/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License, Version 1.0 only * (the "License"). You may not use this file except in compliance * with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2005 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" /* * Host to PCI local bus driver */ #include #include #include #include #include #include #include #include #include /* Save minimal state. */ void *pci_statep; /* * Bus Operation functions */ static int pci_bus_map(dev_info_t *, dev_info_t *, ddi_map_req_t *, off_t, off_t, caddr_t *); static int pci_ctlops(dev_info_t *, dev_info_t *, ddi_ctl_enum_t, void *, void *); static int pci_intr_ops(dev_info_t *, dev_info_t *, ddi_intr_op_t, ddi_intr_handle_impl_t *, void *); struct bus_ops pci_bus_ops = { BUSO_REV, pci_bus_map, NULL, NULL, NULL, i_ddi_map_fault, ddi_dma_map, ddi_dma_allochdl, ddi_dma_freehdl, ddi_dma_bindhdl, ddi_dma_unbindhdl, ddi_dma_flush, ddi_dma_win, ddi_dma_mctl, pci_ctlops, ddi_bus_prop_op, 0, /* (*bus_get_eventcookie)(); */ 0, /* (*bus_add_eventcall)(); */ 0, /* (*bus_remove_eventcall)(); */ 0, /* (*bus_post_event)(); */ 0, /* (*bus_intr_ctl)(); */ 0, /* (*bus_config)(); */ 0, /* (*bus_unconfig)(); */ NULL, /* (*bus_fm_init)(); */ NULL, /* (*bus_fm_fini)(); */ NULL, /* (*bus_fm_access_enter)(); */ NULL, /* (*bus_fm_access_exit)(); */ NULL, /* (*bus_power)(); */ pci_intr_ops /* (*bus_intr_op)(); */ }; /* * One goal here is to leverage off of the pcihp.c source without making * changes to it. Call into it's cb_ops directly if needed, piggybacking * anything else needed by the pci_tools.c module. Only pci_tools and pcihp * will be opening PCI nexus driver file descriptors. */ static int pci_open(dev_t *, int, int, cred_t *); static int pci_close(dev_t, int, int, cred_t *); static int pci_ioctl(dev_t, int, intptr_t, int, cred_t *, int *); static int pci_prop_op(dev_t, dev_info_t *, ddi_prop_op_t, int, char *, caddr_t, int *); static int pci_info(dev_info_t *, ddi_info_cmd_t, void *, void **); struct cb_ops pci_cb_ops = { pci_open, /* open */ pci_close, /* close */ nodev, /* strategy */ nodev, /* print */ nodev, /* dump */ nodev, /* read */ nodev, /* write */ pci_ioctl, /* ioctl */ nodev, /* devmap */ nodev, /* mmap */ nodev, /* segmap */ nochpoll, /* poll */ pci_prop_op, /* cb_prop_op */ NULL, /* streamtab */ D_NEW | D_MP | D_HOTPLUG, /* Driver compatibility flag */ CB_REV, /* rev */ nodev, /* int (*cb_aread)() */ nodev /* int (*cb_awrite)() */ }; /* * Device Node Operation functions */ static int pci_attach(dev_info_t *devi, ddi_attach_cmd_t cmd); static int pci_detach(dev_info_t *devi, ddi_detach_cmd_t cmd); struct dev_ops pci_ops = { DEVO_REV, /* devo_rev */ 0, /* refcnt */ pci_info, /* info */ nulldev, /* identify */ nulldev, /* probe */ pci_attach, /* attach */ pci_detach, /* detach */ nulldev, /* reset */ &pci_cb_ops, /* driver operations */ &pci_bus_ops /* bus operations */ }; /* * This variable controls the default setting of the command register * for pci devices. See pci_initchild() for details. */ static ushort_t pci_command_default = PCI_COMM_ME | PCI_COMM_MAE | PCI_COMM_IO; /* * Internal routines in support of particular pci_ctlops. */ static int pci_removechild(dev_info_t *child); static int pci_initchild(dev_info_t *child); /* * Module linkage information for the kernel. */ static struct modldrv modldrv = { &mod_driverops, /* Type of module */ "host to PCI nexus