/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 1993, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright 2012 Milan Jurik. All rights reserved. */ /* * This file contains functions that implement the command menu commands. */ #include "global.h" #include #include #include #include #include #include #include #include #if defined(sparc) #include #endif /* defined(sparc) */ #include "main.h" #include "analyze.h" #include "menu.h" #include "menu_command.h" #include "menu_defect.h" #include "menu_partition.h" #include "param.h" #include "misc.h" #include "label.h" #include "startup.h" #include "partition.h" #include "prompts.h" #include "checkdev.h" #include "io.h" #include "ctlr_scsi.h" #include "auto_sense.h" #include "modify_partition.h" extern struct menu_item menu_partition[]; extern struct menu_item menu_analyze[]; extern struct menu_item menu_defect[]; /* * Choices for the p_tag vtoc field */ slist_t ptag_choices[] = { { "unassigned", "", V_UNASSIGNED }, { "boot", "", V_BOOT }, { "root", "", V_ROOT }, { "swap", "", V_SWAP }, { "usr", "", V_USR }, { "backup", "", V_BACKUP }, { "stand", "", V_STAND }, { "var", "", V_VAR }, { "home", "", V_HOME }, { "alternates", "", V_ALTSCTR }, { "reserved", "", V_RESERVED }, { NULL } }; /* * Choices for the p_flag vtoc field */ slist_t pflag_choices[] = { { "wm", "read-write, mountable", 0 }, { "wu", "read-write, unmountable", V_UNMNT }, { "rm", "read-only, mountable", V_RONLY }, { "ru", "read-only, unmountable", V_RONLY|V_UNMNT }, { NULL } }; /* * This routine implements the 'disk' command. It allows the user to * select a disk to be current. The list of choices is the list of * disks that were found at startup time. */ int c_disk() { struct disk_info *disk; u_ioparam_t ioparam; int i; int ndisks = 0; int blind_select = 0; int deflt; int index; int *defltptr = NULL; int more = 0; int more_quit = 0; int one_line = 0; int tty_lines; /* * This buffer holds the check() prompt that verifies we've got the right * disk when performing a blind selection. The size should be sufficient * to hold the prompt string, plus 256 characters for the disk name - * way more than should ever be necessary. See the #define in misc.h. */ char chk_buf[BLIND_SELECT_VER_PROMPT]; if (istokenpresent()) { /* * disk number to be selected is already in the * input stream . */ TOKEN token, cleantoken; /* * Get the disk number the user has given. */ i = 0; for (disk = disk_list; disk != NULL; disk = disk->disk_next) { i++; } ioparam.io_bounds.lower = 0; ioparam.io_bounds.upper = i - 1; (void) gettoken(token); clean_token(cleantoken, token); /* * Convert the token into an integer. */ if (geti(cleantoken, &index, (int *)NULL)) return (0); /* * Check to be sure it is within the legal bounds. */ if ((index < 0) || (index >= i)) { err_print("`%d' is out of range.\n", index); return (0); } goto checkdisk; } fmt_print("\n\nAVAILABLE DISK SELECTIONS:\n"); i = 0; if ((option_f == (char *)NULL) && isatty(0) == 1 && isatty(1) == 1) { /* * We have a real terminal for std input and output, enable * more style of output for disk selection list. */ more = 1; tty_lines = get_tty_lines(); enter_critical(); echo_off(); charmode_on(); exit_critical(); } /* * Loop through the list of found disks. */ for (disk = disk_list; disk != NULL; disk = disk->disk_next) { /* * If using more output, account 2 lines for each disk. */ if (more && !more_quit && i && (one_line || ((2 * i + 1) % (tty_lines - 2) <= 1))) { int c; /* * Get the next character. */ fmt_print("- hit space for more or s to select - "); c = getchar(); fmt_print("\015"); one_line = 0; /* * Handle display one line command * (return key) */ if (c == '\012') { one_line++; } /* Handle Quit command */ if (c == 'q') { fmt_print( " \015"); more_quit++; } /* Handle ^D command */ if (c == '\004') fullabort(); /* or get on with the show */ if (c == 's' || c == 'S') { fmt_print("%80s\n", " "); break; } } /* * If this is the current disk, mark it as * the default. */ if (cur_disk == disk) { deflt = i; defltptr = &deflt; } if (!more || !more_quit) pr_diskline(disk, i); i++; } if (more) { enter_critical(); charmode_off(); echo_on(); exit_critical(); } /* * Determine total number of disks, and ask the user which disk he * would like to make current. */ for (disk = disk_list; disk != NULL; disk = disk->disk_next) { ndisks++; } ioparam.io_bounds.lower = 0; ioparam.io_bounds.upper = ndisks - 1; index = input(FIO_INT, "Specify disk (enter its number)", ':', &ioparam, defltptr, DATA_INPUT); if (index >= i) { blind_select = 1; } /* * Find the disk chosen. Search through controllers/disks * in the same original order, so we match what the user * chose. */ checkdisk: i = 0; for (disk = disk_list; disk != NULL; disk = disk->disk_next) { if (i == index) goto found; i++; } /* * Should never happen. */ impossible("no disk found"); found: if (blind_select) { (void) snprintf(chk_buf, sizeof (chk_buf), "Disk %s selected - is this the desired disk? ", disk->disk_name); if (check(chk_buf)) { return (-1); } } /* * Update the state. We lock out interrupts so the state can't * get half-updated. */ enter_critical(); init_globals(disk); exit_critical(); /* * If type unknown and interactive, ask user to specify type. * Also, set partition table (best guess) too. */ if (!option_f && ncyl == 0 && nhead == 0 && nsect == 0 && (disk->label_type != L_TYPE_EFI)) { (void) c_type(); } /* * Get the Solaris Fdisk Partition information */ if (nhead != 0 && nsect != 0) (void) copy_solaris_part(&cur_disk->fdisk_part); if ((cur_disk->label_type == L_TYPE_EFI) && (cur_disk->disk_parts->etoc->efi_flags & EFI_GPT_PRIMARY_CORRUPT)) { err_print("Reading the primary EFI GPT label "); err_print("failed. Using backup label.\n"); err_print("Use the 'backup' command to restore "); err_print("the primary label.\n"); } #if defined(_SUNOS_VTOC_16) /* * If there is no fdisk solaris partition. */ if (cur_disk->fdisk_part.numsect == 0) { err_print("No Solaris fdisk partition found.\n"); goto exit; } #endif /* defined(_SUNOS_VTOC_16) */ /* * If the label of the disk is marked dirty, * see if they'd like to label the disk now. */ if (cur_disk->disk_flags & DSK_LABEL_DIRTY) { if (check("Disk not labeled. Label it now") == 0) { if (write_label()) { err_print("Write label failed\n"); } else { cur_disk->disk_flags &= ~DSK_LABEL_DIRTY; } } } exit: return (0); } /* * This routine implements the 'type' command. It allows the user to * specify the type of the current disk. It should be necessary only * if the disk was not labelled or was somehow labelled incorrectly. * The list of legal types for the disk comes from information that was * in the data file. */ int c_type() { struct disk_type *type, *tptr, *oldtype; u_ioparam_t ioparam; int i, index, deflt, *defltptr = NULL; struct disk_type disk_type; struct disk_type *d = &disk_type; int first_disk; int auto_conf_choice; int other_choice; struct dk_label label; struct efi_info efi_info; uint64_t maxLBA; char volname[LEN_DKL_VVOL]; int volinit = 0; /* * There must be a current disk. */ if (cur_disk == NULL) { err_print("Current Disk is not set.