/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* Copyright (c) 1990, 1991 UNIX System Laboratories, Inc. */ /* Copyright (c) 1984, 1986, 1987, 1988, 1989, 1990 AT&T */ /* All Rights Reserved */ /* * Copyright 2008 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include "sys/consdev.h" #include #include #include "kb8042.h" #include #include "sys/kbio.h" /* for KIOCSLAYOUT */ #include "sys/stat.h" #include "sys/reboot.h" #include #include #include /* * For any keyboard, there is a unique code describing the position * of the key on a keyboard. We refer to the code as "station number". * The following table is used to map the station numbers from ps2 * AT/XT keyboards to that of a USB one. * * A mapping was added for entry K8042_STOP, to map to USB key code 120 (which * maps to the STOP key) when in KB_USB mode, and maps to a HOLE entry * when in KB_PC mode. Note that this does not need to be made conditional * on the architecture for which this module is complied because there are no * keys that map to K8042_STOP on non-SPARC platforms. */ static kbtrans_key_t keytab_pc2usb[KBTRANS_KEYNUMS_MAX] = { /* 0 */ 0, 53, 30, 31, 32, 33, 34, 35, /* 8 */ 36, 37, 38, 39, 45, 46, 137, 42, /* 16 */ 43, 20, 26, 8, 21, 23, 28, 24, /* 24 */ 12, 18, 19, 47, 48, 49, 57, 4, /* 32 */ 22, 7, 9, 10, 11, 13, 14, 15, /* 40 */ 51, 52, 50, 40, 225, 100, 29, 27, /* 48 */ 6, 25, 5, 17, 16, 54, 55, 56, /* 56 */ 135, 229, 224, 227, 226, 44, 230, 231, /* 64 */ 228, 101, 0, 0, 0, 0, 0, 0, /* 72 */ 0, 0, 0, 73, 76, 0, 0, 80, /* 80 */ 74, 77, 0, 82, 81, 75, 78, 0, /* 88 */ 0, 79, 83, 95, 92, 89, 0, 84, /* 96 */ 96, 93, 90, 98, 85, 97, 94, 91, /* 104 */ 99, 86, 87, 133, 88, 0, 41, 0, /* 112 */ 58, 59, 60, 61, 62, 63, 64, 65, /* 120 */ 66, 67, 68, 69, 70, 71, 72, 0, /* 128 */ 0, 0, 0, 139, 138, 136, 0, 0, /* 136 */ 0, 0, 0, 0, 0, 0, 0, 0, /* 144 */ 0, 0, 0, 0, 0, 0, 0, 0, /* 152 */ 0, 0, 0, 0, 0, 0, 0, 0, /* 160 */ 120, 0, 0, 0, 0, 0, 0, 0, /* 168 */ 0, 0, 0, 0, 0, 0, 0, 0, /* 176 */ 0, 0, 0, 0, 0, 0, 0, 0, /* 184 */ 0, 0, 0, 0, 0, 0, 0, 0, /* 192 */ 0, 0, 0, 0, 0, 0, 0, 0, /* 200 */ 0, 0, 0, 0, 0, 0, 0, 0, /* 208 */ 0, 0, 0, 0, 0, 0, 0, 0, /* 216 */ 0, 0, 0, 0, 0, 0, 0, 0, /* 224 */ 0, 0, 0, 0, 0, 0, 0, 0, /* 232 */ 0, 0, 0, 0, 0, 0, 0, 0, /* 240 */ 0, 0, 0, 0, 0, 0, 0, 0, /* 248 */ 0, 0, 0, 0 }; /* * DEBUG (or KD_DEBUG for just this module) turns on a flag called * kb8042_enable_debug_hotkey. If kb8042_enable_debug_hotkey is true, * then the following hotkeys are enabled: * F10 - turn on debugging "normal" translations * F9 - turn on debugging "getchar" translations * F8 - turn on "low level" debugging * F7 - turn on terse press/release debugging * F1 - turn off all debugging * The default value for kb8042_enable_debug_hotkey is false, disabling * these hotkeys. */ #if defined(DEBUG) || defined(lint) #define KD_DEBUG #endif #ifdef KD_DEBUG boolean_t kb8042_enable_debug_hotkey = B_FALSE; boolean_t kb8042_debug = B_FALSE; boolean_t kb8042_getchar_debug = B_FALSE; boolean_t kb8042_low_level_debug = B_FALSE; boolean_t kb8042_pressrelease_debug = B_FALSE; static void kb8042_debug_hotkey(int scancode); #endif #ifdef __sparc #define USECS_PER_WAIT 100 #define MAX_WAIT_USECS 100000 /* in usecs = 100 ms */ #define MIN_DELAY_USECS USECS_PER_WAIT boolean_t kb8042_warn_unknown_scanset = B_TRUE; int kb8042_default_scanset = 2; #endif enum state_return { STATE_NORMAL, STATE_INTERNAL }; static void kb8042_init(struct kb8042 *kb8042, boolean_t from_resume); static uint_t kb8042_intr(caddr_t arg); static void kb8042_wait_poweron(struct kb8042 *kb8042); static void kb8042_send_to_keyboard(struct kb8042 *, int, boolean_t); static int kb8042_xlate_leds(int); static void kb8042_setled(struct kb8042 *, int led_state, boolean_t polled); static void kb8042_streams_setled(struct kbtrans_hardware *hw, int led_state); static void kb8042_polled_setled(struct kbtrans_hardware *hw, int led_state); static boolean_t kb8042_polled_keycheck( struct kbtrans_hardware *hw, int *key, enum keystate *state); static void kb8042_get_initial_leds(struct kb8042 *, int *, int *); static boolean_t kb8042_autorepeat_detect(struct kb8042 *kb8042, int key_pos, enum keystate state); static void kb8042_type4_cmd(struct kb8042 *kb8042, int cmd); static void kb8042_ioctlmsg(struct kb8042 *kb8042, queue_t *, mblk_t *); static void kb8042_iocdatamsg(queue_t *, mblk_t *); static void kb8042_process_key(struct kb8042 *, kbtrans_key_t, enum keystate); static int kb8042_polled_ischar(cons_polledio_arg_t arg); static int kb8042_polled_getchar(cons_polledio_arg_t arg); static void kb8042_cleanup(struct kb8042 *kb8042); static struct kbtrans_callbacks kb8042_callbacks = { kb8042_streams_setled, kb8042_polled_setled, kb8042_polled_keycheck, }; extern struct keyboard keyindex_pc; #define DRIVER_NAME(dip) ddi_driver_name(dip) static char module_name[] = "kb8042"; static int kb8042_open(queue_t *qp, dev_t *devp, int flag, int sflag, cred_t *credp); static int kb8042_close(queue_t *qp, int flag, cred_t *credp); static int kb8042_wsrv(); struct module_info kb8042_sinfo = { 42, /* Module ID */ module_name, 0, 32, /* Minimum and maximum packet sizes */ 256, 128 /* High and low water marks */ }; static struct qinit kb8042_rinit = { NULL, NULL, kb8042_open, kb8042_close, NULL, &kb8042_sinfo, NULL }; static struct qinit kb8042_winit = { putq, kb8042_wsrv, kb8042_open, kb8042_close, NULL, &kb8042_sinfo, NULL }; struct streamtab kb8042_str_info = { &kb8042_rinit, &kb8042_winit, NULL, NULL }; struct kb8042 Kdws = {0}; static dev_info_t *kb8042_dip = NULL; static int kb8042_getinfo(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg, void **result); static int kb8042_attach(dev_info_t *, ddi_attach_cmd_t); static int kb8042_detach(dev_info_t *, ddi_detach_cmd_t); static struct cb_ops cb_kb8042_ops = { nulldev, /* cb_open */ nulldev, /* cb_close */ nodev, /* cb_strategy */ nodev, /* cb_print */ nodev, /* cb_dump */ nodev, /* cb_read */ nodev, /* cb_write */ nodev, /* cb_ioctl */ nodev, /* cb_devmap */ nodev, /* cb_mmap */ nodev, /* cb_segmap */ nochpoll, /* cb_chpoll */ ddi_prop_op, /* cb_prop_op */ &kb8042_str_info, /* cb_stream */ D_MP }; struct dev_ops kb8042_ops = { DEVO_REV, /* devo_rev */ 0, /* devo_refcnt */ kb8042_getinfo, /* devo_getinfo */ nulldev, /* devo_identify */ nulldev, /* devo_probe */ kb8042_attach, /* devo_attach */ kb8042_detach, /* devo_detach */ nodev, /* devo_reset */ &cb_kb8042_ops, /* devo_cb_ops */ (struct bus_ops *)NULL, /* devo_bus_ops */ NULL, /* devo_power */ ddi_quiesce_not_needed, /* devo_quiesce */ }; /* * This is the loadable module wrapper. */ #include /* * Module linkage information for the kernel. */ static struct modldrv modldrv = { &mod_driverops, /* Type of module. This one is a driver */ "PS/2 keyboard driver", &kb8042_ops, /* driver ops */ }; static struct modlinkage modlinkage = { MODREV_1, (void *) &modldrv, NULL }; int _init(void) { int rv; rv = mod_install(&modlinkage); return (rv); } int _fini(void) { return (mod_remove(&modlinkage)); } int _info(struct modinfo *modinfop) { return (mod_info(&modlinkage, modinfop)); } #ifdef __sparc static boolean_t kb8042_is_input_avail(struct kb8042 *kb8042, int timeout_usec, boolean_t polled) { int i; int port = (polled == B_TRUE) ? I8042_POLL_INPUT_AVAIL : I8042_INT_INPUT_AVAIL; int reps = timeout_usec / USECS_PER_WAIT; for (i = 0; i < reps; i++) { if (ddi_get8(kb8042->handle, kb8042->addr + port) != 0) return (B_TRUE); if (i < (reps - 1)) drv_usecwait(USECS_PER_WAIT); } return (B_FALSE); } static void kb8042_clear_input_buffer(struct kb8042 *kb8042, boolean_t polled) { int port = (polled == B_TRUE) ? I8042_POLL_INPUT_DATA : I8042_INT_INPUT_DATA; while (kb8042_is_input_avail(kb8042, MIN_DELAY_USECS, polled)) { (void) ddi_get8(kb8042->handle, kb8042->addr + port); } } static boolean_t kb8042_send_and_expect(struct kb8042 *kb8042, uint8_t send, uint8_t expect, boolean_t polled, int timeout, int *error, uint8_t *got) { int port = (polled == B_TRUE) ? I8042_POLL_INPUT_DATA : I8042_INT_INPUT_DATA; uint8_t datab; int err; boolean_t rval; kb8042_send_to_keyboard(kb8042, send, polled); if (kb8042_is_input_avail(kb8042, timeout, polled)) { err = 0; datab = ddi_get8(kb8042->handle, kb8042->addr + port); rval = ((datab == expect) ? B_TRUE : B_FALSE); } else { err = EAGAIN; rval = B_FALSE; } if (error != NULL) *error = err; if (got != NULL) *got = datab; return (rval); } static const char * kb8042_error_string(int errcode) { switch (errcode) { case EAGAIN: return ("Timed out"); default: return ("Unknown error"); } } static int kb8042_read_scanset(struct kb8042 *kb8042, boolean_t polled) { int scanset = -1; int port = (polled == B_TRUE) ? I8042_POLL_INPUT_DATA : I8042_INT_INPUT_DATA; int err; uint8_t got; kb8042_clear_input_buffer(kb8042, B_TRUE); /* * Send a "change scan code set" command to the keyboard. * It should respond with an ACK. */ if (kb8042_send_and_expect(kb8042, KB_SET_SCAN, KB_ACK, polled, MAX_WAIT_USECS, &err, &got) != B_TRUE) { goto fail_read_scanset; } /* * Send a 0. The keyboard should ACK the 0, then it should send the * scan code set in use. */ if (kb8042_send_and_expect(kb8042, 0, KB_ACK, polled, MAX_WAIT_USECS, &err, &got) != B_TRUE) { goto fail_read_scanset; } /* * The next input byte from the keyboard should be the scan code * set in use, though some keyboards like to send a few more acks * just for fun, so blow past those to get the keyboard scan code. */ while (kb8042_is_input_avail(kb8042, MAX_WAIT_USECS, B_TRUE) && (scanset = ddi_get8(kb8042->handle, kb8042->addr + port)) == KB_ACK) ; #ifdef KD_DEBUG cmn_err(CE_NOTE, "!Scan code set from keyboard is `%d'.", scanset); #endif return (scanset); fail_read_scanset: #ifdef KD_DEBUG if (err == 0) cmn_err(CE_NOTE, "Could not read current scan set from " "keyboard: %s. (Expected 0x%x, but got 0x%x).", kb8042_error_string(err), KB_ACK, got); else cmn_err(CE_NOTE, "Could not read current scan set from " "keyboard: %s.", kb8042_error_string(err)); #endif return (-1); } #endif static int kb8042_attach(dev_info_t *devi, ddi_attach_cmd_t cmd) { int rc; int scanset; int leds; struct kb8042 *kb8042 = &Kdws; static ddi_device_acc_attr_t attr = { DDI_DEVICE_ATTR_V0, DDI_NEVERSWAP_ACC, DDI_STRICTORDER_ACC, }; switch (cmd) { case DDI_RESUME: leds = kb8042->leds.commanded; kb8042->w_init = 0; kb8042_init(kb8042, B_TRUE); kb8042_setled(kb8042, leds, B_FALSE); mutex_enter(&kb8042->w_hw_mutex); kb8042->suspended = B_FALSE; if (kb8042->w_qp != NULL) { enableok(WR(kb8042->w_qp)); qenable(WR(kb8042->w_qp)); } cv_broadcast(&kb8042->suspend_cv); mutex_exit(&kb8042->w_hw_mutex); return (DDI_SUCCESS); case DDI_ATTACH: if (kb8042_dip != NULL) return (DDI_FAILURE); /* The rest of the function is for attach */ break; default: return (DDI_FAILURE); } kb8042->debugger.mod1 = 58; /* Left Ctrl */ kb8042->debugger.mod2 = 60; /* Left Alt */ kb8042->debugger.trigger = 33; /* D */ kb8042->debugger.mod1_down = B_FALSE; kb8042->debugger.mod2_down = B_FALSE; kb8042->debugger.enabled = B_FALSE; kb8042_dip = devi; kb8042->init_state = KB8042_UNINITIALIZED; kb8042->polled_synthetic_release_pending = B_FALSE; if (ddi_create_minor_node(devi, module_name, S_IFCHR, 0, DDI_NT_KEYBOARD, 0) == DDI_FAILURE) { goto failure; } kb8042->init_state |= KB8042_MINOR_NODE_CREATED; rc = ddi_regs_map_setup(devi, 0, (caddr_t *)&kb8042->addr, (offset_t)0, (offset_t)0, &attr, &kb8042->handle); if (rc != DDI_SUCCESS) { #if defined(KD_DEBUG) cmn_err(CE_WARN, "kb8042_attach: can't map registers"); #endif goto failure; } kb8042->init_state |= KB8042_REGS_MAPPED; if (ddi_get_iblock_cookie(devi, 0, &kb8042->w_iblock) != DDI_SUCCESS) { cmn_err(CE_WARN, "kb8042_attach: Can't get iblock cookie"); goto failure; } mutex_init(&kb8042->w_hw_mutex, NULL, MUTEX_DRIVER, kb8042->w_iblock); cv_init(&kb8042->ops_cv, NULL, CV_DRIVER, NULL); cv_init(&kb8042->suspend_cv, NULL, CV_DRIVER, NULL); kb8042->init_state |= KB8042_HW_MUTEX_INITTED; kb8042_init(kb8042, B_FALSE); #ifdef __sparc /* Detect the scan code set currently in use */ scanset = kb8042_read_scanset(kb8042, B_TRUE); if (scanset < 0 && kb8042_warn_unknown_scanset) { cmn_err(CE_WARN, "Cannot determine keyboard scan code set "); cmn_err(CE_CONT, "(is the keyboard plugged in?). "); cmn_err(CE_CONT, "Defaulting to scan code set %d. If the " "keyboard does not ", kb8042_default_scanset); cmn_err(CE_CONT, "work properly, add " "`set kb8042:kb8042_default_scanset=%d' to /etc/system ", (kb8042_default_scanset == 1) ? 