/* * Copyright 2007 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ /* * Copyright (c) 2001 Atsushi Onoe * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #pragma ident "%Z%%M% %I% %E% SMI" /* * Process received frame */ #include #include "net80211_impl.h" static mblk_t *ieee80211_defrag(ieee80211com_t *, ieee80211_node_t *, mblk_t *, int); /* * Process a received frame. The node associated with the sender * should be supplied. If nothing was found in the node table then * the caller is assumed to supply a reference to ic_bss instead. * The RSSI and a timestamp are also supplied. The RSSI data is used * during AP scanning to select a AP to associate with; it can have * any units so long as values have consistent units and higher values * mean ``better signal''. The receive timestamp is currently not used * by the 802.11 layer. */ int ieee80211_input(ieee80211com_t *ic, mblk_t *mp, struct ieee80211_node *in, int32_t rssi, uint32_t rstamp) { struct ieee80211_frame *wh; struct ieee80211_key *key; uint8_t *bssid; int hdrspace; int len; uint16_t rxseq; uint8_t dir; uint8_t type; uint8_t subtype; uint8_t tid; ASSERT(in != NULL); type = (uint8_t)-1; /* undefined */ len = mp->b_wptr - mp->b_rptr; if (len < sizeof (struct ieee80211_frame_min)) { ieee80211_dbg(IEEE80211_MSG_ANY, "ieee80211_input: " "too short (1): len %u", len); goto out; } /* * Bit of a cheat here, we use a pointer for a 3-address * frame format but don't reference fields past outside * ieee80211_frame_min w/o first validating the data is * present. */ wh = (struct ieee80211_frame *)mp->b_rptr; if ((wh->i_fc[0] & IEEE80211_FC0_VERSION_MASK) != IEEE80211_FC0_VERSION_0) { ieee80211_dbg(IEEE80211_MSG_ANY, "ieee80211_input: " "discard pkt with wrong version %x", wh->i_fc[0]); goto out; } dir = wh->i_fc[1] & IEEE80211_FC1_DIR_MASK; type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK; subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK; IEEE80211_LOCK(ic); if (!(ic->ic_flags & IEEE80211_F_SCAN)) { switch (ic->ic_opmode) { case IEEE80211_M_STA: bssid = wh->i_addr2; if (!IEEE80211_ADDR_EQ(bssid, in->in_bssid)) goto out_exit_mutex; break; case IEEE80211_M_IBSS: case IEEE80211_M_AHDEMO: if (dir != IEEE80211_FC1_DIR_NODS) { bssid = wh->i_addr1; } else if (type == IEEE80211_FC0_TYPE_CTL) { bssid = wh->i_addr1; } else { if (len < sizeof (struct ieee80211_frame)) { ieee80211_dbg(IEEE80211_MSG_ANY, "ieee80211_input: too short(2):" "len %u\n", len); goto out_exit_mutex; } bssid = wh->i_addr3; } if (type != IEEE80211_FC0_TYPE_DATA) break; /* * Data frame, validate the bssid. */ if (!IEEE80211_ADDR_EQ(bssid, ic->ic_bss->in_bssid) && !IEEE80211_ADDR_EQ(bssid, wifi_bcastaddr)) { /* not interested in */ ieee80211_dbg(IEEE80211_MSG_INPUT, "ieee80211_input: not to bss %s\n", ieee80211_macaddr_sprintf(bssid)); goto out_exit_mutex; } /* * For adhoc mode we cons up a node when it doesn't * exist. This should probably done after an ACL check. */ if (in == ic->ic_bss && ic->ic_opmode != IEEE80211_M_HOSTAP && !IEEE80211_ADDR_EQ(wh->i_addr2, in->in_macaddr)) { /* * Fake up a node for this newly * discovered member of the IBSS. */ in = ieee80211_fakeup_adhoc_node(&ic->ic_sta, wh->i_addr2); if (in == NULL) { /* NB: stat kept for alloc failure */ goto out_exit_mutex; } } break; default: goto out_exit_mutex; } in->in_rssi = (uint8_t)rssi; in->in_rstamp = rstamp; if (!