/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2006 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* Preallocation of spare tsb's for DR */ int starcat_tsb_spares = STARCAT_SPARE_TSB_MAX; /* Set the maximum number of slot0 + slot1 boards. .. for DR */ int starcat_boards = STARCAT_BDSET_MAX * STARCAT_BDSET_SLOT_MAX; /* Maximum number of cpus per board... for DR */ int starcat_cpu_per_board = MAX(STARCAT_SLOT0_CPU_MAX, STARCAT_SLOT1_CPU_MAX); /* Maximum number of mem-units per board... for DR */ int starcat_mem_per_board = MAX(STARCAT_SLOT0_MEM_MAX, STARCAT_SLOT1_MEM_MAX); /* Maximum number of io-units (buses) per board... for DR */ int starcat_io_per_board = 2 * MAX(STARCAT_SLOT0_IO_MAX, STARCAT_SLOT1_IO_MAX); /* Preferred minimum cage size (expressed in pages)... for DR */ pgcnt_t starcat_startup_cage_size = 0; /* Platform specific function to get unum information */ int (*p2get_mem_unum)(int, uint64_t, char *, int, int *); /* Memory for fcode claims. 16k times # maximum possible schizos */ #define EFCODE_SIZE (STARCAT_BDSET_MAX * 4 * 0x4000) int efcode_size = EFCODE_SIZE; void sgn_update_all_cpus(ushort_t, uchar_t, uchar_t); /* * The IOSRAM driver is loaded in load_platform_drivers() any cpu signature * usage prior to that time will have not have a function to call. */ static int (*iosram_rdp)(uint32_t key, uint32_t off, uint32_t len, caddr_t dptr) = prom_starcat_iosram_read; static int (*iosram_wrp)(uint32_t key, uint32_t off, uint32_t len, caddr_t dptr) = prom_starcat_iosram_write; plat_dimm_sid_board_t domain_dimm_sids[STARCAT_BDSET_MAX]; /* * set_platform_max_ncpus should return the maximum number of CPUs that the * platform supports. This function is called from check_cpus() to set the * value of max_ncpus [see PSARC 1997/165 CPU Dynamic Reconfiguration]. * Data elements which are allocated based upon max_ncpus are all accessed * via cpu_seqid and not physical IDs. Previously, the value of max_ncpus * was being set to the largest physical ID, which led to boot problems on * systems with less than 1.25GB of memory. */ int set_platform_max_ncpus(void) { int n; /* * Convert number of slot0 + slot1 boards to number of expander brds * and constrain the value to an architecturally plausible range */ n = MAX(starcat_boards, STARCAT_BDSET_MIN * STARCAT_BDSET_SLOT_MAX); n = MIN(n, STARCAT_BDSET_MAX * STARCAT_BDSET_SLOT_MAX); n = (n + STARCAT_BDSET_SLOT_MAX - 1) / STARCAT_BDSET_SLOT_MAX; /* return maximum number of cpus possible on N expander boards */ return (n * STARCAT_BDSET_CPU_MAX - STARCAT_SLOT1_CPU_MAX); } int set_platform_tsb_spares() { return (MIN(starcat_tsb_spares, MAX_UPA)); } #pragma weak mmu_init_large_pages void set_platform_defaults(void) { extern char *tod_module_name; extern int ts_dispatch_extended; extern void cpu_sgn_update(ushort_t, uchar_t, uchar_t, int); extern int tsb_lgrp_affinity; extern int segkmem_reloc; extern void mmu_init_large_pages(size_t); extern int ncpunode; /* number of CPUs detected by OBP */ #ifdef DEBUG ce_verbose_memory = 2; ce_verbose_other = 2; #endif /* Set the CPU signature function pointer */ cpu_sgn_func = cpu_sgn_update; /* Set appropriate tod module for starcat */ ASSERT(tod_module_name == NULL); tod_module_name = "todstarcat"; /* * Use the alternate TS dispatch table, which is better * tuned for large servers. */ if (ts_dispatch_extended == -1) ts_dispatch_extended = 1; /* * Use lgroup-aware TSB allocations on this platform, * since they are a considerable performance win. */ tsb_lgrp_affinity = 1; if ((mmu_page_sizes == max_mmu_page_sizes) && (mmu_ism_pagesize != MMU_PAGESIZE32M)) { if (&mmu_init_large_pages) mmu_init_large_pages(mmu_ism_pagesize); } /* * KPR (kernel page relocation) is supported on this platform. */ if (hat_kpr_enabled && kernel_cage_enable && ncpunode >= 32) { segkmem_reloc = 1; cmn_err(CE_NOTE, "!Kernel Page Relocation is ENABLED"); } else { cmn_err(CE_NOTE, "!Kernel Page Relocation is DISABLED"); } } #ifdef DEBUG pgcnt_t starcat_cage_size_limit; #endif void set_platform_cage_params(void) { extern pgcnt_t total_pages; extern struct memlist *phys_avail; int ret; if (kernel_cage_enable) { pgcnt_t preferred_cage_size; preferred_cage_size = MAX(starcat_startup_cage_size, total_pages / 256); #ifdef DEBUG if (starcat_cage_size_limit) preferred_cage_size = starcat_cage_size_limit; #endif kcage_range_lock(); /* * Note: we are assuming that post has load the * whole show in to the high end of memory. Having * taken this leap, we copy the whole of phys_avail * the glist and arrange for the cage to grow * downward (descending pfns). */ ret = kcage_range_init(phys_avail, 1); if (ret == 0) kcage_init(preferred_cage_size); kcage_range_unlock(); } if (kcage_on) cmn_err(CE_NOTE, "!DR Kernel Cage is ENABLED"); else cmn_err(CE_NOTE, "!DR Kernel Cage is DISABLED"); } void load_platform_modules(void) { if (modload("misc", "pcihp") < 0) { cmn_err(CE_NOTE, "pcihp driver failed to load"); } } /* * Starcat does not support power control of CPUs from the OS. */ /*ARGSUSED*/ int plat_cpu_poweron(struct cpu *cp) { int (*starcat_cpu_poweron)(struct cpu *) = NULL; starcat_cpu_poweron = (int (*)(struct cpu *))kobj_getsymvalue( "drmach_cpu_poweron", 0); if (starcat_cpu_poweron == NULL) return (ENOTSUP); else return ((starcat_cpu_poweron)(cp)); } /*ARGSUSED*/ int plat_cpu_poweroff(struct cpu *cp) { int (*starcat_cpu_poweroff)(struct cpu *) = NULL; starcat_cpu_poweroff = (int (*)(struct cpu *))kobj_getsymvalue( "drmach_cpu_poweroff", 0); if (starcat_cpu_poweroff == NULL) return (ENOTSUP); else return ((starcat_cpu_poweroff)(cp)); } /* * The following are currently private to Starcat DR */ int plat_max_boards() { return (starcat_boards); } int plat_max_cpu_units_per_board() { return (starcat_cpu_per_board); } int plat_max_mc_units_per_board() { return (starcat_mem_per_board); /* each CPU has a memory controller */ } int plat_max_mem_units_per_board() { return (starcat_mem_per_board); } int plat_max_io_units_per_board() { return (starcat_io_per_board); } int plat_max_cpumem_boards(void) { return (STARCAT_BDSET_MAX); } int plat_pfn_to_mem_node(pfn_t pfn) { return (pfn >> mem_node_pfn_shift); } #define STARCAT_MC_MEMBOARD_SHIFT 37 /* Boards on 128BG boundary */ /* ARGSUSED */ void plat_build_mem_nodes(u_longlong_t *list, size_t nelems) { size_t elem; pfn_t basepfn; pgcnt_t npgs; /* * Starcat mem slices are always aligned on a 128GB boundary, * fixed, and limited to one slice per expander due to design * of the centerplane ASICs. */ mem_node_pfn_shift = STARCAT_MC_MEMBOARD_SHIFT - MMU_PAGESHIFT; mem_node_physalign = 0; /* * Boot install lists are arranged , , ... */ for (elem = 0; elem < nelems; elem += 2) { basepfn = btop(list[elem]); npgs = btop(list[elem+1]); mem_node_add_slice(basepfn, basepfn + npgs - 1); } } /* * Find the CPU associated with a slice at boot-time. */ void plat_fill_mc(pnode_t nodeid) { int len; uint64_t mc_addr, mask; uint64_t mc_decode[MAX_BANKS_PER_MC]; uint32_t regs[4]; int local_mc; int portid; int expnum; int i; /* * Memory address decoding registers * (see Chap 9 of SPARCV9 JSP-1 US-III implementation) */ const uint64_t mc_decode_addr[MAX_BANKS_PER_MC] = { 0x400028, 0x400010, 0x400018, 0x400020 }; /* * Starcat memory controller portid == global CPU id */ if ((prom_getprop(nodeid, "portid", (caddr_t)&portid) < 0) || (portid == -1)) return; expnum = STARCAT_CPUID_TO_EXPANDER(portid); /* * The "reg" property returns 4 32-bit values. The first two are * combined to form a 64-bit address. The second two are for a * 64-bit size, but we don't actually need to look at that value. */ len = prom_getproplen(nodeid, "reg"); if (len != (sizeof (uint32_t) * 4)) { prom_printf("Warning: malformed 'reg' property\n"); return; } if (prom_getprop(nodeid, "reg", (caddr_t)regs) < 0) return; mc_addr = ((uint64_t)regs[0]) << 32; mc_addr |= (uint64_t)regs[1]; /* * Figure out whether the memory controller we are examining * belongs to this CPU/CMP or a different one. */ if (portid == cpunodes[CPU->cpu_id].portid) local_mc = 1; else local_mc = 0; for (i = 0; i < MAX_BANKS_PER_MC; i++) { mask = mc_decode_addr[i]; /* * If the memory controller is local to this CPU, we use * the special ASI to read the decode registers. * Otherwise, we load the values from a magic address in * I/O space. */ if (local_mc) mc_decode[i] = lddmcdecode(mask & MC_OFFSET_MASK); else mc_decode[i] = lddphysio((mc_addr | mask)); if (mc_decode[i] >> MC_VALID_SHIFT) { uint64_t base = MC_BASE(mc_decode[i]) << PHYS2UM_SHIFT; int sliceid = (base >> STARCAT_MC_MEMBOARD_SHIFT); if (sliceid < max_mem_nodes) { /* * Establish start-of-day mappings of * lgroup platform handles to memnodes. * Handle == Expander Number * Memnode == Fixed 128GB Slice */ plat_assign_lgrphand_to_mem_node(expnum, sliceid); } } } } /* * Starcat support for lgroups. * * On Starcat, an lgroup platform handle == expander number. * For split-slot configurations (e.g. slot 0 and slot 1 boards * in different domains) an MCPU board has only remote memory. * * The centerplane logic provides fixed 128GB memory slices * each of which map to a memnode. The initial mapping of * memnodes to lgroup handles is determined at boot time. * A DR addition of memory adds a new mapping. A DR copy-rename * swaps mappings. */ /* * Convert board number to expander number. */ #define BOARDNUM_2_EXPANDER(b) (b >> 1) /* * Return the number of boards configured with NULL LPA. */ static int check_for_null_lpa(void) { gdcd_t *gdcd; uint_t exp, nlpa; /* * Read GDCD from IOSRAM. * If this fails indicate a NULL LPA condition. */ if ((gdcd = kmem_zalloc(sizeof (gdcd_t), KM_NOSLEEP)) == NULL) return (EXP_COUNT+1); if ((*iosram_rdp)(GDCD_MAGIC, 0, sizeof (gdcd_t), (caddr_t)gdcd) || (gdcd->h.dcd_magic != GDCD_MAGIC) || (gdcd->h.dcd_version != DCD_VERSION)) { kmem_free(gdcd, sizeof (gdcd_t)); cmn_err(CE_WARN, "check_for_null_lpa: failed to access GDCD\n"); return (EXP_COUNT+2); } /* * Check for NULL LPAs on all slot 0 boards in domain * (i.e. in all expanders marked good for this domain). */ nlpa = 0; for (exp = 0; exp < EXP_COUNT; exp++) { if (RSV_GOOD(gdcd->dcd_slot[exp][0].l1ss_rsv) && (gdcd->dcd_slot[exp][0].l1ss_flags & L1SSFLG_THIS_L1_NULL_PROC_LPA)) nlpa++; } kmem_free(gdcd, sizeof (gdcd_t)); return (nlpa); } /* * Return the platform handle for the lgroup containing the given CPU * * For Starcat, lgroup platform handle == expander. */ extern int mpo_disabled; extern lgrp_handle_t lgrp_default_handle; int null_lpa_boards = -1; lgrp_handle_t plat_lgrp_cpu_to_hand(processorid_t id) { lgrp_handle_t plathand; plathand = STARCAT_CPUID_TO_EXPANDER(id); /* * Return the real platform handle for the CPU until * such time as we know that MPO should be disabled. * At that point, we set the "mpo_disabled" flag to true, * and from that point on, return the default handle. * * By the time we know that MPO should be disabled, the * first CPU will have already been added to a leaf * lgroup, but that's ok. The common lgroup code will * double check that the boot CPU is in the correct place, * and in the case where mpo should be disabled, will move * it to the root if necessary. */ if (mpo_disabled) { /* If MPO is disabled, return the default (UMA) handle */ plathand = lgrp_default_handle; } else { if (null_lpa_boards > 0) { /* Determine if MPO should be disabled */ mpo_disabled = 1; plathand = lgrp_default_handle; } } return (plathand); } /* * Platform specific lgroup initialization */ void