/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2009 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ /* * Copyright (c) 1988 AT&T * All Rights Reserved */ /* * Object file dependent support for ELF objects. */ #include #include #include #include #include #include #include #include #include #include "_rtld.h" #include "_audit.h" #include "_elf.h" #include "_inline.h" #include "msg.h" /* * Default and secure dependency search paths. */ static Spath_defn _elf_def_dirs[] = { #if defined(_ELF64) { MSG_ORIG(MSG_PTH_LIB_64), MSG_PTH_LIB_64_SIZE }, { MSG_ORIG(MSG_PTH_USRLIB_64), MSG_PTH_USRLIB_64_SIZE }, #else { MSG_ORIG(MSG_PTH_LIB), MSG_PTH_LIB_SIZE }, { MSG_ORIG(MSG_PTH_USRLIB), MSG_PTH_USRLIB_SIZE }, #endif { 0, 0 } }; static Spath_defn _elf_sec_dirs[] = { #if defined(_ELF64) { MSG_ORIG(MSG_PTH_LIBSE_64), MSG_PTH_LIBSE_64_SIZE }, { MSG_ORIG(MSG_PTH_USRLIBSE_64), MSG_PTH_USRLIBSE_64_SIZE }, #else { MSG_ORIG(MSG_PTH_LIBSE), MSG_PTH_LIBSE_SIZE }, { MSG_ORIG(MSG_PTH_USRLIBSE), MSG_PTH_USRLIBSE_SIZE }, #endif { 0, 0 } }; Alist *elf_def_dirs = NULL; Alist *elf_sec_dirs = NULL; /* * Defines for local functions. */ static void elf_dladdr(ulong_t, Rt_map *, Dl_info *, void **, int); static Addr elf_entry_point(void); static int elf_fix_name(const char *, Rt_map *, Alist **, Aliste, uint_t); static Alist **elf_get_def_dirs(void); static Alist **elf_get_sec_dirs(void); static char *elf_get_so(const char *, const char *, size_t, size_t); static int elf_needed(Lm_list *, Aliste, Rt_map *, int *); /* * Functions and data accessed through indirect pointers. */ Fct elf_fct = { elf_verify, elf_new_lmp, elf_entry_point, elf_needed, lookup_sym, elf_reloc, elf_get_def_dirs, elf_get_sec_dirs, elf_fix_name, elf_get_so, elf_dladdr, dlsym_handle }; /* * Default and secure dependency search paths. */ static Alist ** elf_get_def_dirs() { if (elf_def_dirs == NULL) set_dirs(&elf_def_dirs, _elf_def_dirs, LA_SER_DEFAULT); return (&elf_def_dirs); } static Alist ** elf_get_sec_dirs() { if (elf_sec_dirs == NULL) set_dirs(&elf_sec_dirs, _elf_sec_dirs, LA_SER_SECURE); return (&elf_sec_dirs); } /* * Redefine NEEDED name if necessary. */ static int elf_fix_name(const char *name, Rt_map *clmp, Alist **alpp, Aliste alni, uint_t orig) { /* * For ABI compliance, if we are asked for ld.so.1, then really give * them libsys.so.1 (the SONAME of libsys.so.1 is ld.so.1). */ if (((*name == '/') && /* BEGIN CSTYLED */ #if defined(_ELF64) (strcmp(name, MSG_ORIG(MSG_PTH_RTLD_64)) == 0)) || #else (strcmp(name, MSG_ORIG(MSG_PTH_RTLD)) == 0)) || #endif (strcmp(name, MSG_ORIG(MSG_FIL_RTLD)) == 0)) { /* END CSTYLED */ Pdesc *pdp; DBG_CALL(Dbg_file_fixname(LIST(clmp), name, MSG_ORIG(MSG_PTH_LIBSYS))); if ((pdp = alist_append(alpp, NULL, sizeof (Pdesc), alni)) == NULL) return (0); pdp->pd_pname = (char *)MSG_ORIG(MSG_PTH_LIBSYS); pdp->pd_plen = MSG_PTH_LIBSYS_SIZE; pdp->pd_flags = PD_FLG_PNSLASH; return (1); } return (expand_paths(clmp, name, alpp, alni, orig, 0)); } /* * Determine whether this object requires any hardware or software capabilities. */ static int elf_cap_check(Fdesc *fdp, Ehdr *ehdr, Rej_desc *rej) { Phdr *phdr; int cnt; /* LINTED */ phdr = (Phdr *)((char *)ehdr + ehdr->e_phoff); for (cnt = 0; cnt < ehdr->e_phnum; cnt++, phdr++) { Cap *cptr; if (phdr->p_type != PT_SUNWCAP) continue; /* LINTED */ cptr = (Cap *)((char *)ehdr + phdr->p_offset); while (cptr->c_tag != CA_SUNW_NULL) { if (cptr->c_tag == CA_SUNW_HW_1) { /* * Verify the hardware capabilities. */ if (hwcap_check(cptr->c_un.c_val, rej) == 0) return (0); /* * Retain this hardware capabilities value for * possible later inspection should this object * be processed as a filtee. */ fdp->fd_hwcap = cptr->c_un.c_val; } if (cptr->c_tag == CA_SUNW_SF_1) { /* * Verify the software capabilities. */ if (sfcap_check(cptr->c_un.c_val, rej) == 0) return (0); } cptr++; } } return (1); } /* * Determine if we have been given an ELF file and if so determine if the file * is compatible. Returns 1 if true, else 0 and sets the reject descriptor * with associated error information. */ Fct * elf_verify(caddr_t addr, size_t size, Fdesc *fdp, const char *name, Rej_desc *rej) { Ehdr *ehdr; char *caddr = (char *)addr; /* * Determine if we're an elf file. If not simply return, we don't set * any rejection information as this test allows use to scroll through * the objects we support (ELF, AOUT). */ if (size < sizeof (Ehdr) || caddr[EI_MAG0] != ELFMAG0 || caddr[EI_MAG1] != ELFMAG1 || caddr[EI_MAG2] != ELFMAG2 || caddr[EI_MAG3] != ELFMAG3) { return (NULL); } /* * Check class and encoding. */ /* LINTED */ ehdr = (Ehdr *)addr; if (ehdr->e_ident[EI_CLASS] != M_CLASS) { rej->rej_type = SGS_REJ_CLASS; rej->rej_info = (uint_t)ehdr->e_ident[EI_CLASS]; return (NULL); } if (ehdr->e_ident[EI_DATA] != M_DATA) { rej->rej_type = SGS_REJ_DATA; rej->rej_info = (uint_t)ehdr->e_ident[EI_DATA]; return (NULL); } if ((ehdr->e_type != ET_REL) && (ehdr->e_type != ET_EXEC) && (ehdr->e_type != ET_DYN)) { rej->rej_type = SGS_REJ_TYPE; rej->rej_info = (uint_t)ehdr->e_type; return (NULL); } /* * Verify ELF version. */ if (ehdr->e_version > EV_CURRENT) { rej->rej_type = SGS_REJ_VERSION; rej->rej_info = (uint_t)ehdr->e_version; return (NULL); } /* * Verify machine specific flags. */ if (elf_mach_flags_check(rej, ehdr) == 0) return (NULL); /* * Verify any hardware/software capability requirements. Note, if this * object is an explicitly defined shared object under inspection by * ldd(1), and contains an incompatible hardware capabilities * requirement, then inform the user, but continue processing. */ if (elf_cap_check(fdp, ehdr, rej) == 0) { Rt_map *lmp = lml_main.lm_head; if ((lml_main.lm_flags & LML_FLG_TRC_LDDSTUB) && lmp && (FLAGS1(lmp) & FL1_RT_LDDSTUB) && (NEXT(lmp) == NULL)) { const char *fmt; if (rej->rej_type == SGS_REJ_HWCAP_1) fmt = MSG_INTL(MSG_LDD_GEN_HWCAP_1); else fmt = MSG_INTL(MSG_LDD_GEN_SFCAP_1); (void) printf(fmt, name, rej->rej_str); return (&elf_fct); } return (NULL); } return (&elf_fct); } /* * The runtime linker employs lazy loading to provide the libraries needed for * debugging, preloading .o's and dldump(). As these are seldom used, the * standard startup of ld.so.1 doesn't initialize all the information necessary * to perform plt relocation on ld.so.1's link-map. The first time lazy loading * is called we get here to perform these initializations: * * o elf_needed() is called to set up the DYNINFO() indexes for each lazy * dependency. Typically, for all other objects, this is called during * analyze_so(), but as ld.so.1 is set-contained we skip this processing. * * o For intel, ld.so.1's JMPSLOT relocations need relative updates. These * are by default skipped thus delaying all relative relocation processing * on every invocation of ld.so.1. */ int elf_rtld_load() { Lm_list *lml = &lml_rtld; Rt_map *lmp = lml->lm_head; if (lml->lm_flags & LML_FLG_PLTREL) return (1); /* * As we need to refer to the DYNINFO() information, insure that it has * been initialized. */ if (elf_needed(lml, ALIST_OFF_DATA, lmp, NULL) == 0) return (0); #if defined(__i386) /* * This is a kludge to give ld.so.1 a performance benefit on i386. * It's based around two factors. * * o JMPSLOT relocations (PLT's) actually need a relative relocation * applied to the GOT entry so that they can find PLT0. * * o ld.so.1 does not exercise *any* PLT's before it has made a call * to elf_lazy_load(). This is because all dynamic dependencies * are recorded as lazy dependencies. */ (void) elf_reloc_relative_count((ulong_t)JMPREL(lmp), (ulong_t)(PLTRELSZ(lmp) / RELENT(lmp)), (ulong_t)RELENT(lmp), (ulong_t)ADDR(lmp), lmp, NULL); #endif lml->lm_flags |= LML_FLG_PLTREL; return (1); } /* * Lazy load an object. */ Rt_map * elf_lazy_load(Rt_map *clmp, Slookup *slp, uint_t ndx, const char *sym, int *in_nfavl) { Alist *palp = NULL; Rt_map *nlmp; Dyninfo *dip = &DYNINFO(clmp)[ndx], *pdip; uint_t flags = 0; const char *name; Lm_list *lml = LIST(clmp); Aliste lmco; /* * If this dependency has already been processed, we're done. */ if (((nlmp = (Rt_map *)dip->di_info) != NULL) || (dip->di_flags & FLG_DI_LDD_DONE)) return (nlmp); /* * If we're running under ldd(1), indicate that this dependency has been * processed (see test above). It doesn't matter whether the object is * successfully loaded or not, this flag simply ensures that we don't * repeatedly attempt to load an object that has already failed to load. * To do so would create multiple failure diagnostics for the same * object under ldd(1). */ if (lml->lm_flags & LML_FLG_TRC_ENABLE) dip->di_flags |= FLG_DI_LDD_DONE; /* * Determine the initial dependency name. */ name = STRTAB(clmp) + DYN(clmp)[ndx].d_un.d_val; DBG_CALL(Dbg_file_lazyload(clmp, name, sym)); /* * If this object needs to establish its own group, make sure a handle * is created. */ if (dip->di_flags & FLG_DI_GROUP) flags |= (FLG_RT_SETGROUP | FLG_RT_HANDLE); /* * Lazy dependencies are identified as DT_NEEDED entries with a * DF_P1_LAZYLOAD flag in the previous DT_POSFLAG_1 element. The * dynamic information element that corresponds to the DT_POSFLAG_1 * entry is free, and thus used