/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2007 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ /* * VM - Hardware Address Translation management. * * This file describes the contents of the sun reference mmu (sfmmu) * specific hat data structures and the sfmmu specific hat procedures. * The machine independent interface is described in . */ #ifndef _VM_MACH_SFMMU_H #define _VM_MACH_SFMMU_H #pragma ident "%Z%%M% %I% %E% SMI" #include #include #ifdef __cplusplus extern "C" { #endif /* * Define UTSB_PHYS if user TSB is always accessed via physical address. * On sun4v platform, user TSB is accessed via physical address. */ #define UTSB_PHYS 1 /* * Hypervisor TSB info */ #define NHV_TSB_INFO 2 #ifndef _ASM struct hv_tsb_block { uint64_t hv_tsb_info_pa; /* hypervisor TSB info PA */ uint64_t hv_tsb_info_cnt; /* hypervisor TSB info count */ hv_tsb_info_t hv_tsb_info[NHV_TSB_INFO]; /* hypervisor TSB info */ }; #endif /* _ASM */ #ifdef _ASM /* * This macro is used in the MMU code to check if TL should be lowered from * 2 to 1 to pop trapstat's state. See the block comment in trapstat.c * for details. */ #define TSTAT_CHECK_TL1(label, scr1, scr2) \ rdpr %tpc, scr1; \ sethi %hi(KERNELBASE), scr2; \ or scr2, %lo(KERNELBASE), scr2; \ cmp scr1, scr2; \ bgeu %xcc, 9f; \ nop; \ wrpr %g0, 1, %gl; \ ba label; \ wrpr %g0, 1, %tl; \ 9: /* * The following macros allow us to share majority of the * SFMMU code between sun4u and sun4v platforms. */ #define SETUP_TSB_ASI(qlp, tmp) #define SETUP_UTSB_ATOMIC_ASI(tmp1, tmp2) /* * Macro to swtich to alternate global register on sun4u platforms * (not applicable to sun4v platforms) */ #define USE_ALTERNATE_GLOBALS(scr) /* * Macro to set %gl register value on sun4v platforms * (not applicable to sun4u platforms) */ #define SET_GL_REG(val) \ wrpr %g0, val, %gl /* * Get pseudo-tagacc value and context from the MMU fault area. Pseudo-tagacc * is the faulting virtual address OR'd with 0 for KCONTEXT, INVALID_CONTEXT * (1) for invalid context, and USER_CONTEXT (2) for user context. * * In: * tagacc, ctxtype = scratch registers * Out: * tagacc = MMU data tag access register value * ctx = context type (KCONTEXT, INVALID_CONTEXT or USER_CONTEXT) */ #define GET_MMU_D_PTAGACC_CTXTYPE(ptagacc, ctxtype) \ MMU_FAULT_STATUS_AREA(ctxtype); \ ldx [ctxtype + MMFSA_D_ADDR], ptagacc; \ ldx [ctxtype + MMFSA_D_CTX], ctxtype; \ srlx ptagacc, MMU_PAGESHIFT, ptagacc; /* align to page boundary */ \ cmp ctxtype, USER_CONTEXT_TYPE; \ sllx ptagacc, MMU_PAGESHIFT, ptagacc; \ movgu %icc, USER_CONTEXT_TYPE, ctxtype; \ or ptagacc, ctxtype, ptagacc /* * Synthesize/get data tag access register value from the MMU fault area * * In: * tagacc, scr1 = scratch registers * Out: * tagacc = MMU data tag access register value */ #define GET_MMU_D_TAGACC(tagacc, scr1) \ GET_MMU_D_PTAGACC_CTXTYPE(tagacc, scr1) /* * Synthesize/get data tag target register value from the MMU fault area * * In: * ttarget, scr1 = scratch registers * Out: * ttarget = MMU data tag target register value */ #define GET_MMU_D_TTARGET(ttarget, scr1) \ MMU_FAULT_STATUS_AREA(ttarget); \ ldx [ttarget + MMFSA_D_CTX], scr1; \ sllx scr1, TTARGET_CTX_SHIFT, scr1; \ ldx [ttarget + MMFSA_D_ADDR], ttarget; \ srlx ttarget, TTARGET_VA_SHIFT, ttarget; \ or ttarget, scr1, ttarget /* * Synthesize/get data/instruction psuedo tag access register values * from the MMU fault area (context is 0 for kernel, 1 for invalid, 2 for user) * * In: * dtagacc, itagacc, scr1, scr2 = scratch registers * Out: * dtagacc = MMU data tag access register value w/psuedo-context * itagacc = MMU instruction tag access register value w/pseudo-context */ #define GET_MMU_BOTH_TAGACC(dtagacc, itagacc, scr1, scr2) \ MMU_FAULT_STATUS_AREA(scr1); \ ldx [scr1 + MMFSA_D_ADDR], scr2; \ ldx [scr1 + MMFSA_D_CTX], dtagacc; \ srlx scr2, MMU_PAGESHIFT, scr2; /* align to page boundary */ \ cmp dtagacc, USER_CONTEXT_TYPE; \ sllx scr2, MMU_PAGESHIFT, scr2; \ movgu %icc, USER_CONTEXT_TYPE, dtagacc; \ or scr2, dtagacc, dtagacc; \ ldx [scr1 + MMFSA_I_ADDR], scr2; \ ldx [scr1 + MMFSA_I_CTX], itagacc; \ srlx scr2, MMU_PAGESHIFT, scr2; /* align to page boundry */ \ cmp itagacc, USER_CONTEXT_TYPE; \ sllx scr2, MMU_PAGESHIFT, scr2; \ movgu %icc, USER_CONTEXT_TYPE, itagacc; \ or scr2, itagacc, itagacc /* * Synthesize/get MMU data fault address from the MMU fault area * * In: * daddr, scr1 = scratch registers * Out: * daddr = MMU data fault address */ #define GET_MMU_D_ADDR(daddr, scr1) \ MMU_FAULT_STATUS_AREA(scr1); \ ldx [scr1 + MMFSA_D_ADDR], daddr /* * Get pseudo-tagacc value and context from the MMU fault area. Pseudo-tagacc * is the faulting virtual address OR'd with 0 for KCONTEXT, INVALID_CONTEXT * (1) for invalid context, and USER_CONTEXT (2) for user context. * * In: * tagacc, ctxtype = scratch registers * Out: * tagacc = MMU instruction tag access register value * ctxtype = context type (KCONTEXT, INVALID_CONTEXT or USER_CONTEXT) */ #define GET_MMU_I_PTAGACC_CTXTYPE(ptagacc, ctxtype) \ MMU_FAULT_STATUS_AREA(ctxtype); \ ldx [ctxtype + MMFSA_I_ADDR], ptagacc; \ ldx [ctxtype + MMFSA_I_CTX], ctxtype; \ srlx ptagacc, MMU_PAGESHIFT, ptagacc; /* align to page boundary */ \ cmp ctxtype, USER_CONTEXT_TYPE; \ sllx ptagacc, MMU_PAGESHIFT, ptagacc; \ movgu %icc, USER_CONTEXT_TYPE, ctxtype; \ or ptagacc, ctxtype, ptagacc /* * Load ITLB entry * * In: * tte = reg containing tte * scr1, scr2, scr3, scr4 = scratch registers */ #define ITLB_STUFF(tte, scr1, scr2, scr3, scr4) \ mov %o0, scr1; \ mov %o1, scr2; \ mov %o2, scr3; \ mov %o3, scr4; \ MMU_FAULT_STATUS_AREA(%o2); \ ldx [%o2 + MMFSA_I_ADDR], %o0; \ ldx [%o2 + MMFSA_I_CTX], %o1; \ mov tte, %o2; \ mov MAP_ITLB, %o3; \ ta MMU_MAP_ADDR; \ /* BEGIN CSTYLED */ \ brnz,a,pn %o0, ptl1_panic; \ mov PTL1_BAD_HCALL, %g1; \ /* END CSTYLED */ \ mov scr1, %o0; \ mov scr2, %o1; \ mov scr3, %o2; \ mov scr4, %o3 /* * Load DTLB entry * * In: * tte = reg containing tte * scr1, scr2, scr3, scr4 = scratch registers */ #define DTLB_STUFF(tte, scr1, scr2, scr3, scr4) \ mov %o0, scr1; \ mov %o1, scr2; \ mov %o2, scr3; \ mov %o3, scr4; \ MMU_FAULT_STATUS_AREA(%o2); \ ldx [%o2 + MMFSA_D_ADDR], %o0; \ ldx [%o2 + MMFSA_D_CTX], %o1; \ mov tte, %o2; \ mov MAP_DTLB, %o3; \ ta MMU_MAP_ADDR; \ /* BEGIN CSTYLED */ \ brnz,a,pn %o0, ptl1_panic; \ mov PTL1_BAD_HCALL, %g1; \ /* END CSTYLED */ \ mov scr1, %o0; \ mov scr2, %o1; \ mov scr3, %o2; \ mov scr4, %o3 /* * Returns PFN given the TTE and vaddr * * In: * tte = reg containing tte * vaddr = reg containing vaddr * scr1, scr2, scr3 = scratch registers * Out: * tte = PFN value */ #define TTETOPFN(tte, vaddr, label, scr1, scr2, scr3) \ and tte, TTE_SZ_BITS, scr1; /* scr1 = ttesz */ \ sllx tte, TTE_PA_LSHIFT, tte; \ sllx scr1, 1, scr2; \ add scr2, scr1, scr2; /* mulx 3 */ \ add scr2, MMU_PAGESHIFT + TTE_PA_LSHIFT, scr3; \ /* CSTYLED */ \ brz,pt scr2, label/**/1; \ srlx tte, scr3, tte; \ sllx tte, scr2, tte; \ set 1, scr1; \ add scr2, MMU_PAGESHIFT, scr3; \ sllx scr1, scr3, scr1; \ sub scr1, 1, scr1; /* scr1=TTE_PAGE_OFFSET(ttesz) */ \ and vaddr, scr1, scr2; \ srln scr2, MMU_PAGESHIFT, scr2; \ or tte, scr2, tte; \ /* CSTYLED */ \ label/**/1: /* * TTE_SET_REF_ML is a macro that updates the reference bit if it is * not already set. * * Parameters: * tte = reg containing tte * ttepa = physical pointer to tte * tteva = virtual ptr to tte * tsbarea = tsb miss area * tmp1 = tmp reg * label = temporary label */ #define TTE_SET_REF_ML(tte, ttepa, tteva, tsbarea, tmp1, label) \ /* BEGIN CSTYLED */ \ /* check reference bit */ \ btst TTE_REF_INT, tte; \ bnz,pt %xcc, label/**/2; /* if ref bit set-skip ahead */ \ nop; \ /* update reference bit */ \ label/**/1: \ or tte, TTE_REF_INT, tmp1; \ casxa [ttepa]ASI_MEM, tte, tmp1; /* update ref bit */ \ cmp tte, tmp1; \ bne,a,pn %xcc, label/**/1; \ ldxa [ttepa]ASI_MEM, tte; /* MMU_READTTE through pa */ \ or tte, TTE_REF_INT, tte; \ label/**/2: \ /* END CSTYLED */ /* * TTE_SET_REFMOD_ML is a macro that updates the reference and modify bits * if not already set. * * Parameters: * tte = reg containing tte * ttepa = physical pointer to tte * tteva = virtual ptr to tte * tsbarea = tsb miss area * tmp1 = tmp reg * label = temporary label * exitlabel = label where to jump to if write perm bit not set. */ #define TTE_SET_REFMOD_ML(tte, ttepa, tteva, tsbarea, tmp1, label, \ exitlabel) \ /* BEGIN CSTYLED */ \ /* check reference bit */ \ btst TTE_WRPRM_INT, tte; \ bz,pn %xcc, exitlabel; /* exit if wr_perm no set */ \ btst TTE_HWWR_INT, tte; \ bnz,pn %xcc, label/**/2; /* nothing to do */ \ nop; \ /* update reference bit */ \ label/**/1: \ or tte, TTE_HWWR_INT | TTE_REF_INT, tmp1; \ casxa [ttepa]ASI_MEM, tte, tmp1; /* update ref/mod bit */ \ cmp tte, tmp1; \ bne,a,pn %xcc, label/**/1; \ ldxa [ttepa]ASI_MEM, tte; /* MMU_READTTE through pa */ \ or tte, TTE_HWWR_INT | TTE_REF_INT, tte; \ label/**/2: \ /* END CSTYLED */ /* * Synthesize a TSB base register contents for a process. * * In: * tsbinfo = TSB info pointer (ro) * tsbreg, tmp1 = scratch registers * Out: * tsbreg = value to program into TSB base register */ #define MAKE_UTSBREG(tsbinfo, tsbreg, tmp1) \ ldx [tsbinfo + TSBINFO_PADDR], tsbreg; \ lduh [tsbinfo + TSBINFO_SZCODE], tmp1; \ and tmp1, TSB_SOFTSZ_MASK, tmp1; \ or tsbreg, tmp1, tsbreg; \ /* * Load TSB base register into a dedicated scratchpad register. * This register contains utsb_pabase in bits 63:13, and TSB size * code in bits 2:0. * * In: * tsbreg = value to load (ro) * regnum = constant or register * tmp1 = scratch register * Out: * Specified scratchpad register updated * */ #define SET_UTSBREG(regnum, tsbreg, tmp1) \ mov regnum, tmp1; \ stxa tsbreg, [tmp1]ASI_SCRATCHPAD /* save tsbreg */ /* * Get TSB base register from the scratchpad * * In: * regnum = constant or register * tsbreg = scratch * Out: * tsbreg = tsbreg from the specified scratchpad register */ #define GET_UTSBREG(regnum, tsbreg) \ mov regnum, tsbreg; \ ldxa [tsbreg]ASI_SCRATCHPAD, tsbreg /* * Get the location of the TSB entry in the first TSB to probe * * In: * tagacc = tag access register (not clobbered) * tsbe, tmp1, tmp2 = scratch registers * Out: * tsbe = pointer to the tsbe in the 1st TSB */ #define GET_1ST_TSBE_PTR(tagacc, tsbe, tmp1, tmp2) \ /* BEGIN CSTYLED */ \ mov SCRATCHPAD_UTSBREG1, tmp1 ;\ ldxa [tmp1]ASI_SCRATCHPAD, tsbe /* get tsbreg */ ;\ and tsbe, TSB_SOFTSZ_MASK, tmp2 /* tmp2=szc */ ;\ andn tsbe, TSB_SOFTSZ_MASK, tsbe /* tsbbase */ ;\ mov TSB_ENTRIES(0), tmp1 /* nentries in TSB size 0 */ ;\ sllx tmp1, tmp2, tmp1 /* tmp1 = nentries in TSB */ ;\ sub tmp1, 1, tmp1 /* mask = nentries - 1 */ ;\ srlx tagacc, MMU_PAGESHIFT, tmp2 ;\ and tmp2, tmp1, tmp1 /* tsbent = virtpage & mask */ ;\ sllx tmp1, TSB_ENTRY_SHIFT, tmp1 /* entry num --> ptr */ ;\ add tsbe, tmp1, tsbe /* add entry offset to TSB base */ ;\ /* END CSTYLED */ /* * Will probe the first TSB, and if it finds a match, will insert it * into the TLB and retry. * * tsbe_ptr = precomputed first TSB entry pointer (in, ro) * vpg_4m = 4M virtual page number for tag matching (in, ro) * label = where to branch to if this is a miss (text) * %asi = atomic ASI to use for the TSB access * * For trapstat, we have to explicily use these registers. * g4 = location tag will be retrieved into from TSB (out) * g5 = location data(tte) will be retrieved into from TSB (out) */ #define PROBE_1ST_DTSB(tsbe_ptr, vpg_4m, label) /* g4/g5 clobbered */ \ /* BEGIN CSTYLED */ \ ldda [tsbe_ptr]ASI_QUAD_LDD_PHYS, %g4 /* g4 = tag, g5 = data */ ;\ cmp %g4, vpg_4m /* compare tag w/ TSB */ ;\ bne,pn %xcc, label/**/1 /* branch if !match */ ;\ nop ;\ brgez,pn %g5, label/**/1 ;\ nop ;\ TT_TRACE(trace_tsbhit) ;\ DTLB_STUFF(%g5, %g1, %g2, %g3, %g4) ;\ /* trapstat expects tte in %g5 */ ;\ retry /* retry faulted instruction */ ;\ label/**/1: \ /* END CSTYLED */ /* * Same as above, only if the TTE doesn't have the execute * bit set, will branch to exec_fault directly. */ #define