plat_lgrp_init(void) { extern uint32_t lgrp_expand_proc_thresh; extern uint32_t lgrp_expand_proc_diff; /* * Set tuneables for Starcat architecture * * lgrp_expand_proc_thresh is the minimum load on the lgroups * this process is currently running on before considering * expanding threads to another lgroup. * * lgrp_expand_proc_diff determines how much less the remote lgroup * must be loaded before expanding to it. * * Since remote latencies can be costly, attempt to keep 3 threads * within the same lgroup before expanding to the next lgroup. */ lgrp_expand_proc_thresh = LGRP_LOADAVG_THREAD_MAX * 3; lgrp_expand_proc_diff = LGRP_LOADAVG_THREAD_MAX; } /* * Platform notification of lgroup (re)configuration changes */ /*ARGSUSED*/ void plat_lgrp_config(lgrp_config_flag_t evt, uintptr_t arg) { update_membounds_t *umb; lgrp_config_mem_rename_t lmr; int sbd, tbd; lgrp_handle_t hand, shand, thand; int mnode, snode, tnode; if (mpo_disabled) return; switch (evt) { case LGRP_CONFIG_MEM_ADD: /* * Establish the lgroup handle to memnode translation. */ umb = (update_membounds_t *)arg; hand = BOARDNUM_2_EXPANDER(umb->u_board); mnode = plat_pfn_to_mem_node(umb->u_base >> MMU_PAGESHIFT); plat_assign_lgrphand_to_mem_node(hand, mnode); break; case LGRP_CONFIG_MEM_DEL: /* We don't have to do anything */ break; case LGRP_CONFIG_MEM_RENAME: /* * During a DR copy-rename operation, all of the memory * on one board is moved to another board -- but the * addresses/pfns and memnodes don't change. This means * the memory has changed locations without changing identity. * * Source is where we are copying from and target is where we * are copying to. After source memnode is copied to target * memnode, the physical addresses of the target memnode are * renamed to match what the source memnode had. Then target * memnode can be removed and source memnode can take its * place. * * To do this, swap the lgroup handle to memnode mappings for * the boards, so target lgroup will have source memnode and * source lgroup will have empty target memnode which is where * its memory will go (if any is added to it later). * * Then source memnode needs to be removed from its lgroup * and added to the target lgroup where the memory was living * but under a different name/memnode. The memory was in the * target memnode and now lives in the source memnode with * different physical addresses even though it is the same * memory. */ sbd = arg & 0xffff; tbd = (arg & 0xffff0000) >> 16; shand = BOARDNUM_2_EXPANDER(sbd); thand = BOARDNUM_2_EXPANDER(tbd); snode = plat_lgrphand_to_mem_node(shand); tnode = plat_lgrphand_to_mem_node(thand); plat_assign_lgrphand_to_mem_node(thand, snode); plat_assign_lgrphand_to_mem_node(shand, tnode); lmr.lmem_rename_from = shand; lmr.lmem_rename_to = thand; /* * Remove source memnode of copy rename from its lgroup * and add it to its new target lgroup */ lgrp_config(LGRP_CONFIG_MEM_RENAME, (uintptr_t)snode, (uintptr_t)&lmr); break; default: break; } } /* * Return latency between "from" and "to" lgroups * * This latency number can only be used for relative comparison * between lgroups on the running system, cannot be used across platforms, * and may not reflect the actual latency. It is platform and implementation * specific, so platform gets to decide its value. It would be nice if the * number was at least proportional to make comparisons more meaningful though. * NOTE: The numbers below are supposed to be load latencies for uncached * memory divided by 10. */ int plat_lgrp_latency(lgrp_handle_t from, lgrp_handle_t to) { /* * Return min remote latency when there are more than two lgroups * (root and child) and getting latency between two different lgroups * or root is involved */ if (lgrp_optimizations() && (from != to || from == LGRP_DEFAULT_HANDLE || to == LGRP_DEFAULT_HANDLE)) return (48); else return (28); } /* * Return platform handle for root lgroup */ lgrp_handle_t plat_lgrp_root_hand(void) { if (mpo_disabled) return (lgrp_default_handle); return (LGRP_DEFAULT_HANDLE); } /* ARGSUSED */ void plat_freelist_process(int mnode) { } void load_platform_drivers(void) { uint_t tunnel; pnode_t nodeid; dev_info_t *chosen_devi; char chosen_iosram[MAXNAMELEN]; /* * Get /chosen node - that's where the tunnel property is */ nodeid = prom_chosennode(); /* * Get the iosram property from the chosen node. */ if (prom_getprop(nodeid, IOSRAM_CHOSEN_PROP, (caddr_t)&tunnel) <= 0) { prom_printf("Unable to get iosram property\n"); cmn_err(CE_PANIC, "Unable to get iosram property\n"); } if (prom_phandle_to_path((phandle_t)tunnel, chosen_iosram, sizeof (chosen_iosram)) < 0) { (void) prom_printf("prom_phandle_to_path(0x%x) failed\n", tunnel); cmn_err(CE_PANIC, "prom_phandle_to_path(0x%x) failed\n", tunnel); } /* * Attach all driver instances along the iosram's device path */ if (i_ddi_attach_hw_nodes("iosram") != DDI_SUCCESS) { cmn_err(CE_WARN, "IOSRAM failed to load\n"); } if ((chosen_devi = e_ddi_hold_devi_by_path(chosen_iosram, 0)) == NULL) { (void) prom_printf("e_ddi_hold_devi_by_path(%s) failed\n", chosen_iosram); cmn_err(CE_PANIC, "e_ddi_hold_devi_by_path(%s) failed\n", chosen_iosram); } ndi_rele_devi(chosen_devi); /* * iosram driver is now loaded so we need to set our read and * write pointers. */ iosram_rdp = (int (*)(uint32_t, uint32_t, uint32_t, caddr_t)) modgetsymvalue("iosram_rd", 0); iosram_wrp = (int (*)(uint32_t, uint32_t, uint32_t, caddr_t)) modgetsymvalue("iosram_wr", 0); /* * Need to check for null proc LPA after IOSRAM driver is loaded * and before multiple lgroups created (when start_other_cpus() called) */ null_lpa_boards = check_for_null_lpa(); /* load and attach the axq driver */ if (i_ddi_attach_hw_nodes("axq") != DDI_SUCCESS) { cmn_err(CE_WARN, "AXQ failed to load\n"); } /* load Starcat Solaris Mailbox Client driver */ if (modload("misc", "scosmb") < 0) { cmn_err(CE_WARN, "SCOSMB failed to load\n"); } /* load the DR driver */ if (i_ddi_attach_hw_nodes("dr") != DDI_SUCCESS) { cmn_err(CE_WARN, "dr failed to load"); } /* * Load the mc-us3 memory driver. */ if (i_ddi_attach_hw_nodes("mc-us3") != DDI_SUCCESS) cmn_err(CE_WARN, "mc-us3 failed to load"); else (void) ddi_hold_driver(ddi_name_to_major("mc-us3")); /* Load the schizo pci bus nexus driver. */ if (i_ddi_attach_hw_nodes("pcisch") != DDI_SUCCESS) cmn_err(CE_WARN, "pcisch failed to load"); plat_ecc_init(); } /* * No platform drivers on this platform */ char *platform_module_list[] = { (char *)0 }; /*ARGSUSED*/ void plat_tod_fault(enum tod_fault_type tod_bad) { } /* * Update the signature(s) in the IOSRAM's domain data section. */ void cpu_sgn_update(ushort_t sgn, uchar_t state, uchar_t sub_state, int cpuid) { sig_state_t new_sgn; sig_state_t current_sgn; /* * If the substate is REBOOT, then check for panic flow */ if (sub_state == SIGSUBST_REBOOT) { (*iosram_rdp)(DOMD_MAGIC, DOMD_DSTATE_OFFSET, sizeof (sig_state_t), (caddr_t)¤t_sgn); if (current_sgn.state_t.state == SIGST_EXIT) sub_state = SIGSUBST_PANIC_REBOOT; } /* * cpuid == -1 indicates that the operation applies to all cpus. */ if (cpuid < 0) { sgn_update_all_cpus(sgn, state, sub_state); return; } new_sgn.signature = CPU_SIG_BLD(sgn, state, sub_state); (*iosram_wrp)(DOMD_MAGIC, DOMD_CPUSIGS_OFFSET + cpuid * sizeof (sig_state_t), sizeof (sig_state_t), (caddr_t)&new_sgn); /* * Under certain conditions we don't update the signature * of the domain_state. */ if ((sgn == OS_SIG) && ((state == SIGST_OFFLINE) || (state == SIGST_DETACHED))) return; (*iosram_wrp)(DOMD_MAGIC, DOMD_DSTATE_OFFSET, sizeof (sig_state_t), (caddr_t)&new_sgn); } /* * Update the signature(s) in the IOSRAM's domain data section for all CPUs. */ void