\n"); return (-1); } oldtype = cur_disk->disk_type; type = cur_ctype->ctype_dlist; /* * Print out the list of choices. */ fmt_print("\n\nAVAILABLE DRIVE TYPES:\n"); first_disk = 0; if (cur_ctype->ctype_ctype == DKC_SCSI_CCS) { auto_conf_choice = 0; fmt_print(" %d. Auto configure\n", first_disk++); } else { auto_conf_choice = -1; } i = first_disk; for (tptr = type; tptr != NULL; tptr = tptr->dtype_next) { /* * If we pass the current type, mark it to be the default. */ if (cur_dtype == tptr) { deflt = i; defltptr = &deflt; } if (cur_disk->label_type == L_TYPE_EFI) { continue; } if (tptr->dtype_asciilabel) fmt_print(" %d. %s\n", i++, tptr->dtype_asciilabel); } other_choice = i; fmt_print(" %d. other\n", i); ioparam.io_bounds.lower = 0; ioparam.io_bounds.upper = i; /* * Ask the user which type the disk is. */ index = input(FIO_INT, "Specify disk type (enter its number)", ':', &ioparam, defltptr, DATA_INPUT); /* * Find the type s/he chose. */ if (index == auto_conf_choice) { float scaled; diskaddr_t nblks; int nparts; /* * User chose "auto configure". */ (void) strcpy(x86_devname, cur_disk->disk_name); switch (cur_disk->label_type) { case L_TYPE_SOLARIS: if ((tptr = auto_sense(cur_file, 1, &label)) == NULL) { err_print("Auto configure failed\n"); return (-1); } fmt_print("%s: configured with capacity of ", cur_disk->disk_name); nblks = (diskaddr_t)tptr->dtype_ncyl * tptr->dtype_nhead * tptr->dtype_nsect; scaled = bn2mb(nblks); if (scaled > 1024.0) { fmt_print("%1.2fGB\n", scaled/1024.0); } else { fmt_print("%1.2fMB\n", scaled); } fmt_print("<%s cyl %d alt %d hd %d sec %d>\n", tptr->dtype_asciilabel, tptr->dtype_ncyl, tptr->dtype_acyl, tptr->dtype_nhead, tptr->dtype_nsect); break; case L_TYPE_EFI: if ((tptr = auto_efi_sense(cur_file, &efi_info)) == NULL) { err_print("Auto configure failed\n"); return (-1); } fmt_print("%s: configured with capacity of ", cur_disk->disk_name); scaled = bn2mb(efi_info.capacity); if (scaled > 1024.0) { fmt_print("%1.2fGB\n", scaled/1024.0); } else { fmt_print("%1.2fMB\n", scaled); } cur_blksz = efi_info.e_parts->efi_lbasize; print_efi_string(efi_info.vendor, efi_info.product, efi_info.revision, efi_info.capacity); fmt_print("\n"); for (nparts = 0; nparts < cur_parts->etoc->efi_nparts; nparts++) { if (cur_parts->etoc->efi_parts[nparts].p_tag == V_RESERVED) { if (cur_parts->etoc->efi_parts[nparts]. p_name) { (void) strcpy(volname, cur_parts->etoc->efi_parts [nparts].p_name); volinit = 1; } break; } } enter_critical(); if (delete_disk_type(cur_disk->disk_type) != 0) { fmt_print("Autoconfiguration failed.\n"); return (-1); } cur_disk->disk_type = tptr; cur_disk->disk_parts = tptr->dtype_plist; init_globals(cur_disk); exit_critical(); if (volinit) { for (nparts = 0; nparts < cur_parts->etoc->efi_nparts; nparts++) { if (cur_parts->etoc->efi_parts[nparts].p_tag == V_RESERVED) { (void) strcpy( cur_parts->etoc->efi_parts[nparts].p_name, volname); (void) strlcpy(cur_disk->v_volume, volname, LEN_DKL_VVOL); break; } } } return (0); default: /* Should never happen */ return (-1); } } else if ((index == other_choice) && (cur_label == L_TYPE_SOLARIS)) { /* * User chose "other". * Get the standard information on the new type. * Put all information in a tmp structure, in * case user aborts. */ bzero((char *)d, sizeof (struct disk_type)); d->dtype_ncyl = get_ncyl(); d->dtype_acyl = get_acyl(d->dtype_ncyl); d->dtype_pcyl = get_pcyl(d->dtype_ncyl, d->dtype_acyl); d->dtype_nhead = get_nhead(); d->dtype_phead = get_phead(d->dtype_nhead, &d->dtype_options); d->dtype_nsect = get_nsect(); d->dtype_psect = get_psect(&d->dtype_options); d->dtype_bpt = get_bpt(d->dtype_nsect, &d->dtype_options); d->dtype_rpm = get_rpm(); d->dtype_fmt_time = get_fmt_time(&d->dtype_options); d->dtype_cyl_skew = get_cyl_skew(&d->dtype_options); d->dtype_trk_skew = get_trk_skew(&d->dtype_options); d->dtype_trks_zone = get_trks_zone(&d->dtype_options); d->dtype_atrks = get_atrks(&d->dtype_options); d->dtype_asect = get_asect(&d->dtype_options); d->dtype_cache = get_cache(&d->dtype_options); d->dtype_threshold = get_threshold(&d->dtype_options); d->dtype_prefetch_min = get_min_prefetch(&d->dtype_options); d->dtype_prefetch_max = get_max_prefetch(d->dtype_prefetch_min, &d->dtype_options); d->dtype_bps = get_bps(); #if defined(sparc) d->dtype_dr_type = 0; #endif /* defined(sparc) */ d->dtype_asciilabel = get_asciilabel(); /* * Add the new type to the list of possible types for * this controller. We lock out interrupts so the lists * can't get munged. We put off actually allocating the * structure till here in case the user wanted to * interrupt while still inputting information. */ enter_critical(); tptr = (struct disk_type *)zalloc(sizeof (struct disk_type)); if (type == NULL) cur_ctype->ctype_dlist = tptr; else { while (type->dtype_next != NULL) type = type->dtype_next; type->dtype_next = tptr; } bcopy((char *)d, (char *)tptr, sizeof (disk_type)); tptr->dtype_next = NULL; /* * the new disk type does not have any defined * partition table . Hence copy the current partition * table if possible else create a default * paritition table. */ new_partitiontable(tptr, oldtype); } else if ((index == other_choice) && (cur_label == L_TYPE_EFI)) { maxLBA = get_mlba(); cur_parts->etoc->efi_last_lba = maxLBA; cur_parts->etoc->efi_last_u_lba = maxLBA - 34; for (i = 0; i < cur_parts->etoc->efi_nparts; i++) { cur_parts->etoc->efi_parts[i].p_start = 0; cur_parts->etoc->efi_parts[i].p_size = 0; cur_parts->etoc->efi_parts[i].p_tag = V_UNASSIGNED; } cur_parts->etoc->efi_parts[8].p_start = maxLBA - 34 - (1024 * 16); cur_parts->etoc->efi_parts[8].p_size = (1024 * 16); cur_parts->etoc->efi_parts[8].p_tag = V_RESERVED; if (write_label()) { err_print("Write label failed\n"); } else { cur_disk->disk_flags &= ~DSK_LABEL_DIRTY; } return (0); } else { /* * User picked an existing disk type. */ i = first_disk; tptr = type; while (i < index) { if (tptr->dtype_asciilabel) { i++; } tptr = tptr->dtype_next; } if ((tptr->dtype_asciilabel == NULL) && (tptr->dtype_next != NULL)) { while (tptr->dtype_asciilabel == NULL) { tptr = tptr->dtype_next; } } } /* * Check for mounted file systems in the format zone. * One potential problem with this would be that check() * always returns 'yes' when running out of a file. However, * it is actually ok because we don't let the program get * started if there are mounted file systems and we are * running from a file. */ if ((tptr != oldtype) && checkmount((diskaddr_t)-1, (diskaddr_t)-1)) { err_print( "Cannot set disk type while it has mounted " "partitions.\n\n"); return (-1); } /* * check for partitions being used for swapping in format zone */ if ((tptr != oldtype) && checkswap((diskaddr_t)-1, (diskaddr_t)-1)) { err_print("Cannot set disk type while its partition are " "currently being used for swapping.\n"); return (-1); } /* * Check for partitions being used in SVM, VxVM or LU devices */ if ((tptr != oldtype) && checkdevinuse(cur_disk->disk_name, (diskaddr_t)-1, (diskaddr_t)-1, 0, 0)) { err_print("Cannot set disk type while its " "partitions are currently in use.