'\" te
.\"  Copyright (c) 2004, Sun Microsystems, Inc. All Rights Reserved
.\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
.\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
.\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
.TH gld 7D "10 Nov 2005" "SunOS 5.11" "Devices"
.SH NAME
gld \- Generic \fBLAN\fR Driver
.SH SYNOPSIS
.LP
.nf
\fB#include\fR \fB<sys/stropts.h>\fR 
.fi

.LP
.nf
\fB#include\fR \fB<sys/stream.h>\fR 
.fi

.LP
.nf
\fB#include\fR \fB<sys/dlpi.h>\fR 
.fi

.LP
.nf
\fB#include\fR \fB<sys/gld.h>\fR 
.fi

.SH INTERFACE LEVEL
.sp
.LP
Solaris architecture specific (Solaris DDI).
.SH DESCRIPTION
.sp
.LP
GLD is a multi-threaded, clonable, loadable kernel module providing support for
Solaris local area network  (\fBLAN\fR) device drivers. \fBLAN\fR drivers in
Solaris are \fBSTREAMS\fR-based drivers that use the Data Link Provider
Interface (\fBDLPI\fR) to communicate with network protocol stacks. These
protocol stacks use the network drivers to send and receive packets on a local
area network. A network device driver must implement and adhere to the
requirements imposed by the DDI/DKI specification, \fBSTREAMS\fR specification,
DLPI specification, and programmatic interface of the device itself.
.sp
.LP
GLD implements most \fBSTREAMS\fR and DLPI functionality required of a Solaris
LAN driver. Several Solaris network drivers are implemented using GLD.
.sp
.LP
A Solaris network driver implemented using GLD comprises two distinct parts: a
generic component that deals with \fBSTREAMS\fR and DLPI interfaces, and a
device-specific component that deals with the particular hardware device. The
device-specific module indicates its dependency on the GLD module and registers
itself with GLD from within the driver's \fBattach\fR(9E) function. Once it is
successfully loaded, the driver is \fBDLPI\fR-compliant. The device-specific
part of the driver calls \fBgld\fR(9F) functions when it receives data or needs
some service from GLD. GLD makes calls into the \fBgld\fR(9E) entry points of
the device-specific driver through pointers provided to GLD by the
device-specific driver when it registered itself with GLD. The
\fBgld_mac_info\fR(9S) structure is the main data interface between GLD and the
device-specific driver.
.sp
.LP
The GLD facility currently supports devices of type \fBDL_ETHER\fR,
\fBDL_TPR\fR, and \fBDL_FDDI\fR. GLD drivers are expected to process
fully-formed MAC-layer packets and should not perform logical link control
(LLC) handling.
.LP
Note -
.sp
.RS 2
Support for the DL_TPR and DL_FDDI media types in GLD is obsolete and may be
removed in a future release of Solaris.
.RE
.sp
.LP
In some cases, it may be necessary or desirable to implement a full
DLPI-compliant driver without using the GLD facility. This is true for devices
that are not IEEE 802-style LAN devices, or where a device type or DLPI service
not supported by GLD is required.
.SS "Device Naming Constraints"
.sp
.LP
The name of the device-specific driver module must adhere to the naming
constraints outlined in the NOTES section of \fBdlpi\fR(7P).
.SS "Type DL_ETHER: Ethernet V2 and ISO 8802-3 (IEEE 802.3)"
.sp
.LP
For devices designated type \fBDL_ETHER\fR, GLD provides support for both
Ethernet V2 and ISO 8802-3 (IEEE 802.3) packet processing. Ethernet V2 enables
a data link service user to access and use any of a variety of conforming data
