/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2007 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" #include #include #include #include #include #include #include #include #include #include #include #include #include #include "message.h" #include "bootadm.h" direct_or_multi_t bam_direct = BAM_DIRECT_NOT_SET; hv_t bam_is_hv = BAM_HV_UNKNOWN; error_t dboot_or_multiboot(const char *root) { char fname[PATH_MAX]; char *image; uchar_t *ident; int fd, m; multiboot_header_t *mbh; struct stat sb; (void) snprintf(fname, PATH_MAX, "%s/%s", root, "platform/i86pc/kernel/unix"); fd = open(fname, O_RDONLY); if (fd < 0) { bam_error(OPEN_FAIL, fname, strerror(errno)); return (BAM_ERROR); } /* * mmap the first 8K */ image = mmap(NULL, 8192, PROT_READ, MAP_SHARED, fd, 0); if (image == MAP_FAILED) { bam_error(MMAP_FAIL, fname, strerror(errno)); return (BAM_ERROR); } ident = (uchar_t *)image; if (ident[EI_MAG0] != ELFMAG0 || ident[EI_MAG1] != ELFMAG1 || ident[EI_MAG2] != ELFMAG2 || ident[EI_MAG3] != ELFMAG3) { bam_error(NOT_ELF_FILE, fname); return (BAM_ERROR); } if (ident[EI_CLASS] != ELFCLASS32) { bam_error(WRONG_ELF_CLASS, fname, ident[EI_CLASS]); return (BAM_ERROR); } /* * The GRUB multiboot header must be 32-bit aligned and completely * contained in the 1st 8K of the file. If the unix binary has * a multiboot header, then it is a 'dboot' kernel. Otherwise, * this kernel must be booted via multiboot -- we call this a * 'multiboot' kernel. */ bam_direct = BAM_DIRECT_MULTIBOOT; for (m = 0; m < 8192 - sizeof (multiboot_header_t); m += 4) { mbh = (void *)(image + m); if (mbh->magic == MB_HEADER_MAGIC) { bam_direct = BAM_DIRECT_DBOOT; break; } } (void) munmap(image, 8192); (void) close(fd); if (bam_direct == BAM_DIRECT_DBOOT) { (void) snprintf(fname, PATH_MAX, "%s/%s", root, XEN_32); if (stat(fname, &sb) == 0) { bam_is_hv = BAM_HV_PRESENT; } else { bam_is_hv = BAM_HV_NO; } } return (BAM_SUCCESS); } #define INST_RELEASE "var/sadm/system/admin/INST_RELEASE" /* * Return true if root has been bfu'ed. bfu will blow away * var/sadm/system/admin/INST_RELEASE, so if it's still there, we can * assume the system has not been bfu'ed. */ static int is_bfu_system(const char *root) { static int is_bfu = -1; char path[PATH_MAX]; struct stat sb; if (is_bfu != -1) return (is_bfu); (void) snprintf(path, sizeof (path), "%s/%s", root, INST_RELEASE); if (stat(path, &sb) != 0) { is_bfu = 1; } else { is_bfu = 0; } return (is_bfu); } #define MENU_URL(root) (is_bfu_system(root) ? \ "http://www.sun.com/msg/SUNOS-8000-CF" : \ "http://www.sun.com/msg/SUNOS-8000-AK") /* * Simply allocate a new line and copy in cmd + sep + arg */ void update_line(line_t *linep) { size_t size; free(linep->line); size = strlen(linep->cmd) + strlen(linep->sep) + strlen(linep->arg) + 1; linep->line = s_calloc(1, size); (void) snprintf(linep->line, size, "%s%s%s", linep->cmd, linep->sep, linep->arg); } /* * The parse_kernel_line function examines a menu.lst kernel line. For * multiboot, this is: * * kernel * * is either /platform/i86pc/multiboot or /boot/multiboot * * may be missing, or may be any full or relative path to unix. * We check for it by looking for a word ending in "/unix". If it ends * in "kernel/unix", we upgrade it to a 32-bit entry. If it ends in * "kernel/amd64/unix", we upgrade it to the default entry. Otherwise, * it's a custom kernel, and we skip it. * * are anything that doesn't fit either of the above - these will be * copied over. * * For direct boot, the defaults are * * kernel$ * * is one of: * /platform/i86pc/kernel/$ISADIR/unix * /platform/i86pc/kernel/unix * /platform/i86pc/kernel/amd64/unix * /boot/platform/i86pc/kernel/unix * * If is any of the last three, the command may also be "kernel". * * is anything that isn't . * * This function is only called if it applies to our target boot environment. * If we can't make any sense of the kernel line, an error is printed and * BAM_ERROR is returned. * * The desired install type is given in the global variable bam_direct. * If the kernel line is of a different install type, we change it to the * preferred type. If the kernel line is already of the correct install * type, we do nothing. Either way, BAM_SUCCESS is returned. * * For safety, we do one more check: if the kernel path starts with /boot, * we verify that the new kernel exists before changing it. This is mainly * done for bfu, as it may cause the failsafe archives to be a different * boot architecture from the newly bfu'ed system. */ static error_t parse_kernel_line(line_t *linep, const char *root, uint8_t *flags) { char path[PATH_MAX]; int len, left, total_len; struct stat sb; char *new_ptr, *new_arg, *old_ptr; menu_cmd_t which; /* Used when changing a multiboot line to dboot */ char *unix_ptr, *flags1_ptr, *flags2_ptr; /* * Note that BAM_ENTRY_DBOOT refers to the entry we're looking at, not * necessarily the system type. */ if (strncmp(linep->arg, DIRECT_BOOT_32, sizeof (DIRECT_BOOT_32) - 1) == 0) { *flags |= BAM_ENTRY_DBOOT | BAM_ENTRY_32BIT; } else if ((strncmp(linep->arg, DIRECT_BOOT_KERNEL, sizeof (DIRECT_BOOT_KERNEL) - 1) == 0) || (strncmp(linep->arg, DIRECT_BOOT_64, sizeof (DIRECT_BOOT_64) - 1) == 0) || (strncmp(linep->arg, DIRECT_BOOT_FAILSAFE_KERNEL, sizeof (DIRECT_BOOT_FAILSAFE_KERNEL) - 1) == 0)) { *flags |= BAM_ENTRY_DBOOT; } else if ((strncmp(linep->arg, MULTI_BOOT, sizeof (MULTI_BOOT) - 1) == 0) || (strncmp(linep->arg, MULTI_BOOT_FAILSAFE, sizeof (MULTI_BOOT_FAILSAFE) - 1) == 0)) { *flags &= ~BAM_ENTRY_DBOOT; } else { bam_error(NO_KERNEL_MATCH, linep->lineNum, MENU_URL(root)); return (BAM_ERROR); } if (((*flags & BAM_ENTRY_DBOOT) && (bam_direct == BAM_DIRECT_DBOOT)) || (((*flags & BAM_ENTRY_DBOOT) == 0) && (bam_direct == BAM_DIRECT_MULTIBOOT))) { /* No action needed */ return (BAM_SUCCESS); } if (*flags & BAM_ENTRY_MINIROOT) { /* * We're changing boot architectures - make sure * the multiboot failsafe still exists. */ (void) snprintf(path, PATH_MAX, "%s%s", root, (*flags & BAM_ENTRY_DBOOT) ? MULTI_BOOT_FAILSAFE : DIRECT_BOOT_FAILSAFE_KERNEL); if (stat(path, &sb) != 0) { if (bam_verbose) { bam_error(FAILSAFE_MISSING, linep->lineNum); } return (BAM_SUCCESS); } } /* * Make sure we have the correct cmd - either kernel or kernel$ * The failsafe entry should always be KERNEL_CMD. */ which = ((bam_direct == BAM_DIRECT_MULTIBOOT) || (*flags & BAM_ENTRY_MINIROOT)) ? KERNEL_CMD : KERNEL_DOLLAR_CMD; free(linep->cmd); len = strlen(menu_cmds[which]) + 1; linep->cmd = s_calloc(1, len); (void) strncpy(linep->cmd, menu_cmds[which], len); /* * Since all arguments are copied, the new arg string should be close * in size to the old one. Just add 32 to cover the difference in * the boot path. */ total_len = strlen(linep->arg) + 32; new_arg = s_calloc(1, total_len); old_ptr = strchr(linep->arg, ' '); if (old_ptr != NULL) old_ptr++; /* * Transitioning from dboot to multiboot is pretty simple. We * copy in multiboot and any args. */ if (bam_direct == BAM_DIRECT_MULTIBOOT) { if (old_ptr == NULL) { (void) snprintf(new_arg, total_len, "%s", (*flags & BAM_ENTRY_MINIROOT) ? MULTI_BOOT_FAILSAFE : MULTI_BOOT); } else { (void) snprintf(new_arg, total_len, "%s %s", (*flags & BAM_ENTRY_MINIROOT) ? MULTI_BOOT_FAILSAFE : MULTI_BOOT, old_ptr); } goto done; } /* * Transitioning