/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2010 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ /* * All Rights Reserved, Copyright (c) FUJITSU LIMITED 2008 */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * Function prototypes */ static int mc_open(dev_t *, int, int, cred_t *); static int mc_close(dev_t, int, int, cred_t *); static int mc_ioctl(dev_t, int, intptr_t, int, cred_t *, int *); static int mc_attach(dev_info_t *, ddi_attach_cmd_t); static int mc_detach(dev_info_t *, ddi_detach_cmd_t); static int mc_poll_init(void); static void mc_poll_fini(void); static int mc_board_add(mc_opl_t *mcp); static int mc_board_del(mc_opl_t *mcp); static int mc_suspend(mc_opl_t *mcp, uint32_t flag); static int mc_resume(mc_opl_t *mcp, uint32_t flag); int opl_mc_suspend(void); int opl_mc_resume(void); static void insert_mcp(mc_opl_t *mcp); static void delete_mcp(mc_opl_t *mcp); static int pa_to_maddr(mc_opl_t *mcp, uint64_t pa, mc_addr_t *maddr); static int mc_rangecheck_pa(mc_opl_t *mcp, uint64_t pa); int mc_get_mem_unum(int, uint64_t, char *, int, int *); int mc_get_mem_addr(char *unum, char *sid, uint64_t offset, uint64_t *paddr); int mc_get_mem_offset(uint64_t paddr, uint64_t *offp); int mc_get_mem_sid(char *unum, char *buf, int buflen, int *lenp); int mc_get_mem_sid_dimm(mc_opl_t *mcp, char *dname, char *buf, int buflen, int *lenp); mc_dimm_info_t *mc_get_dimm_list(mc_opl_t *mcp); mc_dimm_info_t *mc_prepare_dimmlist(board_dimm_info_t *bd_dimmp); int mc_set_mem_sid(mc_opl_t *mcp, char *buf, int buflen, int lsb, int bank, uint32_t mf_type, uint32_t d_slot); static void mc_free_dimm_list(mc_dimm_info_t *d); static void mc_get_mlist(mc_opl_t *); static void mc_polling(void); static int mc_opl_get_physical_board(int); static void mc_clear_rewrite(mc_opl_t *mcp, int i); static void mc_set_rewrite(mc_opl_t *mcp, int bank, uint32_t addr, int state); static int mc_scf_log_event(mc_flt_page_t *flt_pag); #ifdef DEBUG static int mc_ioctl_debug(dev_t, int, intptr_t, int, cred_t *, int *); void mc_dump_dimm(char *buf, int dnamesz, int serialsz, int partnumsz); void mc_dump_dimm_info(board_dimm_info_t *bd_dimmp); #endif #pragma weak opl_get_physical_board extern int opl_get_physical_board(int); extern int plat_max_boards(void); /* * Configuration data structures */ static struct cb_ops mc_cb_ops = { mc_open, /* open */ mc_close, /* close */ nulldev, /* strategy */ nulldev, /* print */ nodev, /* dump */ nulldev, /* read */ nulldev, /* write */ mc_ioctl, /* ioctl */ nodev, /* devmap */ nodev, /* mmap */ nodev, /* segmap */ nochpoll, /* poll */ ddi_prop_op, /* cb_prop_op */ 0, /* streamtab */ D_MP | D_NEW | D_HOTPLUG, /* Driver compatibility flag */ CB_REV, /* rev */ nodev, /* cb_aread */ nodev /* cb_awrite */ }; static struct dev_ops mc_ops = { DEVO_REV, /* rev */ 0, /* refcnt */ ddi_getinfo_1to1, /* getinfo */ nulldev, /* identify */ nulldev, /* probe */ mc_attach, /* attach */ mc_detach, /* detach */ nulldev, /* reset */ &mc_cb_ops, /* cb_ops */ (struct bus_ops *)0, /* bus_ops */ nulldev, /* power */ ddi_quiesce_not_needed, /* quiesce */ }; /* * Driver globals */ static enum { MODEL_FF1, MODEL_FF2, MODEL_DC, MODEL_IKKAKU } plat_model = MODEL_DC; /* The default behaviour is DC */ static struct plat_model_names { const char *unit_name; const char *mem_name; } model_names[] = { { "MBU_A", "MEMB" }, { "MBU_B", "MEMB" }, { "CMU", "" }, { "MBU_A", "" } }; /* * The DIMM Names for DC platform. * The index into this table is made up of (bank, dslot), * Where dslot occupies bits 0-1 and bank occupies 2-4. */ static char *mc_dc_dimm_unum_table[OPL_MAX_DIMMS] = { /* --------CMUnn----------- */ /* --CS0-----|--CS1------ */ /* -H-|--L-- | -H- | -L-- */ "03A", "02A", "03B", "02B", /* Bank 0 (MAC 0 bank 0) */ "13A", "12A", "13B", "12B", /* Bank 1 (MAC 0 bank 1) */ "23A", "22A", "23B", "22B", /* Bank 2 (MAC 1 bank 0) */ "33A", "32A", "33B", "32B", /* Bank 3 (MAC 1 bank 1) */ "01A", "00A", "01B", "00B", /* Bank 4 (MAC 2 bank 0) */ "11A", "10A", "11B", "10B", /* Bank 5 (MAC 2 bank 1) */ "21A", "20A", "21B", "20B", /* Bank 6 (MAC 3 bank 0) */ "31A", "30A", "31B", "30B" /* Bank 7 (MAC 3 bank 1) */ }; /* * The DIMM Names for FF1/FF2/IKKAKU platforms. * The index into this table is made up of (board, bank, dslot), * Where dslot occupies bits 0-1, bank occupies 2-4 and * board occupies the bit 5. */ static char *mc_ff_dimm_unum_table[2 * OPL_MAX_DIMMS] = { /* --------CMU0---------- */ /* --CS0-----|--CS1------ */ /* -H-|--L-- | -H- | -L-- */ "03A", "02A", "03B", "02B", /* Bank 0 (MAC 0 bank 0) */ "01A", "00A", "01B", "00B", /* Bank 1 (MAC 0 bank 1) */ "13A", "12A", "13B", "12B", /* Bank 2 (MAC 1 bank 0) */ "11A", "10A", "11B", "10B", /* Bank 3 (MAC 1 bank 1) */ "23A", "22A", "23B", "22B", /* Bank 4 (MAC 2 bank 0) */ "21A", "20A", "21B", "20B", /* Bank 5 (MAC 2 bank 1) */ "33A", "32A", "33B", "32B", /* Bank 6 (MAC 3 bank 0) */ "31A", "30A", "31B", "30B", /* Bank 7 (MAC 3 bank 1) */ /* --------CMU1---------- */ /* --CS0-----|--CS1------ */ /* -H-|--L-- | -H- | -L-- */ "43A", "42A", "43B", "42B", /* Bank 0 (MAC 0 bank 0) */ "41A", "40A", "41B", "40B", /* Bank 1 (MAC 0 bank 1) */ "53A", "52A", "53B", "52B", /* Bank 2 (MAC 1 bank 0) */ "51A", "50A", "51B", "50B", /* Bank 3 (MAC 1 bank 1) */ "63A", "62A", "63B", "62B", /* Bank 4 (MAC 2 bank 0) */ "61A", "60A", "61B", "60B", /* Bank 5 (MAC 2 bank 1) */ "73A", "72A", "73B", "72B", /* Bank 6 (MAC 3 bank 0) */ "71A", "70A", "71B", "70B" /* Bank 7 (MAC 3 bank 1) */ }; #define BD_BK_SLOT_TO_INDEX(bd, bk, s) \ (((bd & 0x01) << 5) | ((bk & 0x07) << 2) | (s & 0x03)) #define INDEX_TO_BANK(i) (((i) & 0x1C) >> 2) #define INDEX_TO_SLOT(i) ((i) & 0x03) #define SLOT_TO_CS(slot) ((slot & 0x3) >> 1) /* Isolation unit size is 64 MB */ #define MC_ISOLATION_BSIZE (64 * 1024 * 1024) #define MC_MAX_SPEEDS 7 typedef struct { uint32_t mc_speeds; uint32_t mc_period; } mc_scan_speed_t; #define MC_CNTL_SPEED_SHIFT 26 /* * In mirror mode, we normalized the bank idx to "even" since * the HW treats them as one unit w.r.t programming. * This bank index will be the "effective" bank index. * All mirrored bank state info on mc_period, mc_speedup_period * will be stored in the even bank structure to avoid code duplication. */ #define MIRROR_IDX(bankidx) (bankidx & ~1) static mc_scan_speed_t mc_scan_speeds[MC_MAX_SPEEDS] = { {0x6 << MC_CNTL_SPEED_SHIFT, 0}, {0x5 << MC_CNTL_SPEED_SHIFT, 32}, {0x4 << MC_CNTL_SPEED_SHIFT, 64}, {0x3 << MC_CNTL_SPEED_SHIFT, 128}, {0x2 << MC_CNTL_SPEED_SHIFT, 256}, {0x1 << MC_CNTL_SPEED_SHIFT, 512}, {0x0 << MC_CNTL_SPEED_SHIFT, 1024} }; static uint32_t mc_max_speed = (0x6 << 26); int mc_isolation_bsize = MC_ISOLATION_BSIZE; int mc_patrol_interval_sec = MC_PATROL_INTERVAL_SEC; int mc_max_scf_retry = 16; int mc_max_scf_logs = 64; int mc_max_errlog_processed = BANKNUM_PER_SB*2; int mc_scan_period = 12 * 60 * 60; /* 12 hours period */ int mc_max_rewrite_loop = 100; int mc_rewrite_delay = 10; /* * it takes SCF about 300 m.s. to process a requst. We can bail out * if it is busy. It does not pay to wait for it too long. */ int mc_max_scf_loop = 2; int mc_scf_delay = 100; int mc_pce_dropped = 0; int mc_poll_priority = MINCLSYSPRI; int mc_max_rewrite_retry = 6 * 60; /* * Mutex hierarchy in mc-opl * If both mcmutex and mc_lock must be held, * mcmutex must be acquired first, and then mc_lock. */ static kmutex_t mcmutex; mc_opl_t *mc_instances[OPL_MAX_BOARDS]; static kmutex_t mc_polling_lock; static kcondvar_t mc_polling_cv; static kcondvar_t mc_poll_exit_cv; static int mc_poll_cmd = 0; static int mc_pollthr_running = 0; int mc_timeout_period = 0; /* this is in m.s. */ void *mc_statep; #ifdef DEBUG int oplmc_debug = 0; #endif static int mc_debug_show_all = 0; extern struct mod_ops mod_driverops; static struct modldrv modldrv = { &mod_driverops, /* module type, this one is a driver */ "OPL Memory-controller", /* module name */ &mc_ops, /* driver ops */ }; static struct modlinkage modlinkage = { MODREV_1, /* rev */ (void *)&modldrv, NULL }; #pragma weak opl_get_mem_unum #pragma weak opl_get_mem_sid #pragma weak opl_get_mem_offset #pragma weak opl_get_mem_addr extern int (*opl_get_mem_unum)(int, uint64_t, char *, int, int *); extern int (*opl_get_mem_sid)(char *unum, char *buf, int buflen, int *lenp); extern int (*opl_get_mem_offset)(uint64_t paddr, uint64_t *offp); extern int (*opl_get_mem_addr)(char *unum, char *sid, uint64_t offset, uint64_t *paddr); /* * pseudo-mc node portid format * * [10] = 0 * [9] = 1 * [8] = LSB_ID[4] = 0 * [7:4] = LSB_ID[3:0] * [3:0] = 0 * */ /* * These are the module initialization routines. */ int _init(void) { int error; int plen; char model[20]; pnode_t node; if ((error = ddi_soft_state_init(&mc_statep, sizeof (mc_opl_t), 1)) != 0) return (error); if ((error = mc_poll_init()) != 0) { ddi_soft_state_fini(&mc_statep); return (error); } mutex_init(&mcmutex, NULL, MUTEX_DRIVER, NULL); if (&opl_get_mem_unum) opl_get_mem_unum = mc_get_mem_unum; if (&opl_get_mem_sid) opl_get_mem_sid = mc_get_mem_sid; if (&opl_get_mem_offset) opl_get_mem_offset = mc_get_mem_offset; if (&opl_get_mem_addr) opl_get_mem_addr = mc_get_mem_addr; node = prom_rootnode(); plen = prom_getproplen(node, "model"); if (plen > 0 && plen < sizeof (model)) { (void) prom_getprop(node, "model", model); model[plen] = '\0'; if (strcmp(model, "FF1") == 0) plat_model = MODEL_FF1; else if (strcmp(model, "FF2") == 0) plat_model = MODEL_FF2; else if (strncmp(model, "DC", 2) == 0) plat_model = MODEL_DC; else if (strcmp(model, "IKKAKU") == 0) plat_model = MODEL_IKKAKU; } error = mod_install(&modlinkage); if (error != 0) { if (&opl_get_mem_unum) opl_get_mem_unum = NULL; if (&opl_get_mem_sid) opl_get_mem_sid = NULL; if (&opl_get_mem_offset) opl_get_mem_offset = NULL; if (&opl_get_mem_addr) opl_get_mem_addr = NULL; mutex_destroy(&mcmutex); mc_poll_fini(); ddi_soft_state_fini(&mc_statep); } return (error); } int _fini(void) { int error; if ((error = mod_remove(&modlinkage)) != 0) return (error); if (&opl_get_mem_unum) opl_get_mem_unum = NULL; if (&opl_get_mem_sid) opl_get_mem_sid = NULL; if (&opl_get_mem_offset) opl_get_mem_offset = NULL; if (&opl_get_mem_addr) opl_get_mem_addr = NULL; mutex_destroy(&mcmutex); mc_poll_fini(); ddi_soft_state_fini(&mc_statep); return (0); } int _info(struct modinfo *modinfop) { return (mod_info(&modlinkage, modinfop)); } static void mc_polling_thread() { mutex_enter(&mc_polling_lock); mc_pollthr_running = 1; while (!