/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License, Version 1.0 only * (the "License"). You may not use this file except in compliance * with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2005 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * The OpenBoot Standalone Interface supplies the kernel with * implementation dependent parameters through the devinfo/property mechanism */ typedef enum { XDRBOOL, XDRINT, XDRSTRING } xdrs; /* * structure describing properties that we are interested in querying the * OBP for. */ struct getprop_info { char *name; xdrs type; uint_t *var; }; /* * structure used to convert between a string returned by the OBP & a type * used within the kernel. We prefer to paramaterize rather than type. */ struct convert_info { char *name; uint_t var; char *realname; }; /* * structure describing nodes that we are interested in querying the OBP for * properties. */ struct node_info { char *name; int size; struct getprop_info *prop; struct getprop_info *prop_end; unsigned int *value; }; /* * macro definitions for routines that form the OBP interface */ #define NEXT prom_nextnode #define CHILD prom_childnode #define GETPROP prom_getprop #define GETPROPLEN prom_getproplen /* 0=quiet; 1=verbose; 2=debug */ int debug_fillsysinfo = 0; #define VPRINTF if (debug_fillsysinfo) prom_printf int ncpunode; struct cpu_node cpunodes[NCPU]; static void check_cpus_ver(void); static void check_cpus_set(void); void fill_cpu(dnode_t); void fill_cpu_ddi(dev_info_t *); void empty_cpu(int); void plat_fill_mc(dnode_t); #pragma weak plat_fill_mc uint64_t system_clock_freq; /* * list of well known devices that must be mapped, and the variables that * contain their addresses. */ caddr_t v_auxio_addr = NULL; caddr_t v_eeprom_addr = NULL; caddr_t v_timecheck_addr = NULL; caddr_t v_rtc_addr_reg = NULL; volatile unsigned char *v_rtc_data_reg = NULL; volatile uint8_t *v_pmc_addr_reg = NULL; volatile uint8_t *v_pmc_data_reg = NULL; int niobus = 0; uint_t niommu_tsbs = 0; /* * Hardware watchdog support. */ #define CHOSEN_EEPROM "eeprom" #define WATCHDOG_ENABLE "watchdog-enable" static dnode_t chosen_eeprom; /* * Appropriate tod module will be dynamically selected while booting * based on finding a device tree node with a "device_type" property value * of "tod". If such a node describing tod is not found, for backward * compatibility, a node with a "name" property value of "eeprom" and * "model" property value of "mk48t59" will be used. Failing to find a * node matching either of the above criteria will result in no tod module * being selected; this will cause the boot process to halt. */ char *tod_module_name; /* * If this variable is non-zero, cpr should return "not supported" when * it is queried even though it would normally be supported on this platform. */ int cpr_supported_override; /* * Some platforms may need to support CPR even in the absence of the * energystar-v* property (Enchilada server, for example). If this * variable is non-zero, cpr should proceed even in the absence * of the energystar-v* property. */ int cpr_platform_enable = 0; /* * Some nodes have functions that need to be called when they're seen. */ static void have_sbus(dnode_t); static void have_pci(dnode_t); static void have_eeprom(dnode_t); static void have_auxio(dnode_t); static void have_rtc(dnode_t); static void have_tod(dnode_t); static void have_pmc(dnode_t); static struct wkdevice { char *wk_namep; void (*wk_func)(dnode_t); caddr_t *wk_vaddrp; ushort_t wk_flags; #define V_OPTIONAL 0x0000 #define V_MUSTHAVE 0x0001 #define V_MAPPED 0x0002 #define V_MULTI 0x0003 /* optional, may be more than one */ } wkdevice[] = { { "sbus", have_sbus, NULL, V_MULTI }, { "pci", have_pci, NULL, V_MULTI }, { "eeprom", have_eeprom, NULL, V_MULTI }, { "auxio", have_auxio, NULL, V_OPTIONAL }, { "rtc", have_rtc, NULL, V_OPTIONAL }, { "pmc", have_pmc, NULL, V_OPTIONAL }, { 0, }, }; static void map_wellknown(dnode_t); void map_wellknown_devices() { struct wkdevice *wkp; phandle_t ieeprom; dnode_t root; uint_t stick_freq; /* * if there is a chosen eeprom, note it (for have_eeprom()) */ if (GETPROPLEN(prom_chosennode(), CHOSEN_EEPROM) == sizeof (phandle_t) && GETPROP(prom_chosennode(), CHOSEN_EEPROM, (caddr_t)&ieeprom) != -1) chosen_eeprom = (dnode_t)prom_decode_int(ieeprom); root = prom_nextnode((dnode_t)0); /* * Get System clock frequency from root node if it exists. */ if (GETPROP(root, "stick-frequency", (caddr_t)&stick_freq) != -1) system_clock_freq = stick_freq; map_wellknown(NEXT((dnode_t)0)); /* * See if it worked */ for (wkp = wkdevice; wkp->wk_namep; ++wkp) { if (wkp->wk_flags == V_MUSTHAVE) { cmn_err(CE_PANIC, "map_wellknown_devices: required " "device %s not mapped", wkp->wk_namep); } } /* * all sun4u systems must have an IO bus, i.e. sbus or pcibus */ if (niobus == 0) cmn_err(CE_PANIC, "map_wellknown_devices: no i/o bus node"); check_cpus_ver(); check_cpus_set(); } /* * map_wellknown - map known devices & registers */ static void map_wellknown(dnode_t curnode) { extern int status_okay(int, char *, int); char tmp_name[MAXSYSNAME]; static void fill_address(dnode_t, char *); int sok; #ifdef VPRINTF VPRINTF("map_wellknown(%x)\n", curnode); #endif /* VPRINTF */ for (curnode = CHILD(curnode); curnode; curnode = NEXT(curnode)) { /* * prune subtree if status property indicating not okay */ sok = status_okay((int)curnode, (char *)NULL, 0); if (!sok) { char devtype_buf[OBP_MAXPROPNAME]; int size; #ifdef VPRINTF VPRINTF("map_wellknown: !okay status property\n"); #endif /* VPRINTF */ /* * a status property indicating bad memory will be * associated with a node which has a "device_type" * property with a value of "memory-controller" */ if ((size = GETPROPLEN(curnode, OBP_DEVICETYPE)) == -1) continue; if (size > OBP_MAXPROPNAME) { cmn_err(CE_CONT, "node %x '%s' prop too " "big\n", curnode, OBP_DEVICETYPE); continue; } if (GETPROP(curnode, OBP_DEVICETYPE, devtype_buf) == -1) { cmn_err(CE_CONT, "node %x '%s' get failed\n", curnode, OBP_DEVICETYPE); continue; } if (strcmp(devtype_buf, "memory-controller") != 0) continue; /* * ...else fall thru and process the node... */ } bzero(tmp_name, MAXSYSNAME); if (GETPROP(curnode, OBP_NAME, (caddr_t)tmp_name) != -1) fill_address(curnode, tmp_name); if (GETPROP(curnode, OBP_DEVICETYPE, tmp_name) != -1 && strcmp(tmp_name, "cpu") == 0) { fill_cpu(curnode); } if (strcmp(tmp_name, "tod") == 0) have_tod(curnode); if (sok && (strcmp(tmp_name, "memory-controller") == 0) && (&plat_fill_mc != NULL)) plat_fill_mc(curnode); map_wellknown(curnode); } } static void fill_address(dnode_t curnode, char *namep) { struct wkdevice *wkp; int size; uint32_t vaddr; for (wkp = wkdevice; wkp->wk_namep; ++wkp) { if (strcmp(wkp->wk_namep, namep) != 0) continue; if (wkp->wk_flags == V_MAPPED) return; if (wkp->wk_vaddrp != NULL) { if ((size = GETPROPLEN(curnode, OBP_ADDRESS)) == -1) { cmn_err(CE_CONT, "device %s size %d\n", namep, size); continue; } if (size != sizeof (vaddr)) { cmn_err(CE_CONT, "device %s address prop too " "big\n", namep); continue; } if (GETPROP(curnode, OBP_ADDRESS, (caddr_t)&vaddr) == -1) { cmn_err(CE_CONT, "device %s not mapped\n", namep); continue; } /* make into a native pointer */ *wkp->wk_vaddrp = (caddr_t)vaddr; #ifdef VPRINTF VPRINTF("fill_address: %s mapped to %x\n", namep, *wkp->wk_vaddrp); #endif /* VPRINTF */ } if (wkp->wk_func != NULL) (*wkp->wk_func)(curnode); /* * If this one is optional and there may be more than * one, don't set V_MAPPED, which would cause us to skip it * next time around */ if (wkp->wk_flags != V_MULTI) wkp->wk_flags = V_MAPPED; } } int get_portid(dnode_t node, dnode_t *cmpp) { int portid; char dev_type[OBP_MAXPROPNAME]; if (cmpp != NULL) *cmpp = OBP_NONODE; if (GETPROP(node, "portid", (caddr_t)&portid) != -1) return (portid); if (GETPROP(node, "upa-portid", (caddr_t)&portid) != -1) return (portid); if (GETPROP(node, "device_type", (caddr_t)&dev_type) == -1) return (-1); /* On a CMP core, the "portid" is in the parent */ if (strcmp(dev_type, "cpu") == 0) { node = prom_parentnode(node); if (GETPROP(node, "portid", (caddr_t)&portid) != -1) { if (cmpp != NULL) *cmpp = node; return (portid); } } return (-1); } /* * Adjust page coloring variables based on the physical ecache setsize of * the configured cpus: * * Set ecache_setsize to max ecache set size to be used by * page_coloring_init() to determine the page colors to configure. * The adjustment is unlikely to be necessary... For cheetah+ systems, * ecache_setsize should already be set in cpu_fiximp() to the maximum * possible ecache setsize of any supported cheetah+ cpus. The adjustment * is for the off chance that a non-cheetah+ system may have heterogenous * cpus. * * Set cpu_setsize to the actual cpu setsize if the setsize is homogenous * across all cpus otherwise set it to -1 if heterogenous. * * Set cpu_page_colors to -1 to signify heterogeneity of ecache setsizes * to the page_get routines. */ static void adj_ecache_setsize(int ecsetsize) { if (ecsetsize > ecache_setsize) ecache_setsize = ecsetsize; switch (cpu_setsize) { case -1: break; case 0: cpu_setsize = ecsetsize; break; default: /* set to -1 if hetergenous cpus */ if (cpu_setsize != ecsetsize) { if (do_pg_coloring) cpu_page_colors = -1; /* * if page coloring disabled, cpu_page_colors should * remain 0 to prevent page coloring processing. */ cpu_setsize = -1; } break; } } void fill_cpu(dnode_t node) { extern int cpu_get_cpu_unum(int, char *, int, int *); struct cpu_node *cpunode; processorid_t cpuid; int portid; int tlbsize; int size; uint_t clk_freq; dnode_t cmpnode; char namebuf[OBP_MAXPROPNAME], unum[UNUM_NAMLEN]; char *namebufp; if ((portid = get_portid(node, &cmpnode)) == -1) { cmn_err(CE_PANIC, "portid not found"); } if (GETPROP(node, "cpuid", (caddr_t)&cpuid) == -1) { cpuid = portid; } if (cpuid < 0 || cpuid >= NCPU) { cmn_err(CE_PANIC, "cpu node %x: cpuid %d out of range", node, cpuid); return; } cpunode = &cpunodes[cpuid]; cpunode->portid = portid; if (cpu_get_cpu_unum(cpuid, unum, UNUM_NAMLEN, &size) != 0) { cpunode->fru_fmri[0] = '\0'; } else { (void) snprintf(cpunode->fru_fmri, sizeof (cpunode->fru_fmri), "%s%s", CPU_FRU_FMRI, unum); } (void) GETPROP(node, (cmpnode ? "compatible" : "name"), namebuf); namebufp = namebuf; if (strncmp(namebufp, "SUNW,", 5) == 0) namebufp += 5; (void) strcpy(cpunode->name, namebufp); (void) GETPROP(node, "implementation#", (caddr_t)&cpunode->implementation); (void) GETPROP(node, "mask#", (caddr_t)&cpunode->version); if (IS_CHEETAH(cpunode->implementation)) { /* remap mask reg */ cpunode->version = REMAP_CHEETAH_MASK(cpunode->version); } if (GETPROP(node, "clock-frequency", (caddr_t)&clk_freq) == -1) { /* * If we didn't find it in the CPU node, look in the root node. */ dnode_t root = prom_nextnode((dnode_t)0); if (GETPROP(root, "clock-frequency", (caddr_t)&clk_freq) == -1) clk_freq = 0; } cpunode->clock_freq = clk_freq; ASSERT(cpunode->clock_freq != 0); /* * Compute scaling factor based on rate of %tick. This is used * to convert from ticks derived from %tick to nanoseconds. See * comment in sun4u/sys/clock.h for details. */ cpunode->tick_nsec_scale = (uint_t)(((uint64_t)NANOSEC << (32 - TICK_NSEC_SHIFT)) / cpunode->clock_freq); (void) GETPROP(node, "#itlb-entries", (caddr_t)&tlbsize); ASSERT(tlbsize < USHRT_MAX); /* since we cast it */ cpunode->itlb_size = (ushort_t)tlbsize; (void) GETPROP(node, "#dtlb-entries", (caddr_t)&tlbsize); ASSERT(tlbsize < USHRT_MAX); /* since we cast it */ cpunode->dtlb_size = (ushort_t)tlbsize; cpunode->nodeid = node; if (cmpnode != OBP_NONODE) { /* * If the CPU has a level 3 cache, then it will be the * external cache. Otherwise the level 2 cache is the * external cache. */ size = 0; (void) GETPROP(node, "l3-cache-size", (caddr_t)&size); if (size <= 0) (void) GETPROP(node, "l2-cache-size", (caddr_t)&size); ASSERT(size != 0); cpunode->ecache_size = size; size = 0; (void) GETPROP(node, "l3-cache-line-size", (caddr_t)&size); if (size <= 0) (void) GETPROP(node, "l2-cache-line-size", (caddr_t)&size); ASSERT(size != 0); cpunode->ecache_linesize = size; size = 0; (void) GETPROP(node, "l2-cache-associativity", (caddr_t)&size); ASSERT(size != 0); cpunode->ecache_associativity = size; cmp_add_cpu(portid, cpuid); } else { size = 0; (void) GETPROP(node, "ecache-size", (caddr_t)&size); ASSERT(size != 0); cpunode->ecache_size = size; size = 0; (void) GETPROP(node, "ecache-line-size", (caddr_t)&size); ASSERT(size != 0); cpunode->ecache_linesize = size; size = 0; (void) GETPROP(node, "ecache-associativity", (caddr_t)&size); ASSERT(size != 0); cpunode->ecache_associativity = size; } /* by default set msram to non-mirrored one */ cpunode->msram = ECACHE_CPU_NON_MIRROR; if (GETPROPLEN(node, "msram") != -1) { cpunode->msram = ECACHE_CPU_MIRROR; } if (GETPROPLEN(node, "msram-observed") != -1) { cpunode->msram = ECACHE_CPU_MIRROR; } if (ncpunode == 0) { cpu_fiximp(node); } cpunode->ecache_setsize = cpunode->ecache_size / cpunode->ecache_associativity; adj_ecache_setsize(cpunode->ecache_setsize); ncpunode++; } int get_portid_ddi(dev_info_t *dip, dev_info_t **cmpp) { int portid; char dev_type[OBP_MAXPROPNAME]; int len = OBP_MAXPROPNAME; if (cmpp != NULL) *cmpp = NULL; if ((portid = ddi_prop_get_int(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "portid", -1)) != -1) return (portid); if ((portid = ddi_prop_get_int(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "upa-portid", -1)) != -1) return (portid); if (ddi_prop_op(DDI_DEV_T_ANY, dip, PROP_LEN_AND_VAL_BUF, DDI_PROP_DONTPASS, "device_type", (caddr_t)dev_type, &len) != 0) return (-1); /* On a CMP core, the "portid" is in the parent */ if (strcmp(dev_type, "cpu") == 0) { dip = ddi_get_parent(dip); if ((portid = ddi_prop_get_int(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "portid", -1)) != -1) { if (cmpp != NULL) *cmpp = dip; return (portid); } } return (-1); } /* * A hotplug version of fill_cpu(). (Doesn't