/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2007 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" #include #include #include #include #include #include #include #include #include #include #include /* * Handle software interrupts through 'softcall' mechanism * * At present softcall mechanism uses a global list headed by softhead. * Entries are added to tail and removed from head so as to preserve FIFO * nature of entries in the softcall list. softcall() takes care of adding * entries to the softtail. * * softint must take care of executing the entries in the FIFO * order. It could be called simultaneously from multiple cpus, however only * one instance of softint should process the softcall list with the exception * when CPU is stuck due to high interrupt load and can't execute callbacks. * State diagram is as follows :- * * - Upper half which is same as old state machine * (IDLE->PEND->DRAIN->IDLE) * * - Lower half which steals the entries from softcall queue and execute * in the context of softint interrupt handler. The interrupt handler * is fired on a different CPU by sending a cross-call. * * Starting state is IDLE. * * softint() * * * (c) * ____________________________________________________ * | ^ ^ * v (a) | (b) | * IDLE--------------------->PEND--------------------->DRAIN * ^ | | * | | | * | | | * | | | * | | | * | d d * | | | * | v v * | PEND DRAIN * | (e) & & * |<-----------------------STEAL STEAL * ^ | * | | * | (e) v * |_________________________<__________________________| * * * * Edge (a)->(b)->(c) are same as old state machine and these * are mutually exclusive state. * * a - When an entry is being enqueued to softcall queue then the state * moves from IDLE to PEND. * * b - When interrupt handler has started processing softcall queue. * * c - When interrupt handler finished processing softcall queue, the * state of machines goes back to IDLE. * * d - softcall() generates another softlevel1 iff interrupt handler * hasn't run recently. * * e - Either PEND|STEAL or DRAIN|STEAL is set. We let softlevel1 * handler exit because we have processed all the entries. * * When CPU is being pinned by higher level interrupts for more than * softcall_delay clock ticks, SOFT_STEAL is OR'ed so that softlevel1 * handler on the other CPU can drain the queue. * * These states are needed for softcall mechanism since Solaris has only * one interface (ie. siron ) as of now for : * * - raising a soft interrupt architecture independently (ie not through * setsoftint(..) ) * - to process the softcall queue. */ #define NSOFTCALLS 200 /* * Defined states for softcall processing. */ #define SOFT_IDLE 0x01 /* no processing is needed */ #define SOFT_PEND 0x02 /* softcall list needs processing */ #define SOFT_DRAIN 0x04 /* list is being processed */ #define SOFT_STEAL 0x08 /* list is being stolen for draining */ typedef struct softcall { void (*sc_func)(void *); /* function to call */ void *sc_arg; /* arg to pass to func */ struct softcall *sc_next; /* next in list */ } softcall_t; /* * softcall list and state variables. */ static softcall_t *softcalls; static softcall_t *softhead, *softtail, *softfree; static uint_t softcall_state; static clock_t softcall_tick; /* * This ensures that softcall entries don't get stuck for long. It's expressed * in 10 milliseconds as 1 unit. When hires_tick is set or other clock frequency * is used, softcall_init() ensures that it's still expressed as 1 = 10 milli * seconds. */ static int softcall_delay = 1; /* * The last CPU which will drain softcall queue. */ static int softcall_latest_cpuid = -1; /* * CPUSET to hold the CPU which is processing softcall queue * currently. There can be more than one CPU having bit set * but it will happen only when they are stuck. */ static cpuset_t *softcall_cpuset = NULL; /* * protects softcall lists and control variable softcall_state. */ static kmutex_t softcall_lock; static void (*kdi_softcall_func)(void); extern void siron_poke_cpu(cpuset_t); extern void siron(void); void softcall_init(void) { softcall_t *sc; softcalls = kmem_zalloc(sizeof (softcall_t) * NSOFTCALLS, KM_SLEEP); softcall_cpuset = kmem_zalloc(sizeof (cpuset_t), KM_SLEEP); for (sc = softcalls; sc < &softcalls[NSOFTCALLS]; sc++) { sc->sc_next = softfree; softfree = sc; } mutex_init(&softcall_lock, NULL, MUTEX_SPIN, (void *)ipltospl(SPL8)); softcall_state = SOFT_IDLE; softcall_tick = lbolt; if (softcall_delay < 0) softcall_delay = 1; /* * Since softcall_delay is expressed as 1 = 10 milliseconds. */ softcall_delay = softcall_delay * (hz/100); CPUSET_ZERO(*softcall_cpuset); } /* * Gets called when softcall queue is not moving forward. We choose * a CPU and poke except the ones which are already poked. */ static int softcall_choose_cpu() { cpu_t *cplist = CPU; cpu_t *cp; int intr_load = INT_MAX; int cpuid = -1; cpuset_t poke; int s; ASSERT(getpil() >= DISP_LEVEL); ASSERT(ncpus > 1); ASSERT(MUTEX_HELD(&softcall_lock)); CPUSET_ZERO(poke); /* * The