driver %I%", &pci_ops, /* driver ops */ }; static struct modlinkage modlinkage = { MODREV_1, (void *)&modldrv, NULL }; int _init(void) { int e; /* * Initialize per-pci bus soft state pointer. */ e = ddi_soft_state_init(&pci_statep, sizeof (pci_state_t), 1); if (e != 0) return (e); if ((e = mod_install(&modlinkage)) != 0) ddi_soft_state_fini(&pci_statep); return (e); } int _fini(void) { int rc; rc = mod_remove(&modlinkage); if (rc != 0) return (rc); ddi_soft_state_fini(&pci_statep); return (rc); } int _info(struct modinfo *modinfop) { return (mod_info(&modlinkage, modinfop)); } /*ARGSUSED*/ static int pci_attach(dev_info_t *devi, ddi_attach_cmd_t cmd) { /* * Use the minor number as constructed by pcihp, as the index value to * ddi_soft_state_zalloc. */ int instance = ddi_get_instance(devi); pci_state_t *pcip = NULL; if (ddi_prop_update_string(DDI_DEV_T_NONE, devi, "device_type", "pci") != DDI_PROP_SUCCESS) { cmn_err(CE_WARN, "pci: 'device_type' prop create failed"); } if (ddi_soft_state_zalloc(pci_statep, instance) == DDI_SUCCESS) { pcip = ddi_get_soft_state(pci_statep, instance); } if (pcip == NULL) { goto bad_soft_state; } pcip->pci_dip = devi; /* * Initialize hotplug support on this bus. At minimum * (for non hotplug bus) this would create ":devctl" minor * node to support DEVCTL_DEVICE_* and DEVCTL_BUS_* ioctls * to this bus. */ if (pcihp_init(devi) != DDI_SUCCESS) { cmn_err(CE_WARN, "pci: Failed to setup hotplug framework"); goto bad_pcihp_init; } /* Second arg: initialize for pci, not pci_express */ if (pcitool_init(devi, B_FALSE) != DDI_SUCCESS) { goto bad_pcitool_init; } ddi_report_dev(devi); return (DDI_SUCCESS); bad_pcitool_init: (void) pcihp_uninit(devi); bad_pcihp_init: ddi_soft_state_free(pci_statep, instance); bad_soft_state: return (DDI_FAILURE); } /*ARGSUSED*/ static int pci_detach(dev_info_t *devi, ddi_detach_cmd_t cmd) { int instance = ddi_get_instance(devi); /* Uninitialize pcitool support. */ pcitool_uninit(devi); /* Uninitialize hotplug support on this bus. */ (void) pcihp_uninit(devi); ddi_soft_state_free(pci_statep, instance); return (DDI_SUCCESS); } static int pci_bus_map(dev_info_t *dip, dev_info_t *rdip, ddi_map_req_t *mp, off_t offset, off_t len, caddr_t *vaddrp) { struct regspec reg; ddi_map_req_t mr; ddi_acc_hdl_t *hp; ddi_acc_impl_t *ap; pci_regspec_t pci_reg; pci_regspec_t *pci_rp; int rnumber; int length; pci_acc_cfblk_t *cfp; int space; mr = *mp; /* Get private copy of request */ mp = &mr; /* * check for register number */ switch (mp->map_type) { case DDI_MT_REGSPEC: pci_reg = *(pci_regspec_t *)(mp->map_obj.rp); pci_rp = &pci_reg; if (pci_common_get_reg_prop(rdip, pci_rp) != DDI_SUCCESS) return (DDI_FAILURE); break; case DDI_MT_RNUMBER: rnumber = mp->map_obj.rnumber; /* * get ALL "reg" properties for dip, select the one of * of interest. In x86, "assigned-addresses" property * is identical to the "reg" property, so there is no * need to cross check the two to determine the physical * address of the registers. * This routine still performs some validity checks to * make sure that everything is okay. */ if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, rdip, DDI_PROP_DONTPASS, "reg", (int **)&pci_rp, (uint_t *)&length) != DDI_PROP_SUCCESS) return (DDI_FAILURE); /* * validate the register number. */ length /= (sizeof (pci_regspec_t) / sizeof (int)); if (rnumber >= length) { ddi_prop_free(pci_rp); return (DDI_FAILURE); } /* * copy the required entry. */ pci_reg = pci_rp[rnumber]; /* * free the memory allocated by ddi_prop_lookup_int_array */ ddi_prop_free(pci_rp); pci_rp = &pci_reg; if (pci_common_get_reg_prop(rdip, pci_rp) != DDI_SUCCESS) return (DDI_FAILURE); mp->map_type = DDI_MT_REGSPEC; break; default: return (DDI_ME_INVAL); } space = pci_rp->pci_phys_hi & PCI_REG_ADDR_M; /* * check for unmap and unlock of address space */ if ((mp->map_op == DDI_MO_UNMAP) || (mp->map_op == DDI_MO_UNLOCK)) { /* * Adjust offset and length * A non-zero length means override the one in the regspec. */ pci_rp->pci_phys_low += (uint_t)offset; if (len != 0) pci_rp->pci_size_low = len; switch (space) { case PCI_ADDR_CONFIG: /* No work required on unmap of Config space */ return (DDI_SUCCESS); case PCI_ADDR_IO: reg.regspec_bustype = 1; break; case PCI_ADDR_MEM64: /* * MEM64 requires special treatment on map, to check * that the device is below 4G. On unmap, however, * we can assume that everything is OK... the map * must have succeeded. */ /* FALLTHROUGH */ case PCI_ADDR_MEM32: reg.regspec_bustype = 0; break; default: return (DDI_FAILURE); } reg.regspec_addr = pci_rp->pci_phys_low; reg.regspec_size = pci_rp->pci_size_low; mp->map_obj.rp = ® return (ddi_map(dip, mp, (off_t)0, (off_t)0, vaddrp)); } /* check for user mapping request - not legal for Config */ if (mp->map_op == DDI_MO_MAP_HANDLE && space == PCI_ADDR_CONFIG) { return (DDI_FAILURE); } /* * check for config space * On x86, CONFIG is not mapped via MMU and there is * no endian-ness issues. Set the attr field in the handle to * indicate that the common routines to call the nexus driver. */ if (space == PCI_ADDR_CONFIG) { hp = (ddi_acc_hdl_t *)mp->map_handlep; /* Can't map config space without a handle */ if (hp == NULL) return (DDI_FAILURE); ap = (ddi_acc_impl_t *)hp->ah_platform_private; /* endian-ness check */ if (hp->ah_acc.devacc_attr_endian_flags == DDI_STRUCTURE_BE_ACC) return (DDI_FAILURE); /* * range check */ if ((offset >= 256) || (len > 256) || (offset + len > 256)) return (DDI_FAILURE); *vaddrp = (caddr_t)offset; ap->ahi_acc_attr |= DDI_ACCATTR_CONFIG_SPACE; ap->ahi_put8 = pci_config_wr8; ap->ahi_get8 = pci_config_rd8; ap->ahi_put64 = pci_config_wr64; ap->ahi_get64 = pci_config_rd64; ap->ahi_rep_put8 = pci_config_rep_wr8; ap->ahi_rep_get8 = pci_config_rep_rd8; ap->ahi_rep_put64 = pci_config_rep_wr64; ap->ahi_rep_get64 = pci_config_rep_rd64; ap->ahi_get16 = pci_config_rd16; ap->ahi_get32 = pci_config_rd32; ap->ahi_put16 = pci_config_wr16; ap->ahi_put32 = pci_config_wr32; ap->ahi_rep_get16 = pci_config_rep_rd16; ap->ahi_rep_get32 = pci_config_rep_rd32; ap->ahi_rep_put16 = pci_config_rep_wr16; ap->ahi_rep_put32 = pci_config_rep_wr32; /* Initialize to default check/notify functions */ ap->ahi_fault_check = i_ddi_acc_fault_check; ap->ahi_fault_notify = i_ddi_acc_fault_notify; ap->ahi_fault = 0; impl_acc_err_init(hp); /* record the device address for future reference */ cfp = (pci_acc_cfblk_t *)&hp->ah_bus_private; cfp->c_busnum = PCI_REG_BUS_G(pci_rp->pci_phys_hi); cfp->c_devnum = PCI_REG_DEV_G(pci_rp->pci_phys_hi); cfp->c_funcnum = PCI_REG_FUNC_G(pci_rp->pci_phys_hi); return (DDI_SUCCESS); } /* * range check */ if ((offset >= pci_rp->pci_size_low) || (len > pci_rp->pci_size_low) || (offset + len > pci_rp->pci_size_low)) { return (DDI_FAILURE); } /* * Adjust offset and length * A non-zero length means override the