assume that there's a node * in the PROM device tree for this CPU.) We still need the PROM version * since it is called very early in the boot cycle before (before * setup_ddi()). Sigh...someday this will all be cleaned up. */ void fill_cpu_ddi(dev_info_t *dip) { extern int cpu_get_cpu_unum(int, char *, int, int *); struct cpu_node *cpunode; processorid_t cpuid; int portid; int len; int tlbsize; dev_info_t *cmpnode; char namebuf[OBP_MAXPROPNAME], unum[UNUM_NAMLEN]; char *namebufp; if ((portid = get_portid_ddi(dip, &cmpnode)) == -1) { cmn_err(CE_PANIC, "portid not found"); } if ((cpuid = ddi_prop_get_int(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "cpuid", -1)) == -1) { cpuid = portid; } if (cpuid < 0 || cpuid >= NCPU) { cmn_err(CE_PANIC, "cpu dip %p: cpuid %d out of range", (void *) dip, cpuid); return; } cpunode = &cpunodes[cpuid]; cpunode->portid = portid; if (cpu_get_cpu_unum(cpuid, unum, UNUM_NAMLEN, &len) != 0) { cpunode->fru_fmri[0] = '\0'; } else { (void) snprintf(cpunode->fru_fmri, sizeof (cpunode->fru_fmri), "%s%s", CPU_FRU_FMRI, unum); } len = sizeof (namebuf); (void) ddi_prop_op(DDI_DEV_T_ANY, dip, PROP_LEN_AND_VAL_BUF, DDI_PROP_DONTPASS, (cmpnode ? "compatible" : "name"), (caddr_t)namebuf, &len); namebufp = namebuf; if (strncmp(namebufp, "SUNW,", 5) == 0) namebufp += 5; (void) strcpy(cpunode->name, namebufp); cpunode->implementation = ddi_prop_get_int(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "implementation#", 0); cpunode->version = ddi_prop_get_int(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "mask#", 0); if (IS_CHEETAH(cpunode->implementation)) { /* remap mask reg */ cpunode->version = REMAP_CHEETAH_MASK(cpunode->version); } cpunode->clock_freq = ddi_prop_get_int(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "clock-frequency", 0); ASSERT(cpunode->clock_freq != 0); /* * Compute scaling factor based on rate of %tick. This is used * to convert from ticks derived from %tick to nanoseconds. See * comment in sun4u/sys/clock.h for details. */ cpunode->tick_nsec_scale = (uint_t)(((uint64_t)NANOSEC << (32 - TICK_NSEC_SHIFT)) / cpunode->clock_freq); tlbsize = ddi_prop_get_int(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "#itlb-entries", 0); ASSERT(tlbsize < USHRT_MAX); /* since we cast it */ cpunode->itlb_size = (ushort_t)tlbsize; tlbsize = ddi_prop_get_int(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "#dtlb-entries", 0); ASSERT(tlbsize < USHRT_MAX); /* since we cast it */ cpunode->dtlb_size = (ushort_t)tlbsize; cpunode->nodeid = ddi_get_nodeid(dip); if (cmpnode != NULL) { /* * If the CPU has a level 3 cache, then that is it's * external cache. Otherwise the external cache must * be the level 2 cache. */ cpunode->ecache_size = ddi_prop_get_int(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "l3-cache-size", 0); if (cpunode->ecache_size == 0) cpunode->ecache_size = ddi_prop_get_int(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "l2-cache-size", 0); ASSERT(cpunode->ecache_size != 0); cpunode->ecache_linesize = ddi_prop_get_int(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "l3-cache-line-size", 0); if (cpunode->ecache_linesize == 0) cpunode->ecache_linesize = ddi_prop_get_int(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "l2-cache-line-size", 0); ASSERT(cpunode->ecache_linesize != 0); cpunode->ecache_associativity = ddi_prop_get_int(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "l2-cache-associativity", 