to store the present entrance * identifier. This identifier is used to prevent multiple attempts to * load a failed lazy loadable dependency within the same runtime linker * operation. However, future attempts to reload this dependency are * still possible. */ if (ndx && (pdip = dip - 1) && (pdip->di_flags & FLG_DI_POSFLAG1)) pdip->di_info = (void *)slp->sl_id; /* * Expand the requested name if necessary. */ if (elf_fix_name(name, clmp, &palp, AL_CNT_NEEDED, 0) == 0) return (NULL); /* * Establish a link-map control list for this request. */ if ((lmco = create_cntl(lml, 0)) == NULL) { remove_plist(&palp, 1); return (NULL); } /* * Load the associated object. */ dip->di_info = nlmp = load_one(lml, lmco, palp, clmp, MODE(clmp), flags, 0, in_nfavl); /* * Remove any expanded pathname infrastructure. Reduce the pending lazy * dependency count of the caller, together with the link-map lists * count of objects that still have lazy dependencies pending. */ remove_plist(&palp, 1); if (--LAZY(clmp) == 0) LIST(clmp)->lm_lazy--; /* * Finish processing the objects associated with this request, and * create an association between the caller and this dependency. */ if (nlmp && ((bind_one(clmp, nlmp, BND_NEEDED) == 0) || ((nlmp = analyze_lmc(lml, lmco, nlmp, in_nfavl)) == NULL) || (relocate_lmc(lml, lmco, clmp, nlmp, in_nfavl) == 0))) dip->di_info = nlmp = NULL; /* * If this lazyload has failed, and we've created a new link-map * control list to which this request has added objects, then remove * all the objects that have been associated to this request. */ if ((nlmp == NULL) && (lmco != ALIST_OFF_DATA)) remove_lmc(lml, clmp, lmco, name); /* * Remove any temporary link-map control list. */ if (lmco != ALIST_OFF_DATA) remove_cntl(lml, lmco); /* * If this lazy loading failed, record the fact, and bump the lazy * counts. */ if (nlmp == NULL) { dip->di_flags |= FLG_DI_LAZYFAIL; if (LAZY(clmp)++ == 0) LIST(clmp)->lm_lazy++; } return (nlmp); } /* * Return the entry point of the ELF executable. */ static Addr elf_entry_point(void) { Rt_map *lmp = lml_main.lm_head; Ehdr *ehdr = (Ehdr *)ADDR(lmp); Addr addr = (Addr)(ehdr->e_entry); if ((FLAGS(lmp) & FLG_RT_FIXED) == 0) addr += ADDR(lmp); return (addr); } /* * Determine if a dependency requires a particular version and if so verify * that the version exists in the dependency. */ int elf_verify_vers(const char *name, Rt_map *clmp, Rt_map *nlmp) { Verneed *vnd = VERNEED(clmp); int _num, num = VERNEEDNUM(clmp); char *cstrs = (char *)STRTAB(clmp); Lm_list *lml = LIST(clmp); /* * Traverse the callers version needed information and determine if any * specific versions are required from the dependency. */ DBG_CALL(Dbg_ver_need_title(LIST(clmp), NAME(clmp))); for (_num = 1; _num <= num; _num++, vnd = (Verneed *)((Xword)vnd + vnd->vn_next)) { Half cnt = vnd->vn_cnt; Vernaux *vnap; char *nstrs, *need; /* * Determine if a needed entry matches this dependency. */ need = (char *)(cstrs + vnd->vn_file); if (strcmp(name, need) != 0) continue; if ((lml->lm_flags & LML_FLG_TRC_VERBOSE) && ((FLAGS1(clmp) & FL1_RT_LDDSTUB) == 0)) (void) printf(MSG_INTL(MSG_LDD_VER_FIND), name); /* * Validate that each version required actually exists in the * dependency. */ nstrs = (char *)STRTAB(nlmp); for (vnap = (Vernaux *)((Xword)vnd + vnd->vn_aux); cnt; cnt--, vnap = (Vernaux *)((Xword)vnap + vnap->vna_next)) { char *version, *define; Verdef *vdf = VERDEF(nlmp); ulong_t _num, num = VERDEFNUM(nlmp); int found = 0; /* * Skip validation of versions that are marked * INFO. This optimization is used for versions * that are inherited by another version. Verification * of the inheriting version is sufficient. * * Such versions are recorded in the object for the * benefit of VERSYM entries that refer to them. This * provides a purely diagnositic benefit. */ if (vnap->vna_flags & VER_FLG_INFO) continue; version = (char *)(cstrs + vnap->vna_name); DBG_CALL(Dbg_ver_need_entry(lml, 0, need, version)); for (_num = 1; _num <= num; _num++, vdf = (Verdef *)((Xword)vdf + vdf->vd_next)) { Verdaux *vdap; if (vnap->vna_hash != vdf->vd_hash) continue; vdap = (Verdaux *)((Xword)vdf + vdf->vd_aux); define = (char *)(nstrs + vdap->vda_name); if (strcmp(version, define) != 0) continue; found++; break; } /* * If we're being traced print out any matched version * when the verbose (-v) option is in effect. Always * print any unmatched versions. */ if (lml->lm_flags & LML_FLG_TRC_ENABLE) { /* BEGIN CSTYLED */ if (found) { if (!(lml->lm_flags & LML_FLG_TRC_VERBOSE)) continue; (void) printf(MSG_ORIG(MSG_LDD_VER_FOUND), need, version, NAME(nlmp)); } else { if (rtld_flags & RT_FL_SILENCERR) continue; (void) printf(MSG_INTL(MSG_LDD_VER_NFOUND), need, version); } /* END CSTYLED */ continue; } /* * If the version hasn't been found then this is a * candidate for a fatal error condition. Weak * version definition requirements are silently * ignored. Also, if the image inspected for a version * definition has no versioning recorded at all then * silently ignore this (this provides better backward * compatibility to old images created prior to * versioning being available). Both of these skipped * diagnostics are available under tracing (see above). */ if ((found == 0) && (num != 0) && (!(vnap->vna_flags & VER_FLG_WEAK))) { eprintf(lml, ERR_FATAL, MSG_INTL(MSG_VER_NFOUND), need, version, NAME(clmp)); return (0); } } } DBG_CALL(Dbg_util_nl(lml, DBG_NL_STD)); return (1); } /* * Search through the dynamic section for DT_NEEDED entries and perform one * of two functions. If only the first argument is specified then load the * defined shared object, otherwise add the link map representing the defined * link map the the dlopen list. */ static int elf_needed(Lm_list *lml, Aliste lmco, Rt_map *clmp, int *in_nfavl) { Alist *palp = NULL; Dyn *dyn, *pdyn; ulong_t ndx = 0; uint_t lazy, flags; Word lmflags = lml->lm_flags; Word lmtflags = lml->lm_tflags; /* * Process each shared object on needed list. */ if (DYN(clmp) == NULL) return (1); for (dyn = (Dyn *)DYN(clmp), pdyn = NULL; dyn->d_tag != DT_NULL; pdyn = dyn++, ndx++) { Dyninfo *dip = &DYNINFO(clmp)[ndx]; Rt_map *nlmp = NULL; char *name; int silent = 0; switch (dyn->d_tag) { case DT_POSFLAG_1: dip->di_flags |= FLG_DI_POSFLAG1; continue; case DT_NEEDED: case DT_USED: lazy = flags = 0; dip->di_flags |= FLG_DI_NEEDED; if (pdyn && (pdyn->d_tag == DT_POSFLAG_1)) { if ((pdyn->d_un.d_val & DF_P1_LAZYLOAD) && ((lmtflags & LML_TFLG_NOLAZYLD) == 0)) { dip->di_flags |= FLG_DI_LAZY; lazy = 1; } if (pdyn->d_un.d_val & DF_P1_GROUPPERM) { dip->di_flags |= FLG_DI_GROUP; flags = (FLG_RT_SETGROUP | FLG_RT_HANDLE); } } name = (char *)STRTAB(clmp) + dyn->d_un.d_val; /* * NOTE, libc.so.1 can't be lazy loaded. Although a * lazy position flag won't be produced when a RTLDINFO * .dynamic entry is found (introduced with the UPM in * Solaris 10), it was possible to mark libc for lazy * loading on previous releases. To reduce the overhead * of testing for this occurrence, only carry out this * check for the first object on the link-map list * (there aren't many applications built without libc). */ if (lazy && (lml->lm_head == clmp) && (strcmp(name, MSG_ORIG(MSG_FIL_LIBC)) == 0)) lazy = 0; /* * Don't bring in lazy loaded objects yet unless we've * been asked to attempt to load all available objects * (crle(1) sets LD_FLAGS=loadavail). Even under * RTLD_NOW we don't process this - RTLD_NOW will cause * relocation processing which in turn might trigger * lazy loading, but its possible that the object has a * lazy loaded file with no bindings (i.e., it should * never have been a dependency in the first place). */ if (lazy) { if ((lmflags & LML_FLG_LOADAVAIL) == 0) { LAZY(clmp)++; lazy = flags = 0; continue; } /* * Silence any error messages - see description * under elf_lookup_filtee(). */ if ((rtld_flags & RT_FL_SILENCERR) == 0) { rtld_flags |= RT_FL_SILENCERR; silent = 1; } } break; case DT_AUXILIARY: dip->di_flags |= FLG_DI_AUXFLTR; continue; case DT_SUNW_AUXILIARY: dip->di_flags |= (FLG_DI_AUXFLTR | FLG_DI_SYMFLTR); continue; case DT_FILTER: dip->di_flags |= FLG_DI_STDFLTR; continue; case DT_SUNW_FILTER: dip->di_flags |= (FLG_DI_STDFLTR | FLG_DI_SYMFLTR); continue; default: continue; } DBG_CALL(Dbg_file_needed(clmp, name)); /* * If we're running under ldd(1), indicate that this dependency * has been processed. It doesn't matter whether the object is * successfully loaded or not, this flag simply ensures that we * don't repeatedly attempt to load an object that has already * failed to load. To do so would create multiple failure * diagnostics for the same object under ldd(1). */ if (lml->lm_flags & LML_FLG_TRC_ENABLE) dip->di_flags |= FLG_DI_LDD_DONE; /* * Establish the objects name, load it and establish a binding * with the caller. */ if ((elf_fix_name(name, clmp, &palp, AL_CNT_NEEDED, 0) == 0) || ((nlmp = load_one(lml, lmco, palp, clmp, MODE(clmp), flags, 0, in_nfavl)) == NULL) || (bind_one(clmp, nlmp, BND_NEEDED) == 0)) nlmp = NULL; /* * Clean up any infrastructure, including the removal of the * error suppression state, if it had been previously set in * this