\n"); return (-1); } /* * If the type selected is different from the previous type, * mark the disk as not labelled and reload the current * partition info. This is not essential but probably the * right thing to do, since the size of the disk has probably * changed. */ enter_critical(); if (tptr != oldtype) { cur_disk->disk_type = tptr; cur_disk->disk_parts = NULL; cur_disk->disk_flags &= ~DSK_LABEL; } /* * Initialize the state of the current disk. */ init_globals(cur_disk); (void) get_partition(); exit_critical(); /* * If the label of the disk is marked dirty, * see if they'd like to label the disk now. */ if (cur_disk->disk_flags & DSK_LABEL_DIRTY) { if (check("Disk not labeled. Label it now") == 0) { if (write_label()) { err_print("Write label failed\n"); } else { cur_disk->disk_flags &= ~DSK_LABEL_DIRTY; } } } return (0); } /* * This routine implements the 'partition' command. It simply runs * the partition menu. */ int c_partition() { /* * There must be a current disk type and a current disk */ if (cur_dtype == NULL) { err_print("Current Disk Type is not set.\n"); return (-1); } /* * Check for a valid fdisk table entry for Solaris */ if (!good_fdisk()) { return (-1); } cur_menu++; last_menu = cur_menu; #ifdef not /* * If there is no current partition table, make one. This is * so the commands within the menu never have to check for * a non-existent table. */ if (cur_parts == NULL) err_print("making partition.\n"); make_partition(); #endif /* not */ /* * Run the menu. */ run_menu(menu_partition, "PARTITION", "partition", 0); cur_menu--; return (0); } /* * This routine implements the 'current' command. It describes the * current disk. */ int c_current() { /* * If there is no current disk, say so. Note that this is * not an error since it is a legitimate response to the inquiry. */ if (cur_disk == NULL) { fmt_print("No Current Disk.\n"); return (0); } /* * Print out the info we have on the current disk. */ fmt_print("Current Disk = %s", cur_disk->disk_name); if (chk_volname(cur_disk)) { fmt_print(": "); print_volname(cur_disk); } fmt_print("\n"); if (cur_disk->devfs_name != NULL) { if (cur_dtype == NULL) { fmt_print("\n"); } else if (cur_label == L_TYPE_SOLARIS) { fmt_print("<%s cyl %d alt %d hd %d sec %d>\n", cur_dtype->dtype_asciilabel, ncyl, acyl, nhead, nsect); } else if (cur_label == L_TYPE_EFI) { print_efi_string(cur_dtype->vendor, cur_dtype->product, cur_dtype->revision, cur_dtype->capacity); fmt_print("\n"); } fmt_print("%s\n", cur_disk->devfs_name); } else { fmt_print("%s%d: <", cur_ctlr->ctlr_dname, cur_disk->disk_dkinfo.dki_unit); if (cur_dtype == NULL) { fmt_print("type unknown"); } else if (cur_label == L_TYPE_SOLARIS) { fmt_print("%s cyl %d alt %d hd %d sec %d", cur_dtype->dtype_asciilabel, ncyl, acyl, nhead, nsect); } else if (cur_label == L_TYPE_EFI) { print_efi_string(cur_dtype->vendor, cur_dtype->product, cur_dtype->revision, cur_dtype->capacity); fmt_print("\n"); } fmt_print(">\n"); } fmt_print("\n"); return (0); } /* * This routine implements the 'format' command. It allows the user * to format and verify any portion of the disk. */ int c_format() { diskaddr_t start, end; time_t clock; int format_time, format_tracks, format_cyls; int format_interval; diskaddr_t deflt; int status; u_ioparam_t ioparam; struct scsi_inquiry *inq; char rawbuf[MAX_MODE_SENSE_SIZE]; struct scsi_capacity_16 capacity; struct vpd_hdr *vpdhdr; uint8_t protect; uint8_t pagecode; uint8_t spt; uint8_t p_type; uint8_t prot_flag[NUM_PROT_TYPE] = {1, 0, 0, 0}; int i; char *prot_descriptor[NUM_PROT_TYPE] = { "Protection Information is disabled.", "Protection Information is enabled.", "Protection Information is enabled.", "Protection Information is enabled.", }; /* * There must be a current disk type and a current disk */ if (cur_dtype == NULL) { err_print("Current Disk Type is not set.\n"); return (-1); } /* * There must be a format routine in cur_ops structure to have * this routine work. */ if (cur_ops->op_format == NULL) { err_print( "Cannot format this drive. Please use your Manufacturer supplied formatting " "utility.\n"); return (-1); } /* * There must be a current defect list. Except for * unformatted SCSI disks. For them the defect list * can only be retrieved after formatting the disk. */ if ((cur_ctype->ctype_flags & CF_SCSI) && !EMBEDDED_SCSI && (cur_ctype->ctype_flags & CF_DEFECTS) && ! (cur_flags & DISK_FORMATTED)) { cur_list.flags |= LIST_RELOAD; } else if (cur_list.list == NULL && !EMBEDDED_SCSI) { err_print("Current Defect List must be initialized.\n"); return (-1); } /* * Ask for the bounds of the format. We always use the whole * disk as the default, since that is the most likely case. * Note, for disks which must be formatted accross the whole disk, * don't bother the user. */ ioparam.io_bounds.lower = start = 0; if (cur_label == L_TYPE_SOLARIS) { if (cur_ctype->ctype_flags & CF_SCSI) { ioparam.io_bounds.upper = end = datasects() - 1; } else { ioparam.io_bounds.upper = end = physsects() - 1; } } else { ioparam.io_bounds.upper = end = cur_parts->etoc->efi_last_lba; } if (! (cur_ctlr->ctlr_flags & DKI_FMTVOL)) { deflt = ioparam.io_bounds.lower; start = input(FIO_BN, "Enter starting block number", ':', &ioparam, (int *)&deflt, DATA_INPUT); ioparam.io_bounds.lower = start; deflt = ioparam.io_bounds.upper; end = input(FIO_BN, "Enter ending block number", ':', &ioparam, (int *)&deflt, DATA_INPUT); } /* * Some disks can format tracks. Make sure the whole track is * specified for them. */ if (cur_ctlr->ctlr_flags & DKI_FMTTRK) { if (bn2s(start) != 0 || bn2s(end) != sectors(bn2h(end)) - 1) { err_print("Controller requires formatting of "); err_print("entire tracks.\n"); return (-1); } } /* * Check for mounted file systems in the format zone, and if we * find any, make sure they are really serious. One potential * problem with this would be that check() always returns 'yes' * when running out of a file. However, it is actually ok * because we don't let the program get started if there are * mounted file systems and we are running from a file. */ if (checkmount(start, end)) { err_print( "Cannot format disk while it has mounted partitions.\n\n"); return (-1); } /* * check for partitions being used for swapping in format zone */ if (checkswap(start, end)) { err_print("Cannot format disk while its partition are \ currently being used for swapping.\n"); return (-1); } /* * Check for partitions being used in SVM, VxVM or LU devices * in this format zone */ if (checkdevinuse(cur_disk->disk_name, start, end, 0, 0)) { err_print("Cannot format disk while its partitions " "are currently in use.