0); ASSERT(cpunode->ecache_associativity != 0); cmp_add_cpu(portid, cpuid); } else { cpunode->ecache_size = ddi_prop_get_int(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "ecache-size", 0); ASSERT(cpunode->ecache_size != 0); cpunode->ecache_linesize = ddi_prop_get_int(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "ecache-line-size", 0); ASSERT(cpunode->ecache_linesize != 0); cpunode->ecache_associativity = ddi_prop_get_int(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "ecache-associativity", 0); ASSERT(cpunode->ecache_associativity != 0); } /* by default set msram to non-mirrored one */ cpunode->msram = ECACHE_CPU_NON_MIRROR; if (ddi_prop_exists(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "msram")) { cpunode->msram = ECACHE_CPU_MIRROR; } else if (ddi_prop_exists(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "msram-observed")) { cpunode->msram = ECACHE_CPU_MIRROR; } ASSERT(ncpunode > 0); /* fiximp not req'd */ cpunode->ecache_setsize = cpunode->ecache_size / cpunode->ecache_associativity; adj_ecache_setsize(cpunode->ecache_setsize); ncpunode++; } void empty_cpu(int cpuid) { bzero(&cpunodes[cpuid], sizeof (struct cpu_node)); ncpunode--; } #ifdef SF_ERRATA_30 /* call causes fp-disabled */ int spitfire_call_bug = 0; #endif #ifdef SF_V9_TABLE_28 /* fp over/underflow traps may cause wrong fsr.cexc */ int spitfire_bb_fsr_bug = 0; #endif #ifdef JALAPENO_ERRATA_85 /* * Set the values here assuming we're running 2.4 or later Jalapenos. If * not, they'll be reset below. Either way, the default can be overridden * when we read /etc/system later in boot. */ int jp_errata_85_allow_slow_scrub = 1; int jp_errata_85_enable = 0; #endif /* JALAPENO_ERRATA_85 */ static void check_cpus_ver(void) { int i; int impl, cpuid = getprocessorid(); int min_supported_rev; ASSERT(cpunodes[cpuid].nodeid != 0); impl = cpunodes[cpuid].implementation; switch (impl) { default: min_supported_rev = 0; break; case SPITFIRE_IMPL: min_supported_rev = SPITFIRE_MINREV_SUPPORTED; break; case CHEETAH_IMPL: min_supported_rev = CHEETAH_MINREV_SUPPORTED; break; } for (i = 0; i < NCPU; i++) { if (cpunodes[i].nodeid == 0) continue; if (IS_SPITFIRE(impl)) { if (cpunodes[i].version < min_supported_rev) { cmn_err(CE_PANIC, "UltraSPARC versions older than %d.%d" " are no longer supported (cpu #%d)", SPITFIRE_MAJOR_VERSION(min_supported_rev), SPITFIRE_MINOR_VERSION(min_supported_rev), i); } /* * Min supported rev is 2.1 but we've seen problems * with that so we still want to warn if we see one. */ if (cpunodes[i].version < 0x22) { cmn_err(CE_WARN, "UltraSPARC versions older than " "2.2 are not supported (cpu #%d)", i); #ifdef SF_ERRATA_30 /* call causes fp-disabled */ spitfire_call_bug = 1; #endif /* SF_ERRATA_30 */ } } #ifdef SF_V9_TABLE_28 /* fp over/underflow traps may cause wrong fsr.cexc */ if (IS_SPITFIRE(impl) || IS_BLACKBIRD(impl)) spitfire_bb_fsr_bug = 1; #endif /* SF_V9_TABLE_28 */ if (IS_CHEETAH(impl)) { if (cpunodes[i].version < min_supported_rev) { cmn_err(CE_PANIC, "UltraSPARC-III versions older than %d.%d" " are no longer supported (cpu #%d)", CHEETAH_MAJOR_VERSION(min_supported_rev), CHEETAH_MINOR_VERSION(min_supported_rev), i); } } #ifdef JALAPENO_ERRATA_85 if (IS_JALAPENO(impl) && (cpunodes[i].version < 0x24)) { jp_errata_85_allow_slow_scrub = 0; jp_errata_85_enable = 1; } #endif /* JALAPENO_ERRATA_85 */ } } /* * Check for a legal set of CPUs. */ static void check_cpus_set(void) { int i; int impl; int npanther = 0; impl = cpunodes[getprocessorid()].implementation; switch (impl) { case CHEETAH_PLUS_IMPL: case JAGUAR_IMPL: case PANTHER_IMPL: /* * Check for a legal heterogeneous set of CPUs. */ for (i = 0; i < NCPU; i++) { if (cpunodes[i].nodeid == 0) continue; if (IS_PANTHER(cpunodes[i].implementation)) { npanther += 1; } if (!