routine. */ remove_plist(&palp, 0); if (silent) rtld_flags &= ~RT_FL_SILENCERR; if ((dip->di_info = (void *)nlmp) == NULL) { /* * If the object could not be mapped, continue if error * suppression is established or we're here with ldd(1). */ if ((MODE(clmp) & RTLD_CONFGEN) || (lmflags & (LML_FLG_LOADAVAIL | LML_FLG_TRC_ENABLE))) continue; else { remove_plist(&palp, 1); return (0); } } } if (LAZY(clmp)) lml->lm_lazy++; remove_plist(&palp, 1); return (1); } /* * A null symbol interpretor. Used if a filter has no associated filtees. */ /* ARGSUSED0 */ static Sym * elf_null_find_sym(Slookup *slp, Rt_map **dlmp, uint_t *binfo, int *in_nfavl) { return (NULL); } /* * Disable filtee use. */ static void elf_disable_filtee(Rt_map *lmp, Dyninfo *dip) { if ((dip->di_flags & FLG_DI_SYMFLTR) == 0) { /* * If this is an object filter, null out the reference name. */ if (OBJFLTRNDX(lmp) != FLTR_DISABLED) { REFNAME(lmp) = NULL; OBJFLTRNDX(lmp) = FLTR_DISABLED; /* * Indicate that this filtee is no longer available. */ if (dip->di_flags & FLG_DI_STDFLTR) SYMINTP(lmp) = elf_null_find_sym; } } else if (dip->di_flags & FLG_DI_STDFLTR) { /* * Indicate that this standard filtee is no longer available. */ if (SYMSFLTRCNT(lmp)) SYMSFLTRCNT(lmp)--; } else { /* * Indicate that this auxiliary filtee is no longer available. */ if (SYMAFLTRCNT(lmp)) SYMAFLTRCNT(lmp)--; } dip->di_flags &= ~MSK_DI_FILTER; } /* * Find symbol interpreter - filters. * This function is called when the symbols from a shared object should * be resolved from the shared objects filtees instead of from within itself. * * A symbol name of 0 is used to trigger filtee loading. */ static Sym * _elf_lookup_filtee(Slookup *slp, Rt_map **dlmp, uint_t *binfo, uint_t ndx, int *in_nfavl) { const char *name = slp->sl_name, *filtees; Rt_map *clmp = slp->sl_cmap; Rt_map *ilmp = slp->sl_imap; Pdesc *pdp; int any; Dyninfo *dip = &DYNINFO(ilmp)[ndx]; Lm_list *lml = LIST(ilmp); Aliste idx; /* * Indicate that the filter has been used. If a binding already exists * to the caller, indicate that this object is referenced. This insures * we don't generate false unreferenced diagnostics from ldd -u/U or * debugging. Don't create a binding regardless, as this filter may * have been dlopen()'ed. */ if (name && (ilmp != clmp)) { Word tracing = (LIST(clmp)->lm_flags & (LML_FLG_TRC_UNREF | LML_FLG_TRC_UNUSED)); if (tracing || DBG_ENABLED) { Bnd_desc *bdp; Aliste idx; FLAGS1(ilmp) |= FL1_RT_USED; if ((tracing & LML_FLG_TRC_UNREF) || DBG_ENABLED) { for (APLIST_TRAVERSE(CALLERS(ilmp), idx, bdp)) { if (bdp->b_caller == clmp) { bdp->b_flags |= BND_REFER; break; } } } } } /* * If this is the first call to process this filter, establish the * filtee list. If a configuration file exists, determine if any * filtee associations for this filter, and its filtee reference, are * defined. Otherwise, process the filtee reference. Any token * expansion is also completed at this point (i.e., $PLATFORM). */ filtees = (char *)STRTAB(ilmp) + DYN(ilmp)[ndx].d_un.d_val; if (dip->di_info == NULL) { if (rtld_flags2 & RT_FL2_FLTCFG) elf_config_flt(lml, PATHNAME(ilmp), filtees, (Alist **)&dip->di_info, AL_CNT_FILTEES); if (dip->di_info == NULL) { DBG_CALL(Dbg_file_filter(lml, NAME(ilmp), filtees, 0)); if ((lml->lm_flags & (LML_FLG_TRC_VERBOSE | LML_FLG_TRC_SEARCH)) && ((FLAGS1(ilmp) & FL1_RT_LDDSTUB) == 0)) (void) printf(MSG_INTL(MSG_LDD_FIL_FILTER), NAME(ilmp), filtees); if (expand_paths(ilmp, filtees, (Alist **)&dip->di_info, AL_CNT_FILTEES, 0, 0) == 0) { elf_disable_filtee(ilmp, dip); return (NULL); } } } /* * Traverse the filtee list, dlopen()'ing any objects specified and * using their group handle to lookup the symbol. */ any = 0; for (ALIST_TRAVERSE((Alist *)dip->di_info, idx, pdp)) { int mode; Grp_hdl *ghp; Rt_map *nlmp = NULL; if (pdp->pd_plen == 0) continue; /* * Establish the mode of the filtee from the filter. As filtees * are loaded via a dlopen(), make sure that RTLD_GROUP is set * and the filtees aren't global. It would be nice to have * RTLD_FIRST used here also, but as filters got out long before * RTLD_FIRST was introduced it's a little too late now. */ mode = MODE(ilmp) | RTLD_GROUP; mode &= ~RTLD_GLOBAL; /* * Insure that any auxiliary filter can locate symbols from its * caller. */ if (dip->di_flags & FLG_DI_AUXFLTR) mode |= RTLD_PARENT; /* * Process any hardware capability directory. Establish a new * link-map control list from which to analyze any newly added * objects. */ if ((pdp->pd_info == NULL) && (pdp->pd_flags & PD_TKN_HWCAP)) { const char *dir = pdp->pd_pname; Aliste lmco; /* * Establish a link-map control list for this request. */ if ((lmco = create_cntl(lml, 0)) == NULL) return (NULL); /* * Determine the hardware capability filtees. If none * can be found, provide suitable diagnostics. */ DBG_CALL(Dbg_cap_hw_filter(lml, dir, ilmp)); if (hwcap_filtees((Alist **)&dip->di_info, idx, dir, lmco, ilmp, filtees, mode, (FLG_RT_HANDLE | FLG_RT_HWCAP), in_nfavl) == 0) { if ((lml->lm_flags & LML_FLG_TRC_ENABLE) && (dip->di_flags & FLG_DI_AUXFLTR) && (rtld_flags & RT_FL_WARNFLTR)) { (void) printf( MSG_INTL(MSG_LDD_HWCAP_NFOUND), dir); } DBG_CALL(Dbg_cap_hw_filter(lml, dir, 0)); } /* * Re-establish the originating path name descriptor, as * the expansion of hardware capabilities filtees may * have re-allocated the controlling Alist. Mark this * original pathname descriptor as unused so that the * descriptor isn't revisited for processing. Any real * hardware capabilities filtees have been added as new * pathname descriptors following this descriptor. */ pdp = alist_item((Alist *)dip->di_info, idx); pdp->pd_flags &= ~PD_TKN_HWCAP; pdp->pd_plen = 0; /* * Now that any hardware capability objects have been * processed, remove any temporary link-map control * list. */ if (lmco != ALIST_OFF_DATA) remove_cntl(lml, lmco); } if (pdp->pd_plen == 0) continue; /* * Process an individual filtee. */ if (pdp->pd_info == NULL) { const char *filtee = pdp->pd_pname; int audit = 0; DBG_CALL(Dbg_file_filtee(lml, NAME(ilmp), filtee, 0)); ghp = NULL; /* * Determine if the reference link map is already * loaded. As an optimization compare the filtee with * our interpretor. The most common filter is * libdl.so.1, which is a filter on ld.so.1. */ #if defined(_ELF64) if (strcmp(filtee, MSG_ORIG(MSG_PTH_RTLD_64)) == 0) { #else if (strcmp(filtee, MSG_ORIG(MSG_PTH_RTLD)) == 0) { #endif /* * Create an association between ld.so.1 and the * filter. As an optimization, a handle for * ld.so.1 itself (required for the dlopen() * family filtering mechanism) shouldn't search * any dependencies of ld.so.1. Omitting * GPD_ADDEPS prevents the addition of any * ld.so.1 dependencies to this handle. */ nlmp = lml_rtld.lm_head; if ((ghp = hdl_create(&lml_rtld, nlmp, ilmp, (GPH_LDSO | GPH_FIRST | GPH_FILTEE), (GPD_DLSYM | GPD_RELOC), GPD_PARENT)) == NULL) nlmp = NULL; /* * Establish the filter handle to prevent any * recursion. */ if (nlmp && ghp) pdp->pd_info = (void *)ghp; /* * Audit the filter/filtee established. Ignore * any return from the auditor, as we can't * allow ignore filtering to ld.so.1, otherwise * nothing is going to work. */ if (nlmp && ((lml->lm_tflags | AFLAGS(ilmp)) & LML_TFLG_AUD_OBJFILTER)) (void) audit_objfilter(ilmp, filtees, nlmp, 0); } else { Rej_desc rej = { 0 }; Fdesc fd = { 0 }; Aliste lmco; /* * Trace the inspection of this file, determine * any auditor substitution, and seed the file * descriptor with the originating name. */ if (load_trace(lml, pdp, clmp, &fd) == NULL) continue; /* * Establish a link-map control list for this * request. */ if ((lmco = create_cntl(lml, 0)) == NULL) return (NULL); /* * Locate and load the filtee. */ if ((nlmp = load_path(lml, lmco, ilmp, mode, FLG_RT_HANDLE, &ghp, &fd, &rej, in_nfavl)) == NULL) file_notfound(LIST(ilmp), filtee, ilmp, FLG_RT_HANDLE, &rej); filtee = pdp->pd_pname; /* * Establish the filter handle to prevent any * recursion. */ if (nlmp && ghp) { ghp->gh_flags |= GPH_FILTEE; pdp->pd_info = (void *)ghp; FLAGS1(nlmp) |= FL1_RT_USED; } /* * Audit the filter/filtee established. A * return of 0 indicates the auditor wishes to * ignore this filtee. */ if (nlmp && ((lml->lm_tflags | FLAGS1(ilmp)) & LML_TFLG_AUD_OBJFILTER)) { if (audit_objfilter(ilmp, filtees, nlmp, 0) == 0) { audit = 1; nlmp = NULL; } } /* * Finish processing the objects associated with * this request. Create an association between * this object and the originating filter to * provide sufficient information to tear down * this filtee if necessary. */ if (nlmp && ghp && (((nlmp = analyze_lmc(lml, lmco, nlmp, in_nfavl)) == NULL) || (relocate_lmc(lml, lmco, ilmp, nlmp, in_nfavl) == 0))) nlmp = NULL; /* * If the filtee has been successfully * processed, then create an association * between the filter and filtee. This * association provides sufficient information * to tear down the filter and filtee if * necessary. */ DBG_CALL(Dbg_file_hdl_title(DBG_HDL_ADD)); if (nlmp && ghp && (hdl_add(ghp, ilmp, GPD_FILTER) == 0)) nlmp = NULL; /* * Generate a diagnostic if the filtee couldn't * be loaded. */ if (nlmp == NULL) DBG_CALL(Dbg_file_filtee(lml, 