one in the regspec. */ pci_rp->pci_phys_low += (uint_t)offset; if (len != 0) pci_rp->pci_size_low = len; /* * convert the pci regsec into the generic regspec used by the * parent root nexus driver. */ switch (space) { case PCI_ADDR_IO: reg.regspec_bustype = 1; break; case PCI_ADDR_MEM64: /* * We can't handle 64-bit devices that are mapped above * 4G or that are larger than 4G. */ if (pci_rp->pci_phys_mid != 0 || pci_rp->pci_size_hi != 0) return (DDI_FAILURE); /* * Other than that, we can treat them as 32-bit mappings */ /* FALLTHROUGH */ case PCI_ADDR_MEM32: reg.regspec_bustype = 0; break; default: return (DDI_FAILURE); } reg.regspec_addr = pci_rp->pci_phys_low; reg.regspec_size = pci_rp->pci_size_low; mp->map_obj.rp = ® return (ddi_map(dip, mp, (off_t)0, (off_t)0, vaddrp)); } /*ARGSUSED*/ static int pci_ctlops(dev_info_t *dip, dev_info_t *rdip, ddi_ctl_enum_t ctlop, void *arg, void *result) { pci_regspec_t *drv_regp; uint_t reglen; int rn; int totreg; switch (ctlop) { case DDI_CTLOPS_REPORTDEV: if (rdip == (dev_info_t *)0) return (DDI_FAILURE); cmn_err(CE_CONT, "?PCI-device: %s@%s, %s%d\n", ddi_node_name(rdip), ddi_get_name_addr(rdip), ddi_driver_name(rdip), ddi_get_instance(rdip)); return (DDI_SUCCESS); case DDI_CTLOPS_INITCHILD: return (pci_initchild((dev_info_t *)arg)); case DDI_CTLOPS_UNINITCHILD: return (pci_removechild((dev_info_t *)arg)); case DDI_CTLOPS_SIDDEV: return (DDI_SUCCESS); case DDI_CTLOPS_REGSIZE: case DDI_CTLOPS_NREGS: if (rdip == (dev_info_t *)0) return (DDI_FAILURE); *(int *)result = 0; if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, rdip, DDI_PROP_DONTPASS, "reg", (int **)&drv_regp, ®len) != DDI_PROP_SUCCESS) { return (DDI_FAILURE); } totreg = (reglen * sizeof (int)) / sizeof (pci_regspec_t); if (ctlop == DDI_CTLOPS_NREGS) *(int *)result = totreg; else if (ctlop == DDI_CTLOPS_REGSIZE) { rn = *(int *)arg; if (rn >= totreg) { ddi_prop_free(drv_regp); return (DDI_FAILURE); } *(off_t *)result = drv_regp[rn].pci_size_low; } ddi_prop_free(drv_regp); return (DDI_SUCCESS); case DDI_CTLOPS_POWER: { power_req_t *reqp = (power_req_t *)arg; /* * We currently understand reporting of PCI_PM_IDLESPEED * capability. Everything else is passed up. */ if ((reqp->request_type == PMR_REPORT_PMCAP) && (reqp->req.report_pmcap_req.cap == PCI_PM_IDLESPEED)) { return (DDI_SUCCESS); } return (ddi_ctlops(dip, rdip, ctlop, arg, result)); } default: return (ddi_ctlops(dip, rdip, ctlop, arg, result)); } /* NOTREACHED */ } /* * pci_intr_ops */ static int pci_intr_ops(dev_info_t *pdip, dev_info_t *rdip, ddi_intr_op_t intr_op, ddi_intr_handle_impl_t *hdlp, void *result) { return (pci_common_intr_ops(pdip, rdip, intr_op, hdlp, result)); } static int pci_initchild(dev_info_t *child) { char name[80]; ddi_acc_handle_t config_handle; ushort_t command_preserve, command; if (pci_common_name_child(child, name, 80) != DDI_SUCCESS) { return (DDI_FAILURE); } ddi_set_name_addr(child, name); /* * Pseudo nodes indicate a prototype node with per-instance * properties to be merged into the real h/w device node. * The interpretation of the unit-address is DD[,F] * where DD is the device id and F is the function. */ if (ndi_dev_is_persistent_node(child) == 0) { extern int pci_allow_pseudo_children; ddi_set_parent_data(child, NULL); /* * Try to merge the properties from this prototype * node into real h/w nodes. */ if (ndi_merge_node(child, pci_common_name_child) == DDI_SUCCESS) { /* * Merged