/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2010 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. * Copyright 2017 Joyent, Inc. * Copyright 2013 Nexenta Systems, Inc. All rights reserved. */ /* * MAC data path * * The MAC data path is concerned with the flow of traffic from mac clients -- * DLS, IP, etc. -- to various GLDv3 device drivers -- e1000g, vnic, aggr, * ixgbe, etc. -- and from the GLDv3 device drivers back to clients. * * ----------- * Terminology * ----------- * * MAC uses a lot of different, but related terms that are associated with the * design and structure of the data path. Before we cover other aspects, first * let's review the terminology that MAC uses. * * MAC * * This driver. It interfaces with device drivers and provides abstractions * that the rest of the system consumes. All data links -- things managed * with dladm(1M), are accessed through MAC. * * GLDv3 DEVICE DRIVER * * A GLDv3 device driver refers to a driver, both for pseudo-devices and * real devices, which implement the GLDv3 driver API. Common examples of * these are igb and ixgbe, which are drivers for various Intel networking * cards. These devices may or may not have various features, such as * hardware rings and checksum offloading. For MAC, a GLDv3 device is the * final point for the transmission of a packet and the starting point for * the receipt of a packet. * * FLOWS * * At a high level, a flow refers to a series of packets that are related. * Often times the term is used in the context of TCP to indicate a unique * TCP connection and the traffic over it. However, a flow can exist at * other levels of the system as well. MAC has a notion of a default flow * which is used for all unicast traffic addressed to the address of a MAC * device. For example, when a VNIC is created, a default flow is created * for the VNIC's MAC address. In addition, flows are created for broadcast * groups and a user may create a flow with flowadm(1M). * * CLASSIFICATION * * Classification refers to the notion of identifying an incoming frame * based on its destination address and optionally its source addresses and * doing different processing based on that information. Classification can * be done in both hardware and software. In general, we usually only * classify based on the layer two destination, eg. for Ethernet, the * destination MAC address. * * The system also will do classification based on layer three and layer * four properties. This is used to support things like flowadm(1M), which * allows setting QoS and other properties on a per-flow basis. * * RING * * Conceptually, a ring represents a series of framed messages, often in a * contiguous chunk of memory that acts as a circular buffer. Rings come in * a couple of forms. Generally they are either a hardware construct (hw * ring) or they are a software construct (sw ring) maintained by MAC. * * HW RING * * A hardware ring is a set of resources provided by a GLDv3 device driver * (even if it is a pseudo-device). A hardware ring comes in two different * forms: receive (rx) rings and transmit (tx) rings. An rx hw ring is * something that has a unique DMA (direct memory access) region and * generally supports some form of classification (though it isn't always * used), as well as a means of generating an interrupt specific to that * ring. For example, the device may generate a specific MSI-X for a PCI * express device. A tx ring is similar, except that it is dedicated to * transmission. It may also be a vector for enabling features such as VLAN * tagging and large transmit offloading. It usually has its own dedicated * interrupts for transmit being completed. * * SW RING * * A software ring is a construction of MAC. It represents the same thing * that a hardware ring generally does, a collection of frames. However, * instead of being in a contiguous ring of memory, they're instead linked * by using the mblk_t's b_next pointer. Each frame may itself be multiple * mblk_t's linked together by the b_cont pointer. A software ring always * represents a collection of classified packets; however, it varies as to * whether it uses only layer two information, or a combination of that and * additional layer three and layer four data. * * FANOUT * * Fanout is the idea of spreading out the load of processing frames based * on the source and destination information contained in the layer two, * three, and four headers, such that the data can then be processed in * parallel using multiple hardware threads. * * A fanout algorithm hashes the headers and uses that to place different * flows into a bucket. The most important thing is that packets that are * in the same flow end up in the same bucket. If they do not, performance * can be adversely affected. Consider the case of TCP. TCP severely * penalizes a connection if the data arrives out of order. If a given flow * is processed on different CPUs, then the data will appear out of order, * hence the invariant that fanout always hash a given flow to the same * bucket and thus get processed on the same CPU. * * RECEIVE SIDE SCALING (RSS) * * * Receive side scaling is a term that isn't common in illumos, but is used * by vendors and was popularized by Microsoft. It refers to the idea of * spreading the incoming receive load out across multiple interrupts which * can be directed to different CPUs. This allows a device to leverage * hardware rings even when it doesn't support hardware classification. The * hardware uses an algorithm to perform fanout that ensures the flow * invariant is maintained. * * SOFT RING SET * * A soft ring set, commonly abbreviated SRS, is a collection of rings and * is used for both transmitting and receiving. It is maintained in the * structure mac_soft_ring_set_t. A soft ring set is usually associated * with flows, and coordinates both the use of hardware and software rings. * Because the use of hardware rings can change as devices such as VNICs * come and go, we always ensure that the set has software classification * rules that correspond to the hardware classification rules from rings. * * Soft ring sets are also used for the enforcement of various QoS * properties. For example, if a bandwidth limit has been placed on a * specific flow or device, then that will be enforced by the soft ring * set. * * SERVICE ATTACHMENT POINT (SAP) * * The service attachment point is a DLPI (Data Link Provider Interface) * concept; however, it comes up quite often in MAC. Most MAC devices speak * a protocol that has some notion of different channels or message type * identifiers. For example, Ethernet defines an EtherType which is a part * of the Ethernet header and defines the particular protocol of the data * payload. If the EtherType is set to 0x0800, then it defines that the * contents of that Ethernet frame is IPv4 traffic. For Ethernet, the * EtherType is the SAP. * * In DLPI, a given consumer attaches to a specific SAP. In illumos, the ip * and arp drivers attach to the EtherTypes for IPv4, IPv6, and ARP. Using * libdlpi(3LIB) user software can attach to arbitrary SAPs. With the * exception of 802.1Q VLAN tagged traffic, MAC itself does not directly * consume the SAP; however, it uses that information as part of hashing * and it may be used as part of the construction of flows. * * PRIMARY MAC CLIENT * * The primary mac client refers to a mac client whose unicast address * matches the address of the device itself. For example, if the system has * instance of the e1000g driver such as e1000g0, e1000g1, etc., the * primary mac client is the one named after the device itself. VNICs that * are created on top of such devices are not the primary client. * * TRANSMIT DESCRIPTORS * * Transmit descriptors are a resource that most GLDv3 device drivers have. * Generally, a GLDv3 device driver takes a frame that's meant to be output * and puts a copy of it into a region of memory. Each region of memory * usually has an associated descriptor that the device uses to manage * properties of the frames. Devices have a limited number of such * descriptors. They get reclaimed once the device finishes putting the * frame on the wire. * * If the driver runs out of transmit descriptors, for example, the OS is * generating more frames than it can put on the wire, then it will return * them back to the MAC layer. * * --------------------------------- * Rings, Classification, and Fanout * --------------------------------- * * The heart of MAC is made up of rings, and not those that Elven-kings wear. * When receiving a packet, MAC breaks the work into two different, though * interrelated phases. The first phase is generally classification and then the * second phase is generally fanout. When a frame comes in from a GLDv3 Device, * MAC needs to determine where that frame should be delivered. If it's a * unicast frame (say a normal TCP/IP packet), then it will be delivered to a * single MAC client; however, if it's a broadcast or multicast frame, then MAC * may need to deliver it to multiple MAC clients. * * On transmit, classification isn't quite as important, but may still be used. * Unlike with the receive path, the classification is not used to determine * devices that should transmit something, but rather is used for special * properties of a flow, eg. bandwidth limits for a given IP address, device, or * connection. * * MAC employs a software classifier and leverages hardware classification as * well. The software classifier can leverage the full layer two information, * source, destination, VLAN, and SAP. If the SAP indicates that IP traffic is * being sent, it can classify based on the IP header, and finally, it also * knows how to classify based on the local and remote ports of TCP, UDP, and * SCTP. * * Hardware classifiers vary in capability. Generally all hardware classifiers * provide the capability to classify based on the destination MAC address. Some * hardware has additional filters built in for performing more in-depth * classification; however, it often has much more limited resources for these * activities as compared to the layer two destination address classification. * * The modus operandi in MAC is to always ensure that we have software-based * capabilities and rules in place and then to supplement that with hardware * resources when available. In general, simple layer two classification is * sufficient and nothing else is used, unless a specific flow is created with * tools such as flowadm(1M) or bandwidth limits are set on a device with * dladm(1M). * * RINGS AND GROUPS * * To get into how rings and classification play together, it's first important * to understand how hardware devices commonly associate rings and allow them to * be programmed. Recall that a hardware ring should be thought of as a DMA * buffer and an interrupt resource. Rings are then collected into groups. A * group itself has a series of classification rules. One or more MAC addresses * are assigned to a group. * * Hardware devices vary in terms of what capabilities they provide. Sometimes * they allow for a dynamic assignment of rings to a group and sometimes they * have a static assignment of rings to a group. For example, the ixgbe driver * has a static assignment of rings to groups such that every group has exactly * one ring and the number of groups is equal to the number of rings. * * Classification and receive side scaling both come into play with how a device * advertises itself to MAC and how MAC uses it. If a device supports layer two * classification of frames, then MAC will assign MAC addresses to a group as a * form of primary classification. If a single MAC address is assigned to a * group, a common case, then MAC will consider packets that come in from rings * on that group to be fully classified and will not need to do any software * classification unless a specific flow has been created. * * If a device supports receive side scaling, then it may advertise or support * groups with multiple rings. In those cases, then receive side scaling will * come into play and MAC will use that as a means of fanning out received * frames across multiple CPUs. This can also be combined with groups that * support layer two classification. * * If a device supports dynamic assignments of rings to groups, then MAC will * change around the way that rings are assigned to various groups as devices * come and go from the system. For example, when a VNIC is created, a new flow * will be created for the VNIC's MAC address. If a hardware ring is available, * MAC may opt to reassign it from one group to another. * * ASSIGNMENT OF HARDWARE RINGS * * This is a bit of a complicated subject that varies depending on the device, * the use of aggregations, the special nature of the primary mac client. This * section deserves being fleshed out. * * FANOUT * * illumos uses fanout to help spread out the incoming processing load of chains * of frames away from a single CPU. If a device supports receive side scaling, * then that provides an initial form of fanout; however, what we're concerned * with all happens after the context of a given set of frames being classified * to a soft ring set. * * After frames reach a soft ring set and account for any potential bandwidth * related accounting, they may be fanned out based on one of the following * three modes: * * o No Fanout * o Protocol level fanout * o Full software ring protocol fanout * * MAC makes the determination as to which of these modes a given soft ring set * obtains based on parameters such as whether or not it's the primary mac * client, whether it's on a 10 GbE or faster device, user controlled dladm(1M) * properties, and the nature of the hardware and the resources that it has. * * When there is no fanout, MAC does not create any soft rings for a device and * the device has frames delivered directly to the MAC client. * * Otherwise, all fanout is performed by software. MAC divides incoming frames * into one of three buckets -- IPv4 TCP traffic, IPv4 UDP traffic, and * everything else. Note, VLAN tagged traffic is considered other, regardless of * the interior EtherType. Regardless of the type of fanout, these three * categories or buckets are always used. * * The difference between protocol level fanout and full software ring protocol * fanout is the number of software rings that end up getting created. The * system always uses the same number of software rings per protocol bucket. So * in the first case when we're just doing protocol level fanout, we just create * one software ring each for IPv4 TCP traffic, IPv4 UDP traffic, and everything * else. * * In the case where we do full software ring protocol fanout, we generally use * mac_compute_soft_ring_count() to determine the number of rings. There are * other combinations of properties and devices that may send us down other * paths, but this is a common starting point. If it's a non-bandwidth enforced * device and we're on at least a 10 GbE link, then we'll use eight soft rings * per protocol bucket as a starting point. See mac_compute_soft_ring_count() * for more information on the total number. * * For each of these rings, we create a mac_soft_ring_t and an associated worker * thread. Particularly when doing full software ring protocol fanout, we bind * each of the worker threads to individual CPUs. * * The other advantage of these software rings is that it allows upper layers to * optionally poll on them. For example, TCP can leverage an squeue to poll on * the software ring, see squeue.c for more information. * * DLS BYPASS * * DLS is the data link services module. It interfaces with DLPI, which is the * primary way that other parts of the system such as IP interface with the MAC * layer. While DLS is traditionally a STREAMS-based interface, it allows for * certain modules such as IP to negotiate various more modern interfaces to be * used, which are useful for higher performance and allow it to use direct * function calls to DLS instead of using STREAMS. * * When we have IPv4 TCP or UDP software rings, then traffic on those rings is * eligible for what we call the dls bypass. In those cases, rather than going * out mac_rx_deliver() to DLS, DLS instead registers them to go directly via * the direct callback registered with DLS, generally ip_input(). * * HARDWARE RING POLLING * * GLDv3 devices with hardware rings generally deliver chains of messages * (mblk_t chain) during the context of a single interrupt. However, interrupts * are not the only way that these devices may be used. As part of implementing * ring support, a GLDv3 device driver must have a way to disable the generation * of that interrupt and allow for the operating system to poll on that ring. * * To implement this, every soft ring set has a worker thread and a polling * thread. If a sufficient packet rate comes into the system, MAC will 'blank' * (disable) interrupts on that specific ring and the polling thread will start * consuming packets from the hardware device and deliver them to the soft ring * set, where the worker thread will take over. * * Once the rate of packet intake drops down below a certain threshold, then * polling on the hardware ring will be quiesced and interrupts will be * re-enabled for the given ring. This effectively allows the system to shift * how it handles a ring based on its load. At high packet rates, polling on the * device as opposed to relying on interrupts can actually reduce overall system * load due to the minimization of interrupt activity. * * Note the importance of each ring having its own interrupt source. The whole * idea here is that we do not disable interrupts on the device as a whole, but * rather each ring can be independently toggled. * * USE OF WORKER THREADS * * Both the soft ring set and individual soft rings have a worker thread * associated with them that may be bound to a specific CPU in the system. Any * such assignment will get reassessed as part of dynamic reconfiguration events * in the system such as the onlining and offlining of CPUs and the creation of * CPU partitions. * * In many cases, while in an interrupt, we try to deliver a frame all the way * through the stack in the context of the interrupt itself. However, if the * amount of queued frames has exceeded a threshold, then we instead defer to * the worker thread to do this work and signal it. This is particularly useful * when you have the soft ring set delivering frames into multiple software * rings. If it was only delivering frames into a single software ring then * there'd be no need to have another thread take