/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2006 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" #if defined(lint) #include #include #else /* lint */ #include "assym.h" #endif /* lint */ #include #include #include #include #include #include #include #include #include #define INTR_REPORT_SIZE 64 #ifdef TRAPTRACE #include #endif /* TRAPTRACE */ #if defined(lint) void cpu_mondo(void) {} #else /* lint */ /* * (TT 0x7c, TL>0) CPU Mondo Queue Handler * Globals are the Interrupt Globals. */ ENTRY_NP(cpu_mondo) ! ! Register Usage:- ! %g5 PC for fasttrap TL>0 handler ! %g1 arg 1 ! %g2 arg 2 ! %g3 queue base VA ! %g4 queue size mask ! %g6 head ptr ! %g7 tail ptr mov CPU_MONDO_Q_HD, %g3 ldxa [%g3]ASI_QUEUE, %g6 ! %g6 = head ptr mov CPU_MONDO_Q_TL, %g4 ldxa [%g4]ASI_QUEUE, %g7 ! %g7 = tail ptr cmp %g6, %g7 be,pn %xcc, 0f ! head == tail nop CPU_ADDR(%g1,%g2) add %g1, CPU_MCPU, %g2 ldx [%g2 + MCPU_CPU_Q_BASE], %g3 ! %g3 = queue base PA ldx [%g2 + MCPU_CPU_Q_SIZE], %g4 ! queue size sub %g4, 1, %g4 ! %g4 = queue size mask ! Load interrupt receive data registers 1 and 2 to fetch ! the arguments for the fast trap handler. ! ! XXX - Since the data words in the interrupt report are not defined yet ! we assume that the consective words contain valid data and preserve ! sun4u's xcall mondo arguments. ! Register usage: ! %g5 PC for fasttrap TL>0 handler ! %g1 arg 1 ! %g2 arg 2 ldxa [%g3 + %g6]ASI_MEM, %g5 ! get PC from q base + head add %g6, 0x8, %g6 ! inc head ldxa [%g3 + %g6]ASI_MEM, %g1 ! read data word 1 add %g6, 0x8, %g6 ! inc head ldxa [%g3 + %g6]ASI_MEM, %g2 ! read data word 2 add %g6, (INTR_REPORT_SIZE - 16) , %g6 ! inc head to next record and %g6, %g4, %g6 ! and size mask for wrap around mov CPU_MONDO_Q_HD, %g3 stxa %g6, [%g3]ASI_QUEUE ! store head pointer membar #Sync #ifdef TRAPTRACE TRACE_PTR(%g4, %g6) GET_TRACE_TICK(%g6) stxa %g6, [%g4 + TRAP_ENT_TICK]%asi TRACE_SAVE_TL_GL_REGS(%g4, %g6) rdpr %tt, %g6 stha %g6, [%g4 + TRAP_ENT_TT]%asi rdpr %tpc, %g6 stna %g6, [%g4 + TRAP_ENT_TPC]%asi rdpr %tstate, %g6 stxa %g6, [%g4 + TRAP_ENT_TSTATE]%asi stna %sp, [%g4 + TRAP_ENT_SP]%asi stna %g5, [%g4 + TRAP_ENT_TR]%asi ! pc of the TL>0 handler stna %g1, [%g4 + TRAP_ENT_F1]%asi ! arg1 stna %g2, [%g4 + TRAP_ENT_F3]%asi ! arg2 mov CPU_MONDO_Q_HD, %g6 ldxa [%g6]ASI_QUEUE, %g6 ! new head offset stna %g6, [%g4 + TRAP_ENT_F2]%asi stna %g7, [%g4 + TRAP_ENT_F4]%asi ! tail offset TRACE_NEXT(%g4, %g6, %g3) #endif /* TRAPTRACE */ /* * For now catch invalid PC being passed via cpu_mondo queue */ set KERNELBASE, %g4 cmp %g5, %g4 bl,a,pn %xcc, 1f ! branch if bad %pc nop jmp %g5 ! jump to traphandler nop 1: ! invalid trap handler, discard it for now set cpu_mondo_inval, %g4 ldx [%g4], %g5 inc %g5 stx %g5, [%g4] 0: retry /* Never Reached */ SET_SIZE(cpu_mondo) #endif /* lint */ #if defined(lint) void