/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2008 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" /* * Console kbd multiplexor driver for Sun. * The console "zs" port is linked under us, with the "kbd" module pushed * on top of it. * Minor device 0 is what programs normally use. * Minor device 1 is used to feed predigested keystrokes to the "workstation * console" driver, which it is linked beneath. * * * This module can support multiple keyboards to be used simultaneously. * and enable users to use at a time multiple keyboards connected to the * same system. All the keyboards are linked under conskbd, and act as a * keyboard with replicated keys. * * The DIN keyboards of SUN, for exmple , type 3/4/5, are supported via * a two-level architecure. The lower one is one of serialport drivers, such * as zs, se, and the upper is "kb" STREAMS module. Currenly, the serialport * drivers don't support polled I/O interfaces, we couldn't group the keyboard * of this kind under conskbd. So we do as the follows: * * A new ioctl CONSSETKBDTYPE interface between conskbd and lower * keyboard drivers is added. When conskbd receives I_LINK or I_PLINK * ioctl, it will send a CONSSETKBDTYPE ioctl to the driver which is * requesting to be linked under conskbd. If the lower driver does't * recognize this ioctl, the virtual keyboard will be disabled so that * only one keyboard instance could be linked under conskbd. */ #define KEYMAP_SIZE_VARIABLE #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include extern struct keyboard *kbtrans_usbkb_maptab_init(void); extern void kbtrans_usbkb_maptab_fini(struct keyboard **); extern int ddi_create_internal_pathname(dev_info_t *, char *, int, minor_t); /* * Module linkage routines for the kernel */ static int conskbd_attach(dev_info_t *, ddi_attach_cmd_t); static int conskbd_detach(dev_info_t *, ddi_detach_cmd_t); static int conskbd_info(dev_info_t *, ddi_info_cmd_t, void *, void **); /* * STREAMS queue processing procedures */ static void conskbduwsrv(queue_t *); static void conskbdlwserv(queue_t *); static void conskbdlrput(queue_t *, mblk_t *); static int conskbdclose(queue_t *, int, cred_t *); static int conskbdopen(queue_t *, dev_t *, int, int, cred_t *); /* STREAMS driver id and limit value struct */ static struct module_info conskbdm_info = { 0, /* mi_idnum */ "conskbd", /* mi_idname */ 0, /* mi_minpsz */ 1024, /* mi_maxpsz */ 2048, /* mi_hiwat */ 128 /* mi_lowat */ }; /* * STREAMS queue processing procedure structures */ /* upper read queue processing procedure structures */ static struct qinit conskbdurinit = { NULL, /* qi_putp */ (int (*)())NULL, /* qi_srvp */ conskbdopen, /* qi_qopen */ conskbdclose, /* qi_qclose */ (int (*)())NULL, /* qi_qadmin */ &conskbdm_info, /* qi_minfo */ NULL /* qi_mstat */ }; /* upper write queue processing procedures structuresi */ static struct qinit conskbduwinit = { (int (*)())putq, /* qi_putp */ (int (*)())conskbduwsrv, /* qi_srvp */ conskbdopen, /* qi_qopen */ conskbdclose, /* qi_qclose */ (int (*)())NULL, /* qi_qadmin */ &conskbdm_info, /* qi_minfo */ NULL /* qi_mstat */ }; /* lower read queue processing procedures structures */ static struct qinit conskbdlrinit = { (int (*)())conskbdlrput, /* qi_putp */ (int (*)())NULL, /* qi_srvp */ (int (*)())NULL, /* qi_qopen */ (int (*)())NULL, /* qi_qclose */ (int (*)())NULL, /* qi_qadmin */ &conskbdm_info, /* qi_minfo */ NULL /* qi_mstat */ }; /* lower write processing procedures structures */ static struct qinit conskbdlwinit = { putq, /* qi_putp */ (int (*)())conskbdlwserv, /* qi_srvp */ (int (*)())NULL, /* qi_qopen */ (int (*)())NULL, /* qi_qclose */ (int (*)())NULL, /* qi_qadmin */ &conskbdm_info, /* qi_minfo */ NULL /* qi_mstat */ }; /* STREAMS entity declaration structure */ static struct streamtab conskbd_str_info = { &conskbdurinit, /* st_rdinit */ &conskbduwinit, /* st_wrinit */ &conskbdlrinit, /* st_muxrinit */ &conskbdlwinit, /* st_muxwinit */ }; /* Entry points structure */ static struct cb_ops cb_conskbd_ops = { nulldev, /* cb_open */ nulldev, /* cb_close */ nodev, /* cb_strategy */ nodev, /* cb_print */ nodev, /* cb_dump */ nodev, /* cb_read */ nodev, /* cb_write */ nodev, /* cb_ioctl */ nodev, /* cb_devmap */ nodev, /* cb_mmap */ nodev, /* cb_segmap */ nochpoll, /* cb_chpoll */ ddi_prop_op, /* cb_prop_op */ &conskbd_str_info, /* cb_stream */ D_MP | D_MTOUTPERIM | D_MTOCEXCL /* cb_flag */ }; /* * Device operations structure */ static struct dev_ops conskbd_ops = { DEVO_REV, /* devo_rev */ 0, /* devo_refcnt */ conskbd_info, /* devo_getinfo */ nulldev, /* devo_identify */ nulldev, /* devo_probe */ conskbd_attach, /* devo_attach */ conskbd_detach, /* devo_detach */ nodev, /* devo_reset */ &(cb_conskbd_ops), /* devo_cb_ops */ (struct bus_ops *)NULL, /* devo_bus_ops */ NULL /* devo_power */ }; /* * Module linkage information for the kernel. */ static struct modldrv modldrv = { &mod_driverops, /* Type of module. This one is a pseudo driver */ "conskbd multiplexer driver %I%", &conskbd_ops, /* driver ops */ }; /* * Module linkage structure */ static struct modlinkage modlinkage = { MODREV_1, /* ml_rev */ &modldrv, /* ml_linkage */ NULL /* NULL terminates the list */ }; /* * Debug printing */ #ifndef DPRINTF #ifdef DEBUG void conskbd_dprintf(const char *fmt, ...); #define DPRINTF(l, m, args) \ (((l) >= conskbd_errlevel) && ((m) & conskbd_errmask) ? \ conskbd_dprintf args : \ (void) 0) /* * Severity levels for printing */ #define PRINT_L0 0 /* print every message */ #define PRINT_L1 1 /* debug */ #define PRINT_L2 2 /* quiet */ /* * Masks */ #define PRINT_MASK_ALL 0xFFFFFFFFU uint_t conskbd_errmask = PRINT_MASK_ALL; uint_t conskbd_errlevel = PRINT_L2; #else #define DPRINTF(l, m, args) /* NOTHING */ #endif #endif /* * Module global data are protected by outer perimeter. Modifying * these global data is executed in outer perimeter exclusively. * Except in conskbdopen() and conskbdclose(), which are entered * exclusively (Refer to D_MTOCEXCL flag), all changes for the * global variables are protected by qwriter(). */ static queue_t *conskbd_regqueue; /* regular keyboard queue above us */ static queue_t *conskbd_consqueue; /* console queue above us */ static dev_info_t *conskbd_dip; /* private copy of devinfo pointer */ static long conskbd_idle_stamp; /* seconds tstamp of latest keystroke */ static struct keyboard *conskbd_keyindex; /* * Normally, kstats of type KSTAT_TYPE_NAMED have multiple elements. In * this case we use this type for a single element because the ioctl code * for it knows how to handle mixed kernel/user data models. Also, it * will be easier to add new statistics later. */ static struct { kstat_named_t idle_sec; /* seconds since last keystroke */ } conskbd_kstat = { { "idle_sec", KSTAT_DATA_LONG, } }; /* * Local routines prototypes */ static int conskbd_kstat_update(kstat_t *, int); static void conskbd_ioctl(queue_t *, mblk_t *); static void conskbd_ioc_plink(queue_t *, mblk_t *); static void conskbd_ioc_punlink(queue_t *, mblk_t *); static void conskbd_legacy_kbd_ioctl(queue_t *, mblk_t *); static void conskbd_virtual_kbd_ioctl(queue_t *, mblk_t *); static mblk_t *conskbd_alloc_firm_event(ushort_t, int); static conskbd_pending_msg_t *conskbd_mux_find_msg(mblk_t *); static void conskbd_mux_enqueue_msg(conskbd_pending_msg_t *); static void conskbd_mux_dequeue_msg(conskbd_pending_msg_t *); static void conskbd_link_lowque_virt(queue_t *, mblk_t *); static void conskbd_link_lowque_legacy(queue_t *, mblk_t *); static void conskbd_handle_downstream_msg(queue_t *, mblk_t *); static void conskbd_kioctype_complete(conskbd_lower_queue_t *, mblk_t *); static void conskbd_kioctrans_complete(conskbd_lower_queue_t *, mblk_t *); static void conskbd_kioclayout_complete(conskbd_lower_queue_t *, mblk_t *); static void conskbd_kiocsled_complete(conskbd_lower_queue_t *, mblk_t *); static void conskbd_mux_upstream_msg(conskbd_lower_queue_t *, mblk_t *); static void conskbd_legacy_upstream_msg(conskbd_lower_queue_t *, mblk_t *); static void conskbd_lqs_ack_complete(conskbd_lower_queue_t *, mblk_t *); static void conskbd_polledio_enter(cons_polledio_arg_t); static void conskbd_polledio_exit(cons_polledio_arg_t); static int conskbd_polledio_ischar(cons_polledio_arg_t); static int conskbd_polledio_getchar(cons_polledio_arg_t); static void conskbd_polledio_setled(struct kbtrans_hardware *, int); static void conskbd_streams_setled(struct kbtrans_hardware *, int); static boolean_t conskbd_override_kbtrans(queue_t *, mblk_t *); static boolean_t conskbd_polled_keycheck(struct kbtrans_hardware *, kbtrans_key_t *, enum keystate *); /* * Callbacks needed by kbtrans */ static struct kbtrans_callbacks conskbd_callbacks = { conskbd_streams_setled, conskbd_polledio_setled, conskbd_polled_keycheck, }; /* * Single private "global" lock for the few rare conditions * we want single-threaded. */ static kmutex_t conskbd_msgq_lock; static conskbd_pending_msg_t *conskbd_msg_queue; /* * The software state structure of virtual keyboard. * Currently, only one virtual keyboard is supported. */ static conskbd_state_t conskbd = { 0 }; /* This variable backs up the layout state for non-self-ID keyboards */ static int kbd_layout_bak = 0; /* * _init() * * Description: * Driver initialization, called when driver is first loaded. * This is how access is initially given to all the static structures. * * Arguments: * None * * Returns: * ddi_soft_state_init() status, see ddi_soft_state_init(9f), or * mod_install() status, see mod_install(9f) */ int _init(void) { int error; error = mod_install(&modlinkage); if (error != 0) { return (error); } conskbd_keyindex = kbtrans_usbkb_maptab_init(); mutex_init(&conskbd_msgq_lock, NULL, MUTEX_DRIVER, NULL); return (error); } /* _init() */ /* * _fini() * * Description: * Module de-initialization, called when the driver is to be unloaded. * * Arguments: * None * * Returns: * mod_remove() status, see mod_remove(9f) */ int _fini(void) { int error; error = mod_remove(&modlinkage); if (error != 0) return (error); mutex_destroy(&conskbd_msgq_lock); kbtrans_usbkb_maptab_fini(&conskbd_keyindex); return (0); } /* _fini() */ /* * _info() * * Description: * Module information, returns information about the driver. * * Arguments: * modinfo *modinfop Pointer to the opaque modinfo structure * * Returns: * mod_info() status, see mod_info(9f) */ int _info(struct modinfo *modinfop) { return (mod_info(&modlinkage, modinfop)); } /* _info() */ /* * conskbd_attach() * * Description: * This routine creates two device nodes. One is the "kbd" node, which * is used by user application programs(such as Xserver).The other is the * "conskbd" node, which is an internal node. consconfig_dacf module will * open this internal node, and link the conskbd under the wc (workstaion * console). * * Arguments: * dev_info_t *dip Pointer to the device's dev_info struct * ddi_attach_cmd_t cmd Attach command * * Returns: * DDI_SUCCESS The driver was initialized properly * DDI_FAILURE The driver couldn't be initialized properly */ /*ARGSUSED*/ static int conskbd_attach(dev_info_t *devi, ddi_attach_cmd_t cmd) { kstat_t *ksp; switch (cmd) { case DDI_ATTACH: break; default: return (DDI_FAILURE); } if ((ddi_create_minor_node(devi, "kbd", S_IFCHR, 0, DDI_PSEUDO, NULL) == DDI_FAILURE) || (ddi_create_internal_pathname(devi, "conskbd", S_IFCHR, 1) == DDI_FAILURE)) { ddi_remove_minor_node(devi, NULL); return (DDI_FAILURE); } conskbd_dip = devi; ksp = kstat_create("conskbd", 0, "activity", "misc", KSTAT_TYPE_NAMED, sizeof (conskbd_kstat) / sizeof (kstat_named_t), KSTAT_FLAG_VIRTUAL); if (ksp) { ksp->ks_data = (void *) &conskbd_kstat; ksp->ks_update = conskbd_kstat_update; kstat_install(ksp); conskbd_idle_stamp = gethrestime_sec(); /* initial value */ } conskbd.conskbd_layout = -1; /* invalid layout */ conskbd.conskbd_led_state = -1; conskbd.conskbd_bypassed = B_FALSE; return (DDI_SUCCESS); } /* conskbd_attach() */ /* * conskbd_detach() * * Description: * Detach an instance of the conskbd driver. In fact, the driver can not * be detached. * * Arguments: * dev_info_t *dip Pointer to the device's dev_info struct * ddi_detach_cmd_t cmd Detach command * * Returns: * DDI_SUCCESS The driver was detached * DDI_FAILURE The driver couldn't be detached */ /*ARGSUSED*/ static int conskbd_detach(dev_info_t *devi, ddi_detach_cmd_t cmd) { return (DDI_FAILURE); } /* conskbd_detach() */ /* ARGSUSED */ static int conskbd_info(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg, void **result) { register int error; switch (infocmd) { case DDI_INFO_DEVT2DEVINFO: if (conskbd_dip == NULL) { error = DDI_FAILURE; } else { *result = (void *) conskbd_dip; error = DDI_SUCCESS; } break; case DDI_INFO_DEVT2INSTANCE: *result = (void *)0; error = DDI_SUCCESS; break; default: error = DDI_FAILURE; } return (error); } /* conskbd_info() */ /*ARGSUSED*/ static int conskbdopen(queue_t *q, dev_t *devp, int flag, int sflag, cred_t *crp) { dev_t unit; int err; unit = getminor(*devp); if (unit == 0) { /* * Opening "/dev/kbd". */ conskbd_regqueue = q; qprocson(q); return (0); } else if (unit != 1) { /* we don't do that under Bozo's Big Tent */ return (ENODEV); } /* * Check if already initialized */ if (conskbd_consqueue != NULL) return (0); /* * Opening the device to be linked under the console. */ conskbd_consqueue = q; /* * initialize kbtrans module for conskbd */ err = kbtrans_streams_init(q, sflag, crp, (struct kbtrans_hardware *) &conskbd, &conskbd_callbacks, &conskbd.conskbd_kbtrans, 0, 0); if (err != 0) return (err); kbtrans_streams_set_keyboard(conskbd.conskbd_kbtrans, KB_USB, conskbd_keyindex); conskbd.conskbd_polledio.cons_polledio_version = CONSPOLLEDIO_V1; conskbd.conskbd_polledio.cons_polledio_argument = (cons_polledio_arg_t)&conskbd; conskbd.conskbd_polledio.cons_polledio_putchar = NULL; conskbd.conskbd_polledio.cons_polledio_getchar = (int (*)(cons_polledio_arg_t)) conskbd_polledio_getchar; conskbd.conskbd_polledio.cons_polledio_ischar = (boolean_t (*)(cons_polledio_arg_t))conskbd_polledio_ischar; conskbd.conskbd_polledio.cons_polledio_enter = conskbd_polledio_enter; conskbd.conskbd_polledio.cons_polledio_exit = conskbd_polledio_exit; qprocson(q); return (0); } /* conskbdopen() */ /*ARGSUSED*/ static int conskbdclose(queue_t *q, int flag, cred_t *crp) { if (q == conskbd_regqueue) { conskbd_pending_msg_t *pmsg, *prev, *next; mblk_t *mp; /* switch the input stream back to conskbd_consqueue */ conskbd.conskbd_directio = B_FALSE; kbtrans_streams_untimeout(conskbd.conskbd_kbtrans); kbtrans_streams_set_queue(conskbd.conskbd_kbtrans, conskbd_consqueue); qprocsoff(q); conskbd_regqueue = NULL; /* * If there are any pending ioctls which conskbd hasn't * responded to yet, remove them from conskbd_msg_queue. * Otherwise, we might send the response to a nonexistent * closed queue. Refer to: conskbd_mux_upstream_msg(). */ for (prev = NULL, pmsg = conskbd_msg_queue; pmsg != NULL; pmsg = next) { next = pmsg->kpm_next; if (pmsg->kpm_upper_queue == WR(q)) { if (prev == NULL) conskbd_msg_queue = next; else prev->kpm_next = next; while (pmsg->kpm_resp_list != NULL) { mp = pmsg->kpm_resp_list; pmsg->kpm_resp_list = mp->b_next; mp->b_next = mp->b_prev = NULL; freemsg(mp); } mutex_destroy(&pmsg->kpm_lock); kmem_free(pmsg, sizeof (*pmsg)); } else { prev = pmsg; } } } else if (q == conskbd_consqueue) { /* * Well, this is probably a mistake, but we will permit you * to close the path to the console if you really insist. */ qprocsoff(q); conskbd_consqueue = NULL; } return (0); } /* conskbdclose() */ /* * Service procedure for upper write queue. * To make sure the order of messages, we don't process any * message in qi_putq() routine of upper write queue, instead the * qi_putq() routine, which is a standard putq() routine, puts all * messages into a queue, and lets the following service procedure * deal with all messages. * This routine is invoked when ioctl commands are send down * by a consumer of the keyboard device, eg, when the keyboard * consumer tries to determine the keyboard layout type, or sets * the led states. */ static void conskbduwsrv(queue_t *q) { mblk_t *mp; queue_t *oldq; enum kbtrans_message_response ret; struct copyresp *csp; struct freq_request *frqp; int error; while ((mp = getq(q)) != NULL) { /* * if the virtual keyboard is supported */ if (conskbd.conskbd_bypassed == B_FALSE) { if (conskbd_override_kbtrans(q, mp) == B_TRUE) continue; /* * The conskbd driver is a psaudo driver. It has two * devcice nodes, one is used by kernel, and the other * is used by end-users. There are two STREAMS queues * corresponding to the two device nodes, console queue * and regular queue. * In conskbd_override_kbtrans() routine, when receives * KIOCSDIRECT ioctl, we need change the direction of * keyboard input messages, and direct the input stream * from keyboard into right queue. It causes this queue * to be switched between regular queue and console * queue. And here, in this routine, the in-parameter * "q" can be any one of the two. Moreover, this module * is executed in multithreaded environment, even if the * q is switched to regular queue, it is possible that * the in-parameter is still the console queue, and we * need to return response to right queue. * The response is sent to upstream by the kbtrans * module. so we need to save the old queue, and wait * kbtrans to proces message and to send response out, * and then switch back to old queue. */ oldq = kbtrans_streams_get_queue( conskbd.conskbd_kbtrans); kbtrans_streams_set_queue( conskbd.conskbd_kbtrans, RD(q)); ret = kbtrans_streams_message( conskbd.conskbd_kbtrans, mp); kbtrans_streams_set_queue( conskbd.conskbd_kbtrans, oldq); switch (ret) { case KBTRANS_MESSAGE_HANDLED: continue; case KBTRANS_MESSAGE_NOT_HANDLED: break; } } switch (mp->b_datap->db_type) { case M_IOCTL: conskbd_ioctl(q, mp); break; case M_FLUSH: if (*mp->b_rptr & FLUSHW) { flushq(q, FLUSHDATA); } /* * here, if flush read queue, some key-up messages * may be lost so that upper module or applications * treat corresponding keys as being held down for * ever. */ freemsg(mp); break; case M_DATA: /* * virtual keyboard doesn't support this interface. * only when it is disabled, we pass the message * down to lower queue. */ if ((conskbd.conskbd_bypassed) && (conskbd.conskbd_lqueue_nums > 0)) { if (putq(conskbd.conskbd_lqueue_list-> lqs_queue, mp) != 1) freemsg(mp); } else { freemsg(mp); } break; case M_IOCDATA: /* * Only deal with copyresp to KIOCSETFREQ * transparent ioctl now */ csp = (struct copyresp *)mp->b_rptr; if (csp->cp_rval) { miocnak(q, mp, 0, EINVAL); break; } error = 0; switch (csp->cp_cmd) { case KIOCSETFREQ: frqp = (struct freq_request *)mp-> b_cont->b_rptr; switch (frqp->type) { case CONSOLE_BEEP: error = beeper_freq(BEEP_CONSOLE, (int)frqp->freq); break; case KBD_BEEP: error = beeper_freq(BEEP_TYPE4, (int)frqp->freq); break; default: error = 1; } /* frqp->type */ break; default: error = 1; } /* csp->cp_cmd */ if (error == 0) miocack(q, mp, 0, 0); else miocnak(q, mp, 0, EINVAL); break; default: /* * Pass an error message up. */ mp->b_datap->db_type = M_ERROR; if (mp->b_cont) { freemsg(mp->b_cont); mp->b_cont = NULL; } mp->b_rptr = mp->b_datap->db_base; mp->b_wptr = mp->b_rptr + sizeof (char); *mp->b_rptr = EINVAL; qreply(q, mp); } } /* end of while */ } /* conskbduwsrv() */ static void conskbd_ioctl(queue_t *q, mblk_t *mp) { struct iocblk *iocp; int error = 0; iocp = (struct iocblk *)mp->b_rptr; switch (iocp->ioc_cmd) { case I_LINK: case I_PLINK: if (conskbd.conskbd_bypassed == B_TRUE) { /* * A legacy keyboard can NOT be connected to conskbd together * with other keyboards. So when a legacy keyboard is already * linked under conkbd, we just reject all others. */ miocnak(q, mp, 0, EAGAIN); break; } qwriter(q, mp, conskbd_ioc_plink, PERIM_OUTER); break; case I_UNLINK: case I_PUNLINK: qwriter(q, mp, conskbd_ioc_punlink, PERIM_OUTER); break; case KIOCSKABORTEN: /* * Check if privileged */ if ((error = secpolicy_sys_config(iocp->ioc_cr, B_FALSE))) { miocnak(q, mp, 0, error); return; } error = miocpullup(mp, sizeof (int)); if (error != 0) { miocnak(q, mp, 0, error); return; } abort_enable = *(int *)mp->b_cont->b_rptr; miocack(q, mp, 0, 0); break; case KIOCSETFREQ: if (iocp->ioc_count != TRANSPARENT) { /* * We don't support non-transparent ioctls, * i.e. I_STR ioctls */ miocnak(q, mp, 0, EINVAL); } else { /* Transparent ioctl */ mcopyin(mp, NULL, sizeof (struct freq_request), NULL); qreply(q, mp); } break; default: if (conskbd.conskbd_bypassed == B_TRUE) { conskbd_legacy_kbd_ioctl(q, mp); } else { conskbd_virtual_kbd_ioctl(q, mp); } } } /* conskbd_ioctl() */ static void conskbd_virtual_kbd_ioctl(queue_t *q, mblk_t *mp) { struct iocblk *iocp; mblk_t *datap; int cmd; int error = 0; iocp = (struct iocblk *)mp->b_rptr; switch (iocp->ioc_cmd) { case KIOCLAYOUT: if ((datap = allocb(sizeof (int), BPRI_HI)) == NULL) { miocnak(q, mp, 0, ENOMEM); break; } if (conskbd.conskbd_layout == -1) *(int *)datap->b_wptr = KBTRANS_USBKB_DEFAULT_LAYOUT; else *(int *)datap->b_wptr = conskbd.conskbd_layout; datap->b_wptr += sizeof (int); if (mp->b_cont) freemsg(mp->b_cont); mp->b_cont = datap; miocack(q, mp, sizeof (int), 0); break; case KIOCSLAYOUT: if (iocp->ioc_count != TRANSPARENT) { miocnak(q, mp, 0, EINVAL); break; } kbd_layout_bak = conskbd.conskbd_layout; conskbd.conskbd_layout = *(intptr_t *)(mp->b_cont->b_rptr); if (conskbd.conskbd_layout != kbd_layout_bak) { /* notify the upper of the change event */ if ((datap = conskbd_alloc_firm_event( KEYBOARD_LAYOUT_CHANGE, conskbd.conskbd_layout)) != NULL) { if (conskbd.conskbd_directio) { putnext(conskbd_regqueue, datap); } else { freemsg(datap); } } } miocack(q, mp, 0, 0); break; case CONSOPENPOLLEDIO: error = miocpullup(mp, sizeof (struct cons_polledio *)); if (error != 0) { miocnak(q, mp, 0, error); break; } if (conskbd.conskbd_lqueue_list == NULL) { miocnak(q, mp, 0, EINVAL); break; } conskbd_handle_downstream_msg(q, mp); break; case CONSCLOSEPOLLEDIO: if (conskbd.conskbd_lqueue_list == NULL) { miocnak(q, mp, 0, EINVAL); break; } conskbd_handle_downstream_msg(q, mp); break; case CONSSETABORTENABLE: /* * To enable combined STOP-A(or F1-A) to trap into kmdb, * the lower physical keyboard drivers are always told not * to parse abort sequence(refer to consconfig_dacf module). * Instead, lower drivers always send all keydown & keyup * messages up to conskbd, so that when key STOP(or F1) is * pressed on one keyboard and key A is pressed on another * keyboard, the system could trap into kmdb. * * When we by kbtrans_streams_message() invoked kbtrans to * handle ioctls in conskbduwsrv() routine, kbtrans module * already handle the message though it returned to us a * KBTRANS_MESSAGE_NOT_HANDLED. For virtual keyboard, no * special initialization or un-initialization is needed. * So we just return ACK to upper module. */ miocack(q, mp, 0, 0); break; case KIOCCMD: case KIOCMKTONE: if (conskbd.conskbd_lqueue_list == NULL || mp->b_cont == NULL) { miocnak(q, mp, 0, EINVAL); break; } cmd = *(int *)mp->b_cont->b_rptr; if (cmd == KBD_CMD_GETLAYOUT) { freemsg(mp->b_cont); datap = allocb(sizeof (int), BPRI_HI); if (datap == NULL) { miocnak(q, mp, 0, ENOMEM); return; } if (conskbd.conskbd_layout == -1) *(int *)datap->b_wptr = KBTRANS_USBKB_DEFAULT_LAYOUT; else *(int *)datap->b_wptr = conskbd.conskbd_layout; mp->b_cont = datap; miocack(q, mp, sizeof (int), 0); return; } conskbd_handle_downstream_msg(q, mp); break; default: miocnak(q, mp, 0, EINVAL); break; } } /* conskbd_virtual_kbd_ioctl() */ static void conskbd_legacy_kbd_ioctl(queue_t *q, mblk_t *mp) { conskbd_lower_queue_t *lq; struct iocblk *iocp; int error = 0; iocp = (struct iocblk *)mp->b_rptr; ASSERT(conskbd.conskbd_lqueue_nums == 1); switch (iocp->ioc_cmd) { case KIOCGDIRECT: { mblk_t *datap; if ((datap = allocb(sizeof (int), BPRI_MED)) == NULL) { miocnak(q, mp, 0, ENOMEM); break; } *(int *)datap->b_wptr = conskbd.conskbd_directio; datap->b_wptr += sizeof (int); if (mp->b_cont != NULL) { freemsg(mp->b_cont); mp->b_cont = NULL; } mp->b_cont = datap; miocack(q, mp, sizeof (int), 0); break; } case KIOCSDIRECT: error = miocpullup(mp, sizeof (int)); if (error != 0) { miocnak(q, mp, 0, error); break; } conskbd.conskbd_directio = *(int *)mp->b_cont->b_rptr; /* * Pass this through, if there's something to pass * it through to, so the system keyboard can reset * itself. */ if (conskbd.conskbd_lqueue_nums > 0) { lq = conskbd.conskbd_lqueue_list; ASSERT(lq && lq->lqs_next == NULL); if (putq(lq->lqs_queue, mp) != 1) { miocnak(q, mp, 0, ENOMEM); return; } break; } miocack(q, mp, 0, 0); break; default: /* * Pass this through, if there's something to pass it * through to; otherwise, reject it. */ if (conskbd.conskbd_lqueue_nums > 0) { lq = conskbd.conskbd_lqueue_list; ASSERT(lq && lq->lqs_next == NULL); if (putq(lq->lqs_queue, mp) != 1) { miocnak(q, mp, 0, ENOMEM); return; } break; } /* nobody below us; reject it */ miocnak(q, mp, 0, EINVAL); break; } } /* conskbd_legacy_kbd_ioctl() */ /* * Service procedure for lower write queue. * Puts things on the queue below us, if it lets us. */ static void conskbdlwserv(queue_t *q) { register mblk_t *mp; while (canput(q->q_next) && (mp = getq(q)) != NULL) putnext(q, mp); } /* conskbdlwserv() */ /* * Put procedure for lower read queue. * Pass everything up to minor device 0 if "directio" set, otherwise to minor * device 1. */ static void conskbdlrput(queue_t *q, mblk_t *mp) { conskbd_lower_queue_t *lqs; struct iocblk *iocp; Firm_event *fe; DPRINTF(PRINT_L1, PRINT_MASK_ALL, ("conskbdlrput\n")); switch (mp->b_datap->db_type) { case M_FLUSH: if (*mp->b_rptr == FLUSHR) { flushq(q, FLUSHDATA); /* XXX doesn't flush M_DELAY */ *mp->b_rptr &= ~FLUSHR; /* it has been flushed */ } if (*mp->b_rptr == FLUSHW) { flushq(WR(q), FLUSHDATA); qreply(q, mp); /* give the read queues a crack at it */ } else freemsg(mp); break; case M_DATA: if (conskbd.conskbd_bypassed == B_FALSE) { fe = (Firm_event *)mp->b_rptr; /* * This is a workaround. * * According to HID specification, there are the * following keycode mapping between PS2 and USB, * * PS2 AT-101 keycode(29) ---> USB(49) * PS2 AT-102 keycode(42) ---> USB(50) * * However, the two keys, AT-101(29) and AT-102(42), * have the same scancode,0x2B, in PS2 scancode SET1 * which we are using. The Kb8042 driver always * recognizes the two keys as PS2(29) so that we could * not know which is being pressed or released when we * receive scancode 0x2B. Fortunately, the two keys can * not co-exist in a specific layout. In other words, * in the table of keycode-to-symbol mapping, either * entry 49 or 50 is a hole. So, if we're processing a * keycode 49, we look at the entry for 49. If it's * HOLE, remap the key to 50; If we're processing a 50, * look at the entry for 50. If it's HOLE, we remap * the key to 49. */ if (fe->id == 49 || fe->id == 50) { if (conskbd_keyindex->k_normal[50] == HOLE) fe->id = 49; else fe->id = 50; } /* * Remember key state of each key of lower physical * keyboard. When a keyboard is umplumbed from conskbd, * we will check all key states. By then, we will fake * a KEY_RELEASED message for each key in KEY_PRESSED * state. Otherwise, upper module will treat these keys * as held-down for ever. */ iocp = (struct iocblk *)mp->b_rptr; lqs = (conskbd_lower_queue_t *)q->q_ptr; if (fe->value) lqs->lqs_key_state[fe->id] = KEY_PRESSED; else lqs->lqs_key_state[fe->id] = KEY_RELEASED; kbtrans_streams_key(conskbd.conskbd_kbtrans, fe->id, fe->value ? KEY_PRESSED : KEY_RELEASED); freemsg(mp); } else { if (conskbd.conskbd_directio) putnext(conskbd_regqueue, mp); else if (conskbd_consqueue != NULL) putnext(conskbd_consqueue, mp); else freemsg(mp); } conskbd_idle_stamp = gethrestime_sec(); break; case M_IOCACK: case M_IOCNAK: iocp = (struct iocblk *)mp->b_rptr; lqs = (conskbd_lower_queue_t *)q->q_ptr; DPRINTF(PRINT_L1, PRINT_MASK_ALL, ("conskbdlrput: " "ACK/NAK - cmd 0x%x\n", iocp->ioc_cmd)); conskbd_lqs_ack_complete(lqs, mp); break; case M_ERROR: case M_HANGUP: default: freemsg(mp); /* anything useful here? */ break; } } /* conskbdlrput() */ /* ARGSUSED */ static int conskbd_kstat_update(kstat_t *ksp, int rw) { if (rw == KSTAT_WRITE) return (EACCES); conskbd_kstat.idle_sec.value.l = gethrestime_sec() - conskbd_idle_stamp; return (0); } /* conskbd_kstat_update() */ /* * STREAMS architecuture provides guarantee that the ID of each * message, iocblk.ioc_id, in a stream is unique. The following * routine performes the task: When receive request from upstream, * it saves the request in a global link list, clones the request, * and then sends a copy of the request to each of lower queues * which are plumbed into conskbd. And then, when receives responses * from lower queues in conskbdlrput() routine, we can know the * request matching received responses by searching the global linked * list to find the request which has the same message ID of the * response. Then, when all lower queues response this request, we * give a response to upstreams based the following policy: * If any one of lower queues acks our reuqest, then we return ack * to upstreams; only if all lower queues nak our request, we return * nak to upstreams. If all responses are nak, the error number of * the first response is sent to upstream. */ static void conskbd_handle_downstream_msg(queue_t *q, mblk_t *mp) { conskbd_pending_msg_t *msg; conskbd_lower_queue_t *lqs; struct iocblk *iocp; mblk_t *clonemp; int retry; if (conskbd.conskbd_lqueue_nums == 0) { miocnak(q, mp, 0, EINVAL); return; } msg = (conskbd_pending_msg_t *) kmem_zalloc(sizeof (conskbd_pending_msg_t), KM_SLEEP); mutex_init(&msg->kpm_lock, NULL, MUTEX_DRIVER, NULL); lqs = conskbd.conskbd_lqueue_list; iocp = (struct iocblk *)mp->b_rptr; ASSERT(iocp->ioc_cmd == CONSOPENPOLLEDIO || iocp->ioc_cmd == CONSCLOSEPOLLEDIO || iocp->ioc_cmd == KIOCCMD || iocp->ioc_cmd == KIOCMKTONE); msg->kpm_upper_queue = q; msg->kpm_req_msg = mp; msg->kpm_req_id = iocp->ioc_id; msg->kpm_req_cmd = iocp->ioc_cmd; msg->kpm_req_nums = conskbd.conskbd_lqueue_nums; conskbd_mux_enqueue_msg(msg); for (retry = 0, lqs = conskbd.conskbd_lqueue_list; lqs; ) { /* * if a lower physical keyboard is not in polled I/O * mode, we couldn't send CONSCLOSEPOLLEDIO to it, * otherwise, system will panic. */ if (iocp->ioc_cmd == CONSCLOSEPOLLEDIO && lqs->lqs_polledio == NULL) { lqs = lqs->lqs_next; msg->kpm_req_nums --; retry = 0; continue; } clonemp = copymsg(mp); if (clonemp != NULL) { if (putq(lqs->lqs_queue, clonemp) == 1) { lqs = lqs->lqs_next; retry = 0; continue; } /* * failed to invoke putq(), retry. */ freemsg(clonemp); } /* * During testing it was observed that occasionally * copymsg() would fail during boot. The reason for * these failures is unknown. Since we really want * to successfully plumb up all the attached keyboards * during boot we do a best effort here by retrying * the copymsg() call in the hopes that it will * succeeded upon subsequent invocations. * * If all the calls to copymsg() fails, it will cause * the corresponding keyboard to be unavailable, or * or behave weirdly, * * 1) for CONSOPENPOLLEDIO * if copymsg()fails, the corresponding keyboard * is not available in polled I/O mode once * entering kmdb; * 2) for CONSCLOSEPOLLEDIO * if copymsg() fails, the corresponding keyboard * is not available in normal mode once returning * from kmdb; * 3) for KIOCCMD * 3.1) for KBD_CMD_NOBELL * there's no beep in USB and PS2 keyboard, * this ioctl actually disables the beep on * system mainboard. Note that all the cloned * messages sent down to lower queues do the * same job for system mainboard. Therefore, * even if we fail to send this ioctl to most * of lower queues, the beep still would be * disabled. So, no trouble exists here. * 3.2) for others * nothing; * * However, all cases could be resume next time when the * same request comes again. */ if (retry ++ >= 5) { dev_t devt; char path[MAXPATHLEN + 1]; devt = lqs->lqs_queue->q_stream->sd_vnode->v_rdev; switch (iocp->ioc_cmd) { case CONSOPENPOLLEDIO: if (ddi_dev_pathname(devt, S_IFCHR, path) == DDI_SUCCESS) cmn_err(CE_WARN, "conskbd: " "keyboard is not available" " for system debugging: %s", path); break; case CONSCLOSEPOLLEDIO: if (ddi_dev_pathname(devt, S_IFCHR, path) == DDI_SUCCESS) cmn_err(CE_WARN, "conskbd: " "keyboard is not available:" " %s", path); break; default: break; } msg->kpm_req_nums --; lqs = lqs->lqs_next; retry = 0; } } if (msg->kpm_req_nums == 0) { conskbd_mux_dequeue_msg(msg); kmem_free(msg, sizeof (*msg)); miocnak(q, mp, 0, ENOMEM); } } /* conskbd_handle_downstream_msg() */ static void conskbd_ioc_plink(queue_t *q, mblk_t *mp) { mblk_t *req; queue_t *lowque; struct linkblk *linkp; conskbd_lower_queue_t *lqs; lqs = kmem_zalloc(sizeof (*lqs), KM_SLEEP); ASSERT(lqs->lqs_state == LQS_UNINITIALIZED); linkp = (struct linkblk *)mp->b_cont->b_rptr; lowque = linkp->l_qbot; lqs->lqs_queue = lowque; lqs->lqs_pending_plink = mp; lqs->lqs_pending_queue = q; req = mkiocb(CONSSETKBDTYPE); if (req == NULL) { miocnak(q, mp, 0, ENOMEM); kmem_free(lqs, sizeof (*lqs)); return; } req->b_cont = allocb(sizeof (int), BPRI_MED); if (req->b_cont == NULL) { freemsg(req); miocnak(q, mp, 0, ENOMEM); kmem_free(lqs, sizeof (*lqs)); return; } lowque->q_ptr = lqs; OTHERQ(lowque)->q_ptr = lqs; *(int *)req->b_cont->b_wptr = KB_USB; req->b_cont->b_wptr += sizeof (int); lqs->lqs_state = LQS_KIOCTYPE_ACK_PENDING; if (putq(lowque, req) != 1) { freemsg(req); miocnak(lqs->lqs_pending_queue, lqs->lqs_pending_plink, 0, ENOMEM); lowque->q_ptr = NULL; OTHERQ(lowque)->q_ptr = NULL; kmem_free(lqs, sizeof (*lqs)); } } /* conskbd_ioc_plink() */ static void conskbd_ioc_punlink(queue_t *q, mblk_t *mp) { int index; struct linkblk *linkp; conskbd_lower_queue_t *lqs; conskbd_lower_queue_t *prev; linkp = (struct linkblk *)mp->b_cont->b_rptr; prev = conskbd.conskbd_lqueue_list; for (lqs = prev; lqs; lqs = lqs->lqs_next) { if (lqs->lqs_queue == linkp->l_qbot) { if (prev == lqs) conskbd.conskbd_lqueue_list = lqs->lqs_next; else prev->lqs_next = lqs->lqs_next; lqs->lqs_queue->q_ptr = NULL; OTHERQ(lqs->lqs_queue)->q_ptr = NULL; conskbd.conskbd_lqueue_nums --; if (conskbd.conskbd_lqueue_nums == 0) { kbd_layout_bak = conskbd.conskbd_layout; conskbd.conskbd_layout = -1; } for (index = 0; index < KBTRANS_KEYNUMS_MAX; index ++) { if (lqs->lqs_key_state[index] == KEY_PRESSED) kbtrans_streams_key( conskbd.conskbd_kbtrans, index, KEY_RELEASED); } kmem_free(lqs, sizeof (*lqs)); miocack(q, mp, 0, 0); return; } prev = lqs; } miocnak(q, mp, 0, EINVAL); } /* conskbd_ioc_punlink() */ /* * Every physical keyboard has a corresponding STREAMS queue. We call this * queue lower queue. Every lower queue has a state, refer to conskbd.h file * about "enum conskbd_lqs_state". * The