\n"); return (-1); } if (cur_disk->disk_lbasize != DEV_BSIZE) { fmt_print("Current disk sector size is %d Byte, format\n" "will change the sector size to 512 Byte. ", cur_disk->disk_lbasize); if (check("Continue")) { return (-1); } } /* * set the default protection type */ prot_type = PROT_TYPE_0; /* * Check if the protect information of this disk is enabled */ if (uscsi_inquiry(cur_file, rawbuf, sizeof (rawbuf))) { err_print("Inquiry failed\n"); return (-1); } inq = (struct scsi_inquiry *)rawbuf; protect = inq->inq_protect; if (protect == 0) { fmt_print("The protection information is not enabled\n"); fmt_print( "The disk will be formatted with protection type 0\n"); } else { (void) memset(rawbuf, 0, MAX_MODE_SENSE_SIZE); if (uscsi_inquiry_page_86h(cur_file, rawbuf, sizeof (rawbuf))) { err_print("Inquiry with page 86h failed\n"); return (-1); } vpdhdr = (struct vpd_hdr *)rawbuf; pagecode = vpdhdr->page_code; if (pagecode != 0x86) { err_print("Inquiry with page 86h failed\n"); return (-1); } spt = (rawbuf[4] << 2) >> 5; fmt_print("This disk can support protection types:\n"); switch (spt) { case 0: prot_flag[1] = 1; break; case 1: prot_flag[1] = 1; prot_flag[2] = 1; break; case 2: prot_flag[2] = 1; break; case 3: prot_flag[1] = 1; prot_flag[3] = 1; break; case 4: prot_flag[3] = 1; break; case 5: prot_flag[2] = 1; prot_flag[3] = 1; break; case 7: prot_flag[1] = 1; prot_flag[2] = 1; prot_flag[3] = 1; break; default: err_print( "Invalid supported protection types\n"); return (-1); } for (i = 0; i < NUM_PROT_TYPE; i++) { if (prot_flag[i] == 1) { fmt_print("[%d] TYPE_%d : ", i, i); fmt_print("%s\n", prot_descriptor[i]); } } /* * Get the current protection type */ if (uscsi_read_capacity_16(cur_file, &capacity)) { err_print("Read capacity_16 failed\n"); return (-1); } p_type = get_cur_protection_type(&capacity); fmt_print("\nThe disk is currently formatted with TYPE_%d.\n", p_type); /* * Ask user what protection type to use */ ioparam.io_bounds.lower = PROT_TYPE_0; ioparam.io_bounds.upper = PROT_TYPE_3; prot_type = input(FIO_INT, "Specify the New Protection Type", ':', &ioparam, NULL, DATA_INPUT); /* * if get a unsupported protection type, then use the * current type: p_type. */ if (prot_flag[prot_type] == 0) { fmt_print("Unsupported protection type.\n"); prot_type = p_type; } fmt_print("The disk will be formatted to type %d\n", prot_type); } if (SCSI && (format_time = scsi_format_time()) > 0) { fmt_print( "\nReady to format. Formatting cannot be interrupted\n" "and takes %d minutes (estimated). ", format_time); } else if (cur_dtype->dtype_options & SUP_FMTTIME) { /* * Formatting time is (2 * time of 1 spin * number of * tracks) + (step rate * number of cylinders) rounded * up to the nearest minute. Note, a 10% fudge factor * is thrown in for insurance. */ if (cur_dtype->dtype_fmt_time == 0) cur_dtype->dtype_fmt_time = 2; format_tracks = ((end-start) / cur_dtype->dtype_nsect) + 1; format_cyls = format_tracks / cur_dtype->dtype_nhead; format_tracks = format_tracks * cur_dtype->dtype_fmt_time; /* * ms. */ format_time = ((60000 / cur_dtype->dtype_rpm) +1) * format_tracks + format_cyls * 7; /* * 20% done tick (sec) */ format_interval = format_time / 5000; /* * min. */ format_time = (format_time + 59999) / 60000; /* * Check format time values and make adjustments * to prevent sleeping too long (forever?) or * too short. */ if (format_time <= 1) { /* * Format time is less than 1 min.. */ format_time = 1; } if (format_interval < 11) { /* Format time is less than 1 minute. */ if (format_interval < 2) format_interval = 2; /* failsafe */ format_interval = 10; } else { /* Format time is greater than 1 minute. */ format_interval -= 10; } fmt_print( "Ready to format. Formatting cannot be interrupted\n" "and takes %d minutes (estimated). ", format_time); } else { fmt_print( "Ready to format. Formatting cannot be interrupted.\n"); } if (check("Continue")) { return (-1); } /* * Print the time so that the user will know when format started. * Lock out interrupts. This could be a problem, since it could * cause the user to sit for quite awhile with no control, but we * don't have any other good way of keeping his gun from going off. */ clock = time((time_t *)0); fmt_print("Beginning format. The current time is %s\n", ctime(&clock)); enter_critical(); /* * Mark the defect list dirty so it will be rewritten when we are * done. It is possible to qualify this so it doesn't always * get rewritten, but it's not worth the trouble. * Note: no defect lists for embedded scsi drives. */ if (!EMBEDDED_SCSI) { cur_list.flags |= LIST_DIRTY; } /* * If we are formatting over any of the labels, mark the label * dirty so it will be rewritten. */ if (cur_disk->label_type == L_TYPE_SOLARIS) { if (start < totalsects() && end >= datasects()) { if (cur_disk->disk_flags & DSK_LABEL) cur_flags |= LABEL_DIRTY; } } else if (cur_disk->label_type == L_TYPE_EFI) { if (start < 34) { if (cur_disk->disk_flags & DSK_LABEL) cur_flags |= LABEL_DIRTY; } } if (start == 0) { cur_flags |= LABEL_DIRTY; } /* * Do the format. bugid 1009138 removed the use of fork to * background the format and print a tick. */ status = (*cur_ops->op_format)(start, end, &cur_list); if (status) { exit_critical(); err_print("failed\n"); return (-1); } fmt_print("done\n"); if (option_msg && diag_msg) { clock = time((time_t *)0); fmt_print("The current time is %s\n", ctime(&clock)); } cur_flags |= DISK_FORMATTED; /* * If the defect list or label is dirty, write them out again. * Note, for SCSI we have to wait til now to load defect list * since we can't access it until after formatting a virgin disk. */ /* enter_critical(); */ if (cur_list.flags & LIST_RELOAD) { assert(!EMBEDDED_SCSI); if (*cur_ops->op_ex_man == NULL || (*cur_ops->op_ex_man)(&cur_list)) { err_print("Warning: unable to reload defect list\n"); cur_list.flags &= ~LIST_DIRTY; return (-1); } cur_list.flags |= LIST_DIRTY; } if (cur_list.flags & LIST_DIRTY) { assert(!EMBEDDED_SCSI); write_deflist(&cur_list); cur_list.flags = 0; } if (cur_flags & LABEL_DIRTY) { (void) write_label(); cur_flags &= ~LABEL_DIRTY; } /* * Come up for air, since the verify step does not need to * be atomic (it does it's own lockouts when necessary). */ exit_critical(); /* * If we are supposed to verify, we do the 'write' test over * the format zone. The rest of the analysis parameters are * left the way they were. */ if (scan_auto) { scan_entire = 0; scan_lower = start; scan_upper = end; fmt_print("\nVerifying media..."); status = do_scan(SCAN_PATTERN, F_SILENT); } /* * If the defect list or label is dirty, write them out again. */ if (cur_list.flags & LIST_DIRTY) { assert(!EMBEDDED_SCSI); cur_list.flags = 0; write_deflist(&cur_list); } if (cur_flags & LABEL_DIRTY) { cur_flags &= ~LABEL_DIRTY; (void) write_label(); } return (status); } /* * This routine implements the 'repair' command. It allows the user * to reallocate sectors on the disk that have gone bad. */ int c_repair() { diskaddr_t bn; int status; u_ioparam_t ioparam; char *buf; int buf_is_good; int block_has_error; int i; /* * There must be a current disk type (and therefore a current disk). */ if (cur_dtype == NULL) { err_print("Current Disk Type is not set.\n"); return (-1); } /* * The current disk must be formatted for repair to work. */ if (!(cur_flags & DISK_FORMATTED)) { err_print("Current Disk is unformatted.\n"); return (-1); } /* * Check for a valid fdisk table entry for Solaris */ if (!good_fdisk()) { return (-1); } /* * Repair is an optional command for controllers, so it may * not be supported. */ if (cur_ops->op_repair == NULL) { err_print("Controller does not support repairing.\n"); err_print("or disk supports automatic defect management.