'\" te
.\" Copyright (c) 2009, Sun Microsystems, Inc.  All Rights Reserved.
.\" Copyright 1989 AT&T
.\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
.\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
.\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
.TH STREAMIO 7I "Apr 8, 2009"
.SH NAME
streamio \- STREAMS ioctl commands
.SH SYNOPSIS
.LP
.nf
#include <sys/types.h>
#include <stropts.h>
#include <sys/conf.h>

\fBint\fR \fBioctl\fR(\fBint\fR \fIfildes\fR, \fBint\fR \fIcommand\fR, \fB\&... /*arg*/\fR);
.fi

.SH DESCRIPTION
.sp
.LP
STREAMS (see \fBIntro\fR(3)) \fBioctl\fR commands are a subset of the
\fBioctl\fR(2) commands and perform a variety of control functions on streams.
.sp
.LP
The \fIfildes\fR argument is an open file descriptor that refers to a stream.
The \fIcommand\fR argument determines the control function to be performed as
described below. The \fIarg\fR argument represents additional information that
is needed by this command. The type of \fIarg\fR depends upon the command, but
it is generally an integer or a pointer to a command-specific data structure.
The \fIcommand\fR and \fIarg\fR arguments are interpreted by the STREAM head.
Certain combinations of these arguments may be passed to a module or driver in
the stream.
.sp
.LP
Since these STREAMS commands are \fBioctls\fR, they are subject to the errors
described in \fBioctl\fR(2). In addition to those errors, the call will fail
with \fBerrno\fR set to \fBEINVAL,\fR without processing a control function, if
the STREAM referenced by \fIfildes\fR is linked below a multiplexor, or if
\fIcommand\fR is not a valid value for a stream.
.sp
.LP
Also, as described in \fBioctl\fR(2), STREAMS modules and drivers can detect
errors. In this case, the module or driver sends an error message to the STREAM
head containing an error value. This causes subsequent calls to fail with
\fBerrno\fR set to this value.
.SH IOCTLS
.sp
.LP
The following \fBioctl\fR commands, with error values indicated, are applicable
to all STREAMS files:
.sp
.ne 2
.na
\fB\fBI_PUSH\fR\fR
.ad
.RS 15n
Pushes the module whose name is pointed to by \fIarg\fR onto the top of the
current stream, just below the STREAM head. If the STREAM is a pipe, the module
will be inserted between the stream heads of both ends of the pipe. It then
calls the open routine of the newly-pushed module. On failure, \fBerrno\fR is
set to one of the following values:
.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 11n
Invalid module name.
.RE

.sp
.ne 2
.na
\fB\fBEFAULT\fR\fR
.ad
.RS 11n
\fIarg\fR points outside the allocated address space.
.RE

.sp
.ne 2
.na
\fB\fBENXIO\fR\fR
.ad
.RS 11n
Open routine of new module failed.
.RE

.sp
.ne 2
.na
\fB\fBENXIO\fR\fR
.ad
.RS 11n
Hangup received on \fIfildes\fR.
.RE

.sp
.ne 2
.na
\fB\fBENOTSUP\fR\fR
.ad
.RS 11n
Pushing a module is not supported on this stream.
.RE

.RE

.sp
.ne 2
.na
\fB\fBI_POP\fR\fR
.ad
.RS 15n
Removes the module just below the STREAM head of the STREAM pointed to by
\fIfildes\fR. To remove a module from a pipe requires that the module was
pushed on the side it is being removed from. \fIarg\fR should be  \fB0\fR in an
\fBI_POP\fR request. On failure, \fBerrno\fR is set to one of the following
values:
.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 11n
No module present in the stream.
.RE

.sp
.ne 2
.na
\fB\fBENXIO\fR\fR
.ad
.RS 11n
Hangup received on \fIfildes\fR.
.RE

.sp
.ne 2
.na
\fB\fBEPERM\fR\fR
.ad
.RS 11n
Attempt to pop through an anchor by an unprivileged process.
.RE

.sp
.ne 2
.na
\fB\fBENOTSUP\fR\fR
.ad
.RS 11n
Removal is not supported.
.RE

.RE

.sp
.ne 2
.na
\fB\fBI_ANCHOR\fR\fR
.ad
.RS 15n
Positions the stream anchor to be at the stream's module directly below the
stream head. Once this has been done, only a privileged process may pop modules
below the anchor on the stream. \fIarg\fR must be \fB0\fR in an \fBI_ANCHOR\fR
request. On failure, \fBerrno\fR is set to the following value:
.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 10n
Request to put an anchor on a pipe.
.RE

.RE

.sp
.ne 2
.na
\fB\fBI_LOOK\fR\fR
.ad
.RS 15n
Retrieves the name of the module just below the stream head of the stream
pointed to by \fIfildes\fR, and places it in a null terminated character string
pointed at by \fIarg\fR. The buffer pointed to by \fIarg\fR should be at least
\fBFMNAMESZ\fR+1 bytes long. This requires the declaration \fB#include
<sys/conf.h>\fR. On failure, \fBerrno\fR is set to one of the following values:
.sp
.ne 2
.na
\fB\fBEFAULT\fR\fR
.ad
.RS 10n
\fIarg\fR points outside the allocated address space.
.RE

.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 10n
No module present in stream.
.RE

.RE

.sp
.ne 2
.na
\fB\fBI_FLUSH\fR\fR
.ad
.RS 15n
This request flushes all input and/or output queues, depending on the value of
\fIarg\fR. Legal \fIarg\fR values are:
.sp
.ne 2
.na
\fBFLUSHR\fR
.ad
.RS 11n
Flush read queues.
.RE

