/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2009 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ /* * Copyright (c) 2012, 2014 by Delphix. All rights reserved. */ #include #include #include #include #include #include /* * ZFS I/O Scheduler * --------------- * * ZFS issues I/O operations to leaf vdevs to satisfy and complete zios. The * I/O scheduler determines when and in what order those operations are * issued. The I/O scheduler divides operations into five I/O classes * prioritized in the following order: sync read, sync write, async read, * async write, and scrub/resilver. Each queue defines the minimum and * maximum number of concurrent operations that may be issued to the device. * In addition, the device has an aggregate maximum. Note that the sum of the * per-queue minimums must not exceed the aggregate maximum, and if the * aggregate maximum is equal to or greater than the sum of the per-queue * maximums, the per-queue minimum has no effect. * * For many physical devices, throughput increases with the number of * concurrent operations, but latency typically suffers. Further, physical * devices typically have a limit at which more concurrent operations have no * effect on throughput or can actually cause it to decrease. * * The scheduler selects the next operation to issue by first looking for an * I/O class whose minimum has not been satisfied. Once all are satisfied and * the aggregate maximum has not been hit, the scheduler looks for classes * whose maximum has not been satisfied. Iteration through the I/O classes is * done in the order specified above. No further operations are issued if the * aggregate maximum number of concurrent operations has been hit or if there * are no operations queued for an I/O class that has not hit its maximum. * Every time an i/o is queued or an operation completes, the I/O scheduler * looks for new operations to issue. * * All I/O classes have a fixed maximum number of outstanding operations * except for the async write class. Asynchronous writes represent the data * that is committed to stable storage during the syncing stage for * transaction groups (see txg.c). Transaction groups enter the syncing state * periodically so the number of queued async writes will quickly burst up and * then bleed down to zero. Rather than servicing them as quickly as possible, * the I/O scheduler changes the maximum number of active async write i/os * according to the amount of dirty data in the pool (see dsl_pool.c). Since * both throughput and latency typically increase with the number of * concurrent operations issued to physical devices, reducing the burstiness * in the number of concurrent operations also stabilizes the response time of * operations from other -- and in particular synchronous -- queues. In broad * strokes, the I/O scheduler will issue more concurrent operations from the * async write queue as there's more dirty data in the pool. * * Async Writes * * The number of concurrent operations issued for the async write I/O class * follows a piece-wise linear function defined by a few adjustable points. * * | o---------| <-- zfs_vdev_async_write_max_active * ^ | /^ | * | | / | | * active | / | | * I/O | / | | * count | / | | * | / | | * |------------o | | <-- zfs_vdev_async_write_min_active * 0|____________^______|_________| * 0% | | 100% of zfs_dirty_data_max * | | * | `-- zfs_vdev_async_write_active_max_dirty_percent * `--------- zfs_vdev_async_write_active_min_dirty_percent * * Until the amount of dirty data exceeds a minimum percentage of