2 : 1); cmn_err(CE_CONT, "(via network or with a USB keyboard) and " "restart the system. If you "); cmn_err(CE_CONT, "do not want to see this message in the " "future, add "); cmn_err(CE_CONT, "`set kb8042:kb8042_warn_unknown_scanset=0' " "to /etc/system.\n"); /* Use the default scan code set. */ scanset = kb8042_default_scanset; } #else /* x86 systems use scan code set 1 -- no detection required */ scanset = 1; #endif if (KeyboardConvertScan_init(kb8042, scanset) != DDI_SUCCESS) { cmn_err(CE_WARN, "Cannot initialize keyboard scan converter: " "Unknown scan code set `%d'.", scanset); /* Scan code set is not supported */ goto failure; } /* * Turn on interrupts... */ if (ddi_add_intr(devi, 0, &kb8042->w_iblock, (ddi_idevice_cookie_t *)NULL, kb8042_intr, (caddr_t)kb8042) != DDI_SUCCESS) { cmn_err(CE_WARN, "kb8042_attach: cannot add interrupt"); goto failure; } kb8042->init_state |= KB8042_INTR_ADDED; ddi_report_dev(devi); #ifdef KD_DEBUG cmn_err(CE_CONT, "?%s instance #%d READY\n", DRIVER_NAME(devi), ddi_get_instance(devi)); #endif return (DDI_SUCCESS); failure: kb8042_cleanup(kb8042); return (DDI_FAILURE); } static int kb8042_detach(dev_info_t *dip, ddi_detach_cmd_t cmd) { struct kb8042 *kb8042 = &Kdws; switch (cmd) { case DDI_SUSPEND: mutex_enter(&kb8042->w_hw_mutex); ASSERT(kb8042->ops >= 0); while (kb8042->ops > 0) cv_wait(&kb8042->ops_cv, &kb8042->w_hw_mutex); kb8042->suspended = B_TRUE; mutex_exit(&kb8042->w_hw_mutex); return (DDI_SUCCESS); case DDI_DETACH: /* If someone has a stream open, fail to detach */ if (kb8042->w_qp != NULL) return (DDI_FAILURE); ASSERT(kb8042_dip == dip); kb8042_cleanup(kb8042); return (DDI_SUCCESS); default: return (DDI_FAILURE); } } /*ARGSUSED*/ static int kb8042_getinfo( dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg, void **result) { register int error; switch (infocmd) { case DDI_INFO_DEVT2DEVINFO: if (kb8042_dip == NULL) { error = DDI_FAILURE; } else { *result = (void *) kb8042_dip; error = DDI_SUCCESS; } break; case DDI_INFO_DEVT2INSTANCE: *result = (void *)0; error = DDI_SUCCESS; break; default: error = DDI_FAILURE; break; } return (error); } static void kb8042_cleanup(struct kb8042 *kb8042) { ASSERT(kb8042_dip != NULL); if (kb8042->init_state & KB8042_HW_MUTEX_INITTED) { cv_destroy(&kb8042->suspend_cv); cv_destroy(&kb8042->ops_cv); mutex_destroy(&kb8042->w_hw_mutex); } if (kb8042->init_state & KB8042_INTR_ADDED) ddi_remove_intr(kb8042_dip, 0, kb8042->w_iblock); if (kb8042->init_state & KB8042_REGS_MAPPED) ddi_regs_map_free(&kb8042->handle); if (kb8042->init_state & KB8042_MINOR_NODE_CREATED) ddi_remove_minor_node(kb8042_dip, NULL); kb8042->init_state = KB8042_UNINITIALIZED; kb8042_dip = NULL; } static void kb8042_init(struct kb8042 *kb8042, boolean_t from_resume) { if (kb8042->w_init) return; if (!from_resume) { kb8042->w_kblayout = 0; /* Default to US */ kb8042->w_qp = (queue_t *)NULL; kb8042->simulated_kbd_type = KB_PC; kb8042->leds.commanded = -1; /* Unknown initial state */ kb8042->leds.desired = -1; /* Unknown initial state */ } kb8042_wait_poweron(kb8042); kb8042->kb_old_key_pos = 0; /* Set up the command state machine and start it running. */ kb8042_send_to_keyboard(kb8042, KB_ENABLE, B_FALSE); kb8042->w_init++; (void) drv_setparm(SYSRINT, 1); /* reset keyboard interrupts */ } /*ARGSUSED2*/ static int kb8042_open(queue_t *qp, dev_t *devp, int flag, int sflag, cred_t *credp) { struct kb8042 *kb8042; int err; int initial_leds; int initial_led_mask; kb8042 = &Kdws; mutex_enter(&kb8042->w_hw_mutex); while (kb8042->suspended) { if (cv_wait_sig(&kb8042->suspend_cv, &kb8042->w_hw_mutex) == 0) { mutex_exit(&kb8042->w_hw_mutex); return (EINTR); } } kb8042->w_dev = *devp; if (qp->q_ptr) { mutex_exit(&kb8042->w_hw_mutex); return (0); } qp->q_ptr = (caddr_t)kb8042; WR(qp)->q_ptr = qp->q_ptr; if (!kb8042->w_qp) kb8042->w_qp = qp; ASSERT(kb8042->ops >= 