/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License, Version 1.0 only * (the "License"). You may not use this file except in compliance * with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Enclosure Services Device target driver * * Copyright 2002-2003 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #ifndef _SYS_SCSI_TARGETS_SES_H #define _SYS_SCSI_TARGETS_SES_H #pragma ident "%Z%%M% %I% %E% SMI" #include #ifdef __cplusplus extern "C" { #endif /* * Useful defines and typedefs */ #define EOK 0 #define INVOP 0x10 #define BP_PKT(bp) ((struct scsi_pkt *)(bp)->av_back) #define SET_BP_PKT(bp, s) (bp)->av_back = (struct buf *)(s) #define SCBP(pkt) ((struct scsi_status *)(pkt)->pkt_scbp) #define SCBP_C(pkt) ((*(pkt)->pkt_scbp) & STATUS_MASK) #define Scsidevp struct scsi_device * #define Scsipktp struct scsi_pkt * #define Uscmd struct uscsi_cmd #define SES_SCSI_DEVP (un->ses_scsi_devp) #define SES_DEVP(softc) ((softc)->ses_devp) #define SES_DEVINFO(softc) (SES_DEVP(softc)->sd_dev) #define SES_RQSENSE(softc) (SES_DEVP(softc)->sd_sense) #define SES_ROUTE(softc) (&SES_DEVP(softc)->sd_address) #define SES_MUTEX (&ssc->ses_devp->sd_mutex) #define ISOPEN(softc) ((softc)->ses_lyropen || (softc)->ses_oflag) #define UNUSED_PARAMETER(x) x = x /* * SAF-TE specific defines- Mandatory ones only... */ /* * READ BUFFER ('get' commands) IDs- placed in offset 2 of cdb */ #define SAFTE_RD_RDCFG 0x00 /* read enclosure configuration */ #define SAFTE_RD_RDESTS 0x01 /* read enclosure status */ #define SAFTE_RD_RDDSTS 0x04 /* read drive slot status */ /* * WRITE BUFFER ('set' commands) IDs- placed in offset 0 of databuf */ #define SAFTE_WT_DSTAT 0x10 /* write device slot status */ #define SAFTE_WT_SLTOP 0x12 /* perform slot operation */ #define SAFTE_WT_FANSPD 0x13 /* set fan speed */ #define SAFTE_WT_ACTPWS 0x14 /* turn on/off power supply */ #define SAFTE_WT_GLOBAL 0x15 /* send global command */ /* * Includes */ #include /* * Private info (Device Info. Private) * * Pointed to by the un_private pointer * of one of the SCSI_DEVICE structures. */ typedef struct ses_softc ses_softc_t; typedef struct { int (*softc_init)(ses_softc_t *, int); int (*init_enc)(ses_softc_t *); int (*get_encstat)(ses_softc_t *, int); int (*set_encstat)(ses_softc_t *, uchar_t, int); int (*get_objstat)(ses_softc_t *, ses_objarg *, int); int (*set_objstat)(ses_softc_t *, ses_objarg *, int); } encvec; typedef enum { SES_TYPE, SAFT_TYPE, SEN_TYPE } enctyp; typedef struct { uchar_t enctype; /* enclosure type */ uchar_t subenclosure; /* subenclosure id */ ushort_t svalid : 1, /* enclosure information valid */ priv : 15; /* private data, per object */ uchar_t encstat[4]; /* state && stats */ } encobj; #ifndef __lint /* no warlock for X86 */ #ifdef _KERNEL _NOTE(MUTEX_PROTECTS_DATA(scsi_device::sd_mutex, encobj)) _NOTE(DATA_READABLE_WITHOUT_LOCK(encobj::priv)) _NOTE(DATA_READABLE_WITHOUT_LOCK(encobj::svalid)) _NOTE(DATA_READABLE_WITHOUT_LOCK(encobj::enctype)) _NOTE(DATA_READABLE_WITHOUT_LOCK(encobj::encstat)) _NOTE(DATA_READABLE_WITHOUT_LOCK(encobj::subenclosure)) #endif /* _KERNEL */ #endif /* __lint */ /* * Overall Status is bits 0..3- status validity reserved at bit 7 */ #define ENCI_SVALID 0x80 struct ses_softc { enctyp ses_type; /* type of enclosure */ encvec ses_vec; /* vector to handlers */ uint_t ses_nobjects; /* number of objects */ void * ses_private; /* private data */ encobj * ses_objmap; /* objects */ uchar_t ses_encstat; /* overall status */ Scsidevp ses_devp; /* backpointer to owning SCSI device */ struct buf *ses_rqbp; /* request sense buf pointer */ Scsipktp ses_rqpkt; /* SCSI Request Sense Packet */ struct buf *ses_sbufp; /* for use in internal io */ timeout_id_t ses_restart_id; /* restart timeout id */ kcondvar_t ses_sbufcv; /* cv on sbuf */ uchar_t ses_sbufbsy; /* sbuf busy flag */ uchar_t ses_oflag; /* nonzero if opened (nonlayered) */ uchar_t ses_present; /* device present */ uchar_t ses_suspended; /* nonzero if suspended */ uchar_t ses_arq; /* auto request sense enabled */ uint_t ses_lyropen; /* layered open count */ int ses_retries; /* retry count */ /* * Associated storage for the special buf. * Since we're single threaded on sbuf anyway, * we might as well save ourselves a pile of * grief and allocate local uscsicmd and * ancillary storage here. */ Uscmd ses_uscsicmd; uchar_t ses_srqcdb[CDB_SIZE]; uchar_t ses_srqsbuf[SENSE_LENGTH]; }; #ifndef __lint /* no warlock for X86 */ #ifdef _KERNEL _NOTE(MUTEX_PROTECTS_DATA(scsi_device::sd_mutex, ses_softc)) _NOTE(MUTEX_PROTECTS_DATA(scsi_device::sd_mutex, ses_softc::ses_lyropen)) _NOTE(SCHEME_PROTECTS_DATA("not shared", scsi_arq_status)) _NOTE(SCHEME_PROTECTS_DATA("not shared", ses_softc::ses_restart_id)) _NOTE(SCHEME_PROTECTS_DATA("not shared", ses_softc::ses_retries)) _NOTE(SCHEME_PROTECTS_DATA("not shared", ses_softc::ses_present)) _NOTE(SCHEME_PROTECTS_DATA("not shared", ses_softc::ses_suspended)) _NOTE(SCHEME_PROTECTS_DATA("stable data", ses_softc::ses_type ses_softc::ses_vec ses_softc::ses_nobjects ses_softc::ses_devp ses_softc::ses_arq)) _NOTE(SCHEME_PROTECTS_DATA("sbufp cv", ses_softc::ses_sbufp ses_softc::ses_rqpkt ses_softc::ses_rqbp ses_softc::ses_sbufbsy ses_softc::ses_uscsicmd ses_softc::ses_srqcdb ses_softc::ses_srqsbuf ses_softc::ses_uscsicmd)) _NOTE(SCHEME_PROTECTS_DATA("unique per pkt", scsi_pkt buf uio scsi_cdb)) _NOTE(SCHEME_PROTECTS_DATA("unique per pkt", scsi_extended_sense scsi_status)) _NOTE(SCHEME_PROTECTS_DATA("unique per pkt", uscsi_cmd)) _NOTE(SCHEME_PROTECTS_DATA("stable data", scsi_device)) _NOTE(DATA_READABLE_WITHOUT_LOCK(ses_softc::ses_encstat)) _NOTE(DATA_READABLE_WITHOUT_LOCK(ses_softc::ses_objmap)) _NOTE(DATA_READABLE_WITHOUT_LOCK(ses_softc::ses_private)) _NOTE(DATA_READABLE_WITHOUT_LOCK(ses_softc::ses_lyropen)) _NOTE(DATA_READABLE_WITHOUT_LOCK(ses_softc::ses_oflag)) _NOTE(SCHEME_PROTECTS_DATA("absurdities", ses_objarg)) #endif /* _KERNEL */ #endif /* __lint */ /* * Compile options to turn on debugging