(mc_poll_cmd & MC_POLL_EXIT)) { mc_polling(); (void) cv_reltimedwait(&mc_polling_cv, &mc_polling_lock, mc_timeout_period, TR_CLOCK_TICK); } mc_pollthr_running = 0; /* * signal if any one is waiting for this thread to exit. */ cv_signal(&mc_poll_exit_cv); mutex_exit(&mc_polling_lock); thread_exit(); /* NOTREACHED */ } static int mc_poll_init() { mutex_init(&mc_polling_lock, NULL, MUTEX_DRIVER, NULL); cv_init(&mc_polling_cv, NULL, CV_DRIVER, NULL); cv_init(&mc_poll_exit_cv, NULL, CV_DRIVER, NULL); return (0); } static void mc_poll_fini() { mutex_enter(&mc_polling_lock); if (mc_pollthr_running) { mc_poll_cmd = MC_POLL_EXIT; cv_signal(&mc_polling_cv); while (mc_pollthr_running) { cv_wait(&mc_poll_exit_cv, &mc_polling_lock); } } mutex_exit(&mc_polling_lock); mutex_destroy(&mc_polling_lock); cv_destroy(&mc_polling_cv); cv_destroy(&mc_poll_exit_cv); } static int mc_attach(dev_info_t *devi, ddi_attach_cmd_t cmd) { mc_opl_t *mcp; int instance; int rv; /* get the instance of this devi */ instance = ddi_get_instance(devi); switch (cmd) { case DDI_ATTACH: break; case DDI_RESUME: mcp = ddi_get_soft_state(mc_statep, instance); rv = mc_resume(mcp, MC_DRIVER_SUSPENDED); return (rv); default: return (DDI_FAILURE); } if (ddi_soft_state_zalloc(mc_statep, instance) != DDI_SUCCESS) return (DDI_FAILURE); if (ddi_create_minor_node(devi, "mc-opl", S_IFCHR, instance, "ddi_mem_ctrl", 0) != DDI_SUCCESS) { MC_LOG("mc_attach: create_minor_node failed\n"); return (DDI_FAILURE); } if ((mcp = ddi_get_soft_state(mc_statep, instance)) == NULL) { goto bad; } if (mc_timeout_period == 0) { mc_patrol_interval_sec = (int)ddi_getprop(DDI_DEV_T_ANY, devi, DDI_PROP_DONTPASS, "mc-timeout-interval-sec", mc_patrol_interval_sec); mc_timeout_period = drv_usectohz(1000000 * mc_patrol_interval_sec / OPL_MAX_BOARDS); } /* set informations in mc state */ mcp->mc_dip = devi; if (mc_board_add(mcp)) goto bad; insert_mcp(mcp); /* * Start the polling thread if it is not running already. */ mutex_enter(&mc_polling_lock); if (!mc_pollthr_running) { (void) thread_create(NULL, 0, (void (*)())mc_polling_thread, NULL, 0, &p0, TS_RUN, mc_poll_priority); } mutex_exit(&mc_polling_lock); ddi_report_dev(devi); return (DDI_SUCCESS); bad: ddi_remove_minor_node(devi, NULL); ddi_soft_state_free(mc_statep, instance); return (DDI_FAILURE); } /* ARGSUSED */ static int mc_detach(dev_info_t *devi, ddi_detach_cmd_t cmd) { int rv; int instance; mc_opl_t *mcp; /* get the instance of this devi */ instance = ddi_get_instance(devi); if ((mcp = ddi_get_soft_state(mc_statep, instance)) == NULL) { return (DDI_FAILURE); } switch (cmd) { case DDI_SUSPEND: rv = mc_suspend(mcp, MC_DRIVER_SUSPENDED); return (rv); case DDI_DETACH: break; default: return (DDI_FAILURE); } delete_mcp(mcp); if (mc_board_del(mcp) != DDI_SUCCESS) { return (DDI_FAILURE); } ddi_remove_minor_node(devi, NULL); /* free up the soft state */ ddi_soft_state_free(mc_statep, instance); return (DDI_SUCCESS); } /* ARGSUSED */ static int mc_open(dev_t *devp, int flag, int otyp, cred_t *credp) { return (0); } /* ARGSUSED */ static int mc_close(dev_t devp, int flag, int otyp, cred_t *credp) { return (0); } /* ARGSUSED */ static int mc_ioctl(dev_t dev, int cmd, intptr_t arg, int mode, cred_t *credp, int *rvalp) { mc_flt_page_t flt_page; if (cmd == MCIOC_FAULT_PAGE) { if (arg == NULL) return (EINVAL); if (ddi_copyin((const void *)arg, (void *)&flt_page, sizeof (mc_flt_page_t), 0) < 0) return (EFAULT); return (mc_scf_log_event(&flt_page)); } #ifdef DEBUG return (mc_ioctl_debug(dev, cmd, arg, mode, credp, rvalp)); #else return (ENOTTY); #endif } /* * PA validity check: * This function return 1 if the PA is a valid PA * in the running Solaris instance i.e. in physinstall * Otherwise, return 0. */ /* ARGSUSED */ static int pa_is_valid(mc_opl_t *mcp, uint64_t addr) { if (mcp->mlist == NULL) mc_get_mlist(mcp); if (mcp->mlist && address_in_memlist(mcp->mlist, addr, 0)) { return (1); } return (0); } /* * mac-pa translation routines. * * Input: mc driver state, (LSB#, Bank#, DIMM address) * Output: physical address * * Valid - return value: 0 * Invalid - return value: -1 */ static int mcaddr_to_pa(mc_opl_t *mcp, mc_addr_t *maddr, uint64_t *pa) { int i; uint64_t pa_offset = 0; int cs = (maddr->ma_dimm_addr >> CS_SHIFT) & 1; int bank = maddr->ma_bank; mc_addr_t maddr1; int bank0, bank1; MC_LOG("mcaddr /LSB%d/B%d/%x\n", maddr->ma_bd, bank, maddr->ma_dimm_addr); /* loc validity check */ ASSERT(maddr->ma_bd >= 0 && OPL_BOARD_MAX > maddr->ma_bd); ASSERT(bank >= 0 && OPL_BANK_MAX > bank); /* Do translation */ for (i = 0; i < PA_BITS_FOR_MAC; i++) { int pa_bit = 0; int mc_bit = mcp->mc_trans_table[cs][i]; if (mc_bit < MC_ADDRESS_BITS) { pa_bit = (maddr->ma_dimm_addr >> mc_bit) & 1; } else if (mc_bit == MP_NONE) { pa_bit = 0; } else if (mc_bit == MP_BANK_0) { pa_bit = bank & 1; } else if (mc_bit == MP_BANK_1) { pa_bit = (bank >> 1) & 1; } else if (mc_bit == MP_BANK_2) { pa_bit = (bank >> 2) & 1; } pa_offset |= ((uint64_t)pa_bit) << i; } *pa = mcp->mc_start_address + pa_offset; MC_LOG("pa = %lx\n", *pa); if (pa_to_maddr(mcp, *pa, &maddr1) == -1) { cmn_err(CE_WARN, "mcaddr_to_pa: /LSB%d/B%d/%x failed to " "convert PA %lx\n", maddr->ma_bd, bank, maddr->ma_dimm_addr, *pa); return (-1); } /* * In mirror mode, PA is always translated to the even bank. */ if (IS_MIRROR(mcp, maddr->ma_bank)) { bank0 = maddr->ma_bank & ~(1); bank1 = maddr1.ma_bank & ~(1); } else { bank0 = maddr->ma_bank; bank1 = maddr1.ma_bank; } /* * there is no need to check ma_bd because it is generated from * mcp. They are the same. */ if ((bank0 == bank1) && (maddr->ma_dimm_addr == maddr1.ma_dimm_addr)) { return (0); } else { MC_LOG("Translation error source /LSB%d/B%d/%x, " "PA %lx, target /LSB%d/B%d/%x\n", maddr->ma_bd, bank, maddr->ma_dimm_addr, *pa, maddr1.ma_bd, maddr1.ma_bank, maddr1.ma_dimm_addr); return (-1); } } /* * PA to CS (used by pa_to_maddr). */ static int pa_to_cs(mc_opl_t *mcp, uint64_t pa_offset) { int i; int cs = 1; for (i = 0; i < PA_BITS_FOR_MAC; i++) { /* MAC address bit<29> is arranged on the same PA bit */ /* on both table. So we may use any table. */ if (mcp->mc_trans_table[0][i] == CS_SHIFT) { cs = (pa_offset >> i) & 1; break; } } return (cs); } /* * PA to DIMM (used by pa_to_maddr). */ /* ARGSUSED */ static uint32_t pa_to_dimm(mc_opl_t *mcp, uint64_t pa_offset) { int i; int cs = pa_to_cs(mcp, pa_offset); uint32_t dimm_addr = 0; for (i = 0; i < PA_BITS_FOR_MAC; i++) { int pa_bit_value = (pa_offset >> i) & 1; int mc_bit = mcp->mc_trans_table[cs][i]; if (mc_bit < MC_ADDRESS_BITS) { dimm_addr |= pa_bit_value << mc_bit; } } dimm_addr |= cs << CS_SHIFT; return (dimm_addr); } /* * PA to Bank (used by pa_to_maddr). */ static int pa_to_bank(mc_opl_t *mcp, uint64_t pa_offset) { int i; int cs = pa_to_cs(mcp, pa_offset); int bankno = mcp->mc_trans_table[cs][INDEX_OF_BANK_SUPPLEMENT_BIT]; for (i = 0; i < PA_BITS_FOR_MAC; i++) { int pa_bit_value = (pa_offset >> i) & 1; int mc_bit = mcp->mc_trans_table[cs][i]; switch (mc_bit) { case MP_BANK_0: bankno |= pa_bit_value; break; case MP_BANK_1: bankno |= pa_bit_value << 1; break; case MP_BANK_2: bankno |= pa_bit_value << 2; break; } } return (bankno); } /* * PA to MAC address translation * * Input: MAC driver state, physicall adress * Output: LSB#, Bank id, mac address * * Valid - return value: 0 * Invalid - return value: -1 */ int pa_to_maddr(mc_opl_t *mcp, uint64_t pa, mc_addr_t *maddr) { uint64_t pa_offset; if (!mc_rangecheck_pa(mcp, pa)) return (-1); /* Do translation */ pa_offset = pa - mcp->mc_start_address; maddr->ma_bd = mcp->mc_board_num; maddr->ma_phys_bd = mcp->mc_phys_board_num; maddr->ma_bank = pa_to_bank(mcp, pa_offset); maddr->ma_dimm_addr = pa_to_dimm(mcp, pa_offset); MC_LOG("pa %lx -> mcaddr /LSB%d/B%d/%x\n", pa_offset, maddr->ma_bd, maddr->ma_bank, maddr->ma_dimm_addr); return (0); } /* * UNUM format for DC is "/CMUnn/MEMxyZ", where * nn = 00..03 for DC1 and 00..07 for DC2 and 00..15 for DC3. * x = MAC 0..3 * y = 0..3 (slot info). * Z = 'A' or 'B' * * UNUM format for FF1 is "/MBU_A/MEMBx/MEMyZ", where * x = 0..3 (MEMB number) * y = 0..3 (slot info). * Z = 'A' or 'B' * * UNUM format for FF2 is "/MBU_B/MEMBx/MEMyZ", where * x = 0..7 (MEMB number) * y = 0..3 (slot info). * Z = 'A' or 'B' * * UNUM