hint is to start from current CPU. */ cp = cplist; do { if (CPU_IN_SET(*softcall_cpuset, cp->cpu_id) || (cp->cpu_flags & CPU_ENABLE) == 0) continue; /* if CPU is not busy */ if (cp->cpu_intrload == 0) { cpuid = cp->cpu_id; break; } if (cp->cpu_intrload < intr_load) { cpuid = cp->cpu_id; intr_load = cp->cpu_intrload; } else if (cp->cpu_intrload == intr_load) { /* * We want to poke CPUs having similar * load because we don't know which CPU is * can acknowledge level1 interrupt. The * list of such CPUs should not be large. */ if (cpuid != -1) { /* * Put the last CPU chosen because * it also has same interrupt load. */ CPUSET_ADD(poke, cpuid); cpuid = -1; } CPUSET_ADD(poke, cp->cpu_id); } } while ((cp = cp->cpu_next_onln) != cplist); /* if we found a CPU which suits best to poke */ if (cpuid != -1) { CPUSET_ZERO(poke); CPUSET_ADD(poke, cpuid); } if (CPUSET_ISNULL(poke)) { mutex_exit(&softcall_lock); return (0); } /* * We first set the bit in cpuset and then poke. */ CPUSET_XOR(*softcall_cpuset, poke); mutex_exit(&softcall_lock); /* * If softcall() was called at low pil then we may * get preempted before we raise PIL. It should be okay * because we are just going to poke CPUs now or at most * another thread may start choosing CPUs in this routine. */ s = splhigh(); siron_poke_cpu(poke); splx(s); return (1); } /* * Call function func with argument arg * at some later time at software interrupt priority */ void softcall(void (*func)(void *), void *arg) { softcall_t *sc; clock_t w; /* * protect against cross-calls */ mutex_enter(&softcall_lock); /* coalesce identical softcalls */ for (sc = softhead; sc != 0; sc = sc->sc_next) { if (sc->sc_func == func && sc->sc_arg == arg) { goto intr; } } if ((sc = softfree) == 0) panic("too many softcalls"); softfree = sc->sc_next; sc->sc_func = func; sc->sc_arg = arg; sc->sc_next = 0; if (softhead) { softtail->sc_next = sc; softtail = sc; } else softhead = softtail = sc; intr: if (softcall_state & SOFT_IDLE) { softcall_state = SOFT_PEND; softcall_tick = lbolt; mutex_exit(&softcall_lock); siron(); } else if (softcall_state & (SOFT_DRAIN|SOFT_PEND)) { w = lbolt - softcall_tick; if (w <= softcall_delay || ncpus == 1) { mutex_exit(&softcall_lock); return; } if (!(softcall_state & SOFT_STEAL)) { softcall_state |= SOFT_STEAL; /* * We want to give some more chance before * fishing around again. */ softcall_tick = lbolt; } /* softcall_lock will be released by this routine */ (void) softcall_choose_cpu(); } } void kdi_softcall(void (*func)(void)) { kdi_softcall_func = func; if (softhead == NULL) siron(); } /* * Called to process software interrupts take one off queue, call it, * repeat. * * Note queue may change during call; softcall_lock, state variables * softcall_state and softcall_latest_cpuid ensures that - * - we don't have multiple cpus pulling from the list (thus causing * a violation of FIFO order with an exception when we are stuck). * - we don't miss a new entry having been added to the head. * - we don't miss a wakeup. */ void softint(void) { softcall_t *sc = NULL; void (*func)(); caddr_t arg; int cpu_id = CPU->cpu_id; mutex_enter(&softcall_lock); if (softcall_state & (SOFT_STEAL|SOFT_PEND)) { softcall_state = SOFT_DRAIN; } else { /* * The check for softcall_cpuset being * NULL is required because it may get * called very early during boot. */ if (softcall_cpuset != NULL && CPU_IN_SET(*softcall_cpuset, cpu_id)) CPUSET_DEL(*softcall_cpuset, cpu_id); mutex_exit(&softcall_lock); goto out; } /* * Setting softcall_latest_cpuid to current CPU ensures * that there is only one active softlevel1 handler to * process softcall queues. * * Since softcall_lock lock is dropped before calling * func (callback), we need softcall_latest_cpuid * to prevent two softlevel1 hanlders working on the * queue when the first softlevel1 handler gets * stuck due to high interrupt load. */ softcall_latest_cpuid = cpu_id; /* add ourself to the cpuset */ if (!CPU_IN_SET(*softcall_cpuset, cpu_id)) CPUSET_ADD(*softcall_cpuset, cpu_id); for (;;) { softcall_tick = lbolt; if ((sc = softhead) != NULL) { func = sc->sc_func; arg = sc->sc_arg; softhead = sc->sc_next; sc->sc_next = softfree; softfree = sc; } if (sc == NULL) { if (CPU_IN_SET(*softcall_cpuset, cpu_id)) CPUSET_DEL(*softcall_cpuset, cpu_id); softcall_state = SOFT_IDLE; ASSERT(softcall_latest_cpuid == cpu_id); softcall_latest_cpuid = -1; mutex_exit(&softcall_lock); break; } mutex_exit(&softcall_lock); func(arg); mutex_enter(&softcall_lock); /* * No longer need softcall processing from current * interrupt handler because either * (a) softcall is in SOFT_IDLE state or * (b) There is a CPU already draining softcall * queue and the current softlevel1 is no * longer required. */ if (softcall_latest_cpuid != cpu_id) { if (CPU_IN_SET(*softcall_cpuset, cpu_id)) CPUSET_DEL(*softcall_cpuset, cpu_id); mutex_exit(&softcall_lock); break; } } out: if ((func = kdi_softcall_func) != NULL) { kdi_softcall_func = NULL; func(); } }