over. However, if it's * delivering chains of frames to multiple rings, then it's worthwhile to have * the worker for the software ring take over so that the different software * rings can be processed in parallel. * * In a similar fashion to the hardware polling thread, if we don't have a * backlog or there's nothing to do, then the worker thread will go back to * sleep and frames can be delivered all the way from an interrupt. This * behavior is useful as it's designed to minimize latency and the default * disposition of MAC is to optimize for latency. * * MAINTAINING CHAINS * * Another useful idea that MAC uses is to try and maintain frames in chains for * as long as possible. The idea is that all of MAC can handle chains of frames * structured as a series of mblk_t structures linked with the b_next pointer. * When performing software classification and software fanout, MAC does not * simply determine the destination and send the frame along. Instead, in the * case of classification, it tries to maintain a chain for as long as possible * before passing it along and performing additional processing. * * In the case of fanout, MAC first determines what the target software ring is * for every frame in the original chain and constructs a new chain for each * target. MAC then delivers the new chain to each software ring in succession. * * The whole rationale for doing this is that we want to try and maintain the * pipe as much as possible and deliver as many frames through the stack at once * that we can, rather than just pushing a single frame through. This can often * help bring down latency and allows MAC to get a better sense of the overall * activity in the system and properly engage worker threads. * * -------------------- * Bandwidth Management * -------------------- * * Bandwidth management is something that's built into the soft ring set itself. * When bandwidth limits are placed on a flow, a corresponding soft ring set is * toggled into bandwidth mode. This changes how we transmit and receive the * frames in question. * * Bandwidth management is done on a per-tick basis. We translate the user's * requested bandwidth from a quantity per-second into a quantity per-tick. MAC * cannot process a frame across more than one tick, thus it sets a lower bound * for the bandwidth cap to be a single MTU. This also means that when * hires ticks are enabled (hz is set to 1000), that the minimum amount of * bandwidth is higher, because the number of ticks has increased and MAC has to * go from accepting 100 packets / sec to 1000 / sec. * * The bandwidth counter is reset by either the soft ring set's worker thread or * a thread that is doing an inline transmit or receive if they discover that * the current tick is in the future from the recorded tick. * * Whenever we're receiving or transmitting data, we end up leaving most of the * work to the soft ring set's worker thread. This forces data inserted into the * soft ring set to be effectively serialized and allows us to exhume bandwidth * at a reasonable rate. If there is nothing in the soft ring set at the moment * and the set has available bandwidth, then it may processed inline. * Otherwise, the worker is responsible for taking care of the soft ring set. * * --------------------- * The Receive Data Path * --------------------- * * The following series of ASCII art images breaks apart the way that a frame * comes in and is processed in MAC. * * Part 1 -- Initial frame receipt, SRS classification * * Here, a frame is received by a GLDv3 driver, generally in the context of an * interrupt, and it ends up in mac_rx_common(). A driver calls either mac_rx or * mac_rx_ring, depending on whether or not it supports rings and can identify * the interrupt as having come from a specific ring. Here we determine whether * or not it's fully classified and perform software classification as * appropriate. From here, everything always ends up going to either entry [A] * or entry [B] based on whether or not they have subflow processing needed. We * leave via fanout or delivery. * * +===========+ * v hardware v * v interrupt v * +===========+ * | * * . . appropriate * | upcall made * | by GLDv3 driver . . always * | . * +--------+ | +----------+ . +---------------+ * | GLDv3 | +---->| mac_rx |-----*--->| mac_rx_common | * | Driver |-->--+ +----------+ +---------------+ * +--------+ | ^ | * | | ^ v * ^ | * . . always +----------------------+ * | | | | mac_promisc_dispatch | * | | +-------------+ +----------------------+ * | +--->| mac_rx_ring | | * | +-------------+ * . . hw classified * | v or single flow? * | | * | +--------++--------------+ * | | | * hw class, * | | * hw classified | subflows * | no hw class and . * | or single | exist * | subflows | | flow | * | | v v * | | +-----------+ +-----------+ * | | | goto | | goto | * | | | entry [A] | | entry [B] | * | | +-----------+ +-----------+ * | v ^ * | +-------------+ | * | | mac_rx_flow | * SRS and flow found, * | +-------------+ | call flow cb * | | +------+ * | v | * v +==========+ +-----------------+ * | v For each v--->| mac_rx_classify | * +----------+ v mblk_t v +-----------------+ * | srs | +==========+ * | pollling | * | thread |->------------------------------------------+ * +----------+ | * v . inline * +--------------------+ +----------+ +---------+ . * [A]---->| mac_rx_srs_process |-->| check bw |-->| enqueue |--*---------+ * +--------------------+ | limits | | frames | | * ^ +----------+ | to SRS | | * | +---------+ | * | send chain +--------+ | | * * when clasified | signal | * BW limits, | * | flow changes | srs |<---+ loopback, | * | | worker | stack too | * | +--------+ deep | * +-----------------+ +--------+ | * | mac_flow_lookup | | srs | +---------------------+ | * +-----------------+ | worker |---->| mac_rx_srs_drain |<---+ * ^ | thread | | mac_rx_srs_drain_bw | * | +--------+ +---------------------+ * | | * +----------------------------+ * software rings * [B]-->| mac_rx_srs_subflow_process | | for fanout? * +----------------------------+ | * +----------+-----------+ * | | * v v * +--------+ +--------+ * | goto | | goto | * | Part 2 | | Part 3 | * +--------+ +--------+ * * Part 2 -- Fanout * * This part is concerned with using software fanout to assign frames to * software rings and then deliver them to MAC clients or allow those rings to * be polled upon. While there are two different primary fanout entry points, * mac_rx_fanout and mac_rx_proto_fanout, they behave in similar ways, and aside * from some of the individual hashing techniques used, most of the general * flow is the same. * * +--------+ +-------------------+ * | From |---+--------->| mac_rx_srs_fanout |----+ * | Part 1 | | +-------------------+ | +=================+ * +--------+ | | v for each mblk_t v * * . . protocol only +--->v assign to new v * | fanout | v chain based on v * | | v hash % nrings v * | +-------------------------+ | +=================+ * +--->| mac_rx_srs_proto_fanout |----+ | * +-------------------------+ | * v * +------------+ +--------------------------+ +================+ * | enqueue in |<---| mac_rx_soft_ring_process |<------v for each chain v * | soft ring | +--------------------------+ +================+ * +------------+ * | +-----------+ * * soft ring set | soft ring | * | empty and no | worker | * | worker? | thread | * | +-----------+ * +------*----------------+ | * | . | v * No . * . Yes | +------------------------+ * | +----<--| mac_rx_soft_ring_drain | * | | +------------------------+ * v | * +-----------+ v * | signal | +---------------+ * | soft ring | | Deliver chain | * | worker | | goto Part 3 | * +-----------+ +---------------+ * * * Part 3 -- Packet Delivery * * Here, we go through and deliver the mblk_t chain directly to a given * processing function. In a lot of cases this is mac_rx_deliver(). In the case * of DLS bypass being used, then instead we end up going ahead and deliver it * to the direct callback registered with DLS, generally ip_input. * * * +---------+ +----------------+ +------------------+ * | From |---+------->| mac_rx_deliver |--->| Off to DLS, or | * | Parts 1 | | +----------------+ | other MAC client | * | and 2 | * DLS bypass +------------------+ * +---------+ | enabled +----------+ +-------------+ * +---------->| ip_input |--->| To IP | * +----------+ | and beyond! | * +-------------+ * * ---------------------- * The Transmit Data Path * ---------------------- * * Before we go into the images, it's worth talking about a problem that is a * bit different from the receive data path. GLDv3 device drivers have a finite * amount of transmit descriptors. When they run out, they return unused frames * back to MAC. MAC, at this point has several options about what it will do, * which vary based upon the settings that the client uses. * * When a device runs out of descriptors, the next thing that MAC does is * enqueue them off of the soft ring set or a software ring, depending on the * configuration of the soft ring set. MAC will enqueue up to a high watermark * of mblk_t chains, at which point it will indicate flow control back to the * client. Once this condition is reached, any mblk_t chains that were not * enqueued will be returned to the caller and they will have to decide what to * do with them. There are various flags that control this behavior that a * client may pass, which are discussed below. * * When this condition is hit, MAC also returns a cookie to the client in * addition to unconsumed frames. Clients can poll on that cookie and register a * callback with MAC to be notified when they are no longer subject to flow * control, at which point they may continue to call mac_tx(). This flow control * actually manages to work itself all the way up the stack, back through dls, * to ip, through the various protocols, and to sockfs. * * While the behavior described above is the default, this behavior can be * modified. There are two alternate modes, described below, which are * controlled with flags. * * DROP MODE * * This mode is controlled by having the client pass the MAC_DROP_ON_NO_DESC * flag. When this is passed, if a device driver runs out of transmit * descriptors, then the MAC layer will drop any unsent traffic. The client in * this case will never have any frames returned to it. * * DON'T ENQUEUE * * This mode is controlled by having the client pass the MAC_TX_NO_ENQUEUE flag. * If the MAC_DROP_ON_NO_DESC flag is also passed, it takes precedence. In this * mode, when we hit a case where a driver runs out of transmit descriptors, * then instead of enqueuing packets in a soft ring set or software ring, we * instead return the mblk_t chain back to the caller and immediately put the * soft ring set into flow control mode. * * The following series of ASCII art images describe the transmit data path that * MAC clients enter into based on calling into mac_tx(). A soft ring set has a * transmission function associated with it. There are seven possible * transmission modes, some of which share function entry points. The one that a * soft ring set gets depends on properties such as whether there are * transmission rings for fanout, whether the device involves aggregations, * whether any bandwidth limits exist, etc. * * * Part 1 -- Initial checks * * * . called by * | MAC clients * v . . No * +--------+ +-----------+ . +-------------------+ +====================+ * | mac_tx |->| device |-*-->| mac_protect_check |->v Is this the simple v * +--------+ | quiesced? | +-------------------+ v case? See [1] v * +-----------+ | +====================+ * * . Yes * failed | * v | frames | * +--------------+ | +-------+---------+ * | freemsgchain |<---------+ Yes . * No . * * +--------------+ v v * +-----------+ +--------+ * | goto | | goto | * | Part 2 | | SRS TX | * | Entry [A] | | func | * +-----------+ +--------+ * | | * | v * | +--------+ * +---------->| return | * | cookie | * +--------+ * * [1] The simple case refers to the SRS being configured with the * SRS_TX_DEFAULT transmission mode, having a single mblk_t (not a chain), their * being only a single active client, and not having a backlog in the srs. * * * Part 2 -- The SRS transmission functions * * This part is a bit more complicated. The different transmission paths often * leverage one another. In this case, we'll draw out the more common ones * before the parts that depend upon them. Here, we're going to start with the * workings of mac_tx_send() a common function that most of the others end up * calling. * * +-------------+ * | mac_tx_send | * +-------------+ * | * v * +=============+ +==============+ * v more than v--->v check v * v one client? v v VLAN and add v * +=============+ v VLAN tags v * | +==============+ * | | * +------------------+ * | * | [A] * v | * +============+ . No v * v more than v . +==========+ +--------------------------+ * v one active v-*---->v for each v---->| mac_promisc_dispatch_one |---+ * v client? v v mblk_t v +--------------------------+ | * +============+ +==========+ ^ | * | | +==========+ | * * . Yes | v hardware v<-------+ * v +------------+ v rings? v * +==========+ | +==========+ * v for each v No . . . * | * v mblk_t v specific | | * +==========+ flow | +-----+-----+ * | | | | * v | v v * +-----------------+ | +-------+ +---------+ * | mac_tx_classify |------------+ | GLDv3 | | GLDv3 | * +-----------------+ |TX func| | ring tx | * | +-------+ | func | * * Specific flow, generally | +---------+ * | bcast, mcast, loopback | | * v +-----+-----+ * +==========+ +---------+ | * v valid L2 v--*--->| freemsg | v * v header v . No +---------+ +-------------------+ * +==========+ | return unconsumed | * * . Yes | frames to the | * v | caller | * +===========+ +-------------------+ * v braodcast v +----------------+ ^ * v flow? v--*-->| mac_bcast_send |------------------+ * +===========+ . +----------------+ | * | . . Yes | * No . * v * | +---------------------+ +---------------+ +----------+ * +->|mac_promisc_dispatch |->| mac_fix_cksum |->| flow | * +---------------------+ +---------------+ | callback | * +----------+ * * * In addition, many but not all of the routines, all rely on * mac_tx_softring_process as an entry point. * * * . No . No * +--------------------------+ +========+ . +===========+ . +-------------+ * | mac_tx_soft_ring_process |-->v worker v-*->v out of tx v-*->| goto | * +--------------------------+ v only? v v descr.? v | mac_tx_send | * +========+ +===========+ +-------------+ * Yes . * * . Yes | * . No v | v * v=========+ . +===========+ . Yes | Yes . +==========+ * v apppend v<--*----------v out of tx v-*-------+---------*--v returned v * v mblk_t v v descr.? v | v frames? v * v chain v +===========+ | +==========+ * +=========+ | *. No * | | v * v v +------------+ * +===================+ +----------------------+ | done | * v worker scheduled? v | mac_tx_sring_enqueue | | processing | * v Out of tx descr? v +----------------------+ +------------+ * +===================+ | * | | . Yes v * * Yes * No . +============+ * | v +-*---------v drop on no v * | +========+ v v TX desc? v * | v wake v +----------+ +============+ * | v worker v | mac_pkt_ | * . No * | +========+ | drop | | . Yes . No * | | +----------+ v . . * | | v ^ +===============+ . +========+ . * +--+--------+---------+ | v Don't enqueue v-*->v ring v-*----+ * | | v Set? v v empty? v | * | +---------------+ +===============+ +========+ | * | | | | | * | | +-------------------+ | | * | *. Yes | +---------+ | * | | v v v * | | +===========+ +========+ +--------------+ * | +<-v At hiwat? v v append v | return | * | +===========+ v mblk_t v | mblk_t chain | * | * No v chain v | and flow | * | v +========+ | control | * | +=========+ | | cookie | * | v append v v +--------------+ * | v mblk_t v +========+ * | v chain v v wake v +------------+ * | +=========+ v worker v-->| done | * | | +========+ | processing | * | v .. Yes +------------+ * | +=========+ . +========+ * | v first v--*-->v wake v * | v append? v v worker v * | +=========+ +========+ * | | | * | No . * | * | v | * | +--------------+ | * +------>| Return | | * | flow control |<------------+ * | cookie | * +--------------+ * * * The remaining images are all specific to each of the different transmission * modes. * * SRS TX DEFAULT * * [ From Part 1 ] * | * v * +-------------------------+ * | mac_tx_single_ring_mode | * +-------------------------+ * | * | . Yes * v . * +==========+ . +============+ * v SRS v-*->v Try to v---->---------------------+ * v backlog? v v enqueue in v | * +==========+ v SRS v-->------+ * . . Queue too * | +============+ * don't enqueue | deep or * * . No ^ | | flag or at | drop flag * | | v | hiwat, | * v | | | return +---------+ * +-------------+ | | | cookie | freemsg | * | goto |-*-----+ | | +---------+ * | mac_tx_send | . returned | | | * +-------------+ mblk_t | | | * | | | | * | | | | * * . . all mblk_t * queued, | | * v consumed | may return | | * +-------------+ | tx cookie | | * | SRS TX func |<------------+------------+----------------+ * | completed | * +-------------+ * * SRS_TX_SERIALIZE * * +------------------------+ * | mac_tx_serializer_mode | * +------------------------+ * | * | . No * v . * +============+ . +============+ +-------------+ +============+ * v srs being v-*->v set SRS v--->| goto |-->v remove SRS v * v processed? v v proc flags v | mac_tx_send | v proc flag v * +============+ +============+ +-------------+ +============+ * | | * * Yes | * v . No v * +--------------------+ . +==========+ * | mac_tx_srs_enqueue | +------------------------*-----<--v returned v * +--------------------+ | v frames? v * | | . Yes +==========+ * | | . | * | | . +=========+ v * v +-<-*-v queued v +--------------------+ * +-------------+ | v frames? v<----| mac_tx_srs_enqueue | * | SRS TX func | | +=========+ +--------------------+ * | completed, |<------+ * . Yes * | may return | | v * | cookie | | +========+ * +-------------+ +-<---v wake v * v worker v * +========+ * * * SRS_TX_FANOUT * * . Yes * +--------------------+ +=============+ . +--------------------------+ * | mac_tx_fanout_mode |--->v Have fanout v-*-->| goto | * +--------------------+ v hint? v | mac_rx_soft_ring_process | * +=============+ +--------------------------+ * * . No | * v ^ * +===========+ | * +--->v for each v +===============+ * | v mblk_t v v pick softring v * same * +===========+ v from hash v * hash | | +===============+ * | v | * | +--------------+ | * +---| mac_pkt_hash |--->*------------+ * +--------------+ . different * hash or * done proc. * SRS_TX_AGGR chain * * +------------------+ +================================+ * | mac_tx_aggr_mode |--->v Use aggr capab function to v * +------------------+ v find appropriate tx ring. v * v Applies hash based on aggr v * v policy, see mac_tx_aggr_mode() v * +================================+ * | * v * +-------------------------------+ * | goto | * | mac_rx_srs_soft_ring_process | * +-------------------------------+ * * * SRS_TX_BW, SRS_TX_BW_FANOUT, SRS_TX_BW_AGGR * * Note, all three of these tx functions start from the same place -- * mac_tx_bw_mode(). * * +----------------+ * | mac_tx_bw_mode | * +----------------+ * | * v . No . No . Yes * +==============+ . +============+ . +=============+ . +=========+ * v Out of BW? v--*->v SRS empty? v--*->v reset BW v-*->v Bump BW v * +==============+ +============+ v tick count? v v Usage v * | | +=============+ +=========+ * | +---------+ | | * | | +--------------------+ | * | | | +----------------------+ * v | v v * +===============+ | +==========+ +==========+ +------------------+ * v Don't enqueue v | v set bw v v Is aggr? v--*-->| goto | * v flag set? v | v enforced v +==========+ . | mac_tx_aggr_mode |-+ * +===============+ | +==========+ | . +------------------+ | * | Yes .