from multiboot to directboot is a bit more * complicated, since we may have two sets of arguments to * copy and a unix path to parse. * * First, figure out if there's a unix path. */ if ((old_ptr != NULL) && ((unix_ptr = strstr(old_ptr, "/unix")) != NULL)) { /* See if there's anything past unix */ flags2_ptr = unix_ptr + sizeof ("/unix"); if (*flags2_ptr == '\0') { flags2_ptr = NULL; } while ((unix_ptr > old_ptr) && (*unix_ptr != ' ')) unix_ptr--; if (unix_ptr == old_ptr) { flags1_ptr = NULL; } else { flags1_ptr = old_ptr; } if (strstr(unix_ptr, "kernel/unix") != NULL) { *flags |= BAM_ENTRY_32BIT; } else if ((strstr(unix_ptr, "kernel/amd64/unix") == NULL) && (!bam_force)) { /* * If the above strstr returns NULL, but bam_force is * set, we'll be upgrading an Install kernel. The * result probably won't be what was intended, but we'll * try it anyways. */ return (BAM_SKIP); } } else if (old_ptr != NULL) { flags1_ptr = old_ptr; unix_ptr = flags1_ptr + strlen(old_ptr); flags2_ptr = NULL; } else { unix_ptr = flags1_ptr = flags2_ptr = NULL; } if (*flags & BAM_ENTRY_MINIROOT) { (void) snprintf(new_arg, total_len, "%s", DIRECT_BOOT_FAILSAFE_KERNEL); } else if (*flags & BAM_ENTRY_32BIT) { (void) snprintf(new_arg, total_len, "%s", DIRECT_BOOT_32); } else { (void) snprintf(new_arg, total_len, "%s", DIRECT_BOOT_KERNEL); } /* * We now want to copy flags1_ptr through unix_ptr, and * flags2_ptr through the end of the string */ if (flags1_ptr != NULL) { len = strlcat(new_arg, " ", total_len); left = total_len - len; new_ptr = new_arg + len; if ((unix_ptr - flags1_ptr) < left) left = (unix_ptr - flags1_ptr) + 1; (void) strlcpy(new_ptr, flags1_ptr, left); } if (flags2_ptr != NULL) { (void) strlcat(new_arg, " ", total_len); (void) strlcat(new_arg, flags2_ptr, total_len); } done: free(linep->arg); linep->arg = new_arg; update_line(linep); return (BAM_SUCCESS); } /* * Similar to above, except this time we're looking at a module line, * which is quite a bit simpler. * * Under multiboot, the archive line is: * * module /platform/i86pc/boot_archive * * Under directboot, the archive line is: * * module$ /platform/i86pc/$ISADIR/boot_archive * * which may be specified exactly as either of: * * module /platform/i86pc/boot_archive * module /platform/i86pc/amd64/boot_archive * * For either dboot or multiboot, the failsafe is: * * module /boot/x86.miniroot-safe */ static error_t parse_module_line(line_t *linep, const char *root, uint8_t flags) { int len; menu_cmd_t which; char *new; /* * If necessary, BAM_ENTRY_MINIROOT was already set in flags * in upgrade_menu(). We re-check BAM_ENTRY_DBOOT here in here * in case the kernel and module lines differ. */ if ((strcmp(linep->arg, DIRECT_BOOT_ARCHIVE) == 0) || (strcmp(linep->arg, DIRECT_BOOT_ARCHIVE_64) == 0)) { flags |= BAM_ENTRY_DBOOT; } else if ((strcmp(linep->arg, MULTI_BOOT_ARCHIVE) == 0) || (strcmp(linep->arg, MINIROOT) == 0)) { flags &= ~BAM_ENTRY_DBOOT; } else { bam_error(NO_MODULE_MATCH, linep->lineNum, MENU_URL(root)); return (BAM_ERROR); } if (((flags & BAM_ENTRY_DBOOT) && (bam_direct == BAM_DIRECT_DBOOT)) || (((flags & BAM_ENTRY_DBOOT) == 0) && (bam_direct == BAM_DIRECT_MULTIBOOT)) || ((flags & BAM_ENTRY_MINIROOT) && (strcmp(linep->cmd, menu_cmds[MODULE_CMD]) == 0))) { /* No action needed */ return (BAM_SUCCESS); } /* * Make sure we have the correct cmd - either module or module$ * The failsafe entry should always be MODULE_CMD. */ which = ((bam_direct == BAM_DIRECT_MULTIBOOT) || (flags & BAM_ENTRY_MINIROOT)) ? MODULE_CMD : MODULE_DOLLAR_CMD; free(linep->cmd); len = strlen(menu_cmds[which]) + 1; linep->cmd = s_calloc(1, len); (void) strncpy(linep->cmd, menu_cmds[which], len); if (flags & BAM_ENTRY_MINIROOT) { new = MINIROOT; } else if ((bam_direct == BAM_DIRECT_DBOOT) && ((flags & BAM_ENTRY_32BIT) == 0)) { new = DIRECT_BOOT_ARCHIVE; } else { new = MULTI_BOOT_ARCHIVE; } free(linep->arg); len = strlen(new) + 1; linep->arg = s_calloc(1, len); (void) strncpy(linep->arg, new, len); update_line(linep); return (BAM_SUCCESS); } /*ARGSUSED*/ error_t upgrade_menu(menu_t *mp, char *root, char *opt) { entry_t *cur_entry; line_t *cur_line; int i, skipit, num_entries, found_hv; int *hand_entries = NULL; boolean_t found_kernel = B_FALSE; error_t rv; char *rootdev, *grubdisk = NULL; skipit = num_entries = found_hv = 0; rootdev = get_special(root); if (rootdev) { grubdisk = os_to_grubdisk(rootdev, strlen(root) == 1); free(rootdev); rootdev = NULL; } /* Loop through all OS entries in the menu.lst file */ for (cur_entry = mp->entries; cur_entry != NULL; cur_entry = cur_entry->next, skipit = 0) { if ((cur_entry->flags & BAM_ENTRY_CHAINLOADER) || ((cur_entry->flags & BAM_ENTRY_MINIROOT) && !bam_force)) continue; /* * We only change entries added by bootadm and live upgrade, * and warn on the rest, unless the -f flag was passed. */ if ((!(cur_entry->flags & (BAM_ENTRY_BOOTADM|BAM_ENTRY_LU))) && !bam_force) { if (num_entries == 0) { hand_entries = s_calloc(1, sizeof (int)); } else { hand_entries = s_realloc(hand_entries, (num_entries + 1) * sizeof (int)); } hand_entries[num_entries++] = cur_entry->entryNum; continue; } if (cur_entry->flags & BAM_ENTRY_HV) { found_hv = 1; continue; } /* * We make two loops through the lines. First, we check if * there is a root entry, and if so, whether we should be * checking this entry. */ if ((grubdisk != NULL) && (cur_entry->flags & BAM_ENTRY_ROOT)) { for (cur_line = cur_entry->start; cur_line != NULL; cur_line = cur_line->next) { if ((cur_line->cmd == NULL) || (cur_line->arg == NULL)) continue; if (strcmp(cur_line->cmd, menu_cmds[ROOT_CMD]) == 0) { if (strcmp(cur_line->arg, grubdisk) != 0) { /* A different slice */ skipit = 1; } break; } if (cur_line == cur_entry->end) break; } } if (skipit) continue; for (cur_line = cur_entry->start; cur_line != NULL; cur_line = cur_line->next) { /* * We only compare for the length of KERNEL_CMD, * so that KERNEL_DOLLAR_CMD will also match. */ if (strncmp(cur_line->cmd, menu_cmds[KERNEL_CMD], strlen(menu_cmds[KERNEL_CMD])) == 0) { rv = parse_kernel_line(cur_line, root, &(cur_entry->flags)); if (rv == BAM_SKIP) { break; } else if (rv != BAM_SUCCESS) { return (rv); } found_kernel = B_TRUE; } else if (strncmp(cur_line->cmd, menu_cmds[MODULE_CMD], strlen(menu_cmds[MODULE_CMD])) == 0) { rv = parse_module_line(cur_line, root, cur_entry->flags); if (rv != BAM_SUCCESS) { return (rv); } } if (cur_line == cur_entry->end) break; } } /* * If we're upgrading to a virtualized kernel and there are no * hv entries in menu.lst, we need to add one. */ if ((bam_is_hv == BAM_HV_PRESENT) && (found_hv == 0)) { (void) add_boot_entry(mp, NEW_HV_ENTRY, grubdisk, XEN_MENU, KERNEL_MODULE_LINE, DIRECT_BOOT_ARCHIVE); } /* * We only want to output one error, to avoid confusing a user. We * rank "No kernels changed" as a higher priority than "will not * update hand-added entries", since the former implies the latter. */ if (found_kernel == B_FALSE) { bam_error(NO_KERNELS_FOUND, MENU_URL(root)); return (BAM_ERROR); } else if (num_entries > 0) { bam_error(HAND_ADDED_ENTRY, MENU_URL(root)); bam_print_stderr("Entry Number%s: ", (num_entries > 1) ? "s" : ""); for (i = 0; i < num_entries; i++) { bam_print_stderr("%d ", hand_entries[i]); } bam_print_stderr("\n"); } return (BAM_WRITE); }