\n"); return (-1); } /* * There must be a defect list for non-embedded scsi devices, * since we will add to it. */ if (!EMBEDDED_SCSI && cur_list.list == NULL) { err_print("Current Defect List must be initialized.\n"); return (-1); } /* * Ask the user which sector has gone bad. */ ioparam.io_bounds.lower = 0; if (cur_disk->label_type == L_TYPE_SOLARIS) { ioparam.io_bounds.upper = physsects() - 1; } else { ioparam.io_bounds.upper = cur_parts->etoc->efi_last_lba; } bn = input(FIO_BN, "Enter absolute block number of defect", ':', &ioparam, (int *)NULL, DATA_INPUT); /* * Check to see if there is a mounted file system over the * specified sector. If there is, make sure the user is * really serious. */ if (checkmount(bn, bn)) { if (check("Repair is in a mounted partition, continue")) return (-1); } /* * check for partitions being used for swapping in format zone */ if (checkswap(bn, bn)) { if (check("Repair is in a partition which is currently \ being used for swapping.\ncontinue")) return (-1); } if (checkdevinuse(cur_disk->disk_name, bn, bn, 0, 0)) { if (check("Repair is in a partition which is currently " "in use.\ncontinue")) return (-1); } buf = zalloc((cur_disk->disk_lbasize == 0) ? SECSIZE : cur_disk->disk_lbasize); /* * Try to read the sector before repairing it. If we can * get good data out of it, we can write that data back * after the repair. If the sector looks ok, ask the * user to confirm the repair, since it doesn't appear * necessary. Try reading the block several times to * see if we can read it consistently. * * First, let's see if the block appears to have problems... */ block_has_error = 1; for (i = 0; i < 5; i++) { status = (*cur_ops->op_rdwr)(DIR_READ, cur_file, bn, 1, buf, (F_SILENT | F_ALLERRS), NULL); if (status) break; /* one of the tries failed */ } if (status == 0) { block_has_error = 0; if (check("\ This block doesn't appear to be bad. Repair it anyway")) { free(buf); return (0); } } /* * Last chance... */ if (check("Ready to repair defect, continue")) { free(buf); return (-1); } /* * We're committed to repairing it. Try to get any good * data out of the block if possible. Note that we do * not set the F_ALLERRS flag. */ buf_is_good = 0; for (i = 0; i < 5; i++) { status = (*cur_ops->op_rdwr)(DIR_READ, cur_file, bn, 1, buf, F_SILENT, NULL); if (status == 0) { buf_is_good = 1; break; } } /* * Lock out interrupts so the disk can't get out of sync with * the defect list. */ enter_critical(); fmt_print("Repairing "); if (block_has_error) { fmt_print("%s error on ", buf_is_good ? "soft" : "hard"); } fmt_print("block %llu (", bn); pr_dblock(fmt_print, bn); fmt_print(")..."); /* * Do the repair. */ status = (*cur_ops->op_repair)(bn, F_NORMAL); if (status) { fmt_print("failed.\n\n"); } else { /* * The repair worked. Write the old data to the new * block if we were able to read it, otherwise * zero out the new block. If it looks like the * new block is bad, let the user know that, too. * Should we attempt auto-repair in this case? */ fmt_print("ok.\n"); if (!buf_is_good) { bzero(buf, cur_disk->disk_lbasize); } status = (*cur_ops->op_rdwr)(DIR_WRITE, cur_file, bn, 1, buf, (F_SILENT | F_ALLERRS), NULL); if (status == 0) { status = (*cur_ops->op_rdwr)(DIR_READ, cur_file, bn, 1, buf, (F_SILENT | F_ALLERRS), NULL); } if (status) { fmt_print("The new block %llu (", bn); pr_dblock(fmt_print, bn); fmt_print(") also appears defective.\n"); } fmt_print("\n"); /* * Add the bad sector to the defect list, write out * the defect list, and kill off the working list so * it will get synced up with the current defect list * next time we need it. * * For embedded scsi, we don't require a defect list. * However, if we have one, add the defect if the * list includes the grown list. If not, kill it * to force a resync if we need the list later. */ if (EMBEDDED_SCSI) { if (cur_list.list != NULL) { if (cur_list.flags & LIST_PGLIST) { add_ldef(bn, &cur_list); } else { kill_deflist(&cur_list); } } } else if (cur_ctype->ctype_flags & CF_WLIST) { kill_deflist(&cur_list); if (*cur_ops->op_ex_cur != NULL) { (*cur_ops->op_ex_cur)(&cur_list); fmt_print("Current list updated\n"); } } else { add_ldef(bn, &cur_list); write_deflist(&cur_list); } kill_deflist(&work_list); } exit_critical(); free(buf); /* * Return status. */ return (status); } /* * This routine implements the 'show' command. It translates a disk * block given in any format into decimal, hexadecimal, and * cylinder/head/sector format. */ int c_show() { u_ioparam_t ioparam; diskaddr_t bn; /* * There must be a current disk type, so we will know the geometry. */ if (cur_dtype == NULL) { err_print("Current Disk Type is not set.\n"); return (-1); } /* * Ask the user for a disk block. */ ioparam.io_bounds.lower = 0; if (cur_disk->label_type == L_TYPE_SOLARIS) { ioparam.io_bounds.upper = physsects() - 1; } else { ioparam.io_bounds.upper = cur_parts->etoc->efi_last_lba; } bn = input(FIO_BN, "Enter a disk block", ':', &ioparam, (int *)NULL, DATA_INPUT); /* * Echo it back. */ fmt_print("Disk block = %lld = 0x%llx = (", bn, bn); pr_dblock(fmt_print, bn); fmt_print(")\n\n"); return (0); } /* * This routine implements the 'label' command. It writes the * primary and backup labels onto the current disk. */ int c_label() { int status; int deflt, *defltptr = NULL; /* * There must be a current disk type (and therefore a current disk). */ if (cur_dtype == NULL) { err_print("Current Disk Type is not set.\n"); return (-1); } /* * The current disk must be formatted to label it. */ if (!(cur_flags & DISK_FORMATTED)) { err_print("Current Disk is unformatted.\n"); return (-1); } /* * Check for a valid fdisk table entry for Solaris */ if (!good_fdisk()) { return (-1); } /* * Check to see if there are any mounted file systems anywhere * on the current disk. If so, refuse to label the disk, but * only if the partitions would change for the mounted partitions. * */ if (checkmount((diskaddr_t)-1, (diskaddr_t)-1)) { /* Bleagh, too descriptive */ if (check_label_with_mount()) { err_print("Cannot label disk while it has " "mounted partitions.\n\n"); return (-1); } } /* * check to see if there any partitions being used for swapping * on the current disk. If so, refuse to label the disk, but * only if the partitions would change for the mounted partitions. */ if (checkswap((diskaddr_t)-1, (diskaddr_t)-1)) { if (check_label_with_swap()) { err_print("Cannot label disk while its " "partitions are currently being used for " "swapping.\n"); return (-1); } } /* * Check to see if any partitions used for svm, vxvm or live upgrade * are on the disk. If so, refuse to label the disk, but only * if we are trying to shrink a partition in use. */ if (checkdevinuse(cur_disk->disk_name, (diskaddr_t)-1, (diskaddr_t)-1, 0, 1)) { err_print("Cannot label disk when " "partitions are in use as described.\n"); return (-1); } /* * If there is not a current partition map, warn the user we * are going to use the default. The default is the first * partition map we encountered in the data file. If there is * no default we give up. */ if (cur_parts == NULL) { fmt_print("Current Partition Table is not set, " "using default.