dev_mondo(void) {} #else /* lint */ /* * (TT 0x7d, TL>0) Dev Mondo Queue Handler * Globals are the Interrupt Globals. * We only process one interrupt at a time causing us to keep * taking this trap till the queue is empty. * We really should drain the whole queue for better performance * but this will do for now. */ ENTRY_NP(dev_mondo) ! ! Register Usage:- ! %g5 PC for fasttrap TL>0 handler ! %g1 arg 1 ! %g2 arg 2 ! %g3 queue base PA ! %g4 queue size mask ! %g6 head ptr ! %g7 tail ptr mov DEV_MONDO_Q_HD, %g3 ldxa [%g3]ASI_QUEUE, %g6 ! %g6 = head ptr mov DEV_MONDO_Q_TL, %g4 ldxa [%g4]ASI_QUEUE, %g7 ! %g7 = tail ptr cmp %g6, %g7 be,pn %xcc, 0f ! head == tail nop CPU_ADDR(%g1,%g2) add %g1, CPU_MCPU, %g2 ldx [%g2 + MCPU_DEV_Q_BASE], %g3 ! %g3 = queue base PA ! Register usage: ! %g5 - inum ! %g1 - cpu struct pointer used below in TRAPTRACE ! ldxa [%g3 + %g6]ASI_MEM, %g5 ! get inum from q base + head ! ! We verify that inum is valid ( < MAXVNUM). If it is greater ! than MAXVNUM, we let setvecint_tl1 take care of it. ! set MAXIVNUM, %g4 cmp %g5, %g4 bgeu,a,pn %xcc, 1f ldx [%g2 + MCPU_DEV_Q_SIZE], %g4 ! queue size - delay slot ! ! Copy 64-byte payload to the *iv_payload if it is not NULL ! set intr_vec_table, %g1 ! %g1 = intr_vec_table sll %g5, CPTRSHIFT, %g7 ! %g7 = offset to inum entry ! in the intr_vec_table add %g1, %g7, %g7 ! %g7 = &intr_vec_table[inum] ldn [%g7], %g1 ! %g1 = ptr to intr_vec_t (iv) ldx [%g1 + IV_PAYLOAD_BUF], %g1 ! %g1 = iv->iv_payload_buf brz,a,pt %g1, 1f ! if it is NULL ldx [%g2 + MCPU_DEV_Q_SIZE], %g4 ! queue size - delay slot ! ! Now move 64 byte payload from mondo queue to buf ! mov %g6, %g7 ! %g7 = head ptr ldxa [%g3 + %g7]ASI_MEM, %g4 stx %g4, [%g1 + 0] ! byte 0 - 7 add %g7, 8, %g7 ldxa [%g3 + %g7]ASI_MEM, %g4 stx %g4, [%g1 + 8] ! byte 8 - 15 add %g7, 8, %g7 ldxa [%g3 + %g7]ASI_MEM, %g4 stx %g4, [%g1 + 16] ! byte 16 - 23 add %g7, 8, %g7 ldxa [%g3 + %g7]ASI_MEM, %g4 stx %g4, [%g1 + 24] ! byte 24 - 31 add %g7, 8, %g7 ldxa [%g3 + %g7]ASI_MEM, %g4 stx %g4, [%g1 + 32] ! byte 32 - 39 add %g7, 8, %g7 ldxa [%g3 + %g7]ASI_MEM, %g4 stx %g4, [%g1 + 40] ! byte 40 - 47 add %g7, 8, %g7 ldxa [%g3 + %g7]ASI_MEM, %g4 stx %g4, [%g1 + 48] ! byte 48 - 55 add %g7, 8, %g7 ldxa [%g3 + %g7]ASI_MEM, %g4 stx %g4, [%g1 + 56] ! byte 56 - 63 ldx [%g2 + MCPU_DEV_Q_SIZE], %g4 ! queue size 1: sub %g4, 1, %g4 ! %g4 = queue size mask add %g6, INTR_REPORT_SIZE , %g6 ! inc head to next record and %g6, %g4, %g6 ! and mask for wrap around mov DEV_MONDO_Q_HD, %g3 stxa %g6, [%g3]ASI_QUEUE ! increment head offset membar #Sync #ifdef TRAPTRACE TRACE_PTR(%g4, %g6) GET_TRACE_TICK(%g6) stxa %g6, [%g4 + TRAP_ENT_TICK]%asi TRACE_SAVE_TL_GL_REGS(%g4, %g6) rdpr %tt, %g6 stha %g6, [%g4 + TRAP_ENT_TT]%asi rdpr %tpc, %g6 stna %g6, [%g4 + TRAP_ENT_TPC]%asi rdpr %tstate, %g6 stxa %g6, [%g4 + TRAP_ENT_TSTATE]%asi ! move head to sp