PROBE_1ST_ITSB(tsbe_ptr, vpg_4m, label) \ /* BEGIN CSTYLED */ \ ldda [tsbe_ptr]ASI_QUAD_LDD_PHYS, %g4 /* g4 = tag, g5 = data */ ;\ cmp %g4, vpg_4m /* compare tag w/ TSB */ ;\ bne,pn %xcc, label/**/1 /* branch if !match */ ;\ nop ;\ brgez,pn %g5, label/**/1 ;\ nop ;\ andcc %g5, TTE_EXECPRM_INT, %g0 /* check execute bit */ ;\ bz,pn %icc, exec_fault ;\ nop ;\ TT_TRACE(trace_tsbhit) ;\ ITLB_STUFF(%g5, %g1, %g2, %g3, %g4) ;\ retry /* retry faulted instruction */ ;\ label/**/1: \ /* END CSTYLED */ /* * Get the location in the 2nd TSB of the tsbe for this fault. * Assumes that the second TSB only contains 4M mappings. * * In: * tagacc = tag access register (not clobbered) * tsbe, tmp1, tmp2 = scratch registers * Out: * tsbe = pointer to the tsbe in the 2nd TSB */ #define GET_2ND_TSBE_PTR(tagacc, tsbe, tmp1, tmp2) \ mov SCRATCHPAD_UTSBREG2, tmp1; \ ldxa [tmp1]ASI_SCRATCHPAD, tsbe; /* get tsbreg */ \ and tsbe, TSB_SOFTSZ_MASK, tmp2; /* tmp2=szc */ \ andn tsbe, TSB_SOFTSZ_MASK, tsbe; /* tsbbase */ \ mov TSB_ENTRIES(0), tmp1; /* nentries in TSB size 0 */ \ sllx tmp1, tmp2, tmp1; /* tmp1 = nentries in TSB */ \ sub tmp1, 1, tmp1; /* mask = nentries - 1 */ \ srlx tagacc, MMU_PAGESHIFT4M, tmp2; \ and tmp2, tmp1, tmp1; /* tsbent = virtpage & mask */ \ sllx tmp1, TSB_ENTRY_SHIFT, tmp1; /* entry num --> ptr */ \ add tsbe, tmp1, tsbe /* add entry offset to TSB base */ /* * vpg_4m = 4M virtual page number for tag matching (in) * tsbe_ptr = precomputed second TSB entry pointer (in) * label = label to use to make branch targets unique (text) * * For trapstat, we have to explicity use these registers. * g4 = tag portion of TSBE (out) * g5 = data portion of TSBE (out) */ #define PROBE_2ND_DTSB(tsbe_ptr, vpg_4m, label) \ /* BEGIN CSTYLED */ \ ldda [tsbe_ptr]ASI_QUAD_LDD_PHYS, %g4 /* g4 = tag, g5 = data */ ;\ /* since we are looking at 2nd tsb, if it's valid, it must be 4M */ ;\ cmp %g4, vpg_4m ;\ bne,pn %xcc, label/**/1 ;\ nop ;\ brgez,pn %g5, label/**/1 ;\ nop ;\ mov tsbe_ptr, %g1 /* trace_tsbhit wants ptr in %g1 */ ;\ TT_TRACE(trace_tsbhit) ;\ DTLB_STUFF(%g5, %g1, %g2, %g3, %g4) ;\ /* trapstat expects tte in %g5 */ ;\ retry /* retry faulted instruction */ ;\ label/**/1: \ /* END CSTYLED */ /* * Same as above, with the following additions: * If the TTE found is not executable, branch directly * to exec_fault. If a TSB miss, branch to TSB miss handler. */ #define PROBE_2ND_ITSB(tsbe_ptr, vpg_4m) \ /* BEGIN CSTYLED */ \ ldda [tsbe_ptr]ASI_QUAD_LDD_PHYS, %g4 /* g4 = tag, g5 = data */ ;\ cmp %g4, vpg_4m /* compare tag w/ TSB */ ;\ bne,pn %xcc, sfmmu_tsb_miss_tt /* branch if !match */ ;\ nop ;\ brgez,pn %g5, sfmmu_tsb_miss_tt ;\ nop ;\ andcc %g5, TTE_EXECPRM_INT, %g0 /* check execute bit */ ;\ bz,pn %icc, exec_fault ;\ mov tsbe_ptr, %g1 /* trap trace wants ptr in %g1 */ ;\ TT_TRACE(trace_tsbhit) ;\ ITLB_STUFF(%g5, %g1, %g2, %g3, %g4) ;\ retry /* retry faulted instruction */ \ /* END CSTYLED */ #endif /* _ASM */ #ifdef __cplusplus } #endif #endif /* _VM_MACH_SFMMU_H */