle, "hcdi_cb_thread: ph_data=0x%p ref=%d", ph_data, ph_impl->usba_ph_ref_count); mutex_exit(&ph_impl->usba_ph_mutex); /* * wait till soft interrupt callbacks are taken care of */ while (ph_data->p_soft_intr) { mutex_exit(&ph_data->p_mutex); delay(1); mutex_enter(&ph_data->p_mutex); } while ((req_wrp = (usba_req_wrapper_t *) usba_rm_first_pvt_from_list(&ph_data->p_cb_queue)) != NULL) { hcdi_do_cb(ph_data, req_wrp, hcdi); } ph_data->p_thread_id = 0; mutex_exit(&ph_data->p_mutex); USB_DPRINTF_L4(DPRINT_MASK_HCDI, hcdi->hcdi_log_handle, "hcdi_cb_thread done: ph_data=0x%p", ph_data); usba_release_ph_data(ph_impl); } static void hcdi_do_cb(usba_pipe_handle_data_t *ph_data, usba_req_wrapper_t *req_wrp, usba_hcdi_t *hcdi) { usb_cr_t completion_reason; usb_req_attrs_t attrs = req_wrp->wr_attrs; switch (req_wrp->wr_ph_data->p_ep.bmAttributes & USB_EP_ATTR_MASK) { case USB_EP_ATTR_CONTROL: completion_reason = USBA_WRP2CTRL_REQ(req_wrp)->ctrl_completion_reason; break; case USB_EP_ATTR_INTR: completion_reason = USBA_WRP2INTR_REQ(req_wrp)->intr_completion_reason; break; case USB_EP_ATTR_BULK: completion_reason = USBA_WRP2BULK_REQ(req_wrp)->bulk_completion_reason; break; case USB_EP_ATTR_ISOCH: completion_reason = USBA_WRP2ISOC_REQ(req_wrp)->isoc_completion_reason; break; } req_wrp->wr_cr = completion_reason; USB_DPRINTF_L4(DPRINT_MASK_HCDI, hcdi->hcdi_log_handle, "hcdi_do_cb: wrp=0x%p cr=0x%x", req_wrp, completion_reason); /* * Normal callbacks: */ if (completion_reason == USB_CR_OK) { mutex_exit(&ph_data->p_mutex); usba_req_normal_cb(req_wrp); mutex_enter(&ph_data->p_mutex); } else { usb_pipe_state_t pipe_state; USB_DPRINTF_L4(DPRINT_MASK_HCDI, hcdi->hcdi_log_handle, "exception callback handling: attrs=0x%x", attrs); /* * In exception callback handling, if we were * not able to clear stall, we need to modify * pipe state. Also if auto-clearing is not set * pipe state needs to be modified. */ pipe_state = usba_get_ph_state(ph_data); if (!USBA_PIPE_CLOSING(pipe_state)) { switch (completion_reason) { case USB_CR_STOPPED_POLLING: if (pipe_state == USB_PIPE_STATE_ACTIVE) { usba_pipe_new_state(ph_data, USB_PIPE_STATE_IDLE); } break; case USB_CR_NOT_SUPPORTED: usba_pipe_new_state(ph_data, USB_PIPE_STATE_IDLE); break; case USB_CR_PIPE_RESET: case USB_CR_FLUSHED: break; default: usba_pipe_new_state(ph_data, USB_PIPE_STATE_ERROR); break; } } pipe_state = usba_get_ph_state(ph_data); mutex_exit(&ph_data->p_mutex); if (attrs & USB_ATTRS_PIPE_RESET) { if ((completion_reason != USB_CR_PIPE_RESET) && (pipe_state == USB_PIPE_STATE_ERROR)) { hcdi_autoclearing(req_wrp); } } usba_req_exc_cb(req_wrp, 0, 0); mutex_enter(&ph_data->p_mutex); } /* Update the hcdi error kstats */ if (completion_reason) { mutex_enter(&hcdi->hcdi_mutex); usba_hcdi_update_error_stats(hcdi, completion_reason); mutex_exit(&hcdi->hcdi_mutex); } /* * Once the callback is finished, release the pipe handle * we start the next request first to avoid that the * pipe gets closed while starting the next request */ mutex_exit(&ph_data->p_mutex); usba_start_next_req(ph_data); mutex_enter(&ph_data->p_mutex); } /* * thread to perform callbacks on the shared queue */ static void hcdi_shared_cb_thread(void *arg) { usba_req_wrapper_t *req_wrp = (usba_req_wrapper_t *)arg; usba_pipe_handle_data_t *ph_data = req_wrp->wr_ph_data; usba_ph_impl_t *ph_impl = ph_data->p_ph_impl; usba_hcdi_t *hcdi = usba_hcdi_get_hcdi(ph_data-> p_usba_device->usb_root_hub_dip); /* * hold the ph_data. we can't use usba_hold_ph_data() since * it will return NULL if we are closing the pipe which would * then leave all requests stuck in the cb_queue */ mutex_enter(&ph_impl->usba_ph_mutex); ph_impl->usba_ph_ref_count++; USB_DPRINTF_L4(DPRINT_MASK_HCDI, hcdi->hcdi_log_handle, "hcdi_shared_cb_thread: ph_data=0x%p ref=%d req=0x%p", ph_data, ph_impl->usba_ph_ref_count, req_wrp); mutex_exit(&ph_impl->usba_ph_mutex); /* do the callback */ mutex_enter(&ph_data->p_mutex); hcdi_do_cb(ph_data, req_wrp, hcdi); mutex_exit(&ph_data->p_mutex); USB_DPRINTF_L4(DPRINT_MASK_HCDI, hcdi->hcdi_log_handle, "hcdi_cb_thread done: ph_data=0x%p", ph_data); usba_release_ph_data(ph_impl); } /* * soft interrupt handler */ /*ARGSUSED*/ static uint_t hcdi_soft_intr(caddr_t arg1, caddr_t arg2) { usba_hcdi_t *hcdi = (usba_hcdi_t *)arg1; usba_req_wrapper_t *req_wrp; int count = 0; while ((req_wrp = (usba_req_wrapper_t *) usba_rm_first_pvt_from_list(&hcdi->hcdi_cb_queue)) != NULL) { usba_pipe_handle_data_t *ph_data = req_wrp->wr_ph_data; usba_ph_impl_t *ph_impl = ph_data->p_ph_impl; /* hold the pipe */ mutex_enter(&ph_impl->usba_ph_mutex); ph_impl->usba_ph_ref_count++; mutex_exit(&ph_impl->usba_ph_mutex); /* do the callback */ usba_req_normal_cb(req_wrp); /* decrement the soft interrupt count */ mutex_enter(&ph_data->p_mutex); ph_data->p_soft_intr--; mutex_exit(&ph_data->p_mutex); /* release the pipe */ mutex_enter(&ph_impl->usba_ph_mutex); ph_impl->usba_ph_ref_count--; mutex_exit(&ph_impl->usba_ph_mutex); count++; } return (count == 0 ? DDI_INTR_UNCLAIMED : DDI_INTR_CLAIMED); } /* * hcdi_autoclearing: * This function is called under the taskq context. It * resets the pipe, and clears the stall, if necessary */ static void hcdi_autoclearing(usba_req_wrapper_t *req_wrp) { usb_cr_t cr = req_wrp->wr_cr; usb_pipe_handle_t pipe_handle, def_pipe_handle; usb_cr_t completion_reason; usb_cb_flags_t cb_flags; int rval; usba_device_t *usba_device = req_wrp->wr_ph_data->p_usba_device; usba_hcdi_t *hcdi = usba_hcdi_get_hcdi( usba_device->usb_root_hub_dip); usb_req_attrs_t attrs = req_wrp->wr_attrs; USB_DPRINTF_L4(DPRINT_MASK_HCDI, hcdi->hcdi_log_handle, "hcdi_autoclearing: wrp=0x%p", req_wrp); pipe_handle = usba_get_pipe_handle(req_wrp->wr_ph_data); def_pipe_handle = usba_get_dflt_pipe_handle(req_wrp->wr_ph_data->p_dip); /* * first reset the pipe synchronously */ if ((attrs & USB_ATTRS_PIPE_RESET) == USB_ATTRS_PIPE_RESET) { usba_pipe_clear(pipe_handle); usba_req_set_cb_flags(req_wrp, USB_CB_RESET_PIPE); } ASSERT(def_pipe_handle); /* Do not clear if this request was a usb_get_status request */ if ((pipe_handle == def_pipe_handle) && (USBA_WRP2CTRL_REQ(req_wrp)->ctrl_bRequest == USB_REQ_GET_STATUS)) { USB_DPRINTF_L2(DPRINT_MASK_USBAI, hcdi->hcdi_log_handle, "hcdi_autoclearing: usb_get_status failed, no clearing"); /* if default pipe and stall no auto clearing */ } else if ((pipe_handle == def_pipe_handle) && (cr == USB_CR_STALL)) { USB_DPRINTF_L2(DPRINT_MASK_USBAI, hcdi->hcdi_log_handle, "hcdi_autoclearing: default pipe stalled, no