ldx [%g2 + MCPU_DEV_Q_BASE], %g6 stna %g6, [%g4 + TRAP_ENT_SP]%asi ! Device Queue Base PA stna %g5, [%g4 + TRAP_ENT_TR]%asi ! Inum mov DEV_MONDO_Q_HD, %g6 ldxa [%g6]ASI_QUEUE, %g6 ! New head offset stna %g6, [%g4 + TRAP_ENT_F1]%asi #ifdef __sparcv9 ldx [%g2 + MCPU_DEV_Q_SIZE], %g6 stna %g6, [%g4 + TRAP_ENT_F2]%asi ! Q Size stna %g7, [%g4 + TRAP_ENT_F3]%asi ! tail offset stna %g0, [%g4 + TRAP_ENT_F4]%asi #endif TRACE_NEXT(%g4, %g6, %g3) #endif /* TRAPTRACE */ ! ! setvecint_tl1 will do all the work, and finish with a retry ! ba,pt %xcc, setvecint_tl1 mov %g5, %g1 ! setvecint_tl1 expects inum in %g1 0: retry /* Never Reached */ SET_SIZE(dev_mondo) #endif /* lint */ #if defined(lint) uint64_t cpu_mondo_inval; #else /* lint */ .seg ".data" .global cpu_mondo_inval .align 8 cpu_mondo_inval: .skip 8 .seg ".text" #endif /* lint */ #if defined(lint) void resumable_error(void) {} #else /* lint */ /* * (TT 0x7e, TL>0) Resumeable Error Queue Handler * We keep a shadow copy of the queue in kernel buf. * Read the resumable queue head and tail offset * If there are entries on the queue, move them to * the kernel buf, which is next to the resumable * queue in the memory. Call C routine to process. */ ENTRY_NP(resumable_error) mov CPU_RQ_HD, %g4 ldxa [%g4]ASI_QUEUE, %g2 ! %g2 = Q head offset mov CPU_RQ_TL, %g4 ldxa [%g4]ASI_QUEUE, %g3 ! %g3 = Q tail offset mov %g2, %g6 ! save head in %g2 cmp %g6, %g3 be,pn %xcc, 0f ! head == tail nop CPU_ADDR(%g1, %g4) ! %g1 = cpu struct addr 2: set CPU_RQ_BASE_OFF, %g4 ldx [%g1 + %g4], %g4 ! %g4 = queue base PA add %g6, %g4, %g4 ! %g4 = PA of ER in Q set CPU_RQ_SIZE, %g7 add %g4, %g7, %g7 ! %g7=PA of ER in kernel buf ldxa [%g7]ASI_MEM, %g5 ! %g5=first 8 byte of ER buf cmp 0, %g5 bne,pn %xcc, 1f ! first 8 byte is not 0 nop /* Now we can move 64 bytes from queue to buf */ set 0, %g5 ldxa [%g4 + %g5]ASI_MEM, %g1 stxa %g1, [%g7 + %g5]ASI_MEM ! byte 0 - 7 add %g5, 8, %g5 ldxa [%g4 + %g5]ASI_MEM, %g1 stxa %g1, [%g7 + %g5]ASI_MEM ! byte 8 - 15 add %g5, 8, %g5 ldxa [%g4 + %g5]ASI_MEM, %g1 stxa %g1, [%g7 + %g5]ASI_MEM ! byte 16 - 23 add %g5, 8, %g5 ldxa [%g4 + %g5]ASI_MEM, %g1 stxa %g1, [%g7 + %g5]ASI_MEM ! byte 24 - 31 add %g5, 8, %g5 ldxa [%g4 + %g5]ASI_MEM, %g1 stxa %g1, [%g7 + %g5]ASI_MEM ! byte 32 - 39 add %g5, 8, %g5 ldxa [%g4 + %g5]ASI_MEM, %g1 stxa %g1, [%g7 + %g5]ASI_MEM ! byte 40 - 47 add %g5, 8, %g5 ldxa [%g4 + %g5]ASI_MEM, %g1 stxa %g1, [%g7 + %g5]ASI_MEM ! byte 48 - 55 add %g5, 8, %g5 ldxa [%g4 + %g5]ASI_MEM, %g1 stxa %g1, [%g7 + %g5]ASI_MEM ! byte 56 - 63 set CPU_RQ_SIZE, %g5 ! %g5 = queue size sub %g5, 1, %g5 ! %g5 = queu size mask add %g6, Q_ENTRY_SIZE, %g6 ! increment q head to next and %g6, %g5, %g6 ! size mask for warp around cmp %g6, %g3 ! head == tail ?? bne,pn %xcc, 2b ! still have more to process nop /* * head equals to tail now, we can update the queue head * and call sys_trap */ mov CPU_RQ_HD, %g4 stxa %g6, [%g4]ASI_QUEUE ! update head offset /* * Call sys_trap at PIL 14 unless we're already at PIL 15. %g2.l is * head offset(arg2) and %g3 is tail * offset(arg3). */ set process_resumable_error, %g1 rdpr %pil, %g4 cmp %g4, PIL_14 ba sys_trap movl %icc, PIL_14, %g4 /* * We are here because the C routine is not able to process * errors in time. So the first 8 bytes of ER in buf has not * been cleared. We update head to tail and call sys_trap to * print out an error message */ 1: mov CPU_RQ_HD, %g4 stxa %g3, [%g4]ASI_QUEUE ! set head equal to tail /* * Set %g2 to %g6, which is current head offset. %g2 * is arg2 of the C routine. %g3 is the tail offset, * which is arg3 of the C routine. * Call rq_overflow at PIL 14 unless we're already at PIL 15. */ mov %g6, %g2 set rq_overflow, %g1 rdpr %pil, %g4 cmp %g4, PIL_14 ba sys_trap movl %icc, PIL_14, %g4 0: retry /*NOTREACHED*/ SET_SIZE(resumable_error) #endif /* lint */ #if defined(lint) void nonresumable_error(void) {} #else /* lint */ /* * (TT 0x7f, TL>0) Non-resumeable Error Queue Handler * We keep a shadow copy of the queue in kernel buf. * Read non-resumable queue head and tail offset * If there are entries on the queue, move them to * the kernel buf, which is next to the non-resumable * queue in the memory. Call C routine to process. */ ENTRY_NP(nonresumable_error) mov CPU_NRQ_HD, %g4 ldxa [%g4]ASI_QUEUE, %g2 ! %g2 = Q head offset mov CPU_NRQ_TL, %g4 ldxa [%g4]ASI_QUEUE, %g3 ! %g3 = Q tail offset cmp %g2, %g3 be,pn %xcc, 0f ! head == tail nop /* force %gl to 1 as sys_trap requires */ wrpr %g0, 1, %gl mov CPU_NRQ_HD, %g4 ldxa [%g4]ASI_QUEUE, %g2 ! %g2 = Q head offset mov CPU_NRQ_TL, %g4 ldxa [%g4]ASI_QUEUE, %g3 ! %g3 = Q tail offset mov %g2, %g6 ! save head in %g2 CPU_PADDR(%g1, %g4) ! %g1 = cpu struct paddr 2: set CPU_NRQ_BASE_OFF, %g4 ldxa [%g1 + %g4]ASI_MEM, %g4 ! %g4 = queue base PA add %g6, %g4, %g4 ! %g4 = PA of ER in Q set CPU_NRQ_SIZE, %g7 add %g4, %g7, %g7 ! %g7 = PA of ER in kernel buf ldxa [%g7]ASI_MEM, %g5 ! %g5 = first 8 byte of ER buf cmp 0, %g5 bne,pn %xcc, 1f ! first 8 byte is not 0 nop /* Now we can move 64 bytes from queue to buf */ set 0, %g5 ldxa [%g4 + %g5]ASI_MEM, %g1 stxa %g1, [%g7 + %g5]ASI_MEM ! byte 0 - 7 add %g5, 8, %g5 ldxa [%g4 + %g5]ASI_MEM, %g1 stxa %g1, [%g7 + %g5]ASI_MEM ! byte 8 - 15 add %g5, 8, %g5 ldxa [%g4 + %g5]ASI_MEM, %g1 stxa %g1, [%g7 + %g5]ASI_MEM ! byte 16 - 23 add %g5, 8, %g5 ldxa [%g4 + %g5]ASI_MEM, %g1 stxa %g1, [%g7 + %g5]ASI_MEM ! byte 24 - 31 add %g5, 8, %g5 ldxa [%g4 + %g5]ASI_MEM, %g1 stxa %g1, [%g7 + %g5]ASI_MEM ! byte 32 - 39 add %g5, 8, %g5 ldxa [%g4 + %g5]ASI_MEM, %g1 stxa %g1, [%g7 + %g5]ASI_MEM ! byte 40 - 47 add %g5, 8, %g5 ldxa [%g4 + %g5]ASI_MEM, %g1 stxa %g1, [%g7 + %g5]ASI_MEM ! byte 48 - 55 add %g5, 8, %g5 ldxa [%g4 + %g5]ASI_MEM, %g1 