link service providers without special knowledge of the provider's protocol. A
service access point (\fBSAP\fR) is the point through which the user
communicates with the service provider.
.sp
.LP
SAP 0 denotes  that the  user  wishes to use \fI802.3\fR mode. In transmission,
GLD checks the destination SAP value of the DL_UNITDATA_REQ and the SAP value
to which the stream is bound. If both  are 0, the GLD computes the length of
the packet payload and transmits \fI802.3\fR frames having that length in the
MAC frame header type field. Such lengths will never exceed 1500.
.sp
.LP
All frames received from the media that have a type field in the range [0-1500]
are assumed to be \fI802.3\fR frames and are routed up all open streams that
are in \fI802.3\fR mode,  (those streams  bound to a SAP value in of 0. If more
than one stream is in \fI802.3\fR mode, the incoming frame is duplicated and
routed up each such stream.
.sp
.LP
Streams  bound to  a  SAP  value of  1536 or greater receive incoming packets
whose Ethernet MAC header type value exactly matches the value of the SAP to
which the stream is bound. SAP values in the range [1-1535] are undefined and
should not be used.
.SS "Types DL_TPR and DL_FDDI: SNAP Processing"
.LP
Note -
.sp
.RS 2
Support for the DL_TPR and DL_FDDI media types in GLD is obsolete and may be
removed in a future release of Solaris.
.RE
.sp
.LP
For media types DL_TPR and DL_FDDI, GLD implements  minimal SNAP (Sub-Net
Access Protocol)  processing for SAP values of 1536  or greater. A SAP value of
0 denotes that the user wishes to use LLC mode. SAP values in  the range
[1-1535] have undefined semantics and should not be used.
.sp
.LP
\fBSNAP\fR headers are carried under LLC headers with destination SAP 0xAA. For
outgoing packets with SAP values greater than 1535, GLD creates an LLC+SNAP
header that always looks like:
.sp
.LP
``AA AA 03 00 00 00 XX XX''
.sp
.LP
where ``XX XX'' represents the 16-bit SAP, corresponding  to the  Ethernet V2
style ``type.'' This is the only class of SNAP header that is processed -
non-zero OUI fields, and LLC control fields  other than 03 are considered to be
LLC packets with SAP 0xAA.
.sp
.LP
A DL_UNITDATA_REQ  message specifying  a destination  SAP value of 0, passed
down a stream bound to SAP 0, is assumed     to  contain  an  LLC  packet and
will not undergo  SNAP processing.
.sp
.LP
Incoming packets are examined to ascertain whether they fall into  the format
specified above. Packets that do will be passed to streams bound to the
packet's 16-bit SNAP type, as well as being passed to any stream in LLC mode
(those bound to a SAP value of 0).
.SS "Type DL_TPR: Source Routing"
.LP
Note -
.sp
.RS 2
Support for the DL_TPR media type in GLD is obsolete and may be removed in a
future release of Solaris.
.RE
.sp
.LP
For type \fBDL_TPR\fR devices, GLD implements minimal support for source
routing. Source routing enables a station that is sending a packet across a
bridged medium to specify (in the packet MAC header) routing information that
determines the route that the packet will take through the network.
.sp
.LP
Functionally, the source routing support provided by GLD learns routes,
solicits and responds to requests for information about possible multiple
routes and selects among the multiple routes that are available. It adds
\fIRouting Information Fields\fR to the MAC headers of outgoing packets and
recognizes such fields in incoming packets.