(type & IEEE80211_FC0_TYPE_CTL)) { tid = 0; rxseq = (*(uint16_t *)wh->i_seq); if ((wh->i_fc[1] & IEEE80211_FC1_RETRY) && (rxseq - in->in_rxseqs[tid]) <= 0) { /* duplicate, discard */ ieee80211_dbg(IEEE80211_MSG_INPUT, "ieee80211_input: duplicate", "seqno <%u,%u> fragno <%u,%u> tid %u", rxseq >> IEEE80211_SEQ_SEQ_SHIFT, in->in_rxseqs[tid] >> IEEE80211_SEQ_SEQ_SHIFT, rxseq & IEEE80211_SEQ_FRAG_MASK, in->in_rxseqs[tid] & IEEE80211_SEQ_FRAG_MASK, tid); ic->ic_stats.is_rx_dups++; goto out_exit_mutex; } in->in_rxseqs[tid] = rxseq; } in->in_inact = 0; } hdrspace = ieee80211_hdrspace(wh); switch (type) { case IEEE80211_FC0_TYPE_DATA: if (len < hdrspace) { ieee80211_dbg(IEEE80211_MSG_ANY, "ieee80211_input: " "data too short: expecting %u", hdrspace); goto out_exit_mutex; } switch (ic->ic_opmode) { case IEEE80211_M_STA: if (dir != IEEE80211_FC1_DIR_FROMDS) { ieee80211_dbg(IEEE80211_MSG_INPUT, "ieee80211_input: data ", "unknown dir 0x%x", dir); goto out_exit_mutex; } if (IEEE80211_IS_MULTICAST(wh->i_addr1) && IEEE80211_ADDR_EQ(wh->i_addr3, ic->ic_macaddr)) { /* * In IEEE802.11 network, multicast packet * sent from me is broadcasted from AP. * It should be silently discarded for * SIMPLEX interface. */ ieee80211_dbg(IEEE80211_MSG_INPUT, "ieee80211_input: multicast echo\n"); goto out_exit_mutex; } break; case IEEE80211_M_IBSS: case IEEE80211_M_AHDEMO: if (dir != IEEE80211_FC1_DIR_NODS) { ieee80211_dbg(IEEE80211_MSG_INPUT, "ieee80211_input: unknown dir 0x%x", dir); goto out_exit_mutex; } break; default: ieee80211_err("ieee80211_input: " "receive data, unknown opmode %u, skip\n", ic->ic_opmode); goto out_exit_mutex; } /* * Handle privacy requirements. */ if (wh->i_fc[1] & IEEE80211_FC1_WEP) { if ((ic->ic_flags & IEEE80211_F_PRIVACY) == 0) { /* * Discard encrypted frames when privacy off. */ ieee80211_dbg(IEEE80211_MSG_INPUT, "ieee80211_input: ""WEP PRIVACY off"); ic->ic_stats.is_wep_errors++; goto out_exit_mutex; } key = ieee80211_crypto_decap(ic, mp, hdrspace); if (key == NULL) { /* NB: stats+msgs handled in crypto_decap */ ic->ic_stats.is_wep_errors++; goto out_exit_mutex; } wh = (struct ieee80211_frame *)mp->b_rptr; wh->i_fc[1] &= ~IEEE80211_FC1_WEP; } else { key = NULL; } /* * Next up, any fragmentation */ if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { mp = ieee80211_defrag(ic, in, mp, hdrspace); if (mp == NULL) { /* Fragment dropped or frame not complete yet */ goto out_exit_mutex; } } wh = NULL; /* no longer valid, catch any uses */ /* * Next strip any MSDU crypto bits. */ if (key != NULL && !ieee80211_crypto_demic(ic, key, mp, 0)) { ieee80211_dbg(IEEE80211_MSG_INPUT, "ieee80211_input: " "data demic error\n"); goto out_exit_mutex; } ic->ic_stats.is_rx_frags++; ic->ic_stats.is_rx_bytes += len; IEEE80211_UNLOCK(ic); mac_rx(ic->ic_mach, NULL, mp); return (IEEE80211_FC0_TYPE_DATA); case IEEE80211_FC0_TYPE_MGT: if (dir != IEEE80211_FC1_DIR_NODS) goto out_exit_mutex; if (len < sizeof (struct ieee80211_frame)) goto out_exit_mutex; if (wh->i_fc[1] & IEEE80211_FC1_WEP) { if (subtype != IEEE80211_FC0_SUBTYPE_AUTH) { /* * Only shared key auth frames with a challenge * should be encrypted, discard all others. */ ieee80211_dbg(IEEE80211_MSG_INPUT, "ieee80211_input: " "%s WEP set but not permitted", IEEE80211_SUBTYPE_NAME(subtype)); ic->ic_stats.is_wep_errors++; goto out_exit_mutex; } if ((ic->ic_flags & IEEE80211_F_PRIVACY) == 0) { /* * Discard encrypted frames when privacy off. */ ieee80211_dbg(IEEE80211_MSG_INPUT, "ieee80211_input: " "mgt WEP set but PRIVACY off"); ic->ic_stats.is_wep_errors++; goto out_exit_mutex; } key = ieee80211_crypto_decap(ic, mp, hdrspace); if (key == NULL) { /* NB: stats+msgs handled in crypto_decap */ goto out_exit_mutex; } wh = (struct ieee80211_frame *)mp->b_rptr; wh->i_fc[1] &= ~IEEE80211_FC1_WEP; } IEEE80211_UNLOCK(ic); ic->ic_recv_mgmt(ic, mp, in, subtype, rssi, rstamp); goto out; case IEEE80211_FC0_TYPE_CTL: default: ieee80211_dbg(IEEE80211_MSG_ANY, "ieee80211_input: " "bad frame type 0x%x", type); /* should not come here */ break; } out_exit_mutex: IEEE80211_UNLOCK(ic); out: if (mp != NULL) freemsg(mp); return (type); } /* * This function reassemble fragments. * More fragments bit in the frame control means the packet is