sgn_update_all_cpus(ushort_t sgn, uchar_t state, uchar_t sub_state) { sig_state_t new_sgn; int i = 0; new_sgn.signature = CPU_SIG_BLD(sgn, state, sub_state); /* * First update the domain_state signature */ (*iosram_wrp)(DOMD_MAGIC, DOMD_DSTATE_OFFSET, sizeof (sig_state_t), (caddr_t)&new_sgn); for (i = 0; i < NCPU; i++) { if (cpu[i] != NULL && (cpu[i]->cpu_flags & (CPU_EXISTS|CPU_QUIESCED))) { (*iosram_wrp)(DOMD_MAGIC, DOMD_CPUSIGS_OFFSET + i * sizeof (sig_state_t), sizeof (sig_state_t), (caddr_t)&new_sgn); } } } ushort_t get_cpu_sgn(int cpuid) { sig_state_t cpu_sgn; (*iosram_rdp)(DOMD_MAGIC, DOMD_CPUSIGS_OFFSET + cpuid * sizeof (sig_state_t), sizeof (sig_state_t), (caddr_t)&cpu_sgn); return (cpu_sgn.state_t.sig); } uchar_t get_cpu_sgn_state(int cpuid) { sig_state_t cpu_sgn; (*iosram_rdp)(DOMD_MAGIC, DOMD_CPUSIGS_OFFSET + cpuid * sizeof (sig_state_t), sizeof (sig_state_t), (caddr_t)&cpu_sgn); return (cpu_sgn.state_t.state); } /* * Type of argument passed into plat_get_ecache_cpu via ddi_walk_devs * for matching on specific CPU node in device tree */ typedef struct { char *jnum; /* output, kmem_alloc'd if successful */ int cpuid; /* input, to match cpuid/portid/upa-portid */ uint_t dimm; /* input, index into ecache-dimm-label */ } plat_ecache_cpu_arg_t; /* * plat_get_ecache_cpu is called repeatedly by ddi_walk_devs with pointers * to device tree nodes (dip) and to a plat_ecache_cpu_arg_t structure (arg). * Returning DDI_WALK_CONTINUE tells ddi_walk_devs to keep going, returning * DDI_WALK_TERMINATE ends the walk. When the node for the specific CPU * being searched for is found, the walk is done. But before returning to * ddi_walk_devs and plat_get_ecacheunum, we grab this CPU's ecache-dimm-label * property and set the jnum member of the plat_ecache_cpu_arg_t structure to * point to the label corresponding to this specific ecache DIMM. It is up * to plat_get_ecacheunum to kmem_free this string. */ static int plat_get_ecache_cpu(dev_info_t *dip, void *arg) { char *devtype; plat_ecache_cpu_arg_t *cpuarg; char **dimm_labels; uint_t numlabels; int portid; /* * Check device_type, must be "cpu" */ if (ddi_prop_lookup_string(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "device_type", &devtype) != DDI_PROP_SUCCESS) return (DDI_WALK_CONTINUE); if (strcmp(devtype, "cpu")) { ddi_prop_free((void *)devtype); return (DDI_WALK_CONTINUE); } ddi_prop_free((void *)devtype); /* * Check cpuid, portid, upa-portid (in that order), must * match the cpuid being sought */ portid = ddi_prop_get_int(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "cpuid", -1); if (portid == -1) portid = ddi_prop_get_int(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "portid", -1); if (portid == -1) portid = ddi_prop_get_int(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "upa-portid", -1); cpuarg = (plat_ecache_cpu_arg_t *)arg; if (portid != cpuarg->cpuid) return (DDI_WALK_CONTINUE); /* * Found the right CPU, fetch ecache-dimm-label property */ if (ddi_prop_lookup_string_array(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "ecache-dimm-label", &dimm_labels, &numlabels) != DDI_PROP_SUCCESS) { #ifdef DEBUG cmn_err(CE_NOTE, "cpuid=%d missing ecache-dimm-label property", portid); #endif /* DEBUG */ return (DDI_WALK_TERMINATE); } if (cpuarg->dimm < numlabels) { cpuarg->jnum = kmem_alloc( strlen(dimm_labels[cpuarg->dimm]) + 1, KM_SLEEP); if (cpuarg->jnum != (char *)NULL) (void) strcpy(cpuarg->jnum, dimm_labels[cpuarg->dimm]); #ifdef DEBUG else cmn_err(CE_WARN, "cannot kmem_alloc for ecache dimm label"); #endif /* DEBUG */ } ddi_prop_free((void *)dimm_labels); return (DDI_WALK_TERMINATE); } /* * Bit 4 of physical address indicates ecache 0 or 1 */ #define ECACHE_DIMM_SHIFT 4 #define ECACHE_DIMM_MASK 0x10 /* * plat_get_ecacheunum is called to generate the unum for an ecache