.sp
.ne 2
.na
\fBFLUSHW\fR
.ad
.RS 11n
Flush write queues.
.RE

.sp
.ne 2
.na
\fBFLUSHRW\fR
.ad
.RS 11n
Flush read and write queues.
.RE

If a pipe or FIFO does not have any modules pushed, the read queue of the
stream head on either end is flushed depending on the value of \fIarg\fR.
.sp
If \fBFLUSHR\fR is set and \fIfildes\fR is a pipe, the read queue for that end
of the pipe is flushed and the write queue for the other end is flushed. If
\fIfildes\fR is a FIFO, both queues are flushed.
.sp
If \fBFLUSHW\fR is set and \fIfildes\fR is a pipe and the other end of the pipe
exists, the read queue for the other end of the pipe is flushed and the write
queue for this end is flushed. If \fIfildes\fR is a FIFO, both queues of the
FIFO are flushed.
.sp
If \fBFLUSHRW\fR is set, all read queues are flushed, that is, the read queue
for the FIFO and the read queue on both ends of the pipe are flushed.
.sp
Correct flush handling of a pipe or FIFO with modules pushed is achieved via
the \fBpipemod\fR module.  This module should be the first module pushed onto a
pipe so that it is at the midpoint of the pipe itself.
.sp
On failure, \fBerrno\fR is set to one of the following values:
.sp
.ne 2
.na
\fB\fBENOSR\fR\fR
.ad
.RS 10n
Unable to allocate buffers for flush message due to insufficient stream memory
resources.
.RE

.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 10n
Invalid \fIarg\fR value.
.RE

.sp
.ne 2
.na
\fB\fBENXIO\fR\fR
.ad
.RS 10n
Hangup received on \fIfildes\fR.
.RE

.RE

.sp
.ne 2
.na
\fB\fBI_FLUSHBAND\fR\fR
.ad
.RS 15n
Flushes a particular band of messages. \fIarg\fR points to a \fBbandinfo\fR
structure that has the following members:
.sp
.in +2
.nf
unsigned char bi_pri;
int bi_flag;
.fi
.in -2

The \fBbi_flag\fR field may be one of \fBFLUSHR\fR, \fBFLUSHW\fR, or
\fBFLUSHRW\fR as described earlier.
.RE

.sp
.ne 2
.na
\fB\fBI_SETSIG\fR\fR
.ad
.RS 15n
Informs the stream head that the user wishes the kernel to issue the
\fBSIGPOLL\fR signal (see \fBsignal\fR(3C)) when a particular event has
occurred on the stream associated with \fIfildes\fR. \fBI_SETSIG\fR supports an
asynchronous processing capability in streams. The value of \fIarg\fR is a
bitmask that specifies the events for which the user should be signaled. It is
the bitwise OR of any combination of the following constants:
.sp
.ne 2
.na
\fB\fBS_INPUT\fR\fR
.ad
.RS 13n
Any message other than an \fBM_PCPROTO\fR has arrived on a stream head read
queue. This event is maintained for compatibility with previous releases. This
event is triggered even if the message is of zero length.
.RE

.sp
.ne 2
.na
\fB\fBS_RDNORM\fR\fR
.ad
.RS 13n
An ordinary (non-priority) message has arrived on a stream head read queue.
This event is triggered even if the message is of zero length.
.RE

.sp
.ne 2
.na
\fB\fBS_RDBAND\fR\fR
.ad
.RS 13n
A priority band message (band > 0) has arrived on a stream head read queue.
This event is triggered even if the message is of zero length.
.RE

.sp
.ne 2
.na
\fB\fBS_HIPRI\fR\fR
.ad
.RS 13n
A high priority message is present on the stream head read queue. This event is
triggered even if the message is of zero length.
.RE

.sp
.ne 2
.na
\fB\fBS_OUTPUT\fR\fR
.ad
.RS 13n
The write queue just below the stream head is no longer full. This notifies the
user that there is room on the queue for sending (or writing) data downstream.
.RE

.sp
.ne 2
.na
\fB\fBS_WRNORM\fR\fR
.ad
.RS 13n
This event is the same as \fBS_OUTPUT\fR.
.RE

.sp
.ne 2
.na
\fB\fBS_WRBAND\fR\fR
.ad
.RS 13n
A priority band greater than 0 of a queue downstream exists and is writable.
This notifies the user that there is room on the queue for sending (or writing)
priority data downstream.
.RE

.sp
.ne 2
.na
\fB\fBS_MSG\fR\fR
.ad
.RS 13n
A STREAMS signal message that contains the \fBSIGPOLL\fR signal has reached the
front of the stream head read queue.
.RE

.sp
.ne 2
.na
\fB\fBS_ERROR\fR\fR
.ad
.RS 13n
An \fBM_ERROR\fR message has reached the stream head.
.RE

.sp
.ne 2
.na
\fB\fBS_HANGUP\fR\fR
.ad
.RS 13n
An \fBM_HANGUP\fR message has reached the stream head.
.RE

.sp
.ne 2
.na
\fB\fBS_BANDURG\fR\fR
.ad
.RS 13n
When used in conjunction with \fBS_RDBAND\fR, \fBSIGURG\fR is generated instead
of \fBSIGPOLL\fR when a priority message reaches the front of the stream head
read queue.
.RE

A user process may choose to be signaled only of high priority messages by
setting the \fIarg\fR bitmask to the value \fBS_HIPRI\fR.
.sp
Processes that wish to receive \fBSIGPOLL\fR signals must explicitly register
to receive them using \fBI_SETSIG\fR. If several processes register to receive
this signal for the same event on the same stream, each process will be
signaled when the event occurs.
.sp
If the value of \fIarg\fR is zero, the calling process will be unregistered and
will not receive further \fBSIGPOLL\fR signals.  On failure, \fBerrno\fR is set
to one of the following values:
.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 10n
\fIarg\fR value is invalid or \fIarg\fR is zero and process is not registered
to receive the \fBSIGPOLL\fR signal.
.RE

.sp
.ne 2
.na
\fB\fBEAGAIN\fR\fR
.ad
.RS 10n
Allocation of a data structure to store the signal request failed.
.RE