fragmented. * While the sequence control field consists of 4-bit fragment number * field and a 12-bit sequence number field. */ /* ARGSUSED */ static mblk_t * ieee80211_defrag(ieee80211com_t *ic, struct ieee80211_node *in, mblk_t *mp, int hdrspace) { struct ieee80211_frame *wh = (struct ieee80211_frame *)mp->b_rptr; struct ieee80211_frame *lwh; mblk_t *mfrag; uint16_t rxseq; uint8_t fragno; uint8_t more_frag; ASSERT(!IEEE80211_IS_MULTICAST(wh->i_addr1)); more_frag = wh->i_fc[1] & IEEE80211_FC1_MORE_FRAG; rxseq = LE_16(*(uint16_t *)wh->i_seq); fragno = rxseq & IEEE80211_SEQ_FRAG_MASK; /* Quick way out, if there's nothing to defragment */ if (!more_frag && fragno == 0 && in->in_rxfrag == NULL) return (mp); /* * Remove frag to insure it doesn't get reaped by timer. */ if (in->in_table == NULL) { /* * Should never happen. If the node is orphaned (not in * the table) then input packets should not reach here. * Otherwise, a concurrent request that yanks the table * should be blocked by other interlocking and/or by first * shutting the driver down. Regardless, be defensive * here and just bail */ freemsg(mp); return (NULL); } IEEE80211_NODE_LOCK(in->in_table); mfrag = in->in_rxfrag; in->in_rxfrag = NULL; IEEE80211_NODE_UNLOCK(in->in_table); /* * Validate new fragment is in order and * related to the previous ones. */ if (mfrag != NULL) { uint16_t last_rxseq; lwh = (struct ieee80211_frame *)mfrag->b_rptr; last_rxseq = LE_16(*(uint16_t *)lwh->i_seq); /* * Sequence control field contains 12-bit sequence no * and 4-bit fragment number. For fragemnts, the * sequence no is not changed. * NB: check seq # and frag together */ if (rxseq != last_rxseq + 1 || !IEEE80211_ADDR_EQ(wh->i_addr1, lwh->i_addr1) || !IEEE80211_ADDR_EQ(wh->i_addr2, lwh->i_addr2)) { /* * Unrelated fragment or no space for it, * clear current fragments. */ freemsg(mfrag); mfrag = NULL; } } if (mfrag == NULL) { if (fragno != 0) { /* !first fragment, discard */ freemsg(mp); return (NULL); } mfrag = mp; } else { /* concatenate */ (void) adjmsg(mp, hdrspace); linkb(mfrag, mp); /* track last seqnum and fragno */ lwh = (struct ieee80211_frame *)mfrag->b_rptr; *(uint16_t *)lwh->i_seq = *(uint16_t *)wh->i_seq; } if (more_frag != 0) { /* more to come, save */ in->in_rxfragstamp = ddi_get_lbolt(); in->in_rxfrag = mfrag; mfrag = NULL; } return (mfrag); } /* * Install received rate set information in the node's state block. */ int ieee80211_setup_rates(struct ieee80211_node *in, const uint8_t *rates, const uint8_t *xrates, int flags) { struct ieee80211_rateset *rs = &in->in_rates; bzero(rs, sizeof (*rs)); rs->ir_nrates = rates[1]; /* skip 1 byte element ID and 1 byte length */ bcopy(rates + 2, rs->ir_rates, rs->ir_nrates); if (xrates != NULL) { uint8_t nxrates; /* * Tack on 11g extended supported rate element. */ nxrates = xrates[1]; if (rs->ir_nrates + nxrates > IEEE80211_RATE_MAXSIZE) { nxrates = IEEE80211_RATE_MAXSIZE - rs->ir_nrates; ieee80211_dbg(IEEE80211_MSG_XRATE, "ieee80211_setup_rates: %s", "[%s] extended rate set too large;" " only using %u of %u rates\n", ieee80211_macaddr_sprintf(in->in_macaddr), nxrates, xrates[1]); } bcopy(xrates + 2, rs->ir_rates + rs->ir_nrates, nxrates); rs->ir_nrates += nxrates; } return (ieee80211_fix_rate(in, flags)); } /* * Process open-system authentication response frame and start * association if the authentication request is accepted. */ static void ieee80211_auth_open(ieee80211com_t *ic, struct ieee80211_frame *wh, struct ieee80211_node *in, uint16_t seq, uint16_t status) { IEEE80211_LOCK_ASSERT(ic); if (in->in_authmode == IEEE80211_AUTH_SHARED) { ieee80211_dbg(IEEE80211_MSG_AUTH, "open auth: bad sta auth mode %u", in->in_authmode); return; } if (ic->ic_opmode == IEEE80211_M_STA) { if (ic->ic_state != IEEE80211_S_AUTH || seq != IEEE80211_AUTH_OPEN_RESPONSE) { return; } IEEE80211_UNLOCK(ic); if (status != 0) { ieee80211_dbg(IEEE80211_MSG_DEBUG | IEEE80211_MSG_AUTH, "open auth failed (reason %d)\n", status); if (in != ic->ic_bss) in->in_fails++; ieee80211_new_state(ic, IEEE80211_S_SCAN, 0); } else { /* i_fc[0] - frame control's type & subtype field */ ieee80211_new_state(ic, IEEE80211_S_ASSOC, wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK); } IEEE80211_LOCK(ic); } else { ieee80211_dbg(IEEE80211_MSG_AUTH, "ieee80211_auth_open: " "bad operating mode %u", ic->ic_opmode); } } /* * Allocate challenge text for use by shared-key authentication * Return B_TRUE on success, B_FALST otherwise. */ static boolean_t ieee80211_alloc_challenge(struct ieee80211_node *in) { if (in->in_challenge == NULL) { in->in_challenge = kmem_alloc(IEEE80211_CHALLENGE_LEN, KM_NOSLEEP); } if (in->in_challenge == NULL) { ieee80211_dbg(IEEE80211_MSG_DEBUG | IEEE80211_MSG_AUTH, "[%s] shared key challenge alloc failed\n", ieee80211_macaddr_sprintf(in->in_macaddr)); } return (in->in_challenge != NULL); } /* * Process shared-key authentication response frames. If authentication * succeeds, start association; otherwise, restart scan. */ static void ieee80211_auth_shared(ieee80211com_t *ic, struct ieee80211_frame *wh, uint8_t *frm, uint8_t *efrm, struct ieee80211_node *in, uint16_t seq, uint16_t status) { uint8_t *challenge; /* * Pre-shared key authentication is evil; accept * it only if explicitly configured (it is supported * mainly for compatibility with clients like OS X). */ IEEE80211_LOCK_ASSERT(ic); if (in->in_authmode != IEEE80211_AUTH_AUTO && in->in_authmode != IEEE80211_AUTH_SHARED) { ieee80211_dbg(IEEE80211_MSG_AUTH, "ieee80211_auth_shared: " "bad sta auth mode %u", in->in_authmode); goto bad; } challenge = NULL; if (frm + 1 < efrm) { /* * Challenge text information element * frm[0] - element ID * frm[1] - length * frm[2]... - challenge text */ if ((frm[1] + 2) > (efrm - frm)) { ieee80211_dbg(IEEE80211_MSG_AUTH, "ieee80211_auth_shared: ie %d%d too long\n", frm[0], (frm[1] + 2) - (efrm - frm)); goto bad; } if (*frm == IEEE80211_ELEMID_CHALLENGE) challenge = frm; frm += frm[1] + 2; } switch (seq) { case IEEE80211_AUTH_SHARED_CHALLENGE: case IEEE80211_AUTH_SHARED_RESPONSE: if (challenge == NULL) { ieee80211_dbg(IEEE80211_MSG_AUTH, "ieee80211_auth_shared: no challenge\n"); goto bad; } if (challenge[1] != IEEE80211_CHALLENGE_LEN) { ieee80211_dbg(IEEE80211_MSG_AUTH, "ieee80211_auth_shared: bad challenge len %d\n", challenge[1]); goto bad; } default: break; } switch (ic->ic_opmode) { case IEEE80211_M_STA: if (ic->ic_state != IEEE80211_S_AUTH) return; switch (seq) { case IEEE80211_AUTH_SHARED_PASS: if (in->in_challenge != NULL) { kmem_free(in->in_challenge, IEEE80211_CHALLENGE_LEN); in->in_challenge = NULL; } if (status != 0) { ieee80211_dbg(IEEE80211_MSG_DEBUG | IEEE80211_MSG_AUTH, "shared key auth failed (reason %d)\n", status); if (in != ic->ic_bss) in->in_fails++; return; } IEEE80211_UNLOCK(ic); ieee80211_new_state(ic, IEEE80211_S_ASSOC, wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK); IEEE80211_LOCK(ic); break; case IEEE80211_AUTH_SHARED_CHALLENGE: if (!ieee80211_alloc_challenge(in)) return; bcopy(&challenge[2], in->in_challenge, challenge[1]); IEEE80211_UNLOCK(ic); IEEE80211_SEND_MGMT(ic, in, IEEE80211_FC0_SUBTYPE_AUTH, seq + 1); IEEE80211_LOCK(ic); break; default: ieee80211_dbg(IEEE80211_MSG_AUTH, "80211_auth_shared: " "shared key auth: bad seq %d", seq); return; } break; default: ieee80211_dbg(IEEE80211_MSG_AUTH, "ieee80211_auth_shared: bad opmode %u\n", ic->ic_opmode); break; } return; bad: if (ic->ic_opmode == IEEE80211_M_STA) { /* * Kick the state machine. This short-circuits * using the mgt frame timeout to trigger the * state transition. */ if (ic->ic_state == IEEE80211_S_AUTH) { IEEE80211_UNLOCK(ic); ieee80211_new_state(ic, IEEE80211_S_SCAN, 0); IEEE80211_LOCK(ic); } } } static int iswpaoui(const uint8_t *frm) { uint32_t c = *(uint32_t *)(frm + 2); return (frm[1] > 3 && c == ((WPA_OUI_TYPE << 24) | WPA_OUI)); } /* * Process a beacon/probe response frame. * When the device is in station mode, create a node and add it * to the node database for a new ESS or update node info if it's * already there. */ static void ieee80211_recv_beacon(ieee80211com_t *ic, mblk_t *mp, struct ieee80211_node *in, int subtype, int rssi, uint32_t rstamp) { ieee80211_impl_t *im = ic->ic_private; struct ieee80211_frame *wh; uint8_t *frm; uint8_t *efrm; /* end of frame body */ struct ieee80211_scanparams scan; wh = (struct ieee80211_frame *)mp->b_rptr; frm = (uint8_t *)&wh[1]; efrm = (uint8_t *)mp->b_wptr; /* * We process beacon/probe response frames: * o when scanning, or * o station mode when associated (to collect state * updates such as 802.11g slot time), or * o adhoc mode (to discover neighbors) * Frames otherwise received are discarded. */ if (!((ic->ic_flags & IEEE80211_F_SCAN) || (ic->ic_opmode == IEEE80211_M_STA && in->in_associd != 0) || ic->ic_opmode == IEEE80211_M_IBSS)) { return; } /* * beacon/probe response frame format * [8] time stamp * [2] beacon interval * [2] capability information * [tlv] ssid * [tlv] supported rates * [tlv] country information * [tlv] parameter set (FH/DS) * [tlv] erp information * [tlv] extended supported rates * [tlv] WME * [tlv] WPA or RSN */ IEEE80211_VERIFY_LENGTH(efrm - frm, IEEE80211_BEACON_ELEM_MIN, return); bzero(&scan, sizeof (scan)); scan.tstamp = frm; frm += 8; scan.bintval = (*(uint16_t *)frm); frm += 2; scan.capinfo = (*(uint16_t *)frm); frm += 2; scan.bchan = ieee80211_chan2ieee(ic, ic->ic_curchan); scan.chan = scan.bchan; while (frm < efrm) { /* Agere element in beacon */ if ((*frm == IEEE80211_ELEMID_AGERE1) || (*frm == IEEE80211_ELEMID_AGERE2)) { frm = efrm; break; } IEEE80211_VERIFY_LENGTH(efrm - frm, frm[1], return); switch (*frm) { case IEEE80211_ELEMID_SSID: scan.ssid = frm; break; case IEEE80211_ELEMID_RATES: scan.rates = frm; break; case IEEE80211_ELEMID_COUNTRY: scan.country = frm; break; case IEEE80211_ELEMID_FHPARMS: if (ic->ic_phytype == IEEE80211_T_FH) { scan.fhdwell = LE_16(*(uint16_t *)(frm + 2)); scan.chan = IEEE80211_FH_CHAN(frm[4], frm[5]); scan.fhindex = frm[6]; scan.phytype = IEEE80211_T_FH; } break; case IEEE80211_ELEMID_DSPARMS: if (ic->ic_phytype != IEEE80211_T_FH) { scan.chan = frm[2]; scan.phytype = IEEE80211_T_DS; } break; case IEEE80211_ELEMID_TIM: scan.tim = frm; scan.timoff = frm - mp->b_rptr; break; case IEEE80211_ELEMID_IBSSPARMS: break; case IEEE80211_ELEMID_XRATES: scan.xrates = frm; break; case IEEE80211_ELEMID_ERP: if (frm[1] != 1) { ieee80211_dbg(IEEE80211_MSG_ELEMID, "ieee80211_recv_mgmt: ignore %s, " "invalid ERP element; " "length %u, expecting 1\n", IEEE80211_SUBTYPE_NAME(subtype), frm[1]); break; } scan.erp = frm[2]; scan.phytype = IEEE80211_T_OFDM; break; case IEEE80211_ELEMID_RSN: scan.wpa = frm; break; case IEEE80211_ELEMID_VENDOR: if (iswpaoui(frm)) scan.wpa = frm; /* IEEE802.11i D3.0 */ break; default: ieee80211_dbg(IEEE80211_MSG_ELEMID, "ieee80211_recv_mgmt: ignore %s," "unhandled id %u, len %u, totallen %u", IEEE80211_SUBTYPE_NAME(subtype), *frm, frm[1], mp->b_wptr - mp->b_rptr); break; } /* frm[1] - component length */ frm += IEEE80211_ELEM_LEN(frm[1]); } IEEE80211_VERIFY_ELEMENT(scan.rates, IEEE80211_RATE_MAXSIZE, return); IEEE80211_VERIFY_ELEMENT(scan.ssid, IEEE80211_NWID_LEN, return); if (ieee80211_isclr(ic->ic_chan_active, scan.chan)) { ieee80211_dbg(IEEE80211_MSG_ELEMID | IEEE80211_MSG_INPUT, "ieee80211_recv_mgmt: ignore %s ," "invalid channel %u\n", IEEE80211_SUBTYPE_NAME(subtype), scan.chan); return; } if (scan.chan != scan.bchan && ic->ic_phytype != IEEE80211_T_FH) { /* * Frame was received on a channel different from the * one indicated in the DS params element id; * silently discard it. * * NB: this can happen due to signal leakage. * But we should take it for FH phy because * the rssi value should be correct even for * different hop pattern in FH. */ ieee80211_dbg(IEEE80211_MSG_ELEMID, "ieee80211_recv_mgmt: ignore %s ," "phytype %u channel %u marked for %u\n", IEEE80211_SUBTYPE_NAME(subtype), ic->ic_phytype, scan.bchan, scan.chan); return; } if (!