format for IKKAKU is "/MBU_A/MEMyZ", where * y = 0..3 (slot info). * Z = 'A' or 'B' * */ int mc_set_mem_unum(char *buf, int buflen, int sb, int bank, uint32_t mf_type, uint32_t d_slot) { char *dimmnm; char memb_num; int cs; int i; int j; cs = SLOT_TO_CS(d_slot); switch (plat_model) { case MODEL_DC: if (mf_type == FLT_TYPE_INTERMITTENT_CE || mf_type == FLT_TYPE_PERMANENT_CE) { i = BD_BK_SLOT_TO_INDEX(0, bank, d_slot); dimmnm = mc_dc_dimm_unum_table[i]; (void) snprintf(buf, buflen, "/%s%02d/MEM%s", model_names[plat_model].unit_name, sb, dimmnm); } else { i = BD_BK_SLOT_TO_INDEX(0, bank, 0); j = (cs == 0) ? i : i + 2; (void) snprintf(buf, buflen, "/%s%02d/MEM%s MEM%s", model_names[plat_model].unit_name, sb, mc_dc_dimm_unum_table[j], mc_dc_dimm_unum_table[j + 1]); } break; case MODEL_FF1: case MODEL_FF2: if (mf_type == FLT_TYPE_INTERMITTENT_CE || mf_type == FLT_TYPE_PERMANENT_CE) { i = BD_BK_SLOT_TO_INDEX(sb, bank, d_slot); dimmnm = mc_ff_dimm_unum_table[i]; memb_num = dimmnm[0]; (void) snprintf(buf, buflen, "/%s/%s%c/MEM%s", model_names[plat_model].unit_name, model_names[plat_model].mem_name, memb_num, &dimmnm[1]); } else { i = BD_BK_SLOT_TO_INDEX(sb, bank, 0); j = (cs == 0) ? i : i + 2; memb_num = mc_ff_dimm_unum_table[i][0], (void) snprintf(buf, buflen, "/%s/%s%c/MEM%s MEM%s", model_names[plat_model].unit_name, model_names[plat_model].mem_name, memb_num, &mc_ff_dimm_unum_table[j][1], &mc_ff_dimm_unum_table[j + 1][1]); } break; case MODEL_IKKAKU: if (mf_type == FLT_TYPE_INTERMITTENT_CE || mf_type == FLT_TYPE_PERMANENT_CE) { i = BD_BK_SLOT_TO_INDEX(sb, bank, d_slot); dimmnm = mc_ff_dimm_unum_table[i]; (void) snprintf(buf, buflen, "/%s/MEM%s", model_names[plat_model].unit_name, &dimmnm[1]); } else { i = BD_BK_SLOT_TO_INDEX(sb, bank, 0); j = (cs == 0) ? i : i + 2; memb_num = mc_ff_dimm_unum_table[i][0], (void) snprintf(buf, buflen, "/%s/MEM%s MEM%s", model_names[plat_model].unit_name, &mc_ff_dimm_unum_table[j][1], &mc_ff_dimm_unum_table[j + 1][1]); } break; default: return (-1); } return (0); } static void mc_ereport_post(mc_aflt_t *mc_aflt) { char buf[FM_MAX_CLASS]; char device_path[MAXPATHLEN]; char sid[MAXPATHLEN]; nv_alloc_t *nva = NULL; nvlist_t *ereport, *detector, *resource; errorq_elem_t *eqep; int nflts; mc_flt_stat_t *flt_stat; int i, n; int blen = MAXPATHLEN; char *p, *s = NULL; uint32_t values[2], synd[2], dslot[2]; uint64_t offset = (uint64_t)-1; int ret = -1; if (panicstr) { eqep = errorq_reserve(ereport_errorq); if (eqep == NULL) return; ereport = errorq_elem_nvl(ereport_errorq, eqep); nva = errorq_elem_nva(ereport_errorq, eqep); } else { ereport = fm_nvlist_create(nva); } /* * Create the scheme "dev" FMRI. */ detector = fm_nvlist_create(nva); resource = fm_nvlist_create(nva); nflts = mc_aflt->mflt_nflts; ASSERT(nflts >= 1 && nflts <= 2); flt_stat = mc_aflt->mflt_stat[0]; (void) ddi_pathname(mc_aflt->mflt_mcp->mc_dip, device_path); (void) fm_fmri_dev_set(detector, FM_DEV_SCHEME_VERSION, NULL, device_path, NULL); /* * Encode all the common data into the ereport. */ (void) snprintf(buf, FM_MAX_CLASS, "%s.%s-%s", MC_OPL_ERROR_CLASS, mc_aflt->mflt_is_ptrl ? MC_OPL_PTRL_SUBCLASS : MC_OPL_MI_SUBCLASS, mc_aflt->mflt_erpt_class); MC_LOG("mc_ereport_post: ereport %s\n", buf); fm_ereport_set(ereport, FM_EREPORT_VERSION, buf, fm_ena_generate(mc_aflt->mflt_id, FM_ENA_FMT1), detector, NULL); /* * Set payload. */ fm_payload_set(ereport, MC_OPL_BOARD, DATA_TYPE_UINT32, flt_stat->mf_flt_maddr.ma_bd, NULL); fm_payload_set(ereport, MC_OPL_PA, DATA_TYPE_UINT64, flt_stat->mf_flt_paddr, NULL); if (flt_stat->mf_type == FLT_TYPE_INTERMITTENT_CE || flt_stat->mf_type == FLT_TYPE_PERMANENT_CE) { fm_payload_set(ereport, MC_OPL_FLT_TYPE, DATA_TYPE_UINT8, ECC_STICKY, NULL); } for (i = 0; i < nflts; i++) values[i] = mc_aflt->mflt_stat[i]->mf_flt_maddr.ma_bank; fm_payload_set(ereport, MC_OPL_BANK, DATA_TYPE_UINT32_ARRAY, nflts, values, NULL); for (i = 0; i < nflts; i++) values[i] = mc_aflt->mflt_stat[i]->mf_cntl; fm_payload_set(ereport, MC_OPL_STATUS, DATA_TYPE_UINT32_ARRAY, nflts, values, NULL); for (i = 0; i < nflts; i++) values[i] = mc_aflt->mflt_stat[i]->mf_err_add; /* offset is set only for PCE and ICE */ if (mc_aflt->mflt_stat[0]->mf_type == FLT_TYPE_INTERMITTENT_CE || mc_aflt->mflt_stat[0]->mf_type == FLT_TYPE_PERMANENT_CE) { offset = values[0]; } fm_payload_set(ereport, MC_OPL_ERR_ADD, DATA_TYPE_UINT32_ARRAY, nflts, values, NULL); for (i = 0; i < nflts; i++) values[i] = mc_aflt->mflt_stat[i]->mf_err_log; fm_payload_set(ereport, MC_OPL_ERR_LOG, DATA_TYPE_UINT32_ARRAY, nflts, values, NULL); for (i = 0; i < nflts; i++) { flt_stat = mc_aflt->mflt_stat[i]; if (flt_stat->mf_errlog_valid) { synd[i] = flt_stat->mf_synd; dslot[i] = flt_stat->mf_dimm_slot; values[i] = flt_stat->mf_dram_place; } else { synd[i] = 0; dslot[i] = 0; values[i] = 0; } } fm_payload_set(ereport, MC_OPL_ERR_SYND, DATA_TYPE_UINT32_ARRAY, nflts, synd, NULL); fm_payload_set(ereport, MC_OPL_ERR_DIMMSLOT, DATA_TYPE_UINT32_ARRAY, nflts, dslot, NULL); fm_payload_set(ereport, MC_OPL_ERR_DRAM, DATA_TYPE_UINT32_ARRAY, nflts, values, NULL); device_path[0] = 0; p = &device_path[0]; sid[0] = 0; s = &sid[0]; ret = 0; for (i = 0; i < nflts; i++) { int bank; flt_stat = mc_aflt->mflt_stat[i]; bank = flt_stat->mf_flt_maddr.ma_bank; ret = mc_set_mem_unum(p + strlen(p), blen, flt_stat->mf_flt_maddr.ma_phys_bd, bank, flt_stat->mf_type, flt_stat->mf_dimm_slot); if (ret != 0) { cmn_err(CE_WARN, "mc_ereport_post: Failed to determine the unum " "for board=%d bank=%d type=0x%x slot=0x%x", flt_stat->mf_flt_maddr.ma_bd, bank, flt_stat->mf_type, flt_stat->mf_dimm_slot); continue; } n = strlen(device_path); blen = MAXPATHLEN - n; p = &device_path[n]; if (i < (nflts - 1)) { (void) snprintf(p, blen, " "); blen--; p++; } if (ret == 0) { ret = mc_set_mem_sid(mc_aflt->mflt_mcp, s + strlen(s), blen, flt_stat->mf_flt_maddr.ma_phys_bd, bank, flt_stat->mf_type, flt_stat->mf_dimm_slot); } } (void) fm_fmri_mem_set(resource, FM_MEM_SCHEME_VERSION, NULL, device_path, (ret == 0) ? sid : NULL, (ret == 0) ? offset : (uint64_t)-1); fm_payload_set(ereport, MC_OPL_RESOURCE, DATA_TYPE_NVLIST, resource, NULL); if (panicstr) { errorq_commit(ereport_errorq, eqep, ERRORQ_SYNC); } else { (void) fm_ereport_post(ereport, EVCH_TRYHARD); fm_nvlist_destroy(ereport, FM_NVA_FREE); fm_nvlist_destroy(detector, FM_NVA_FREE); fm_nvlist_destroy(resource, FM_NVA_FREE); } } static void mc_err_drain(mc_aflt_t *mc_aflt) { int rv; uint64_t pa = (uint64_t)(-1); int i; MC_LOG("mc_err_drain: %s\n", mc_aflt->mflt_erpt_class); /* * we come here only when we have: * In mirror mode: MUE, SUE * In normal mode: UE, Permanent CE, Intermittent CE */ for (i = 0; i < mc_aflt->mflt_nflts; i++) { rv = mcaddr_to_pa(mc_aflt->mflt_mcp, &(mc_aflt->mflt_stat[i]->mf_flt_maddr), &pa); /* Ensure the pa is valid (not in isolated memory block) */ if (rv == 0 && pa_is_valid(mc_aflt->mflt_mcp, pa)) mc_aflt->mflt_stat[i]->mf_flt_paddr = pa; else mc_aflt->mflt_stat[i]->mf_flt_paddr = (uint64_t)-1; } MC_LOG("mc_err_drain:pa = %lx\n", pa); switch (page_retire_check(pa, NULL)) { case 0: case EAGAIN: MC_LOG("Page retired or pending\n"); return; case EIO: /* * Do page retirement except for the PCE and ICE cases. * This is taken care by the OPL DE */ if (mc_aflt->mflt_stat[0]->mf_type != FLT_TYPE_INTERMITTENT_CE && mc_aflt->mflt_stat[0]->mf_type != FLT_TYPE_PERMANENT_CE) { MC_LOG("offline page at pa %lx error %x\n", pa, mc_aflt->mflt_pr); (void) page_retire(pa, mc_aflt->mflt_pr); } break; case EINVAL: default: /* * Some memory do not have page structure so * we keep going in case of EINVAL. */ break; } for (i = 0; i < mc_aflt->mflt_nflts; i++) { mc_aflt_t mc_aflt0; if (mc_aflt->mflt_stat[i]->mf_flt_paddr != (uint64_t)-1) { mc_aflt0 = *mc_aflt; mc_aflt0.mflt_nflts = 1; mc_aflt0.mflt_stat[0] = mc_aflt->mflt_stat[i]; mc_ereport_post(&mc_aflt0); } } } /* * The restart address is actually defined in unit of PA[37:6] * the mac patrol will convert that to dimm offset. If the * address is not in the bank, it will continue to search for * the next PA that is within the bank. * * Also the mac patrol scans the dimms based on PA, not * dimm offset. */ static int restart_patrol(mc_opl_t *mcp, int bank, mc_rsaddr_info_t *rsaddr_info) { uint64_t pa; int rv; if (MC_REWRITE_MODE(mcp, bank)) { return (0); } if (rsaddr_info == NULL || (rsaddr_info->mi_valid == 0)) { MAC_PTRL_START(mcp, bank); return (0); } rv = mcaddr_to_pa(mcp, &rsaddr_info->mi_restartaddr, &pa); if (rv != 0) { MC_LOG("cannot convert mcaddr to pa. use auto restart\n"); MAC_PTRL_START(mcp, bank); return (0); } if (!mc_rangecheck_pa(mcp, pa)) { /* pa is not on this board, just retry */ cmn_err(CE_WARN, "restart_patrol: invalid address %lx " "on board %d\n", pa, mcp->mc_board_num); MAC_PTRL_START(mcp, bank); return (0); } MC_LOG("restart_patrol: pa = %lx\n", pa); if (!rsaddr_info->mi_injectrestart) { /* * For non-error injection restart we need to * determine if the current restart pa/page is * a "good" page. A "good" page is a page that * has not been page retired. If the current * page that contains the pa is "good", we will * do a HW auto restart and let HW patrol continue * where it last stopped. Most desired scenario. * * If the current page is not "good", we will advance * to the next page to find the next "good" page and * restart the patrol from there. */ int wrapcount = 0; uint64_t origpa = pa; while (wrapcount < 2) { if (!pa_is_valid(mcp, pa)) { /* * Not in physinstall - advance to the * next memory isolation blocksize */ MC_LOG("Invalid PA\n"); pa = roundup(pa + 1, mc_isolation_bsize); } else { int rv; if ((rv = page_retire_check(pa, NULL)) != 0 && rv != EAGAIN) { /* * The page is "good" (not retired), * we will use automatic HW restart * algorithm if this is the original * current starting page. */ if (pa == origpa) { MC_LOG("Page has no error. " "Auto restart\n"); MAC_PTRL_START(mcp, bank); return (0); } else { /* * found a subsequent good page */ break; } } /* * Skip to the next page */ pa = roundup(pa + 1, PAGESIZE); MC_LOG("Skipping bad page to %lx\n", pa); } /* Check to see if we hit the end of the memory range */ if (pa >= (mcp->mc_start_address + mcp->mc_size)) { MC_LOG("Wrap around\n"); pa = mcp->mc_start_address; wrapcount++; } } if (wrapcount > 1) { MC_LOG("Failed to find a good page. Just restart\n"); MAC_PTRL_START(mcp, bank); return (0); } } /* * We reached here either: * 1. We are doing an error injection restart that specify * the exact pa/page to restart. OR * 2. We found a subsequent good page different from the * original restart pa/page. * Restart MAC patrol: PA[37:6] */ MC_LOG("restart at pa = %lx\n", pa); ST_MAC_REG(MAC_RESTART_ADD(mcp, bank), MAC_RESTART_PA(pa)); MAC_PTRL_START_ADD(mcp, bank); return (0); } static void mc_retry_info_put(mc_retry_info_t **q, mc_retry_info_t *p) { ASSERT(p != NULL); p->ri_next = *q; *q = p; } static mc_retry_info_t * mc_retry_info_get(mc_retry_info_t **q) { mc_retry_info_t *p; if ((p = *q) != NULL) { *q = p->ri_next; return (p); } else { return (NULL); } } /* * Rewriting is used for two purposes. * - to correct the error in memory. * - to determine whether the error is permanent or intermittent. * It's done by writing the address in MAC_BANKm_REWRITE_ADD * and issuing REW_REQ command in MAC_BANKm_PTRL_CNRL. After that, * REW_END (and REW_CE/REW_UE if some error detected) is set when * rewrite operation is done. See 4.7.3 and 4.7.11 in Columbus2 PRM. * * Note that rewrite operation doesn't change RAW_UE to Marked UE. * Therefore, we use it only CE case. */ static uint32_t do_rewrite(mc_opl_t *mcp, int bank, uint32_t dimm_addr, int retrying) { uint32_t cntl; int count = 0; int max_count; int retry_state; if (retrying) max_count = 1; else max_count = mc_max_rewrite_loop; retry_state = RETRY_STATE_PENDING; if (!retrying && MC_REWRITE_MODE(mcp, bank)) { goto timeout; } retry_state = RETRY_STATE_ACTIVE; /* first wait to make sure PTRL_STATUS is 0 */ while (count++ < max_count) { cntl = LD_MAC_REG(MAC_PTRL_CNTL(mcp, bank)); if (!(cntl & MAC_CNTL_PTRL_STATUS)) { count = 0; break; } drv_usecwait(mc_rewrite_delay); } if (count >= max_count) goto timeout; count = 0; ST_MAC_REG(MAC_REWRITE_ADD(mcp, bank), dimm_addr); MAC_REW_REQ(mcp, bank); retry_state = RETRY_STATE_REWRITE; do { if (count++ > max_count) { goto timeout; } else { drv_usecwait(mc_rewrite_delay); } cntl = LD_MAC_REG(MAC_PTRL_CNTL(mcp, bank)); /* * If there are other MEMORY or PCI activities, this * will be BUSY, else it should be set immediately */ } while (!(cntl & MAC_CNTL_REW_END)); MAC_CLEAR_ERRS(mcp, bank, MAC_CNTL_REW_ERRS); return (cntl); timeout: mc_set_rewrite(mcp, bank, dimm_addr, retry_state); return (0); } void mc_clear_rewrite(mc_opl_t *mcp, int bank) { struct mc_bank *bankp; mc_retry_info_t *retry; uint32_t rew_addr; bankp = &(mcp->mc_bank[bank]); retry = bankp->mcb_active; bankp->mcb_active = NULL; mc_retry_info_put(&bankp->mcb_retry_freelist, retry); again: bankp->mcb_rewrite_count = 0; while (retry = mc_retry_info_get(&bankp->mcb_retry_pending)) { rew_addr = retry->ri_addr; mc_retry_info_put(&bankp->mcb_retry_freelist, retry); if (do_rewrite(mcp, bank, rew_addr, 1) == 0) break; } /* we break out if no more pending rewrite or we got timeout again */ if (!bankp->mcb_active && !bankp->mcb_retry_pending) { if (!IS_MIRROR(mcp, bank)) { MC_CLEAR_REWRITE_MODE(mcp, bank); } else { int mbank = bank ^ 1; bankp = &(mcp->mc_bank[mbank]); if (!bankp->mcb_active && !bankp->mcb_retry_pending) { MC_CLEAR_REWRITE_MODE(mcp, bank); MC_CLEAR_REWRITE_MODE(mcp, mbank); } else { bank = mbank; goto again; } } } } void mc_set_rewrite(mc_opl_t *mcp, int bank, uint32_t addr, int state) { mc_retry_info_t *retry; struct mc_bank *bankp; bankp = &mcp->mc_bank[bank]; retry = mc_retry_info_get(&bankp->mcb_retry_freelist); if (retry == NULL) { mc_addr_t maddr; uint64_t paddr; /* * previous rewrite request has not completed yet. * So we discard this rewrite request. */ maddr.ma_bd = mcp->mc_board_num; maddr.ma_bank = bank; maddr.ma_dimm_addr = addr; if (mcaddr_to_pa(mcp, &maddr, &paddr) == 0) { cmn_err(CE_WARN, "Discard CE rewrite request" " for 0x%lx (/LSB%d/B%d/%x).\n", paddr, mcp->mc_board_num, bank, addr); } else { cmn_err(CE_WARN, "Discard CE rewrite request" " for /LSB%d/B%d/%x.\n", mcp->mc_board_num, bank, addr); } return; } retry->ri_addr = addr; retry->ri_state = state; MC_SET_REWRITE_MODE(mcp, bank); if ((state > RETRY_STATE_PENDING)) { ASSERT(bankp->mcb_active == NULL); bankp->mcb_active = retry; } else { mc_retry_info_put(&bankp->mcb_retry_pending, retry); } if (IS_MIRROR(mcp, bank)) { int mbank = bank ^1; MC_SET_REWRITE_MODE(mcp, mbank); } } void mc_process_scf_log(mc_opl_t *mcp) { int count; int n = 0; scf_log_t *p; int bank; for (bank = 0; bank < BANKNUM_PER_SB; bank++) { while ((p = mcp->mc_scf_log[bank]) != NULL && (n < mc_max_errlog_processed)) { ASSERT(bank == p->sl_bank); count = 0; while ((LD_MAC_REG(MAC_STATIC_ERR_ADD(mcp, p->sl_bank)) & MAC_STATIC_ERR_VLD)) { if (count++ >= (mc_max_scf_loop)) { break; } drv_usecwait(mc_scf_delay); } if (count < mc_max_scf_loop) { ST_MAC_REG(MAC_STATIC_ERR_LOG(mcp, p->sl_bank), p->sl_err_log); ST_MAC_REG(MAC_STATIC_ERR_ADD(mcp, p->sl_bank), p->sl_err_add|MAC_STATIC_ERR_VLD); mcp->mc_scf_retry[bank] = 0; } else { /* * if we try too many times, just drop the req */ if (mcp->mc_scf_retry[bank]++ <= mc_max_scf_retry) { return; } else { if ((++mc_pce_dropped & 0xff) == 0) { cmn_err(CE_WARN, "Cannot " "report CE to SCF\n"); } } } n++; mcp->mc_scf_log[bank] = p->sl_next; mcp->mc_scf_total[bank]--; ASSERT(mcp->mc_scf_total[bank] >= 0); kmem_free(p, sizeof (scf_log_t)); } } } void mc_queue_scf_log(mc_opl_t *mcp, mc_flt_stat_t *flt_stat, int bank) { scf_log_t *p; if (mcp->mc_scf_total[bank] >= mc_max_scf_logs) { if ((++mc_pce_dropped & 0xff) == 0) { cmn_err(CE_WARN, "Too many CE requests.\n"); } return; } p = kmem_zalloc(sizeof (scf_log_t), KM_SLEEP); p->sl_next = 0; p->sl_err_add = flt_stat->mf_err_add; p->sl_err_log = flt_stat->mf_err_log; p->sl_bank = bank; if (mcp->mc_scf_log[bank] == NULL) { /* * we rely on mc_scf_log to detect NULL queue. * mc_scf_log_tail is irrelevant is such case. */ mcp->mc_scf_log_tail[bank] = mcp->mc_scf_log[bank] = p; } else { mcp->mc_scf_log_tail[bank]->sl_next = p; mcp->mc_scf_log_tail[bank] = p; } mcp->mc_scf_total[bank]++; } /* * This routine determines what kind of CE happens, intermittent * or permanent as follows. (See 4.7.3 in Columbus2 PRM.) * - Do rewrite by issuing REW_REQ command to MAC_PTRL_CNTL register. * - If CE is still detected on the same address even after doing * rewrite operation twice, it is determined as permanent error. * - If error is not detected anymore, it is determined as intermittent * error. * - If UE is detected due to rewrite operation, it should be treated * as UE. */ /* ARGSUSED */ static void mc_scrub_ce(mc_opl_t *mcp, int bank, mc_flt_stat_t *flt_stat, int ptrl_error) { uint32_t cntl; int i; flt_stat->mf_type = FLT_TYPE_PERMANENT_CE; /* * rewrite request 1st time reads and correct error data * and write to DIMM. 2nd rewrite request must be issued * after REW_CE/UE/END is 0. When the 2nd request is completed, * if REW_CE = 1, then it is permanent CE. */ for (i = 0; i < 2; i++) { cntl = do_rewrite(mcp, bank, flt_stat->mf_err_add, 0); if (cntl == 0) { /* timeout case */ return; } /* * If the error becomes UE or CMPE * we return to the caller immediately. */ if (cntl & MAC_CNTL_REW_UE) { if (ptrl_error) flt_stat->mf_cntl |= MAC_CNTL_PTRL_UE; else flt_stat->mf_cntl |= MAC_CNTL_MI_UE; flt_stat->mf_type = FLT_TYPE_UE; return; } if (cntl & MAC_CNTL_REW_CMPE) { if (ptrl_error) flt_stat->mf_cntl |= MAC_CNTL_PTRL_CMPE; else flt_stat->mf_cntl |= MAC_CNTL_MI_CMPE; flt_stat->mf_type = FLT_TYPE_CMPE; return; } } if (!(cntl & MAC_CNTL_REW_CE)) { flt_stat->mf_type = FLT_TYPE_INTERMITTENT_CE; } if (flt_stat->mf_type == FLT_TYPE_PERMANENT_CE) { /* report PERMANENT_CE to SP via SCF */ if (!(flt_stat->mf_err_log & MAC_ERR_LOG_INVALID)) { mc_queue_scf_log(mcp, flt_stat, bank); } } } #define IS_CMPE(cntl, f) ((cntl) & ((f) ? MAC_CNTL_PTRL_CMPE :\ MAC_CNTL_MI_CMPE)) #define IS_UE(cntl, f) ((cntl) & ((f) ? MAC_CNTL_PTRL_UE : MAC_CNTL_MI_UE)) #define IS_CE(cntl, f) ((cntl) & ((f) ? MAC_CNTL_PTRL_CE : MAC_CNTL_MI_CE)) #define IS_OK(cntl, f) (!