following routine is used to handle response messages from lower queue. * When receiving ack/nak message from lower queue(s), the routine determines * the passage for it according to the current state of this lower queue. */ static void conskbd_lqs_ack_complete(conskbd_lower_queue_t *lqs, mblk_t *mp) { switch (lqs->lqs_state) { /* S6: working in virtual keyboard mode, multi-keyboards are usable */ case LQS_INITIALIZED: conskbd_mux_upstream_msg(lqs, mp); break; /* S5: working in legacy mode, only one keyboard is usable */ case LQS_INITIALIZED_LEGACY: conskbd_legacy_upstream_msg(lqs, mp); break; /* S4: wait lower queue to acknowledge KIOCSLED/KIOCGLED message */ case LQS_KIOCSLED_ACK_PENDING: conskbd_kiocsled_complete(lqs, mp); break; /* S3: wait lower queue to acknowledge KIOCLAYOUT message */ case LQS_KIOCLAYOUT_ACK_PENDING: conskbd_kioclayout_complete(lqs, mp); break; /* S2: wait lower queue to acknowledge KIOCTRANS message */ case LQS_KIOCTRANS_ACK_PENDING: conskbd_kioctrans_complete(lqs, mp); break; /* S1: wait lower queue to acknowledge KIOCTYPE message */ case LQS_KIOCTYPE_ACK_PENDING: conskbd_kioctype_complete(lqs, mp); break; /* if reaching here, there must be a error */ default: freemsg(mp); cmn_err(CE_WARN, "conskbd: lqs_ack_complete() state error"); break; } } /* conskbd_lqs_ack_complete() */ static void conskbd_kioctype_complete(conskbd_lower_queue_t *lqs, mblk_t *mp) { struct iocblk *iocp; mblk_t *req; queue_t *lowerque; int err = ENOMEM; ASSERT(lqs->lqs_pending_plink); ASSERT(lqs->lqs_state == LQS_KIOCTYPE_ACK_PENDING); lowerque = lqs->lqs_queue; switch (mp->b_datap->db_type) { case M_IOCACK: req = mkiocb(KIOCTRANS); if (req == NULL) { goto err_exit; } req->b_cont = allocb(sizeof (int), BPRI_MED); if (req->b_cont == NULL) { freemsg(req); goto err_exit; } /* Set the translate mode to TR_UNTRANS_EVENT */ *(int *)req->b_cont->b_wptr = TR_UNTRANS_EVENT; req->b_cont->b_wptr += sizeof (int); /* Ready to handle the response to KIOCTRANS */ lqs->lqs_state = LQS_KIOCTRANS_ACK_PENDING; if (putq(lowerque, req) != 1) { freemsg(req); goto err_exit; } freemsg(mp); return; case M_IOCNAK: /* * The lower keyboard driver can't mimic USB keyboard, * that's say, the physical keyboard is an old one, such * as TYPE 3/4/5 one. In this case, the virtual keyboard * is disabled, and the data from lower keyboard driver * will bypass the conskbd module. */ /* * if there is any other keyborad already linked under the * conskbd, we reject the current one. */ if (conskbd.conskbd_lqueue_nums > 0) { iocp = (struct iocblk *)mp->b_rptr; err = iocp->ioc_error; goto err_exit; } /* * link this keyboard under conskbd. */ qwriter(lowerque, mp, conskbd_link_lowque_legacy, PERIM_OUTER); return; } err_exit: miocnak(lqs->lqs_pending_queue, lqs->lqs_pending_plink, 0, err); lowerque->q_ptr = NULL; OTHERQ(lowerque)->q_ptr = NULL; kmem_free(lqs, sizeof (*lqs)); freemsg(mp); } /* conskbd_kioctype_complete() */ static void conskbd_kioctrans_complete(conskbd_lower_queue_t *lqs, mblk_t *mp) { struct iocblk *iocp; mblk_t *req; queue_t *lowerque; int err = ENOMEM; ASSERT(lqs->lqs_pending_plink != NULL); ASSERT(lqs->lqs_state == LQS_KIOCTRANS_ACK_PENDING); lowerque = lqs->lqs_queue; switch (mp->b_datap->db_type) { case M_IOCACK: req = mkiocb(KIOCLAYOUT); if (req == NULL) { goto err_exit; } req->b_cont = allocb(sizeof (int), BPRI_MED); if (req->b_cont == NULL) { freemsg(req); goto err_exit; } /* waiting for response to KIOCLAYOUT */ lqs->lqs_state = LQS_KIOCLAYOUT_ACK_PENDING; if (putq(lqs->lqs_queue, req) != 1) { freemsg(req); goto err_exit; } freemsg(mp); return; case M_IOCNAK: iocp = (struct iocblk *)mp->b_rptr; err = iocp->ioc_error; goto err_exit; } err_exit: miocnak(lqs->lqs_pending_queue, lqs->lqs_pending_plink, 0, err); lowerque->q_ptr = NULL; OTHERQ(lowerque)->q_ptr = NULL; kmem_free(lqs, sizeof (*lqs)); freemsg(mp); } /* conskbd_kioctrans_complete() */ /* * Allocate a firm event */ static mblk_t * conskbd_alloc_firm_event(ushort_t id, int value) { mblk_t *mb; Firm_event *fe; if ((mb = allocb(sizeof (Firm_event), BPRI_HI)) != NULL) { fe = (Firm_event *)mb->b_wptr; fe->id = id; fe->pair_type = FE_PAIR_NONE; fe->pair = NULL; fe->value = value; mb->b_wptr += sizeof (Firm_event); } return (mb); } static void conskbd_kioclayout_complete(conskbd_lower_queue_t *lqs, mblk_t *mp) { mblk_t *req; int layout; boolean_t fail; ASSERT(lqs->lqs_pending_plink != NULL); ASSERT(lqs->lqs_state == LQS_KIOCLAYOUT_ACK_PENDING); switch (mp->b_datap->db_type) { case M_IOCACK: if (miocpullup(mp, sizeof (int)) == 0) { layout = *(int *)mp->b_cont->b_rptr; /* * We just accept the layout of the first keyboard * requesting to be linked under conskbd. If current * keyboard is the first one, and if we get right * layout from it, we set conskbd's layout */ if (layout != -1 && conskbd.conskbd_layout == -1) { if (layout == 0) { conskbd.conskbd_layout = kbd_layout_bak; } else { conskbd.conskbd_layout = layout; if (layout == kbd_layout_bak) { break; } if ((req = conskbd_alloc_firm_event( KEYBOARD_LAYOUT_CHANGE, layout)) != NULL) { if (conskbd.conskbd_directio) { putnext( conskbd_regqueue, req); } else if (conskbd_consqueue != NULL) { putnext( conskbd_consqueue, req); } else { freemsg(req); } } } } } break; /* if fail, leave conskbd's layout as it is */ case M_IOCNAK: break; } fail = B_TRUE; if (conskbd.conskbd_led_state == -1) req = mkiocb(KIOCGLED); else req = mkiocb(KIOCSLED); if (req) { req->b_cont = allocb(sizeof (uchar_t), BPRI_MED); if (req->b_cont) { if (conskbd.conskbd_led_state != -1) { *(uchar_t *)req->b_cont->b_wptr = conskbd.conskbd_led_state; req->b_cont->b_wptr += sizeof (uchar_t); } /* waiting for response to KIOCSLED */ lqs->lqs_state = LQS_KIOCSLED_ACK_PENDING; if (putq(lqs->lqs_queue, req) == 1) { fail = B_FALSE; } else { freemsg(req); } } else { freemsg(req); } } if (fail) { /* * If fail to allocate KIOCSLED/KIOCGLED message or put * the message into lower queue, we immediately link * current keyboard under conskbd. Thus, even if fails * to set/get LED, this keyboard could be available. */ qwriter(lqs->lqs_queue, mp, conskbd_link_lowque_virt, PERIM_OUTER); } else { freemsg(mp); } } /* conskbd_kioclayout_complete() */ static void conskbd_kiocsled_complete(conskbd_lower_queue_t *lqs, mblk_t *mp) { int led_state; ASSERT(lqs->lqs_pending_plink != NULL); ASSERT(lqs->lqs_state == LQS_KIOCSLED_ACK_PENDING); if (conskbd.conskbd_led_state == -1) { switch (mp->b_datap->db_type) { case M_IOCACK: if (miocpullup(mp, sizeof (uchar_t)) == 0) { led_state = *(uchar_t *)mp->b_cont->b_rptr; conskbd.conskbd_led_state = led_state; kbtrans_streams_setled(conskbd.conskbd_kbtrans, led_state); } break; /* if fail, leave conskbd's led_state as it is */ case M_IOCNAK: break; } } /* * Basically, failure of setting/getting LED is not a fatal * error, so we will plumb the lower queue into conskbd whether * setting/getting LED succeeds or fails. */ qwriter(lqs->lqs_queue, mp, conskbd_link_lowque_virt, PERIM_OUTER); } /* conskbd_kiocsled_complete() */ static void conskbd_mux_upstream_msg(conskbd_lower_queue_t *lqs, mblk_t *mp) { conskbd_pending_msg_t *msg; struct iocblk *iocp; int error; dev_t devt; char path[MAXPATHLEN + 1]; ASSERT(lqs->lqs_state == LQS_INITIALIZED); msg = conskbd_mux_find_msg(mp); if (!msg) { /* * Here we discard the response if: * * 1. It's an KIOCSLED request; see conskbd_streams_setled(). * 2. The application has already closed the upper stream; * see conskbdclose() */ freemsg(mp); return; } /* * We use the b_next field of mblk_t structure to link all * response coming from lower queues into a linkage list, * and make use of the b_prev field to save a pointer to * the lower queue from which the current response message * comes. */ ASSERT(mp->b_next == NULL && mp->b_prev == NULL); mutex_enter(&msg->kpm_lock); mp->b_next = msg->kpm_resp_list; mp->b_prev = (mblk_t *)lqs; msg->kpm_resp_list = mp; msg->kpm_resp_nums ++; if (msg->kpm_resp_nums < msg->kpm_req_nums) { mutex_exit(&msg->kpm_lock); return; } ASSERT(msg->kpm_resp_nums == msg->kpm_req_nums); ASSERT(mp == msg->kpm_resp_list); mutex_exit(&msg->kpm_lock); conskbd_mux_dequeue_msg(msg); /* * Here, we have the policy that, if any one lower queue ACK * our reuqest, then we return ACK to upstreams; only if all * lower queues NAK our request, we return NAK to upstreams. * if all responses are nak, the errno of the first response * is sent to upstreams */ ASSERT(mp->b_rptr); error = ((struct iocblk *)mp->b_rptr)->ioc_error; switch (msg->kpm_req_cmd) { case CONSOPENPOLLEDIO: /* * Here, we can safely ignore the NAK message. If any one lower * queue returns NAK, the pointer to the corresponding polledio * structure will remain null, that's say lqs->lqs_polledio = * null. When we need to invoke polled I/O interface, we will * check if the pointer is null. */ for (mp = msg->kpm_resp_list; mp; ) { cons_polledio_t *polledio; msg->kpm_resp_list = mp->b_next; lqs = (conskbd_lower_queue_t *)mp->b_prev; devt = lqs->lqs_queue->q_stream->sd_vnode->v_rdev; if (mp->b_datap->db_type == M_IOCACK) { polledio = *(struct cons_polledio **) mp->b_cont->b_rptr; if (polledio->cons_polledio_version == CONSPOLLEDIO_V1) { lqs->lqs_polledio = polledio; error = 0; } else { /* * USB and PS2 keyboard drivers should * use the same cons_polledio structure * as conskbd. */ if (ddi_dev_pathname(devt, S_IFCHR, path) == DDI_SUCCESS) { cmn_err(CE_WARN, "keyboard " "driver does not support " "system debugging: %s", path); } error = EINVAL; } } else { if (ddi_dev_pathname(devt, S_IFCHR, path) == DDI_SUCCESS) { cmn_err(CE_WARN, "conskbd: keyboard is" " not available for system" " debugging: %s", path); } } mp->b_next = NULL; mp->b_prev = NULL; freemsg(mp); mp = msg->kpm_resp_list; } mp = msg->kpm_req_msg; if (error == 0) { *(struct cons_polledio **)mp->b_cont->b_rptr = &conskbd.conskbd_polledio; } break; case CONSCLOSEPOLLEDIO: for (mp = msg->kpm_resp_list; mp; ) { msg->kpm_resp_list = mp->b_next; lqs = (conskbd_lower_queue_t *)mp->b_prev; if (mp->b_datap->db_type == M_IOCACK) { lqs->lqs_polledio = NULL; error = 0; } else { devt = lqs->lqs_queue->q_stream->sd_vnode->v_rdev; if (ddi_dev_pathname(devt, S_IFCHR, path) == DDI_SUCCESS) { cmn_err(CE_WARN, "conskbd: keyboard is" " not available: %s", path); } } mp->b_next = NULL; mp->b_prev = NULL; freemsg(mp); mp = msg->kpm_resp_list; } break; case KIOCCMD: case KIOCMKTONE: for (mp = msg->kpm_resp_list; mp; ) { msg->kpm_resp_list = mp->b_next; if (mp->b_datap->db_type == M_IOCACK) error = 0; mp->b_next = NULL; mp->b_prev = NULL; freemsg(mp); mp = msg->kpm_resp_list; } break; default: /* it is impossible to reach here */ cmn_err(CE_WARN, "conskbd: unexpected ioctl reply"); } mp = msg->kpm_req_msg; if (error == 0) { mp->b_datap->db_type = M_IOCACK; } else { mp->b_datap->db_type = M_IOCNAK; } iocp = (struct iocblk *)mp->b_rptr; iocp->ioc_error = error; qreply(msg->kpm_upper_queue, mp); mutex_destroy(&msg->kpm_lock); kmem_free(msg, sizeof (*msg)); } /* conskbd_mux_upstream_msg() */ static void conskbd_link_lowque_legacy(queue_t *lowque, mblk_t *mp) { conskbd_lower_queue_t *lqs; freemsg(mp); /* * Bypass the virutal keyboard for old hardware, * Now, only current legacy keyboard can be linked * under conskbd */ conskbd.conskbd_bypassed = B_TRUE; /* * Link the lower queue under conskbd */ lqs = (conskbd_lower_queue_t *)lowque->q_ptr; lqs->lqs_state = LQS_INITIALIZED_LEGACY; lqs->lqs_next = conskbd.conskbd_lqueue_list; conskbd.conskbd_lqueue_list = lqs; conskbd.conskbd_lqueue_nums++; mioc2ack(lqs->lqs_pending_plink, NULL, 0, 0); qreply(lqs->lqs_pending_queue, lqs->lqs_pending_plink); } /* conskbd_link_lowque_legacy() */ static void conskbd_link_lowque_virt(queue_t *lowque, mblk_t *mp) { int index; conskbd_lower_queue_t *lqs; freemsg(mp); lqs = (conskbd_lower_queue_t *)lowque->q_ptr; ASSERT(lqs->lqs_queue == lowque); ASSERT(lqs->lqs_pending_plink != NULL); /* * Now, link the lower queue under conskbd */ for (index = 0; index < KBTRANS_KEYNUMS_MAX; index ++) { lqs->lqs_key_state[index] = KEY_RELEASED; } lqs->lqs_next = conskbd.conskbd_lqueue_list; lqs->lqs_state = LQS_INITIALIZED; conskbd.conskbd_lqueue_nums++; conskbd.conskbd_lqueue_list = lqs; mioc2ack(lqs->lqs_pending_plink, NULL, 0, 0); qreply(lqs->lqs_pending_queue, lqs->lqs_pending_plink); } /* conskbd_link_lowque_virt() */ /*ARGSUSED*/ static void conskbd_legacy_upstream_msg(conskbd_lower_queue_t *lqs, mblk_t *mp) { struct iocblk *iocp; ASSERT(lqs && lqs->lqs_state == LQS_INITIALIZED_LEGACY); /* * We assume that all of the ioctls are headed to the * conskbd_regqueue if it is open. We are intercepting a few ioctls * that we know belong to conskbd_consqueue, and sending them there. * Any other, new ioctls that have to be routed to conskbd_consqueue * should be added to this list. */ iocp = (struct iocblk *)mp->b_rptr; if ((iocp->ioc_cmd == CONSOPENPOLLEDIO) || (iocp->ioc_cmd == CONSCLOSEPOLLEDIO)) { DPRINTF(PRINT_L1, PRINT_MASK_ALL, ("conskbd_legacy_upstream_msg: " "CONSOPEN/CLOSEPOLLEDIO ACK/NAK\n")); putnext(conskbd_consqueue, mp); } else if (conskbd_regqueue != NULL) { DPRINTF(PRINT_L1, PRINT_MASK_ALL, ("conskbd_legacy_upstream_msg: conskbd_regqueue != NULL")); putnext(conskbd_regqueue, mp); } else if (conskbd_consqueue != NULL) { DPRINTF(PRINT_L1, PRINT_MASK_ALL, ("conskbd_legacy_upstream_msg: conskbd_consqueue != NULL")); putnext(conskbd_consqueue, mp); } else { /* if reached here, it must be a error */ cmn_err(CE_WARN, "kb: no destination for IOCACK/IOCNAK!"); freemsg(mp); } } /* conskbd_legacy_upstream_msg() */ /* * This routine is a callback routine for kbtrans module to set LED. * Kbtrans will invoke it in two cases: * * 1) application initiated request * A KIOCSLED ioctl is sent by an application. The ioctl will be * be prcoessed by queue service procedure conskbduwsrv(), which * in turn calls kbtrans to process the ioctl. Then kbtrans invokes * conskbd_streams_setled() to