.sp
.LP
GLD's source routing support does not implement the full \fIRoute Determination
Entity\fR \fB(RDE)\fR specified in \fIISO 8802-2 (IEEE 802.2)\fR Section 9.
However, it is designed to interoperate with any such implementations that may
exist in the same (or a bridged) network.
.SS "Style 1 and 2 Providers"
.sp
.LP
GLD implements both Style 1 and Style 2 providers. A physical point of
attachment (\fBPPA\fR) is the point at which a system attaches itself to a
physical communication medium. All communication on that physical medium
funnels through the \fBPPA\fR. The Style 1 provider attaches the stream to a
particular \fBPPA\fR based on the major/minor device that has been opened. The
Style 2 provider requires the DLS user to explicitly identify the desired
\fBPPA\fR using \fBDL_ATTACH_REQ.\fR In this case, \fBopen\fR(9E) creates a
stream between the user and GLD and \fBDL_ATTACH_REQ\fR subsequently associates
a particular \fBPPA\fR with that stream. Style 2 is denoted by a minor number
of zero. If a device node whose minor number is not zero is opened, Style 1 is
indicated and the associated \fBPPA\fR is the minor number minus 1. In both
Style 1 and Style 2 opens, the device is cloned.
.SS "Implemented DLPI Primitives"
.sp
.LP
GLD implements the following DLPI primitives:
.sp
.LP
The \fBDL_INFO_REQ\fR primitive requests information about the DLPI stream. The
message consists of one \fBM_PROTO\fR message block. GLD returns
device-dependent values in the \fBDL_INFO_ACK\fR response to this request,
based on information the GLD-based driver specified in the
\fBgld_mac_info\fR(9S) structure passed to \fBgld_register()\fR. However GLD
returns the following values on behalf of all GLD-based drivers:
.RS +4
.TP
.ie t \(bu
.el o
The version is \fBDL_VERSION_2\fR.
.RE
.RS +4
.TP
.ie t \(bu
.el o
The service mode is \fBDL_CLDLS\fR \(em GLD implements connectionless-mode
service.
.RE
.RS +4
.TP
.ie t \(bu
.el o
The provider style is \fBDL_STYLE1\fR or \fBDL_STYLE2,\fR depending on how the
stream was opened.
.RE
.sp
.LP
The \fBDL_ATTACH_REQ\fR primitive is called to associate a \fBPPA\fR with a
stream. This request is needed for Style 2 DLS providers to identify the
physical medium over which the communication will transpire. Upon completion,
the state changes from \fBDL_UNATTACHED\fR to \fBDL_UNBOUND.\fR The message
consists of one \fBM_PROTO\fR message block. This request may not be issued
when using the driver in Style 1 mode; streams opened using Style 1 are already
attached to a \fBPPA\fR by the time the open completes.
.sp
.LP
The \fBDL_DETACH_REQ\fR primitive requests to detach the \fBPPA\fR from the
stream. This is only allowed if the stream was opened using Style 2.
.sp
.LP
The \fBDL_BIND_REQ\fR and \fBDL_UNBIND_REQ\fR primitives bind and unbind a
\fBDLSAP\fR to the stream. The \fBPPA\fR associated with each stream will have
been initialized upon completion of the processing of the \fBDL_BIND_REQ.\fR
Multiple streams may be bound to the same \fBSAP\fR; each such stream receives
a copy of any packets received for that SAP.
.sp
.LP
The \fBDL_ENABMULTI_REQ\fR and \fBDL_DISABMULTI_REQ\fR primitives enable and
disable reception of individual multicast group addresses. A set of multicast
addresses may be iteratively created and modified on a per-stream basis using
these primitives. The stream must be attached to a \fBPPA\fR for these