((cntl) & ((f) ? MAC_CNTL_PTRL_ERRS : \ MAC_CNTL_MI_ERRS))) static int IS_CE_ONLY(uint32_t cntl, int ptrl_error) { if (ptrl_error) { return ((cntl & MAC_CNTL_PTRL_ERRS) == MAC_CNTL_PTRL_CE); } else { return ((cntl & MAC_CNTL_MI_ERRS) == MAC_CNTL_MI_CE); } } void mc_write_cntl(mc_opl_t *mcp, int bank, uint32_t value) { int ebank = (IS_MIRROR(mcp, bank)) ? MIRROR_IDX(bank) : bank; if (mcp->mc_speedup_period[ebank] > 0) value |= mc_max_speed; else value |= mcp->mc_speed; ST_MAC_REG(MAC_PTRL_CNTL(mcp, bank), value); } static void mc_read_ptrl_reg(mc_opl_t *mcp, int bank, mc_flt_stat_t *flt_stat) { flt_stat->mf_cntl = LD_MAC_REG(MAC_PTRL_CNTL(mcp, bank)) & MAC_CNTL_PTRL_ERRS; flt_stat->mf_err_add = LD_MAC_REG(MAC_PTRL_ERR_ADD(mcp, bank)); flt_stat->mf_err_log = LD_MAC_REG(MAC_PTRL_ERR_LOG(mcp, bank)); flt_stat->mf_flt_maddr.ma_bd = mcp->mc_board_num; flt_stat->mf_flt_maddr.ma_phys_bd = mcp->mc_phys_board_num; flt_stat->mf_flt_maddr.ma_bank = bank; flt_stat->mf_flt_maddr.ma_dimm_addr = flt_stat->mf_err_add; } static void mc_read_mi_reg(mc_opl_t *mcp, int bank, mc_flt_stat_t *flt_stat) { uint32_t status, old_status; status = LD_MAC_REG(MAC_PTRL_CNTL(mcp, bank)) & MAC_CNTL_MI_ERRS; old_status = 0; /* we keep reading until the status is stable */ while (old_status != status) { old_status = status; flt_stat->mf_err_add = LD_MAC_REG(MAC_MI_ERR_ADD(mcp, bank)); flt_stat->mf_err_log = LD_MAC_REG(MAC_MI_ERR_LOG(mcp, bank)); status = LD_MAC_REG(MAC_PTRL_CNTL(mcp, bank)) & MAC_CNTL_MI_ERRS; if (status == old_status) { break; } } flt_stat->mf_cntl = status; flt_stat->mf_flt_maddr.ma_bd = mcp->mc_board_num; flt_stat->mf_flt_maddr.ma_phys_bd = mcp->mc_phys_board_num; flt_stat->mf_flt_maddr.ma_bank = bank; flt_stat->mf_flt_maddr.ma_dimm_addr = flt_stat->mf_err_add; } /* * Error philosophy for mirror mode: * * PTRL (The error address for both banks are same, since ptrl stops if it * detects error.) * - Compare error log CMPE. * * - UE-UE Report MUE. No rewrite. * * - UE-* UE-(CE/OK). Rewrite to scrub UE. Report SUE. * * - CE-* CE-(CE/OK). Scrub to determine if CE is permanent. * If CE is permanent, inform SCF. Once for each * Dimm. If CE becomes UE or CMPE, go back to above. * * * MI (The error addresses for each bank are the same or different.) * - Compare error If addresses are the same. Just CMPE, so log CMPE. * If addresses are different (this could happen * as a result of scrubbing. Report each separately. * Only report error info on each side. * * - UE-UE Addresses are the same. Report MUE. * Addresses are different. Report SUE on each bank. * Rewrite to clear UE. * * - UE-* UE-(CE/OK) * Rewrite to clear UE. Report SUE for the bank. * * - CE-* CE-(CE/OK). Scrub to determine if CE is permanent. * If CE becomes UE or CMPE, go back to above. * */ static int mc_process_error_mir(mc_opl_t *mcp, mc_aflt_t *mc_aflt, mc_flt_stat_t *flt_stat) { int ptrl_error = mc_aflt->mflt_is_ptrl; int i; int rv = 0; int bank; int rewrite_timeout = 0; MC_LOG("process mirror errors cntl[0] = %x, cntl[1] = %x\n", flt_stat[0].mf_cntl, flt_stat[1].mf_cntl); if (ptrl_error) { if (((flt_stat[0].mf_cntl | flt_stat[1].mf_cntl) & MAC_CNTL_PTRL_ERRS) == 0) return (0); } else { if (((flt_stat[0].mf_cntl | flt_stat[1].mf_cntl) & MAC_CNTL_MI_ERRS) == 0) return (0); } /* * First we take care of the case of CE * because they can become UE or CMPE */ for (i = 0; i < 2; i++) { if (IS_CE_ONLY(flt_stat[i].mf_cntl, ptrl_error)) { bank = flt_stat[i].mf_flt_maddr.ma_bank; MC_LOG("CE detected on bank %d\n", bank); mc_scrub_ce(mcp, bank, &flt_stat[i], ptrl_error); if (MC_REWRITE_ACTIVE(mcp, bank)) { rewrite_timeout = 1; } rv = 1; } } if (rewrite_timeout) return (0); /* The above scrubbing can turn CE into UE or CMPE */ /* * Now we distinguish two cases: same address or not * the same address. It might seem more intuitive to * distinguish PTRL v.s. MI error but it is more * complicated that way. */ if (flt_stat[0].mf_err_add == flt_stat[1].mf_err_add) { if (IS_CMPE(flt_stat[0].mf_cntl, ptrl_error) || IS_CMPE(flt_stat[1].mf_cntl, ptrl_error)) { flt_stat[0].mf_type = FLT_TYPE_CMPE; flt_stat[1].mf_type = FLT_TYPE_CMPE; mc_aflt->mflt_erpt_class = MC_OPL_CMPE; mc_aflt->mflt_nflts = 2; mc_aflt->mflt_stat[0] = &flt_stat[0]; mc_aflt->mflt_stat[1] = &flt_stat[1]; mc_aflt->mflt_pr = PR_UE; /* * Compare error is result of MAC internal error, so * simply log it instead of publishing an ereport. SCF * diagnoses all the MAC internal and its i/f error. */ MC_LOG("cmpe error detected\n"); return (1); } if (IS_UE(flt_stat[0].mf_cntl, ptrl_error) && IS_UE(flt_stat[1].mf_cntl, ptrl_error)) { /* Both side are UE's */ MAC_SET_ERRLOG_INFO(&flt_stat[0]); MAC_SET_ERRLOG_INFO(&flt_stat[1]); MC_LOG("MUE detected\n"); flt_stat[0].mf_type = FLT_TYPE_MUE; flt_stat[1].mf_type = FLT_TYPE_MUE; mc_aflt->mflt_erpt_class = MC_OPL_MUE; mc_aflt->mflt_nflts = 2; mc_aflt->mflt_stat[0] = &flt_stat[0]; mc_aflt->mflt_stat[1] = &flt_stat[1]; mc_aflt->mflt_pr = PR_UE; mc_err_drain(mc_aflt); return (1); } /* Now the only case is UE/CE, UE/OK, or don't care */ for (i = 0; i < 2; i++) { if (IS_UE(flt_stat[i].mf_cntl, ptrl_error)) { /* rewrite can clear the one side UE error */ if (IS_OK(flt_stat[i^1].mf_cntl, ptrl_error)) { (void) do_rewrite(mcp, flt_stat[i].mf_flt_maddr.ma_bank, flt_stat[i].mf_flt_maddr.ma_dimm_addr, 0); } flt_stat[i].mf_type = FLT_TYPE_UE; MAC_SET_ERRLOG_INFO(&flt_stat[i]); mc_aflt->mflt_erpt_class = MC_OPL_SUE; mc_aflt->mflt_stat[0] = &flt_stat[i]; mc_aflt->mflt_nflts = 1; mc_aflt->mflt_pr = PR_MCE; mc_err_drain(mc_aflt); /* Once we hit a UE/CE or UE/OK case, done */ return (1); } } } else { /* * addresses are different. That means errors * on the 2 banks are not related at all. */ for (i = 0; i < 2; i++) { if (IS_CMPE(flt_stat[i].mf_cntl, ptrl_error)) { flt_stat[i].mf_type = FLT_TYPE_CMPE; mc_aflt->mflt_erpt_class = MC_OPL_CMPE; mc_aflt->mflt_nflts = 1; mc_aflt->mflt_stat[0] = &flt_stat[i]; mc_aflt->mflt_pr = PR_UE; /* * Compare error is result of MAC internal * error, so simply log it instead of * publishing an ereport. SCF diagnoses all * the MAC internal and its interface error. */ MC_LOG("cmpe error detected\n"); /* no more report on this bank */ flt_stat[i].mf_cntl = 0; rv = 1; } } /* rewrite can clear the one side UE error */ for (i = 0; i < 2; i++) { if (IS_UE(flt_stat[i].mf_cntl, ptrl_error)) { (void) do_rewrite(mcp, flt_stat[i].mf_flt_maddr.ma_bank, flt_stat[i].mf_flt_maddr.ma_dimm_addr, 0); flt_stat[i].mf_type = FLT_TYPE_UE; MAC_SET_ERRLOG_INFO(&flt_stat[i]); mc_aflt->mflt_erpt_class = MC_OPL_SUE; mc_aflt->mflt_stat[0] = &flt_stat[i]; mc_aflt->mflt_nflts = 1; mc_aflt->mflt_pr = PR_MCE; mc_err_drain(mc_aflt); rv = 1; } } } return (rv); } static void mc_error_handler_mir(mc_opl_t *mcp, int bank, mc_rsaddr_info_t *rsaddr) { mc_aflt_t mc_aflt; mc_flt_stat_t flt_stat[2], mi_flt_stat[2]; int i; int mi_valid; ASSERT(rsaddr); bzero(&mc_aflt, sizeof (mc_aflt_t)); bzero(&flt_stat, 2 * sizeof (mc_flt_stat_t)); bzero(&mi_flt_stat, 2 * sizeof (mc_flt_stat_t)); mc_aflt.mflt_mcp = mcp; mc_aflt.mflt_id = gethrtime(); /* Now read all the registers into flt_stat */ for (i = 0; i < 2; i++) { MC_LOG("Reading registers of bank %d\n", bank); /* patrol registers */ mc_read_ptrl_reg(mcp, bank, &flt_stat[i]); /* * In mirror mode, it is possible that only one bank * may report the error. We need to check for it to * ensure we pick the right addr value for patrol restart. * Note that if both banks reported errors, we pick the * 2nd one. Both banks should reported the same error address. */ if (flt_stat[i].mf_cntl & MAC_CNTL_PTRL_ERRS) rsaddr->mi_restartaddr = flt_stat[i].mf_flt_maddr; MC_LOG("ptrl registers cntl %x add %x log %x\n", flt_stat[i].mf_cntl, flt_stat[i].mf_err_add, flt_stat[i].mf_err_log); /* MI registers */ mc_read_mi_reg(mcp, bank, &mi_flt_stat[i]); MC_LOG("MI registers cntl %x add %x log %x\n", mi_flt_stat[i].mf_cntl, mi_flt_stat[i].mf_err_add, mi_flt_stat[i].mf_err_log); bank = bank^1; } /* clear errors once we read all the registers */ MAC_CLEAR_ERRS(mcp, bank, (MAC_CNTL_PTRL_ERRS|MAC_CNTL_MI_ERRS)); MAC_CLEAR_ERRS(mcp, bank ^ 1, (MAC_CNTL_PTRL_ERRS|MAC_CNTL_MI_ERRS)); /* Process MI errors first */ /* if not error mode, cntl1 is 0 */ if ((mi_flt_stat[0].mf_err_add & MAC_ERR_ADD_INVALID) || (mi_flt_stat[0].mf_err_log & MAC_ERR_LOG_INVALID)) mi_flt_stat[0].mf_cntl = 0; if ((mi_flt_stat[1].mf_err_add & MAC_ERR_ADD_INVALID) || (mi_flt_stat[1].mf_err_log & MAC_ERR_LOG_INVALID)) mi_flt_stat[1].mf_cntl = 0; mc_aflt.mflt_is_ptrl = 0; mi_valid = mc_process_error_mir(mcp, &mc_aflt, &mi_flt_stat[0]); if ((((flt_stat[0].mf_cntl & MAC_CNTL_PTRL_ERRS) >> MAC_CNTL_PTRL_ERR_SHIFT) == ((mi_flt_stat[0].mf_cntl & MAC_CNTL_MI_ERRS) >> MAC_CNTL_MI_ERR_SHIFT)) && (flt_stat[0].mf_err_add == ROUNDDOWN(mi_flt_stat[0].mf_err_add, MC_BOUND_BYTE)) && (((flt_stat[1].mf_cntl & MAC_CNTL_PTRL_ERRS) >> MAC_CNTL_PTRL_ERR_SHIFT) == ((mi_flt_stat[1].mf_cntl & MAC_CNTL_MI_ERRS) >> MAC_CNTL_MI_ERR_SHIFT)) && (flt_stat[1].mf_err_add == ROUNDDOWN(mi_flt_stat[1].mf_err_add, MC_BOUND_BYTE))) { #ifdef DEBUG MC_LOG("discarding PTRL error because " "it is the same as MI\n"); #endif rsaddr->mi_valid = mi_valid; return; } /* if not error mode, cntl1 is 0 */ if ((flt_stat[0].mf_err_add & MAC_ERR_ADD_INVALID) || (flt_stat[0].mf_err_log & MAC_ERR_LOG_INVALID)) flt_stat[0].mf_cntl = 0; if ((flt_stat[1].mf_err_add & MAC_ERR_ADD_INVALID) || (flt_stat[1].mf_err_log & MAC_ERR_LOG_INVALID)) flt_stat[1].mf_cntl = 0; mc_aflt.mflt_is_ptrl = 1; rsaddr->mi_valid = mc_process_error_mir(mcp, &mc_aflt, &flt_stat[0]); } static int mc_process_error(mc_opl_t *mcp, int bank, mc_aflt_t *mc_aflt, mc_flt_stat_t *flt_stat) { int ptrl_error = mc_aflt->mflt_is_ptrl; int rv = 0; mc_aflt->mflt_erpt_class = NULL; if (IS_UE(flt_stat->mf_cntl, ptrl_error)) { MC_LOG("UE detected\n"); flt_stat->mf_type = FLT_TYPE_UE; mc_aflt->mflt_erpt_class = MC_OPL_UE; mc_aflt->mflt_pr = PR_UE; MAC_SET_ERRLOG_INFO(flt_stat); rv = 1; } else if (IS_CE(flt_stat->mf_cntl, ptrl_error)) { MC_LOG("CE detected\n"); MAC_SET_ERRLOG_INFO(flt_stat); /* Error type can change after scrubbing */ mc_scrub_ce(mcp, bank, flt_stat, ptrl_error); if (MC_REWRITE_ACTIVE(mcp, bank)) { return (0); } if (flt_stat->mf_type == FLT_TYPE_INTERMITTENT_CE) { mc_aflt->mflt_erpt_class = MC_OPL_ICE; mc_aflt->mflt_pr = PR_MCE; } else if (flt_stat->mf_type == FLT_TYPE_PERMANENT_CE) { mc_aflt->mflt_erpt_class = MC_OPL_CE; mc_aflt->mflt_pr = PR_MCE; } else if (flt_stat->mf_type == FLT_TYPE_UE) { mc_aflt->mflt_erpt_class = MC_OPL_UE; mc_aflt->mflt_pr = PR_UE; } rv = 1; } MC_LOG("mc_process_error: fault type %x erpt %s\n", flt_stat->mf_type, mc_aflt->mflt_erpt_class); if (mc_aflt->mflt_erpt_class) { mc_aflt->mflt_stat[0] = flt_stat; mc_aflt->mflt_nflts = 1; mc_err_drain(mc_aflt); } return (rv); } static void mc_error_handler(mc_opl_t *mcp, int bank, mc_rsaddr_info_t *rsaddr) { mc_aflt_t mc_aflt; mc_flt_stat_t flt_stat, mi_flt_stat; int mi_valid; bzero(&mc_aflt, sizeof (mc_aflt_t)); bzero(&flt_stat, sizeof (mc_flt_stat_t)); bzero(&mi_flt_stat, sizeof (mc_flt_stat_t)); mc_aflt.mflt_mcp = mcp; mc_aflt.mflt_id = gethrtime(); /* patrol registers */ mc_read_ptrl_reg(mcp, bank, &flt_stat); ASSERT(rsaddr); rsaddr->mi_restartaddr = flt_stat.mf_flt_maddr; MC_LOG("ptrl registers cntl %x add %x log %x\n", flt_stat.mf_cntl, flt_stat.mf_err_add, flt_stat.mf_err_log); /* MI registers */ mc_read_mi_reg(mcp, bank, &mi_flt_stat); MC_LOG("MI registers cntl %x add %x log %x\n", mi_flt_stat.mf_cntl, mi_flt_stat.mf_err_add, mi_flt_stat.mf_err_log); /* clear errors once we read all the registers */ MAC_CLEAR_ERRS(mcp, bank, (MAC_CNTL_PTRL_ERRS|MAC_CNTL_MI_ERRS)); mc_aflt.mflt_is_ptrl = 0; if ((mi_flt_stat.mf_cntl & MAC_CNTL_MI_ERRS) && ((mi_flt_stat.mf_err_add & MAC_ERR_ADD_INVALID) == 0) && ((mi_flt_stat.mf_err_log & MAC_ERR_LOG_INVALID) == 0)) { mi_valid = mc_process_error(mcp, bank, &mc_aflt, &mi_flt_stat); } if ((((flt_stat.mf_cntl & MAC_CNTL_PTRL_ERRS) >> MAC_CNTL_PTRL_ERR_SHIFT) == ((mi_flt_stat.mf_cntl & MAC_CNTL_MI_ERRS) >> MAC_CNTL_MI_ERR_SHIFT)) && (flt_stat.mf_err_add == ROUNDDOWN(mi_flt_stat.mf_err_add, MC_BOUND_BYTE))) { #ifdef DEBUG MC_LOG("discarding PTRL error because " "it is the same as MI\n"); #endif rsaddr->mi_valid = mi_valid; return; } mc_aflt.mflt_is_ptrl = 1; if ((flt_stat.mf_cntl & MAC_CNTL_PTRL_ERRS) && ((flt_stat.mf_err_add & MAC_ERR_ADD_INVALID) == 0) && ((flt_stat.mf_err_log & MAC_ERR_LOG_INVALID) == 0)) { rsaddr->mi_valid = mc_process_error(mcp, bank, &mc_aflt, &flt_stat); } } /* * memory patrol error handling algorithm: * timeout() is used to do periodic polling * This is the flow chart. * timeout -> * mc_check_errors() * if memory bank is installed, read the status register * if any error bit is set, * -> mc_error_handler() * -> read all error registers * -> mc_process_error() * determine error type * rewrite to clear error or scrub to determine CE type * inform SCF on permanent CE * -> mc_err_drain * page offline processing * -> mc_ereport_post() */ static void mc_process_rewrite(mc_opl_t *mcp, int bank) { uint32_t rew_addr, cntl; mc_retry_info_t *retry; struct mc_bank *bankp; bankp = &(mcp->mc_bank[bank]); retry = bankp->mcb_active; if (retry == NULL) return; if (retry->ri_state <= RETRY_STATE_ACTIVE) { cntl = LD_MAC_REG(MAC_PTRL_CNTL(mcp, bank)); if (cntl & MAC_CNTL_PTRL_STATUS) return; rew_addr = retry->ri_addr; ST_MAC_REG(MAC_REWRITE_ADD(mcp, bank), rew_addr); MAC_REW_REQ(mcp, bank); retry->ri_state = RETRY_STATE_REWRITE; } cntl = ldphysio(MAC_PTRL_CNTL(mcp, bank)); if (cntl & MAC_CNTL_REW_END) { MAC_CLEAR_ERRS(mcp, bank, MAC_CNTL_REW_ERRS); mc_clear_rewrite(mcp, bank); } else { /* * If the rewrite does not complete in * 1 hour, we have to consider this a HW * failure. However, there is no recovery * mechanism. The only thing we can do * to to print a warning message to the * console. We continue to increment the * counter but we only print the message * once. It will take the counter a long * time to wrap around and the user might * see a second message. In practice, * we have never hit this condition but * we have to keep the code here just in case. */ if (++mcp->mc_bank[bank].mcb_rewrite_count == mc_max_rewrite_retry) { cmn_err(CE_WARN, "Memory patrol feature is" " partly suspended on /LSB%d/B%d" " due to heavy memory load," " and it will restart" " automatically.\n", mcp->mc_board_num, bank); } } } static void mc_check_errors_func(mc_opl_t *mcp) { mc_rsaddr_info_t rsaddr_info; int i, error_count = 0; uint32_t stat, cntl; int running; int wrapped; int ebk; /* * scan errors. */ if (mcp->mc_status & MC_MEMORYLESS) return; for (i = 0; i < BANKNUM_PER_SB; i++) { if (mcp->mc_bank[i].mcb_status & BANK_INSTALLED) { if (MC_REWRITE_ACTIVE(mcp, i)) { mc_process_rewrite(mcp, i); } stat = ldphysio(MAC_PTRL_STAT(mcp, i)); cntl = ldphysio(MAC_PTRL_CNTL(mcp, i)); running = cntl & MAC_CNTL_PTRL_START; wrapped = cntl & MAC_CNTL_PTRL_ADD_MAX; /* Compute the effective bank idx */ ebk = (IS_MIRROR(mcp, i)) ? MIRROR_IDX(i) : i; if (mc_debug_show_all || stat) { MC_LOG("/LSB%d/B%d stat %x cntl %x\n", mcp->mc_board_num, i, stat, cntl); } /* * Update stats and reset flag if the HW patrol * wrapped around in its scan. */ if (wrapped) { MAC_CLEAR_MAX(mcp, i); mcp->mc_period[ebk]++; if (IS_MIRROR(mcp, i)) { MC_LOG("mirror mc period %ld on " "/LSB%d/B%d\n", mcp->mc_period[ebk], mcp->mc_board_num, i); } else { MC_LOG("mc period %ld on " "/LSB%d/B%d\n", mcp->mc_period[ebk], mcp->mc_board_num, i); } } if (running) { /* * Mac patrol HW is still running. * Normally when an error is detected, * the HW patrol will stop so that we * can collect error data for reporting. * Certain errors (MI errors) detected may not * cause the HW patrol to stop which is a * problem since we cannot read error data while * the HW patrol is running. SW is not allowed * to stop the HW patrol while it is running * as it may cause HW inconsistency. This is * described in a HW errata. * In situations where we detected errors * that may not cause the HW patrol to stop. * We speed up the HW patrol scanning in * the hope that it will find the 'real' PTRL * errors associated with the previous errors * causing the HW to finally stop so that we * can do the reporting. */ /* * Check to see if we did speed up * the HW patrol due to previous errors * detected that did not cause the patrol * to stop. We only do it if HW patrol scan * wrapped (counted as completing a 'period'). */ if (mcp->mc_speedup_period[ebk] > 0) { if (wrapped && (--mcp->mc_speedup_period[ebk] == 0)) { /* * We did try to speed up. * The speed up period has * expired and the HW patrol * is still running. The * errors must be intermittent. * We have no choice but to * ignore them, reset the scan * speed to normal and clear * the MI error bits. For * mirror mode, we need to * clear errors on both banks. */ MC_LOG("Clearing MI errors\n"); MAC_CLEAR_ERRS(mcp, i, MAC_CNTL_MI_ERRS); if (IS_MIRROR(mcp, i)) { MC_LOG("Clearing " "Mirror MI errs\n"); MAC_CLEAR_ERRS(mcp, i^1, MAC_CNTL_MI_ERRS); } } } else if (stat & MAC_STAT_MI_ERRS) { /* * MI errors detected but we cannot * report them since the HW patrol * is still running. * We will attempt to speed up the * scanning and hopefully the HW * can detect PRTL errors at the same * location that cause the HW patrol * to stop. */ mcp->mc_speedup_period[ebk] = 2; MAC_CMD(mcp, i, 0); } } else if (stat & (MAC_STAT_PTRL_ERRS | MAC_STAT_MI_ERRS)) { /* * HW Patrol has stopped and we found errors. * Proceed to collect and report error info. */ mcp->mc_speedup_period[ebk] = 0; rsaddr_info.mi_valid = 0; rsaddr_info.mi_injectrestart = 0; if (IS_MIRROR(mcp, i)) { mc_error_handler_mir(mcp, i, &rsaddr_info); } else { mc_error_handler(mcp, i, &rsaddr_info); } error_count++; (void) restart_patrol(mcp, i, &rsaddr_info); } else { /* * HW patrol scan has apparently stopped * but no errors detected/flagged. * Restart the HW patrol just to be sure. * In mirror mode, the odd bank might have * reported errors that caused the patrol to * stop. We'll defer the restart to the odd * bank in this case. */ if (!IS_MIRROR(mcp, i) || (i & 0x1)) (void) restart_patrol(mcp, i, NULL); } } } if (error_count > 0) mcp->mc_last_error += error_count; else mcp->mc_last_error = 0; } /* * mc_polling -- Check errors for only one instance, * but process errors for all instances to make sure we drain the errors * faster than they can be accumulated. * * Polling on each board should be done only once per each * mc_patrol_interval_sec. This is equivalent to setting mc_tick_left * to OPL_MAX_BOARDS and decrement by 1 on each timeout. * Once mc_tick_left becomes negative, the board becomes a candidate * for polling because it has waited for at least * mc_patrol_interval_sec's long. If mc_timeout_period is calculated * differently, this has to be updated accordingly. */ static void mc_polling(void) { int i, scan_error; mc_opl_t *mcp; scan_error = 1; for (i = 0; i < OPL_MAX_BOARDS; i++) { mutex_enter(&mcmutex); if ((mcp = mc_instances[i]) == NULL) { mutex_exit(&mcmutex); continue; } mutex_enter(&mcp->mc_lock); mutex_exit(&mcmutex); if (!