* | | No . * . | * | | | | | . Yes | * * . No | | v | | * | +---------+ | +========+ v +======+ | * | | freemsg | | v append v +============+ . Yes v pick v | * | +---------+ | v mblk_t v v Is fanout? v--*---->v ring v | * | | | v chain v +============+ +======+ | * +------+ | +========+ | | | * v | | v v | * +---------+ | v +-------------+ +--------------------+ | * | return | | +========+ | goto | | goto | | * | flow | | v wakeup v | mac_tx_send | | mac_tx_fanout_mode | | * | control | | v worker v +-------------+ +--------------------+ | * | cookie | | +========+ | | | * +---------+ | | | +------+------+ * | v | | * | +---------+ | v * | | return | +============+ +------------+ * | | flow | v unconsumed v-------+ | done | * | | control | v frames? v | | processing | * | | cookie | +============+ | +------------+ * | +---------+ | | * | Yes * | * | | | * | +===========+ | * | v subtract v | * | v unused bw v | * | +===========+ | * | | | * | v | * | +--------------------+ | * +------------->| mac_tx_srs_enqueue | | * +--------------------+ | * | | * | | * +------------+ | * | return fc | | * | cookie and |<------+ * | mblk_t | * +------------+ */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static mac_tx_cookie_t mac_tx_single_ring_mode(mac_soft_ring_set_t *, mblk_t *, uintptr_t, uint16_t, mblk_t **); static mac_tx_cookie_t mac_tx_serializer_mode(mac_soft_ring_set_t *, mblk_t *, uintptr_t, uint16_t, mblk_t **); static mac_tx_cookie_t mac_tx_fanout_mode(mac_soft_ring_set_t *, mblk_t *, uintptr_t, uint16_t, mblk_t **); static mac_tx_cookie_t mac_tx_bw_mode(mac_soft_ring_set_t *, mblk_t *, uintptr_t, uint16_t, mblk_t **); static mac_tx_cookie_t mac_tx_aggr_mode(mac_soft_ring_set_t *, mblk_t *, uintptr_t, uint16_t, mblk_t **); typedef struct mac_tx_mode_s { mac_tx_srs_mode_t mac_tx_mode; mac_tx_func_t mac_tx_func; } mac_tx_mode_t; /* * There are seven modes of operation on the Tx side. These modes get set * in mac_tx_srs_setup(). Except for the experimental TX_SERIALIZE mode, * none of the other modes are user configurable. They get selected by * the system depending upon whether the link (or flow) has multiple Tx * rings or a bandwidth configured, or if the link is an aggr, etc. * * When the Tx SRS is operating in aggr mode (st_mode) or if there are * multiple Tx rings owned by Tx SRS, then each Tx ring (pseudo or * otherwise) will have a soft ring associated with it. These soft rings * are stored in srs_tx_soft_rings[] array. * * Additionally in the case of aggr, there is the st_soft_rings[] array * in the mac_srs_tx_t structure. This array is used to store the same * set of soft rings that are present in srs_tx_soft_rings[] array but * in a different manner. The soft ring associated with the pseudo Tx * ring is saved at mr_index (of the pseudo ring) in st_soft_rings[] * array. This helps in quickly getting the soft ring associated with the * Tx ring when aggr_find_tx_ring() returns the pseudo Tx ring that is to * be used for transmit. */ mac_tx_mode_t mac_tx_mode_list[] = { {SRS_TX_DEFAULT, mac_tx_single_ring_mode}, {SRS_TX_SERIALIZE, mac_tx_serializer_mode}, {SRS_TX_FANOUT, mac_tx_fanout_mode}, {SRS_TX_BW, mac_tx_bw_mode}, {SRS_TX_BW_FANOUT, mac_tx_bw_mode}, {SRS_TX_AGGR, mac_tx_aggr_mode}, {SRS_TX_BW_AGGR, mac_tx_bw_mode} }; /* * Soft Ring Set (SRS) - The Run time code that deals with * dynamic polling from the hardware, bandwidth enforcement, * fanout etc. * * We try to use H/W classification on NIC and assign traffic for * a MAC address to a particular Rx ring or ring group. There is a * 1-1 mapping between a SRS and a Rx ring. The SRS dynamically * switches the underlying Rx ring between interrupt and * polling mode and enforces any specified B/W control. * * There is always a SRS created and tied to each H/W and S/W rule. * Whenever we create a H/W rule, we always add the the same rule to * S/W classifier and tie a SRS to it. * * In case a B/W control is specified, it is broken into bytes * per ticks and as soon as the quota for a tick is exhausted, * the underlying Rx ring is forced into poll mode for remainder of * the tick. The SRS poll thread only polls for bytes that are * allowed to come in the SRS. We typically let 4x the configured * B/W worth of packets to come in the SRS (to prevent unnecessary * drops due to bursts) but only process the specified amount. * * A MAC client (e.g. a VNIC or aggr) can have 1 or more * Rx rings (and corresponding SRSs) assigned to it. The SRS * in turn can have softrings to do protocol level fanout or * softrings to do S/W based fanout or both. In case the NIC * has no Rx rings, we do S/W classification to respective SRS. * The S/W classification rule is always setup and ready. This * allows the MAC layer to reassign Rx rings whenever needed * but packets still continue to flow via the default path and * getting S/W classified to correct SRS. * * The SRS's are used on both Tx and Rx side. They use the same * data structure but the processing routines have slightly different * semantics due to the fact that Rx side needs to do dynamic * polling etc. * * Dynamic Polling Notes * ===================== * * Each Soft ring set is capable of switching its Rx ring between * interrupt and poll mode and actively 'polls' for packets in * poll mode. If the SRS is implementing a B/W limit, it makes * sure that only Max allowed packets are pulled in poll mode * and goes to poll mode as soon as B/W limit is exceeded. As * such, there are no overheads to implement B/W limits. * * In poll mode, its better to keep the pipeline going where the * SRS worker thread keeps processing packets and poll thread * keeps bringing more packets (specially if they get to run * on different CPUs). This also prevents the overheads associated * by excessive signalling (on NUMA machines, this can be * pretty devastating). The exception is latency optimized case * where worker thread does no work and interrupt and poll thread * are allowed to do their own drain. * * We use the following policy to control Dynamic Polling: * 1) We switch to poll mode anytime the processing * thread causes a backlog to build up in SRS and * its associated Soft Rings (sr_poll_pkt_cnt > 0). * 2) As long as the backlog stays under the low water * mark (sr_lowat), we poll the H/W for more packets. * 3) If the backlog (sr_poll_pkt_cnt) exceeds low * water mark, we stay in poll mode but don't poll * the H/W for more packets. * 4) Anytime in polling mode, if we poll the H/W for * packets and find nothing plus we have an existing * backlog (sr_poll_pkt_cnt > 0), we stay in polling * mode but don't poll the H/W for packets anymore * (let the polling thread go to sleep). * 5) Once the backlog is relived (packets are processed) * we reenable polling (by signalling the poll thread) * only when the backlog dips below sr_poll_thres. * 6) sr_hiwat is used exclusively when we are not * polling capable and is used to decide when to * drop packets so the SRS queue length doesn't grow * infinitely. * * NOTE: Also see the block level comment on top of mac_soft_ring.c */ /* * mac_latency_optimize * * Controls whether the poll thread can process the packets inline * or let the SRS worker thread do the processing. This applies if * the SRS was not being processed. For latency sensitive traffic, * this needs to be true to allow inline processing. For throughput * under load, this should be false. * * This (and other similar) tunable should be rolled into a link * or flow specific workload hint that can be set using dladm * linkprop (instead of multiple such tunables). */ boolean_t mac_latency_optimize = B_TRUE; /* * MAC_RX_SRS_ENQUEUE_CHAIN and MAC_TX_SRS_ENQUEUE_CHAIN * * queue a mp or chain in soft ring set and increment the * local count (srs_count) for the SRS and the shared counter * (srs_poll_pkt_cnt - shared between SRS and its soft rings * to track the total unprocessed packets for polling to work * correctly). * * The size (total bytes queued) counters are incremented only * if we are doing B/W control. */ #define MAC_SRS_ENQUEUE_CHAIN(mac_srs, head, tail, count, sz) { \ ASSERT(MUTEX_HELD(&(mac_srs)->srs_lock)); \ if ((mac_srs)->srs_last != NULL) \ (mac_srs)->srs_last->b_next = (head); \ else \ (mac_srs)->srs_first = (head); \ (mac_srs)->srs_last = (tail); \ (mac_srs)->srs_count += count; \ } #define MAC_RX_SRS_ENQUEUE_CHAIN(mac_srs, head, tail, count, sz) { \ mac_srs_rx_t *srs_rx = &(mac_srs)->srs_rx; \ \ MAC_SRS_ENQUEUE_CHAIN(mac_srs, head, tail, count, sz); \ srs_rx->sr_poll_pkt_cnt += count; \ ASSERT(srs_rx->sr_poll_pkt_cnt > 0); \ if ((mac_srs)->srs_type & SRST_BW_CONTROL) { \ (mac_srs)->srs_size += (sz); \ mutex_enter(&(mac_srs)->srs_bw->mac_bw_lock); \ (mac_srs)->srs_bw->mac_bw_sz += (sz); \ mutex_exit(&(mac_srs)->srs_bw->mac_bw_lock); \ } \ } #define MAC_TX_SRS_ENQUEUE_CHAIN(mac_srs, head, tail, count, sz) { \ mac_srs->srs_state |= SRS_ENQUEUED; \ MAC_SRS_ENQUEUE_CHAIN(mac_srs, head, tail, count, sz); \ if ((mac_srs)->srs_type & SRST_BW_CONTROL) { \ (mac_srs)->srs_size += (sz); \ (mac_srs)->srs_bw->mac_bw_sz += (sz); \ } \ } /* * Turn polling on routines */ #define MAC_SRS_POLLING_ON(mac_srs) { \ ASSERT(MUTEX_HELD(&(mac_srs)->srs_lock)); \ if (((mac_srs)->srs_state & \ (SRS_POLLING_CAPAB|SRS_POLLING)) == SRS_POLLING_CAPAB) { \ (mac_srs)->srs_state |= SRS_POLLING; \ (void) mac_hwring_disable_intr((mac_ring_handle_t) \ (mac_srs)->srs_ring); \ (mac_srs)->srs_rx.sr_poll_on++; \ } \ } #define MAC_SRS_WORKER_POLLING_ON(mac_srs) { \ ASSERT(MUTEX_HELD(&(mac_srs)->srs_lock)); \ if (((mac_srs)->srs_state & \ (SRS_POLLING_CAPAB|SRS_WORKER|SRS_POLLING)) == \ (SRS_POLLING_CAPAB|SRS_WORKER)) { \ (mac_srs)->srs_state |= SRS_POLLING; \ (void) mac_hwring_disable_intr((mac_ring_handle_t) \ (mac_srs)->srs_ring); \ (mac_srs)->srs_rx.sr_worker_poll_on++; \ } \ } /* * MAC_SRS_POLL_RING * * Signal the SRS poll thread to poll the underlying H/W ring * provided it wasn't already polling (SRS_GET_PKTS was set). * * Poll thread gets to run only from mac_rx_srs_drain() and only * if the drain was being done by the worker thread. */ #define MAC_SRS_POLL_RING(mac_srs) { \ mac_srs_rx_t *srs_rx = &(mac_srs)->srs_rx; \ \ ASSERT(MUTEX_HELD(&(mac_srs)->srs_lock)); \ srs_rx->sr_poll_thr_sig++; \ if (((mac_srs)->srs_state & \ (SRS_POLLING_CAPAB|SRS_WORKER|SRS_GET_PKTS)) == \ (SRS_WORKER|SRS_POLLING_CAPAB)) { \ (mac_srs)->srs_state |= SRS_GET_PKTS; \ cv_signal(&(mac_srs)->srs_cv); \ } else { \ srs_rx->sr_poll_thr_busy++; \ } \ } /* * MAC_SRS_CHECK_BW_CONTROL * * Check to see if next tick has started so we can reset the * SRS_BW_ENFORCED flag and allow more packets to come in the * system. */ #define MAC_SRS_CHECK_BW_CONTROL(mac_srs) { \ ASSERT(MUTEX_HELD(&(mac_srs)->srs_lock)); \ ASSERT(((mac_srs)->srs_type & SRST_TX) || \ MUTEX_HELD(&(mac_srs)->srs_bw->mac_bw_lock)); \ clock_t now = ddi_get_lbolt(); \ if ((mac_srs)->srs_bw->mac_bw_curr_time != now) { \ (mac_srs)->srs_bw->mac_bw_curr_time = now; \ (mac_srs)->srs_bw->mac_bw_used = 0; \ if ((mac_srs)->srs_bw->mac_bw_state & SRS_BW_ENFORCED) \ (mac_srs)->srs_bw->mac_bw_state &= ~SRS_BW_ENFORCED; \ } \ } /* * MAC_SRS_WORKER_WAKEUP * * Wake up the SRS worker thread to process the queue as long as * no one else is processing the queue. If we are optimizing for * latency, we wake up the worker thread immediately or else we * wait mac_srs_worker_wakeup_ticks before worker thread gets * woken up. */ int mac_srs_worker_wakeup_ticks = 0; #define MAC_SRS_WORKER_WAKEUP(mac_srs) { \ ASSERT(MUTEX_HELD(&(mac_srs)->srs_lock)); \ if (!((mac_srs)->srs_state & SRS_PROC) && \ (mac_srs)->srs_tid == NULL) { \ if (((mac_srs)->srs_state & SRS_LATENCY_OPT) || \ (mac_srs_worker_wakeup_ticks == 0)) \ cv_signal(&(mac_srs)->srs_async); \ else \ (mac_srs)->srs_tid = \ timeout(mac_srs_fire, (mac_srs), \ mac_srs_worker_wakeup_ticks); \ } \ } #define TX_BANDWIDTH_MODE(mac_srs) \ ((mac_srs)->srs_tx.st_mode == SRS_TX_BW || \ (mac_srs)->srs_tx.st_mode == SRS_TX_BW_FANOUT || \ (mac_srs)->srs_tx.st_mode == SRS_TX_BW_AGGR) #define TX_SRS_TO_SOFT_RING(mac_srs, head, hint) { \ if (tx_mode == SRS_TX_BW_FANOUT) \ (void) mac_tx_fanout_mode(mac_srs, head, hint, 0, NULL);\ else \ (void) mac_tx_aggr_mode(mac_srs, head, hint, 0, NULL); \ } /* * MAC_TX_SRS_BLOCK * * Always called from mac_tx_srs_drain() function. SRS_TX_BLOCKED * will be set only if srs_tx_woken_up is FALSE. If * srs_tx_woken_up is TRUE, it indicates that the wakeup arrived * before we grabbed srs_lock to set SRS_TX_BLOCKED. We need to * attempt to transmit again and not setting SRS_TX_BLOCKED does * that. */ #define MAC_TX_SRS_BLOCK(srs, mp) { \ ASSERT(MUTEX_HELD(&(srs)->srs_lock)); \ if ((srs)->srs_tx.st_woken_up) { \ (srs)->srs_tx.st_woken_up = B_FALSE; \ } else { \ ASSERT(!((srs)->srs_state & SRS_TX_BLOCKED)); \ (srs)->srs_state |= SRS_TX_BLOCKED; \ (srs)->srs_tx.st_stat.mts_blockcnt++; \ } \ } /* * MAC_TX_SRS_TEST_HIWAT * * Called before queueing a packet onto Tx SRS to test and set * SRS_TX_HIWAT if srs_count exceeds srs_tx_hiwat. */ #define MAC_TX_SRS_TEST_HIWAT(srs, mp, tail, cnt, sz, cookie) { \ boolean_t enqueue = 1; \ \ if ((srs)->srs_count > (srs)->srs_tx.st_hiwat) { \ /* \ * flow-controlled. Store srs in cookie so that it \ * can be returned as mac_tx_cookie_t to client \ */ \ (srs)->srs_state |= SRS_TX_HIWAT; \ cookie = (mac_tx_cookie_t)srs; \ (srs)->srs_tx.st_hiwat_cnt++; \ if ((srs)->srs_count > (srs)->srs_tx.st_max_q_cnt) { \ /* increment freed stats */ \ (srs)->srs_tx.st_stat.mts_sdrops += cnt; \ /* \ * b_prev may be set to the fanout hint \ * hence can't use freemsg directly \ */ \ mac_pkt_drop(NULL, NULL, mp_chain, B_FALSE); \ DTRACE_PROBE1(tx_queued_hiwat, \ mac_soft_ring_set_t *, srs); \ enqueue = 0; \ } \ } \ if (enqueue) \ MAC_TX_SRS_ENQUEUE_CHAIN(srs, mp, tail, cnt, sz); \ } /* Some utility macros */ #define MAC_SRS_BW_LOCK(srs) \ if (!(srs->srs_type & SRST_TX)) \ mutex_enter(&srs->srs_bw->mac_bw_lock); #define MAC_SRS_BW_UNLOCK(srs) \ if (!(srs->srs_type & SRST_TX)) \ mutex_exit(&srs->srs_bw->mac_bw_lock); #define MAC_TX_SRS_DROP_MESSAGE(srs, mp, cookie) { \ mac_pkt_drop(NULL, NULL, mp, B_FALSE); \ /* increment freed stats */ \ mac_srs->srs_tx.st_stat.mts_sdrops++; \ cookie = (mac_tx_cookie_t)srs; \ } #define MAC_TX_SET_NO_ENQUEUE(srs, mp_chain, ret_mp, cookie) { \ mac_srs->srs_state |= SRS_TX_WAKEUP_CLIENT; \ cookie = (mac_tx_cookie_t)srs; \ *ret_mp = mp_chain; \ } /* * MAC_RX_SRS_TOODEEP * * Macro called as part of receive-side processing to determine if handling * can occur in situ (in the interrupt thread) or if it should be left to a * worker thread. Note that the constant used to make this determination is * not entirely made-up, and is a result of some emprical validation. That * said, the constant is left as a static variable to allow it to be * dynamically tuned in the field if and as needed. */ static uintptr_t mac_rx_srs_stack_needed = 10240; static uint_t mac_rx_srs_stack_toodeep; #ifndef STACK_GROWTH_DOWN #error Downward stack growth assumed. #endif #define MAC_RX_SRS_TOODEEP() (STACK_BIAS + (uintptr_t)getfp() - \ (uintptr_t)curthread->t_stkbase < mac_rx_srs_stack_needed && \ ++mac_rx_srs_stack_toodeep) /* * Drop the rx packet and advance to the next one in the chain. */ static void mac_rx_drop_pkt(mac_soft_ring_set_t *srs, mblk_t *mp) { mac_srs_rx_t *srs_rx = &srs->srs_rx; ASSERT(mp->b_next == NULL); mutex_enter(&srs->srs_lock); MAC_UPDATE_SRS_COUNT_LOCKED(srs, 1); MAC_UPDATE_SRS_SIZE_LOCKED(srs, msgdsize(mp)); mutex_exit(&srs->srs_lock); srs_rx->sr_stat.mrs_sdrops++; freemsg(mp); } /* DATAPATH RUNTIME ROUTINES */ /* * mac_srs_fire * * Timer callback routine for waking up the SRS worker thread. */ static void mac_srs_fire(void *arg) { mac_soft_ring_set_t *mac_srs = (mac_soft_ring_set_t *)arg; mutex_enter(&mac_srs->srs_lock); if (mac_srs->srs_tid == NULL) { mutex_exit(&mac_srs->srs_lock); return; } mac_srs->srs_tid = NULL; if (!