(IEEE80211_BINTVAL_MIN <= scan.bintval && scan.bintval <= IEEE80211_BINTVAL_MAX)) { ieee80211_dbg(IEEE80211_MSG_ELEMID | IEEE80211_MSG_INPUT, "ieee80211_recv_mgmt: ignore %s ," "bogus beacon interval %u\n", IEEE80211_SUBTYPE_NAME(subtype), scan.bintval); return; } /* * When operating in station mode, check for state updates. * Be careful to ignore beacons received while doing a * background scan. We consider only 11g/WMM stuff right now. */ if (ic->ic_opmode == IEEE80211_M_STA && in->in_associd != 0 && (!(ic->ic_flags & IEEE80211_F_SCAN) || IEEE80211_ADDR_EQ(wh->i_addr2, in->in_bssid))) { /* record tsf of last beacon */ bcopy(scan.tstamp, in->in_tstamp.data, sizeof (in->in_tstamp)); /* count beacon frame for s/w bmiss handling */ im->im_swbmiss_count++; im->im_bmiss_count = 0; if ((in->in_capinfo ^ scan.capinfo) & IEEE80211_CAPINFO_SHORT_SLOTTIME) { ieee80211_dbg(IEEE80211_MSG_ASSOC, "ieee80211_recv_mgmt: " "[%s] cap change: before 0x%x, now 0x%x\n", ieee80211_macaddr_sprintf(wh->i_addr2), in->in_capinfo, scan.capinfo); /* * NB: we assume short preamble doesn't * change dynamically */ ieee80211_set_shortslottime(ic, ic->ic_curmode == IEEE80211_MODE_11A || (scan.capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME)); in->in_capinfo = scan.capinfo; } if (scan.tim != NULL) { struct ieee80211_tim_ie *ie; ie = (struct ieee80211_tim_ie *)scan.tim; in->in_dtim_count = ie->tim_count; in->in_dtim_period = ie->tim_period; } if (ic->ic_flags & IEEE80211_F_SCAN) { ieee80211_add_scan(ic, &scan, wh, subtype, rssi, rstamp); } return; } /* * If scanning, just pass information to the scan module. */ if (ic->ic_flags & IEEE80211_F_SCAN) { ieee80211_add_scan(ic, &scan, wh, subtype, rssi, rstamp); return; } if (scan.capinfo & IEEE80211_CAPINFO_IBSS) { if (!IEEE80211_ADDR_EQ(wh->i_addr2, in->in_macaddr)) { /* * Create a new entry in the neighbor table. */ in = ieee80211_add_neighbor(ic, wh, &scan); } else if (in->in_capinfo == 0) { /* * Update faked node created on transmit. * Note this also updates the tsf. */ ieee80211_init_neighbor(in, wh, &scan); } else { /* * Record tsf for potential resync. */ bcopy(scan.tstamp, in->in_tstamp.data, sizeof (in->in_tstamp)); } if (in != NULL) { in->in_rssi = (uint8_t)rssi; in->in_rstamp = rstamp; } } } /* * Perform input processing for 802.11 management frames. * It's the default ic_recv_mgmt callback function for the interface * softc, ic. Tipically ic_recv_mgmt is called within ieee80211_input() */ void ieee80211_recv_mgmt(ieee80211com_t *ic, mblk_t *mp, struct ieee80211_node *in, int subtype, int rssi, uint32_t rstamp) { struct ieee80211_frame *wh; uint8_t *frm; /* pointer to start of the frame */ uint8_t *efrm; /* pointer to end of the frame */ uint8_t *ssid; uint8_t *rates; uint8_t *xrates; /* extended rates */ boolean_t allocbs = B_FALSE; uint8_t rate; uint16_t algo; /* authentication algorithm */ uint16_t seq; /* sequence no */ uint16_t status; uint16_t capinfo; uint16_t associd; /* association ID */ IEEE80211_LOCK(ic); wh = (struct ieee80211_frame *)mp->b_rptr; frm = (uint8_t *)&wh[1]; efrm = (uint8_t *)mp->b_wptr; switch (subtype) { case IEEE80211_FC0_SUBTYPE_PROBE_RESP: case IEEE80211_FC0_SUBTYPE_BEACON: ieee80211_recv_beacon(ic, mp, in, subtype, rssi, rstamp); break; case