code */ #ifdef DEBUG #define SES_DEBUG #endif /* DEBUG */ #if defined(_KERNEL) || defined(_KMEMUSER) #define SES_CE_DEBUG ((1 << 8) | CE_CONT) #define SES_CE_DEBUG1 ((2 << 8) | CE_CONT) #define SES_CE_DEBUG2 ((3 << 8) | CE_CONT) #define SES_CE_DEBUG3 ((4 << 8) | CE_CONT) #define SES_CE_DEBUG4 ((5 << 8) | CE_CONT) #define SES_CE_DEBUG5 ((6 << 8) | CE_CONT) #define SES_CE_DEBUG6 ((7 << 8) | CE_CONT) #define SES_CE_DEBUG7 ((8 << 8) | CE_CONT) #define SES_CE_DEBUG8 ((9 << 8) | CE_CONT) #define SES_CE_DEBUG9 ((10 << 8) | CE_CONT) #ifndef SES_DEBUG #define ses_debug 0 #endif /* SES_DEBUG */ #define SES_LOG if (ses_debug) ses_log #define SES_DEBUG_ENTER if (ses_debug) debug_enter /* * Various I/O timeouts. * * These are hard-coded and not adjustable. The restart macro * time input is in milliseconds with 1 msec. the minimum setting. * */ #define SES_IO_TIME 60 /* standard I/O time (sec.) */ #define SES_RESTART_TIME 100 /* I/O restart time (ms.) */ #define SES_BUSY_TIME 5000 /* I/O busy restart time (ms.) */ #define SES_ENABLE_RESTART(ms_time, pkt) { \ ssc->ses_restart_id = timeout(ses_restart, (void *) pkt, \ (ms_time)? (ms_time * drv_usectohz(1000)): drv_usectohz(1000)); \ } /* * Number of times we'll retry a normal operation. * * Note, retries have differnt weights to max retries. * Unit Attention and request sense have the most retries. * Command retries have the least. * * For no auto-request sense operation, the SES_RETRY_MULTIPLIER * must be greater than the command RETRY_COUNT. Then the request * sense commands won't impact the command retries. */ #define SES_RETRY_COUNT 4 #define SES_RETRY_MULTIPLIER 8 #define SES_CMD_RETRY SES_RETRY_MULTIPLIER #define SES_NO_RETRY 0 #define SES_SENSE_RETRY 1 #define SES_BUSY_RETRY 2 /* Retry weight is 1 */ #define SES_CMD_RETRY1(retry) \ retry += (retry > 0)? (SES_RETRY_MULTIPLIER -1) : 0; /* Retry weight is 2 */ #define SES_CMD_RETRY2(retry) \ retry += (retry > 0)? (SES_RETRY_MULTIPLIER -2) : 0; /* Retry weight is 4 */ #define SES_CMD_RETRY4(retry) \ retry += (retry > 0)? (SES_RETRY_MULTIPLIER -4) : 0; /* * ses_present definitions */ #define SES_CLOSED 0 #define SES_OPENING 1 #define SES_OPEN 2 /* * ses_callback action codes */ #define COMMAND_DONE 0 #define COMMAND_DONE_ERROR 1 #define QUE_COMMAND_NOW 3 #define QUE_COMMAND 4 #define QUE_SENSE 5 /* * PF bit for RECEIVE DIAG command; * needed for RSM first release hw. */ #define SCSI_ESI_PF 0x10 #define SEN_ID "UNISYS SUN_SEN" #define SEN_ID_LEN 24 #define SET_BP_ERROR(bp, err) bioerror(bp, err); /* * Common Driver Functions */ #if defined(_KERNEL) extern void ses_log(ses_softc_t *, int, const char *, ...); extern int ses_runcmd(ses_softc_t *, Uscmd *); extern int ses_uscsi_cmd(ses_softc_t *, Uscmd *, int, int, int, int); extern int ses_io_time; #ifdef DEBUG extern int ses_debug; #endif /* DEBUG */ #endif /* defined(_KERNEL) */ #endif /* defined(_KERNEL) || defined(_KMEMUSER) */ #ifdef __cplusplus } #endif #endif /* _SYS_SCSI_TARGETS_SES_H */