stxa %g1, [%g7 + %g5]ASI_MEM ! byte 56 - 63 set CPU_NRQ_SIZE, %g5 ! %g5 = queue size sub %g5, 1, %g5 ! %g5 = queu size mask add %g6, Q_ENTRY_SIZE, %g6 ! increment q head to next and %g6, %g5, %g6 ! size mask for warp around cmp %g6, %g3 ! head == tail ?? bne,pn %xcc, 2b ! still have more to process nop /* * head equals to tail now, we can update the queue head * and call sys_trap */ mov CPU_NRQ_HD, %g4 stxa %g6, [%g4]ASI_QUEUE ! update head offset /* * Call sys_trap. %g2 is TL(arg2), %g3 is head and tail * offset(arg3). * %g3 looks like following: * +--------------------+--------------------+ * | tail offset | head offset | * +--------------------+--------------------+ * 63 32 31 0 * * Run at PIL 14 unless we're already at PIL 15. */ sllx %g3, 32, %g3 ! %g3.h = tail offset or %g3, %g2, %g3 ! %g3.l = head offset rdpr %tl, %g2 ! %g2 = current tl /* * Now check if the first error that sent us here was caused * in user's SPILL/FILL trap. If it was, we call sys_trap to * kill the user process. Several considerations: * - If multiple nonresumable errors happen, we only check the * first one. Nonresumable errors cause system either panic * or kill the user process. So the system has already * panic'ed or killed user process after processing the first * error. Therefore, no need to check if other error packet * for this type of error. * - Errors happen in user's SPILL/FILL trap will bring us at * TL = 2. * - We need to lower TL to 1 to get the trap type and tstate. * We don't go back to TL = 2 so no need to save states. */ cmp %g2, 2 bne,pt %xcc, 3f ! if tl != 2 nop /* Check to see if the trap pc is in a window spill/fill handling */ rdpr %tpc, %g4 /* tpc should be in the trap table */ set trap_table, %g5 cmp %g4, %g5 blu,pt %xcc, 3f nop set etrap_table, %g5 cmp %g4, %g5 bgeu,pt %xcc, 3f nop /* Set tl to 1 in order to read tt[1] and tstate[1] */ wrpr %g0, 1, %tl rdpr %tt, %g4 ! %g4 = tt[1] /* Check if tt[1] is a window trap */ and %g4, WTRAP_TTMASK, %g4 cmp %g4, WTRAP_TYPE bne,pt %xcc, 3f nop rdpr %tstate, %g5 ! %g5 = tstate[1] btst TSTATE_PRIV, %g5 bnz %xcc, 3f ! Is it from user code? nop /* * Now we know the error happened in user's SPILL/FILL trap. * Turn on the user spill/fill flag in %g2 */ mov 1, %g4 sllx %g4, ERRH_U_SPILL_FILL_SHIFT, %g4 or %g2, %g4, %g2 ! turn on flag in %g2 3: sub %g2, 1, %g2 ! %g2.l = previous tl set process_nonresumable_error, %g1 rdpr %pil, %g4 cmp %g4, PIL_14 ba sys_trap movl %icc, PIL_14, %g4 /* * We are here because the C routine is not able to process * errors in time. So the first 8 bytes of ER in buf has not * been cleared. We call sys_trap to panic. * Run at PIL 14 unless we're already at PIL 15. */ 1: set nrq_overflow, %g1 rdpr %pil, %g4 cmp %g4, PIL_14 ba sys_trap movl %icc, PIL_14, %g4 0: retry /*NOTREACHED*/ SET_SIZE(nonresumable_error) #endif /* lint */