primitives to be accepted.
.sp
.LP
The \fBDL_PROMISCON_REQ\fR and \fBDL_PROMISCOFF_REQ\fR primitives enable and
disable promiscuous mode on a per-stream basis, either at a physical level or
at the \fBSAP\fR level. The DL Provider will route all received messages on the
media to the DLS user until either a \fBDL_DETACH_REQ\fR or a
\fBDL_PROMISCOFF_REQ\fR is received or the stream is closed. Physical level
promiscuous mode may be specified for all packets on the medium or for
multicast packets only. The stream must be attached to a \fBPPA\fR for these
primitives to be accepted.
.sp
.LP
The \fBDL_UNITDATA_REQ\fR primitive is used to send data in a connectionless
transfer. Because this is an unacknowledged service, there is no guarantee of
delivery. The message consists of one \fBM_PROTO\fR message block followed by
one or more \fBM_DATA\fR blocks containing at least one byte of data.
.sp
.LP
The \fBDL_UNITDATA_IND\fR type is used when a packet is received and is to be
passed upstream. The packet is put into an \fBM_PROTO\fR message with the
primitive set to \fBDL_UNITDATA_IND\fR.
.sp
.LP
The \fBDL_PHYS_ADDR_REQ\fR primitive returns the MAC address currently
associated with the \fBPPA\fR attached to the stream, in the
\fBDL_PHYS_ADDR_ACK\fR primitive. When using style 2, this primitive is only
valid following a successful \fBDL_ATTACH_REQ\fR.
.sp
.LP
The \fBDL_SET_PHYS_ADDR_REQ\fR primitive changes the MAC address currently
associated with the \fBPPA\fR attached to the stream. This primitive affects
all other current and future streams attached to this device. Once changed, all
streams currently or subsequently opened and attached to this device will
obtain this new physical address. The new physical address will remain in
effect until this primitive is used to change the physical address again or the
driver is reloaded.
.sp
.LP
The \fBDL_GET_STATISTICS_REQ\fR primitive requests a
\fBDL_GET_STATISTICS_ACK\fR response containing statistics information
associated with the PPA attached to the stream. Style 2 streams must be
attached to a particular \fBPPA\fR using \fBDL_ATTACH_REQ\fR before this
primitive will be successful.
.sp
.LP
GLD supports the DL_NOTE_LINK_UP, DL_NOTE_LINK_DOWN and DL_NOTE_SPEED
notifications using the DL_NOTIFY_IND primitive. See \fBdlpi\fR(7P).
.SS "Implemented ioctl Functions"
.sp
.LP
GLD implements the \fBDLIOCRAW\fR ioctl described in \fBdlpi\fR(7P).  For any
other ioctl command, GLD passes it to the device-specific driver's
\fBgldm_ioctl()\fR function as described in \fBgld\fR(9E).
.SS "Requirements on GLD Drivers"
.sp
.LP
GLD-based drivers must include the header file \fB<sys/gld.h>\fR\&.
.sp
.LP
GLD-based  drivers  must also specify  a link dependency on "misc/gld". (See
the -N option in \fBld\fR(1)).
.sp
.LP
GLD implements the \fBopen\fR(9E) and \fBclose\fR(9E) functions and the
required \fBSTREAMS\fR \fBput\fR(9E) and \fBsrv\fR(9E) functions on behalf of
the device-specific driver. GLD also implements the \fBgetinfo\fR(9E) function
for the driver.
.sp
.LP
The \fBmi_idname\fR element of the \fBmodule_info\fR(9S) structure is a string
specifying the name of the driver. This must exactly match the name of the
driver module as it exists in the file system.
.sp
.LP
The read-side \fBqinit\fR(9S) structure should specify the following elements
as shown below:
.sp
.ne 2
.mk
.na
\fB\fBqi_putp\fR \fR
.ad
.RS 14n
.rt  
\fINULL\fR
.RE