\n"); cur_disk->disk_parts = cur_parts = cur_dtype->dtype_plist; if (cur_parts == NULL) { err_print("No default available, cannot label.\n"); return (-1); } } /* * If expert (-e) mode, then ask user if they wish * to change the current solaris label into an EFI one */ if (expert_mode) { #if defined(_SUNOS_VTOC_8) int i; #endif int choice; u_ioparam_t ioparam; struct extvtoc vtoc; struct dk_label label; struct dk_gpt *vtoc64; struct efi_info efinfo; struct disk_type *dptr; /* Ask user what label to use */ fmt_print("[0] SMI Label\n"); fmt_print("[1] EFI Label\n"); ioparam.io_bounds.lower = 0; ioparam.io_bounds.upper = 1; if (cur_label == L_TYPE_SOLARIS) deflt = 0; else deflt = 1; defltptr = &deflt; choice = input(FIO_INT, "Specify Label type", ':', &ioparam, defltptr, DATA_INPUT); if ((choice == 0) && (cur_label == L_TYPE_SOLARIS)) { goto expert_end; } else if ((choice == 1) && (cur_label == L_TYPE_EFI)) { goto expert_end; } switch (choice) { case 0: /* * EFI label to SMI label */ if (cur_dtype->capacity > INFINITY) { fmt_print("Warning: SMI labels only support up to " "2 TB.\n"); } if (cur_disk->fdisk_part.systid == EFI_PMBR) { fmt_print("Warning: This disk has an EFI label. " "Changing to SMI label will erase all\n" "current partitions.\n"); if (check("Continue")) return (-1); #if defined(_FIRMWARE_NEEDS_FDISK) fmt_print("You must use fdisk to delete the current " "EFI partition and create a new\n" "Solaris partition before you can convert the " "label.\n"); return (-1); #endif } #if defined(_FIRMWARE_NEEDS_FDISK) if (!(((cur_disk->fdisk_part.systid != SUNIXOS) || (cur_disk->fdisk_part.systid != SUNIXOS2)) && (cur_disk->fdisk_part.numsect > 0))) { fmt_print("You must use fdisk to create a Solaris " "partition before you can convert the label.\n"); return (-1); } #endif (void) memset((char *)&label, 0, sizeof (struct dk_label)); (void) strcpy(x86_devname, cur_disk->disk_name); if (cur_ctype->ctype_ctype == DKC_DIRECT) dptr = auto_direct_get_geom_label(cur_file, &label); else dptr = auto_sense(cur_file, 1, &label); if (dptr == NULL) { fmt_print("Autoconfiguration failed.\n"); return (-1); } pcyl = label.dkl_pcyl; ncyl = label.dkl_ncyl; acyl = label.dkl_acyl; nhead = label.dkl_nhead; nsect = label.dkl_nsect; if (delete_disk_type(cur_disk->disk_type) == 0) { cur_label = L_TYPE_SOLARIS; cur_disk->label_type = L_TYPE_SOLARIS; cur_disk->disk_type = dptr; cur_disk->disk_parts = dptr->dtype_plist; cur_dtype = dptr; cur_parts = dptr->dtype_plist; if (status = write_label()) err_print("Label failed.\n"); else cur_disk->disk_flags &= ~DSK_LABEL_DIRTY; return (status); } else { err_print("Label failed.\n"); return (-1); } case 1: /* * SMI label to EFI label */ fmt_print("Warning: This disk has an SMI label. Changing to " "EFI label will erase all\ncurrent partitions.\n"); if (check("Continue")) { return (-1); } if (get_disk_info(cur_file, &efinfo) != 0) { return (-1); } (void) memset((char *)&label, 0, sizeof (struct dk_label)); label.dkl_pcyl = pcyl; label.dkl_ncyl = ncyl; label.dkl_acyl = acyl; #if defined(_SUNOS_VTOC_16) label.dkl_bcyl = bcyl; #endif /* defined(_SUNOC_VTOC_16) */ label.dkl_nhead = nhead; label.dkl_nsect = nsect; #if defined(_SUNOS_VTOC_8) for (i = 0; i < NDKMAP; i++) { label.dkl_map[i] = cur_parts->pinfo_map[i]; } #endif /* defined(_SUNOS_VTOC_8) */ label.dkl_magic = DKL_MAGIC; label.dkl_vtoc = cur_parts->vtoc; if (label_to_vtoc(&vtoc, &label) == -1) { return (-1); } if (SMI_vtoc_to_EFI(cur_file, &vtoc64) == -1) { return (-1); } if (efi_write(cur_file, vtoc64) != 0) { err_check(vtoc64); err_print("Warning: error writing EFI.\n"); return (-1); } else { cur_disk->disk_flags &= ~DSK_LABEL_DIRTY; } /* * copy over the EFI vtoc onto the SMI vtoc and return * okay. */ dptr = auto_efi_sense(cur_file, &efinfo); if (dptr == NULL) { fmt_print("Autoconfiguration failed.\n"); return (-1); } cur_label = L_TYPE_EFI; cur_disk->label_type = L_TYPE_EFI; cur_disk->disk_type = dptr; cur_disk->disk_parts = dptr->dtype_plist; cur_dtype = dptr; cur_parts = dptr->dtype_plist; cur_parts->etoc = vtoc64; ncyl = pcyl = nsect = psect = acyl = phead = 0; /* * Get the Solais Fdisk Partition information. */ (void) copy_solaris_part(&cur_disk->fdisk_part); return (0); } } expert_end: /* * Make sure the user is serious. */ if (check("Ready to label disk, continue")) { return (-1); } /* * Write the labels out (this will also notify unix) and * return status. */ fmt_print("\n"); if (status = write_label()) err_print("Label failed.\n"); return (status); } /* * This routine implements the 'analyze' command. It simply runs * the analyze menu. */ int c_analyze() { /* * There must be a current disk type (and therefor a current disk). */ if (cur_dtype == NULL) { err_print("Current Disk Type is not set.\n"); return (-1); } cur_menu++; last_menu = cur_menu; /* * Run the menu. */ run_menu(menu_analyze, "ANALYZE", "analyze", 0); cur_menu--; return (0); } /* * This routine implements the 'defect' command. It simply runs * the defect menu. */ int c_defect() { int i; /* * There must be a current disk type (and therefor a current disk). */ if (cur_dtype == NULL) { err_print("Current Disk Type is not set.\n"); return (-1); } /* * Check for the defect management and list management ops and * display appropriate message. */ if ((cur_ops->op_ex_man == NULL) && (cur_ops->op_ex_cur == NULL) && (cur_ops->op_create == NULL) && (cur_ops->op_wr_cur == NULL)) { err_print("Controller does not support defect management\n"); err_print("or disk supports automatic defect management.\n"); return (-1); } cur_menu++; last_menu = cur_menu; /* * Lock out interrupt while we manipulate the defect lists. */ enter_critical(); /* * If the working list is null but there is a current list, * update the working list to be a copy of the current list. */ if ((work_list.list == NULL) && (cur_list.list != NULL)) { work_list.header = cur_list.header; work_list.list = (struct defect_entry *)zalloc( deflist_size(cur_blksz, work_list.header.count) * cur_blksz); for (i = 0; i < work_list.header.count; i++) *(work_list.list + i) = *(cur_list.list + i); work_list.flags = cur_list.flags & LIST_PGLIST; } exit_critical(); /* * Run the menu. */ run_menu(menu_defect, "DEFECT", "defect", 0); cur_menu--; /* * If the user has modified the working list but not committed * it, warn him that he is probably making a mistake. */ if (work_list.flags & LIST_DIRTY) { if (!EMBEDDED_SCSI) { err_print( "Warning: working defect list modified; but not committed.\n"); if (!check( "Do you wish to commit changes to current defect list")) (void) do_commit(); } } return (0); } /* * This routine implements the 'backup' command. It allows the user * to search for backup labels on the current disk. This is useful * if the primary label was lost and the user wishes to recover the * partition information for the disk. The disk is relabeled and * the current defect list is written out if a backup label is found. */ int c_backup() { struct dk_label label; struct disk_type *dtype; struct partition_info *parts, *plist; diskaddr_t bn; int sec, head, i; char *buf; /* * There must be a current disk type (and therefore a current disk). */ if (cur_dtype == NULL) { err_print("Current Disk Type is not set.