error. * After some initialization, nearly all of the work is done by ddi_walk_devs * and plat_get_ecache_cpu. */ int plat_get_ecacheunum(int cpuid, unsigned long long physaddr, char *buf, int buflen, int *ustrlen) { plat_ecache_cpu_arg_t findcpu; uint_t expander, slot, proc; findcpu.jnum = (char *)NULL; findcpu.cpuid = cpuid; findcpu.dimm = (physaddr & ECACHE_DIMM_MASK) >> ECACHE_DIMM_SHIFT; /* * Walk the device tree, find this specific CPU, and get the label * for this ecache, returned here in findcpu.jnum */ ddi_walk_devs(ddi_root_node(), plat_get_ecache_cpu, (void *)&findcpu); if (findcpu.jnum == (char *)NULL) return (-1); expander = STARCAT_CPUID_TO_EXPANDER(cpuid); slot = STARCAT_CPUID_TO_BOARDSLOT(cpuid); /* * STARCAT_CPUID_TO_PORTID clears the CoreID bit so that * STARCAT_CPUID_TO_AGENT will return a physical proc (0 - 3). */ proc = STARCAT_CPUID_TO_AGENT(STARCAT_CPUID_TO_PORTID(cpuid)); /* * NOTE: Any modifications to the snprintf() call below will require * changing plat_log_fruid_error() as well! */ (void) snprintf(buf, buflen, "%s%u/P%u/E%u J%s", (slot ? "IO" : "SB"), expander, proc, findcpu.dimm, findcpu.jnum); *ustrlen = strlen(buf); kmem_free(findcpu.jnum, strlen(findcpu.jnum) + 1); return (0); } /*ARGSUSED*/ int plat_get_mem_unum(int synd_code, uint64_t flt_addr, int flt_bus_id, int flt_in_memory, ushort_t flt_status, char *buf, int buflen, int *lenp) { int ret; /* * check if it's a Memory or an Ecache error. */ if (flt_in_memory) { if (p2get_mem_unum != NULL) { return (p2get_mem_unum(synd_code, P2ALIGN(flt_addr, 8), buf, buflen, lenp)); } else { return (ENOTSUP); } } else if (flt_status & ECC_ECACHE) { if ((ret = plat_get_ecacheunum(flt_bus_id, P2ALIGN(flt_addr, 8), buf, buflen, lenp)) != 0) return (EIO); } else { return (ENOTSUP); } return (ret); } static int (*ecc_mailbox_msg_func)(plat_ecc_message_type_t, void *) = NULL; /* * To keep OS mailbox handling localized, all we do is forward the call to the * scosmb module (if it is available). */ int plat_send_ecc_mailbox_msg(plat_ecc_message_type_t msg_type, void *datap) { /* * find the symbol for the mailbox sender routine in the scosmb module */ if (ecc_mailbox_msg_func == NULL) ecc_mailbox_msg_func = (int (*)(plat_ecc_message_type_t, void *))modgetsymvalue("scosmb_log_ecc_error", 0); /* * If the symbol was found, call it. Otherwise, there is not much * else we can do and console messages will have to suffice. */ if (ecc_mailbox_msg_func) return ((*ecc_mailbox_msg_func)(msg_type, datap)); else return (ENODEV); } int plat_make_fru_cpuid(int sb, int m, int proc) { return (MAKE_CPUID(sb, m, proc)); } /* * board number for a given proc */ int plat_make_fru_boardnum(int proc) { return (STARCAT_CPUID_TO_EXPANDER(proc)); } /* * This platform hook gets called from mc_add_mem_unum_label() in the mc-us3 * driver giving each platform the opportunity to add platform * specific label information to the unum for ECC error logging purposes. */ void plat_add_mem_unum_label(char *unum, int mcid, int bank, int dimm) { char new_unum[UNUM_NAMLEN]; uint_t expander = STARCAT_CPUID_TO_EXPANDER(mcid); uint_t slot = STARCAT_CPUID_TO_BOARDSLOT(mcid); /* * STARCAT_CPUID_TO_PORTID clears the CoreID bit so that * STARCAT_CPUID_TO_AGENT will return a physical proc (0 - 3). */ uint_t proc = STARCAT_CPUID_TO_AGENT(STARCAT_CPUID_TO_PORTID(mcid)); /* * NOTE: Any modifications to the two sprintf() calls below will * require changing plat_log_fruid_error() as well! */ if (dimm == -1) (void) snprintf(new_unum, UNUM_NAMLEN, "%s%u/P%u/B%d %s", (slot ? "IO" : "SB"), expander, proc, (bank & 0x1), unum); else (void) snprintf(new_unum, UNUM_NAMLEN, "%s%u/P%u/B%d/D%d %s", (slot ? "IO" : "SB"), expander, proc, (bank & 0x1), (dimm & 0x3), unum); (void) strcpy(unum, new_unum); } int plat_get_cpu_unum(int cpuid, char *buf, int buflen, int *lenp) { int expander = STARCAT_CPUID_TO_EXPANDER(cpuid); int slot = STARCAT_CPUID_TO_BOARDSLOT(cpuid); if (snprintf(buf, buflen, "%s%d", (slot ? "IO" : "SB"), expander) >= buflen) { return (ENOSPC); } else { *lenp = strlen(buf); return (0); } } /* * This routine is used by the data bearing mondo (DMV) initialization * routine to determine the number of hardware and software DMV interrupts * that a platform supports. */ void plat_dmv_params(uint_t *hwint, uint_t *swint) { *hwint = STARCAT_DMV_HWINT; *swint = 0; } /* * If provided, this function will be called whenever the nodename is updated. * To keep OS mailbox handling localized, all we do is forward the call to the * scosmb module (if it is available). */ void plat_nodename_set(void) { void (*nodename_update_func)(uint64_t) = NULL; /* * find the symbol for the nodename update routine in the scosmb module */ nodename_update_func = (void (*)(uint64_t)) modgetsymvalue("scosmb_update_nodename", 0); /* * If the symbol was found, call it. Otherwise, log a note (but not to * the console). */ if (nodename_update_func != NULL) { nodename_update_func(0); } else { cmn_err(CE_NOTE, "!plat_nodename_set: scosmb_update_nodename not found\n"); } } caddr_t efcode_vaddr = NULL; caddr_t efcode_paddr = NULL; /* * Preallocate enough memory for fcode claims. */ caddr_t efcode_alloc(caddr_t alloc_base) { caddr_t efcode_alloc_base = (caddr_t)roundup((uintptr_t)alloc_base, MMU_PAGESIZE); caddr_t vaddr; /* * allocate the physical memory schizo fcode. */ if ((vaddr = (caddr_t)BOP_ALLOC(bootops, efcode_alloc_base, efcode_size, MMU_PAGESIZE)) == NULL) cmn_err(CE_PANIC, "Cannot allocate Efcode Memory"); efcode_vaddr = vaddr; return (efcode_alloc_base + efcode_size); } caddr_t plat_startup_memlist(caddr_t alloc_base) { caddr_t tmp_alloc_base; tmp_alloc_base = efcode_alloc(alloc_base); tmp_alloc_base = (caddr_t)roundup((uintptr_t)tmp_alloc_base, ecache_alignsize); return (tmp_alloc_base); } /* * This is a helper function to determine if a given * node should be considered for a dr operation according * to predefined dr names. This is accomplished using * a function defined in drmach module. The drmach module * owns the definition of dr allowable names. * Formal Parameter: The name of a device node. * Expected Return Value: -1, device node name does not map to a valid dr name. * A value greater or equal to 0, name is valid. */ int starcat_dr_name(char *name) { int (*drmach_name2type)(char *) = NULL; /* Get a pointer to helper function in the dramch module. */ drmach_name2type = (int (*)(char *))kobj_getsymvalue("drmach_name2type_idx", 0); if (drmach_name2type == NULL) return (-1); return ((*drmach_name2type)(name)); } void startup_platform(void) { } /* * KDI functions - used by the in-situ kernel debugger (kmdb) to perform * platform-specific operations. These functions execute when the world is * stopped, and as such cannot make any blocking calls, hold locks, etc. * promif functions are a special case, and may be used. */ static void starcat_system_claim(void) { prom_interpret("sigb-sig! my-sigb-sig!", OBP_SIG, OBP_SIG, 0, 0, 0); } static void starcat_system_release(void) { prom_interpret("sigb-sig! my-sigb-sig!", OS_SIG, OS_SIG, 0, 0, 0); } void plat_kdi_init(kdi_t *kdi) { kdi->pkdi_system_claim = starcat_system_claim; kdi->pkdi_system_release = starcat_system_release; } /* * This function returns 1 if large pages for kernel heap are supported * and 0 otherwise. * * Currently we disable lp kmem support if kpr is going to be enabled * because in the case of large pages hat_add_callback()/hat_delete_callback() * cause network performance degradation */ int plat_lpkmem_is_supported(void) { extern int segkmem_reloc; if (hat_kpr_enabled && kernel_cage_enable && (ncpunode >= 32 || segkmem_reloc == 1)) return (0); return (1); }