.RE

.sp
.ne 2
.na
\fB\fBI_GETSIG\fR\fR
.ad
.RS 15n
Returns the events for which the calling process is currently registered to be
sent a \fBSIGPOLL\fR signal.  The events are returned as a bitmask pointed to
by \fIarg\fR, where the events are those specified in the description of
\fBI_SETSIG\fR above. On failure, \fBerrno\fR is set to one of the following
values:
.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 10n
Process not registered to receive the \fBSIGPOLL\fR signal.
.RE

.sp
.ne 2
.na
\fB\fBEFAULT\fR\fR
.ad
.RS 10n
\fIarg\fR points outside the allocated address space.
.RE

.RE

.sp
.ne 2
.na
\fB\fBI_FIND\fR\fR
.ad
.RS 15n
Compares the names of all modules currently present in the stream to the name
pointed to by \fIarg\fR, and returns 1 if the named module is present in the
stream. It returns 0 if the named module is not present. On failure,
\fBerrno\fR is set to one of the following values:
.sp
.ne 2
.na
\fB\fBEFAULT\fR\fR
.ad
.RS 10n
\fIarg\fR points outside the allocated address space.
.RE

.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 10n
\fIarg\fR does not contain a valid module name.
.RE

.RE

.sp
.ne 2
.na
\fB\fBI_PEEK\fR\fR
.ad
.RS 15n
Allows a user to retrieve the information in the first message on the stream
head read queue without taking the message off the queue. \fBI_PEEK\fR is
analogous to \fBgetmsg\fR(2) except that it does not remove the message from
the queue. \fIarg\fR points to a \fBstrpeek\fR structure, which contains the
following members:
.sp
.in +2
.nf
struct strbuf ctlbuf;
struct strbuf	databuf;
long flags;
.fi
.in -2

The \fBmaxlen\fR field in the \fBctlbuf\fR and \fBdatabuf\fR \fBstrbuf\fR
structures (see \fBgetmsg\fR(2)) must be set to the number of bytes of control
information and/or data information, respectively, to retrieve. \fBflags\fR may
be set to \fBRS_HIPRI\fR or \fB0\fR. If \fBRS_HIPRI\fR is set, \fBI_PEEK\fR
will look for a high priority message on the stream head read queue. Otherwise,
\fBI_PEEK\fR will look for the first message on the stream head read queue.
.sp
\fBI_PEEK\fR returns \fB1\fR if a message was retrieved, and returns \fB0\fR if
no message was found on the stream head read queue. It does not wait for a
message to arrive. On return, \fBctlbuf\fR specifies information in the control
buffer, \fBdatabuf\fR specifies information in the data buffer, and \fBflags\fR
contains the value \fBRS_HIPRI\fR or \fB0\fR. On failure, \fBerrno\fR is set to
the following value:
.sp
.ne 2
.na
\fB\fBEFAULT\fR\fR
.ad
.RS 11n
\fIarg\fR points, or the buffer area specified in \fBctlbuf\fR or \fBdatabuf\fR
is, outside the allocated address space.
.RE

.sp
.ne 2
.na
\fB\fBEBADMSG\fR\fR
.ad
.RS 11n
Queued message to be read is not valid for \fBI_PEEK\fR.
.RE

.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 11n
Illegal value for \fBflags\fR.
.RE

.sp
.ne 2
.na
\fB\fBENOSR\fR\fR
.ad
.RS 11n
Unable to allocate buffers to perform the I_PEEK due to insufficient STREAMS
memory resources.
.RE

.RE

.sp
.ne 2
.na
\fB\fBI_SRDOPT\fR\fR
.ad
.RS 15n
Sets the read mode (see \fBread\fR(2)) using the value of the argument
\fIarg\fR. Legal \fIarg\fR values are:
.sp
.ne 2
.na
\fBRNORM\fR
.ad
.RS 9n
Byte-stream mode, the default.
.RE

.sp
.ne 2
.na
\fBRMSGD\fR
.ad
.RS 9n
Message-discard mode.
.RE

.sp
.ne 2
.na
\fBRMSGN\fR
.ad
.RS 9n
Message-nondiscard mode.
.RE

In addition, the stream head's treatment of control messages may be changed by
setting the following flags in \fIarg\fR:
.sp
.ne 2
.na
\fBRPROTNORM\fR
.ad
.RS 13n
Reject \fBread()\fR with \fBEBADMSG\fR if a control message is at the front of
the stream head read queue.
.RE

.sp
.ne 2
.na
\fBRPROTDAT\fR
.ad
.RS 13n
Deliver the control portion of a message as data when a user issues
\fBread()\fR. This is the default behavior.
.RE

.sp
.ne 2
.na
\fBRPROTDIS\fR
.ad
.RS 13n
Discard the control portion of a message, delivering any data portion, when a
user issues a \fBread\fR(\|).
.RE

On failure, \fBerrno\fR is set to the following value:
.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 10n
\fIarg\fR is not one of the above legal values, or \fIarg\fR is the bitwise
inclusive \fBOR\fR of \fBRMSGD\fR and \fBRMSGN\fR.
.RE

.RE

.sp
.ne 2
.na
\fB\fBI_GRDOPT\fR\fR
.ad
.RS 15n
Returns the current read mode setting in an \fBint\fR pointed to by the
argument \fIarg\fR. Read modes are described in \fBread\fR(\|). On failure,
\fBerrno\fR is set to the following value:
.sp
.ne 2
.na
\fB\fBEFAULT\fR\fR
.ad
.RS 10n
\fIarg\fR points outside the allocated address space.
.RE

.RE

.sp
.ne 2
.na
\fB\fBI_NREAD\fR\fR
.ad
.RS 15n
Counts the number of data bytes in data blocks in the first message on the
stream head read queue, and places this value in the location pointed to by
\fIarg\fR. The return value for the command is the number of messages on the
stream head read queue. For example, if zero is returned in \fIarg\fR, but the
\fBioctl\fR return value is greater than zero, this indicates that a
zero-length message is next on the queue. On failure, \fBerrno\fR is set to the
following value:
.sp
.ne 2
.na
\fB\fBEFAULT\fR\fR
.ad
.RS 10n
\fIarg\fR points outside the allocated address space.
.RE