(IS_CHEETAH_PLUS(cpunodes[i].implementation) || IS_JAGUAR(cpunodes[i].implementation) || IS_PANTHER(cpunodes[i].implementation))) { use_mp = 0; break; } } break; default: /* * Check for a homogeneous set of CPUs. */ for (i = 0; i < NCPU; i++) { if (cpunodes[i].nodeid == 0) continue; if (cpunodes[i].implementation != impl) { use_mp = 0; break; } } break; } /* * Change from mmu_page_sizes from 4 to 6 for totally-Panther domains, * where npanther == ncpunode. Also, set ecache_alignsize (and a few * other globals) to the correct value for totally-Panther domains. */ if (&mmu_init_mmu_page_sizes) { (void) mmu_init_mmu_page_sizes(npanther); } if ((npanther == ncpunode) && (&cpu_fix_allpanther)) { cpu_fix_allpanther(); } /* * Set max cpus we can have based on ncpunode and use_mp */ if (use_mp) { int (*set_max_ncpus)(void); set_max_ncpus = (int (*)(void)) kobj_getsymvalue("set_platform_max_ncpus", 0); if (set_max_ncpus) { max_ncpus = set_max_ncpus(); if (max_ncpus < ncpunode) max_ncpus = ncpunode; boot_max_ncpus = ncpunode; } else { max_ncpus = ncpunode; } } else { cmn_err(CE_NOTE, "MP not supported on mismatched modules," " booting UP only"); for (i = 0; i < NCPU; i++) { if (cpunodes[i].nodeid == 0) continue; cmn_err(CE_NOTE, "cpu%d: %s version 0x%x", i, cpunodes[i].name, cpunodes[i].version); } max_ncpus = 1; } } /* * The first sysio must always programmed up for the system clock and error * handling purposes, referenced by v_sysio_addr in machdep.c. */ static void have_sbus(dnode_t node) { int size; uint_t portid; size = GETPROPLEN(node, "upa-portid"); if (size == -1 || size > sizeof (portid)) cmn_err(CE_PANIC, "upa-portid size"); if (GETPROP(node, "upa-portid", (caddr_t)&portid) == -1) cmn_err(CE_PANIC, "upa-portid"); niobus++; /* * need one physical TSB */ niommu_tsbs++; } #define IOMMU_PER_SCHIZO 2 /* * The first psycho must always programmed up for the system clock and error * handling purposes. */ static void have_pci(dnode_t node) { int size; uint_t portid; char compatible[OBP_MAXDRVNAME]; size = GETPROPLEN(node, "portid"); if (size == -1) size = GETPROPLEN(node, "upa-portid"); if (size == -1) return; if (size > sizeof (portid)) cmn_err(CE_PANIC, "portid size wrong"); if (GETPROP(node, "portid", (caddr_t)&portid) == -1) if (GETPROP(node, "upa-portid", (caddr_t)&portid) == -1) cmn_err(CE_PANIC, "portid not found"); niobus++; /* * Need two physical TSBs for Schizo compatible nodes, * one otherwise. */ compatible[0] = '\0'; (void) prom_getprop(node, OBP_COMPATIBLE, compatible); if (strcmp(compatible, "pci108e,8001") == 0) niommu_tsbs += IOMMU_PER_SCHIZO; else niommu_tsbs++; } /* * The first eeprom is used as the TOD clock, referenced * by v_eeprom_addr in locore.s. */ static void have_eeprom(dnode_t node) { int size; uint32_t eaddr; /* * "todmostek" module will be selected based on finding a "model" * property value of "mk48t59" in the "eeprom" node. */ if (tod_module_name == NULL) { char buf[MAXSYSNAME]; if ((GETPROP(node, "model", buf) != -1) && (strcmp(buf, "mk48t59") == 0)) tod_module_name = "todmostek"; } /* * If we have found two distinct eeprom's, then we're done. */ if (v_eeprom_addr && v_timecheck_addr != v_eeprom_addr) return; /* * multiple eeproms may exist but at least * one must have an "address" property */ if ((size = GETPROPLEN(node, OBP_ADDRESS)) == -1) return; if (size != sizeof (eaddr)) cmn_err(CE_PANIC, "eeprom addr size"); if (GETPROP(node, OBP_ADDRESS, (caddr_t)&eaddr) == -1) cmn_err(CE_PANIC, "eeprom addr"); /* * If we have a chosen eeprom and it is not this node, keep looking. */ if (chosen_eeprom != NULL && chosen_eeprom != node) { v_timecheck_addr = (caddr_t)eaddr; return; } v_eeprom_addr = (caddr_t)eaddr; /* * If we don't find an I/O board to use to check the clock, * we'll fall back on whichever TOD is available. */ if (v_timecheck_addr == NULL) v_timecheck_addr = v_eeprom_addr; /* * Does this eeprom have watchdog support? */ if (GETPROPLEN(node, WATCHDOG_ENABLE) != -1) watchdog_available = 1; } static void have_rtc(dnode_t node) { int size; uint32_t eaddr; /* * "ds1287" module will be selected based on finding a "model" * property value of "ds1287" in the "rtc" node. */ if (tod_module_name == NULL) { char buf[MAXSYSNAME]; if (GETPROP(node, "model", buf) != -1) { if ((strcmp(buf, "m5819p") == 0) || (strcmp(buf, "m5823") == 0)) tod_module_name = "todm5823"; else if (strcmp(buf, "ds1287") == 0) tod_module_name = "todds1287"; } } /* * XXX - drives on if address prop doesn't exist, later falls * over in tod module */ if ((size = GETPROPLEN(node, OBP_ADDRESS)) == -1) return; if (size != sizeof (eaddr)) cmn_err(CE_PANIC, "rtc addr size"); if (GETPROP(node, OBP_ADDRESS, (caddr_t)&eaddr) == -1) cmn_err(CE_PANIC, "rtc addr"); v_rtc_addr_reg = (caddr_t)eaddr; v_rtc_data_reg = (volatile unsigned char *)eaddr + 1; /* * Does this rtc have watchdog support? */ if (GETPROPLEN(node, WATCHDOG_ENABLE) != -1) watchdog_available = 1; } static void have_pmc(dnode_t node) { uint32_t vaddr; dnode_t root; /* * Watchdog property is in the root node. */ root = prom_nextnode((dnode_t)0); if (GETPROPLEN(root, WATCHDOG_ENABLE) != -1) { /* * The hardware watchdog timer resides within logical * unit 8 of SuperI/O. The address property of the node * contains the virtual address that we use to program * the timer. */ if (GETPROP(node, OBP_ADDRESS, (caddr_t)&vaddr) == -1) { watchdog_available = 0; return; } v_pmc_addr_reg = (volatile uint8_t *)vaddr; v_pmc_data_reg = (volatile uint8_t *)vaddr + 1; watchdog_available = 1; } } static void have_auxio(dnode_t node) { size_t size, n; uint32_t addr[5]; /* * Get the size of the auzio's address property. * On some platforms, the address property contains one * entry and on others it contains five entries. * In all cases, the first entries are compatible. * * This routine gets the address property for the auxio * node and stores the first entry in v_auxio_addr which * is used by the routine set_auxioreg in sun4u/ml/locore.s. */ if ((size = GETPROPLEN(node, OBP_ADDRESS)) == -1) cmn_err(CE_PANIC, "no auxio address property"); switch (n = (size / sizeof (addr[0]))) { case 1: break; case 5: break; default: cmn_err(CE_PANIC, "auxio addr has %lu entries?", n); } if (GETPROP(node, OBP_ADDRESS, (caddr_t)addr) == -1) cmn_err(CE_PANIC, "auxio addr"); v_auxio_addr = (caddr_t)addr[0]; /* make into a C pointer */ } static void have_tod(dnode_t node) { static char tod_name[MAXSYSNAME]; if (GETPROP(node, OBP_NAME, (caddr_t)tod_name) == -1) cmn_err(CE_PANIC, "tod name"); /* * This is a node with "device_type" property value of "tod". * Name of the tod module is the name from the node. */ tod_module_name = tod_name; }