(mcp->mc_status & MC_POLL_RUNNING)) { mutex_exit(&mcp->mc_lock); continue; } if (scan_error && mcp->mc_tick_left <= 0) { mc_check_errors_func((void *)mcp); mcp->mc_tick_left = OPL_MAX_BOARDS; scan_error = 0; } else { mcp->mc_tick_left--; } mc_process_scf_log(mcp); mutex_exit(&mcp->mc_lock); } } static void get_ptrl_start_address(mc_opl_t *mcp, int bank, mc_addr_t *maddr) { maddr->ma_bd = mcp->mc_board_num; maddr->ma_bank = bank; maddr->ma_dimm_addr = 0; } typedef struct mc_mem_range { uint64_t addr; uint64_t size; } mc_mem_range_t; static int get_base_address(mc_opl_t *mcp) { mc_mem_range_t *mem_range; int len; if (ddi_getlongprop(DDI_DEV_T_ANY, mcp->mc_dip, DDI_PROP_DONTPASS, "sb-mem-ranges", (caddr_t)&mem_range, &len) != DDI_SUCCESS) { return (DDI_FAILURE); } mcp->mc_start_address = mem_range->addr; mcp->mc_size = mem_range->size; kmem_free(mem_range, len); return (DDI_SUCCESS); } struct mc_addr_spec { uint32_t bank; uint32_t phys_hi; uint32_t phys_lo; }; #define REGS_PA(m, i) ((((uint64_t)m[i].phys_hi)<<32) | m[i].phys_lo) static char *mc_tbl_name[] = { "cs0-mc-pa-trans-table", "cs1-mc-pa-trans-table" }; /* * This routine performs a rangecheck for a given PA * to see if it belongs to the memory range for this board. * Return 1 if it is valid (within the range) and 0 otherwise */ static int mc_rangecheck_pa(mc_opl_t *mcp, uint64_t pa) { if ((pa < mcp->mc_start_address) || (mcp->mc_start_address + mcp->mc_size <= pa)) return (0); else return (1); } static void mc_memlist_delete(struct memlist *mlist) { struct memlist *ml; for (ml = mlist; ml; ml = mlist) { mlist = ml->ml_next; kmem_free(ml, sizeof (struct memlist)); } } static struct memlist * mc_memlist_dup(struct memlist *mlist) { struct memlist *hl = NULL, *tl, **mlp; if (mlist == NULL) return (NULL); mlp = &hl; tl = *mlp; for (; mlist; mlist = mlist->ml_next) { *mlp = kmem_alloc(sizeof (struct memlist), KM_SLEEP); (*mlp)->ml_address = mlist->ml_address; (*mlp)->ml_size = mlist->ml_size; (*mlp)->ml_prev = tl; tl = *mlp; mlp = &((*mlp)->ml_next); } *mlp = NULL; return (hl); } static struct memlist * mc_memlist_del_span(struct memlist *mlist, uint64_t base, uint64_t len) { uint64_t end; struct memlist *ml, *tl, *nlp; if (mlist == NULL) return (NULL); end = base + len; if ((end <= mlist->ml_address) || (base == end)) return (mlist); for (tl = ml = mlist; ml; tl = ml, ml = nlp) { uint64_t mend; nlp = ml->ml_next; if (end <= ml->ml_address) break; mend = ml->ml_address + ml->ml_size; if (base < mend) { if (base <= ml->ml_address) { ml->ml_address = end; if (end >= mend) ml->ml_size = 0ull; else ml->ml_size = mend - ml->ml_address; } else { ml->ml_size = base - ml->ml_address; if (end < mend) { struct memlist *nl; /* * splitting an memlist entry. */ nl = kmem_alloc(sizeof (struct memlist), KM_SLEEP); nl->ml_address = end; nl->ml_size = mend - nl->ml_address; if ((nl->ml_next = nlp) != NULL) nlp->ml_prev = nl; nl->ml_prev = ml; ml->ml_next = nl; nlp = nl; } } if (ml->ml_size == 0ull) { if (ml == mlist) { if ((mlist = nlp) != NULL) nlp->ml_prev = NULL; kmem_free(ml, sizeof (struct memlist)); if (mlist == NULL) break; ml = nlp; } else { if ((tl->ml_next = nlp) != NULL) nlp->ml_prev = tl; kmem_free(ml, sizeof (struct memlist)); ml = tl; } } } } return (mlist); } static void mc_get_mlist(mc_opl_t *mcp) { struct memlist *mlist; memlist_read_lock(); mlist = mc_memlist_dup(phys_install); memlist_read_unlock(); if (mlist) { mlist = mc_memlist_del_span(mlist, 0ull, mcp->mc_start_address); } if (mlist) { uint64_t startpa, endpa; startpa = mcp->mc_start_address + mcp->mc_size; endpa = ptob(physmax + 1); if (endpa > startpa) { mlist = mc_memlist_del_span(mlist, startpa, endpa - startpa); } } if (mlist) { mcp->mlist = mlist; } } int mc_board_add(mc_opl_t *mcp) { struct mc_addr_spec *macaddr; cs_status_t *cs_status; int len, len1, i, bk, cc; mc_rsaddr_info_t rsaddr; uint32_t mirr; int nbanks = 0; uint64_t nbytes = 0; int mirror_mode = 0; int ret; /* * Get configurations from "pseudo-mc" node which includes: * board# : LSB number * mac-addr : physical base address of MAC registers * csX-mac-pa-trans-table: translation table from DIMM address * to physical address or vice versa. */ mcp->mc_board_num = (int)ddi_getprop(DDI_DEV_T_ANY, mcp->mc_dip, DDI_PROP_DONTPASS, "board#", -1); if (mcp->mc_board_num == -1) { return (DDI_FAILURE); } /* * Get start address in this CAB. It can be gotten from * "sb-mem-ranges" property. */ if (get_base_address(mcp) == DDI_FAILURE) { return (DDI_FAILURE); } /* get mac-pa trans tables */ for (i = 0; i < MC_TT_CS; i++) { len = MC_TT_ENTRIES; cc = ddi_getlongprop_buf(DDI_DEV_T_ANY, mcp->mc_dip, DDI_PROP_DONTPASS, mc_tbl_name[i], (caddr_t)mcp->mc_trans_table[i], &len); if (cc != DDI_SUCCESS) { bzero(mcp->mc_trans_table[i], MC_TT_ENTRIES); } } mcp->mlist = NULL; mc_get_mlist(mcp); /* initialize bank informations */ cc = ddi_getlongprop(DDI_DEV_T_ANY, mcp->mc_dip, DDI_PROP_DONTPASS, "mc-addr", (caddr_t)&macaddr, &len); if (cc != DDI_SUCCESS) { cmn_err(CE_WARN, "Cannot get mc-addr. err=%d\n", cc); return (DDI_FAILURE); } cc = ddi_getlongprop(DDI_DEV_T_ANY, mcp->mc_dip, DDI_PROP_DONTPASS, "cs-status", (caddr_t)&cs_status, &len1); if (cc != DDI_SUCCESS) { if (len > 0) kmem_free(macaddr, len); cmn_err(CE_WARN, "Cannot get cs-status. err=%d\n", cc); return (DDI_FAILURE); } /* get the physical board number for a given logical board number */ mcp->mc_phys_board_num = mc_opl_get_physical_board(mcp->mc_board_num); if (mcp->mc_phys_board_num < 0) { if (len > 0) kmem_free(macaddr, len); cmn_err(CE_WARN, "Unable to obtain the physical board number"); return (DDI_FAILURE); } mutex_init(&mcp->mc_lock, NULL, MUTEX_DRIVER, NULL); for (i = 0; i < len1 / sizeof (cs_status_t); i++) { nbytes += ((uint64_t)cs_status[i].cs_avail_hi << 32) | ((uint64_t)cs_status[i].cs_avail_low); } if (len1 > 0) kmem_free(cs_status, len1); nbanks = len / sizeof (struct mc_addr_spec); if (nbanks > 0) nbytes /= nbanks; else { /* No need to free macaddr because len must be 0 */ mcp->mc_status |= MC_MEMORYLESS; return (DDI_SUCCESS); } for (i = 0; i < BANKNUM_PER_SB; i++) { mcp->mc_scf_retry[i] = 0; mcp->mc_period[i] = 0; mcp->mc_speedup_period[i] = 0; } /* * Get the memory size here. Let it be B (bytes). * Let T be the time in u.s. to scan 64 bytes. * If we want to complete 1 round of scanning in P seconds. * * B * T * 10^(-6) = P * --------------- * 64 * * T = P * 64 * 10^6 * ------------- * B * * = P * 64 * 10^6 * ------------- * B * * The timing bits are set in PTRL_CNTL[28:26] where * * 0 - 1 m.s * 1 - 512 u.s. * 10 - 256 u.s. * 11 - 128 u.s. * 100 - 64 u.s. * 101 - 32 u.s. * 110 - 0 u.s. * 111 - reserved. * * * a[0] = 110, a[1] = 101, ... a[6] = 0 * * cs-status property is int x 7 * 0 - cs# * 1 - cs-status * 2 - cs-avail.hi * 3 - cs-avail.lo * 4 - dimm-capa.hi * 5 - dimm-capa.lo * 6 - #of dimms */ if (nbytes > 0) { int i; uint64_t ms; ms = ((uint64_t)mc_scan_period * 64 * 1000000)/nbytes; mcp->mc_speed = mc_scan_speeds[MC_MAX_SPEEDS - 1].mc_speeds; for (i = 0; i < MC_MAX_SPEEDS - 1; i++) { if (ms < mc_scan_speeds[i + 1].mc_period) { mcp->mc_speed = mc_scan_speeds[i].mc_speeds; break; } } } else mcp->mc_speed = 0; for (i = 0; i < len / sizeof (struct mc_addr_spec); i++) { struct mc_bank *bankp; mc_retry_info_t *retry; uint32_t reg; int k; /* * setup bank */ bk = macaddr[i].bank; bankp = &(mcp->mc_bank[bk]); bankp->mcb_status = BANK_INSTALLED; bankp->mcb_reg_base = REGS_PA(macaddr, i); bankp->mcb_retry_freelist = NULL; bankp->mcb_retry_pending = NULL; bankp->mcb_active = NULL; retry = &bankp->mcb_retry_infos[0]; for (k = 0; k < MC_RETRY_COUNT; k++, retry++) { mc_retry_info_put(&bankp->mcb_retry_freelist, retry); } reg = LD_MAC_REG(MAC_PTRL_CNTL(mcp, bk)); bankp->mcb_ptrl_cntl = (reg & MAC_CNTL_PTRL_PRESERVE_BITS); /* * check if mirror mode */ mirr = LD_MAC_REG(MAC_MIRR(mcp, bk)); if (mirr & MAC_MIRR_MIRROR_MODE) { MC_LOG("Mirror -> /LSB%d/B%d\n", mcp->mc_board_num, bk); bankp->mcb_status |= BANK_MIRROR_MODE; mirror_mode = 1; /* * The following bit is only used for * error injection. We should clear it */ if (mirr & MAC_MIRR_BANK_EXCLUSIVE) ST_MAC_REG(MAC_MIRR(mcp, bk), 0); } /* * restart if not mirror mode or the other bank * of the mirror is not running */ if (!(mirr & MAC_MIRR_MIRROR_MODE) || !