0, filtee, audit)); /* * If this filtee loading has failed, and we've * created a new link-map control list to which * this request has added objects, then remove * all the objects that have been associated to * this request. */ if ((nlmp == NULL) && (lmco != ALIST_OFF_DATA)) remove_lmc(lml, clmp, lmco, name); /* * Remove any temporary link-map control list. */ if (lmco != ALIST_OFF_DATA) remove_cntl(lml, lmco); } /* * If the filtee couldn't be loaded, null out the * path name descriptor entry, and continue the search. * Otherwise, the group handle is retained for future * symbol searches. */ if (nlmp == NULL) { pdp->pd_info = NULL; pdp->pd_plen = 0; continue; } } ghp = (Grp_hdl *)pdp->pd_info; /* * If we're just here to trigger filtee loading skip the symbol * lookup so we'll continue looking for additional filtees. */ if (name) { Grp_desc *gdp; Sym *sym = NULL; Aliste idx; Slookup sl = *slp; sl.sl_flags |= LKUP_FIRST; any++; /* * Look for the symbol in the handles dependencies. */ for (ALIST_TRAVERSE(ghp->gh_depends, idx, gdp)) { if ((gdp->gd_flags & GPD_DLSYM) == 0) continue; /* * If our parent is a dependency don't look at * it (otherwise we are in a recursive loop). * This situation can occur with auxiliary * filters if the filtee has a dependency on the * filter. This dependency isn't necessary as * auxiliary filters are opened RTLD_PARENT, but * users may still unknowingly add an explicit * dependency to the parent. */ if ((sl.sl_imap = gdp->gd_depend) == ilmp) continue; if (((sym = SYMINTP(sl.sl_imap)(&sl, dlmp, binfo, in_nfavl)) != NULL) || (ghp->gh_flags & GPH_FIRST)) break; } /* * If a symbol has been found, indicate the binding * and return the symbol. */ if (sym) { *binfo |= DBG_BINFO_FILTEE; return (sym); } } /* * If this object is tagged to terminate filtee processing we're * done. */ if (FLAGS1(ghp->gh_ownlmp) & FL1_RT_ENDFILTE) break; } /* * If we're just here to trigger filtee loading then we're done. */ if (name == NULL) return (NULL); /* * If no filtees have been found for a filter, clean up any path name * descriptors and disable their search completely. For auxiliary * filters we can reselect the symbol search function so that we never * enter this routine again for this object. For standard filters we * use the null symbol routine. */ if (any == 0) { remove_plist((Alist **)&(dip->di_info), 1); elf_disable_filtee(ilmp, dip); return (NULL); } return (NULL); } /* * Focal point for disabling error messages for auxiliary filters. As an * auxiliary filter allows for filtee use, but provides a fallback should a * filtee not exist (or fail to load), any errors generated as a consequence of * trying to load the filtees are typically suppressed. Setting RT_FL_SILENCERR * suppresses errors generated by eprint(), but insures a debug diagnostic is * produced. ldd(1) employs printf(), and here, the selection of whether to * print a diagnostic in regards to auxiliary filters is a little more complex. * * . The determination of whether to produce an ldd message, or a fatal * error message is driven by LML_FLG_TRC_ENABLE. * . More detailed ldd messages may also be driven off of LML_FLG_TRC_WARN, * (ldd -d/-r), LML_FLG_TRC_VERBOSE (ldd -v), LML_FLG_TRC_SEARCH (ldd -s), * and LML_FLG_TRC_UNREF/LML_FLG_TRC_UNUSED (ldd -U/-u). * * . If the calling object is lddstub, then several classes of message are * suppressed. The user isn't trying to diagnose lddstub, this is simply * a stub executable employed to preload a user specified library against. * * . If RT_FL_SILENCERR is in effect then any generic ldd() messages should * be suppressed. All detailed ldd messages should still be produced. */ Sym * elf_lookup_filtee(Slookup *slp, Rt_map **dlmp, uint_t *binfo, uint_t ndx, int *in_nfavl) { Sym *sym; Dyninfo *dip = &DYNINFO(slp->sl_imap)[ndx]; int silent = 0; /* * Make sure this entry is still acting as a filter. We may have tried * to process this previously, and disabled it if the filtee couldn't * be processed. However, other entries may provide different filtees * that are yet to be completed. */ if (dip->di_flags == 0) return (NULL); /* * Indicate whether an error message is required should this filtee not * be found, based on the type of filter. */ if ((dip->di_flags & FLG_DI_AUXFLTR) && ((rtld_flags & (RT_FL_WARNFLTR | RT_FL_SILENCERR)) == 0)) { rtld_flags |= RT_FL_SILENCERR; silent = 1; } sym = _elf_lookup_filtee(slp, dlmp, binfo, ndx, in_nfavl); if (silent) rtld_flags &= ~RT_FL_SILENCERR; return (sym); } /* * Compute the elf hash value (as defined in the ELF access library). * The form of the hash table is: * * |--------------| * | # of buckets | * |--------------| * | # of chains | * |--------------| * | bucket[] | * |--------------| * | chain[] | * |--------------| */ ulong_t elf_hash(const char *name) { uint_t hval = 0; while (*name) { uint_t g; hval = (hval << 4) + *name++; if ((g = (hval & 0xf0000000)) != 0) hval ^= g >> 24; hval &= ~g; } return ((ulong_t)hval); } /* * If flag argument has LKUP_SPEC set, we treat undefined symbols of type * function specially in the executable - if they have a value, even though * undefined, we use that value. This allows us to associate all references * to a function's address to a single place in the process: the plt entry * for that function in the executable. Calls to lookup from plt binding * routines do NOT set LKUP_SPEC in the flag. */ Sym * elf_find_sym(Slookup *slp, Rt_map **dlmp, uint_t *binfo, int *in_nfavl) { const char *name = slp->sl_name; Rt_map *ilmp = slp->sl_imap; ulong_t hash = slp->sl_hash; uint_t ndx, htmp, buckets, *chainptr; Sym *sym, *symtabptr; char *strtabptr, *strtabname; uint_t flags1; Syminfo *sip; /* * If we're only here to establish a symbols index, skip the diagnostic * used to trace a symbol search. */ if ((slp->sl_flags & LKUP_SYMNDX) == 0) DBG_CALL(Dbg_syms_lookup(ilmp, name, MSG_ORIG(MSG_STR_ELF))); if (HASH(ilmp) == NULL) return (NULL); buckets = HASH(ilmp)[0]; /* LINTED */ htmp = (uint_t)hash % buckets; /* * Get the first symbol on hash chain and initialize the string * and symbol table pointers. */ if ((ndx = HASH(ilmp)[htmp + 2]) == 0) return (NULL); chainptr = HASH(ilmp) + 2 + buckets; strtabptr = STRTAB(ilmp); symtabptr = SYMTAB(ilmp); while (ndx) { sym = symtabptr + ndx; strtabname = strtabptr + sym->st_name; /* * Compare the symbol found with the name required. If the * names don't match continue with the next hash entry. */ if ((*strtabname++ != *name) || strcmp(strtabname, &name[1])) { if ((ndx = chainptr[ndx]) != 0) continue; return (NULL); } /* * The Solaris ld does not put DT_VERSYM in the dynamic * section, but the GNU ld does. The GNU runtime linker * interprets the top bit of the 16-bit Versym value * (0x8000) as the "hidden" bit. If this bit is set, * the linker is supposed to act as if that symbol does * not exist. The hidden bit supports their versioning * scheme, which allows multiple incompatible functions * with the same name to exist at different versions * within an object. The Solaris linker does not support this * mechanism, or the model of interface evolution that * it allows, but we honor the hidden bit in GNU ld * produced objects in order to interoperate with them. */ if ((VERSYM(ilmp) != NULL) && ((VERSYM(ilmp)[ndx] & 0x8000) != 0)) { DBG_CALL(Dbg_syms_ignore_gnuver(ilmp, name, ndx, VERSYM(ilmp)[ndx])); if ((ndx = chainptr[ndx]) != 0) continue; return (NULL); } /* * If we're only here to establish a symbols index, we're done. */ if (slp->sl_flags & LKUP_SYMNDX) return (sym); /* * If we find a match and the symbol is defined, return the * symbol pointer and the link map in which it was found. */ if (sym->st_shndx != SHN_UNDEF) { *dlmp = ilmp; *binfo |= DBG_BINFO_FOUND; if ((FLAGS(ilmp) & FLG_RT_OBJINTPO) || ((FLAGS(ilmp) & FLG_RT_SYMINTPO) && is_sym_interposer(ilmp, sym))) *binfo |= DBG_BINFO_INTERPOSE; break; /* * If we find a match and the symbol is undefined, the * symbol type is a function, and the value of the symbol * is non zero, then this is a special case. This allows * the resolution of a function address to the plt[] entry. * See SPARC ABI, Dynamic Linking, Function Addresses for * more details. */ } else if ((slp->sl_flags & LKUP_SPEC) && (FLAGS(ilmp) & FLG_RT_ISMAIN) && (sym->st_value != 0) && (ELF_ST_TYPE(sym->st_info) == STT_FUNC)) { *dlmp = ilmp; *binfo |= (DBG_BINFO_FOUND | DBG_BINFO_PLTADDR); if ((FLAGS(ilmp) & FLG_RT_OBJINTPO) || ((FLAGS(ilmp) & FLG_RT_SYMINTPO) && is_sym_interposer(ilmp, sym))) *binfo |= DBG_BINFO_INTERPOSE; return (sym); } /* * Undefined symbol. */ return (NULL); } /* * We've found a match. Determine if the defining object contains * symbol binding information. */ if ((sip = SYMINFO(ilmp)) != NULL) sip += ndx; /* * If this definition is a singleton, and we haven't followed a default * symbol search knowing that we're looking for a singleton (presumably * because the symbol definition has been changed since the referring * object was built), then reject this binding so that the caller can * fall back to a standard symbol search. */ if ((ELF_ST_VISIBILITY(sym->st_other) == STV_SINGLETON) && (((slp->sl_flags & LKUP_STANDARD) == 0) || (((slp->sl_flags & LKUP_SINGLETON) == 0) && (LIST(ilmp)->lm_flags & LML_FLG_GROUPSEXIST)))) { DBG_CALL(Dbg_bind_reject(slp->sl_cmap, ilmp, name, DBG_BNDREJ_SINGLE)); *binfo |= BINFO_REJSINGLE; *binfo &= ~DBG_BINFO_MSK; return (NULL); } /* * If this is a direct binding request, but the symbol definition has * disabled directly binding to it (presumably because the symbol * definition has been changed since the referring object was built), * reject this binding so that the caller can fall back to a standard * symbol search. */ if (sip && (slp->sl_flags & LKUP_DIRECT) && (sip->si_flags & SYMINFO_FLG_NOEXTDIRECT)) { DBG_CALL(Dbg_bind_reject(slp->sl_cmap, ilmp, name, DBG_BNDREJ_DIRECT)); *binfo |= BINFO_REJDIRECT; *binfo &= ~DBG_BINFO_MSK; return (NULL); } /* * If this is a binding request within an RTLD_GROUP family, and the * symbol has disabled directly binding to it, reject this binding so * that the caller can fall back to a standard symbol search. * * Effectively, an RTLD_GROUP family achieves what can now be * established with direct bindings. However, various symbols have * been tagged as inappropriate for direct binding to (ie. libc:malloc). * * A symbol marked as no-direct cannot be used within a group without * first ensuring that the symbol has not been interposed upon outside * of the group. A common example occurs when users implement their own * version of malloc() in the executable. Such a malloc() interposes on * the libc:malloc, and this interposition must be honored within the * group as well. * * Following any rejection, LKUP_WORLD is established as a means of * overriding this test as we return to a standard search. */ if (sip && (sip->si_flags & SYMINFO_FLG_NOEXTDIRECT) && ((MODE(slp->sl_cmap) & (RTLD_GROUP | RTLD_WORLD)) == RTLD_GROUP) && ((slp->sl_flags & LKUP_WORLD) == 0)) { DBG_CALL(Dbg_bind_reject(slp->sl_cmap, ilmp, name, DBG_BNDREJ_GROUP)); *binfo |= BINFO_REJGROUP; *binfo &= ~DBG_BINFO_MSK; return (NULL); } /* * Determine whether this object is acting as a filter. */ if (((flags1 = FLAGS1(ilmp)) & MSK_RT_FILTER) == 0) return (sym); /* * Determine if this object offers per-symbol filtering, and if so, * whether this symbol references a filtee. */ if (sip && (flags1 & (FL1_RT_SYMSFLTR | FL1_RT_SYMAFLTR))) { /* * If this is a standard filter reference, and no standard * filtees remain to be inspected, we're done. If this is an * auxiliary filter reference, and no auxiliary filtees remain, * we'll fall through in case any object filtering is available. */ if ((sip->si_flags & SYMINFO_FLG_FILTER) && (SYMSFLTRCNT(ilmp) == 0)) return (NULL); if ((sip->si_flags & SYMINFO_FLG_FILTER) || ((sip->si_flags & SYMINFO_FLG_AUXILIARY) && SYMAFLTRCNT(ilmp))) { Sym *fsym; /* * This symbol has an associated filtee. Lookup the * symbol in the filtee, and if it is found return it. * If the symbol doesn't exist, and this is a standard * filter, return an error, otherwise fall through to * catch any object filtering that may be available. */ if ((fsym = elf_lookup_filtee(slp, dlmp, binfo, sip->si_boundto, in_nfavl)) != NULL) return (fsym); if (sip->si_flags & SYMINFO_FLG_FILTER) return (NULL); } } /* * Determine if this object provides global filtering. */ if (flags1 & (FL1_RT_OBJSFLTR | FL1_RT_OBJAFLTR)) { Sym *fsym; if (OBJFLTRNDX(ilmp) != FLTR_DISABLED) { /* * This object has an associated filtee. Lookup the * symbol in the filtee, and if it is found return it. * If the symbol doesn't exist, and this is a standard * filter, return and error, otherwise return the symbol * within the filter itself. */ if ((fsym = elf_lookup_filtee(slp, dlmp, binfo, OBJFLTRNDX(ilmp), in_nfavl)) != NULL) return (fsym); } if (flags1 & FL1_RT_OBJSFLTR) return (NULL); } return (sym); } /* * Create a new Rt_map structure for an ELF object and initialize * all values. */ Rt_map * elf_new_lmp(Lm_list *lml, Aliste lmco, Fdesc *fdp, Addr addr, size_t msize, void *odyn, int *in_nfavl) { const char *name = fdp->fd_nname; Rt_map *lmp; Ehdr *ehdr = (Ehdr *)addr; Phdr *phdr, *tphdr = NULL, *dphdr = NULL, *uphdr = NULL; Dyn *dyn = (Dyn *)odyn; Cap *cap = NULL; int ndx; Addr base, fltr = 0, audit = 0, cfile = 0, crle = 0; Xword rpath = 0; size_t lmsz, rtsz, epsz, dynsz = 0; uint_t dyncnt = 0; DBG_CALL(Dbg_file_elf(lml, name, addr, msize, lml->lm_lmidstr, lmco)); /* * If this is a shared object, the base address of the shared object is * added to all address values defined within the object. Otherwise, if * this is an executable, all object addresses are used as is. */ if (ehdr->e_type == ET_EXEC) base = 0; else base = addr; /* * Traverse the program header table, picking off required items. This * traversal also provides for the sizing of the PT_DYNAMIC section. */ phdr = (Phdr *)((uintptr_t)ehdr + ehdr->e_phoff); for (ndx = 0; ndx < (int)ehdr->e_phnum; ndx++, phdr = (Phdr *)((uintptr_t)phdr + ehdr->e_phentsize)) { switch (phdr->p_type) { case PT_DYNAMIC: dphdr = phdr; dyn = (Dyn *)((uintptr_t)phdr->p_vaddr + base); break; case PT_TLS: tphdr = phdr; break; case PT_SUNWCAP: cap = (Cap *)((uintptr_t)phdr->p_vaddr + base); break; case PT_SUNW_UNWIND: case PT_SUNW_EH_FRAME: uphdr = phdr; break; default: break; } } /* * Determine the number of PT_DYNAMIC entries for the DYNINFO() * allocation. Sadly, this is a little larger than we really need, * as there are typically padding DT_NULL entries. However, adding * this data to the initial link-map allocation is a win. */ if (dyn) { dyncnt = dphdr->p_filesz / sizeof (Dyn); dynsz = dyncnt * sizeof (Dyninfo); } /* * Allocate space for the link-map, private elf information, and * DYNINFO() data. Once these are allocated and initialized, * remove_so(0, lmp) can be used to tear down the link-map allocation * should any failures occur. */ rtsz = S_DROUND(sizeof (Rt_map)); epsz = S_DROUND(sizeof (Rt_elfp)); lmsz = rtsz + epsz + dynsz; if ((lmp = calloc(lmsz, 1)) == NULL) return (NULL); ELFPRV(lmp) = (void *)((uintptr_t)lmp + rtsz); DYNINFO(lmp) = (Dyninfo *)((uintptr_t)lmp + rtsz + epsz); LMSIZE(lmp) = lmsz; /* * All fields not filled in were set to 0 by calloc. */ NAME(lmp) = (char *)name; ADDR(lmp) = addr; MSIZE(lmp) = msize; SYMINTP(lmp) = elf_find_sym; FCT(lmp) = &elf_fct; LIST(lmp) = lml; OBJFLTRNDX(lmp) = FLTR_DISABLED; SORTVAL(lmp) = -1; DYN(lmp) = dyn; DYNINFOCNT(lmp) = dyncnt; PTUNWIND(lmp) = uphdr; if (ehdr->e_type == ET_EXEC) FLAGS(lmp) |= FLG_RT_FIXED; /* * Fill in rest of the link map entries with information from the file's * dynamic structure. */ if (dyn) { uint_t dynndx = 0; Xword pltpadsz = 0; Rti_desc *rti; /* CSTYLED */ for ( ; dyn->d_tag != DT_NULL; ++dyn, dynndx++) { switch ((Xword)dyn->d_tag) { case DT_SYMTAB: SYMTAB(lmp) = (void *)(dyn->d_un.d_ptr + base); break; case DT_SUNW_SYMTAB: SUNWSYMTAB(lmp) = (void *)(dyn->d_un.d_ptr + base); break; case DT_SUNW_SYMSZ: SUNWSYMSZ(lmp) = dyn->d_un.d_val; break; case DT_STRTAB: STRTAB(lmp) = (void *)(dyn->d_un.d_ptr + base); break; case DT_SYMENT: SYMENT(lmp) = dyn->d_un.d_val; break; case DT_FEATURE_1: dyn->d_un.d_val |= DTF_1_PARINIT; if (dyn->d_un.d_val & DTF_1_CONFEXP) crle = 1; break; case DT_MOVESZ: MOVESZ(lmp) = dyn->d_un.d_val; FLAGS(lmp) |= FLG_RT_MOVE; break; case DT_MOVEENT: MOVEENT(lmp) = dyn->d_un.d_val; break; case DT_MOVETAB: MOVETAB(lmp) = (void *)(dyn->d_un.d_ptr + base); break; case DT_REL: case DT_RELA: /* * At this time, ld.so. can only handle one * type of relocation per object. */ REL(lmp) = (void *)(dyn->d_un.d_ptr + base); break; case DT_RELSZ: case DT_RELASZ: RELSZ(lmp) = dyn->d_un.d_val; break; case DT_RELENT: case DT_RELAENT: RELENT(lmp) = dyn->d_un.d_val; break; case DT_RELCOUNT: case DT_RELACOUNT: RELACOUNT(lmp) = (uint_t)dyn->d_un.d_val; break; case DT_HASH: HASH(lmp) = (uint_t *)(dyn->d_un.d_ptr + base); break; case DT_PLTGOT: PLTGOT(lmp) = (uint_t *)(dyn->d_un.d_ptr + base); break; case DT_PLTRELSZ: PLTRELSZ(lmp) = dyn->d_un.d_val; break; case DT_JMPREL: JMPREL(lmp) = (void *)(dyn->d_un.d_ptr + base); break; case DT_INIT: if (dyn->d_un.d_ptr != NULL) INIT(lmp) = (void (*)())(dyn->d_un.d_ptr + base); break; case DT_FINI: if (dyn->d_un.d_ptr != NULL) FINI(lmp) = (void (*)())(dyn->d_un.d_ptr + base); break; case DT_INIT_ARRAY: INITARRAY(lmp) = (Addr *)(dyn->d_un.d_ptr + base); break; case DT_INIT_ARRAYSZ: INITARRAYSZ(lmp) = (uint_t)dyn->d_un.d_val; break; case DT_FINI_ARRAY: FINIARRAY(lmp) = (Addr *)(dyn->d_un.d_ptr + base); break; case DT_FINI_ARRAYSZ: FINIARRAYSZ(lmp) = (uint_t)dyn->d_un.d_val; break; case DT_PREINIT_ARRAY: PREINITARRAY(lmp) = (Addr *)(dyn->d_un.d_ptr + base); break; case DT_PREINIT_ARRAYSZ: PREINITARRAYSZ(lmp) = (uint_t)dyn->d_un.d_val; break; case DT_RPATH: case DT_RUNPATH: rpath = dyn->d_un.d_val; break; case DT_FILTER: fltr = dyn->d_un.d_val; OBJFLTRNDX(lmp) = dynndx; FLAGS1(lmp) |= FL1_RT_OBJSFLTR; break; case DT_AUXILIARY: if (!(rtld_flags & RT_FL_NOAUXFLTR)) { fltr = dyn->d_un.d_val; OBJFLTRNDX(lmp) = dynndx; } FLAGS1(lmp) |= FL1_RT_OBJAFLTR; break; case DT_SUNW_FILTER: SYMSFLTRCNT(lmp)++; FLAGS1(lmp) |= FL1_RT_SYMSFLTR; break; case DT_SUNW_AUXILIARY: if (!