IEEE80211_FC0_SUBTYPE_PROBE_REQ: if (ic->ic_opmode == IEEE80211_M_STA || ic->ic_state != IEEE80211_S_RUN || IEEE80211_IS_MULTICAST(wh->i_addr2)) { break; } /* * prreq frame format * [tlv] ssid * [tlv] supported rates * [tlv] extended supported rates */ ssid = rates = xrates = NULL; while (frm < efrm) { IEEE80211_VERIFY_LENGTH(efrm - frm, frm[1], goto out); switch (*frm) { case IEEE80211_ELEMID_SSID: ssid = frm; break; case IEEE80211_ELEMID_RATES: rates = frm; break; case IEEE80211_ELEMID_XRATES: xrates = frm; break; } frm += frm[1] + 2; } IEEE80211_VERIFY_ELEMENT(rates, IEEE80211_RATE_MAXSIZE, break); IEEE80211_VERIFY_ELEMENT(ssid, IEEE80211_NWID_LEN, break); IEEE80211_VERIFY_SSID(ic->ic_bss, ssid, break); if ((ic->ic_flags & IEEE80211_F_HIDESSID) && ssid[1] == 0) { ieee80211_dbg(IEEE80211_MSG_INPUT, "ieee80211_recv_mgmt: ignore %s, " "no ssid with ssid suppression enabled", IEEE80211_SUBTYPE_NAME(subtype)); break; } if (in == ic->ic_bss) { if (ic->ic_opmode != IEEE80211_M_IBSS) { in = ieee80211_tmp_node(ic, wh->i_addr2); allocbs = B_TRUE; } else if (!IEEE80211_ADDR_EQ(wh->i_addr2, in->in_macaddr)) { /* * Cannot tell if the sender is operating * in ibss mode. But we need a new node to * send the response so blindly add them to the * neighbor table. */ in = ieee80211_fakeup_adhoc_node(&ic->ic_sta, wh->i_addr2); } if (in == NULL) break; } ieee80211_dbg(IEEE80211_MSG_ASSOC, "ieee80211_recv_mgmt: " "[%s] recv probe req\n", ieee80211_macaddr_sprintf(wh->i_addr2)); in->in_rssi = (uint8_t)rssi; in->in_rstamp = rstamp; /* * Adjust and check station's rate list with device's * supported rate. Send back response if there is at * least one rate or the fixed rate(if being set) is * supported by both station and the device */ rate = ieee80211_setup_rates(in, rates, xrates, IEEE80211_F_DOSORT | IEEE80211_F_DOFRATE | IEEE80211_F_DONEGO | IEEE80211_F_DODEL); if (rate & IEEE80211_RATE_BASIC) { ieee80211_dbg(IEEE80211_MSG_XRATE, "ieee80211_recv_mgmt" "%s recv'd rate set invalid", IEEE80211_SUBTYPE_NAME(subtype)); } else { IEEE80211_UNLOCK(ic); IEEE80211_SEND_MGMT(ic, in, IEEE80211_FC0_SUBTYPE_PROBE_RESP, 0); IEEE80211_LOCK(ic); } if (allocbs) { /* * Temporary node created just to send a * response, reclaim immediately. */ ieee80211_free_node(in); } break; case IEEE80211_FC0_SUBTYPE_AUTH: /* * auth frame format * [2] algorithm * [2] sequence * [2] status * [tlv*] challenge */ IEEE80211_VERIFY_LENGTH(efrm - frm, IEEE80211_AUTH_ELEM_MIN, break); algo = (*(uint16_t *)frm); seq = (*(uint16_t *)(frm + 2)); status = (*(uint16_t *)(frm + 4)); ieee80211_dbg(IEEE80211_MSG_AUTH, "ieee80211_recv_mgmt: " "[%s] recv auth frame with algorithm %d seq %d\n", ieee80211_macaddr_sprintf(wh->i_addr2), algo, seq); if (ic->ic_flags & IEEE80211_F_COUNTERM) { ieee80211_dbg(IEEE80211_MSG_AUTH | IEEE80211_MSG_CRYPTO, "ieee80211_recv_mgmt: ignore auth, %s\n", "TKIP countermeasures enabled"); break; } switch (algo) { case IEEE80211_AUTH_ALG_SHARED: ieee80211_auth_shared(ic, wh, frm + 6, efrm, in, seq, status); break; case IEEE80211_AUTH_ALG_OPEN: ieee80211_auth_open(ic, wh, in, seq, status); break; default: ieee80211_dbg(IEEE80211_MSG_ANY, "ieee80211_recv_mgmt: " "ignore auth, unsupported alg %d", algo); break; } break; case IEEE80211_FC0_SUBTYPE_ASSOC_RESP: case IEEE80211_FC0_SUBTYPE_REASSOC_RESP: if (ic->ic_opmode != IEEE80211_M_STA || ic->ic_state != IEEE80211_S_ASSOC) break; /* * asresp frame format * [2] capability information * [2] status * [2] association ID * [tlv] supported rates * [tlv] extended supported rates * [tlv] WME */ IEEE80211_VERIFY_LENGTH(efrm - frm, IEEE80211_ASSOC_RESP_ELEM_MIN, break); in = ic->ic_bss; capinfo = (*(uint16_t *)frm); frm += 2; status = (*(uint16_t *)frm); frm += 2; if (status != 0) { ieee80211_dbg(IEEE80211_MSG_ASSOC, "assoc failed (reason %d)\n", status); in = ieee80211_find_node(&ic->ic_scan, wh->i_addr2); if (in != NULL) { in->in_fails++; ieee80211_free_node(in); } break; } associd = (*(uint16_t *)frm); frm += 2; rates = xrates = NULL; while (frm < efrm) { /* * Do not discard frames containing proprietary Agere * elements 128 and 129, as the reported element length * is often wrong. Skip rest of the frame, since we can * not rely on the given element length making it * impossible to know where the next element starts */ if ((*frm == IEEE80211_ELEMID_AGERE1) || (*frm == IEEE80211_ELEMID_AGERE2)) { frm = efrm; break; } IEEE80211_VERIFY_LENGTH(efrm - frm, frm[1], goto out); switch (*frm) { case IEEE80211_ELEMID_RATES: rates = frm; break; case IEEE80211_ELEMID_XRATES: xrates = frm; break; } frm += frm[1] + 2; } IEEE80211_VERIFY_ELEMENT(rates, IEEE80211_RATE_MAXSIZE, break); /* * Adjust and check AP's rate list with device's * supported rate. Re-start scan if no rate is or the * fixed rate(if being set) cannot be supported by * either AP or the device. */ rate = ieee80211_setup_rates(in, rates, xrates, IEEE80211_F_DOSORT | IEEE80211_F_DOFRATE | IEEE80211_F_DONEGO | IEEE80211_F_DODEL); if (rate & IEEE80211_RATE_BASIC) { ieee80211_dbg(IEEE80211_MSG_ASSOC, "assoc failed (rate set mismatch)\n"); if (in != ic->ic_bss) in->in_fails++; IEEE80211_UNLOCK(ic); ieee80211_new_state(ic, IEEE80211_S_SCAN, 0); return; } in->in_capinfo = capinfo; in->in_associd = associd; in->in_flags &= ~IEEE80211_NODE_QOS; /* * Configure state now that we are associated. */ if (ic->ic_curmode == IEEE80211_MODE_11A || (in->in_capinfo & IEEE80211_CAPINFO_SHORT_PREAMBLE)) { ic->ic_flags |= IEEE80211_F_SHPREAMBLE; ic->ic_flags &= ~IEEE80211_F_USEBARKER; } else { ic->ic_flags &= ~IEEE80211_F_SHPREAMBLE; ic->ic_flags |= IEEE80211_F_USEBARKER; } ieee80211_set_shortslottime(ic, ic->ic_curmode == IEEE80211_MODE_11A || (in->in_capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME)); /* * Honor ERP protection. * * NB: in_erp should zero for non-11g operation. * check ic_curmode anyway */ if (ic->ic_curmode == IEEE80211_MODE_11G && (in->in_erp & IEEE80211_ERP_USE_PROTECTION)) ic->ic_flags |= IEEE80211_F_USEPROT; else ic->ic_flags &= ~IEEE80211_F_USEPROT; ieee80211_dbg(IEEE80211_MSG_ASSOC, "assoc success: %s preamble, %s slot time%s%s\n", ic->ic_flags&IEEE80211_F_SHPREAMBLE ? "short" : "long", ic->ic_flags&IEEE80211_F_SHSLOT ? "short" : "long", ic->ic_flags&IEEE80211_F_USEPROT ? ", protection" : "", in->in_flags & IEEE80211_NODE_QOS ? ", QoS" : ""); IEEE80211_UNLOCK(ic); ieee80211_new_state(ic, IEEE80211_S_RUN, subtype); return; case IEEE80211_FC0_SUBTYPE_DEAUTH: if (ic->ic_state == IEEE80211_S_SCAN) break; /* * deauth frame format * [2] reason */ IEEE80211_VERIFY_LENGTH(efrm - frm, 2, break); status = (*(uint16_t *)frm); ieee80211_dbg(IEEE80211_MSG_AUTH, "recv deauthenticate (reason %d)\n", status); switch (ic->ic_opmode) { case IEEE80211_M_STA: IEEE80211_UNLOCK(ic); ieee80211_new_state(ic, IEEE80211_S_AUTH, wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK); return; default: break; } break; case IEEE80211_FC0_SUBTYPE_DISASSOC: if (ic->ic_state != IEEE80211_S_RUN && ic->ic_state != IEEE80211_S_ASSOC && ic->ic_state != IEEE80211_S_AUTH) break; /* * disassoc frame format * [2] reason */ IEEE80211_VERIFY_LENGTH(efrm - frm, 2, break); status = (*(uint16_t *)frm); ieee80211_dbg(IEEE80211_MSG_ASSOC, "recv disassociate (reason %d)\n", status); switch (ic->ic_opmode) { case IEEE80211_M_STA: IEEE80211_UNLOCK(ic); ieee80211_new_state(ic, IEEE80211_S_ASSOC, wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK); return; default: break; } break; default: ieee80211_dbg(IEEE80211_MSG_ANY, "ieee80211_recv_mgmt: " "subtype 0x%x not handled\n", subtype); break; } /* switch subtype */ out: IEEE80211_UNLOCK(ic); }