the dirty * data allowed in the pool, the I/O scheduler will limit the number of * concurrent operations to the minimum. As that threshold is crossed, the * number of concurrent operations issued increases linearly to the maximum at * the specified maximum percentage of the dirty data allowed in the pool. * * Ideally, the amount of dirty data on a busy pool will stay in the sloped * part of the function between zfs_vdev_async_write_active_min_dirty_percent * and zfs_vdev_async_write_active_max_dirty_percent. If it exceeds the * maximum percentage, this indicates that the rate of incoming data is * greater than the rate that the backend storage can handle. In this case, we * must further throttle incoming writes (see dmu_tx_delay() for details). */ /* * The maximum number of i/os active to each device. Ideally, this will be >= * the sum of each queue's max_active. It must be at least the sum of each * queue's min_active. */ uint32_t zfs_vdev_max_active = 1000; /* * Per-queue limits on the number of i/os active to each device. If the * sum of the queue's max_active is < zfs_vdev_max_active, then the * min_active comes into play. We will send min_active from each queue, * and then select from queues in the order defined by zio_priority_t. * * In general, smaller max_active's will lead to lower latency of synchronous * operations. Larger max_active's may lead to higher overall throughput, * depending on underlying storage. * * The ratio of the queues' max_actives determines the balance of performance * between reads, writes, and scrubs. E.g., increasing * zfs_vdev_scrub_max_active will cause the scrub or resilver to complete * more quickly, but reads and writes to have higher latency and lower * throughput. */ uint32_t zfs_vdev_sync_read_min_active = 10; uint32_t zfs_vdev_sync_read_max_active = 10; uint32_t zfs_vdev_sync_write_min_active = 10; uint32_t zfs_vdev_sync_write_max_active = 10; uint32_t zfs_vdev_async_read_min_active = 1; uint32_t zfs_vdev_async_read_max_active = 3; uint32_t zfs_vdev_async_write_min_active = 1; uint32_t zfs_vdev_async_write_max_active = 10; uint32_t zfs_vdev_scrub_min_active = 1; uint32_t zfs_vdev_scrub_max_active = 2; /* * When the pool has less than zfs_vdev_async_write_active_min_dirty_percent * dirty data, use zfs_vdev_async_write_min_active. When it has more than * zfs_vdev_async_write_active_max_dirty_percent, use * zfs_vdev_async_write_max_active. The value is linearly interpolated * between min and max. */ int zfs_vdev_async_write_active_min_dirty_percent = 30; int zfs_vdev_async_write_active_max_dirty_percent = 60; /* * To reduce IOPs, we aggregate small adjacent I/Os into one large I/O. * For read I/Os, we also aggregate across small adjacency gaps; for writes * we include spans of optional I/Os to aid aggregation at the disk even when * they aren't able to help us aggregate at this level. */ int zfs_vdev_aggregation_limit = SPA_OLD_MAXBLOCKSIZE; int zfs_vdev_read_gap_limit = 32 << 10; int zfs_vdev_write_gap_limit = 4 << 10; int vdev_queue_offset_compare(const void *x1, const void *x2) { const zio_t *z1 = x1; const zio_t *z2 = x2; if (z1->io_offset < z2->io_offset) return (-1); if (z1->io_offset > z2->io_offset) return (1); if (z1 < z2) return (-1); if (z1 > z2) return (1); return (0); } static inline avl_tree_t * vdev_queue_class_tree(vdev_queue_t *vq, zio_priority_t p) { return (&vq->vq_class[p].vqc_queued_tree); } static inline avl_tree_t * vdev_queue_type_tree(vdev_queue_t *vq, zio_type_t t) { ASSERT(t == ZIO_TYPE_READ || t == ZIO_TYPE_WRITE); if (t == ZIO_TYPE_READ) return (&vq->vq_read_offset_tree); else return (&vq->vq_write_offset_tree); } int vdev_queue_timestamp_compare(const void *x1, const void *x2) { const zio_t *z1 = x1; const zio_t *z2 = x2; if (z1->io_timestamp < z2->io_timestamp) return (-1); if (z1->io_timestamp > z2->io_timestamp) return (1); if (z1 < z2) return (-1); if (z1 > z2) return (1); return (0); } void vdev_queue_init(vdev_t *vd) { vdev_queue_t *vq = &vd->vdev_queue; mutex_init(&vq->vq_lock, NULL, MUTEX_DEFAULT, NULL); vq->vq_vdev = vd; avl_create(&vq->vq_active_tree, vdev_queue_offset_compare, sizeof (zio_t), offsetof(struct zio, io_queue_node)); avl_create(vdev_queue_type_tree(vq, ZIO_TYPE_READ), vdev_queue_offset_compare, sizeof (zio_t), offsetof(struct zio, io_offset_node)); avl_create(vdev_queue_type_tree(vq, ZIO_TYPE_WRITE), vdev_queue_offset_compare, sizeof (zio_t), offsetof(struct zio, io_offset_node)); for (zio_priority_t p = 0; p < ZIO_PRIORITY_NUM_QUEUEABLE; p++) { int (*compfn) (const void *, const void *); /* * The synchronous i/o queues are dispatched in FIFO rather * than LBA order. This provides more consistent latency for * these i/os. */ if (p == ZIO_PRIORITY_SYNC_READ || p == ZIO_PRIORITY_SYNC_WRITE) compfn = vdev_queue_timestamp_compare; else compfn = vdev_queue_offset_compare; avl_create(vdev_queue_class_tree(vq, p), compfn, sizeof (zio_t), offsetof(struct zio, io_queue_node)); } } void vdev_queue_fini(vdev_t *vd) { vdev_queue_t *vq = &vd->vdev_queue; for (zio_priority_t p = 0; p < ZIO_PRIORITY_NUM_QUEUEABLE; p++) avl_destroy(vdev_queue_class_tree(vq, p)); avl_destroy(&vq->vq_active_tree); avl_destroy(vdev_queue_type_tree(vq, ZIO_TYPE_READ)); avl_destroy(vdev_queue_type_tree(vq, ZIO_TYPE_WRITE)); mutex_destroy(&vq->vq_lock); } static void vdev_queue_io_add(vdev_queue_t *vq, zio_t *zio) { spa_t *spa = zio->io_spa; ASSERT3U(zio->io_priority, <, ZIO_PRIORITY_NUM_QUEUEABLE); avl_add(vdev_queue_class_tree(vq, zio->io_priority), zio); avl_add(vdev_queue_type_tree(vq, zio->io_type), zio); mutex_enter(&spa->spa_iokstat_lock); spa->spa_queue_stats[zio->io_priority].spa_queued++; if (spa->spa_iokstat != NULL) kstat_waitq_enter(spa->spa_iokstat->ks_data); mutex_exit(&spa->spa_iokstat_lock); } static void vdev_queue_io_remove(vdev_queue_t *vq, zio_t *zio) { spa_t *spa = zio->io_spa; ASSERT3U(zio->io_priority, <, ZIO_PRIORITY_NUM_QUEUEABLE); avl_remove(vdev_queue_class_tree(vq, zio->io_priority), zio); avl_remove(vdev_queue_type_tree(vq, zio->io_type), zio); mutex_enter(&spa->spa_iokstat_lock); ASSERT3U(spa->spa_queue_stats[zio->io_priority].spa_queued, >, 0); spa->spa_queue_stats[zio->io_priority].spa_queued--; if (spa->spa_iokstat != NULL) kstat_waitq_exit(spa->spa_iokstat->ks_data); mutex_exit(&spa->spa_iokstat_lock); } static void vdev_queue_pending_add(vdev_queue_t *vq, zio_t *zio) { spa_t *spa = zio->io_spa; ASSERT(MUTEX_HELD(&vq->vq_lock)); ASSERT3U(zio->io_priority, <, ZIO_PRIORITY_NUM_QUEUEABLE); vq->vq_class[zio->io_priority].vqc_active++; avl_add(&vq->vq_active_tree, zio); mutex_enter(&spa->spa_iokstat_lock); spa->spa_queue_stats[zio->io_priority].spa_active++; if (spa->spa_iokstat != NULL) kstat_runq_enter(spa->spa_iokstat->ks_data); mutex_exit(&spa->spa_iokstat_lock); } static void vdev_queue_pending_remove(vdev_queue_t *vq, zio_t *zio) { spa_t *spa = zio->io_spa; ASSERT(MUTEX_HELD(&vq->vq_lock)); ASSERT3U(zio->io_priority, <, ZIO_PRIORITY_NUM_QUEUEABLE); vq->vq_class[zio->io_priority].vqc_active--; avl_remove(&vq->vq_active_tree, zio); mutex_enter(&spa->spa_iokstat_lock); ASSERT3U(spa->spa_queue_stats[zio->io_priority].spa_active, >, 