.sp
.ne 2
.mk
.na
\fB\fBqi_srvp\fR \fR
.ad
.RS 14n
.rt  
\fBgld_rsrv\fR
.RE

.sp
.ne 2
.mk
.na
\fB\fBqi_qopen\fR \fR
.ad
.RS 14n
.rt  
\fBgld_open\fR
.RE

.sp
.ne 2
.mk
.na
\fB\fBqi_qclose\fR \fR
.ad
.RS 14n
.rt  
\fBgld_close\fR
.RE

.sp
.LP
The write-side \fBqinit\fR(9S) structure should specify the following elements
as shown below:
.sp
.ne 2
.mk
.na
\fB\fBqi_putp\fR \fR
.ad
.RS 14n
.rt  
\fBgld_wput\fR
.RE

.sp
.ne 2
.mk
.na
\fB\fBqi_srvp\fR \fR
.ad
.RS 14n
.rt  
\fBgld_wsrv\fR
.RE

.sp
.ne 2
.mk
.na
\fB\fBqi_qopen\fR \fR
.ad
.RS 14n
.rt  
\fINULL\fR
.RE

.sp
.ne 2
.mk
.na
\fB\fBqi_qclose\fR \fR
.ad
.RS 14n
.rt  
\fINULL\fR
.RE

.sp
.LP
The \fBdevo_getinfo\fR element of the \fBdev_ops\fR(9S) structure should
specify \fBgld_getinfo\fR as the \fBgetinfo\fR(9E) routine.
.sp
.LP
The driver's \fBattach\fR(9E) function does all the work of associating the
hardware-specific device driver with the GLD facility and preparing the device
and driver for use.
.sp
.LP
The \fBattach\fR(9E) function allocates a \fBgld_mac_info\fR(9S) (``macinfo'')
structure using \fBgld_mac_alloc()\fR. The driver usually needs to save more
information per device than is defined in the macinfo structure; it should
allocate the additional required data structure and save a pointer to it in the
\fBgldm_private\fR member of the \fBgld_mac_info\fR(9S) structure.
.sp
.LP
The \fBattach\fR(9E) routine must initialize the macinfo structure as described
in \fBgld_mac_info\fR(9S) and then call \fBgld_register()\fR to link the driver
with the GLD module. The driver should map registers if necessary and be fully
initialized and prepared to accept interrupts before calling
\fBgld_register()\fR. The \fBattach\fR(9E) function should add interrupts but
not enable the device to generate them. The driver should reset the hardware
before calling \fBgld_register()\fR to ensure it is quiescent; the device must
not be started or put into a state where it may generate an interrupt before
\fBgld_register()\fR is called. That will be done later when GLD calls the
driver's \fBgldm_start()\fR entry point described in \fBgld\fR(9E). Once
\fBgld_register()\fR succeeds, the \fBgld\fR(9E) entry points may be called by
GLD at any time.
.sp
.LP
The \fBattach\fR(9E) routine should return \fBDDI_SUCCESS\fR if
\fBgld_register()\fR succeeds. If \fBgld_register()\fR fails, it returns
\fBDDI_FAILURE\fR and the \fBattach\fR(9E) routine should deallocate any
resources it allocated before calling \fBgld_register()\fR and then also return
\fBDDI_FAILURE\fR. Under no circumstances should a failed macinfo structure be
reused; it should be deallocated using \fBgld_mac_free\fR().
.sp
.LP
The \fBdetach\fR(9E) function should attempt to unregister the driver from GLD.
This is done by calling \fBgld_unregister()\fR described in \fBgld\fR(9F). The
\fBdetach\fR(9E) routine can get a pointer to the needed \fBgld_mac_info\fR(9S)
structure from the device's private data using
\fBddi_get_driver_private\fR(9F). \fBgld_unregister\fR() checks certain
conditions that could require that the driver not be detached. If the checks
fail, \fBgld_unregister()\fR returns \fBDDI_FAILURE\fR, in which case the
driver's \fBdetach\fR(9E) routine must leave the device operational and return
\fBDDI_FAILURE\fR. If the checks succeed, \fBgld_unregister()\fR ensures that
the device interrupts are stopped, calling the driver's \fBgldm_stop()\fR
routine if necessary, unlinks the driver from the GLD framework, and returns
\fBDDI_SUCCESS\fR. In this case, the \fBdetach\fR(9E) routine should remove
interrupts, deallocate any data structures allocated in the \fBattach\fR(9E)
routine, using \fBgld_mac_free()\fR to deallocate the macinfo structure, and
return \fBDDI_SUCCESS\fR. It is important to remove the interrupt \fIbefore\fR
calling \fBgld_mac_free()\fR.
.SS "Network Statistics"
.sp
.LP
Solaris network drivers must implement statistics variables. GLD itself tallies
some network statistics, but other statistics must be counted by each GLD-based
driver. GLD provides support for GLD-based drivers to report a standard set of
network driver statistics. Statistics are reported by GLD using the
\fBkstat\fR(7D) and \fBkstat\fR(9S) mechanism. The \fBDL_GET_STATISTICS_REQ\fR
DLPI command may also be used to retrieve the current statistics counters. All
statistics are maintained as unsigned, and all are 32 bits unless otherwise
noted.
.sp
.LP
GLD maintains and reports the following statistics.
.sp
.ne 2
.mk
.na
\fB\fBrbytes64\fR \fR
.ad
.RS 15n
.rt  
Total bytes successfully received on the interface (64 bits).
.RE

.sp
.ne 2
.mk
.na
\fB\fBrbytes\fR \fR
.ad
.RS 15n
.rt  
Total bytes successfully received on the interface.
.RE

.sp
.ne 2
.mk
.na
\fB\fBobytes64\fR \fR
.ad
.RS 15n
.rt  
Total bytes requested to be transmitted on the interface (64 bits).
.RE