\n"); return (-1); } /* * The disk must be formatted to read backup labels. */ if (!(cur_flags & DISK_FORMATTED)) { err_print("Current Disk is unformatted.\n"); return (-1); } /* * Check for a valid fdisk table entry for Solaris */ if (!good_fdisk()) { return (-1); } /* * If we found a primary label on this disk, make sure * the user is serious. */ if (cur_disk->label_type == L_TYPE_EFI) { if (((cur_disk->disk_parts->etoc->efi_flags & EFI_GPT_PRIMARY_CORRUPT) == 0) && check("Disk has a primary label, still continue")) return (-1); fmt_print("Restoring primary label.\n"); if (write_label()) { err_print("Failed\n"); return (-1); } return (0); } else if (((cur_disk->disk_flags & (DSK_LABEL | DSK_LABEL_DIRTY)) == DSK_LABEL) && (check("Disk has a primary label, still continue"))) { return (-1); } buf = zalloc(cur_blksz); fmt_print("Searching for backup labels..."); (void) fflush(stdout); /* * Some disks have the backup labels in a strange place. */ if (cur_ctype->ctype_flags & CF_BLABEL) head = 2; else head = nhead - 1; /* * Loop through each copy of the backup label. */ for (sec = 1; ((sec < BAD_LISTCNT * 2 + 1) && (sec < nsect)); sec += 2) { bn = chs2bn(ncyl + acyl - 1, head, sec) + solaris_offset; /* * Attempt to read it. */ if ((*cur_ops->op_rdwr)(DIR_READ, cur_file, bn, 1, buf, F_NORMAL, NULL)) { continue; } (void *) memcpy((char *)&label, buf, sizeof (struct dk_label)); /* * Verify that it is a reasonable label. */ if (!checklabel(&label)) continue; if (trim_id(label.dkl_asciilabel)) continue; /* * Lock out interrupts while we manipulate lists. */ enter_critical(); fmt_print("found.\n"); /* * Find out which disk type the backup label claims. */ for (dtype = cur_ctype->ctype_dlist; dtype != NULL; dtype = dtype->dtype_next) if (dtype_match(&label, dtype)) break; /* * If it disagrees with our current type, something * real bad is happening. */ if (dtype != cur_dtype) { if (dtype == NULL) { fmt_print("\ Unknown disk type in backup label\n"); exit_critical(); free(buf); return (-1); } fmt_print("Backup label claims different type:\n"); fmt_print(" <%s cyl %d alt %d hd %d sec %d>\n", label.dkl_asciilabel, label.dkl_ncyl, label.dkl_acyl, label.dkl_nhead, label.dkl_nsect); if (check("Continue")) { exit_critical(); free(buf); return (-1); } cur_dtype = dtype; } /* * Try to match the partition map with a known map. */ for (parts = dtype->dtype_plist; parts != NULL; parts = parts->pinfo_next) if (parts_match(&label, parts)) break; /* * If we couldn't match it, allocate space for a new one, * fill in the info, and add it to the list. The name * for the new map is derived from the disk name. */ if (parts == NULL) { parts = (struct partition_info *) zalloc(sizeof (struct partition_info)); plist = dtype->dtype_plist; if (plist == NULL) dtype->dtype_plist = parts; else { while (plist->pinfo_next != NULL) plist = plist->pinfo_next; plist->pinfo_next = parts; } parts->pinfo_name = alloc_string("original"); for (i = 0; i < NDKMAP; i++) #if defined(_SUNOS_VTOC_8) parts->pinfo_map[i] = label.dkl_map[i]; #elif defined(_SUNOS_VTOC_16) parts->pinfo_map[i].dkl_cylno = label.dkl_vtoc.v_part[i].p_start / spc(); parts->pinfo_map[i].dkl_nblk = label.dkl_vtoc.v_part[i].p_size; #else #error No VTOC layout defined. #endif /* defined(_SUNOS_VTOC_8) */ parts->vtoc = label.dkl_vtoc; } /* * We now have a partition map. Make it the current map. */ cur_disk->disk_parts = cur_parts = parts; exit_critical(); /* * Rewrite the labels and defect lists, as appropriate. */ if (EMBEDDED_SCSI) { fmt_print("Restoring primary label.\n"); if (write_label()) { free(buf); return (-1); } } else { fmt_print("Restoring primary label and defect list.\n"); if (write_label()) { free(buf); return (-1); } if (cur_list.list != NULL) write_deflist(&cur_list); } fmt_print("\n"); free(buf); return (0); } /* * If we didn't find any backup labels, say so. */ fmt_print("not found.\n\n"); free(buf); return (0); } /* * This routine is called by c_verify() for an EFI labeled disk */ static int c_verify_efi() { struct efi_info efi_info; struct partition_info tmp_pinfo; int status; status = read_efi_label(cur_file, &efi_info); if (status != 0) { err_print("Warning: Could not read label.\n"); return (-1); } if (cur_parts->etoc->efi_flags & EFI_GPT_PRIMARY_CORRUPT) { err_print("Reading the primary EFI GPT label "); err_print("failed. Using backup label.\n"); err_print("Use the 'backup' command to restore "); err_print("the primary label.\n"); } tmp_pinfo.etoc = efi_info.e_parts; fmt_print("\n"); if (cur_parts->etoc->efi_parts[8].p_name) { fmt_print("Volume name = <%8s>\n", cur_parts->etoc->efi_parts[8].p_name); } else { fmt_print("Volume name = < >\n"); } fmt_print("ascii name = "); print_efi_string(efi_info.vendor, efi_info.product, efi_info.revision, efi_info.capacity); fmt_print("\n"); fmt_print("bytes/sector = %d\n", cur_blksz); fmt_print("sectors = %llu\n", cur_parts->etoc->efi_last_lba); fmt_print("accessible sectors = %llu\n", cur_parts->etoc->efi_last_u_lba); print_map(&tmp_pinfo); return (0); } /* * This routine implements the 'verify' command. It allows the user * to read the labels on the current disk. */ int c_verify() { struct dk_label p_label, b_label, *label; struct partition_info tmp_pinfo; diskaddr_t bn; int sec, head, i, status; int p_label_bad = 0; int b_label_bad = 0; int p_label_found = 0; int b_label_found = 0; char id_str[128]; char *buf; /* * There must be a current disk type (and therefore a current disk). */ if (cur_dtype == NULL) { err_print("Current Disk Type is not set.\n"); return (-1); } /* * The disk must be formatted to read labels. */ if (!(cur_flags & DISK_FORMATTED)) { err_print("Current Disk is unformatted.\n"); return (-1); } /* * Check for a valid fdisk table entry for Solaris */ if (!good_fdisk()) { return (-1); } /* * Branch off here if the disk is EFI labelled. */ if (cur_label == L_TYPE_EFI) { return (c_verify_efi()); } /* * Attempt to read the primary label. */ status = read_label(cur_file, &p_label); if (status == -1) { err_print("Warning: Could not read primary label.\n"); p_label_bad = 1; } else { /* * Verify that it is a reasonable label. */ /* * Save complete ascii string for printing later. */ (void) strncpy(id_str, p_label.dkl_asciilabel, 128); if ((!checklabel((struct dk_label *)&p_label)) || (trim_id(p_label.dkl_asciilabel))) { err_print("\ Warning: Primary label appears to be corrupt.\n"); p_label_bad = 1; } else { p_label_found = 1; /* * Make sure it matches current label */ if ((!dtype_match(&p_label, cur_dtype)) || (!parts_match(&p_label, cur_parts))) { err_print("\ Warning: Primary label on disk appears to be different from\ncurrent label.