0); spa->spa_queue_stats[zio->io_priority].spa_active--; if (spa->spa_iokstat != NULL) { kstat_io_t *ksio = spa->spa_iokstat->ks_data; kstat_runq_exit(spa->spa_iokstat->ks_data); if (zio->io_type == ZIO_TYPE_READ) { ksio->reads++; ksio->nread += zio->io_size; } else if (zio->io_type == ZIO_TYPE_WRITE) { ksio->writes++; ksio->nwritten += zio->io_size; } } mutex_exit(&spa->spa_iokstat_lock); } static void vdev_queue_agg_io_done(zio_t *aio) { if (aio->io_type == ZIO_TYPE_READ) { zio_t *pio; while ((pio = zio_walk_parents(aio)) != NULL) { bcopy((char *)aio->io_data + (pio->io_offset - aio->io_offset), pio->io_data, pio->io_size); } } zio_buf_free(aio->io_data, aio->io_size); } static int vdev_queue_class_min_active(zio_priority_t p) { switch (p) { case ZIO_PRIORITY_SYNC_READ: return (zfs_vdev_sync_read_min_active); case ZIO_PRIORITY_SYNC_WRITE: return (zfs_vdev_sync_write_min_active); case ZIO_PRIORITY_ASYNC_READ: return (zfs_vdev_async_read_min_active); case ZIO_PRIORITY_ASYNC_WRITE: return (zfs_vdev_async_write_min_active); case ZIO_PRIORITY_SCRUB: return (zfs_vdev_scrub_min_active); default: panic("invalid priority %u", p); return (0); } } static int vdev_queue_max_async_writes(spa_t *spa) { int writes; uint64_t dirty = spa->spa_dsl_pool->dp_dirty_total; uint64_t min_bytes = zfs_dirty_data_max * zfs_vdev_async_write_active_min_dirty_percent / 100; uint64_t max_bytes = zfs_dirty_data_max * zfs_vdev_async_write_active_max_dirty_percent / 100; /* * Sync tasks correspond to interactive user actions. To reduce the * execution time of those actions we push data out as fast as possible. */ if (spa_has_pending_synctask(spa)) { return (zfs_vdev_async_write_max_active); } if (dirty < min_bytes) return (zfs_vdev_async_write_min_active); if (dirty > max_bytes) return (zfs_vdev_async_write_max_active); /* * linear interpolation: * slope = (max_writes - min_writes) / (max_bytes - min_bytes) * move right by min_bytes * move up by min_writes */ writes = (dirty - min_bytes) * (zfs_vdev_async_write_max_active - zfs_vdev_async_write_min_active) / (max_bytes - min_bytes) + zfs_vdev_async_write_min_active; ASSERT3U(writes, >=, zfs_vdev_async_write_min_active); ASSERT3U(writes, <=, zfs_vdev_async_write_max_active); return (writes); } static int vdev_queue_class_max_active(spa_t *spa, zio_priority_t p) { switch (p) { case ZIO_PRIORITY_SYNC_READ: return (zfs_vdev_sync_read_max_active); case ZIO_PRIORITY_SYNC_WRITE: return (zfs_vdev_sync_write_max_active); case ZIO_PRIORITY_ASYNC_READ: return (zfs_vdev_async_read_max_active); case ZIO_PRIORITY_ASYNC_WRITE: return (vdev_queue_max_async_writes(spa)); case ZIO_PRIORITY_SCRUB: return (zfs_vdev_scrub_max_active); default: panic("invalid priority %u", p); return (0); } } /* * Return the i/o class to issue from, or ZIO_PRIORITY_MAX_QUEUEABLE if * there is no eligible class. */ static zio_priority_t vdev_queue_class_to_issue(vdev_queue_t *vq) { spa_t *spa = vq->vq_vdev->vdev_spa; zio_priority_t p; if (avl_numnodes(&vq->vq_active_tree) >= zfs_vdev_max_active) return (ZIO_PRIORITY_NUM_QUEUEABLE); /* find a queue that has not reached its minimum # outstanding i/os */ for (p = 0; p < ZIO_PRIORITY_NUM_QUEUEABLE; p++) { if (avl_numnodes(vdev_queue_class_tree(vq, p)) > 0 && vq->vq_class[p].vqc_active < vdev_queue_class_min_active(p)) return (p); } /* * If we haven't found a queue, look for one that hasn't reached its * maximum # outstanding i/os. */ for (p = 0; p < ZIO_PRIORITY_NUM_QUEUEABLE; p++) { if (avl_numnodes(vdev_queue_class_tree(vq, p)) > 0 && vq->vq_class[p].vqc_active < vdev_queue_class_max_active(spa, p)) return (p); } /* No eligible queued i/os */ return (ZIO_PRIORITY_NUM_QUEUEABLE); } /* * Compute the range spanned by two i/os, which is the endpoint of the last * (lio->io_offset + lio->io_size) minus start of the first (fio->io_offset). * Conveniently, the gap between fio and lio is given by -IO_SPAN(lio, fio); * thus fio and lio are adjacent if and only if IO_SPAN(lio, fio) == 0. */ #define IO_SPAN(fio, lio) ((lio)->io_offset + (lio)->io_size - (fio)->io_offset) #define IO_GAP(fio, lio) (-IO_SPAN(lio, fio)) static zio_t * vdev_queue_aggregate(vdev_queue_t *vq, zio_t *zio) { zio_t *first, *last, *aio, *dio, *mandatory, *nio; uint64_t maxgap = 0; uint64_t size; boolean_t stretch = B_FALSE; avl_tree_t *t = vdev_queue_type_tree(vq, zio->io_type); enum zio_flag flags = zio->io_flags & ZIO_FLAG_AGG_INHERIT; if (zio->io_flags & ZIO_FLAG_DONT_AGGREGATE) return (NULL); first = last = zio; if (zio->io_type == ZIO_TYPE_READ) maxgap = zfs_vdev_read_gap_limit; /* * We can aggregate I/Os that are sufficiently adjacent and of * the same flavor, as expressed by the AGG_INHERIT flags. * The latter requirement is necessary so that certain * attributes of the I/O, such as whether it's a normal I/O * or a scrub/resilver, can be preserved in the aggregate. * We can include optional I/Os, but don't allow them * to begin a range as they add no benefit in that situation. */ /* * We keep track of the last non-optional I/O. */ mandatory = (first->io_flags & ZIO_FLAG_OPTIONAL) ? NULL : first; /* * Walk backwards through sufficiently contiguous I/Os * recording the last non-option I/O. */ while ((dio = AVL_PREV(t, first)) != NULL && (dio->io_flags & ZIO_FLAG_AGG_INHERIT) == flags && IO_SPAN(dio, last) <= zfs_vdev_aggregation_limit && IO_GAP(dio, first) <= maxgap) { first = dio; if (mandatory == NULL && !(first->io_flags & ZIO_FLAG_OPTIONAL)) mandatory = first; } /* * Skip any initial optional I/Os. */ while ((first->io_flags & ZIO_FLAG_OPTIONAL) && first != last) { first = AVL_NEXT(t, first); ASSERT(first != NULL); } /* * Walk forward through sufficiently contiguous I/Os. */ while ((dio = AVL_NEXT(t, last)) != NULL && (dio->io_flags & ZIO_FLAG_AGG_INHERIT) == flags && IO_SPAN(first, dio) <= zfs_vdev_aggregation_limit && IO_GAP(last, dio) <= maxgap) { last = dio; if (!(last->io_flags & ZIO_FLAG_OPTIONAL)) mandatory = last; } /* * Now that we've established the range of the I/O aggregation * we must decide what to do with trailing optional I/Os. * For reads, there's nothing to do. While we are unable to * aggregate further, it's possible that a trailing optional * I/O would allow the underlying device to aggregate with * subsequent I/Os. We must therefore determine if the next * non-optional I/O is close enough to make aggregation * worthwhile. */ if (zio->io_type == ZIO_TYPE_WRITE && mandatory != NULL) { zio_t *nio = last; while ((dio = AVL_NEXT(t, nio)) != NULL && IO_GAP(nio, dio) == 0 && IO_GAP(mandatory, dio) <= zfs_vdev_write_gap_limit) { nio = dio; if (!