.sp
.ne 2
.mk
.na
\fB\fBobytes\fR \fR
.ad
.RS 15n
.rt  
Total bytes requested to be transmitted on the interface.
.RE

.sp
.ne 2
.mk
.na
\fB\fBipackets64\fR \fR
.ad
.RS 15n
.rt  
Total packets successfully received on the interface (64 bits).
.RE

.sp
.ne 2
.mk
.na
\fB\fBipackets\fR \fR
.ad
.RS 15n
.rt  
Total packets successfully received on the interface.
.RE

.sp
.ne 2
.mk
.na
\fB\fBopackets64\fR \fR
.ad
.RS 15n
.rt  
Total packets requested to be transmitted on the interface (64 bits).
.RE

.sp
.ne 2
.mk
.na
\fB\fBopackets\fR \fR
.ad
.RS 15n
.rt  
Total packets requested to be transmitted on the interface.
.RE

.sp
.ne 2
.mk
.na
\fB\fBmultircv\fR \fR
.ad
.RS 15n
.rt  
Multicast packets successfully received, including group and functional
addresses (long).
.RE

.sp
.ne 2
.mk
.na
\fB\fBmultixmt\fR \fR
.ad
.RS 15n
.rt  
Multicast packets requested to be transmitted, including group and functional
addresses (long).
.RE

.sp
.ne 2
.mk
.na
\fB\fBbrdcstrcv\fR \fR
.ad
.RS 15n
.rt  
Broadcast packets successfully received (long).
.RE

.sp
.ne 2
.mk
.na
\fB\fBbrdcstxmt\fR \fR
.ad
.RS 15n
.rt  
Broadcast packets requested to be transmitted (long).
.RE

.sp
.ne 2
.mk
.na
\fB\fBunknowns\fR \fR
.ad
.RS 15n
.rt  
Valid received packets not accepted by any stream (long).
.RE

.sp
.ne 2
.mk
.na
\fB\fBnoxmtbuf\fR \fR
.ad
.RS 15n
.rt  
Packets discarded on output because transmit buffer was busy, or no buffer
could be allocated for transmit (long).
.RE

.sp
.ne 2
.mk
.na
\fB\fBblocked\fR \fR
.ad
.RS 15n
.rt  
Times a received packet could not be put up a stream because the queue was flow
controlled (long).
.RE

.sp
.ne 2
.mk
.na
\fB\fBxmtretry\fR \fR
.ad
.RS 15n
.rt  
Times transmit was retried after having been delayed due to lack of resources
(long).
.RE

.sp
.ne 2
.mk
.na
\fB\fBpromisc\fR \fR
.ad
.RS 15n
.rt  
Current ``promiscuous'' state of the interface (string).
.RE

.sp
.LP
The device dependent driver counts the following statistics, keeping track of
them in a private per-instance structure. When GLD is asked to report
statistics, it calls the driver's \fBgldm_get_stats()\fR entry point, as
described in \fBgld\fR(9E), to update the device-specific statistics in the
\fBgld_stats\fR(9S) structure. GLD then reports the updated statistics using
the named statistics variables below.
.sp
.ne 2
.mk
.na
\fB\fBifspeed\fR \fR
.ad
.RS 13n
.rt  
Current estimated bandwidth of the interface in bits per second (64 bits).
.RE

.sp
.ne 2
.mk
.na
\fB\fBmedia\fR \fR
.ad
.RS 13n
.rt  
Current media type in use by the device (string).
.RE

.sp
.ne 2
.mk
.na
\fB\fBintr\fR \fR
.ad
.RS 13n
.rt  
Times interrupt handler was called and claimed the interrupt (long).
.RE

.sp
.ne 2
.mk
.na
\fB\fBnorcvbuf\fR \fR
.ad
.RS 13n
.rt  
Times a valid incoming packet was known to have been discarded because no
buffer could be allocated for receive (long).
.RE

.sp
.ne 2
.mk
.na
\fB\fBierrors\fR \fR
.ad
.RS 13n
.rt  
Total packets received that couldn't be processed because they contained errors
(long).
.RE