(rtld_flags & RT_FL_NOAUXFLTR)) { SYMAFLTRCNT(lmp)++; } FLAGS1(lmp) |= FL1_RT_SYMAFLTR; break; case DT_DEPAUDIT: if (!(rtld_flags & RT_FL_NOAUDIT)) audit = dyn->d_un.d_val; break; case DT_CONFIG: cfile = dyn->d_un.d_val; break; case DT_DEBUG: /* * DT_DEBUG entries are only created in * dynamic objects that require an interpretor * (ie. all dynamic executables and some shared * objects), and provide for a hand-shake with * old debuggers. This entry is initialized to * zero by the link-editor. If a debugger is * monitoring us, and has updated this entry, * set the debugger monitor flag, and finish * initializing the debugging structure. See * setup(). Also, switch off any configuration * object use as most debuggers can't handle * fixed dynamic executables as dependencies. */ if (dyn->d_un.d_ptr) rtld_flags |= (RT_FL_DEBUGGER | RT_FL_NOOBJALT); dyn->d_un.d_ptr = (Addr)&r_debug; break; case DT_VERNEED: VERNEED(lmp) = (Verneed *)(dyn->d_un.d_ptr + base); break; case DT_VERNEEDNUM: /* LINTED */ VERNEEDNUM(lmp) = (int)dyn->d_un.d_val; break; case DT_VERDEF: VERDEF(lmp) = (Verdef *)(dyn->d_un.d_ptr + base); break; case DT_VERDEFNUM: /* LINTED */ VERDEFNUM(lmp) = (int)dyn->d_un.d_val; break; case DT_VERSYM: /* * The Solaris ld does not produce DT_VERSYM, * but the GNU ld does, in order to support * their style of versioning, which differs * from ours in some ways, while using the * same data structures. The presence of * DT_VERSYM therefore means that GNU * versioning rules apply to the given file. * If DT_VERSYM is not present, then Solaris * versioning rules apply. */ VERSYM(lmp) = (Versym *)(dyn->d_un.d_ptr + base); break; case DT_BIND_NOW: if ((dyn->d_un.d_val & DF_BIND_NOW) && ((rtld_flags2 & RT_FL2_BINDLAZY) == 0)) { MODE(lmp) |= RTLD_NOW; MODE(lmp) &= ~RTLD_LAZY; } break; case DT_FLAGS: FLAGS1(lmp) |= FL1_RT_DTFLAGS; if (dyn->d_un.d_val & DF_SYMBOLIC) FLAGS1(lmp) |= FL1_RT_SYMBOLIC; if ((dyn->d_un.d_val & DF_BIND_NOW) && ((rtld_flags2 & RT_FL2_BINDLAZY) == 0)) { MODE(lmp) |= RTLD_NOW; MODE(lmp) &= ~RTLD_LAZY; } /* * Capture any static TLS use, and enforce that * this object be non-deletable. */ if (dyn->d_un.d_val & DF_STATIC_TLS) { FLAGS1(lmp) |= FL1_RT_TLSSTAT; MODE(lmp) |= RTLD_NODELETE; } break; case DT_FLAGS_1: if (dyn->d_un.d_val & DF_1_DISPRELPND) FLAGS1(lmp) |= FL1_RT_DISPREL; if (dyn->d_un.d_val & DF_1_GROUP) FLAGS(lmp) |= (FLG_RT_SETGROUP | FLG_RT_HANDLE); if ((dyn->d_un.d_val & DF_1_NOW) && ((rtld_flags2 & RT_FL2_BINDLAZY) == 0)) { MODE(lmp) |= RTLD_NOW; MODE(lmp) &= ~RTLD_LAZY; } if (dyn->d_un.d_val & DF_1_NODELETE) MODE(lmp) |= RTLD_NODELETE; if (dyn->d_un.d_val & DF_1_INITFIRST) FLAGS(lmp) |= FLG_RT_INITFRST; if (dyn->d_un.d_val & DF_1_NOOPEN) FLAGS(lmp) |= FLG_RT_NOOPEN; if (dyn->d_un.d_val & DF_1_LOADFLTR) FLAGS(lmp) |= FLG_RT_LOADFLTR; if (dyn->d_un.d_val & DF_1_NODUMP) FLAGS(lmp) |= FLG_RT_NODUMP; if (dyn->d_un.d_val & DF_1_CONFALT) crle = 1; if (dyn->d_un.d_val & DF_1_DIRECT) FLAGS1(lmp) |= FL1_RT_DIRECT; if (dyn->d_un.d_val & DF_1_NODEFLIB) FLAGS1(lmp) |= FL1_RT_NODEFLIB; if (dyn->d_un.d_val & DF_1_ENDFILTEE) FLAGS1(lmp) |= FL1_RT_ENDFILTE; if (dyn->d_un.d_val & DF_1_TRANS) FLAGS(lmp) |= FLG_RT_TRANS; /* * Global auditing is only meaningful when * specified by the initiating object of the * process - typically the dynamic executable. * If this is the initiaiting object, its link- * map will not yet have been added to the * link-map list, and consequently the link-map * list is empty. (see setup()). */ if (dyn->d_un.d_val & DF_1_GLOBAUDIT) { if (lml_main.lm_head == NULL) FLAGS1(lmp) |= FL1_RT_GLOBAUD; else DBG_CALL(Dbg_audit_ignore(lmp)); } /* * If this object identifies itself as an * interposer, but relocation processing has * already started, then demote it. It's too * late to guarantee complete interposition. */ /* BEGIN CSTYLED */ if (dyn->d_un.d_val & (DF_1_INTERPOSE | DF_1_SYMINTPOSE)) { if (lml->lm_flags & LML_FLG_STARTREL) { DBG_CALL(Dbg_util_intoolate(lmp)); if (lml->lm_flags & LML_FLG_TRC_ENABLE) (void) printf( MSG_INTL(MSG_LDD_REL_ERR2), NAME(lmp)); } else if (dyn->d_un.d_val & DF_1_INTERPOSE) FLAGS(lmp) |= FLG_RT_OBJINTPO; else FLAGS(lmp) |= FLG_RT_SYMINTPO; } /* END CSTYLED */ break; case DT_SYMINFO: SYMINFO(lmp) = (Syminfo *)(dyn->d_un.d_ptr + base); break; case DT_SYMINENT: SYMINENT(lmp) = dyn->d_un.d_val; break; case DT_PLTPAD: PLTPAD(lmp) = (void *)(dyn->d_un.d_ptr + base); break; case DT_PLTPADSZ: pltpadsz = dyn->d_un.d_val; break; case DT_SUNW_RTLDINF: /* * Maintain a list of RTLDINFO structures. * Typically, libc is the only supplier, and * only one structure is provided. However, * multiple suppliers and multiple structures * are supported. For example, one structure * may provide thread_init, and another * structure may provide atexit reservations. */ if ((rti = alist_append(&lml->lm_rti, NULL, sizeof (Rti_desc), AL_CNT_RTLDINFO)) == NULL) { remove_so(0, lmp); return (NULL); } rti->rti_lmp = lmp; rti->rti_info = (void *)(dyn->d_un.d_ptr + base); break; case DT_SUNW_SORTENT: SUNWSORTENT(lmp) = dyn->d_un.d_val; break; case DT_SUNW_SYMSORT: SUNWSYMSORT(lmp) = (void *)(dyn->d_un.d_ptr + base); break; case DT_SUNW_SYMSORTSZ: SUNWSYMSORTSZ(lmp) = dyn->d_un.d_val; break; case DT_DEPRECATED_SPARC_REGISTER: case M_DT_REGISTER: FLAGS(lmp) |= FLG_RT_REGSYMS; break; } } if (PLTPAD(lmp)) { if (pltpadsz == (Xword)0) PLTPAD(lmp) = NULL; else PLTPADEND(lmp) = (void *)((Addr)PLTPAD(lmp) + pltpadsz); } } /* * A dynsym contains only global functions. We want to have * a version of it that also includes local functions, so that * dladdr() will be able to report names for local functions * when used to generate a stack trace for a stripped file. * This version of the dynsym is provided via DT_SUNW_SYMTAB. * * In producing DT_SUNW_SYMTAB, ld uses a non-obvious trick * in order to avoid having to have two copies of the global * symbols held in DT_SYMTAB: The local symbols are placed in * a separate section than the globals in the dynsym, but the * linker conspires to put the data for these two sections adjacent * to each other. DT_SUNW_SYMTAB points at the top of the local * symbols, and DT_SUNW_SYMSZ is the combined length of both tables. * * If the two sections are not adjacent, then something went wrong * at link time. We use ASSERT to kill the process if this is * a debug build. In a production build, we will silently ignore * the presence of the .ldynsym and proceed. We can detect this * situation by checking to see that DT_SYMTAB lies in * the range given by DT_SUNW_SYMTAB/DT_SUNW_SYMSZ. */ if ((SUNWSYMTAB(lmp) != NULL) && (((char *)SYMTAB(lmp) <= (char *)SUNWSYMTAB(lmp)) || (((char *)SYMTAB(lmp) >= (SUNWSYMSZ(lmp) + (char *)SUNWSYMTAB(lmp)))))) { ASSERT(0); SUNWSYMTAB(lmp) = NULL; SUNWSYMSZ(lmp) = 0; } /* * If configuration file use hasn't been disabled, and a configuration * file hasn't already been set via an environment variable, see if any * application specific configuration file is specified. An LD_CONFIG * setting is used first, but if this image was generated via crle(1) * then a default configuration file is a fall-back. */ if ((!(rtld_flags & RT_FL_NOCFG)) && (config->c_name == NULL)) { if (cfile) config->c_name = (const char *)(cfile + (char *)STRTAB(lmp)); else if (crle) rtld_flags |= RT_FL_CONFAPP; } if (rpath) RPATH(lmp) = (char *)(rpath + (char *)STRTAB(lmp)); if (fltr) REFNAME(lmp) = (char *)(fltr + (char *)STRTAB(lmp)); /* * For Intel ABI compatibility. It's possible that a JMPREL can be * specified without any other relocations (e.g. a dynamic executable * normally only contains .plt relocations). If this is the case then * no REL, RELSZ or RELENT will have been created. For us to be able * to traverse the .plt relocations under LD_BIND_NOW we need to know * the RELENT for these relocations. Refer to elf_reloc() for more * details. */ if (!RELENT(lmp) && JMPREL(lmp)) RELENT(lmp) = sizeof (M_RELOC); /* * Establish any per-object auditing. If we're establishing `main's * link-map its too early to go searching for audit objects so just * hold the object name for later (see setup()). */ if (audit) { char *cp = audit + (char *)STRTAB(lmp); if (*cp) { if (((AUDITORS(lmp) = calloc(1, sizeof (Audit_desc))) == NULL) || ((AUDITORS(lmp)->ad_name = strdup(cp)) == NULL)) { remove_so(0, lmp); return (NULL); } if (lml_main.lm_head) { if (audit_setup(lmp, AUDITORS(lmp), 0, in_nfavl) == 0) { remove_so(0, lmp); return (NULL); } AFLAGS(lmp) |= AUDITORS(lmp)->ad_flags; lml->lm_flags |= LML_FLG_LOCAUDIT; } } } if (tphdr && (tls_assign(lml, lmp, tphdr) == 0)) { remove_so(0, lmp); return (NULL); } if (cap) cap_assign(cap, lmp); /* * Add the mapped object to the end of the link map list. */ lm_append(lml, lmco, lmp); /* * Start the system loading in the ELF information we'll be processing. */ if (REL(lmp)) { (void) madvise((void *)ADDR(lmp), (uintptr_t)REL(lmp) + (uintptr_t)RELSZ(lmp) - (uintptr_t)ADDR(lmp), MADV_WILLNEED); } return (lmp); } /* * Assign hardware/software capabilities. */ void cap_assign(Cap *cap, Rt_map *lmp) { while (cap->c_tag != CA_SUNW_NULL) { switch (cap->c_tag) { case CA_SUNW_HW_1: HWCAP(lmp) = cap->c_un.c_val; break; case CA_SUNW_SF_1: SFCAP(lmp) = cap->c_un.c_val; } cap++; } } /* * Build full pathname of shared object from given directory name and filename. */ static char * elf_get_so(const char *dir, const char *file, size_t dlen, size_t flen) { static char pname[PATH_MAX]; (void) strncpy(pname, dir, dlen); pname[dlen++] = '/'; (void) strncpy(&pname[dlen], file, flen + 1); return (pname); } /* * The copy relocation is recorded in a copy structure which will be applied * after all other relocations are carried out. This provides for copying data * that must be relocated itself (ie. pointers in shared objects). This * structure also provides a means of binding RTLD_GROUP dependencies to any * copy relocations that have been taken from any group members. * * If the size of the .bss area available for the copy information is not the * same as the source of the data inform the user if we're under ldd(1) control * (this checking was only established in 5.3, so by only issuing an error via * ldd(1) we maintain the standard set by previous releases). */ int elf_copy_reloc(char *name, Sym *rsym, Rt_map *rlmp, void *radd, Sym *dsym, Rt_map *dlmp, const void *dadd) { Rel_copy rc; Lm_list *lml = LIST(rlmp); rc.r_name = name; rc.r_rsym = rsym; /* the new reference symbol and its */ rc.r_rlmp = rlmp; /* associated link-map */ rc.r_dlmp = dlmp; /* the defining link-map */ rc.r_dsym = dsym; /* the original definition */ rc.r_radd = radd; rc.r_dadd = dadd; if (rsym->st_size > dsym->st_size) rc.r_size = (size_t)dsym->st_size; else rc.r_size = (size_t)rsym->st_size; if (alist_append(©_R(dlmp), &rc, sizeof (Rel_copy), AL_CNT_COPYREL) == NULL) { if (!(lml->lm_flags & LML_FLG_TRC_WARN)) return (0); else return (1); } if (!(FLAGS1(dlmp) & FL1_RT_COPYTOOK)) { if (aplist_append(©_S(rlmp), dlmp, AL_CNT_COPYREL) == NULL) { if (!(lml->lm_flags & LML_FLG_TRC_WARN)) return (0); else return (1); } FLAGS1(dlmp) |= FL1_RT_COPYTOOK; } /* * If we are tracing (ldd), warn the user if * 1) the size from the reference symbol differs from the * copy definition. We can only copy as much data as the * reference (dynamic executables) entry allows. * 2) the copy definition has STV_PROTECTED visibility. */ if (lml->lm_flags & LML_FLG_TRC_WARN) { if (rsym->st_size != dsym->st_size) { (void) printf(MSG_INTL(MSG_LDD_CPY_SIZDIF), _conv_reloc_type(M_R_COPY), demangle(name), NAME(rlmp), EC_XWORD(rsym->st_size), NAME(dlmp), EC_XWORD(dsym->st_size)); if (rsym->st_size > dsym->st_size) (void) printf(MSG_INTL(MSG_LDD_CPY_INSDATA), NAME(dlmp)); else (void) printf(MSG_INTL(MSG_LDD_CPY_DATRUNC), NAME(rlmp)); } if (ELF_ST_VISIBILITY(dsym->st_other) == STV_PROTECTED) { (void) printf(MSG_INTL(MSG_LDD_CPY_PROT), _conv_reloc_type(M_R_COPY), demangle(name), NAME(dlmp)); } } DBG_CALL(Dbg_reloc_apply_val(lml, ELF_DBG_RTLD, (Xword)radd, (Xword)rc.r_size)); return (1); } /* * Determine the symbol location of an address within a link-map. Look for * the nearest symbol (whose value is less than or equal to the required * address). This is the object specific part of dladdr(). */ static void elf_dladdr(ulong_t addr, Rt_map *lmp, Dl_info *dlip, void **info, int flags) { ulong_t ndx, cnt, base, _value; Sym *sym, *_sym = NULL; const char *str; int _flags; uint_t *dynaddr_ndx; uint_t dynaddr_n = 0; ulong_t value; /* * If SUNWSYMTAB() is non-NULL, then it sees a special version of * the dynsym that starts with any local function symbols that exist in * the library and then moves to the data held in SYMTAB(). In this * case, SUNWSYMSZ tells us how long the symbol table is. The * availability of local function symbols will enhance the results * we can provide. * * If SUNWSYMTAB() is non-NULL, then there might also be a * SUNWSYMSORT() vector associated with it. SUNWSYMSORT() contains * an array of indices into SUNWSYMTAB, sorted by increasing * address. We can use this to do an O(log N) search instead of a * brute force search. * * If SUNWSYMTAB() is NULL, then SYMTAB() references a dynsym that * contains only global symbols. In that case, the length of * the symbol table comes from the nchain field of the related * symbol lookup hash table. */ str = STRTAB(lmp); if (SUNWSYMSZ(lmp) == NULL) { sym = SYMTAB(lmp); /* * If we don't have a .hash table there are no symbols * to look at. */ if (HASH(lmp) == NULL) return; cnt = HASH(lmp)[1]; } else { sym = SUNWSYMTAB(lmp); cnt = SUNWSYMSZ(lmp) / SYMENT(lmp); dynaddr_ndx = SUNWSYMSORT(lmp); if (dynaddr_ndx != NULL) dynaddr_n = SUNWSYMSORTSZ(lmp) / SUNWSORTENT(lmp); } if (FLAGS(lmp) & FLG_RT_FIXED) base = 0; else base = ADDR(lmp); if (dynaddr_n > 0) { /* Binary search */ long low = 0, low_bnd; long high = dynaddr_n - 1, high_bnd; long mid; Sym *mid_sym; /* * Note that SUNWSYMSORT only contains symbols types that * supply memory addresses, so there's no need to check and * filter out any other types. */ low_bnd = low; high_bnd = high; while (low <= high) { mid = (low + high) / 2; mid_sym = &sym[dynaddr_ndx[mid]]; value = mid_sym->st_value + base; if (addr < value) { if ((sym[dynaddr_ndx[high]].st_value + base) >= addr) high_bnd = high; high = mid - 1; } else if (addr > value) { if ((sym[dynaddr_ndx[low]].st_value + base) <= addr) low_bnd = low; low = mid + 1; } else { _sym = mid_sym; _value = value; break; } } /* * If the above didn't find it exactly, then we must * return the closest symbol with a value that doesn't * exceed the one we are looking for. If that symbol exists, * it will lie in the range bounded by low_bnd and * high_bnd. This is a linear search, but a short one. */ if (_sym == NULL) { for (mid = low_bnd; mid <= high_bnd; mid++) { mid_sym = &sym[dynaddr_ndx[mid]]; value = mid_sym->st_value + base; if (addr >= value) { _sym = mid_sym; _value = value; } else { break; } } } } else { /* Linear search */ for (_value = 0, sym++, ndx = 1; ndx < cnt; ndx++, sym++) { /* * Skip expected symbol types that are not functions * or data: * - A symbol table starts with an undefined symbol * in slot 0. If we are using SUNWSYMTAB(), * there will be a second undefined symbol * right before the globals. * - The local part of SUNWSYMTAB() contains a * series of function symbols. Each section * starts with an initial STT_FILE symbol. */ if ((sym->st_shndx == SHN_UNDEF) || (ELF_ST_TYPE(sym->st_info) == STT_FILE)) continue; value = sym->st_value + base; if (value > addr) continue; if (value < _value) continue; _sym = sym; _value = value; /* * Note, because we accept local and global symbols * we could find a section symbol that matches the * associated address, which means that the symbol * name will be null. In this case continue the * search in case we can find a global symbol of * the same value. */ if ((value == addr) && (ELF_ST_TYPE(sym->st_info) != STT_SECTION)) break; } } _flags = flags & RTLD_DL_MASK; if (_sym) { if (_flags == RTLD_DL_SYMENT) *info = (void *)_sym; else if (_flags == RTLD_DL_LINKMAP) *info = (void *)lmp; dlip->dli_sname = str + _sym->st_name; dlip->dli_saddr = (void *)_value; } else { /* * addr lies between the beginning of the mapped segment and * the first global symbol. We have no symbol to return * and the caller requires one. We use _START_, the base * address of the mapping. */ if (_flags == RTLD_DL_SYMENT) { /* * An actual symbol struct is needed, so we * construct one for _START_. To do this in a * fully accurate way requires a different symbol * for each mapped segment. This requires the * use of dynamic memory and a mutex. That's too much * plumbing for a fringe case of limited importance. * * Fortunately, we can simplify: * - Only the st_size and st_info fields are useful * outside of the linker internals. The others * reference things that outside code cannot see, * and can be set to 0. * - It's just a label and there is no size * to report. So, the size should be 0. * This means that only st_info needs a non-zero * (constant) value. A static struct will suffice. * It must be const (readonly) so the caller can't * change its meaning for subsequent callers. */ static const Sym fsym = { 0, 0, 0, ELF_ST_INFO(STB_LOCAL, STT_OBJECT) }; *info = (void *) &fsym; } dlip->dli_sname = MSG_ORIG(MSG_SYM_START); dlip->dli_saddr = (void *) ADDR(lmp); } } static void elf_lazy_cleanup(APlist *alp) { Rt_map *lmp; Aliste idx; /* * Cleanup any link-maps added to this dynamic list and free it. */ for (APLIST_TRAVERSE(alp, idx, lmp)) FLAGS(lmp) &= ~FLG_RT_TMPLIST; free(alp); } /* * This routine is called as a last fall-back to search for a symbol from a * standard relocation. To maintain lazy loadings goal of reducing the number * of objects mapped, any symbol search is first carried out using the objects * that already exist in the process (either on a link-map list or handle). * If a symbol can't be found, and lazy dependencies are still pending, this * routine loads the dependencies in an attempt to locate the symbol. * * Only new objects are inspected as we will have already inspected presently * loaded objects before calling this routine. However, a new object may not * be new - although the di_lmp might be zero, the object may have been mapped * as someone