.RE

.sp
.ne 2
.na
\fB\fBI_FDINSERT\fR\fR
.ad
.RS 15n
Creates a message from specified buffer(s), adds information about another
stream and sends the message downstream. The message contains a control part
and an optional data part. The data and control parts to be sent are
distinguished by placement in separate buffers, as described below.
.sp
The \fIarg\fR argument points to a \fBstrfdinsert\fR structure, which contains
the following members:
.sp
.in +2
.nf
struct  strbuf  ctlbuf;
struct  strbuf	databuf;
t_uscalar_t  flags;
int  fildes;
int  offset;
.fi
.in -2

The \fBlen\fR member in the \fBctlbuf strbuf\fR structure (see \fBputmsg\fR(2))
must be set to the size of a  \fBt_uscalar_t\fR plus the number of bytes of
control information to be sent with the message. The \fBfildes\fR member
specifies the file descriptor of the other stream, and the \fBoffset\fR member,
which must be suitably aligned for use as a \fBt_uscalar_t\fR, specifies the
offset from the start of the control buffer where \fBI_FDINSERT\fR will store a
\fBt_uscalar_t\fR whose interpretation is specific to the stream end. The
\fBlen\fR member in the \fBdatabuf strbuf\fR structure must be set to the
number of bytes of data information to be sent with the message, or to 0 if no
data part is to be sent.
.sp
The \fBflags\fR member specifies the type of message to be created. A normal
message is created if \fBflags\fR is set to 0, and a high-priority message is
created if \fBflags\fR is set to \fBRS_HIPRI\fR. For non-priority messages,
\fBI_FDINSERT\fR will block if the stream write queue is full due to internal
flow control conditions. For priority messages,  \fBI_FDINSERT\fR does not
block on this condition. For non-priority messages,  \fBI_FDINSERT\fR does not
block when the write queue is full and  \fBO_NDELAY\fR or  \fBO_NONBLOCK\fR is
set. Instead, it fails and sets \fBerrno\fR to \fBEAGAIN\fR.
.sp
\fBI_FDINSERT\fR also blocks, unless prevented by lack of internal resources,
waiting for the availability of message blocks in the stream, regardless of
priority or whether \fBO_NDELAY\fR or \fBO_NONBLOCK\fR has been specified. No
partial message is sent.
.sp
The \fBioctl()\fR function with the \fBI_FDINSERT\fR command will fail if:
.sp
.ne 2
.na
\fB\fBEAGAIN\fR\fR
.ad
.RS 10n
A non-priority message is specified, the \fBO_NDELAY\fR or \fBO_NONBLOCK\fR
flag is set, and the stream write queue is full due to internal flow control
conditions.
.RE

.sp
.ne 2
.na
\fB\fBENOSR\fR\fR
.ad
.RS 10n
Buffers can not be allocated for the message that is to be created.
.RE

.sp
.ne 2
.na
\fB\fBEFAULT\fR\fR
.ad
.RS 10n
The \fIarg\fR argument points, or the buffer area specified in \fBctlbuf\fR or
\fBdatabuf\fR is, outside the allocated address space.
.RE

.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 10n
One of the following: The \fBfildes\fR member of the \fBstrfdinsert\fR
structure is not a valid, open stream file descriptor; the size of a
\fBt_uscalar_t\fR plus \fBoffset\fR is greater than the \fBlen\fR member for
the buffer specified through \fBctlptr\fR; the \fBoffset\fR member does not
specify a properly-aligned location in the data buffer; or an undefined value
is stored in \fBflags\fR.
.RE

.sp
.ne 2
.na
\fB\fBENXIO\fR\fR
.ad
.RS 10n
Hangup received on the \fBfildes\fR argument of the \fBioctl\fR call or the
\fBfildes\fR member of the \fBstrfdinsert\fR structure.
.RE

.sp
.ne 2
.na
\fB\fBERANGE\fR\fR
.ad
.RS 10n
The \fBlen\fR field for the buffer specified through \fBdatabuf\fR does not
fall within the range specified by the maximum and minimum packet sizes of the
topmost stream module; or the \fBlen\fR member for the buffer specified through
\fBdatabuf\fR is larger than the maximum configured size of the data part of a
message; or the \fBlen\fR member for the buffer specified through \fBctlbuf\fR
is larger than the maximum configured size of the control part of a message.
.RE

\fBI_FDINSERT\fR can also fail if an error message was received by the stream
head of the stream corresponding to the \fBfildes\fR member of the
\fBstrfdinsert\fR structure. In this case, \fBerrno\fR will be set to the value
in the message.
.RE

.sp
.ne 2
.na
\fB\fBI_STR\fR\fR
.ad
.RS 15n
Constructs an internal \fBSTREAMS\fR ioctl message from the data pointed to by
\fIarg\fR, and sends that message downstream.
.sp
This mechanism is provided to send user \fBioctl\fR requests to downstream
modules and drivers. It allows information to be sent with the \fBioctl\fR, and
will return to the user any information sent upstream by the downstream
recipient. \fBI_STR\fR blocks until the system responds with either a positive
or negative acknowledgement message, or until the request times out after some
period of time. If the request times out, it fails with \fBerrno\fR set to
\fBETIME\fR.
.sp
To send requests downstream, \fIarg\fR must point to a \fBstrioctl\fR structure
which contains the following members:
.sp
.in +2
.nf
int  ic_cmd;
int  ic_timout;
int  ic_len;
char  *ic_dp;
.fi
.in -2