(mac_srs->srs_state & SRS_PROC)) cv_signal(&mac_srs->srs_async); mutex_exit(&mac_srs->srs_lock); } /* * 'hint' is fanout_hint (type of uint64_t) which is given by the TCP/IP stack, * and it is used on the TX path. */ #define HASH_HINT(hint) \ ((hint) ^ ((hint) >> 24) ^ ((hint) >> 16) ^ ((hint) >> 8)) /* * hash based on the src address, dst address and the port information. */ #define HASH_ADDR(src, dst, ports) \ (ntohl((src) + (dst)) ^ ((ports) >> 24) ^ ((ports) >> 16) ^ \ ((ports) >> 8) ^ (ports)) #define COMPUTE_INDEX(key, sz) (key % sz) #define FANOUT_ENQUEUE_MP(head, tail, cnt, bw_ctl, sz, sz0, mp) { \ if ((tail) != NULL) { \ ASSERT((tail)->b_next == NULL); \ (tail)->b_next = (mp); \ } else { \ ASSERT((head) == NULL); \ (head) = (mp); \ } \ (tail) = (mp); \ (cnt)++; \ if ((bw_ctl)) \ (sz) += (sz0); \ } #define MAC_FANOUT_DEFAULT 0 #define MAC_FANOUT_RND_ROBIN 1 int mac_fanout_type = MAC_FANOUT_DEFAULT; #define MAX_SR_TYPES 3 /* fanout types for port based hashing */ enum pkt_type { V4_TCP = 0, V4_UDP, OTH, UNDEF }; /* * Pair of local and remote ports in the transport header */ #define PORTS_SIZE 4 /* * mac_rx_srs_proto_fanout * * This routine delivers packets destined to an SRS into one of the * protocol soft rings. * * Given a chain of packets we need to split it up into multiple sub chains * destined into TCP, UDP or OTH soft ring. Instead of entering * the soft ring one packet at a time, we want to enter it in the form of a * chain otherwise we get this start/stop behaviour where the worker thread * goes to sleep and then next packets comes in forcing it to wake up etc. */ static void mac_rx_srs_proto_fanout(mac_soft_ring_set_t *mac_srs, mblk_t *head) { struct ether_header *ehp; struct ether_vlan_header *evhp; uint32_t sap; ipha_t *ipha; uint8_t *dstaddr; size_t hdrsize; mblk_t *mp; mblk_t *headmp[MAX_SR_TYPES]; mblk_t *tailmp[MAX_SR_TYPES]; int cnt[MAX_SR_TYPES]; size_t sz[MAX_SR_TYPES]; size_t sz1; boolean_t bw_ctl; boolean_t hw_classified; boolean_t dls_bypass; boolean_t is_ether; boolean_t is_unicast; enum pkt_type type; mac_client_impl_t *mcip = mac_srs->srs_mcip; is_ether = (mcip->mci_mip->mi_info.mi_nativemedia == DL_ETHER); bw_ctl = ((mac_srs->srs_type & SRST_BW_CONTROL) != 0); /* * If we don't have a Rx ring, S/W classification would have done * its job and its a packet meant for us. If we were polling on * the default ring (i.e. there was a ring assigned to this SRS), * then we need to make sure that the mac address really belongs * to us. */ hw_classified = mac_srs->srs_ring != NULL && mac_srs->srs_ring->mr_classify_type == MAC_HW_CLASSIFIER; /* * Special clients (eg. VLAN, non ether, etc) need DLS * processing in the Rx path. SRST_DLS_BYPASS will be clear for * such SRSs. Another way of disabling bypass is to set the * MCIS_RX_BYPASS_DISABLE flag. */ dls_bypass = ((mac_srs->srs_type & SRST_DLS_BYPASS) != 0) && ((mcip->mci_state_flags & MCIS_RX_BYPASS_DISABLE) == 0); bzero(headmp, MAX_SR_TYPES * sizeof (mblk_t *)); bzero(tailmp, MAX_SR_TYPES * sizeof (mblk_t *)); bzero(cnt, MAX_SR_TYPES * sizeof (int)); bzero(sz, MAX_SR_TYPES * sizeof (size_t)); /* * We got a chain from SRS that we need to send to the soft rings. * Since squeues for TCP & IPv4 sap poll their soft rings (for * performance reasons), we need to separate out v4_tcp, v4_udp * and the rest goes in other. */ while (head != NULL) { mp = head; head = head->b_next; mp->b_next = NULL; type = OTH; sz1 = (mp->b_cont == NULL) ? MBLKL(mp) : msgdsize(mp); if (is_ether) { /* * At this point we can be sure the packet at least * has an ether header. */ if (sz1 < sizeof (struct ether_header)) { mac_rx_drop_pkt(mac_srs, mp); continue; } ehp = (struct ether_header *)mp->b_rptr; /* * Determine if this is a VLAN or non-VLAN packet. */ if ((sap = ntohs(ehp->ether_type)) == VLAN_TPID) { evhp = (struct ether_vlan_header *)mp->b_rptr; sap = ntohs(evhp->ether_type); hdrsize = sizeof (struct ether_vlan_header); /* * Check if the VID of the packet, if any, * belongs to this client. */ if (!mac_client_check_flow_vid(mcip, VLAN_ID(ntohs(evhp->ether_tci)))) { mac_rx_drop_pkt(mac_srs, mp); continue; } } else { hdrsize = sizeof (struct ether_header); } is_unicast = ((((uint8_t *)&ehp->ether_dhost)[0] & 0x01) == 0); dstaddr = (uint8_t *)&ehp->ether_dhost; } else { mac_header_info_t mhi; if (mac_header_info((mac_handle_t)mcip->mci_mip, mp, &mhi) != 0) { mac_rx_drop_pkt(mac_srs, mp); continue; } hdrsize = mhi.mhi_hdrsize; sap = mhi.mhi_bindsap; is_unicast = (mhi.mhi_dsttype == MAC_ADDRTYPE_UNICAST); dstaddr = (uint8_t *)mhi.mhi_daddr; } if (!dls_bypass) { FANOUT_ENQUEUE_MP(headmp[type], tailmp[type], cnt[type], bw_ctl, sz[type], sz1, mp); continue; } if (sap == ETHERTYPE_IP) { /* * If we are H/W classified, but we have promisc * on, then we need to check for the unicast address. */ if (hw_classified && mcip->mci_promisc_list != NULL) { mac_address_t *map; rw_enter(&mcip->mci_rw_lock, RW_READER); map = mcip->mci_unicast; if (bcmp(dstaddr, map->ma_addr, map->ma_len) == 0) type = UNDEF; rw_exit(&mcip->mci_rw_lock); } else if (is_unicast) { type = UNDEF; } } /* * This needs to become a contract with the driver for * the fast path. * * In the normal case the packet will have at least the L2 * header and the IP + Transport header in the same mblk. * This is usually the case when the NIC driver sends up * the packet. This is also true when the stack generates * a packet that is looped back and when the stack uses the * fastpath mechanism. The normal case is optimized for * performance and may bypass DLS. All other cases go through * the 'OTH' type path without DLS bypass. */ ipha = (ipha_t *)(mp->b_rptr + hdrsize); if ((type != OTH) && MBLK_RX_FANOUT_SLOWPATH(mp, ipha)) type = OTH; if (type == OTH) { FANOUT_ENQUEUE_MP(headmp[type], tailmp[type], cnt[type], bw_ctl, sz[type], sz1, mp); continue; } ASSERT(type == UNDEF); /* * We look for at least 4 bytes past the IP header to get * the port information. If we get an IP fragment, we don't * have the port information, and we use just the protocol * information. */ switch (ipha->ipha_protocol) { case IPPROTO_TCP: type = V4_TCP; mp->b_rptr += hdrsize; break; case IPPROTO_UDP: type = V4_UDP; mp->b_rptr += hdrsize; break; default: type = OTH; break; } FANOUT_ENQUEUE_MP(headmp[type], tailmp[type], cnt[type], bw_ctl, sz[type], sz1, mp); } for (type = V4_TCP; type < UNDEF; type++) { if (headmp[type] != NULL) { mac_soft_ring_t *softring; ASSERT(tailmp[type]->b_next == NULL); switch (type) { case V4_TCP: softring = mac_srs->srs_tcp_soft_rings[0]; break; case V4_UDP: softring = mac_srs->srs_udp_soft_rings[0]; break; case OTH: softring = mac_srs->srs_oth_soft_rings[0]; } mac_rx_soft_ring_process(mcip, softring, headmp[type], tailmp[type], cnt[type], sz[type]); } } } int fanout_unaligned = 0; /* * mac_rx_srs_long_fanout * * The fanout routine for VLANs, and for anything else that isn't performing * explicit dls bypass. Returns -1 on an error (drop the packet due to a * malformed packet), 0 on success, with values written in *indx and *type. */ static int mac_rx_srs_long_fanout(mac_soft_ring_set_t *mac_srs, mblk_t *mp, uint32_t sap, size_t hdrsize, enum pkt_type *type, uint_t *indx) { ip6_t *ip6h; ipha_t *ipha; uint8_t *whereptr; uint_t hash; uint16_t remlen; uint8_t nexthdr; uint16_t hdr_len; uint32_t src_val, dst_val; boolean_t modifiable = B_TRUE; boolean_t v6; ASSERT(MBLKL(mp) >= hdrsize); if (sap == ETHERTYPE_IPV6) { v6 = B_TRUE; hdr_len = IPV6_HDR_LEN; } else if (sap == ETHERTYPE_IP) { v6 = B_FALSE; hdr_len = IP_SIMPLE_HDR_LENGTH; } else { *indx = 0; *type = OTH; return (0); } ip6h = (ip6_t *)(mp->b_rptr + hdrsize); ipha = (ipha_t *)ip6h; if ((uint8_t *)ip6h == mp->b_wptr) { /* * The first mblk_t only includes the mac header. * Note that it is safe to change the mp pointer here, * as the subsequent operation does not assume mp * points to the start of the mac header. */ mp = mp->b_cont; /* * Make sure the IP header points to an entire one. */ if (mp == NULL) return (-1); if (MBLKL(mp) < hdr_len) { modifiable = (DB_REF(mp) == 1); if (modifiable && !pullupmsg(mp, hdr_len)) return (-1); } ip6h = (ip6_t *)mp->b_rptr; ipha = (ipha_t *)ip6h; } if (!modifiable || !(OK_32PTR((char *)ip6h)) || ((uint8_t *)ip6h + hdr_len > mp->b_wptr)) { /* * If either the IP header is not aligned, or it does not hold * the complete simple structure (a pullupmsg() is not an * option since it would result in an unaligned IP header), * fanout to the default ring. * * Note that this may cause packet reordering. */ *indx = 0; *type = OTH; fanout_unaligned++; return (0); } /* * Extract next-header, full header length, and source-hash value * using v4/v6 specific fields. */ if (v6) { remlen = ntohs(ip6h->ip6_plen); nexthdr = ip6h->ip6_nxt; src_val = V4_PART_OF_V6(ip6h->ip6_src); dst_val = V4_PART_OF_V6(ip6h->ip6_dst); /* * Do src based fanout if below tunable is set to B_TRUE or * when mac_ip_hdr_length_v6() fails because of malformed * packets or because mblks need to be concatenated using * pullupmsg(). */ if (!mac_ip_hdr_length_v6(ip6h, mp->b_wptr, &hdr_len, &nexthdr, NULL)) { goto src_dst_based_fanout; } } else { hdr_len = IPH_HDR_LENGTH(ipha); remlen = ntohs(ipha->ipha_length) - hdr_len; nexthdr = ipha->ipha_protocol; src_val = (uint32_t)ipha->ipha_src; dst_val = (uint32_t)ipha->ipha_dst; /* * Catch IPv4 fragment case here. IPv6 has nexthdr == FRAG * for its equivalent case. */ if ((ntohs(ipha->ipha_fragment_offset_and_flags) & (IPH_MF | IPH_OFFSET)) != 0) { goto src_dst_based_fanout; } } if (remlen < MIN_EHDR_LEN) return (-1); whereptr = (uint8_t *)ip6h + hdr_len; /* If the transport is one of below, we do port/SPI based fanout */ switch (nexthdr) { case IPPROTO_TCP: case IPPROTO_UDP: case IPPROTO_SCTP: case IPPROTO_ESP: /* * If the ports or SPI in the transport header is not part of * the mblk, do src_based_fanout, instead of calling * pullupmsg(). */ if (mp->b_cont == NULL || whereptr + PORTS_SIZE <= mp->b_wptr) break; /* out of switch... */ /* FALLTHRU */ default: goto src_dst_based_fanout; } switch (nexthdr) { case IPPROTO_TCP: hash = HASH_ADDR(src_val, dst_val, *(uint32_t *)whereptr); *indx = COMPUTE_INDEX(hash, mac_srs->srs_tcp_ring_count); *type = OTH; break; case IPPROTO_UDP: case IPPROTO_SCTP: case IPPROTO_ESP: if (mac_fanout_type == MAC_FANOUT_DEFAULT) { hash = HASH_ADDR(src_val, dst_val, *(uint32_t *)whereptr); *indx = COMPUTE_INDEX(hash, mac_srs->srs_udp_ring_count); } else { *indx = mac_srs->srs_ind % mac_srs->srs_udp_ring_count; mac_srs->srs_ind++; } *type = OTH; break; } return (0); src_dst_based_fanout: hash = HASH_ADDR(src_val, dst_val, (uint32_t)0); *indx = COMPUTE_INDEX(hash, mac_srs->srs_oth_ring_count); *type = OTH; return (0); } /* * mac_rx_srs_fanout * * This routine delivers packets destined to an SRS into a soft ring member * of the set. * * Given a chain of packets we need to split it up into multiple sub chains * destined for one of the TCP, UDP or OTH soft rings. Instead of entering * the soft ring one packet at a time, we want to enter it in the form of a * chain otherwise we get this start/stop behaviour where the worker thread * goes to sleep and then next packets comes in forcing it to wake up etc. * * Note: * Since we know what is the maximum fanout possible, we create a 2D array * of 'softring types * MAX_SR_FANOUT' for the head, tail, cnt and sz * variables so that we can enter the softrings with chain. We need the * MAX_SR_FANOUT so we can allocate the arrays on the stack (a kmem_alloc * for each packet would be expensive). If we ever want to have the * ability to have unlimited fanout, we should probably declare a head, * tail, cnt, sz with each soft ring (a data struct which contains a softring * along with these members) and create an array of this uber struct so we * don't have to do kmem_alloc. */ int fanout_oth1 = 0; int fanout_oth2 = 0; int fanout_oth3 = 0; int fanout_oth4 = 0; int fanout_oth5 = 0; static void mac_rx_srs_fanout(mac_soft_ring_set_t *mac_srs, mblk_t *head) { struct ether_header *ehp; struct ether_vlan_header *evhp; uint32_t sap; ipha_t *ipha; uint8_t *dstaddr; uint_t indx; size_t ports_offset; size_t ipha_len; size_t hdrsize; uint_t hash; mblk_t *mp; mblk_t *headmp[MAX_SR_TYPES][MAX_SR_FANOUT]; mblk_t *tailmp[MAX_SR_TYPES][MAX_SR_FANOUT]; int cnt[MAX_SR_TYPES][MAX_SR_FANOUT]; size_t sz[MAX_SR_TYPES][MAX_SR_FANOUT]; size_t sz1; boolean_t bw_ctl; boolean_t hw_classified; boolean_t dls_bypass; boolean_t is_ether; boolean_t is_unicast; int fanout_cnt; enum pkt_type type; mac_client_impl_t *mcip = mac_srs->srs_mcip; is_ether = (mcip->mci_mip->mi_info.mi_nativemedia == DL_ETHER); bw_ctl = ((mac_srs->srs_type & SRST_BW_CONTROL) != 0); /* * If we don't have a Rx ring, S/W classification would have done * its job and its a packet meant for us. If we were polling on * the default ring (i.e. there was a ring assigned to this SRS), * then we need to make sure that the mac address really belongs * to us. */ hw_classified = mac_srs->srs_ring != NULL && mac_srs->srs_ring->mr_classify_type == MAC_HW_CLASSIFIER; /* * Special clients (eg. VLAN, non ether, etc) need DLS * processing in the Rx path. SRST_DLS_BYPASS will be clear for * such SRSs. Another way of disabling bypass is to set the * MCIS_RX_BYPASS_DISABLE flag. */ dls_bypass = ((mac_srs->srs_type & SRST_DLS_BYPASS) != 0) && ((mcip->mci_state_flags & MCIS_RX_BYPASS_DISABLE) == 0); /* * Since the softrings are never destroyed and we always * create equal number of softrings for TCP, UDP and rest, * its OK to check one of them for count and use it without * any lock. In future, if soft rings get destroyed because * of reduction in fanout, we will need to ensure that happens * behind the SRS_PROC. */ fanout_cnt = mac_srs->srs_tcp_ring_count; bzero(headmp, MAX_SR_TYPES * MAX_SR_FANOUT * sizeof (mblk_t *)); bzero(tailmp, MAX_SR_TYPES * MAX_SR_FANOUT * sizeof (mblk_t *)); bzero(cnt, MAX_SR_TYPES * MAX_SR_FANOUT * sizeof (int)); bzero(sz, MAX_SR_TYPES * MAX_SR_FANOUT * sizeof (size_t)); /* * We got a chain from SRS that we need to send to the soft rings. * Since squeues for TCP & IPv4 sap poll their soft rings (for * performance reasons), we need to separate out v4_tcp, v4_udp * and the rest goes in other. */ while (head != NULL) { mp = head; head = head->b_next; mp->b_next = NULL; type = OTH; sz1 = (mp->b_cont == NULL) ? MBLKL(mp) : msgdsize(mp); if (is_ether) { /* * At this point we can be sure the packet at least * has an ether header. */ if (sz1 < sizeof (struct ether_header)) { mac_rx_drop_pkt(mac_srs, mp); continue; } ehp = (struct ether_header *)mp->b_rptr; /* * Determine if this is a VLAN or non-VLAN packet. */ if ((sap = ntohs(ehp->ether_type)) == VLAN_TPID) { evhp = (struct ether_vlan_header *)mp->b_rptr; sap = ntohs(evhp->ether_type); hdrsize = sizeof (struct ether_vlan_header); /* * Check if the VID of the packet, if any, * belongs to this client. */ if (!mac_client_check_flow_vid(mcip, VLAN_ID(ntohs(evhp->ether_tci)))) { mac_rx_drop_pkt(mac_srs, mp); continue; } } else { hdrsize = sizeof (struct ether_header); } is_unicast = ((((uint8_t *)&ehp->ether_dhost)[0] & 0x01) == 0); dstaddr = (uint8_t *)&ehp->ether_dhost; } else { mac_header_info_t mhi; if (mac_header_info((mac_handle_t)mcip->mci_mip, mp, &mhi) != 0) { mac_rx_drop_pkt(mac_srs, mp); continue; } hdrsize = mhi.mhi_hdrsize; sap = mhi.mhi_bindsap; is_unicast = (mhi.mhi_dsttype == MAC_ADDRTYPE_UNICAST); dstaddr = (uint8_t *)mhi.mhi_daddr; } if (!dls_bypass) { if (mac_rx_srs_long_fanout(mac_srs, mp, sap, hdrsize, &type, &indx) == -1) { mac_rx_drop_pkt(mac_srs, mp); continue; } FANOUT_ENQUEUE_MP(headmp[type][indx], tailmp[type][indx], cnt[type][indx], bw_ctl, sz[type][indx], sz1, mp); continue; } /* * If we are using the default Rx ring where H/W or S/W * classification has not happened, we need to verify if * this unicast packet really belongs to us. */ if (sap == ETHERTYPE_IP) { /* * If we are H/W classified, but we have promisc * on, then we need to check for the unicast address. */ if (hw_classified && mcip->mci_promisc_list != NULL) { mac_address_t *map; rw_enter(&mcip->mci_rw_lock, RW_READER); map = mcip->mci_unicast; if (bcmp(dstaddr, map->ma_addr, map->ma_len) == 0) type = UNDEF; rw_exit(&mcip->mci_rw_lock); } else if (is_unicast) { type = UNDEF; } } /* * This needs to become a contract with the driver for * the fast path. */ ipha = (ipha_t *)(mp->b_rptr + hdrsize); if ((type != OTH) && MBLK_RX_FANOUT_SLOWPATH(mp, ipha)) { type = OTH; fanout_oth1++; } if (type != OTH) { uint16_t frag_offset_flags; switch (ipha->ipha_protocol) { case IPPROTO_TCP: case IPPROTO_UDP: case IPPROTO_SCTP: case IPPROTO_ESP: ipha_len = IPH_HDR_LENGTH(ipha); if ((uchar_t *)ipha + ipha_len + PORTS_SIZE > mp->b_wptr) { type = OTH; break; } frag_offset_flags = ntohs(ipha->ipha_fragment_offset_and_flags); if ((frag_offset_flags & (IPH_MF | IPH_OFFSET)) != 0) { type = OTH; fanout_oth3++; break; } ports_offset = hdrsize + ipha_len; break; default: type = OTH; fanout_oth4++; break; } } if (type == OTH) { if (mac_rx_srs_long_fanout(mac_srs, mp, sap, hdrsize, &type, &indx) == -1) { mac_rx_drop_pkt(mac_srs, mp); continue; } FANOUT_ENQUEUE_MP(headmp[type][indx], tailmp[type][indx], cnt[type][indx], bw_ctl, sz[type][indx], sz1, mp); continue; } ASSERT(type == UNDEF); /* * XXX-Sunay: We should hold srs_lock since ring_count * below can change. But if we are always called from * mac_rx_srs_drain and SRS_PROC is set, then we can * enforce that ring_count can't be changed i.e. * to change fanout type or ring count, the calling * thread needs to be behind SRS_PROC. */ switch (ipha->ipha_protocol) { case IPPROTO_TCP: /* * Note that for ESP, we fanout on SPI and it is at the * same offset as the 2x16-bit ports. So it is clumped * along with TCP, UDP and SCTP. */ hash = HASH_ADDR(ipha->ipha_src, ipha->ipha_dst, *(uint32_t *)(mp->b_rptr + ports_offset)); indx = COMPUTE_INDEX(hash, mac_srs->srs_tcp_ring_count); type = V4_TCP; mp->b_rptr += hdrsize; break; case IPPROTO_UDP: case IPPROTO_SCTP: case IPPROTO_ESP: if (mac_fanout_type == MAC_FANOUT_DEFAULT) { hash = HASH_ADDR(ipha->ipha_src, ipha->ipha_dst, *(uint32_t *)(mp->b_rptr + ports_offset)); indx = COMPUTE_INDEX(hash, mac_srs->srs_udp_ring_count); } else { indx = mac_srs->srs_ind % mac_srs->srs_udp_ring_count; mac_srs->srs_ind++; } type = V4_UDP; mp->b_rptr += hdrsize; break; default: indx = 0; type = OTH; } FANOUT_ENQUEUE_MP(headmp[type][indx], tailmp[type][indx], cnt[type][indx], bw_ctl, sz[type][indx], sz1, mp); } for (type = V4_TCP; type < UNDEF; type++) { int i; for (i = 0; i < fanout_cnt; i++) { if (headmp[type][i] != NULL) { mac_soft_ring_t *softring; ASSERT(tailmp[type][i]->b_next == NULL); switch (type) { case V4_TCP: softring = mac_srs->srs_tcp_soft_rings[i]; break; case V4_UDP: softring = mac_srs->srs_udp_soft_rings[i]; break; case OTH: softring = mac_srs->srs_oth_soft_rings[i]; break; } mac_rx_soft_ring_process(mcip, softring, headmp[type][i], tailmp[type][i], cnt[type][i], sz[type][i]); } } } } #define SRS_BYTES_TO_PICKUP 150000 ssize_t max_bytes_to_pickup = SRS_BYTES_TO_PICKUP; /* * mac_rx_srs_poll_ring * * This SRS Poll thread uses this routine to poll the underlying hardware * Rx ring to get a chain of packets. It can inline process that chain * if mac_latency_optimize is set (default) or signal the SRS worker thread * to do the remaining processing. * * Since packets come in the system via interrupt or poll path, we also * update the stats and deal with promiscous clients here. */ void mac_rx_srs_poll_ring(mac_soft_ring_set_t *mac_srs) { kmutex_t *lock = &mac_srs->srs_lock; kcondvar_t *async = &mac_srs->srs_cv; mac_srs_rx_t *srs_rx = &mac_srs->srs_rx; mblk_t *head, *tail, *mp; callb_cpr_t cprinfo; ssize_t bytes_to_pickup; size_t sz; int count; mac_client_impl_t *smcip; CALLB_CPR_INIT(&cprinfo, lock, callb_generic_cpr, "mac_srs_poll"); mutex_enter(lock); start: for (;;) { if (mac_srs->srs_state & SRS_PAUSE) goto done; CALLB_CPR_SAFE_BEGIN(&cprinfo); cv_wait(async, lock); CALLB_CPR_SAFE_END(&cprinfo, lock); if (mac_srs->srs_state & SRS_PAUSE) goto done; check_again: if (mac_srs->srs_type & SRST_BW_CONTROL) { /* * We pick as many bytes as we are