(nio->io_flags & ZIO_FLAG_OPTIONAL)) { stretch = B_TRUE; break; } } } if (stretch) { /* This may be a no-op. */ dio = AVL_NEXT(t, last); dio->io_flags &= ~ZIO_FLAG_OPTIONAL; } else { while (last != mandatory && last != first) { ASSERT(last->io_flags & ZIO_FLAG_OPTIONAL); last = AVL_PREV(t, last); ASSERT(last != NULL); } } if (first == last) return (NULL); size = IO_SPAN(first, last); ASSERT3U(size, <=, zfs_vdev_aggregation_limit); aio = zio_vdev_delegated_io(first->io_vd, first->io_offset, zio_buf_alloc(size), size, first->io_type, zio->io_priority, flags | ZIO_FLAG_DONT_CACHE | ZIO_FLAG_DONT_QUEUE, vdev_queue_agg_io_done, NULL); aio->io_timestamp = first->io_timestamp; nio = first; do { dio = nio; nio = AVL_NEXT(t, dio); ASSERT3U(dio->io_type, ==, aio->io_type); if (dio->io_flags & ZIO_FLAG_NODATA) { ASSERT3U(dio->io_type, ==, ZIO_TYPE_WRITE); bzero((char *)aio->io_data + (dio->io_offset - aio->io_offset), dio->io_size); } else if (dio->io_type == ZIO_TYPE_WRITE) { bcopy(dio->io_data, (char *)aio->io_data + (dio->io_offset - aio->io_offset), dio->io_size); } zio_add_child(dio, aio); vdev_queue_io_remove(vq, dio); zio_vdev_io_bypass(dio); zio_execute(dio); } while (dio != last); return (aio); } static zio_t * vdev_queue_io_to_issue(vdev_queue_t *vq) { zio_t *zio, *aio; zio_priority_t p; avl_index_t idx; avl_tree_t *tree; zio_t search; again: ASSERT(MUTEX_HELD(&vq->vq_lock)); p = vdev_queue_class_to_issue(vq); if (p == ZIO_PRIORITY_NUM_QUEUEABLE) { /* No eligible queued i/os */ return (NULL); } /* * For LBA-ordered queues (async / scrub), issue the i/o which follows * the most recently issued i/o in LBA (offset) order. * * For FIFO queues (sync), issue the i/o with the lowest timestamp. */ tree = vdev_queue_class_tree(vq, p); search.io_timestamp = 0; search.io_offset = vq->vq_last_offset + 1; VERIFY3P(avl_find(tree, &search, &idx), ==, NULL); zio = avl_nearest(tree, idx, AVL_AFTER); if (zio == NULL) zio = avl_first(tree); ASSERT3U(zio->io_priority, ==, p); aio = vdev_queue_aggregate(vq, zio); if (aio != NULL) zio = aio; else vdev_queue_io_remove(vq, zio); /* * If the I/O is or was optional and therefore has no data, we need to * simply discard it. We need to drop the vdev queue's lock to avoid a * deadlock that we could encounter since this I/O will complete * immediately. */ if (zio->io_flags & ZIO_FLAG_NODATA) { mutex_exit(&vq->vq_lock); zio_vdev_io_bypass(zio); zio_execute(zio); mutex_enter(&vq->vq_lock); goto again; } vdev_queue_pending_add(vq, zio); vq->vq_last_offset = zio->io_offset; return (zio); } zio_t * vdev_queue_io(zio_t *zio) { vdev_queue_t *vq = &zio->io_vd->vdev_queue; zio_t *nio; if (zio->io_flags & ZIO_FLAG_DONT_QUEUE) return (zio); /* * Children i/os inherent their parent's priority, which might * not match the child's i/o type. Fix it up here. */ if (zio->io_type == ZIO_TYPE_READ) { if (zio->io_priority != ZIO_PRIORITY_SYNC_READ && zio->io_priority != ZIO_PRIORITY_ASYNC_READ && zio->io_priority != ZIO_PRIORITY_SCRUB) zio->io_priority = ZIO_PRIORITY_ASYNC_READ; } else { ASSERT(zio->io_type == ZIO_TYPE_WRITE); if (zio->io_priority != ZIO_PRIORITY_SYNC_WRITE && zio->io_priority != ZIO_PRIORITY_ASYNC_WRITE) zio->io_priority = ZIO_PRIORITY_ASYNC_WRITE; } zio->io_flags |= ZIO_FLAG_DONT_CACHE | ZIO_FLAG_DONT_QUEUE; mutex_enter(&vq->vq_lock); zio->io_timestamp = gethrtime(); vdev_queue_io_add(vq, zio); nio = vdev_queue_io_to_issue(vq); mutex_exit(&vq->vq_lock); if (nio == NULL) return (NULL); if (nio->io_done == vdev_queue_agg_io_done) { zio_nowait(nio); return (NULL); } return (nio); } void vdev_queue_io_done(zio_t *zio) { vdev_queue_t *vq = &zio->io_vd->vdev_queue; zio_t *nio; if (zio_injection_enabled) delay(SEC_TO_TICK(zio_handle_io_delay(zio))); mutex_enter(&vq->vq_lock); vdev_queue_pending_remove(vq, zio); vq->vq_io_complete_ts = gethrtime(); while ((nio = vdev_queue_io_to_issue(vq)) != NULL) { mutex_exit(&vq->vq_lock); if (nio->io_done == vdev_queue_agg_io_done) { zio_nowait(nio); } else { zio_vdev_io_reissue(nio); zio_execute(nio); } mutex_enter(&vq->vq_lock); } mutex_exit(&vq->vq_lock); }