\fBic_cmd\fR is the internal \fBioctl\fR command intended for a downstream
module or driver and \fBic_timout\fR is the number of seconds (-1 = infinite, 0
= use default, >0 = as specified) an \fBI_STR\fR request will wait for
acknowledgement before timing out. \fBic_len\fR is the number of bytes in the
data argument and \fBic_dp\fR is a pointer to the data argument. The
\fBic_len\fR field has two uses: on input, it contains the length of the data
argument passed in, and on return from the command, it contains the number of
bytes being returned to the user (the buffer pointed to by \fBic_dp\fR should
be large enough to contain the maximum amount of data that any module or the
driver in the stream can return).
.sp
At most one \fBI_STR\fR can be active on a stream.  Further \fBI_STR\fR calls
will block until the active \fBI_STR\fR completes via  a  positive  or negative
acknowlegment, a timeout, or an error condition at the stream head.  By setting
the \fBic_timout\fR  field  to  0, the  user is requesting STREAMS to provide
the  \fBDEFAULT\fR timeout. The default timeout is specific to the STREAMS
implementation and may vary depending on which release of Solaris you are
using. For Solaris 8 (and earlier versions), the default timeout is fifteen
seconds. The \fBO_NDELAY\fR and \fBO_NONBLOCK\fR (see \fBopen\fR(2)) flags have
no effect on this call.
.sp
The stream head will convert the information pointed to by the \fBstrioctl\fR
structure to an internal \fBioctl\fR command message and send it downstream. On
failure, \fBerrno\fR is set to one of the following values:
.sp
.ne 2
.na
\fB\fBENOSR\fR\fR
.ad
.RS 10n
Unable to allocate buffers for the \fBioctl\fR message due to insufficient
STREAMS memory resources.
.RE

.sp
.ne 2
.na
\fB\fBEFAULT\fR\fR
.ad
.RS 10n
Either \fIarg\fR points outside the allocated address space, or the buffer area
specified by \fBic_dp\fR and \fBic_len\fR (separately for data sent and data
returned) is outside the allocated address space.
.RE

.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 10n
\fBic_len\fR is less than 0 or \fBic_len\fR is larger than the maximum
configured size of the data part of a message or \fBic_timout\fR is less than
-1.
.RE

.sp
.ne 2
.na
\fB\fBENXIO\fR\fR
.ad
.RS 10n
Hangup received on \fIfildes\fR.
.RE

.sp
.ne 2
.na
\fB\fBETIME\fR\fR
.ad
.RS 10n
A downstream \fBioctl\fR timed out before acknowledgement was received.
.RE

An \fBI_STR\fR can also fail while waiting for an acknowledgement if a message
indicating an error or a hangup is received at the stream head. In addition, an
error code can be returned in the positive or negative acknowledgement message,
in the event the ioctl command sent downstream fails. For these cases,
\fBI_STR\fR will fail with \fBerrno\fR set to the value in the message.
.RE

.sp
.ne 2
.na
\fB\fBI_SWROPT\fR\fR
.ad
.RS 15n
Sets the write mode using the value of the argument \fIarg\fR. Legal bit
settings for \fIarg\fR are:
.sp
.ne 2
.na
\fB\fBSNDZERO\fR\fR
.ad
.RS 11n
Send a zero-length message downstream when a write of 0 bytes occurs.
.RE

To not send a zero-length message when a write of 0 bytes occurs, this bit must
not be set in \fIarg\fR.
.sp
On failure, \fBerrno\fR may be set to the following value:
.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 10n
\fIarg\fR is not the above legal value.
.RE

.RE

.sp
.ne 2
.na
\fB\fBI_GWROPT\fR\fR
.ad
.RS 15n
Returns the current write mode setting, as described above, in the \fBint\fR
that is pointed to by the argument \fIarg\fR.
.RE

.sp
.ne 2
.na
\fB\fBI_SENDFD\fR\fR
.ad
.RS 15n
Requests the stream associated with \fIfildes\fR to send a message, containing
a file pointer, to the stream head at the other end of a stream pipe. The file
pointer corresponds to \fIarg\fR, which must be an open file descriptor.
.sp
\fBI_SENDFD\fR converts \fIarg\fR into the corresponding system file pointer.
It allocates a message block and inserts the file pointer in the block.  The
user id and group id associated with the sending process are also inserted.
This message is placed directly on the read queue (see \fBIntro\fR(3)) of the
stream head at the other end of the stream pipe to which it is connected.  On
failure, \fBerrno\fR is set to one of the following values:
.sp
.ne 2
.na
\fB\fBEAGAIN\fR\fR
.ad
.RS 10n
The sending stream is unable to allocate a message block to contain the file
pointer.
.RE

.sp
.ne 2
.na
\fB\fBEAGAIN\fR\fR
.ad
.RS 10n
The read queue of the receiving stream head is full and cannot accept the
message sent by \fBI_SENDFD.\fR
.RE

.sp
.ne 2
.na
\fB\fBEBADF\fR\fR
.ad
.RS 10n
\fIarg\fR is not a valid, open file descriptor.
.RE

.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 10n
\fIfildes\fR is not connected to a stream pipe.
.RE

.sp
.ne 2
.na
\fB\fBENXIO\fR\fR
.ad
.RS 10n
Hangup received on \fIfildes\fR.
.RE

.RE

.sp
.ne 2
.na
\fB\fBI_RECVFD\fR\fR
.ad
.RS 15n
Retrieves the file descriptor associated with the message sent by an
\fBI_SENDFD\fR \fBioctl\fR over a stream pipe. \fIarg\fR is a pointer to a data
buffer large enough to hold an \fBstrrecvfd\fR data structure containing the
following members:
.sp
.in +2
.nf
int  fd;
uid_t  uid;
gid_t  gid;
.fi
.in -2