allowed to queue. * Its possible that we will exceed the total * packets queued in case this SRS is part of the * Rx ring group since > 1 poll thread can be pulling * upto the max allowed packets at the same time * but that should be OK. */ mutex_enter(&mac_srs->srs_bw->mac_bw_lock); bytes_to_pickup = mac_srs->srs_bw->mac_bw_drop_threshold - mac_srs->srs_bw->mac_bw_sz; /* * We shouldn't have been signalled if we * have 0 or less bytes to pick but since * some of the bytes accounting is driver * dependant, we do the safety check. */ if (bytes_to_pickup < 0) bytes_to_pickup = 0; mutex_exit(&mac_srs->srs_bw->mac_bw_lock); } else { /* * ToDO: Need to change the polling API * to add a packet count and a flag which * tells the driver whether we want packets * based on a count, or bytes, or all the * packets queued in the driver/HW. This * way, we never have to check the limits * on poll path. We truly let only as many * packets enter the system as we are willing * to process or queue. * * Something along the lines of * pkts_to_pickup = mac_soft_ring_max_q_cnt - * mac_srs->srs_poll_pkt_cnt */ /* * Since we are not doing B/W control, pick * as many packets as allowed. */ bytes_to_pickup = max_bytes_to_pickup; } /* Poll the underlying Hardware */ mutex_exit(lock); head = MAC_HWRING_POLL(mac_srs->srs_ring, (int)bytes_to_pickup); mutex_enter(lock); ASSERT((mac_srs->srs_state & SRS_POLL_THR_OWNER) == SRS_POLL_THR_OWNER); mp = tail = head; count = 0; sz = 0; while (mp != NULL) { tail = mp; sz += msgdsize(mp); mp = mp->b_next; count++; } if (head != NULL) { tail->b_next = NULL; smcip = mac_srs->srs_mcip; SRS_RX_STAT_UPDATE(mac_srs, pollbytes, sz); SRS_RX_STAT_UPDATE(mac_srs, pollcnt, count); /* * If there are any promiscuous mode callbacks * defined for this MAC client, pass them a copy * if appropriate and also update the counters. */ if (smcip != NULL) { if (smcip->mci_mip->mi_promisc_list != NULL) { mutex_exit(lock); mac_promisc_dispatch(smcip->mci_mip, head, NULL); mutex_enter(lock); } } if (mac_srs->srs_type & SRST_BW_CONTROL) { mutex_enter(&mac_srs->srs_bw->mac_bw_lock); mac_srs->srs_bw->mac_bw_polled += sz; mutex_exit(&mac_srs->srs_bw->mac_bw_lock); } MAC_RX_SRS_ENQUEUE_CHAIN(mac_srs, head, tail, count, sz); if (count <= 10) srs_rx->sr_stat.mrs_chaincntundr10++; else if (count > 10 && count <= 50) srs_rx->sr_stat.mrs_chaincnt10to50++; else srs_rx->sr_stat.mrs_chaincntover50++; } /* * We are guaranteed that SRS_PROC will be set if we * are here. Also, poll thread gets to run only if * the drain was being done by a worker thread although * its possible that worker thread is still running * and poll thread was sent down to keep the pipeline * going instead of doing a complete drain and then * trying to poll the NIC. * * So we need to check SRS_WORKER flag to make sure * that the worker thread is not processing the queue * in parallel to us. The flags and conditions are * protected by the srs_lock to prevent any race. We * ensure that we don't drop the srs_lock from now * till the end and similarly we don't drop the srs_lock * in mac_rx_srs_drain() till similar condition check * are complete. The mac_rx_srs_drain() needs to ensure * that SRS_WORKER flag remains set as long as its * processing the queue. */ if (!(mac_srs->srs_state & SRS_WORKER) && (mac_srs->srs_first != NULL)) { /* * We have packets to process and worker thread * is not running. Check to see if poll thread is * allowed to process. */ if (mac_srs->srs_state & SRS_LATENCY_OPT) { mac_srs->srs_drain_func(mac_srs, SRS_POLL_PROC); if (!(mac_srs->srs_state & SRS_PAUSE) && srs_rx->sr_poll_pkt_cnt <= srs_rx->sr_lowat) { srs_rx->sr_poll_again++; goto check_again; } /* * We are already above low water mark * so stay in the polling mode but no * need to poll. Once we dip below * the polling threshold, the processing * thread (soft ring) will signal us * to poll again (MAC_UPDATE_SRS_COUNT) */ srs_rx->sr_poll_drain_no_poll++; mac_srs->srs_state &= ~(SRS_PROC|SRS_GET_PKTS); /* * In B/W control case, its possible * that the backlog built up due to * B/W limit being reached and packets * are queued only in SRS. In this case, * we should schedule worker thread * since no one else will wake us up. */ if ((mac_srs->srs_type & SRST_BW_CONTROL) && (mac_srs->srs_tid == NULL)) { mac_srs->srs_tid = timeout(mac_srs_fire, mac_srs, 1); srs_rx->sr_poll_worker_wakeup++; } } else { /* * Wakeup the worker thread for more processing. * We optimize for throughput in this case. */ mac_srs->srs_state &= ~(SRS_PROC|SRS_GET_PKTS); MAC_SRS_WORKER_WAKEUP(mac_srs); srs_rx->sr_poll_sig_worker++; } } else if ((mac_srs->srs_first == NULL) && !(mac_srs->srs_state & SRS_WORKER)) { /* * There is nothing queued in SRS and * no worker thread running. Plus we * didn't get anything from the H/W * as well (head == NULL); */ ASSERT(head == NULL); mac_srs->srs_state &= ~(SRS_PROC|SRS_GET_PKTS); /* * If we have a packets in soft ring, don't allow * more packets to come into this SRS by keeping the * interrupts off but not polling the H/W. The * poll thread will get signaled as soon as * srs_poll_pkt_cnt dips below poll threshold. */ if (srs_rx->sr_poll_pkt_cnt == 0) { srs_rx->sr_poll_intr_enable++; MAC_SRS_POLLING_OFF(mac_srs); } else { /* * We know nothing is queued in SRS * since we are here after checking * srs_first is NULL. The backlog * is entirely due to packets queued * in Soft ring which will wake us up * and get the interface out of polling * mode once the backlog dips below * sr_poll_thres. */ srs_rx->sr_poll_no_poll++; } } else { /* * Worker thread is already running. * Nothing much to do. If the polling * was enabled, worker thread will deal * with that. */ mac_srs->srs_state &= ~SRS_GET_PKTS; srs_rx->sr_poll_goto_sleep++; } } done: mac_srs->srs_state |= SRS_POLL_THR_QUIESCED; cv_signal(&mac_srs->srs_async); /* * If this is a temporary quiesce then wait for the restart signal * from the srs worker. Then clear the flags and signal the srs worker * to ensure a positive handshake and go back to start. */ while (!(mac_srs->srs_state & (SRS_CONDEMNED | SRS_POLL_THR_RESTART))) cv_wait(async, lock); if (mac_srs->srs_state & SRS_POLL_THR_RESTART) { ASSERT(!(mac_srs->srs_state & SRS_CONDEMNED)); mac_srs->srs_state &= ~(SRS_POLL_THR_QUIESCED | SRS_POLL_THR_RESTART); cv_signal(&mac_srs->srs_async); goto start; } else { mac_srs->srs_state |= SRS_POLL_THR_EXITED; cv_signal(&mac_srs->srs_async); CALLB_CPR_EXIT(&cprinfo); thread_exit(); } } /* * mac_srs_pick_chain * * In Bandwidth control case, checks how many packets can be processed * and return them in a sub chain. */ static mblk_t * mac_srs_pick_chain(mac_soft_ring_set_t *mac_srs, mblk_t **chain_tail, size_t *chain_sz, int *chain_cnt) { mblk_t *head = NULL; mblk_t *tail = NULL; size_t sz; size_t tsz = 0; int cnt = 0; mblk_t *mp; ASSERT(MUTEX_HELD(&mac_srs->srs_lock)); mutex_enter(&mac_srs->srs_bw->mac_bw_lock); if (((mac_srs->srs_bw->mac_bw_used + mac_srs->srs_size) <= mac_srs->srs_bw->mac_bw_limit) || (mac_srs->srs_bw->mac_bw_limit == 0)) { mutex_exit(&mac_srs->srs_bw->mac_bw_lock); head = mac_srs->srs_first; mac_srs->srs_first = NULL; *chain_tail = mac_srs->srs_last; mac_srs->srs_last = NULL; *chain_sz = mac_srs->srs_size; *chain_cnt = mac_srs->srs_count; mac_srs->srs_count = 0; mac_srs->srs_size = 0; return (head); } /* * Can't clear the entire backlog. * Need to find how many packets to pick */ ASSERT(MUTEX_HELD(&mac_srs->srs_bw->mac_bw_lock)); while ((mp = mac_srs->srs_first) != NULL) { sz = msgdsize(mp); if ((tsz + sz + mac_srs->srs_bw->mac_bw_used) > mac_srs->srs_bw->mac_bw_limit) { if (!(mac_srs->srs_bw->mac_bw_state & SRS_BW_ENFORCED)) mac_srs->srs_bw->mac_bw_state |= SRS_BW_ENFORCED; break; } /* * The _size & cnt is decremented from the softrings * when they send up the packet for polling to work * properly. */ tsz += sz; cnt++; mac_srs->srs_count--; mac_srs->srs_size -= sz; if (tail != NULL) tail->b_next = mp; else head = mp; tail = mp; mac_srs->srs_first = mac_srs->srs_first->b_next; } mutex_exit(&mac_srs->srs_bw->mac_bw_lock); if (mac_srs->srs_first == NULL) mac_srs->srs_last = NULL; if (tail != NULL) tail->b_next = NULL; *chain_tail = tail; *chain_cnt = cnt; *chain_sz = tsz; return (head); } /* * mac_rx_srs_drain * * The SRS drain routine. Gets to run to clear the queue. Any thread * (worker, interrupt, poll) can call this based on processing model. * The first thing we do is disable interrupts if possible and then * drain the queue. we also try to poll the underlying hardware if * there is a dedicated hardware Rx ring assigned to this SRS. * * There is a equivalent drain routine in bandwidth control mode * mac_rx_srs_drain_bw. There is some code duplication between the two * routines but they are highly performance sensitive and are easier * to read/debug if they stay separate. Any code changes here might * also apply to mac_rx_srs_drain_bw as well. */ void mac_rx_srs_drain(mac_soft_ring_set_t *mac_srs, uint_t proc_type) { mblk_t *head; mblk_t *tail; timeout_id_t tid; int cnt = 0; mac_client_impl_t *mcip = mac_srs->srs_mcip; mac_srs_rx_t *srs_rx = &mac_srs->srs_rx; ASSERT(MUTEX_HELD(&mac_srs->srs_lock)); ASSERT(!(mac_srs->srs_type & SRST_BW_CONTROL)); /* If we are blanked i.e. can't do upcalls, then we are done */ if (mac_srs->srs_state & (SRS_BLANK | SRS_PAUSE)) { ASSERT((mac_srs->srs_type & SRST_NO_SOFT_RINGS) || (mac_srs->srs_state & SRS_PAUSE)); goto out; } if (mac_srs->srs_first == NULL) goto out; if (!(mac_srs->srs_state & SRS_LATENCY_OPT) && (srs_rx->sr_poll_pkt_cnt <= srs_rx->sr_lowat)) { /* * In the normal case, the SRS worker thread does no * work and we wait for a backlog to build up before * we switch into polling mode. In case we are * optimizing for throughput, we use the worker thread * as well. The goal is to let worker thread process * the queue and poll thread to feed packets into * the queue. As such, we should signal the poll * thread to try and get more packets. * * We could have pulled this check in the POLL_RING * macro itself but keeping it explicit here makes * the architecture more human understandable. */ MAC_SRS_POLL_RING(mac_srs); } again: head = mac_srs->srs_first; mac_srs->srs_first = NULL; tail = mac_srs->srs_last; mac_srs->srs_last = NULL; cnt = mac_srs->srs_count; mac_srs->srs_count = 0; ASSERT(head != NULL); ASSERT(tail != NULL); if ((tid = mac_srs->srs_tid) != NULL) mac_srs->srs_tid = NULL; mac_srs->srs_state |= (SRS_PROC|proc_type); /* * mcip is NULL for broadcast and multicast flows. The promisc * callbacks for broadcast and multicast packets are delivered from * mac_rx() and we don't need to worry about that case in this path */ if (mcip != NULL) { if (mcip->mci_promisc_list != NULL) { mutex_exit(&mac_srs->srs_lock); mac_promisc_client_dispatch(mcip, head); mutex_enter(&mac_srs->srs_lock); } if (MAC_PROTECT_ENABLED(mcip, MPT_IPNOSPOOF)) { mutex_exit(&mac_srs->srs_lock); mac_protect_intercept_dynamic(mcip, head); mutex_enter(&mac_srs->srs_lock); } } /* * Check if SRS itself is doing the processing * This direct path does not apply when subflows are present. In this * case, packets need to be dispatched to a soft ring according to the * flow's bandwidth and other resources contraints. */ if (mac_srs->srs_type & SRST_NO_SOFT_RINGS) { mac_direct_rx_t proc; void *arg1; mac_resource_handle_t arg2; /* * This is the case when a Rx is directly * assigned and we have a fully classified * protocol chain. We can deal with it in * one shot. */ proc = srs_rx->sr_func; arg1 = srs_rx->sr_arg1; arg2 = srs_rx->sr_arg2; mac_srs->srs_state |= SRS_CLIENT_PROC; mutex_exit(&mac_srs->srs_lock); if (tid != NULL) { (void) untimeout(tid); tid = NULL; } proc(arg1, arg2, head, NULL); /* * Decrement the size and count here itelf * since the packet has been processed. */ mutex_enter(&mac_srs->srs_lock); MAC_UPDATE_SRS_COUNT_LOCKED(mac_srs, cnt); if (mac_srs->srs_state & SRS_CLIENT_WAIT) cv_signal(&mac_srs->srs_client_cv); mac_srs->srs_state &= ~SRS_CLIENT_PROC; } else { /* Some kind of softrings based fanout is required */ mutex_exit(&mac_srs->srs_lock); if (tid != NULL) { (void) untimeout(tid); tid = NULL; } /* * Since the fanout routines can deal with chains, * shoot the entire chain up. */ if (mac_srs->srs_type & SRST_FANOUT_SRC_IP) mac_rx_srs_fanout(mac_srs, head); else mac_rx_srs_proto_fanout(mac_srs, head); mutex_enter(&mac_srs->srs_lock); } if (!(mac_srs->srs_state & (SRS_BLANK|SRS_PAUSE)) && (mac_srs->srs_first != NULL)) { /* * More packets arrived while we were clearing the * SRS. This can be possible because of one of * three conditions below: * 1) The driver is using multiple worker threads * to send the packets to us. * 2) The driver has a race in switching * between interrupt and polling mode or * 3) Packets are arriving in this SRS via the * S/W classification as well. * * We should switch to polling mode and see if we * need to send the poll thread down. Also, signal * the worker thread to process whats just arrived. */ MAC_SRS_POLLING_ON(mac_srs); if (srs_rx->sr_poll_pkt_cnt <= srs_rx->sr_lowat) { srs_rx->sr_drain_poll_sig++; MAC_SRS_POLL_RING(mac_srs); } /* * If we didn't signal the poll thread, we need * to deal with the pending packets ourselves. */ if (proc_type == SRS_WORKER) { srs_rx->sr_drain_again++; goto again; } else { srs_rx->sr_drain_worker_sig++; cv_signal(&mac_srs->srs_async); } } out: if (mac_srs->srs_state & SRS_GET_PKTS) { /* * Poll thread is already running. Leave the * SRS_RPOC set and hand over the control to * poll thread. */ mac_srs->srs_state &= ~proc_type; srs_rx->sr_drain_poll_running++; return; } /* * Even if there are no packets queued in SRS, we * need to make sure that the shared counter is * clear and any associated softrings have cleared * all the backlog. Otherwise, leave the interface * in polling mode and the poll thread will get * signalled once the count goes down to zero. * * If someone is already draining the queue (SRS_PROC is * set) when the srs_poll_pkt_cnt goes down to zero, * then it means that drain is already running and we * will turn off polling at that time if there is * no backlog. * * As long as there are packets queued either * in soft ring set or its soft rings, we will leave * the interface in polling mode (even if the drain * was done being the interrupt thread). We signal * the poll thread as well if we have dipped below * low water mark. * * NOTE: We can't use the MAC_SRS_POLLING_ON macro * since that turn polling on only for worker thread. * Its not worth turning polling on for interrupt * thread (since NIC will not issue another interrupt) * unless a backlog builds up. */ if ((srs_rx->sr_poll_pkt_cnt > 0) && (mac_srs->srs_state & SRS_POLLING_CAPAB)) { mac_srs->srs_state &= ~(SRS_PROC|proc_type); srs_rx->sr_drain_keep_polling++; MAC_SRS_POLLING_ON(mac_srs); if (srs_rx->sr_poll_pkt_cnt <= srs_rx->sr_lowat) MAC_SRS_POLL_RING(mac_srs); return; } /* Nothing else to do. Get out of poll mode */ MAC_SRS_POLLING_OFF(mac_srs); mac_srs->srs_state &= ~(SRS_PROC|proc_type); srs_rx->sr_drain_finish_intr++; } /* * mac_rx_srs_drain_bw * * The SRS BW drain routine. Gets to run to clear the queue. Any thread * (worker, interrupt, poll) can call this based on processing model. * The first thing we do is disable interrupts if possible and then * drain the queue. we also try to poll the underlying hardware if * there is a dedicated hardware Rx ring assigned to this SRS. * * There is a equivalent drain routine in non bandwidth control mode * mac_rx_srs_drain. There is some code duplication between the two * routines but they are highly performance sensitive and are easier * to read/debug if they stay separate. Any code changes here might * also apply to mac_rx_srs_drain as well. */ void mac_rx_srs_drain_bw(mac_soft_ring_set_t *mac_srs, uint_t proc_type) { mblk_t *head; mblk_t *tail; timeout_id_t tid; size_t sz = 0; int cnt = 0; mac_client_impl_t *mcip = mac_srs->srs_mcip; mac_srs_rx_t *srs_rx = &mac_srs->srs_rx; clock_t now; ASSERT(MUTEX_HELD(&mac_srs->srs_lock)); ASSERT(mac_srs->srs_type & SRST_BW_CONTROL); again: /* Check if we are doing B/W control */ mutex_enter(&mac_srs->srs_bw->mac_bw_lock); now = ddi_get_lbolt(); if (mac_srs->srs_bw->mac_bw_curr_time != now) { mac_srs->srs_bw->mac_bw_curr_time = now; mac_srs->srs_bw->mac_bw_used = 0; if (mac_srs->srs_bw->mac_bw_state & SRS_BW_ENFORCED) mac_srs->srs_bw->mac_bw_state &= ~SRS_BW_ENFORCED; } else if (mac_srs->srs_bw->mac_bw_state & SRS_BW_ENFORCED) { mutex_exit(&mac_srs->srs_bw->mac_bw_lock); goto done; } else if (mac_srs->srs_bw->mac_bw_used > mac_srs->srs_bw->mac_bw_limit) { mac_srs->srs_bw->mac_bw_state |= SRS_BW_ENFORCED; mutex_exit(&mac_srs->srs_bw->mac_bw_lock); goto done; } mutex_exit(&mac_srs->srs_bw->mac_bw_lock); /* If we are blanked i.e. can't do upcalls, then we are done */ if (mac_srs->srs_state & (SRS_BLANK | SRS_PAUSE)) { ASSERT((mac_srs->srs_type & SRST_NO_SOFT_RINGS) || (mac_srs->srs_state & SRS_PAUSE)); goto done; } sz = 0; cnt = 0; if ((head = mac_srs_pick_chain(mac_srs, &tail, &sz, &cnt)) == NULL) { /* * We couldn't pick up a single packet. */ mutex_enter(&mac_srs->srs_bw->mac_bw_lock); if ((mac_srs->srs_bw->mac_bw_used == 0) && (mac_srs->srs_size != 0) && !