0); kb8042->ops++; mutex_exit(&kb8042->w_hw_mutex); kb8042_get_initial_leds(kb8042, &initial_leds, &initial_led_mask); err = kbtrans_streams_init(qp, sflag, credp, (struct kbtrans_hardware *)kb8042, &kb8042_callbacks, &kb8042->hw_kbtrans, initial_leds, initial_led_mask); if (err != 0) return (err); kbtrans_streams_set_keyboard(kb8042->hw_kbtrans, KB_PC, &keyindex_pc); kb8042->polledio.cons_polledio_version = CONSPOLLEDIO_V1; kb8042->polledio.cons_polledio_argument = (cons_polledio_arg_t)kb8042; kb8042->polledio.cons_polledio_putchar = NULL; kb8042->polledio.cons_polledio_getchar = (int (*)(cons_polledio_arg_t))kb8042_polled_getchar; kb8042->polledio.cons_polledio_ischar = (boolean_t (*)(cons_polledio_arg_t))kb8042_polled_ischar; kb8042->polledio.cons_polledio_enter = NULL; kb8042->polledio.cons_polledio_exit = NULL; kb8042->polledio.cons_polledio_setled = (void (*)(cons_polledio_arg_t, int))kb8042_polled_setled; kb8042->polledio.cons_polledio_keycheck = (boolean_t (*)(cons_polledio_arg_t, int *, enum keystate *))kb8042_polled_keycheck; qprocson(qp); kbtrans_streams_enable(kb8042->hw_kbtrans); mutex_enter(&kb8042->w_hw_mutex); ASSERT(kb8042->ops > 0); kb8042->ops--; if (kb8042->ops == 0) cv_broadcast(&kb8042->ops_cv); mutex_exit(&kb8042->w_hw_mutex); return (0); } /*ARGSUSED1*/ static int kb8042_close(queue_t *qp, int flag, cred_t *credp) { struct kb8042 *kb8042; /* If a beep is in progress, stop that */ (void) beeper_off(); kb8042 = (struct kb8042 *)qp->q_ptr; mutex_enter(&kb8042->w_hw_mutex); while (kb8042->suspended) { if (cv_wait_sig(&kb8042->suspend_cv, &kb8042->w_hw_mutex) == 0) { mutex_exit(&kb8042->w_hw_mutex); return (EINTR); } } ASSERT(kb8042->ops >= 0); kb8042->ops++; mutex_exit(&kb8042->w_hw_mutex); (void) kbtrans_streams_fini(kb8042->hw_kbtrans); kb8042->w_qp = (queue_t *)NULL; qprocsoff(qp); mutex_enter(&kb8042->w_hw_mutex); ASSERT(kb8042->ops > 0); kb8042->ops--; if (kb8042->ops == 0) cv_broadcast(&kb8042->ops_cv); mutex_exit(&kb8042->w_hw_mutex); return (0); } static int kb8042_wsrv(queue_t *qp) { struct kb8042 *kb8042; mblk_t *mp; boolean_t suspended; kb8042 = (struct kb8042 *)qp->q_ptr; mutex_enter(&kb8042->w_hw_mutex); suspended = kb8042->suspended; ASSERT(kb8042->ops >= 0); if (!suspended) kb8042->ops++; mutex_exit(&kb8042->w_hw_mutex); #ifdef NO_KB_DEBUG while (!suspended && (mp = getq(qp)) != NULL) { #else /* * Not taking keyboard input while suspending can make debugging * difficult. However, we still do the ops counting so that we * don't suspend at a bad time. */ while ((mp = getq(qp))) { #endif switch (kbtrans_streams_message(kb8042->hw_kbtrans, mp)) { case KBTRANS_MESSAGE_HANDLED: continue; case KBTRANS_MESSAGE_NOT_HANDLED: break; } switch (mp->b_datap->db_type) { case M_IOCTL: kb8042_ioctlmsg(kb8042, qp, mp); continue; case M_IOCDATA: kb8042_iocdatamsg(qp, mp); continue; case M_DELAY: case M_STARTI: case M_STOPI: case M_READ: /* ignore, no buffered data */ freemsg(mp); continue; case M_FLUSH: *mp->b_rptr &= ~FLUSHW; if (*mp->b_rptr & FLUSHR) qreply(qp, mp); else freemsg(mp); continue; default: cmn_err(CE_NOTE, "kb8042_wsrv: bad msg %x", mp->b_datap->db_type); freemsg(mp); continue; } } mutex_enter(&kb8042->w_hw_mutex); if (!suspended) { ASSERT(kb8042->ops > 0); kb8042->ops--; if (kb8042->ops == 0) cv_broadcast(&kb8042->ops_cv); } mutex_exit(&kb8042->w_hw_mutex); return (0); } static void kb8042_ioctlmsg(struct kb8042 *kb8042, queue_t *qp, mblk_t *mp) { struct iocblk *iocp; mblk_t *datap; int error; int tmp; int cycles; int frequency; int msecs; iocp = (struct iocblk *)mp->b_rptr; switch (iocp->ioc_cmd) { case CONSOPENPOLLEDIO: error = miocpullup(mp, sizeof (struct cons_polledio *)); if (error != 0) { miocnak(qp, mp, 0, error); return; } /* * We are given an appropriate-sized data block, * and return a pointer to our structure in it. */ *(struct cons_polledio **)mp->b_cont->b_rptr = &kb8042->polledio; mp->b_datap->db_type = M_IOCACK; iocp->ioc_error = 0; qreply(qp, mp); break; case CONSCLOSEPOLLEDIO: miocack(qp, mp, 0, 0); break; case CONSSETABORTENABLE: if (iocp->ioc_count != TRANSPARENT) { miocnak(qp, mp, 