\fBfd\fR is an integer file descriptor. \fBuid\fR and \fBgid\fR are the user id
and group id, respectively, of the sending stream.
.sp
If \fBO_NDELAY\fR and \fBO_NONBLOCK\fR are clear (see \fBopen\fR(2)),
\fBI_RECVFD\fR will block until a message is present at the stream head. If
\fBO_NDELAY\fR or \fBO_NONBLOCK\fR is set, \fBI_RECVFD\fR will fail with
\fBerrno\fR set to \fBEAGAIN\fR if no message is present at the stream head.
.sp
If the message at the stream head is a message sent by an \fBI_SENDFD\fR, a new
user file descriptor is allocated for the file pointer contained in the
message. The new file descriptor is placed in the \fBfd\fR field of the
\fBstrrecvfd\fR structure. The structure is copied into the user data buffer
pointed to by \fIarg\fR. On failure, \fBerrno\fR is set to one of the following
values:
.sp
.ne 2
.na
\fB\fBEAGAIN\fR\fR
.ad
.RS 13n
A message is not present at the stream head read queue, and the \fBO_NDELAY\fR
or \fBO_NONBLOCK\fR flag is set.
.RE

.sp
.ne 2
.na
\fB\fBEBADMSG\fR\fR
.ad
.RS 13n
The message at the stream head read queue is not a message containing a passed
file descriptor.
.RE

.sp
.ne 2
.na
\fB\fBEFAULT\fR\fR
.ad
.RS 13n
\fIarg\fR points outside the allocated address space.
.RE

.sp
.ne 2
.na
\fB\fBEMFILE\fR\fR
.ad
.RS 13n
\fBNOFILES\fR file descriptors are currently open.
.RE

.sp
.ne 2
.na
\fB\fBENXIO\fR\fR
.ad
.RS 13n
Hangup received on \fIfildes\fR.
.RE

.sp
.ne 2
.na
\fB\fBEOVERFLOW\fR\fR
.ad
.RS 13n
\fIuid\fR or \fIgid\fR is too large to be stored in the structure pointed to by
\fIarg\fR.
.RE

.RE

.sp
.ne 2
.na
\fB\fBI_LIST\fR\fR
.ad
.RS 15n
Allows the user to list all the module names on the stream, up to and including
the topmost driver name. If \fIarg\fR is \fINULL\fR, the return value is the
number of modules, including the driver, that are on the stream pointed to by
\fIfildes\fR. This allows the user to allocate enough space for the module
names. If \fIarg\fR is non-null, it should point to an \fBstr_list\fR structure
that has the following members:
.sp
.in +2
.nf
int sl_nmods;
struct  str_mlist  *sl_modlist;
.fi
.in -2

The \fBstr_mlist\fR structure has the following member:
.sp
.in +2
.nf
char l_name[FMNAMESZ+1];
.fi
.in -2

The \fBsl_nmods\fR member indicates the number of entries the process has
allocated in the array.  Upon return, the \fBsl_modlist\fR member of the
\fBstr_list\fR structure contains the list of module names, and the number of
entries that have been filled into the \fBsl_modlist\fR array is found in the
\fBsl_nmods\fR member (the number includes the number of modules including the
driver).  The return value from \fBioctl()\fR is 0.  The entries are filled in
starting at the top of the stream and continuing downstream until either the
end of the stream is reached, or the number of requested modules
(\fBsl_nmods\fR) is satisfied. On failure, \fBerrno\fR may be set to one of the
following values:
.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 10n
The \fBsl_nmods\fR member is less than 1.
.RE

.sp
.ne 2
.na
\fB\fBEAGAIN\fR\fR
.ad
.RS 10n
Unable to allocate buffers
.RE

.RE

.sp
.ne 2
.na
\fB\fBI_ATMARK\fR\fR
.ad
.RS 15n
Allows the user to see if the current message on the stream head read queue is
``marked'' by some module downstream. \fIarg\fR determines how the checking is
done when there may be multiple marked messages on the stream head read queue.
It may take the following values:
.sp
.ne 2
.na
\fB\fBANYMARK\fR\fR
.ad
.RS 12n
Check if the message is marked.
.RE

.sp
.ne 2
.na
\fB\fBLASTMARK\fR\fR
.ad
.RS 12n
Check if the message is the last one marked on the queue.
.RE

The return value is \fB1\fR if the mark condition is satisfied and \fB0\fR
otherwise. On failure, \fBerrno\fR is set to the following value:
.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 10n
Invalid \fIarg\fR value.
.RE

.RE

.sp
.ne 2
.na
\fB\fBI_CKBAND\fR\fR
.ad
.RS 15n
Check if the message of a given priority band exists on the stream head read
queue. This returns \fB1\fR if a message of a given priority exists, \fB0\fR if
not, or \fB\(mi1\fR on error. \fIarg\fR should be an integer containing the
value of the priority band in question. On failure, \fBerrno\fR is set to the
following value:
.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 10n
Invalid \fIarg\fR value.
.RE

.RE

.sp
.ne 2
.na
\fB\fBI_GETBAND\fR\fR
.ad
.RS 15n
Returns the priority band of the first message on the stream head read queue in
the integer referenced by \fIarg\fR. On failure, \fBerrno\fR is set to the
following value:
.sp
.ne 2
.na
\fB\fBENODATA\fR\fR
.ad
.RS 11n
No message on the stream head read queue.
.RE

.RE

.sp
.ne 2
.na
\fB\fBI_CANPUT\fR\fR
.ad
.RS 15n
Check if a certain band is writable. \fIarg\fR is set to the priority band in
question. The return value is \fB0\fR if the priority band \fIarg\fR is flow
controlled, \fB1\fR if the band is writable, or \fB\(mi1\fR on error. On
failure, \fBerrno\fR is set to the following value:
.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 10n
Invalid \fIarg\fR value.
.RE

.RE

.sp
.ne 2
.na
\fB\fBI_SETCLTIME\fR\fR
.ad
.RS 15n
Allows the user to set the time the stream head will delay when a stream is
closing and there are data on the write queues.  Before closing each module and
driver, the stream head will delay for the specified amount of time to allow
the data to drain. Note, however, that the module or driver may itself delay in
its close routine; this delay is independent of the stream head's delay and is
not settable. If, after the delay, data are still present, data will be
flushed. \fIarg\fR is a pointer to an integer containing the number of
milliseconds to delay, rounded up to the nearest legal value on the system.
The default is fifteen seconds. On failure, \fBerrno\fR is set to the following
value:
.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 10n
Invalid \fIarg\fR value.
.RE