(mac_srs->srs_bw->mac_bw_state & SRS_BW_ENFORCED)) { /* * Seems like configured B/W doesn't * even allow processing of 1 packet * per tick. * * XXX: raise the limit to processing * at least 1 packet per tick. */ mac_srs->srs_bw->mac_bw_limit += mac_srs->srs_bw->mac_bw_limit; mac_srs->srs_bw->mac_bw_drop_threshold += mac_srs->srs_bw->mac_bw_drop_threshold; cmn_err(CE_NOTE, "mac_rx_srs_drain: srs(%p) " "raised B/W limit to %d since not even a " "single packet can be processed per " "tick %d\n", (void *)mac_srs, (int)mac_srs->srs_bw->mac_bw_limit, (int)msgdsize(mac_srs->srs_first)); } mutex_exit(&mac_srs->srs_bw->mac_bw_lock); goto done; } ASSERT(head != NULL); ASSERT(tail != NULL); /* zero bandwidth: drop all and return to interrupt mode */ mutex_enter(&mac_srs->srs_bw->mac_bw_lock); if (mac_srs->srs_bw->mac_bw_limit == 0) { srs_rx->sr_stat.mrs_sdrops += cnt; ASSERT(mac_srs->srs_bw->mac_bw_sz >= sz); mac_srs->srs_bw->mac_bw_sz -= sz; mac_srs->srs_bw->mac_bw_drop_bytes += sz; mutex_exit(&mac_srs->srs_bw->mac_bw_lock); mac_pkt_drop(NULL, NULL, head, B_FALSE); goto leave_poll; } else { mutex_exit(&mac_srs->srs_bw->mac_bw_lock); } if ((tid = mac_srs->srs_tid) != NULL) mac_srs->srs_tid = NULL; mac_srs->srs_state |= (SRS_PROC|proc_type); MAC_SRS_WORKER_POLLING_ON(mac_srs); /* * mcip is NULL for broadcast and multicast flows. The promisc * callbacks for broadcast and multicast packets are delivered from * mac_rx() and we don't need to worry about that case in this path */ if (mcip != NULL) { if (mcip->mci_promisc_list != NULL) { mutex_exit(&mac_srs->srs_lock); mac_promisc_client_dispatch(mcip, head); mutex_enter(&mac_srs->srs_lock); } if (MAC_PROTECT_ENABLED(mcip, MPT_IPNOSPOOF)) { mutex_exit(&mac_srs->srs_lock); mac_protect_intercept_dynamic(mcip, head); mutex_enter(&mac_srs->srs_lock); } } /* * Check if SRS itself is doing the processing * This direct path does not apply when subflows are present. In this * case, packets need to be dispatched to a soft ring according to the * flow's bandwidth and other resources contraints. */ if (mac_srs->srs_type & SRST_NO_SOFT_RINGS) { mac_direct_rx_t proc; void *arg1; mac_resource_handle_t arg2; /* * This is the case when a Rx is directly * assigned and we have a fully classified * protocol chain. We can deal with it in * one shot. */ proc = srs_rx->sr_func; arg1 = srs_rx->sr_arg1; arg2 = srs_rx->sr_arg2; mac_srs->srs_state |= SRS_CLIENT_PROC; mutex_exit(&mac_srs->srs_lock); if (tid != NULL) { (void) untimeout(tid); tid = NULL; } proc(arg1, arg2, head, NULL); /* * Decrement the size and count here itelf * since the packet has been processed. */ mutex_enter(&mac_srs->srs_lock); MAC_UPDATE_SRS_COUNT_LOCKED(mac_srs, cnt); MAC_UPDATE_SRS_SIZE_LOCKED(mac_srs, sz); if (mac_srs->srs_state & SRS_CLIENT_WAIT) cv_signal(&mac_srs->srs_client_cv); mac_srs->srs_state &= ~SRS_CLIENT_PROC; } else { /* Some kind of softrings based fanout is required */ mutex_exit(&mac_srs->srs_lock); if (tid != NULL) { (void) untimeout(tid); tid = NULL; } /* * Since the fanout routines can deal with chains, * shoot the entire chain up. */ if (mac_srs->srs_type & SRST_FANOUT_SRC_IP) mac_rx_srs_fanout(mac_srs, head); else mac_rx_srs_proto_fanout(mac_srs, head); mutex_enter(&mac_srs->srs_lock); } /* * Send the poll thread to pick up any packets arrived * so far. This also serves as the last check in case * nothing else is queued in the SRS. The poll thread * is signalled only in the case the drain was done * by the worker thread and SRS_WORKER is set. The * worker thread can run in parallel as long as the * SRS_WORKER flag is set. We we have nothing else to * process, we can exit while leaving SRS_PROC set * which gives the poll thread control to process and * cleanup once it returns from the NIC. * * If we have nothing else to process, we need to * ensure that we keep holding the srs_lock till * all the checks below are done and control is * handed to the poll thread if it was running. */ mutex_enter(&mac_srs->srs_bw->mac_bw_lock); if (!(mac_srs->srs_bw->mac_bw_state & SRS_BW_ENFORCED)) { if (mac_srs->srs_first != NULL) { if (proc_type == SRS_WORKER) { mutex_exit(&mac_srs->srs_bw->mac_bw_lock); if (srs_rx->sr_poll_pkt_cnt <= srs_rx->sr_lowat) MAC_SRS_POLL_RING(mac_srs); goto again; } else { cv_signal(&mac_srs->srs_async); } } } mutex_exit(&mac_srs->srs_bw->mac_bw_lock); done: if (mac_srs->srs_state & SRS_GET_PKTS) { /* * Poll thread is already running. Leave the * SRS_RPOC set and hand over the control to * poll thread. */ mac_srs->srs_state &= ~proc_type; return; } /* * If we can't process packets because we have exceeded * B/W limit for this tick, just set the timeout * and leave. * * Even if there are no packets queued in SRS, we * need to make sure that the shared counter is * clear and any associated softrings have cleared * all the backlog. Otherwise, leave the interface * in polling mode and the poll thread will get * signalled once the count goes down to zero. * * If someone is already draining the queue (SRS_PROC is * set) when the srs_poll_pkt_cnt goes down to zero, * then it means that drain is already running and we * will turn off polling at that time if there is * no backlog. As long as there are packets queued either * is soft ring set or its soft rings, we will leave * the interface in polling mode. */ mutex_enter(&mac_srs->srs_bw->mac_bw_lock); if ((mac_srs->srs_state & SRS_POLLING_CAPAB) && ((mac_srs->srs_bw->mac_bw_state & SRS_BW_ENFORCED) || (srs_rx->sr_poll_pkt_cnt > 0))) { MAC_SRS_POLLING_ON(mac_srs); mac_srs->srs_state &= ~(SRS_PROC|proc_type); if ((mac_srs->srs_first != NULL) && (mac_srs->srs_tid == NULL)) mac_srs->srs_tid = timeout(mac_srs_fire, mac_srs, 1); mutex_exit(&mac_srs->srs_bw->mac_bw_lock); return; } mutex_exit(&mac_srs->srs_bw->mac_bw_lock); leave_poll: /* Nothing else to do. Get out of poll mode */ MAC_SRS_POLLING_OFF(mac_srs); mac_srs->srs_state &= ~(SRS_PROC|proc_type); } /* * mac_srs_worker * * The SRS worker routine. Drains the queue when no one else is * processing it. */ void mac_srs_worker(mac_soft_ring_set_t *mac_srs) { kmutex_t *lock = &mac_srs->srs_lock; kcondvar_t *async = &mac_srs->srs_async; callb_cpr_t cprinfo; boolean_t bw_ctl_flag; CALLB_CPR_INIT(&cprinfo, lock, callb_generic_cpr, "srs_worker"); mutex_enter(lock); start: for (;;) { bw_ctl_flag = B_FALSE; if (mac_srs->srs_type & SRST_BW_CONTROL) { MAC_SRS_BW_LOCK(mac_srs); MAC_SRS_CHECK_BW_CONTROL(mac_srs); if (mac_srs->srs_bw->mac_bw_state & SRS_BW_ENFORCED) bw_ctl_flag = B_TRUE; MAC_SRS_BW_UNLOCK(mac_srs); } /* * The SRS_BW_ENFORCED flag may change since we have dropped * the mac_bw_lock. However the drain function can handle both * a drainable SRS or a bandwidth controlled SRS, and the * effect of scheduling a timeout is to wakeup the worker * thread which in turn will call the drain function. Since * we release the srs_lock atomically only in the cv_wait there * isn't a fear of waiting for ever. */ while (((mac_srs->srs_state & SRS_PROC) || (mac_srs->srs_first == NULL) || bw_ctl_flag || (mac_srs->srs_state & SRS_TX_BLOCKED)) && !(mac_srs->srs_state & SRS_PAUSE)) { /* * If we have packets queued and we are here * because B/W control is in place, we better * schedule the worker wakeup after 1 tick * to see if bandwidth control can be relaxed. */ if (bw_ctl_flag && mac_srs->srs_tid == NULL) { /* * We need to ensure that a timer is already * scheduled or we force schedule one for * later so that we can continue processing * after this quanta is over. */ mac_srs->srs_tid = timeout(mac_srs_fire, mac_srs, 1); } wait: CALLB_CPR_SAFE_BEGIN(&cprinfo); cv_wait(async, lock); CALLB_CPR_SAFE_END(&cprinfo, lock); if (mac_srs->srs_state & SRS_PAUSE) goto done; if (mac_srs->srs_state & SRS_PROC) goto wait; if (mac_srs->srs_first != NULL && mac_srs->srs_type & SRST_BW_CONTROL) { MAC_SRS_BW_LOCK(mac_srs); if (mac_srs->srs_bw->mac_bw_state & SRS_BW_ENFORCED) { MAC_SRS_CHECK_BW_CONTROL(mac_srs); } bw_ctl_flag = mac_srs->srs_bw->mac_bw_state & SRS_BW_ENFORCED; MAC_SRS_BW_UNLOCK(mac_srs); } } if (mac_srs->srs_state & SRS_PAUSE) goto done; mac_srs->srs_drain_func(mac_srs, SRS_WORKER); } done: /* * The Rx SRS quiesce logic first cuts off packet supply to the SRS * from both hard and soft classifications and waits for such threads * to finish before signaling the worker. So at this point the only * thread left that could be competing with the worker is the poll * thread. In the case of Tx, there shouldn't be any thread holding * SRS_PROC at this point. */ if (!(mac_srs->srs_state & SRS_PROC)) { mac_srs->srs_state |= SRS_PROC; } else { ASSERT((mac_srs->srs_type & SRST_TX) == 0); /* * Poll thread still owns the SRS and is still running */ ASSERT((mac_srs->srs_poll_thr == NULL) || ((mac_srs->srs_state & SRS_POLL_THR_OWNER) == SRS_POLL_THR_OWNER)); } mac_srs_worker_quiesce(mac_srs); /* * Wait for the SRS_RESTART or SRS_CONDEMNED signal from the initiator * of the quiesce operation */ while (!(mac_srs->srs_state & (SRS_CONDEMNED | SRS_RESTART))) cv_wait(&mac_srs->srs_async, &mac_srs->srs_lock); if (mac_srs->srs_state & SRS_RESTART) { ASSERT(!(mac_srs->srs_state & SRS_CONDEMNED)); mac_srs_worker_restart(mac_srs); mac_srs->srs_state &= ~SRS_PROC; goto start; } if (!(mac_srs->srs_state & SRS_CONDEMNED_DONE)) mac_srs_worker_quiesce(mac_srs); mac_srs->srs_state &= ~SRS_PROC; /* The macro drops the srs_lock */ CALLB_CPR_EXIT(&cprinfo); thread_exit(); } /* * mac_rx_srs_subflow_process * * Receive side routine called from interrupt path when there are * sub flows present on this SRS. */ /* ARGSUSED */ void mac_rx_srs_subflow_process(void *arg, mac_resource_handle_t srs, mblk_t *mp_chain, boolean_t loopback) { flow_entry_t *flent = NULL; flow_entry_t *prev_flent = NULL; mblk_t *mp = NULL; mblk_t *tail = NULL; mac_soft_ring_set_t *mac_srs = (mac_soft_ring_set_t *)srs; mac_client_impl_t *mcip; mcip = mac_srs->srs_mcip; ASSERT(mcip != NULL); /* * We need to determine the SRS for every packet * by walking the flow table, if we don't get any, * then we proceed using the SRS we came with. */ mp = tail = mp_chain; while (mp != NULL) { /* * We will increment the stats for the mactching subflow. * when we get the bytes/pkt count for the classified packets * later in mac_rx_srs_process. */ (void) mac_flow_lookup(mcip->mci_subflow_tab, mp, FLOW_INBOUND, &flent); if (mp == mp_chain || flent == prev_flent) { if (prev_flent != NULL) FLOW_REFRELE(prev_flent); prev_flent = flent; flent = NULL; tail = mp; mp = mp->b_next; continue; } tail->b_next = NULL; /* * A null indicates, this is for the mac_srs itself. * XXX-venu : probably assert for fe_rx_srs_cnt == 0. */ if (prev_flent == NULL || prev_flent->fe_rx_srs_cnt == 0) { mac_rx_srs_process(arg, (mac_resource_handle_t)mac_srs, mp_chain, loopback); } else { (prev_flent->fe_cb_fn)(prev_flent->fe_cb_arg1, prev_flent->fe_cb_arg2, mp_chain, loopback); FLOW_REFRELE(prev_flent); } prev_flent = flent; flent = NULL; mp_chain = mp; tail = mp; mp = mp->b_next; } /* Last chain */ ASSERT(mp_chain != NULL); if (prev_flent == NULL || prev_flent->fe_rx_srs_cnt == 0) { mac_rx_srs_process(arg, (mac_resource_handle_t)mac_srs, mp_chain, loopback); } else { (prev_flent->fe_cb_fn)(prev_flent->fe_cb_arg1, prev_flent->fe_cb_arg2, mp_chain, loopback); FLOW_REFRELE(prev_flent); } } /* * mac_rx_srs_process * * Receive side routine called from the interrupt path. * * loopback is set to force a context switch on the loopback * path between MAC clients. */ /* ARGSUSED */ void mac_rx_srs_process(void *arg, mac_resource_handle_t srs, mblk_t *mp_chain, boolean_t loopback) { mac_soft_ring_set_t *mac_srs = (mac_soft_ring_set_t *)srs; mblk_t *mp, *tail, *head; int count = 0; int count1; size_t sz = 0; size_t chain_sz, sz1; mac_bw_ctl_t *mac_bw; mac_srs_rx_t *srs_rx = &mac_srs->srs_rx; /* * Set the tail, count and sz. We set the sz irrespective * of whether we are doing B/W control or not for the * purpose of updating the stats. */ mp = tail = mp_chain; while (mp != NULL) { tail = mp; count++; sz += msgdsize(mp); mp = mp->b_next; } mutex_enter(&mac_srs->srs_lock); if (loopback) { SRS_RX_STAT_UPDATE(mac_srs, lclbytes, sz); SRS_RX_STAT_UPDATE(mac_srs, lclcnt, count); } else { SRS_RX_STAT_UPDATE(mac_srs, intrbytes, sz); SRS_RX_STAT_UPDATE(mac_srs, intrcnt, count); } /* * If the SRS in already being processed; has been blanked; * can be processed by worker thread only; or the B/W limit * has been reached, then queue the chain and check if * worker thread needs to be awakend. */ if (mac_srs->srs_type & SRST_BW_CONTROL) { mac_bw = mac_srs->srs_bw; ASSERT(mac_bw != NULL); mutex_enter(&mac_bw->mac_bw_lock); mac_bw->mac_bw_intr += sz; if (mac_bw->mac_bw_limit == 0) { /* zero bandwidth: drop all */ srs_rx->sr_stat.mrs_sdrops += count; mac_bw->mac_bw_drop_bytes += sz; mutex_exit(&mac_bw->mac_bw_lock); mutex_exit(&mac_srs->srs_lock); mac_pkt_drop(NULL, NULL, mp_chain, B_FALSE); return; } else { if ((mac_bw->mac_bw_sz + sz) <= mac_bw->mac_bw_drop_threshold) { mutex_exit(&mac_bw->mac_bw_lock); MAC_RX_SRS_ENQUEUE_CHAIN(mac_srs, mp_chain, tail, count, sz); } else { mp = mp_chain; chain_sz = 0; count1 = 0; tail = NULL; head = NULL; while (mp != NULL) { sz1 = msgdsize(mp); if (mac_bw->mac_bw_sz + chain_sz + sz1 > mac_bw->mac_bw_drop_threshold) break; chain_sz += sz1; count1++; tail = mp; mp = mp->b_next; } mutex_exit(&mac_bw->mac_bw_lock); if (tail != NULL) { head = tail->b_next; tail->b_next = NULL; MAC_RX_SRS_ENQUEUE_CHAIN(mac_srs, mp_chain, tail, count1, chain_sz); sz -= chain_sz; count -= count1; } else { /* Can't pick up any */ head = mp_chain; } if (head != NULL) { /* Drop any packet over the threshold */ srs_rx->sr_stat.mrs_sdrops += count; mutex_enter(&mac_bw->mac_bw_lock); mac_bw->mac_bw_drop_bytes += sz; mutex_exit(&mac_bw->mac_bw_lock); freemsgchain(head); } } MAC_SRS_WORKER_WAKEUP(mac_srs); mutex_exit(&mac_srs->srs_lock); return; } } /* * If the total number of packets queued in the SRS and * its associated soft rings exceeds the max allowed, * then drop the chain. If we are polling capable, this * shouldn't be happening. */ if (!(mac_srs->srs_type & SRST_BW_CONTROL) && (srs_rx->sr_poll_pkt_cnt > srs_rx->sr_hiwat)) { mac_bw = mac_srs->srs_bw; srs_rx->sr_stat.mrs_sdrops += count; mutex_enter(&mac_bw->mac_bw_lock); mac_bw->mac_bw_drop_bytes += sz; mutex_exit(&mac_bw->mac_bw_lock); freemsgchain(mp_chain); mutex_exit(&mac_srs->srs_lock); return; } MAC_RX_SRS_ENQUEUE_CHAIN(mac_srs, mp_chain, tail, count, sz); if (!(mac_srs->srs_state & SRS_PROC)) { /* * If we are coming via loopback, if we are not optimizing for * latency, or if our stack is running deep, we should signal * the worker thread. */ if (loopback || !(mac_srs->srs_state & SRS_LATENCY_OPT) || MAC_RX_SRS_TOODEEP()) { /* * For loopback, We need to let the worker take * over as we don't want to continue in the same * thread even if we can. This could lead to stack * overflows and may also end up using * resources (cpu) incorrectly. */ cv_signal(&mac_srs->srs_async); } else { /* * Seems like no one is processing the SRS and * there is no backlog. We also inline process * our packet if its a single packet in non * latency optimized case (in latency optimized * case, we inline process chains of any size). */ mac_srs->srs_drain_func(mac_srs, SRS_PROC_FAST); } } mutex_exit(&mac_srs->srs_lock); } /* TX SIDE ROUTINES (RUNTIME) */ /* * mac_tx_srs_no_desc * * This routine is called by Tx single ring default mode * when Tx ring runs out of descs. */ mac_tx_cookie_t mac_tx_srs_no_desc(mac_soft_ring_set_t *mac_srs, mblk_t *mp_chain, uint16_t flag, mblk_t **ret_mp) { mac_tx_cookie_t cookie = NULL; mac_srs_tx_t *srs_tx = &mac_srs->srs_tx; boolean_t wakeup_worker = B_TRUE; uint32_t tx_mode = srs_tx->st_mode; int cnt, sz; mblk_t *tail; ASSERT(tx_mode == SRS_TX_DEFAULT || tx_mode == SRS_TX_BW); if (flag & MAC_DROP_ON_NO_DESC) { MAC_TX_SRS_DROP_MESSAGE(mac_srs, mp_chain, cookie); } else { if (mac_srs->srs_first != NULL) wakeup_worker = B_FALSE; MAC_COUNT_CHAIN(mac_srs, mp_chain, tail, cnt, sz); if (flag & MAC_TX_NO_ENQUEUE) { /* * If TX_QUEUED is not set, queue the * packet and let mac_tx_srs_drain() * set the TX_BLOCKED bit for the * reasons explained above. Otherwise, * return the mblks. */ if (wakeup_worker) { MAC_TX_SRS_ENQUEUE_CHAIN(mac_srs, mp_chain, tail, cnt, sz); } else { MAC_TX_SET_NO_ENQUEUE(mac_srs, mp_chain, ret_mp, cookie); } } else { MAC_TX_SRS_TEST_HIWAT(mac_srs, mp_chain, tail, cnt, sz, cookie); } if (wakeup_worker) cv_signal(&mac_srs->srs_async); } return (cookie); } /* * mac_tx_srs_enqueue * * This routine is called when Tx SRS is operating in either serializer * or bandwidth mode. In serializer mode, a packet will get enqueued * when a thread cannot enter SRS exclusively. In bandwidth mode, * packets gets queued if allowed byte-count limit for a tick is * exceeded. The action that gets taken when MAC_DROP_ON_NO_DESC and * MAC_TX_NO_ENQUEUE is set is different than when operaing in either * the default mode or fanout mode. Here packets get dropped or * returned back to the caller only after hi-watermark worth of data * is queued. */ static mac_tx_cookie_t mac_tx_srs_enqueue(mac_soft_ring_set_t *mac_srs, mblk_t *mp_chain, uint16_t flag, uintptr_t fanout_hint, mblk_t **ret_mp) { mac_tx_cookie_t cookie = NULL; int cnt, sz; mblk_t *tail; boolean_t wakeup_worker = B_TRUE; /* * Ignore fanout hint if we don't have multiple tx rings. */ if (!MAC_TX_SOFT_RINGS(mac_srs)) fanout_hint = 0; if (mac_srs->srs_first != NULL) wakeup_worker = B_FALSE; MAC_COUNT_CHAIN(mac_srs, mp_chain, tail, cnt, sz); if (flag & MAC_DROP_ON_NO_DESC) { if (mac_srs->srs_count > mac_srs->srs_tx.st_hiwat) { MAC_TX_SRS_DROP_MESSAGE(mac_srs, mp_chain, cookie); } else { MAC_TX_SRS_ENQUEUE_CHAIN(mac_srs, mp_chain, tail, cnt, sz); } } else if (flag & MAC_TX_NO_ENQUEUE) { if ((mac_srs->srs_count > mac_srs->srs_tx.st_hiwat) || (mac_srs->srs_state & SRS_TX_WAKEUP_CLIENT)) { MAC_TX_SET_NO_ENQUEUE(mac_srs, mp_chain, ret_mp, cookie); } else { mp_chain->b_prev = (mblk_t *)fanout_hint; MAC_TX_SRS_ENQUEUE_CHAIN(mac_srs, mp_chain, tail, cnt, sz); } } else { /* * If you are BW_ENFORCED, just enqueue the * packet. srs_worker will drain it at the * prescribed rate. Before enqueueing, save * the fanout hint. */ mp_chain->b_prev = (mblk_t *)fanout_hint; MAC_TX_SRS_TEST_HIWAT(mac_srs, mp_chain, tail, cnt, sz, cookie); } if (wakeup_worker) cv_signal(&mac_srs->srs_async); return (cookie); } /* * There are seven tx modes: * * 1) Default mode (SRS_TX_DEFAULT) * 2) Serialization mode (SRS_TX_SERIALIZE) * 3) Fanout mode (SRS_TX_FANOUT) * 4) Bandwdith mode (SRS_TX_BW) * 5) Fanout and Bandwidth mode (SRS_TX_BW_FANOUT) * 6) aggr Tx mode (SRS_TX_AGGR) * 7) aggr Tx bw mode (SRS_TX_BW_AGGR) * * The tx mode in which an SRS operates is decided in mac_tx_srs_setup() * based on the number of Tx rings requested for an SRS and whether * bandwidth control is requested or not. * * The default mode (i.e., no fanout/no bandwidth) is used when the * underlying NIC does not have Tx rings or just one Tx ring. In this mode, * the SRS acts as a pass-thru. Packets will go directly to mac_tx_send(). * When the underlying Tx ring runs out of Tx descs, it starts queueing up * packets in SRS. When flow-control is relieved, the srs_worker drains * the queued packets and informs blocked clients to restart sending * packets. * * In the SRS_TX_SERIALIZE mode, all calls to mac_tx() are serialized. This * mode is used when the link has no Tx rings or only one Tx ring. * * In the SRS_TX_FANOUT mode, packets will be fanned out to multiple * Tx rings. Each Tx ring will have a soft ring associated with it. * These soft rings will be hung off the Tx SRS. Queueing if it happens * due to lack of Tx desc will be in individual soft ring (and not srs) * associated with Tx ring. * * In the TX_BW mode, tx srs will allow packets to go down to Tx ring * only if bw is available. Otherwise the packets will be queued in * SRS. If fanout to multiple Tx rings is configured, the packets will * be fanned out among the soft rings associated with the Tx rings. * * In