/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright (c) 2007, 2010, Oracle and/or its affiliates. All rights reserved.
 * Copyright 2013 Nexenta Systems, Inc.  All rights reserved.
 */

/*
 * SMB print interface.
 */

#include <smbsrv/smb_kproto.h>
#include <sys/unistd.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <sys/fcntl.h>
#include <smbsrv/smb_share.h>

/*
 * Starts the creation of a new printer file, which will be deleted
 * automatically once it has been closed and printed.
 *
 * SetupLength is the number of bytes in the first part of the resulting
 * print spool file which contains printer-specific control strings.
 *
 * Mode can have the following values:
 *      0     Text mode.  The server may optionally
 *            expand tabs to a series of spaces.
 *      1     Graphics mode.  No conversion of data
 *            should be done by the server.
 *
 * IdentifierString can be used by the server to provide some sort of
 * per-client identifying component to the print file.
 *
 * When the file is closed, it will be sent to the spooler and printed.
 */
smb_sdrc_t
smb_pre_open_print_file(smb_request_t *sr)
{
	struct open_param	*op = &sr->arg.open;
	char			*path;
	char			*identifier;
	uint32_t		new_id;
	uint16_t		setup;
	uint16_t		mode;
	int			rc;
	static uint32_t		tmp_id = 10000;

	bzero(op, sizeof (sr->arg.open));
	rc = smbsr_decode_vwv(sr, "ww", &setup, &mode);
	if (rc == 0)
		rc = smbsr_decode_data(sr, "%S", sr, &identifier);

	if (rc == 0) {
		path = smb_srm_zalloc(sr, MAXPATHLEN);
		op->fqi.fq_path.pn_path = path;
		new_id = atomic_inc_32_nv(&tmp_id);
		(void) snprintf(path, MAXPATHLEN, "%s%05u", identifier, new_id);
	}

	op->create_disposition = FILE_OVERWRITE_IF;
	op->create_options = FILE_NON_DIRECTORY_FILE;
	DTRACE_SMB_2(op__OpenPrintFile__start, smb_request_t *, sr,
	    struct open_param *, op);

	return ((rc == 0) ? SDRC_SUCCESS : SDRC_ERROR);
}

void
smb_post_open_print_file(smb_request_t *sr)
{
	DTRACE_SMB_1(op__OpenPrintFile__done, smb_request_t *, sr);
}

/*
 * Creates a new spool file which will be later copied and
 * deleted by cupsd.  After the file is created, information
 * related to the file will be placed in a spooldoc list
 * to be later used by cupsd
 *
 * Return values
 * 	rc 0 SDRC_SUCCESS
 *	rc non-zero SDRC_ERROR
 */

smb_sdrc_t
smb_com_open_print_file(smb_request_t *sr)
{
	int 		rc;
	smb_kspooldoc_t *sp;
	smb_kshare_t 	*si;
	struct open_param *op = &sr->arg.open;

	if (sr->sr_server->sv_cfg.skc_print_enable == 0 ||
	    !STYPE_ISPRN(sr->tid_tree->t_res_type)) {
		cmn_err(CE_WARN, "smb_com_open_print_file: bad device");
		smbsr_error(sr, NT_STATUS_BAD_DEVICE_TYPE,
		    ERRDOS, ERROR_BAD_DEV_TYPE);
		return (SDRC_ERROR);
	}
	if ((rc = smb_common_create(sr)) != NT_STATUS_SUCCESS) {
		cmn_err(CE_WARN, "smb_com_open_print_file: error rc=%d", rc);
		return (SDRC_ERROR);
	}
	if ((rc = smbsr_encode_result(sr, 1, 0,
	    "bww", 1, sr->smb_fid, 0)) == 0) {
		if ((si = smb_kshare_lookup(SMB_SHARE_PRINT)) == NULL) {
			cmn_err(CE_NOTE, "smb_com_open_print_file: SDRC_ERROR");
			return (SDRC_ERROR);
		}
		sp = kmem_zalloc(sizeof (smb_kspooldoc_t), KM_SLEEP);
		(void) snprintf(sp->sd_path, MAXPATHLEN, "%s/%s", si->shr_path,
		    op->fqi.fq_path.pn_path);
		/* sp->sd_spool_num set by smb_spool_add_doc() */
		sp->sd_ipaddr = sr->session->ipaddr;
		(void) strlcpy(sp->sd_username, sr->uid_user->u_name,
		    MAXNAMELEN);
		sp->sd_fid = sr->smb_fid;
		if (smb_spool_add_doc(sp))
			kmem_free(sp, sizeof (smb_kspooldoc_t));
		smb_kshare_release(si);
	}
	return ((rc == 0) ? SDRC_SUCCESS : SDRC_ERROR);
}

/*
 * Close the specified file handle and queue the file for printing.
 * The fid refers to a file previously created as a print spool file.
 * On successful completion of this request, the file is queued for
 * printing by the server.
 *
 * Servers that negotiate LANMAN1.0 or later allow all the the fid
 * to be closed and printed via any close request.
 */
smb_sdrc_t
smb_pre_close_print_file(smb_request_t *sr)
{
	int rc;

	rc = smbsr_decode_vwv(sr, "w", &sr->smb_fid);

	DTRACE_SMB_1(op__ClosePrintFile__start, smb_request_t *, sr);
	return ((rc == 0) ? SDRC_SUCCESS : SDRC_ERROR);
}

void
smb_post_close_print_file(smb_request_t *sr)
{
	DTRACE_SMB_1(op__ClosePrintFile__done, smb_request_t *, sr);
}