.RE

.sp
.ne 2
.na
\fB\fBI_GETCLTIME\fR\fR
.ad
.RS 15n
Returns the close time delay in the integer pointed by \fIarg\fR.
.RE

.sp
.ne 2
.na
\fB\fBI_SERROPT\fR\fR
.ad
.RS 15n
Sets the error mode using the value of the argument \fIarg\fR.
.sp
Normally stream head errors are persistent; once they are set due to an
\fBM_ERROR\fR or \fBM_HANGUP\fR, the error condition will remain until the
stream is closed. This option can be used to set the stream head into
non-persistent error mode i.e. once the error has been returned in response to
a \fBread\fR(2), \fBgetmsg\fR(2), \fBioctl\fR(2), \fBwrite\fR(2), or
\fBputmsg\fR(2) call the error condition will be cleared. The error mode can be
controlled independently for read and write side errors. Legal \fIarg\fR values
are either none or one of:
.sp
.ne 2
.na
\fB\fBRERRNORM\fR\fR
.ad
.RS 18n
Persistent read errors, the default.
.RE

.sp
.ne 2
.na
\fB\fBRERRNONPERSIST\fR\fR
.ad
.RS 18n
Non-persistent read errors.
.RE

\fBOR'ed\fR with either none or one of:
.sp
.ne 2
.na
\fB\fBWERRNORM\fR\fR
.ad
.RS 18n
Persistent write errors, the default.
.RE

.sp
.ne 2
.na
\fB\fBWERRNONPERSIST\fR\fR
.ad
.RS 18n
Non-persistent write errors.
.sp
When no value is specified e.g. for the read side error behavior then the
behavior for that side will be left unchanged.
.RE

On failure, \fBerrno\fR is set to the following value:
.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 10n
\fIarg\fR is not one of the above legal values.
.RE

.RE

.sp
.ne 2
.na
\fB\fBI_GERROPT\fR\fR
.ad
.RS 15n
Returns the current error mode setting in an \fBint\fR pointed to by the
argument \fIarg\fR. Error modes are described above for \fBI_SERROPT\fR. On
failure,\fBerrno\fR is set to the following value:
.sp
.ne 2
.na
\fB\fBEFAULT\fR\fR
.ad
.RS 10n
\fIarg\fR points outside the allocated address space.
.RE

.RE

.sp
.LP
The following four commands are used for connecting and disconnecting
multiplexed STREAMS configurations.
.sp
.ne 2
.na
\fB\fBI_LINK\fR\fR
.ad
.RS 13n
Connects two streams, where \fIfildes\fR is the file descriptor of the stream
connected to the multiplexing driver, and \fIarg\fR is the file descriptor of
the stream connected to another driver. The stream designated by \fIarg\fR gets
connected below the multiplexing driver. \fBI_LINK\fR requires the multiplexing
driver to send an acknowledgement message to the stream head regarding the
linking operation. This call returns a multiplexor ID number (an identifier
used to disconnect the multiplexor, see \fBI_UNLINK\fR) on success, and -1 on
failure. On failure, \fBerrno\fR is set to one of the following values:
.sp
.ne 2
.na
\fB\fBENXIO\fR\fR
.ad
.RS 10n
Hangup received on \fIfildes\fR.
.RE

.sp
.ne 2
.na
\fB\fBETIME\fR\fR
.ad
.RS 10n
Time out before acknowledgement message was received at stream head.
.RE

.sp
.ne 2
.na
\fB\fBEAGAIN\fR\fR
.ad
.RS 10n
Temporarily unable to allocate storage to perform the \fBI_LINK.\fR
.RE

.sp
.ne 2
.na
\fB\fBENOSR\fR\fR
.ad
.RS 10n
Unable to allocate storage to perform the \fBI_LINK\fR due to insufficient
\fBSTREAMS\fR memory resources.
.RE

.sp
.ne 2
.na
\fB\fBEBADF\fR\fR
.ad
.RS 10n
\fIarg\fR is not a valid, open file descriptor.
.RE

.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 10n
\fIfildes\fR stream does not support multiplexing.
.RE

.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 10n
\fIarg\fR is not a stream, or is already linked under a multiplexor.
.RE

.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 10n
The specified link operation would cause a ``cycle'' in the resulting
configuration; that is, a driver would be linked into the multiplexing
configuration in more than one place.
.RE

.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 10n
\fIfildes\fR is the file descriptor of a pipe or FIFO.
.RE

.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 10n
Either the upper or lower stream has a major number >= the maximum major number
on the system.
.RE

An \fBI_LINK\fR can also fail while waiting for the multiplexing driver to
acknowledge the link request, if a message indicating an error or a hangup is
received at the stream head of \fIfildes\fR. In addition, an error code can be
returned in the positive or negative acknowledgement message.  For these cases,
\fBI_LINK\fR will fail with \fBerrno\fR set to the value in the message.
.RE

.sp
.ne 2
.na
\fB\fBI_UNLINK\fR\fR
.ad
.RS 13n
Disconnects the two streams specified by \fIfildes\fR and \fIarg\fR.
\fIfildes\fR is the file descriptor of the stream connected to the multiplexing
driver. \fIarg\fR is the multiplexor ID number that was returned by the
\fBI_LINK\fR. If \fIarg\fR is -1, then all streams that were linked to
\fIfildes\fR are disconnected.  As in \fBI_LINK\fR, this command requires the
multiplexing driver to acknowledge the unlink. On failure, \fBerrno\fR is set
to one of the following values:
.sp
.ne 2
.na
\fB\fBENXIO\fR\fR
.ad
.RS 10n
Hangup received on \fIfildes\fR.
.RE