.sp
.ne 2
.mk
.na
\fB\fBoerrors\fR \fR
.ad
.RS 13n
.rt  
Total packets that weren't successfully transmitted because of errors (long).
.RE

.sp
.ne 2
.mk
.na
\fB\fBmissed\fR \fR
.ad
.RS 13n
.rt  
Packets known to have been dropped by the hardware on receive (long).
.RE

.sp
.ne 2
.mk
.na
\fB\fBuflo\fR \fR
.ad
.RS 13n
.rt  
Times FIFO underflowed on transmit (long).
.RE

.sp
.ne 2
.mk
.na
\fB\fBoflo\fR \fR
.ad
.RS 13n
.rt  
Times receiver overflowed during receive (long).
.RE

.sp
.LP
The following group of statistics applies to networks of type \fBDL_ETHER\fR;
these are maintained by device-specific drivers of that type, as above.
.sp
.ne 2
.mk
.na
\fB\fBalign_errors\fR \fR
.ad
.RS 23n
.rt  
Packets received with framing errors (not an integral number of octets) (long).
.RE

.sp
.ne 2
.mk
.na
\fB\fBfcs_errors\fR \fR
.ad
.RS 23n
.rt  
Packets received with CRC errors (long).
.RE

.sp
.ne 2
.mk
.na
\fB\fBduplex\fR \fR
.ad
.RS 23n
.rt  
Current duplex mode of the interface (string).
.RE

.sp
.ne 2
.mk
.na
\fB\fBcarrier_errors\fR \fR
.ad
.RS 23n
.rt  
Times carrier was lost or never detected on a transmission attempt (long).
.RE

.sp
.ne 2
.mk
.na
\fB\fBcollisions\fR \fR
.ad
.RS 23n
.rt  
Ethernet collisions during transmit (long).
.RE

.sp
.ne 2
.mk
.na
\fB\fBex_collisions\fR \fR
.ad
.RS 23n
.rt  
Frames where excess collisions occurred on transmit, causing transmit failure
(long).
.RE

.sp
.ne 2
.mk
.na
\fB\fBtx_late_collisions\fR \fR
.ad
.RS 23n
.rt  
Times a transmit collision occurred late (after 512 bit times) (long).
.RE

.sp
.ne 2
.mk
.na
\fB\fBdefer_xmts\fR \fR
.ad
.RS 23n
.rt  
Packets without collisions where first transmit attempt was delayed because the
medium was busy (long).
.RE

.sp
.ne 2
.mk
.na
\fB\fBfirst_collisions\fR \fR
.ad
.RS 23n
.rt  
Packets successfully transmitted with exactly one collision.
.RE

.sp
.ne 2
.mk
.na
\fB\fBmulti_collisions\fR \fR
.ad
.RS 23n
.rt  
Packets successfully transmitted with multiple collisions.
.RE

.sp
.ne 2
.mk
.na
\fB\fBsqe_errors\fR \fR
.ad
.RS 23n
.rt  
Times SQE test error was reported.
.RE

.sp
.ne 2
.mk
.na
\fB\fBmacxmt_errors\fR \fR
.ad
.RS 23n
.rt  
Packets encountering transmit MAC failures, except carrier and collision
failures.
.RE

.sp
.ne 2
.mk
.na
\fB\fBmacrcv_errors\fR \fR
.ad
.RS 23n
.rt  
Packets received with MAC errors, except align, fcs, and toolong errors.
.RE

.sp
.ne 2
.mk
.na
\fB\fBtoolong_errors\fR \fR
.ad
.RS 23n
.rt  
Packets received larger than the maximum permitted length.
.RE

.sp
.ne 2
.mk
.na
\fB\fBrunt_errors\fR \fR
.ad
.RS 23n
.rt  
Packets received smaller than the minimum permitted length (long).
.RE

.sp
.LP
The following group of statistics applies to networks of type \fBDL_TPR\fR;
these are maintained by device-specific drivers of that type, as above.
.sp
.ne 2
.mk
.na
\fB\fBline_errors\fR \fR
.ad
.RS 24n
.rt  
Packets received with non-data bits or FCS errors.
.RE