SRS_TX_AGGR mode, mac_tx_aggr_mode() routine is called. This routine * invokes an aggr function, aggr_find_tx_ring(), to find a pseudo Tx ring * belonging to a port on which the packet has to be sent. Aggr will * always have a pseudo Tx ring associated with it even when it is an * aggregation over a single NIC that has no Tx rings. Even in such a * case, the single pseudo Tx ring will have a soft ring associated with * it and the soft ring will hang off the SRS. * * If a bandwidth is specified for an aggr, SRS_TX_BW_AGGR mode is used. * In this mode, the bandwidth is first applied on the outgoing packets * and later mac_tx_addr_mode() function is called to send the packet out * of one of the pseudo Tx rings. * * Four flags are used in srs_state for indicating flow control * conditions : SRS_TX_BLOCKED, SRS_TX_HIWAT, SRS_TX_WAKEUP_CLIENT. * SRS_TX_BLOCKED indicates out of Tx descs. SRS expects a wakeup from the * driver below. * SRS_TX_HIWAT indicates packet count enqueued in Tx SRS exceeded Tx hiwat * and flow-control pressure is applied back to clients. The clients expect * wakeup when flow-control is relieved. * SRS_TX_WAKEUP_CLIENT get set when (flag == MAC_TX_NO_ENQUEUE) and mblk * got returned back to client either due to lack of Tx descs or due to bw * control reasons. The clients expect a wakeup when condition is relieved. * * The fourth argument to mac_tx() is the flag. Normally it will be 0 but * some clients set the following values too: MAC_DROP_ON_NO_DESC, * MAC_TX_NO_ENQUEUE * Mac clients that do not want packets to be enqueued in the mac layer set * MAC_DROP_ON_NO_DESC value. The packets won't be queued in the Tx SRS or * Tx soft rings but instead get dropped when the NIC runs out of desc. The * behaviour of this flag is different when the Tx is running in serializer * or bandwidth mode. Under these (Serializer, bandwidth) modes, the packet * get dropped when Tx high watermark is reached. * There are some mac clients like vsw, aggr that want the mblks to be * returned back to clients instead of being queued in Tx SRS (or Tx soft * rings) under flow-control (i.e., out of desc or exceeding bw limits) * conditions. These clients call mac_tx() with MAC_TX_NO_ENQUEUE flag set. * In the default and Tx fanout mode, the un-transmitted mblks will be * returned back to the clients when the driver runs out of Tx descs. * SRS_TX_WAKEUP_CLIENT (or S_RING_WAKEUP_CLIENT) will be set in SRS (or * soft ring) so that the clients can be woken up when Tx desc become * available. When running in serializer or bandwidth mode mode, * SRS_TX_WAKEUP_CLIENT will be set when tx hi-watermark is reached. */ mac_tx_func_t mac_tx_get_func(uint32_t mode) { return (mac_tx_mode_list[mode].mac_tx_func); } /* ARGSUSED */ static mac_tx_cookie_t mac_tx_single_ring_mode(mac_soft_ring_set_t *mac_srs, mblk_t *mp_chain, uintptr_t fanout_hint, uint16_t flag, mblk_t **ret_mp) { mac_srs_tx_t *srs_tx = &mac_srs->srs_tx; mac_tx_stats_t stats; mac_tx_cookie_t cookie = NULL; ASSERT(srs_tx->st_mode == SRS_TX_DEFAULT); /* Regular case with a single Tx ring */ /* * SRS_TX_BLOCKED is set when underlying NIC runs * out of Tx descs and messages start getting * queued. It won't get reset until * tx_srs_drain() completely drains out the * messages. */ if ((mac_srs->srs_state & SRS_ENQUEUED) != 0) { /* Tx descs/resources not available */ mutex_enter(&mac_srs->srs_lock); if ((mac_srs->srs_state & SRS_ENQUEUED) != 0) { cookie = mac_tx_srs_no_desc(mac_srs, mp_chain, flag, ret_mp); mutex_exit(&mac_srs->srs_lock); return (cookie); } /* * While we were computing mblk count, the * flow control condition got relieved. * Continue with the transmission. */ mutex_exit(&mac_srs->srs_lock); } mp_chain = mac_tx_send(srs_tx->st_arg1, srs_tx->st_arg2, mp_chain, &stats); /* * Multiple threads could be here sending packets. * Under such conditions, it is not possible to * automically set SRS_TX_BLOCKED bit to indicate * out of tx desc condition. To atomically set * this, we queue the returned packet and do * the setting of SRS_TX_BLOCKED in * mac_tx_srs_drain(). */ if (mp_chain != NULL) { mutex_enter(&mac_srs->srs_lock); cookie = mac_tx_srs_no_desc(mac_srs, mp_chain, flag, ret_mp); mutex_exit(&mac_srs->srs_lock); return (cookie); } SRS_TX_STATS_UPDATE(mac_srs, &stats); return (NULL); } /* * mac_tx_serialize_mode * * This is an experimental mode implemented as per the request of PAE. * In this mode, all callers attempting to send a packet to the NIC * will get serialized. Only one thread at any time will access the * NIC to send the packet out. */ /* ARGSUSED */ static mac_tx_cookie_t mac_tx_serializer_mode(mac_soft_ring_set_t *mac_srs, mblk_t *mp_chain, uintptr_t fanout_hint, uint16_t flag, mblk_t **ret_mp) { mac_tx_stats_t stats; mac_tx_cookie_t cookie = NULL; mac_srs_tx_t *srs_tx = &mac_srs->srs_tx; /* Single ring, serialize below */ ASSERT(srs_tx->st_mode == SRS_TX_SERIALIZE); mutex_enter(&mac_srs->srs_lock); if ((mac_srs->srs_first != NULL) || (mac_srs->srs_state & SRS_PROC)) { /* * In serialization mode, queue all packets until * TX_HIWAT is set. * If drop bit is set, drop if TX_HIWAT is set. * If no_enqueue is set, still enqueue until hiwat * is set and return mblks after TX_HIWAT is set. */ cookie = mac_tx_srs_enqueue(mac_srs, mp_chain, flag, NULL, ret_mp); mutex_exit(&mac_srs->srs_lock); return (cookie); } /* * No packets queued, nothing on proc and no flow * control condition. Fast-path, ok. Do inline * processing. */ mac_srs->srs_state |= SRS_PROC; mutex_exit(&mac_srs->srs_lock); mp_chain = mac_tx_send(srs_tx->st_arg1, srs_tx->st_arg2, mp_chain, &stats); mutex_enter(&mac_srs->srs_lock); mac_srs->srs_state &= ~SRS_PROC; if (mp_chain != NULL) { cookie = mac_tx_srs_enqueue(mac_srs, mp_chain, flag, NULL, ret_mp); } if (mac_srs->srs_first != NULL) { /* * We processed inline our packet and a new * packet/s got queued while we were * processing. Wakeup srs worker */ cv_signal(&mac_srs->srs_async); } mutex_exit(&mac_srs->srs_lock); if (cookie == NULL) SRS_TX_STATS_UPDATE(mac_srs, &stats); return (cookie); } /* * mac_tx_fanout_mode * * In this mode, the SRS will have access to multiple Tx rings to send * the packet out. The fanout hint that is passed as an argument is * used to find an appropriate ring to fanout the traffic. Each Tx * ring, in turn, will have a soft ring associated with it. If a Tx * ring runs out of Tx desc's the returned packet will be queued in * the soft ring associated with that Tx ring. The srs itself will not * queue any packets. */ #define MAC_TX_SOFT_RING_PROCESS(chain) { \ index = COMPUTE_INDEX(hash, mac_srs->srs_tx_ring_count), \ softring = mac_srs->srs_tx_soft_rings[index]; \ cookie = mac_tx_soft_ring_process(softring, chain, flag, ret_mp); \ DTRACE_PROBE2(tx__fanout, uint64_t, hash, uint_t, index); \ } static mac_tx_cookie_t mac_tx_fanout_mode(mac_soft_ring_set_t *mac_srs, mblk_t *mp_chain, uintptr_t fanout_hint, uint16_t flag, mblk_t **ret_mp) { mac_soft_ring_t *softring; uint64_t hash; uint_t index; mac_tx_cookie_t cookie = NULL; ASSERT(mac_srs->srs_tx.st_mode == SRS_TX_FANOUT || mac_srs->srs_tx.st_mode == SRS_TX_BW_FANOUT); if (fanout_hint != 0) { /* * The hint is specified by the caller, simply pass the * whole chain to the soft ring. */ hash = HASH_HINT(fanout_hint); MAC_TX_SOFT_RING_PROCESS(mp_chain); } else { mblk_t *last_mp, *cur_mp, *sub_chain; uint64_t last_hash = 0; uint_t media = mac_srs->srs_mcip->mci_mip->mi_info.mi_media; /* * Compute the hash from the contents (headers) of the * packets of the mblk chain. Split the chains into * subchains of the same conversation. * * Since there may be more than one ring used for * sub-chains of the same call, and since the caller * does not maintain per conversation state since it * passed a zero hint, unsent subchains will be * dropped. */ flag |= MAC_DROP_ON_NO_DESC; ret_mp = NULL; ASSERT(ret_mp == NULL); sub_chain = NULL; last_mp = NULL; for (cur_mp = mp_chain; cur_mp != NULL; cur_mp = cur_mp->b_next) { hash = mac_pkt_hash(media, cur_mp, MAC_PKT_HASH_L4, B_TRUE); if (last_hash != 0 && hash != last_hash) { /* * Starting a different subchain, send current * chain out. */ ASSERT(last_mp != NULL); last_mp->b_next = NULL; MAC_TX_SOFT_RING_PROCESS(sub_chain); sub_chain = NULL; } /* add packet to subchain */ if (sub_chain == NULL) sub_chain = cur_mp; last_mp = cur_mp; last_hash = hash; } if (sub_chain != NULL) { /* send last subchain */ ASSERT(last_mp != NULL); last_mp->b_next = NULL; MAC_TX_SOFT_RING_PROCESS(sub_chain); } cookie = NULL; } return (cookie); } /* * mac_tx_bw_mode * * In the bandwidth mode, Tx srs will allow packets to go down to Tx ring * only if bw is available. Otherwise the packets will be queued in * SRS. If the SRS has multiple Tx rings, then packets will get fanned * out to a Tx rings. */ static mac_tx_cookie_t mac_tx_bw_mode(mac_soft_ring_set_t *mac_srs, mblk_t *mp_chain, uintptr_t fanout_hint, uint16_t flag, mblk_t **ret_mp) { int cnt, sz; mblk_t *tail; mac_tx_cookie_t cookie = NULL; mac_srs_tx_t *srs_tx = &mac_srs->srs_tx; clock_t now; ASSERT(TX_BANDWIDTH_MODE(mac_srs)); ASSERT(mac_srs->srs_type & SRST_BW_CONTROL); mutex_enter(&mac_srs->srs_lock); if (mac_srs->srs_bw->mac_bw_limit == 0) { /* * zero bandwidth, no traffic is sent: drop the packets, * or return the whole chain if the caller requests all * unsent packets back. */ if (flag & MAC_TX_NO_ENQUEUE) { cookie = (mac_tx_cookie_t)mac_srs; *ret_mp = mp_chain; } else { MAC_TX_SRS_DROP_MESSAGE(mac_srs, mp_chain, cookie); } mutex_exit(&mac_srs->srs_lock); return (cookie); } else if ((mac_srs->srs_first != NULL) || (mac_srs->srs_bw->mac_bw_state & SRS_BW_ENFORCED)) { cookie = mac_tx_srs_enqueue(mac_srs, mp_chain, flag, fanout_hint, ret_mp); mutex_exit(&mac_srs->srs_lock); return (cookie); } MAC_COUNT_CHAIN(mac_srs, mp_chain, tail, cnt, sz); now = ddi_get_lbolt(); if (mac_srs->srs_bw->mac_bw_curr_time != now) { mac_srs->srs_bw->mac_bw_curr_time = now; mac_srs->srs_bw->mac_bw_used = 0; } else if (mac_srs->srs_bw->mac_bw_used > mac_srs->srs_bw->mac_bw_limit) { mac_srs->srs_bw->mac_bw_state |= SRS_BW_ENFORCED; MAC_TX_SRS_ENQUEUE_CHAIN(mac_srs, mp_chain, tail, cnt, sz); /* * Wakeup worker thread. Note that worker * thread has to be woken up so that it * can fire up the timer to be woken up * on the next tick. Also once * BW_ENFORCED is set, it can only be * reset by srs_worker thread. Until then * all packets will get queued up in SRS * and hence this this code path won't be * entered until BW_ENFORCED is reset. */ cv_signal(&mac_srs->srs_async); mutex_exit(&mac_srs->srs_lock); return (cookie); } mac_srs->srs_bw->mac_bw_used += sz; mutex_exit(&mac_srs->srs_lock); if (srs_tx->st_mode == SRS_TX_BW_FANOUT) { mac_soft_ring_t *softring; uint_t indx, hash; hash = HASH_HINT(fanout_hint); indx = COMPUTE_INDEX(hash, mac_srs->srs_tx_ring_count); softring = mac_srs->srs_tx_soft_rings[indx]; return (mac_tx_soft_ring_process(softring, mp_chain, flag, ret_mp)); } else if (srs_tx->st_mode == SRS_TX_BW_AGGR) { return (mac_tx_aggr_mode(mac_srs, mp_chain, fanout_hint, flag, ret_mp)); } else { mac_tx_stats_t stats; mp_chain = mac_tx_send(srs_tx->st_arg1, srs_tx->st_arg2, mp_chain, &stats); if (mp_chain != NULL) { mutex_enter(&mac_srs->srs_lock); MAC_COUNT_CHAIN(mac_srs, mp_chain, tail, cnt, sz); if (mac_srs->srs_bw->mac_bw_used > sz) mac_srs->srs_bw->mac_bw_used -= sz; else mac_srs->srs_bw->mac_bw_used = 0; cookie = mac_tx_srs_enqueue(mac_srs, mp_chain, flag, fanout_hint, ret_mp); mutex_exit(&mac_srs->srs_lock); return (cookie); } SRS_TX_STATS_UPDATE(mac_srs, &stats); return (NULL); } } /* * mac_tx_aggr_mode * * This routine invokes an aggr function, aggr_find_tx_ring(), to find * a (pseudo) Tx ring belonging to a port on which the packet has to * be sent. aggr_find_tx_ring() first finds the outgoing port based on * L2/L3/L4 policy and then uses the fanout_hint passed to it to pick * a Tx ring from the selected port. * * Note that a port can be deleted from the aggregation. In such a case, * the aggregation layer first separates the port from the rest of the * ports making sure that port (and thus any Tx rings associated with * it) won't get selected in the call to aggr_find_tx_ring() function. * Later calls are made to mac_group_rem_ring() passing pseudo Tx ring * handles one by one which in turn will quiesce the Tx SRS and remove * the soft ring associated with the pseudo Tx ring. Unlike Rx side * where a cookie is used to protect against mac_rx_ring() calls on * rings that have been removed, no such cookie is needed on the Tx * side as the pseudo Tx ring won't be available anymore to * aggr_find_tx_ring() once the port has been removed. */ static mac_tx_cookie_t mac_tx_aggr_mode(mac_soft_ring_set_t *mac_srs, mblk_t *mp_chain, uintptr_t fanout_hint, uint16_t flag, mblk_t **ret_mp) { mac_srs_tx_t *srs_tx = &mac_srs->srs_tx; mac_tx_ring_fn_t find_tx_ring_fn; mac_ring_handle_t ring = NULL; void *arg; mac_soft_ring_t *sringp; find_tx_ring_fn = srs_tx->st_capab_aggr.mca_find_tx_ring_fn; arg = srs_tx->st_capab_aggr.mca_arg; if (find_tx_ring_fn(arg, mp_chain, fanout_hint, &ring) == NULL) return (NULL); sringp = srs_tx->st_soft_rings[((mac_ring_t *)ring)->mr_index]; return (mac_tx_soft_ring_process(sringp, mp_chain, flag, ret_mp)); } void mac_tx_invoke_callbacks(mac_client_impl_t *mcip, mac_tx_cookie_t cookie) { mac_cb_t *mcb; mac_tx_notify_cb_t *mtnfp; /* Wakeup callback registered clients */ MAC_CALLBACK_WALKER_INC(&mcip->mci_tx_notify_cb_info); for (mcb = mcip->mci_tx_notify_cb_list; mcb != NULL; mcb = mcb->mcb_nextp) { mtnfp = (mac_tx_notify_cb_t *)mcb->mcb_objp; mtnfp->mtnf_fn(mtnfp->mtnf_arg, cookie); } MAC_CALLBACK_WALKER_DCR(&mcip->mci_tx_notify_cb_info, &mcip->mci_tx_notify_cb_list); } /* ARGSUSED */ void mac_tx_srs_drain(mac_soft_ring_set_t *mac_srs, uint_t proc_type) { mblk_t *head, *tail; size_t sz; uint32_t tx_mode; uint_t saved_pkt_count; mac_tx_stats_t stats; mac_srs_tx_t *srs_tx = &mac_srs->srs_tx; clock_t now; saved_pkt_count = 0; ASSERT(mutex_owned(&mac_srs->srs_lock)); ASSERT(!(mac_srs->srs_state & SRS_PROC)); mac_srs->srs_state |= SRS_PROC; tx_mode = srs_tx->st_mode; if (tx_mode == SRS_TX_DEFAULT || tx_mode == SRS_TX_SERIALIZE) { if (mac_srs->srs_first != NULL) { head = mac_srs->srs_first; tail = mac_srs->srs_last; saved_pkt_count = mac_srs->srs_count; mac_srs->srs_first = NULL; mac_srs->srs_last = NULL; mac_srs->srs_count = 0; mutex_exit(&mac_srs->srs_lock); head = mac_tx_send(srs_tx->st_arg1, srs_tx->st_arg2, head, &stats); mutex_enter(&mac_srs->srs_lock); if (head != NULL) { /* Device out of tx desc, set block */ if (head->b_next == NULL) VERIFY(head == tail); tail->b_next = mac_srs->srs_first; mac_srs->srs_first = head; mac_srs->srs_count += (saved_pkt_count - stats.mts_opackets); if (mac_srs->srs_last == NULL) mac_srs->srs_last = tail; MAC_TX_SRS_BLOCK(mac_srs, head); } else { srs_tx->st_woken_up = B_FALSE; SRS_TX_STATS_UPDATE(mac_srs, &stats); } } } else if (tx_mode == SRS_TX_BW) { /* * We are here because the timer fired and we have some data * to tranmit. Also mac_tx_srs_worker should have reset * SRS_BW_ENFORCED flag */ ASSERT(!(mac_srs->srs_bw->mac_bw_state & SRS_BW_ENFORCED)); head = tail = mac_srs->srs_first; while (mac_srs->srs_first != NULL) { tail = mac_srs->srs_first; tail->b_prev = NULL; mac_srs->srs_first = tail->b_next; if (mac_srs->srs_first == NULL) mac_srs->srs_last = NULL; mac_srs->srs_count--; sz = msgdsize(tail); mac_srs->srs_size -= sz; saved_pkt_count++; MAC_TX_UPDATE_BW_INFO(mac_srs, sz); if (mac_srs->srs_bw->mac_bw_used < mac_srs->srs_bw->mac_bw_limit) continue; now = ddi_get_lbolt(); if (mac_srs->srs_bw->mac_bw_curr_time != now) { mac_srs->srs_bw->mac_bw_curr_time = now; mac_srs->srs_bw->mac_bw_used = sz; continue; } mac_srs->srs_bw->mac_bw_state |= SRS_BW_ENFORCED; break; } ASSERT((head == NULL && tail == NULL) || (head != NULL && tail != NULL)); if (tail != NULL) { tail->b_next = NULL; mutex_exit(&mac_srs->srs_lock); head = mac_tx_send(srs_tx->st_arg1, srs_tx->st_arg2, head, &stats); mutex_enter(&mac_srs->srs_lock); if (head != NULL) { uint_t size_sent; /* Device out of tx desc, set block */ if (head->b_next == NULL) VERIFY(head == tail); tail->b_next = mac_srs->srs_first; mac_srs->srs_first = head; mac_srs->srs_count += (saved_pkt_count - stats.mts_opackets); if (mac_srs->srs_last == NULL) mac_srs->srs_last = tail; size_sent = sz - stats.mts_obytes; mac_srs->srs_size += size_sent; mac_srs->srs_bw->mac_bw_sz += size_sent; if (mac_srs->srs_bw->mac_bw_used > size_sent) { mac_srs->srs_bw->mac_bw_used -= size_sent; } else { mac_srs->srs_bw->mac_bw_used = 0; } MAC_TX_SRS_BLOCK(mac_srs, head); } else { srs_tx->st_woken_up = B_FALSE; SRS_TX_STATS_UPDATE(mac_srs, &stats); } } } else if (tx_mode == SRS_TX_BW_FANOUT || tx_mode == SRS_TX_BW_AGGR) { mblk_t *prev; uint64_t hint; /* * We are here because the timer fired and we * have some quota to tranmit. */ prev = NULL; head = tail = mac_srs->srs_first; while (mac_srs->srs_first != NULL) { tail = mac_srs->srs_first; mac_srs->srs_first = tail->b_next; if (mac_srs->srs_first == NULL) mac_srs->srs_last = NULL; mac_srs->srs_count--; sz = msgdsize(tail); mac_srs->srs_size -= sz; mac_srs->srs_bw->mac_bw_used += sz; if (prev == NULL) hint = (ulong_t)tail->b_prev; if (hint != (ulong_t)tail->b_prev) { prev->b_next = NULL; mutex_exit(&mac_srs->srs_lock); TX_SRS_TO_SOFT_RING(mac_srs, head, hint); head = tail; hint = (ulong_t)tail->b_prev; mutex_enter(&mac_srs->srs_lock); } prev = tail; tail->b_prev = NULL; if (mac_srs->srs_bw->mac_bw_used < mac_srs->srs_bw->mac_bw_limit) continue; now = ddi_get_lbolt(); if (mac_srs->srs_bw->mac_bw_curr_time != now) { mac_srs->srs_bw->mac_bw_curr_time = now; mac_srs->srs_bw->mac_bw_used = 0; continue; } mac_srs->srs_bw->mac_bw_state |= SRS_BW_ENFORCED; break; } ASSERT((head == NULL && tail == NULL) || (head != NULL && tail != NULL)); if (tail != NULL) { tail->b_next = NULL; mutex_exit(&mac_srs->srs_lock); TX_SRS_TO_SOFT_RING(mac_srs, head, hint); mutex_enter(&mac_srs->srs_lock); } } /* * SRS_TX_FANOUT case not considered here because packets * won't be queued in the SRS for this case. Packets will * be sent directly to soft rings underneath and if there * is any queueing at all, it would be in Tx side soft * rings. */ /* * When srs_count becomes 0, reset SRS_TX_HIWAT and * SRS_TX_WAKEUP_CLIENT and wakeup registered clients. */ if (mac_srs->srs_count == 0 && (mac_srs->srs_state & (SRS_TX_HIWAT | SRS_TX_WAKEUP_CLIENT | SRS_ENQUEUED))) { mac_client_impl_t *mcip = mac_srs->srs_mcip; boolean_t wakeup_required = B_FALSE; if (mac_srs->srs_state & (SRS_TX_HIWAT|SRS_TX_WAKEUP_CLIENT)) { wakeup_required = B_TRUE; } mac_srs->srs_state &= ~(SRS_TX_HIWAT | SRS_TX_WAKEUP_CLIENT | SRS_ENQUEUED); mutex_exit(&mac_srs->srs_lock); if (wakeup_required) { mac_tx_invoke_callbacks(mcip, (mac_tx_cookie_t)mac_srs); /* * If the client is not the primary MAC client, then we * need to send the notification to the clients upper * MAC, i.e. mci_upper_mip. */ mac_tx_notify(mcip->mci_upper_mip != NULL ? mcip->mci_upper_mip : mcip->mci_mip); } mutex_enter(&mac_srs->srs_lock); } mac_srs->srs_state &= ~SRS_PROC; } /* * Given a packet, get the flow_entry that identifies the flow * to which that packet belongs. The flow_entry will contain * the transmit function to be used to send the packet. If the * function returns NULL, the packet should be sent using the * underlying NIC. */ static flow_entry_t * mac_tx_classify(mac_impl_t *mip, mblk_t *mp) { flow_entry_t *flent = NULL; mac_client_impl_t *mcip; int err; /* * Do classification on the packet. */ err = mac_flow_lookup(mip->mi_flow_tab, mp, FLOW_OUTBOUND, &flent); if (err != 0) return (NULL); /* * This flent might just be an additional one on the MAC client, * i.e. for classification purposes (different fdesc), however * the resources, SRS et. al., are in the mci_flent, so if * this isn't the mci_flent, we need to get it. */ if ((mcip = flent->fe_mcip) != NULL && mcip->mci_flent != flent) { FLOW_REFRELE(flent); flent = mcip->mci_flent; FLOW_TRY_REFHOLD(flent, err); if (err != 0) return (NULL); } return (flent); } /* * This macro is only meant to be used by mac_tx_send(). */ #define CHECK_VID_AND_ADD_TAG(mp) { \ if (vid_check) { \ int err = 0; \ \ MAC_VID_CHECK(src_mcip, (mp), err); \ if (err != 0) { \ freemsg((mp)); \ (mp) = next; \ oerrors++; \ continue; \ } \ } \ if (add_tag) { \ (mp) = mac_add_vlan_tag((mp), 0, vid); \ if ((mp) == NULL) { \ (mp) = next; \ oerrors++; \ continue; \ } \ } \ } mblk_t * mac_tx_send(mac_client_handle_t mch, mac_ring_handle_t ring, mblk_t *mp_chain, mac_tx_stats_t *stats) { mac_client_impl_t *src_mcip = (mac_client_impl_t *)mch; mac_impl_t *mip = src_mcip->mci_mip; uint_t obytes = 0, opackets = 0, oerrors = 0; mblk_t *mp = NULL, *next; boolean_t vid_check, add_tag; uint16_t vid = 0; if (mip->mi_nclients > 1) { vid_check = MAC_VID_CHECK_NEEDED(src_mcip); add_tag = MAC_TAG_NEEDED(src_mcip); if (add_tag) vid = mac_client_vid(mch); } else { ASSERT(mip->mi_nclients == 1); vid_check = add_tag = B_FALSE; } /* * Fastpath: if there's only one client, we simply send * the packet down to the underlying NIC. */ if (mip->mi_nactiveclients == 1) { DTRACE_PROBE2(fastpath, mac_client_impl_t *, src_mcip, mblk_t *, mp_chain); mp = mp_chain; while (mp != NULL) { next = mp->b_next; mp->b_next = NULL; opackets++; obytes += (mp->b_cont == NULL ? MBLKL(mp) : msgdsize(mp)); CHECK_VID_AND_ADD_TAG(mp); MAC_TX(mip, ring, mp, src_mcip); /* * If the driver is out of descriptors and does a * partial send it will return a chain of unsent * mblks. Adjust the accounting stats. */ if (mp != NULL) { opackets--; obytes -= msgdsize(mp); mp->b_next = next; break; } mp = next; } goto done; } /* * No fastpath, we either have more than one MAC client * defined on top of the same MAC, or one or more MAC * client promiscuous callbacks. */ DTRACE_PROBE3(slowpath, mac_client_impl_t *, src_mcip, int, mip->mi_nclients, mblk_t *, mp_chain); mp = mp_chain; while (mp != NULL) { flow_entry_t *dst_flow_ent; void *flow_cookie; size_t pkt_size; mblk_t *mp1; next = mp->b_next; mp->b_next = NULL; opackets++; pkt_size = (mp->b_cont == NULL ? MBLKL(mp) : msgdsize(mp)); obytes += pkt_size; CHECK_VID_AND_ADD_TAG(mp); /* * Find the destination. */ dst_flow_ent = mac_tx_classify(mip, mp); if (dst_flow_ent != NULL) { size_t hdrsize; int err = 0; if (mip->mi_info.mi_nativemedia == DL_ETHER) { struct ether_vlan_header *evhp = (struct ether_vlan_header *)mp->b_rptr; if (ntohs(evhp->ether_tpid) == ETHERTYPE_VLAN) hdrsize = sizeof (*evhp); else hdrsize = sizeof (struct ether_header); } else { mac_header_info_t mhi; err = mac_header_info((mac_handle_t)mip, mp, &mhi); if (err == 0) hdrsize = mhi.mhi_hdrsize; } /* * Got a matching flow. It's either another * MAC client, or a broadcast/multicast flow. * Make sure the packet size is within the * allowed size. If not drop the packet and * move to next packet. */ if (err != 0 || (pkt_size - hdrsize) > mip->mi_sdu_max) { oerrors++; DTRACE_PROBE2(loopback__drop, size_t, pkt_size, mblk_t *, mp); freemsg(mp); mp = next; FLOW_REFRELE(dst_flow_ent); continue; } flow_cookie = mac_flow_get_client_cookie(dst_flow_ent); if (flow_cookie != NULL) { /* * The vnic_bcast_send function expects * to receive the sender MAC client * as value for arg2. */ mac_bcast_send(flow_cookie, src_mcip, mp, B_TRUE); } else { /* * loopback the packet to a local MAC * client. We force a context switch * if both source and destination MAC * clients are used by IP, i.e. * bypass is set. */ boolean_t do_switch; mac_client_impl_t *dst_mcip = dst_flow_ent->fe_mcip; /* * Check if there are promiscuous mode * callbacks defined. This check is * done here in the 'else' case and * not in other cases because this * path is for local loopback * communication which does not go * through MAC_TX(). For paths that go * through MAC_TX(), the promisc_list * check is done inside the MAC_TX() * macro. */ if (mip->mi_promisc_list != NULL) mac_promisc_dispatch(mip, mp, src_mcip); do_switch = ((src_mcip->mci_state_flags & dst_mcip->mci_state_flags & MCIS_CLIENT_POLL_CAPABLE) != 0); if ((mp1 = mac_fix_cksum(mp)) != NULL) { (dst_flow_ent->fe_cb_fn)( dst_flow_ent->fe_cb_arg1, dst_flow_ent->fe_cb_arg2, mp1, do_switch); } } FLOW_REFRELE(dst_flow_ent); } else { /* * Unknown destination, send via the underlying * NIC. */ MAC_TX(mip, ring, mp, src_mcip); if (mp != NULL) { /* * Adjust for the last packet that * could not be transmitted */ opackets--; obytes -= pkt_size; mp->b_next = next; break; } } mp = next; } done: stats->mts_obytes = obytes; stats->mts_opackets = opackets; stats->mts_oerrors = oerrors; return (mp); } /* * mac_tx_srs_ring_present * * Returns whether the specified ring is part of the specified SRS. */ boolean_t mac_tx_srs_ring_present(mac_soft_ring_set_t *srs, mac_ring_t *tx_ring) { int i; mac_soft_ring_t *soft_ring; if (srs->srs_tx.st_arg2 == tx_ring) return (B_TRUE); for (i = 0; i < srs->srs_tx_ring_count; i++) { soft_ring = srs->srs_tx_soft_rings[i]; if (soft_ring->s_ring_tx_arg2 == tx_ring) return (B_TRUE); } return (B_FALSE); } /* * mac_tx_srs_get_soft_ring * * Returns the TX soft ring associated with the given ring, if present. */ mac_soft_ring_t * mac_tx_srs_get_soft_ring(mac_soft_ring_set_t *srs, mac_ring_t *tx_ring) { int i; mac_soft_ring_t *soft_ring; if (srs->srs_tx.st_arg2 == tx_ring) return (NULL); for (i = 0; i < srs->srs_tx_ring_count; i++) { soft_ring = srs->srs_tx_soft_rings[i]; if (soft_ring->s_ring_tx_arg2 == tx_ring) return (soft_ring); } return (NULL); } /* * mac_tx_srs_wakeup * * Called when Tx desc become available. Wakeup the appropriate worker * thread after resetting the SRS_TX_BLOCKED/S_RING_BLOCK bit in the * state field. */ void mac_tx_srs_wakeup(mac_soft_ring_set_t *mac_srs, mac_ring_handle_t ring) { int i; mac_soft_ring_t *sringp; mac_srs_tx_t *srs_tx = &mac_srs->srs_tx; mutex_enter(&mac_srs->srs_lock); /* * srs_tx_ring_count == 0 is the single ring mode case. In * this mode, there will not be Tx soft rings associated * with the SRS. */ if (!MAC_TX_SOFT_RINGS(mac_srs)) { if (srs_tx->st_arg2 == ring && mac_srs->srs_state & SRS_TX_BLOCKED) { mac_srs->srs_state &= ~SRS_TX_BLOCKED; srs_tx->st_stat.mts_unblockcnt++; cv_signal(&mac_srs->srs_async); } /* * A wakeup can come before tx_srs_drain() could * grab srs lock and set SRS_TX_BLOCKED. So * always set woken_up flag when we come here. */ srs_tx->st_woken_up = B_TRUE; mutex_exit(&mac_srs->srs_lock); return; } /* * If you are here, it is for FANOUT, BW_FANOUT, * AGGR_MODE or AGGR_BW_MODE case */ for (i = 0; i < mac_srs->srs_tx_ring_count; i++) { sringp = mac_srs->srs_tx_soft_rings[i]; mutex_enter(&sringp->s_ring_lock); if (sringp->s_ring_tx_arg2 == ring) { if (sringp->s_ring_state & S_RING_BLOCK) { sringp->s_ring_state &= ~S_RING_BLOCK; sringp->s_st_stat.mts_unblockcnt++; cv_signal(&sringp->s_ring_async); } sringp->s_ring_tx_woken_up = B_TRUE; } mutex_exit(&sringp->s_ring_lock); } mutex_exit(&mac_srs->srs_lock); } /* * Once the driver is done draining, send a MAC_NOTE_TX notification to unleash * the blocked clients again. */ void mac_tx_notify(mac_impl_t *mip) { i_mac_notify(mip, MAC_NOTE_TX); } /* * RX SOFTRING RELATED FUNCTIONS * * These functions really belong in mac_soft_ring.c and here for * a short period. */ #define SOFT_RING_ENQUEUE_CHAIN(ringp, mp, tail, cnt, sz) { \ /* \ * Enqueue our mblk chain. \ */ \ ASSERT(MUTEX_HELD(&(ringp)->s_ring_lock)); \ \ if ((ringp)->s_ring_last != NULL) \ (ringp)->s_ring_last->b_next = (mp); \ else \ (ringp)->s_ring_first = (mp); \ (ringp)->s_ring_last = (tail); \ (ringp)->s_ring_count += (cnt); \ ASSERT((ringp)->s_ring_count > 0); \ if ((ringp)->s_ring_type & ST_RING_BW_CTL) { \ (ringp)->s_ring_size += sz; \ } \ } /* * Default entry point to deliver a packet chain to a MAC client. * If the MAC client has flows, do the classification with these * flows as well. */ /* ARGSUSED */ void mac_rx_deliver(void *arg1, mac_resource_handle_t mrh, mblk_t *mp_chain, mac_header_info_t *arg3) { mac_client_impl_t *mcip = arg1; if (mcip->mci_nvids == 1 && !(mcip->mci_state_flags & MCIS_STRIP_DISABLE)) { /* * If the client has exactly one VID associated with it * and striping of VLAN header is not disabled, * remove the VLAN tag from the packet before * passing it on to the client's receive callback. * Note that this needs to be done after we dispatch * the packet to the promiscuous listeners of the * client, since they expect to see the whole * frame including the VLAN headers. */ mp_chain = mac_strip_vlan_tag_chain(mp_chain); } mcip->mci_rx_fn(mcip->mci_rx_arg, mrh, mp_chain, B_FALSE); } /* * mac_rx_soft_ring_process * * process a chain for a given soft ring. The number of packets queued * in the SRS and its associated soft rings (including this one) is * very small (tracked by srs_poll_pkt_cnt), then allow the entering * thread (interrupt or poll thread) to do inline processing. This * helps keep the latency down under low load. * * The proc and arg for each mblk is already stored in the mblk in * appropriate places. */ /* ARGSUSED */ void mac_rx_soft_ring_process(mac_client_impl_t *mcip, mac_soft_ring_t *ringp, mblk_t *mp_chain, mblk_t *tail, int cnt, size_t sz) { mac_direct_rx_t proc; void *arg1; mac_resource_handle_t arg2; mac_soft_ring_set_t *mac_srs = ringp->s_ring_set; ASSERT(ringp != NULL); ASSERT(mp_chain != NULL); ASSERT(tail != NULL); ASSERT(MUTEX_NOT_HELD(&ringp->s_ring_lock)); mutex_enter(&ringp->s_ring_lock); ringp->s_ring_total_inpkt += cnt; ringp->s_ring_total_rbytes += sz; if ((mac_srs->srs_rx.sr_poll_pkt_cnt <= 1) && !(ringp->s_ring_type & ST_RING_WORKER_ONLY)) { /* If on processor or blanking on, then enqueue and return */ if (ringp->s_ring_state & S_RING_BLANK || ringp->s_ring_state & S_RING_PROC) { SOFT_RING_ENQUEUE_CHAIN(ringp, mp_chain, tail, cnt, sz); mutex_exit(&ringp->s_ring_lock); return; } proc = ringp->s_ring_rx_func; arg1 = ringp->s_ring_rx_arg1; arg2 = ringp->s_ring_rx_arg2; /* * See if anything is already queued. If we are the * first packet, do inline processing else queue the * packet and do the drain. */ if (ringp->s_ring_first == NULL) { /* * Fast-path, ok to process and nothing queued. */ ringp->s_ring_run = curthread; ringp->s_ring_state |= (S_RING_PROC); mutex_exit(&ringp->s_ring_lock); /* * We are the chain of 1 packet so * go through this fast path. */ ASSERT(mp_chain->b_next == NULL); (*proc)(arg1, arg2, mp_chain, NULL); ASSERT(MUTEX_NOT_HELD(&ringp->s_ring_lock)); /* * If we have a soft ring set which is doing * bandwidth control, we need to decrement * srs_size and count so it the SRS can have a * accurate idea of what is the real data * queued between SRS and its soft rings. We * decrement the counters only when the packet * gets processed by both SRS and the soft ring. */ mutex_enter(&mac_srs->srs_lock); MAC_UPDATE_SRS_COUNT_LOCKED(mac_srs, cnt); MAC_UPDATE_SRS_SIZE_LOCKED(mac_srs, sz); mutex_exit(&mac_srs->srs_lock); mutex_enter(&ringp->s_ring_lock); ringp->s_ring_run = NULL; ringp->s_ring_state &= ~S_RING_PROC; if (ringp->s_ring_state & S_RING_CLIENT_WAIT) cv_signal(&ringp->s_ring_client_cv); if ((ringp->s_ring_first == NULL) || (ringp->s_ring_state & S_RING_BLANK)) { /* * We processed inline our packet and * nothing new has arrived or our * receiver doesn't want to receive * any packets. We are done. */ mutex_exit(&ringp->s_ring_lock); return; } } else { SOFT_RING_ENQUEUE_CHAIN(ringp, mp_chain, tail, cnt, sz); } /* * We are here because either we couldn't do inline * processing (because something was already * queued), or we had a chain of more than one * packet, or something else arrived after we were * done with inline processing. */ ASSERT(MUTEX_HELD(&ringp->s_ring_lock)); ASSERT(ringp->s_ring_first != NULL); ringp->s_ring_drain_func(ringp); mutex_exit(&ringp->s_ring_lock); return; } else { /* ST_RING_WORKER_ONLY case */ SOFT_RING_ENQUEUE_CHAIN(ringp, mp_chain, tail, cnt, sz); mac_soft_ring_worker_wakeup(ringp); mutex_exit(&ringp->s_ring_lock); } } /* * TX SOFTRING RELATED FUNCTIONS * * These functions really belong in mac_soft_ring.c and here for * a short period. */ #define TX_SOFT_RING_ENQUEUE_CHAIN(ringp, mp, tail, cnt, sz) { \ ASSERT(MUTEX_HELD(&ringp->s_ring_lock)); \ ringp->s_ring_state |= S_RING_ENQUEUED; \ SOFT_RING_ENQUEUE_CHAIN(ringp, mp_chain, tail, cnt, sz); \ } /* * mac_tx_sring_queued * * When we are out of transmit descriptors and we already have a * queue that exceeds hiwat (or the client called us with * MAC_TX_NO_ENQUEUE or MAC_DROP_ON_NO_DESC flag), return the * soft ring pointer as the opaque cookie for the client enable * flow control. */ static mac_tx_cookie_t mac_tx_sring_enqueue(mac_soft_ring_t *ringp, mblk_t *mp_chain, uint16_t flag, mblk_t **ret_mp) { int cnt; size_t sz; mblk_t *tail; mac_soft_ring_set_t *mac_srs = ringp->s_ring_set; mac_tx_cookie_t cookie = NULL; boolean_t wakeup_worker = B_TRUE; ASSERT(MUTEX_HELD(&ringp->s_ring_lock)); MAC_COUNT_CHAIN(mac_srs, mp_chain, tail, cnt, sz); if (flag & MAC_DROP_ON_NO_DESC) { mac_pkt_drop(NULL, NULL, mp_chain, B_FALSE); /* increment freed stats */ ringp->s_ring_drops += cnt; cookie = (mac_tx_cookie_t)ringp; } else { if (ringp->s_ring_first != NULL) wakeup_worker = B_FALSE; if (flag & MAC_TX_NO_ENQUEUE) { /* * If QUEUED is not set, queue the packet * and let mac_tx_soft_ring_drain() set * the TX_BLOCKED bit for the reasons * explained above. Otherwise, return the * mblks. */ if (wakeup_worker) { TX_SOFT_RING_ENQUEUE_CHAIN(ringp, mp_chain, tail, cnt, sz); } else { ringp->s_ring_state |= S_RING_WAKEUP_CLIENT; cookie = (mac_tx_cookie_t)ringp; *ret_mp = mp_chain; } } else { boolean_t enqueue = B_TRUE; if (ringp->s_ring_count > ringp->s_ring_tx_hiwat) { /* * flow-controlled. Store ringp in cookie * so that it can be returned as * mac_tx_cookie_t to client */ ringp->s_ring_state |= S_RING_TX_HIWAT; cookie = (mac_tx_cookie_t)ringp; ringp->s_ring_hiwat_cnt++; if (ringp->s_ring_count > ringp->s_ring_tx_max_q_cnt) { /* increment freed stats */ ringp->s_ring_drops += cnt; /* * b_prev may be set to the fanout hint * hence can't use freemsg directly */ mac_pkt_drop(NULL, NULL, mp_chain, B_FALSE); DTRACE_PROBE1(tx_queued_hiwat, mac_soft_ring_t *, ringp); enqueue = B_FALSE; } } if (enqueue) { TX_SOFT_RING_ENQUEUE_CHAIN(ringp, mp_chain, tail, cnt, sz); } } if (wakeup_worker) cv_signal(&ringp->s_ring_async); } return (cookie); } /* * mac_tx_soft_ring_process * * This routine is called when fanning out outgoing traffic among * multipe Tx rings. * Note that a soft ring is associated with a h/w Tx ring. */ mac_tx_cookie_t mac_tx_soft_ring_process(mac_soft_ring_t *ringp, mblk_t *mp_chain, uint16_t flag, mblk_t **ret_mp) { mac_soft_ring_set_t *mac_srs = ringp->s_ring_set; int cnt; size_t sz; mblk_t *tail; mac_tx_cookie_t cookie = NULL; ASSERT(ringp != NULL); ASSERT(mp_chain != NULL); ASSERT(MUTEX_NOT_HELD(&ringp->s_ring_lock)); /* * The following modes can come here: SRS_TX_BW_FANOUT, * SRS_TX_FANOUT, SRS_TX_AGGR, SRS_TX_BW_AGGR. */ ASSERT(MAC_TX_SOFT_RINGS(mac_srs)); ASSERT(mac_srs->srs_tx.st_mode == SRS_TX_FANOUT || mac_srs->srs_tx.st_mode == SRS_TX_BW_FANOUT || mac_srs->srs_tx.st_mode == SRS_TX_AGGR || mac_srs->srs_tx.st_mode == SRS_TX_BW_AGGR); if (ringp->s_ring_type & ST_RING_WORKER_ONLY) { /* Serialization mode */ mutex_enter(&ringp->s_ring_lock); if (ringp->s_ring_count > ringp->s_ring_tx_hiwat) { cookie = mac_tx_sring_enqueue(ringp, mp_chain, flag, ret_mp); mutex_exit(&ringp->s_ring_lock); return (cookie); } MAC_COUNT_CHAIN(mac_srs, mp_chain, tail, cnt, sz); TX_SOFT_RING_ENQUEUE_CHAIN(ringp, mp_chain, tail, cnt, sz); if (ringp->s_ring_state & (S_RING_BLOCK | S_RING_PROC)) { /* * If ring is blocked due to lack of Tx * descs, just return. Worker thread * will get scheduled when Tx desc's * become available. */ mutex_exit(&ringp->s_ring_lock); return (cookie); } mac_soft_ring_worker_wakeup(ringp); mutex_exit(&ringp->s_ring_lock); return (cookie); } else { /* Default fanout mode */ /* * S_RING_BLOCKED is set when underlying NIC runs * out of Tx descs and messages start getting * queued. It won't get reset until * tx_srs_drain() completely drains out the * messages. */ mac_tx_stats_t stats; if (ringp->s_ring_state & S_RING_ENQUEUED) { /* Tx descs/resources not available */ mutex_enter(&ringp->s_ring_lock); if (ringp->s_ring_state & S_RING_ENQUEUED) { cookie = mac_tx_sring_enqueue(ringp, mp_chain, flag, ret_mp); mutex_exit(&ringp->s_ring_lock); return (cookie); } /* * While we were computing mblk count, the * flow control condition got relieved. * Continue with the transmission. */ mutex_exit(&ringp->s_ring_lock); } mp_chain = mac_tx_send(ringp->s_ring_tx_arg1, ringp->s_ring_tx_arg2, mp_chain, &stats); /* * Multiple threads could be here sending packets. * Under such conditions, it is not possible to * automically set S_RING_BLOCKED bit to indicate * out of tx desc condition. To atomically set * this, we queue the returned packet and do * the setting of S_RING_BLOCKED in * mac_tx_soft_ring_drain(). */ if (mp_chain != NULL) { mutex_enter(&ringp->s_ring_lock); cookie = mac_tx_sring_enqueue(ringp, mp_chain, flag, ret_mp); mutex_exit(&ringp->s_ring_lock); return (cookie); } SRS_TX_STATS_UPDATE(mac_srs, &stats); SOFTRING_TX_STATS_UPDATE(ringp, &stats); return (NULL); } }