ok - return failure to remove the node. */ ddi_set_name_addr(child, NULL); return (DDI_FAILURE); } /* workaround for ddivs to run under PCI */ if (pci_allow_pseudo_children) { /* * If the "interrupts" property doesn't exist, * this must be the ddivs no-intr case, and it returns * DDI_SUCCESS instead of DDI_FAILURE. */ if (ddi_prop_get_int(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS, "interrupts", -1) == -1) return (DDI_SUCCESS); /* * Create the ddi_parent_private_data for a pseudo * child. */ pci_common_set_parent_private_data(child); return (DDI_SUCCESS); } /* * The child was not merged into a h/w node, * but there's not much we can do with it other * than return failure to cause the node to be removed. */ cmn_err(CE_WARN, "!%s@%s: %s.conf properties not merged", ddi_get_name(child), ddi_get_name_addr(child), ddi_get_name(child)); ddi_set_name_addr(child, NULL); return (DDI_NOT_WELL_FORMED); } if (ddi_prop_get_int(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS, "interrupts", -1) != -1) pci_common_set_parent_private_data(child); else ddi_set_parent_data(child, NULL); /* * initialize command register */ if (pci_config_setup(child, &config_handle) != DDI_SUCCESS) return (DDI_FAILURE); /* * Support for the "command-preserve" property. */ command_preserve = ddi_prop_get_int(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS, "command-preserve", 0); command = pci_config_get16(config_handle, PCI_CONF_COMM); command &= (command_preserve | PCI_COMM_BACK2BACK_ENAB); command |= (pci_command_default & ~command_preserve); pci_config_put16(config_handle, PCI_CONF_COMM, command); pci_config_teardown(&config_handle); return (DDI_SUCCESS); } static int pci_removechild(dev_info_t *dip) { struct ddi_parent_private_data *pdptr; if ((pdptr = ddi_get_parent_data(dip)) != NULL) { kmem_free(pdptr, (sizeof (*pdptr) + sizeof (struct intrspec))); ddi_set_parent_data(dip, NULL); } ddi_set_name_addr(dip, NULL); /* * Strip the node to properly convert it back to prototype form */ ddi_remove_minor_node(dip, NULL); impl_rem_dev_props(dip); return (DDI_SUCCESS); } /* * When retrofitting this module for pci_tools, functions such as open, close, * and ioctl are now pulled into this module. Before this, the functions in * the pcihp module were referenced directly. Now they are called or * referenced through the pcihp cb_ops structure from functions in this module. */ static int pci_open(dev_t *devp, int flags, int otyp, cred_t *credp) { return ((pcihp_get_cb_ops())->cb_open(devp, flags, otyp, credp)); } static int pci_close(dev_t dev, int flags, int otyp, cred_t *credp) { return ((pcihp_get_cb_ops())->cb_close(dev, flags, otyp, credp)); } static int pci_ioctl(dev_t dev, int cmd, intptr_t arg, int mode, cred_t *credp, int *rvalp) { minor_t minor = getminor(dev); int instance = PCIHP_AP_MINOR_NUM_TO_INSTANCE(minor); pci_state_t *pci_p = ddi_get_soft_state(pci_statep, instance); if (pci_p == NULL) return (ENXIO); return (pci_common_ioctl(pci_p->pci_dip, dev, cmd, arg, mode, credp, rvalp)); } static int pci_prop_op(dev_t dev, dev_info_t *dip, ddi_prop_op_t prop_op, int flags, char *name, caddr_t valuep, int *lengthp) { return ((pcihp_get_cb_ops())->cb_prop_op(dev, dip, prop_op, flags, name, valuep, lengthp)); } static int pci_info(dev_info_t *dip, ddi_info_cmd_t cmd, void *arg, void **result) { return (pcihp_info(dip, cmd, arg, result)); }