.sp
.ne 2
.mk
.na
\fB\fBburst_errors\fR \fR
.ad
.RS 24n
.rt  
Times an absence of transitions for five half-bit timers was detected.
.RE

.sp
.ne 2
.mk
.na
\fB\fBsignal_losses\fR \fR
.ad
.RS 24n
.rt  
Times loss of signal condition on the ring was detected.
.RE

.sp
.ne 2
.mk
.na
\fB\fBace_errors\fR \fR
.ad
.RS 24n
.rt  
Times an AMP or SMP frame in which A is equal to C is equal to 0, was followed
by another such SMP frame without an intervening AMP frame.
.RE

.sp
.ne 2
.mk
.na
\fB\fBinternal_errors\fR \fR
.ad
.RS 24n
.rt  
Times the station recognized an internal error.
.RE

.sp
.ne 2
.mk
.na
\fB\fBlost_frame_errors\fR \fR
.ad
.RS 24n
.rt  
Times the TRR timer expired during transmit.
.RE

.sp
.ne 2
.mk
.na
\fB\fBframe_copied_errors\fR \fR
.ad
.RS 24n
.rt  
Times a frame addressed to this station was received with the FS field A bit
set to 1.
.RE

.sp
.ne 2
.mk
.na
\fB\fBtoken_errors\fR \fR
.ad
.RS 24n
.rt  
Times the station acting as the active monitor recognized an error condition
that needed a token transmitted.
.RE

.sp
.ne 2
.mk
.na
\fB\fBfreq_errors\fR \fR
.ad
.RS 24n
.rt  
Times the frequency of the incoming signal differed from the expected
frequency.
.RE

.sp
.LP
The following group of statistics applies to networks of type \fBDL_FDDI\fR;
these are maintained by device-specific drivers of that type, as above.
.sp
.ne 2
.mk
.na
\fB\fBmac_errors\fR \fR
.ad
.RS 20n
.rt  
Frames detected in error by this MAC that had not been detected in error by
another MAC.
.RE

.sp
.ne 2
.mk
.na
\fB\fBmac_lost_errors\fR \fR
.ad
.RS 20n
.rt  
Frames received with format errors such that the frame was stripped.
.RE

.sp
.ne 2
.mk
.na
\fB\fBmac_tokens\fR \fR
.ad
.RS 20n
.rt  
Number of tokens received (total of non-restricted and restricted).
.RE

.sp
.ne 2
.mk
.na
\fB\fBmac_tvx_expired\fR \fR
.ad
.RS 20n
.rt  
Number of times that TVX has expired.
.RE

.sp
.ne 2
.mk
.na
\fB\fBmac_late\fR \fR
.ad
.RS 20n
.rt  
Number of TRT expirations since this MAC was reset or a token was received.
.RE

.sp
.ne 2
.mk
.na
\fB\fBmac_ring_ops\fR \fR
.ad
.RS 20n
.rt  
Number of times the ring has entered the ``Ring_Operational'' state from the
``Ring Not Operational'' state.
.RE

.SH FILES
.sp
.ne 2
.mk
.na
\fB\fB/kernel/misc/gld\fR \fR
.ad
.RS 21n
.rt  
loadable kernel module
.RE

.SH SEE ALSO
.sp
.LP
\fBld\fR(1), \fBkstat\fR(7D), \fBdlpi\fR(7P), \fBattach\fR(9E), \fBgld\fR(9E),
\fBopen\fR(9E), \fBgld\fR(9F), \fBgld_mac_info\fR(9S), \fBgld_stats\fR(9S),
\fBkstat\fR(9S)
.sp
.LP
\fIWriting Device Drivers\fR
.SH WARNINGS
.sp
.LP
Contrary to the DLPI specification, GLD returns the device's correct address
length and broadcast address in \fBDL_INFO_ACK\fR even before the stream has
been attached to a \fBPPA\fR.
.sp
.LP
Promiscuous mode may only be entered by streams that are attached to a
\fBPPA\fR.
.sp
.LP
The physical address of a \fBPPA\fR may be changed by the superuser while other
streams are bound to the same PPA.