\n"); p_label_bad = 1; } } } /* * Read backup labels. * Some disks have the backup labels in a strange place. */ if (cur_ctype->ctype_flags & CF_BLABEL) head = 2; else head = nhead - 1; buf = zalloc(cur_blksz); /* * Loop through each copy of the backup label. */ for (sec = 1; ((sec < BAD_LISTCNT * 2 + 1) && (sec < nsect)); sec += 2) { bn = chs2bn(ncyl + acyl - 1, head, sec) + solaris_offset; /* * Attempt to read it. */ if ((*cur_ops->op_rdwr)(DIR_READ, cur_file, bn, 1, buf, F_NORMAL, NULL)) continue; (void *) memcpy((char *)&b_label, buf, sizeof (struct dk_label)); /* * Verify that it is a reasonable label. */ if (!checklabel(&b_label)) continue; /* * Save complete label only if no primary label exists */ if (!p_label_found) (void) strncpy(id_str, b_label.dkl_asciilabel, 128); if (trim_id(b_label.dkl_asciilabel)) continue; b_label_found = 1; /* * Compare against primary label */ if (p_label_found) { if ((strcmp(b_label.dkl_asciilabel, p_label.dkl_asciilabel) != 0) || (b_label.dkl_ncyl != p_label.dkl_ncyl) || (b_label.dkl_acyl != p_label.dkl_acyl) || (b_label.dkl_nhead != p_label.dkl_nhead) || (b_label.dkl_nsect != p_label.dkl_nsect)) { b_label_bad = 1; } else { for (i = 0; i < NDKMAP; i++) { #if defined(_SUNOS_VTOC_8) if ((b_label.dkl_map[i].dkl_cylno != p_label.dkl_map[i].dkl_cylno) || (b_label.dkl_map[i].dkl_nblk != p_label.dkl_map[i].dkl_nblk)) { b_label_bad = 1; break; } #elif defined(_SUNOS_VTOC_16) if ((b_label.dkl_vtoc.v_part[i].p_tag != p_label.dkl_vtoc.v_part[i].p_tag) || (b_label.dkl_vtoc.v_part[i].p_flag != p_label.dkl_vtoc.v_part[i]. p_flag) || (b_label.dkl_vtoc.v_part[i].p_start != p_label.dkl_vtoc.v_part[i]. p_start) || (b_label.dkl_vtoc.v_part[i].p_size != p_label.dkl_vtoc.v_part[i]. p_size)) { b_label_bad = 1; break; } #else #error No VTOC layout defined. #endif /* defined(_SUNOS_VTOC_8) */ } } } if (b_label_bad) err_print( "Warning: Primary and backup labels do not match.\n"); break; } /* * If we didn't find any backup labels, say so. */ if (!b_label_found) err_print("Warning: Could not read backup labels.\n"); if ((!b_label_found) || (p_label_bad) || (b_label_bad)) err_print("\n\ Warning: Check the current partitioning and 'label' the disk or use the\n\ \t 'backup' command.\n"); /* * Print label information. */ if (p_label_found) { fmt_print("\nPrimary label contents:\n"); label = &p_label; } else if (b_label_found) { fmt_print("\nBackup label contents:\n"); label = &b_label; } else { free(buf); return (0); } /* * Must put info into partition_info struct for * for print routine. */ bzero(&tmp_pinfo, sizeof (struct partition_info)); for (i = 0; i < NDKMAP; i++) { #if defined(_SUNOS_VTOC_8) tmp_pinfo.pinfo_map[i] = label->dkl_map[i]; #elif defined(_SUNOS_VTOC_16) tmp_pinfo.pinfo_map[i].dkl_cylno = label->dkl_vtoc.v_part[i].p_start / spc(); tmp_pinfo.pinfo_map[i].dkl_nblk = label->dkl_vtoc.v_part[i].p_size; #else #error No VTOC layout defined. #endif /* defined(_SUNOS_VTOC_8) */ } tmp_pinfo.vtoc = label->dkl_vtoc; fmt_print("\n"); fmt_print("Volume name = <%8s>\n", label->dkl_vtoc.v_volume); fmt_print("ascii name = <%s>\n", id_str); fmt_print("pcyl = %4d\n", label->dkl_pcyl); fmt_print("ncyl = %4d\n", label->dkl_ncyl); fmt_print("acyl = %4d\n", label->dkl_acyl); #if defined(_SUNOS_VTOC_16) fmt_print("bcyl = %4d\n", label->dkl_bcyl); #endif /* defined(_SUNOS_VTOC_16) */ fmt_print("nhead = %4d\n", label->dkl_nhead); fmt_print("nsect = %4d\n", label->dkl_nsect); print_map(&tmp_pinfo); free(buf); return (0); } /* * This command implements the inquiry command, for embedded SCSI * disks only, which issues a SCSI inquiry command, and * displays the resulting vendor, product id and revision level. */ int c_inquiry() { char inqbuf[255]; struct scsi_inquiry *inq; assert(SCSI); inq = (struct scsi_inquiry *)inqbuf; if (uscsi_inquiry(cur_file, inqbuf, sizeof (inqbuf))) { err_print("Failed\n"); return (-1); } else { fmt_print("Vendor: "); print_buf(inq->inq_vid, sizeof (inq->inq_vid)); fmt_print("\nProduct: "); print_buf(inq->inq_pid, sizeof (inq->inq_pid)); fmt_print("\nRevision: "); print_buf(inq->inq_revision, sizeof (inq->inq_revision)); fmt_print("\n"); } return (0); } /* * This routine allows the user to set the 8-character * volume name in the vtoc. It then writes both the * primary and backup labels onto the current disk. */ int c_volname() { int status; char *prompt; union { int xfoo; char defvolname[LEN_DKL_VVOL+1]; } x; char s1[MAXPATHLEN], nclean[MAXPATHLEN]; char *volname; /* * There must be a current disk type (and therefore a current disk). */ if (cur_dtype == NULL) { err_print("Current Disk Type is not set.\n"); return (-1); } /* * The current disk must be formatted to label it. */ if (!(cur_flags & DISK_FORMATTED)) { err_print("Current Disk is unformatted.\n"); return (-1); } /* * Check for a valid fdisk table entry for Solaris */ if (!good_fdisk()) { return (-1); } /* * The current disk must be formatted to label it. */ if (cur_parts == NULL) { err_print( "Please select a partition map for the disk first.\n"); return (-1); } /* * Check to see if there are any mounted file systems anywhere * on the current disk. If so, refuse to label the disk, but * only if the partitions would change for the mounted partitions. * */ if (checkmount((diskaddr_t)-1, (diskaddr_t)-1)) { /* Bleagh, too descriptive */ if (check_label_with_mount()) { err_print( "Cannot label disk while it has mounted partitions.\n\n"); return (-1); } } /* * Check to see if there are partitions being used for swapping * on the current disk. If so, refuse to label the disk, but * only if the partitions would change for the swap partitions. * */ if (checkswap((diskaddr_t)-1, (diskaddr_t)-1)) { /* Bleagh, too descriptive */ if (check_label_with_swap()) { err_print( "Cannot label disk while its partitions are currently \ being used for swapping.\n\n"); return (-1); } } /* * Check to see if any partitions used for svm, vxvm, ZFS zpool * or live upgrade are on the disk. If so, refuse to label the * disk, but only if we are trying to shrink a partition in * use. */ if (checkdevinuse(cur_disk->disk_name, (diskaddr_t)-1, (diskaddr_t)-1, 0, 1)) { err_print("Cannot label disk while its partitions " "are in use as described.\n"); return (-1); } /* * Prompt for the disk volume name. */ prompt = "Enter 8-character volume name (remember quotes)"; bzero(x.defvolname, LEN_DKL_VVOL+1); bcopy(cur_disk->v_volume, x.defvolname, LEN_DKL_VVOL); /* * Get the input using "get_inputline" since * input would never return null string. */ fmt_print("%s[\"%s\"]:", prompt, x.defvolname); /* * Get input from the user. */ get_inputline(nclean, MAXPATHLEN); clean_token(s1, nclean); /* * check for return. */ if (s1[0] == 0) { volname = x.defvolname; } else { /* * remove the " mark from volname. */ if (s1[0] == '"') { int i = 1; volname = &s1[1]; while (s1[i] != '"' && s1[i] != '\0') i++; s1[i] = '\0'; clean_token(nclean, volname); volname = nclean; } else { (void) sscanf(&s1[0], "%1024s", nclean); volname = nclean; }; } /* * Make sure the user is serious. */ if (check("Ready to label disk, continue")) { fmt_print("\n"); return (-1); } /* * Use the volume name chosen above */ bzero(cur_disk->v_volume, LEN_DKL_VVOL); bcopy(volname, cur_disk->v_volume, min((int)strlen(volname), LEN_DKL_VVOL)); if (cur_label == L_TYPE_EFI) { bzero(cur_parts->etoc->efi_parts[8].p_name, LEN_DKL_VVOL); bcopy(volname, cur_parts->etoc->efi_parts[8].p_name, LEN_DKL_VVOL); } /* * Write the labels out (this will also notify unix) and * return status. */ fmt_print("\n"); if (status = write_label()) err_print("Label failed.\n"); return (status); }