0, EINVAL); return; } kb8042->debugger.enabled = *(intptr_t *)mp->b_cont->b_rptr; miocack(qp, mp, 0, 0); break; /* * Valid only in TR_UNTRANS_MODE mode. */ case CONSSETKBDTYPE: error = miocpullup(mp, sizeof (int)); if (error != 0) { miocnak(qp, mp, 0, error); return; } tmp = *(int *)mp->b_cont->b_rptr; if (tmp != KB_PC && tmp != KB_USB) { miocnak(qp, mp, 0, EINVAL); break; } kb8042->simulated_kbd_type = tmp; miocack(qp, mp, 0, 0); break; case KIOCLAYOUT: if (kb8042->w_kblayout == -1) { miocnak(qp, mp, 0, EINVAL); return; } if ((datap = allocb(sizeof (int), BPRI_HI)) == NULL) { miocnak(qp, mp, 0, ENOMEM); return; } if (kb8042->simulated_kbd_type == KB_USB) *(int *)datap->b_wptr = KBTRANS_USBKB_DEFAULT_LAYOUT; else *(int *)datap->b_wptr = kb8042->w_kblayout; datap->b_wptr += sizeof (int); if (mp->b_cont) freemsg(mp->b_cont); mp->b_cont = datap; iocp->ioc_count = sizeof (int); mp->b_datap->db_type = M_IOCACK; iocp->ioc_error = 0; qreply(qp, mp); break; case KIOCSLAYOUT: if (iocp->ioc_count != TRANSPARENT) { miocnak(qp, mp, 0, EINVAL); return; } kb8042->w_kblayout = *(intptr_t *)mp->b_cont->b_rptr; miocack(qp, mp, 0, 0); break; case KIOCCMD: error = miocpullup(mp, sizeof (int)); if (error != 0) { miocnak(qp, mp, 0, error); return; } kb8042_type4_cmd(kb8042, *(int *)mp->b_cont->b_rptr); miocack(qp, mp, 0, 0); break; case KIOCMKTONE: if (iocp->ioc_count != TRANSPARENT) { miocnak(qp, mp, 0, EINVAL); return; } tmp = (int)(*(intptr_t *)mp->b_cont->b_rptr); cycles = tmp & 0xffff; msecs = (tmp >> 16) & 0xffff; if (cycles == 0) frequency = UINT16_MAX; else if (cycles == UINT16_MAX) frequency = 0; else { frequency = (PIT_HZ + cycles / 2) / cycles; if (frequency > UINT16_MAX) frequency = UINT16_MAX; } error = beep_mktone(frequency, msecs); if (error != 0) miocnak(qp, mp, 0, error); else miocack(qp, mp, 0, 0); break; default: #ifdef DEBUG1 cmn_err(CE_NOTE, "!kb8042_ioctlmsg %x", iocp->ioc_cmd); #endif miocnak(qp, mp, 0, EINVAL); return; } } /* * Process a byte received from the keyboard */ static void kb8042_received_byte( struct kb8042 *kb8042, int scancode) /* raw scan code */ { boolean_t legit; /* is this a legit key pos'n? */ int key_pos = -1; enum keystate state; boolean_t synthetic_release_needed; #ifdef KD_DEBUG kb8042_debug_hotkey(scancode); #endif if (!kb8042->w_init) /* can't do anything anyway */ return; legit = KeyboardConvertScan(kb8042, scancode, &key_pos, &state, &synthetic_release_needed); if (legit == 0) { /* Eaten by translation */ #ifdef KD_DEBUG if (kb8042_debug) prom_printf("kb8042_intr: 0x%x -> ignored\n", scancode); #endif return; } #ifdef KD_DEBUG if (kb8042_debug) { prom_printf("kb8042_intr: 0x%x -> %s %d", scancode, state == KEY_RELEASED ? "released" : "pressed", key_pos); } #endif /* * Don't know if we want this permanently, but it seems interesting * for the moment. */ if (key_pos == kb8042->debugger.mod1) { #ifdef KD_DEBUG if (kb8042_debug) prom_printf(" -> debug mod1"); #endif kb8042->debugger.mod1_down = (state == KEY_PRESSED); } if (key_pos == kb8042->debugger.mod2) { #ifdef KD_DEBUG if (kb8042_debug) prom_printf(" -> debug mod2"); #endif kb8042->debugger.mod2_down = (state == KEY_PRESSED); } if (kb8042->debugger.enabled && key_pos == kb8042->debugger.trigger && kb8042->debugger.mod1_down && kb8042->debugger.mod2_down) { #ifdef KD_DEBUG if (kb8042_debug) prom_printf(" -> debugger\n"); #endif /* * Require new presses of the modifiers. */ kb8042->debugger.mod1_down = B_FALSE; kb8042->debugger.mod2_down = B_FALSE; abort_sequence_enter(NULL); return; } /* * If there's no queue above us - as can happen if we've been * attached but not opened - drop the keystroke. * Note that we do this here instead of above so that * Ctrl-Alt-D still works. */ if (kb8042->w_qp == NULL) { #ifdef KD_DEBUG if (kb8042_debug) prom_printf(" -> nobody home\n"); #endif return; } /* * This is to filter out auto repeat since it can't be * turned off at the hardware. (Yeah, yeah, PS/2 keyboards * can. Don't know whether they've taken over the world. * Don't think so.) */ if (kb8042_autorepeat_detect(kb8042, key_pos, state)) { #ifdef