clearing"); usba_req_set_cb_flags(req_wrp, USB_CB_PROTOCOL_STALL); /* else do auto clearing */ } else if (((attrs & USB_ATTRS_AUTOCLEARING) == USB_ATTRS_AUTOCLEARING) && (cr == USB_CR_STALL)) { ushort_t status = 0; rval = usb_get_status(req_wrp->wr_dip, def_pipe_handle, USB_DEV_REQ_DEV_TO_HOST | USB_DEV_REQ_RCPT_EP, req_wrp->wr_ph_data->p_ep.bEndpointAddress, &status, USB_FLAGS_SLEEP); if (rval != USB_SUCCESS) { USB_DPRINTF_L2(DPRINT_MASK_USBAI, hcdi->hcdi_log_handle, "get status (STALL) failed: rval=%d", rval); usba_pipe_clear(def_pipe_handle); } if ((rval != USB_SUCCESS) || (status & USB_EP_HALT_STATUS)) { usba_req_set_cb_flags(req_wrp, USB_CB_FUNCTIONAL_STALL); if ((rval = usb_pipe_sync_ctrl_xfer( req_wrp->wr_dip, def_pipe_handle, USB_DEV_REQ_HOST_TO_DEV | USB_DEV_REQ_RCPT_EP, USB_REQ_CLEAR_FEATURE, 0, req_wrp->wr_ph_data->p_ep.bEndpointAddress, 0, NULL, 0, &completion_reason, &cb_flags, USB_FLAGS_SLEEP)) != USB_SUCCESS) { USB_DPRINTF_L2(DPRINT_MASK_USBAI, hcdi->hcdi_log_handle, "auto clearing (STALL) failed: " "rval=%d, cr=0x%x cb=0x%x", rval, completion_reason, cb_flags); usba_pipe_clear(def_pipe_handle); } else { usba_req_set_cb_flags(req_wrp, USB_CB_STALL_CLEARED); } } else { usba_req_set_cb_flags(req_wrp, USB_CB_PROTOCOL_STALL); } } } /* * usba_hcdi_get_req_private: * This function is used to get the HCD private field * maintained by USBA. HCD calls this function. * * Arguments: * req - pointer to usb_*_req_t * * Return Values: * wr_hcd_private field from wrapper */ usb_opaque_t usba_hcdi_get_req_private(usb_opaque_t req) { usba_req_wrapper_t *wrp = USBA_REQ2WRP(req); return (wrp->wr_hcd_private); } /* * usba_hcdi_set_req_private: * This function is used to set the HCD private field * maintained by USBA. HCD calls this function. * * Arguments: * req - pointer to usb_*_req_t * hcd_private - wr_hcd_private field from wrapper */ void usba_hcdi_set_req_private(usb_opaque_t req, usb_opaque_t hcd_private) { usba_req_wrapper_t *wrp = USBA_REQ2WRP(req); wrp->wr_hcd_private = hcd_private; } /* get data toggle information for this endpoint */ uchar_t usba_hcdi_get_data_toggle(usba_device_t *usba_device, uint8_t ep_addr) { uchar_t toggle; usba_ph_impl_t *ph_impl; int ep_index; ep_index = usb_get_ep_index(ep_addr); mutex_enter(&usba_device->usb_mutex); ph_impl = &usba_device->usb_ph_list[ep_index]; mutex_enter(&ph_impl->usba_ph_mutex); toggle = (uchar_t)(ph_impl->usba_ph_flags & USBA_PH_DATA_TOGGLE); mutex_exit(&ph_impl->usba_ph_mutex); mutex_exit(&usba_device->usb_mutex); return (toggle); } /* set data toggle information for this endpoint */ void usba_hcdi_set_data_toggle(usba_device_t *usba_device, uint8_t ep_addr, uchar_t toggle) { usba_ph_impl_t *ph_impl; int ep_index; ep_index = usb_get_ep_index(ep_addr); mutex_enter(&usba_device->usb_mutex); ph_impl = &usba_device->usb_ph_list[ep_index]; mutex_enter(&ph_impl->usba_ph_mutex); ph_impl->usba_ph_flags &= ~USBA_PH_DATA_TOGGLE; ph_impl->usba_ph_flags |= (USBA_PH_DATA_TOGGLE & toggle); mutex_exit(&ph_impl->usba_ph_mutex); mutex_exit(&usba_device->usb_mutex); } /* get pipe_handle_impl ptr for this ep */ usba_pipe_handle_data_t * usba_hcdi_get_ph_data(usba_device_t *usba_device, uint8_t ep_addr) { return (usba_device->usb_ph_list[usb_get_ep_index(ep_addr)]. usba_ph_data); }