elses dependency. Thus there's a possibility of some symbol * search duplication. */ Sym * elf_lazy_find_sym(Slookup *slp, Rt_map **_lmp, uint_t *binfo, int *in_nfavl) { Sym *sym = NULL; APlist *alist = NULL; Aliste idx; Rt_map *lmp1, *lmp = slp->sl_imap; const char *name = slp->sl_name; /* * Generate a local list of new objects to process. This list can grow * as each object supplies its own lazy dependencies. */ if (aplist_append(&alist, lmp, AL_CNT_LAZYFIND) == NULL) return (NULL); FLAGS(lmp) |= FLG_RT_TMPLIST; for (APLIST_TRAVERSE(alist, idx, lmp1)) { uint_t cnt = 0; Slookup sl = *slp; Dyninfo *dip, *pdip; /* * Discard any relocation index from further symbol searches. * This index will have already been used to trigger any * necessary lazy-loads, and it might be because one of these * lazy loads have failed that we're here performing this * fallback. By removing the relocation index we don't try * and perform the same failed lazy loading activity again. */ sl.sl_rsymndx = 0; /* * Loop through the lazy DT_NEEDED entries examining each object * for the required symbol. If the symbol is not found, the * object is in turn added to the local alist, so that the * objects lazy DT_NEEDED entries can be examined. */ lmp = lmp1; for (dip = DYNINFO(lmp), pdip = NULL; cnt < DYNINFOCNT(lmp); cnt++, pdip = dip++) { Rt_map *nlmp; if (((dip->di_flags & FLG_DI_LAZY) == 0) || dip->di_info) continue; /* * If this object has already failed to lazy load, and * we're still processing the same runtime linker * operation that produced the failure, don't bother * to try and load the object again. */ if ((dip->di_flags & FLG_DI_LAZYFAIL) && pdip && (pdip->di_flags & FLG_DI_POSFLAG1)) { if (pdip->di_info == (void *)ld_entry_cnt) continue; dip->di_flags &= ~FLG_DI_LAZYFAIL; pdip->di_info = NULL; } /* * Try loading this lazy dependency. If the object * can't be loaded, consider this non-fatal and continue * the search. Lazy loaded dependencies need not exist * and their loading should only turn out to be fatal * if they are required to satisfy a relocation. * * If the file is already loaded and relocated we must * still inspect it for symbols, even though it might * have already been searched. This lazy load operation * might have promoted the permissions of the object, * and thus made the object applicable for this symbol * search, whereas before the object might have been * skipped. */ if ((nlmp = elf_lazy_load(lmp, &sl, cnt, name, in_nfavl)) == NULL) continue; /* * If this object isn't yet a part of the dynamic list * then inspect it for the symbol. If the symbol isn't * found add the object to the dynamic list so that we * can inspect its dependencies. */ if (FLAGS(nlmp) & FLG_RT_TMPLIST) continue; sl.sl_imap = nlmp; if (sym = lookup_sym(&sl, _lmp, binfo, in_nfavl)) break; /* * Some dlsym() operations are already traversing a * link-map (dlopen(0)), and thus there's no need to * build our own dynamic dependency list. */ if ((sl.sl_flags & LKUP_NODESCENT) == 0) { if (aplist_append(&alist, nlmp, AL_CNT_LAZYFIND) == NULL) { elf_lazy_cleanup(alist); return (NULL); } FLAGS(nlmp) |= FLG_RT_TMPLIST; } } if (sym) break; } elf_lazy_cleanup(alist); return (sym); } /* * Warning message for bad r_offset. */ void elf_reloc_bad(Rt_map *lmp, void *rel, uchar_t rtype, ulong_t roffset, ulong_t rsymndx) { const char *name = NULL; Lm_list *lml = LIST(lmp); int trace; if ((lml->lm_flags & LML_FLG_TRC_ENABLE) && (((rtld_flags & RT_FL_SILENCERR) == 0) || (lml->lm_flags & LML_FLG_TRC_VERBOSE))) trace = 1; else trace = 0; if ((trace == 0) && (DBG_ENABLED == 0)) return; if (rsymndx) { Sym *symref = (Sym *)((ulong_t)SYMTAB(lmp) + (rsymndx * SYMENT(lmp))); if (ELF_ST_BIND(symref->st_info) != STB_LOCAL) name = (char *)(STRTAB(lmp) + symref->st_name); } if (name == NULL) name = MSG_INTL(MSG_STR_UNKNOWN); if (trace) { const char *rstr; rstr = _conv_reloc_type((uint_t)rtype); (void) printf(MSG_INTL(MSG_LDD_REL_ERR1), rstr, name, EC_ADDR(roffset)); return; } Dbg_reloc_error(lml, ELF_DBG_RTLD, M_MACH, M_REL_SHT_TYPE, rel, name); } /* * Resolve a static TLS relocation. */ long elf_static_tls(Rt_map *lmp, Sym *sym, void *rel, uchar_t rtype, char *name, ulong_t roffset, long value) { Lm_list *lml = LIST(lmp); /* * Relocations against a static TLS block have limited support once * process initialization has completed. Any error condition should be * discovered by testing for DF_STATIC_TLS as part of loading an object, * however individual relocations are tested in case the dynamic flag * had not been set when this object was built. */ if (PTTLS(lmp) == NULL) { DBG_CALL(Dbg_reloc_in(lml, ELF_DBG_RTLD, M_MACH, M_REL_SHT_TYPE, rel, NULL, name)); eprintf(lml, ERR_FATAL, MSG_INTL(MSG_REL_BADTLS), _conv_reloc_type((uint_t)rtype), NAME(lmp), name ? demangle(name) : MSG_INTL(MSG_STR_UNKNOWN)); return (0); } /* * If no static TLS has been set aside for this object, determine if * any can be obtained. Enforce that any object using static TLS is * non-deletable. */ if (TLSSTATOFF(lmp) == 0) { FLAGS1(lmp) |= FL1_RT_TLSSTAT; MODE(lmp) |= RTLD_NODELETE; if (tls_assign(lml, lmp, PTTLS(lmp)) == 0) { DBG_CALL(Dbg_reloc_in(lml, ELF_DBG_RTLD, M_MACH, M_REL_SHT_TYPE, rel, NULL, name)); eprintf(lml, ERR_FATAL, MSG_INTL(MSG_REL_BADTLS), _conv_reloc_type((uint_t)rtype), NAME(lmp), name ? demangle(name) : MSG_INTL(MSG_STR_UNKNOWN)); return (0); } } /* * Typically, a static TLS offset is maintained as a symbols value. * For local symbols that are not apart of the dynamic symbol table, * the TLS relocation points to a section symbol, and the static TLS * offset was deposited in the associated GOT table. Make sure the GOT * is cleared, so that the value isn't reused in do_reloc(). */ if (ELF_ST_BIND(sym->st_info) == STB_LOCAL) { if ((ELF_ST_TYPE(sym->st_info) == STT_SECTION)) { value = *(long *)roffset; *(long *)roffset = 0; } else { value = sym->st_value; } } return (-(TLSSTATOFF(lmp) - value)); } /* * If the symbol is not found and the reference was not to a weak symbol, report * an error. Weak references may be unresolved. */ int elf_reloc_error(Rt_map *lmp, const char *name, void *rel, uint_t binfo) { Lm_list *lml = LIST(lmp); /* * Under crle(1), relocation failures are ignored. */ if (lml->lm_flags & LML_FLG_IGNRELERR) return (1); /* * Under ldd(1), unresolved references are reported. However, if the * original reference is EXTERN or PARENT these references are ignored * unless ldd's -p option is in effect. */ if (lml->lm_flags & LML_FLG_TRC_WARN) { if (((binfo & DBG_BINFO_REF_MSK) == 0) || ((lml->lm_flags & LML_FLG_TRC_NOPAREXT) != 0)) { (void) printf(MSG_INTL(MSG_LDD_SYM_NFOUND), demangle(name), NAME(lmp)); } return (1); } /* * Otherwise, the unresolved references is fatal. */ DBG_CALL(Dbg_reloc_in(lml, ELF_DBG_RTLD, M_MACH, M_REL_SHT_TYPE, rel, NULL, name)); eprintf(lml, ERR_FATAL, MSG_INTL(MSG_REL_NOSYM), NAME(lmp), demangle(name)); return (0); } /* * Generic relative relocation function. */ inline static ulong_t _elf_reloc_relative(ulong_t rbgn, ulong_t base, Rt_map *lmp, APlist **textrel) { mmapobj_result_t *mpp; ulong_t roffset; roffset = ((M_RELOC *)rbgn)->r_offset; roffset += base; /* * If this relocation is against an address that is not associated with * a mapped segment, fall back to the generic relocation loop to * collect the associated error. */ if ((mpp = find_segment((caddr_t)roffset, lmp)) == NULL) return (0); /* * If this relocation is against a segment that does not provide write * access, set the write permission for all non-writable mappings. */ if (((mpp->mr_prot & PROT_WRITE) == 0) && textrel && ((set_prot(lmp, mpp, 1) == 0) || (aplist_append(textrel, mpp, AL_CNT_TEXTREL) == NULL))) return (0); /* * Perform the actual relocation. Note, for backward compatibility, * SPARC relocations are added to the offset contents (there was a time * when the offset was used to contain the addend, rather than using * the addend itself). */ #if defined(__sparc) *((ulong_t *)roffset) += base + ((M_RELOC *)rbgn)->r_addend; #elif defined(__amd64) *((ulong_t *)roffset) = base + ((M_RELOC *)rbgn)->r_addend; #else *((ulong_t *)roffset) += base; #endif return (1); } /* * When a generic relocation loop realizes that it's dealing with relative * relocations, but no DT_RELCOUNT .dynamic tag is present, this tighter loop * is entered as an optimization. */ ulong_t elf_reloc_relative(ulong_t rbgn, ulong_t rend, ulong_t rsize, ulong_t base, Rt_map *lmp, APlist **textrel) { char rtype; do { if (_elf_reloc_relative(rbgn, base, lmp, textrel) == 0) break; rbgn += rsize; if (rbgn >= rend) break; /* * Make sure the next type is a relative relocation. */ rtype = ELF_R_TYPE(((M_RELOC *)rbgn)->r_info, M_MACH); } while (rtype == M_R_RELATIVE); return (rbgn); } /* * This is the tightest loop for RELATIVE relocations for those objects built * with the DT_RELACOUNT .dynamic entry. */ ulong_t elf_reloc_relative_count(ulong_t rbgn, ulong_t rcount, ulong_t rsize, ulong_t base, Rt_map *lmp, APlist **textrel) { for (; rcount; rcount--) { if (_elf_reloc_relative(rbgn, base, lmp, textrel) == 0) break; rbgn += rsize; } return (rbgn); }