.sp
.ne 2
.na
\fB\fBETIME\fR\fR
.ad
.RS 10n
Time out before acknowledgement message was received at stream head.
.RE

.sp
.ne 2
.na
\fB\fBENOSR\fR\fR
.ad
.RS 10n
Unable to allocate storage to perform the \fBI_UNLINK\fR due to insufficient
STREAMS memory resources.
.RE

.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 10n
\fIarg\fR is an invalid multiplexor ID number or \fIfildes\fR is not the stream
on which the \fBI_LINK\fR that returned \fIarg\fR was performed.
.RE

.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 10n
\fIfildes\fR is the file descriptor of a pipe or FIFO.
.RE

An  \fBI_UNLINK\fR can also fail while waiting for the multiplexing driver to
acknowledge the link request, if a message indicating an error or a hangup is
received at the stream head of \fIfildes\fR. In addition, an error code can be
returned in the positive or negative acknowledgement message. For these cases,
\fBI_UNLINK\fR will fail with \fBerrno\fR set to the value in the message.
.RE

.sp
.ne 2
.na
\fB\fBI_PLINK\fR\fR
.ad
.RS 13n
Connects two streams, where \fIfildes\fR is the file descriptor of the stream
connected to the multiplexing driver, and \fIarg\fR is the file descriptor of
the stream connected to another driver. The stream designated by \fIarg\fR gets
connected via a persistent link below the multiplexing driver. \fBI_PLINK\fR
requires the multiplexing driver to send an acknowledgement message to the
stream head regarding the linking operation. This call creates a persistent
link that continues to exist even if the file descriptor \fIfildes\fR
associated with the upper stream to the multiplexing driver is closed. This
call returns a multiplexor ID number (an identifier that may be used to
disconnect the multiplexor, see \fBI_PUNLINK\fR) on success, and -1 on failure.
On failure, \fBerrno\fR is set to one of the following values:
.sp
.ne 2
.na
\fB\fBENXIO\fR\fR
.ad
.RS 10n
Hangup received on \fIfildes\fR.
.RE

.sp
.ne 2
.na
\fB\fBETIME\fR\fR
.ad
.RS 10n
Time out before acknowledgement message was received at the stream head.
.RE

.sp
.ne 2
.na
\fB\fBEAGAIN\fR\fR
.ad
.RS 10n
Unable to allocate STREAMS storage to perform the  \fBI_PLINK.\fR
.RE

.sp
.ne 2
.na
\fB\fBEBADF\fR\fR
.ad
.RS 10n
\fIarg\fR is not a valid, open file descriptor.
.RE

.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 10n
\fIfildes\fR does not support multiplexing.
.RE

.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 10n
\fIarg\fR is not a stream or is already linked under a multiplexor.
.RE

.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 10n
The specified link operation would cause a ``cycle'' in the resulting
configuration; that is, if a driver would be linked into the multiplexing
configuration in more than one place.
.RE

.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 10n
\fIfildes\fR is the file descriptor of a pipe or FIFO.
.RE

An \fBI_PLINK\fR can also fail while waiting for the multiplexing driver to
acknowledge the link request, if a message indicating an error on a hangup is
received at the stream head of \fIfildes\fR. In addition, an error code can be
returned in the positive or negative acknowledgement message.  For these cases,
\fBI_PLINK\fR will fail with \fBerrno\fR set to the value in the message.
.RE

.sp
.ne 2
.na
\fB\fBI_PUNLINK\fR\fR
.ad
.RS 13n
Disconnects the two streams specified by \fIfildes\fR and \fIarg\fR that are
connected with a persistent link. \fIfildes\fR is the file descriptor of the
stream connected to the multiplexing driver. \fIarg\fR is the multiplexor ID
number that was returned by \fBI_PLINK\fR when a stream was linked below the
multiplexing driver. If \fIarg\fR is  \fBMUXID_ALL\fR then all streams that are
persistent links to \fIfildes\fR are disconnected. As in  \fBI_PLINK,\fR this
command requires the multiplexing driver to acknowledge the unlink. On failure,
\fBerrno\fR is set to one of the following values:
.sp
.ne 2
.na
\fB\fBENXIO\fR\fR
.ad
.RS 10n
Hangup received on \fIfildes\fR.
.RE

.sp
.ne 2
.na
\fB\fBETIME\fR\fR
.ad
.RS 10n
Time out before acknowledgement message was received at the stream head.
.RE

.sp
.ne 2
.na
\fB\fBEAGAIN\fR\fR
.ad
.RS 10n
Unable to allocate buffers for the acknowledgement message.
.RE

.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 10n
Invalid multiplexor ID number.
.RE

.sp
.ne 2
.na
\fB\fBEINVAL\fR\fR
.ad
.RS 10n
\fIfildes\fR is the file descriptor of a pipe or FIFO.
.RE

An \fBI_PUNLINK\fR can also fail while waiting for the multiplexing driver to
acknowledge the link request if a message indicating an error or a hangup is
received at the stream head of \fIfildes\fR. In addition, an error code can be
returned in the positive or negative acknowledgement message.  For these cases,
\fBI_PUNLINK\fR will fail with \fBerrno\fR set to the value in the message.
.RE

.SH RETURN VALUES
.sp
.LP
Unless specified otherwise above, the return value from \fBioctl()\fR is
\fB0\fR upon success and  \fB\(mi1\fR upon failure, with \fIerrno\fR set as
indicated.
.SH SEE ALSO
.sp
.LP
\fBIntro\fR(3), \fBclose\fR(2), \fBfcntl\fR(2), \fBgetmsg\fR(2),
\fBioctl\fR(2), \fBopen\fR(2), \fBpoll\fR(2), \fBputmsg\fR(2), \fBread\fR(2),
\fBwrite\fR(2), \fBsignal\fR(3C), \fBsignal.h\fR(3HEAD),
.sp
.LP
\fISTREAMS Programming Guide\fR