KD_DEBUG if (kb8042_debug) prom_printf(" -> autorepeat ignored\n"); #endif return; } #ifdef KD_DEBUG if (kb8042_debug) prom_printf(" -> OK\n"); #endif #if defined(KD_DEBUG) if (kb8042_pressrelease_debug) { prom_printf(" %s%d ", state == KEY_PRESSED ? "+" : "-", key_pos); } #endif kb8042_process_key(kb8042, key_pos, state); /* * This is a total hack. For some stupid reason, the two additional * keys on Korean keyboards (Hangul and Hangul/Hanja) report press * only. We synthesize a release immediately. */ if (synthetic_release_needed) { #if defined(KD_DEBUG) if (kb8042_debug) prom_printf("synthetic release %d\n", key_pos); if (kb8042_pressrelease_debug) prom_printf(" -%d(s) ", key_pos); #endif (void) kb8042_autorepeat_detect(kb8042, key_pos, KEY_RELEASED); kb8042_process_key(kb8042, key_pos, state); } } static void kb8042_process_key(struct kb8042 *kb8042, kbtrans_key_t key_pos, enum keystate state) { kbtrans_key_t key; ASSERT(key_pos >= 0 && key_pos <= 255); if (kb8042->simulated_kbd_type == KB_PC) { kbtrans_streams_key(kb8042->hw_kbtrans, key_pos, state); } else if (kb8042->simulated_kbd_type == KB_USB) { key = keytab_pc2usb[key_pos]; if (key != 0) { kbtrans_streams_key(kb8042->hw_kbtrans, key, state); } } } /* * Called from interrupt handler when keyboard interrupt occurs. */ static uint_t kb8042_intr(caddr_t arg) { uchar_t scancode; /* raw scan code */ int rc; struct kb8042 *kb8042 = (struct kb8042 *)arg; rc = DDI_INTR_UNCLAIMED; if (kb8042->init_state == KB8042_UNINITIALIZED) return (DDI_INTR_UNCLAIMED); /* don't care if drv_setparm succeeds */ (void) drv_setparm(SYSRINT, 1); while (ddi_get8(kb8042->handle, kb8042->addr + I8042_INT_INPUT_AVAIL) != 0) { rc = DDI_INTR_CLAIMED; scancode = ddi_get8(kb8042->handle, kb8042->addr + I8042_INT_INPUT_DATA); #if defined(KD_DEBUG) if (kb8042_low_level_debug) prom_printf(" b_rptr; if (csp->cp_rval) { freemsg(mp); return; } switch (csp->cp_cmd) { default: miocack(qp, mp, 0, 0); break; } } static boolean_t kb8042_polled_keycheck( struct kbtrans_hardware *hw, int *key, enum keystate *state) { struct kb8042 *kb8042 = (struct kb8042 *)hw; int scancode; boolean_t legit; boolean_t synthetic_release_needed; if (kb8042->polled_synthetic_release_pending) { *key = kb8042->polled_synthetic_release_key; *state = KEY_RELEASED; kb8042->polled_synthetic_release_pending = B_FALSE; #if defined(KD_DEBUG) if (kb8042_getchar_debug) prom_printf("synthetic release 0x%x\n", *key); #endif (void) kb8042_autorepeat_detect(kb8042, *key, *state); return (B_TRUE); } for (;;) { if (ddi_get8(kb8042->handle, kb8042->addr + I8042_POLL_INPUT_AVAIL) == 0) { return (B_FALSE); } scancode = ddi_get8(kb8042->handle, kb8042->addr + I8042_POLL_INPUT_DATA); #if defined(KD_DEBUG) if (kb8042_low_level_debug) prom_printf(" g<%x ", scancode); #endif #ifdef KD_DEBUG kb8042_debug_hotkey(scancode); if (kb8042_getchar_debug) prom_printf("polled 0x%x", scancode); #endif legit = KeyboardConvertScan(kb8042, scancode, key, state, &synthetic_release_needed); if (!legit) { #ifdef KD_DEBUG if (kb8042_getchar_debug) prom_printf(" -> ignored\n"); #endif continue; } #ifdef KD_DEBUG if (kb8042_getchar_debug) { prom_printf(" -> %s %d\n", *state == KEY_PRESSED ? "pressed" : "released", *key); } #endif /* * For the moment at least, we rely on hardware autorepeat * for polled I/O autorepeat. However, for coordination * with the interrupt-driven code, maintain the last key * pressed. */ (void) kb8042_autorepeat_detect(kb8042, *key, *state); /* * This is a total hack to support two additional keys * on Korean keyboards. They report only on press, and * so we synthesize a release. Most likely this will * never be important to polled I/O, but if I do it * "right" the first time it _won't_ be an issue. */ if (synthetic_release_needed) { kb8042->polled_synthetic_release_pending = B_TRUE; kb8042->polled_synthetic_release_key = *key; } if (kb8042->simulated_kbd_type == KB_USB) { *key = keytab_pc2usb[*key]; } return (B_TRUE); } } static void kb8042_setled(struct kb8042 *kb8042, int led_state, boolean_t polled) { kb8042->leds.desired = led_state; if (!polled) mutex_enter(&kb8042->w_hw_mutex); if (kb8042->leds.desired != kb8042->leds.commanded) { kb8042_send_to_keyboard(kb8042, KB_SET_LED, polled); } if (!polled) mutex_exit(&kb8042->w_hw_mutex); } static void kb8042_polled_setled(struct kbtrans_hardware *hw, int led_state) { struct kb8042 *kb8042 = (struct kb8042 *)hw; kb8042_setled(kb8042, led_state, B_TRUE); } static void kb8042_streams_setled(struct kbtrans_hardware *hw, int led_state) { struct kb8042 *kb8042 = (struct kb8042 *)hw; kb8042_setled(kb8042, led_state, B_FALSE); } static void kb8042_send_to_keyboard(struct kb8042 *kb8042, int byte, boolean_t polled) { uint8_t led_cmd[3]; /* * KB_SET_LED and KB_ENABLE are special commands for which the nexus * driver is requested to wait for responses before proceeding. * KB_SET_LED also provides an option byte for the nexus to send to * the keyboard after the acknowledgement. * * Other commands/data are sent using the single put8 I/O access * function. */ if (byte == KB_SET_LED) { /* * Initialize the buffer used with _rep_put8. We * expect an ACK after the SET_LED command, at which point * the LED byte should be sent to the keyboard. */ led_cmd[0] = KB_SET_LED; led_cmd[1] = KB_ACK; led_cmd[2] = kb8042_xlate_leds(kb8042->leds.desired); if (polled) { ddi_rep_put8(kb8042->handle, &led_cmd[0], kb8042->addr + I8042_POLL_CMD_PLUS_PARAM, 3, 0); } else { ddi_rep_put8(kb8042->handle, &led_cmd[0], kb8042->addr + I8042_INT_CMD_PLUS_PARAM, 3, 0); } kb8042->leds.commanded = kb8042->leds.desired; } else if (byte == KB_ENABLE) { /* * Initialize the buffer used with _rep_put8. We * expect an ACK after the KB_ENABLE command. */ led_cmd[0] = KB_ENABLE; led_cmd[1] = KB_ACK; if (polled) { ddi_rep_put8(kb8042->handle, &led_cmd[0], kb8042->addr + I8042_POLL_CMD_PLUS_PARAM, 2, 0); } else { ddi_rep_put8(kb8042->handle, &led_cmd[0], kb8042->addr + I8042_INT_CMD_PLUS_PARAM, 2, 0); } } else { /* All other commands use the "normal" virtual output port */ if (polled) { ddi_put8(kb8042->handle, kb8042->addr + I8042_POLL_OUTPUT_DATA, byte); } else { ddi_put8(kb8042->handle, kb8042->addr + I8042_INT_OUTPUT_DATA, byte); } } #if defined(KD_DEBUG) if (kb8042_low_level_debug) prom_printf(" >K:%x ", byte); #endif } /* * Wait until the keyboard is fully up, maybe. * We may be the first person to talk to the keyboard, in which case * it's patiently waiting to say "AA" to us to tell us it's up. * In theory it sends the AA in 300ms < n < 9s, but it's a pretty * good bet that we've already spent that long getting to that point, * so we'll only wait long enough for the communications electronics to * run. */ static void kb8042_wait_poweron(struct kb8042 *kb8042) { int cnt; int ready; unsigned char byt; /* wait for up to 250 ms for a response */ for (cnt = 0; cnt < 250; cnt++) { ready = ddi_get8(kb8042->handle, kb8042->addr + I8042_INT_INPUT_AVAIL); if (ready != 0) break; drv_usecwait(1000); } /* * If there's something pending, read and discard it. If not, * assume things are OK anyway - maybe somebody else ate it * already. (On a PC, the BIOS almost certainly did.) */ if (ready != 0) { byt = ddi_get8(kb8042->handle, kb8042->addr + I8042_INT_INPUT_DATA); #if defined(KD_DEBUG) if (kb8042_low_level_debug) prom_printf(" kb_old_key_pos == key_pos) kb8042->kb_old_key_pos = 0; } else { if (kb8042->kb_old_key_pos == key_pos) { return (B_TRUE); } kb8042->kb_old_key_pos = key_pos; } return (B_FALSE); } /* ARGSUSED */ static void kb8042_type4_cmd(struct kb8042 *kb8042, int cmd) { switch (cmd) { case KBD_CMD_BELL: (void) beeper_on(BEEP_TYPE4); break; case KBD_CMD_NOBELL: (void) beeper_off(); break; } } /* * This is a pass-thru routine to get a character at poll time. */ static int kb8042_polled_getchar(cons_polledio_arg_t arg) { struct kb8042 *kb8042; kb8042 = (struct kb8042 *)arg; return (kbtrans_getchar(kb8042->hw_kbtrans)); } /* * This is a pass-thru routine to get a character at poll time. */ static int kb8042_polled_ischar(cons_polledio_arg_t arg) { struct kb8042 *kb8042; kb8042 = (struct kb8042 *)arg; return (kbtrans_ischar(kb8042->hw_kbtrans)); }