set LED, after that, kbtrans will * return an ACK message to upper module. * * 2) Kbtrans initiated the request * When conskbd works in TR_ASCII translation mode, if anyone of * CapsLock, NumberLock and Compose keys is pressed, kbtrans need * to set LED. In this case, there is no ioctl from upper module. * There is no requirement to send response to somebody. * * In first case, kbtrans will send response to upper module; and in the * second, we don't need to send response. So conskbd_streams_setled() * has no return value. */ static void conskbd_streams_setled(struct kbtrans_hardware *hw, int led_state) { conskbd_state_t *conskbdp = (conskbd_state_t *)hw; conskbd_lower_queue_t *lqs; mblk_t *req; ASSERT(&conskbd == conskbdp); if (led_state == -1) return; conskbdp->conskbd_led_state = led_state; /* * Basically, failing to set LED is not a fatal error, we just skip * it if this happens. */ for (lqs = conskbdp->conskbd_lqueue_list; lqs; lqs = lqs->lqs_next) { req = mkiocb(KIOCSLED); if (!req) { continue; } req->b_cont = allocb(sizeof (uchar_t), BPRI_MED); if (!req->b_cont) { freemsg(req); continue; } *(uchar_t *)req->b_cont->b_wptr = led_state; req->b_cont->b_wptr += sizeof (uchar_t); if (putq(lqs->lqs_queue, req) != 1) freemsg(req); } } /* conskbd_streams_setled() */ static void conskbd_polledio_setled(struct kbtrans_hardware *hw, int led_state) { conskbd_state_t *conskbdp = (conskbd_state_t *)hw; struct cons_polledio *cb; conskbd_lower_queue_t *lqs; for (lqs = conskbdp->conskbd_lqueue_list; lqs; lqs = lqs->lqs_next) { cb = lqs->lqs_polledio; if ((cb != NULL) && (cb->cons_polledio_setled != NULL)) { cb->cons_polledio_setled(cb->cons_polledio_argument, led_state); } } } /* conskbd_polledio_setled() */ static boolean_t conskbd_polled_keycheck(struct kbtrans_hardware *hw, kbtrans_key_t *keycode, enum keystate *state) { conskbd_state_t *conskbdp = (conskbd_state_t *)hw; struct cons_polledio *cb; conskbd_lower_queue_t *lqs; boolean_t ret = B_FALSE; for (ret = B_FALSE, lqs = conskbdp->conskbd_lqueue_list; lqs != NULL; lqs = lqs->lqs_next) { cb = lqs->lqs_polledio; if ((cb != NULL) && (cb->cons_polledio_keycheck != NULL)) { ret = cb->cons_polledio_keycheck( cb->cons_polledio_argument, keycode, state); } /* Get a char from lower queue(hardware) ? */ if (ret == B_TRUE) { /* A legacy keyboard ? */ if (conskbd.conskbd_bypassed == B_TRUE) break; /* * This is the PS2 scancode 0x2B -> USB(49) / * USB(50) keycode mapping workaround, for * polled mode. * * There are two possible USB keycode mappings * for PS2 scancode 0x2B and this workaround * makes sure that we use the USB keycode that * does not end up being mapped to a HOLE key * using the current keyboard translation * tables. * * See conskbdlrput() for a detailed * explanation of the problem. */ if (*keycode == 49 || *keycode == 50) { if (conskbd_keyindex->k_normal[50] == HOLE) *keycode = 49; else *keycode = 50; } break; } } return (ret); } /* conskbd_polled_keycheck() */ static boolean_t conskbd_override_kbtrans(queue_t *q, mblk_t *mp) { struct iocblk *iocp; int directio; int error; if (mp->b_datap->db_type != M_IOCTL) return (B_FALSE); iocp = (struct iocblk *)mp->b_rptr; switch (iocp->ioc_cmd) { case KIOCGDIRECT: { /* * Don't let the kbtrans-based code see this; it will * respond incorrectly. */ register mblk_t *datap; if ((datap = allocb((int)sizeof (int), BPRI_MED)) == NULL) { miocnak(q, mp, 0, ENOMEM); return (B_TRUE); } *(int *)datap->b_wptr = conskbd.conskbd_directio; datap->b_wptr += sizeof (int); if (mp->b_cont) { freemsg(mp->b_cont); mp->b_cont = NULL; } mp->b_cont = datap; miocack(q, mp, sizeof (int), 0); return (B_TRUE); } case KIOCSDIRECT: /* * Peek at this, set our variables, and then let the kbtrans * based code see it and respond to it. */ error = miocpullup(mp, sizeof (int)); if (error != 0) { return (B_FALSE); } directio = *(int *)mp->b_cont->b_rptr; if (directio != 0 && directio != 1) { miocnak(q, mp, 0, EINVAL); return (B_TRUE); } conskbd.conskbd_directio = directio; if (conskbd.conskbd_directio) { kbtrans_streams_set_queue( conskbd.conskbd_kbtrans, conskbd_regqueue); } else { kbtrans_streams_set_queue( conskbd.conskbd_kbtrans, conskbd_consqueue); } /* * Let the kbtrans-based code see this and respond to it. */ return (B_FALSE); default: return (B_FALSE); } } /* conskbd_override_kbtrans() */ static void conskbd_polledio_enter(cons_polledio_arg_t arg) { conskbd_state_t *conskbdp; struct cons_polledio *cb; conskbd_lower_queue_t *lqs; conskbdp = (conskbd_state_t *)arg; for (lqs = conskbdp->conskbd_lqueue_list; lqs; lqs = lqs->lqs_next) { cb = lqs->lqs_polledio; if ((cb != NULL) && (cb->cons_polledio_enter != NULL)) { cb->cons_polledio_enter(cb->cons_polledio_argument); } } } /* conskbd_polledio_enter() */ static void conskbd_polledio_exit(cons_polledio_arg_t arg) { conskbd_state_t *conskbdp; struct cons_polledio *cb; conskbd_lower_queue_t *lqs; conskbdp = (conskbd_state_t *)arg; for (lqs = conskbdp->conskbd_lqueue_list; lqs; lqs = lqs->lqs_next) { cb = lqs->lqs_polledio; if ((cb != NULL) && (cb->cons_polledio_exit != NULL)) { cb->cons_polledio_exit(cb->cons_polledio_argument); } } } /* conskbd_polledio_exit() */ static int conskbd_polledio_getchar(cons_polledio_arg_t arg) { conskbd_state_t *conskbdp; conskbdp = (conskbd_state_t *)arg; return (kbtrans_getchar(conskbdp->conskbd_kbtrans)); } /* conskbd_polledio_getchar() */ static int conskbd_polledio_ischar(cons_polledio_arg_t arg) { conskbd_state_t *conskbdp; conskbdp = (conskbd_state_t *)arg; return (kbtrans_ischar(conskbdp->conskbd_kbtrans)); } /* conskbd_polledio_ischar() */ static void conskbd_mux_enqueue_msg(conskbd_pending_msg_t *msg) { mutex_enter(&conskbd_msgq_lock); msg->kpm_next = conskbd_msg_queue; conskbd_msg_queue = msg; mutex_exit(&conskbd_msgq_lock); } /* conskbd_mux_enqueue_msg() */ /* * the messages in conskbd_msg_queue we just enqueue */ static conskbd_pending_msg_t * conskbd_mux_find_msg(mblk_t *mp) { conskbd_pending_msg_t *msg; struct iocblk *iocp; uint_t id; mutex_enter(&conskbd_msgq_lock); msg = conskbd_msg_queue; iocp = (struct iocblk *)mp->b_rptr; ASSERT(iocp); id = iocp->ioc_id; while (msg && msg->kpm_req_id != id) { msg = msg->kpm_next; } mutex_exit(&conskbd_msgq_lock); return (msg); } /* conskbd_mux_find_msg() */ static void conskbd_mux_dequeue_msg(conskbd_pending_msg_t *msg) { conskbd_pending_msg_t *prev; conskbd_pending_msg_t *p; mutex_enter(&conskbd_msgq_lock); prev = conskbd_msg_queue; for (p = prev; p && p != msg; p = p->kpm_next) prev = p; ASSERT(p && p == msg); if (prev == p) { conskbd_msg_queue = msg->kpm_next; } else { prev->kpm_next = p->kpm_next; } p->kpm_next = NULL; mutex_exit(&conskbd_msgq_lock); } /* conskbd_mux_dequeue_msg() */ #ifdef DEBUG /*ARGSUSED*/ void conskbd_dprintf(const char *fmt, ...) { char buf[256]; va_list ap; va_start(ap, fmt); (void) vsprintf(buf, fmt, ap); va_end(ap); cmn_err(CE_CONT, "conskbd: %s", buf); } /* conskbd_dprintf() */ #endif