/*
 *
 * Adds the print file fid to a list to be used as a search
 * key in the spooldoc list.  It then wakes up the smbd
 * spool monitor thread to copy the spool file.
 *
 * Return values
 * rc - 0 success
 *
 */

smb_sdrc_t
smb_com_close_print_file(smb_request_t *sr)
{
	smb_sdrc_t rc;

	/*
	 * If sv_cfg.skc_print_enable somehow went false while
	 * we have a print FID open, close the FID.  In this
	 * situation, smb_spool_add_fid() will do nothing.
	 */
	if (!STYPE_ISPRN(sr->tid_tree->t_res_type)) {
		smbsr_error(sr, NT_STATUS_BAD_DEVICE_TYPE,
		    ERRDOS, ERROR_BAD_DEV_TYPE);
		cmn_err(CE_WARN, "smb_com_close_print_file: SDRC_ERROR");
		return (SDRC_ERROR);
	}
	rc = smb_com_close(sr);

	smb_spool_add_fid(sr->sr_server, sr->smb_fid);

	return (rc);
}

/*
 * Get a list of print queue entries on the server.  Support for
 * this request is optional (not required for Windows clients).
 */
smb_sdrc_t
smb_pre_get_print_queue(smb_request_t *sr)
{
	DTRACE_SMB_1(op__GetPrintQueue__start, smb_request_t *, sr);
	return (SDRC_SUCCESS);
}

void
smb_post_get_print_queue(smb_request_t *sr)
{
	DTRACE_SMB_1(op__GetPrintQueue__done, smb_request_t *, sr);
}

smb_sdrc_t
smb_com_get_print_queue(smb_request_t *sr)
{
	unsigned short max_count, start_ix;

	if (smbsr_decode_vwv(sr, "ww", &max_count, &start_ix) != 0)
		return (SDRC_ERROR);

	if (smbsr_encode_result(sr, 2, 3, "bwwwbw", 2, 0, 0, 3, 1, 0))
		return (SDRC_ERROR);

	return (SDRC_SUCCESS);
}

/*
 * Write (append) data to a print spool file.  The fid must refer to
 * a print spool file.
 *
 * The first SetupLength bytes (see SMB_COM_OPEN_PRINT_FILE) in the
 * print spool file contain printer setup data.
 *
 * Servers that negotiate LANMAN1.0 or later also support the use of
 * normal write requests with print spool files.
 */
smb_sdrc_t
smb_pre_write_print_file(smb_request_t *sr)
{
	smb_rw_param_t	*param;
	int		rc;

	param = kmem_zalloc(sizeof (smb_rw_param_t), KM_SLEEP);
	sr->arg.rw = param;
	param->rw_magic = SMB_RW_MAGIC;

	rc = smbsr_decode_vwv(sr, "w", &sr->smb_fid);

	DTRACE_SMB_1(op__WritePrintFile__start, smb_request_t *, sr);
	return ((rc == 0) ? SDRC_SUCCESS : SDRC_ERROR);
}

void
smb_post_write_print_file(smb_request_t *sr)
{
	DTRACE_SMB_1(op__WritePrintFile__done, smb_request_t *, sr);

	kmem_free(sr->arg.rw, sizeof (smb_rw_param_t));
}

smb_sdrc_t
smb_com_write_print_file(smb_request_t *sr)
{
	smb_rw_param_t	*param = sr->arg.rw;
	smb_node_t	*node;
	smb_attr_t	attr;
	int		rc;

	if (sr->sr_server->sv_cfg.skc_print_enable == 0 ||
	    !STYPE_ISPRN(sr->tid_tree->t_res_type)) {
		smbsr_error(sr, NT_STATUS_BAD_DEVICE_TYPE,
		    ERRDOS, ERROR_BAD_DEV_TYPE);
		return (SDRC_ERROR);
	}

	smbsr_lookup_file(sr);
	if (sr->fid_ofile == NULL) {
		smbsr_error(sr, NT_STATUS_INVALID_HANDLE, ERRDOS, ERRbadfid);
		return (SDRC_ERROR);
	}

	node = sr->fid_ofile->f_node;
	sr->user_cr = smb_ofile_getcred(sr->fid_ofile);

	bzero(&attr, sizeof (attr));
	attr.sa_mask = SMB_AT_SIZE;
	rc = smb_node_getattr(sr, node, sr->user_cr, sr->fid_ofile, &attr);
	if (rc != 0) {
		smbsr_error(sr, NT_STATUS_INTERNAL_ERROR,
		    ERRDOS, ERROR_INTERNAL_ERROR);
		return (SDRC_ERROR);
	}

	if ((smbsr_decode_data(sr, "D", &param->rw_vdb)) != 0) {
		smbsr_error(sr, NT_STATUS_INVALID_PARAMETER,
		    ERRDOS, ERROR_INVALID_PARAMETER);
		return (SDRC_ERROR);
	}

	param->rw_count = param->rw_vdb.vdb_len;
	param->rw_offset = attr.sa_vattr.va_size;
	param->rw_vdb.vdb_uio.uio_loffset = (offset_t)param->rw_offset;

	if ((rc = smb_common_write(sr, param)) != 0) {
		if (sr->smb_error.status != NT_STATUS_FILE_LOCK_CONFLICT)
			smbsr_errno(sr, rc);
		return (SDRC_ERROR);
	}

	rc = smbsr_encode_empty_result(sr);
	return ((rc == 0) ? SDRC_SUCCESS : SDRC_ERROR);
}