(mcp->mc_bank[bk^1].mcb_status & BANK_PTRL_RUNNING)) { MC_LOG("Starting up /LSB%d/B%d\n", mcp->mc_board_num, bk); get_ptrl_start_address(mcp, bk, &rsaddr.mi_restartaddr); rsaddr.mi_valid = 0; rsaddr.mi_injectrestart = 0; (void) restart_patrol(mcp, bk, &rsaddr); } else { MC_LOG("Not starting up /LSB%d/B%d\n", mcp->mc_board_num, bk); } bankp->mcb_status |= BANK_PTRL_RUNNING; } if (len > 0) kmem_free(macaddr, len); ret = ndi_prop_update_int(DDI_DEV_T_NONE, mcp->mc_dip, "mirror-mode", mirror_mode); if (ret != DDI_PROP_SUCCESS) { cmn_err(CE_WARN, "Unable to update mirror-mode property"); } mcp->mc_dimm_list = mc_get_dimm_list(mcp); /* * set interval in HZ. */ mcp->mc_last_error = 0; /* restart memory patrol checking */ mcp->mc_status |= MC_POLL_RUNNING; return (DDI_SUCCESS); } int mc_board_del(mc_opl_t *mcp) { int i; scf_log_t *p; /* * cleanup mac state */ mutex_enter(&mcp->mc_lock); if (mcp->mc_status & MC_MEMORYLESS) { mutex_exit(&mcp->mc_lock); mutex_destroy(&mcp->mc_lock); return (DDI_SUCCESS); } for (i = 0; i < BANKNUM_PER_SB; i++) { if (mcp->mc_bank[i].mcb_status & BANK_INSTALLED) { mcp->mc_bank[i].mcb_status &= ~BANK_INSTALLED; } } /* stop memory patrol checking */ mcp->mc_status &= ~MC_POLL_RUNNING; /* just throw away all the scf logs */ for (i = 0; i < BANKNUM_PER_SB; i++) { while ((p = mcp->mc_scf_log[i]) != NULL) { mcp->mc_scf_log[i] = p->sl_next; mcp->mc_scf_total[i]--; kmem_free(p, sizeof (scf_log_t)); } } if (mcp->mlist) mc_memlist_delete(mcp->mlist); if (mcp->mc_dimm_list) mc_free_dimm_list(mcp->mc_dimm_list); mutex_exit(&mcp->mc_lock); mutex_destroy(&mcp->mc_lock); return (DDI_SUCCESS); } int mc_suspend(mc_opl_t *mcp, uint32_t flag) { /* stop memory patrol checking */ mutex_enter(&mcp->mc_lock); if (mcp->mc_status & MC_MEMORYLESS) { mutex_exit(&mcp->mc_lock); return (DDI_SUCCESS); } mcp->mc_status &= ~MC_POLL_RUNNING; mcp->mc_status |= flag; mutex_exit(&mcp->mc_lock); return (DDI_SUCCESS); } void opl_mc_update_mlist(void) { int i; mc_opl_t *mcp; /* * memory information is not updated until * the post attach/detach stage during DR. * This interface is used by dr_mem to inform * mc-opl to update the mlist. */ mutex_enter(&mcmutex); for (i = 0; i < OPL_MAX_BOARDS; i++) { if ((mcp = mc_instances[i]) == NULL) continue; mutex_enter(&mcp->mc_lock); if (mcp->mlist) mc_memlist_delete(mcp->mlist); mcp->mlist = NULL; mc_get_mlist(mcp); mutex_exit(&mcp->mc_lock); } mutex_exit(&mcmutex); } /* caller must clear the SUSPEND bits or this will do nothing */ int mc_resume(mc_opl_t *mcp, uint32_t flag) { int i; uint64_t basepa; mutex_enter(&mcp->mc_lock); if (mcp->mc_status & MC_MEMORYLESS) { mutex_exit(&mcp->mc_lock); return (DDI_SUCCESS); } basepa = mcp->mc_start_address; if (get_base_address(mcp) == DDI_FAILURE) { mutex_exit(&mcp->mc_lock); return (DDI_FAILURE); } if (basepa != mcp->mc_start_address) { if (mcp->mlist) mc_memlist_delete(mcp->mlist); mcp->mlist = NULL; mc_get_mlist(mcp); } mcp->mc_status &= ~flag; if (mcp->mc_status & (MC_SOFT_SUSPENDED | MC_DRIVER_SUSPENDED)) { mutex_exit(&mcp->mc_lock); return (DDI_SUCCESS); } if (!(mcp->mc_status & MC_POLL_RUNNING)) { /* restart memory patrol checking */ mcp->mc_status |= MC_POLL_RUNNING; for (i = 0; i < BANKNUM_PER_SB; i++) { if (mcp->mc_bank[i].mcb_status & BANK_INSTALLED) { mc_check_errors_func(mcp); } } } mutex_exit(&mcp->mc_lock); return (DDI_SUCCESS); } static mc_opl_t * mc_pa_to_mcp(uint64_t pa) { mc_opl_t *mcp; int i; ASSERT(MUTEX_HELD(&mcmutex)); for (i = 0; i < OPL_MAX_BOARDS; i++) { if ((mcp = mc_instances[i]) == NULL) continue; /* if mac patrol is suspended, we cannot rely on it */ if (!(mcp->mc_status & MC_POLL_RUNNING) || (mcp->mc_status & MC_SOFT_SUSPENDED)) continue; if (mc_rangecheck_pa(mcp, pa)) { return (mcp); } } return (NULL); } /* * Get Physical Board number from Logical one. */ static int mc_opl_get_physical_board(int sb) { if (&opl_get_physical_board) { return (opl_get_physical_board(sb)); } cmn_err(CE_NOTE, "!opl_get_physical_board() not loaded\n"); return (-1); } /* ARGSUSED */ int mc_get_mem_unum(int synd_code, uint64_t flt_addr, char *buf, int buflen, int *lenp) { int i; int j; int sb; int bank; int cs; int rv = 0; mc_opl_t *mcp; char memb_num; mutex_enter(&mcmutex); if (((mcp = mc_pa_to_mcp(flt_addr)) == NULL) || (!pa_is_valid(mcp, flt_addr))) { mutex_exit(&mcmutex); if (snprintf(buf, buflen, "UNKNOWN") >= buflen) { return (ENOSPC); } else { if (lenp) *lenp = strlen(buf); } return (0); } bank = pa_to_bank(mcp, flt_addr - mcp->mc_start_address); sb = mcp->mc_phys_board_num; cs = pa_to_cs(mcp, flt_addr - mcp->mc_start_address); if (sb == -1) { mutex_exit(&mcmutex); return (ENXIO); } switch (plat_model) { case MODEL_DC: i = BD_BK_SLOT_TO_INDEX(0, bank, 0); j = (cs == 0) ? i : i + 2; (void) snprintf(buf, buflen, "/%s%02d/MEM%s MEM%s", model_names[plat_model].unit_name, sb, mc_dc_dimm_unum_table[j], mc_dc_dimm_unum_table[j + 1]); break; case MODEL_FF2: case MODEL_FF1: i = BD_BK_SLOT_TO_INDEX(sb, bank, 0); j = (cs == 0) ? i : i + 2; memb_num = mc_ff_dimm_unum_table[i][0]; (void) snprintf(buf, buflen, "/%s/%s%c/MEM%s MEM%s", model_names[plat_model].unit_name, model_names[plat_model].mem_name, memb_num, &mc_ff_dimm_unum_table[j][1], &mc_ff_dimm_unum_table[j + 1][1]); break; case MODEL_IKKAKU: i = BD_BK_SLOT_TO_INDEX(sb, bank, 0); j = (cs == 0) ? i : i + 2; (void) snprintf(buf, buflen, "/%s/MEM%s MEM%s", model_names[plat_model].unit_name, &mc_ff_dimm_unum_table[j][1], &mc_ff_dimm_unum_table[j + 1][1]); break; default: rv = ENXIO; } if (lenp) { *lenp = strlen(buf); } mutex_exit(&mcmutex); return (rv); } int opl_mc_suspend(void) { mc_opl_t *mcp; int i; mutex_enter(&mcmutex); for (i = 0; i < OPL_MAX_BOARDS; i++) { if ((mcp = mc_instances[i]) == NULL) continue; (void) mc_suspend(mcp, MC_SOFT_SUSPENDED); } mutex_exit(&mcmutex); return (0); } int opl_mc_resume(void) { mc_opl_t *mcp; int i; mutex_enter(&mcmutex); for (i = 0; i < OPL_MAX_BOARDS; i++) { if ((mcp = mc_instances[i]) == NULL) continue; (void) mc_resume(mcp, MC_SOFT_SUSPENDED); } mutex_exit(&mcmutex); return (0); } static void insert_mcp(mc_opl_t *mcp) { mutex_enter(&mcmutex); if (mc_instances[mcp->mc_board_num] != NULL) { MC_LOG("mc-opl instance for board# %d already exists\n", mcp->mc_board_num); } mc_instances[mcp->mc_board_num] = mcp; mutex_exit(&mcmutex); } static void delete_mcp(mc_opl_t *mcp) { mutex_enter(&mcmutex); mc_instances[mcp->mc_board_num] = 0; mutex_exit(&mcmutex); } /* Error injection interface */ static void mc_lock_va(uint64_t pa, caddr_t new_va) { tte_t tte; vtag_flushpage(new_va, (uint64_t)ksfmmup); sfmmu_memtte(&tte, pa >> PAGESHIFT, PROC_DATA|HAT_NOSYNC, TTE8K); tte.tte_intlo |= TTE_LCK_INT; sfmmu_dtlb_ld_kva(new_va, &tte); } static void mc_unlock_va(caddr_t va) { vtag_flushpage(va, (uint64_t)ksfmmup); } /* ARGSUSED */ int mc_inject_error(int error_type, uint64_t pa, uint32_t flags) { mc_opl_t *mcp; int bank; uint32_t dimm_addr; uint32_t cntl; mc_rsaddr_info_t rsaddr; uint32_t data, stat; int both_sides = 0; uint64_t pa0; int extra_injection_needed = 0; extern void cpu_flush_ecache(void); MC_LOG("HW mc_inject_error(%x, %lx, %x)\n", error_type, pa, flags); mutex_enter(&mcmutex); if ((mcp = mc_pa_to_mcp(pa)) == NULL) { mutex_exit(&mcmutex); MC_LOG("mc_inject_error: invalid pa\n"); return (ENOTSUP); } mutex_enter(&mcp->mc_lock); mutex_exit(&mcmutex); if (mcp->mc_status & (MC_SOFT_SUSPENDED | MC_DRIVER_SUSPENDED)) { mutex_exit(&mcp->mc_lock); MC_LOG("mc-opl has been suspended. No error injection.\n"); return (EBUSY); } /* convert pa to offset within the board */ MC_LOG("pa %lx, offset %lx\n", pa, pa - mcp->mc_start_address); if (!pa_is_valid(mcp, pa)) { mutex_exit(&mcp->mc_lock); return (EINVAL); } pa0 = pa - mcp->mc_start_address; bank = pa_to_bank(mcp, pa0); if (flags & MC_INJECT_FLAG_OTHER) bank = bank ^ 1; if (MC_INJECT_MIRROR(error_type) && !IS_MIRROR(mcp, bank)) { mutex_exit(&mcp->mc_lock); MC_LOG("Not mirror mode\n"); return (EINVAL); } dimm_addr = pa_to_dimm(mcp, pa0); MC_LOG("injecting error to /LSB%d/B%d/%x\n", mcp->mc_board_num, bank, dimm_addr); switch (error_type) { case MC_INJECT_INTERMITTENT_MCE: case MC_INJECT_PERMANENT_MCE: case MC_INJECT_MUE: both_sides = 1; } if (flags & MC_INJECT_FLAG_RESET) ST_MAC_REG(MAC_EG_CNTL(mcp, bank), 0); ST_MAC_REG(MAC_EG_ADD(mcp, bank), dimm_addr & MAC_EG_ADD_MASK); if (both_sides) { ST_MAC_REG(MAC_EG_CNTL(mcp, bank^1), 0); ST_MAC_REG(MAC_EG_ADD(mcp, bank^1), dimm_addr & MAC_EG_ADD_MASK); } switch (error_type) { case MC_INJECT_SUE: extra_injection_needed = 1; /*FALLTHROUGH*/ case MC_INJECT_UE: case MC_INJECT_MUE: if (flags & MC_INJECT_FLAG_PATH) { cntl = MAC_EG_ADD_FIX | MAC_EG_FORCE_READ00 | MAC_EG_FORCE_READ16 | MAC_EG_RDERR_ONCE; } else { cntl = MAC_EG_ADD_FIX | MAC_EG_FORCE_DERR00 | MAC_EG_FORCE_DERR16 | MAC_EG_DERR_ONCE; } flags |= MC_INJECT_FLAG_ST; break; case MC_INJECT_INTERMITTENT_CE: case MC_INJECT_INTERMITTENT_MCE: if (flags & MC_INJECT_FLAG_PATH) { cntl = MAC_EG_ADD_FIX |MAC_EG_FORCE_READ00 | MAC_EG_RDERR_ONCE; } else { cntl = MAC_EG_ADD_FIX | MAC_EG_FORCE_DERR16 | MAC_EG_DERR_ONCE; } extra_injection_needed = 1; flags |= MC_INJECT_FLAG_ST; break; case MC_INJECT_PERMANENT_CE: case MC_INJECT_PERMANENT_MCE: if (flags & MC_INJECT_FLAG_PATH) { cntl = MAC_EG_ADD_FIX | MAC_EG_FORCE_READ00 | MAC_EG_RDERR_ALWAYS; } else { cntl = MAC_EG_ADD_FIX | MAC_EG_FORCE_DERR16 | MAC_EG_DERR_ALWAYS; } flags |= MC_INJECT_FLAG_ST; break; case MC_INJECT_CMPE: data = 0xabcdefab; stphys(pa, data); cpu_flush_ecache(); MC_LOG("CMPE: writing data %x to %lx\n", data, pa); ST_MAC_REG(MAC_MIRR(mcp, bank), MAC_MIRR_BANK_EXCLUSIVE); stphys(pa, data ^ 0xffffffff); membar_sync(); cpu_flush_ecache(); ST_MAC_REG(MAC_MIRR(mcp, bank), 0); MC_LOG("CMPE: write new data %xto %lx\n", data, pa); cntl = 0; break; case MC_INJECT_NOP: cntl = 0; break; default: MC_LOG("mc_inject_error: invalid option\n"); cntl = 0; } if (cntl) { ST_MAC_REG(MAC_EG_CNTL(mcp, bank), cntl & MAC_EG_SETUP_MASK); ST_MAC_REG(MAC_EG_CNTL(mcp, bank), cntl); if (both_sides) { ST_MAC_REG(MAC_EG_CNTL(mcp, bank^1), cntl & MAC_EG_SETUP_MASK); ST_MAC_REG(MAC_EG_CNTL(mcp, bank^1), cntl); } } /* * For all injection cases except compare error, we * must write to the PA to trigger the error. */ if (flags & MC_INJECT_FLAG_ST) { data = 0xf0e0d0c0; MC_LOG("Writing %x to %lx\n", data, pa); stphys(pa, data); cpu_flush_ecache(); } if (flags & MC_INJECT_FLAG_LD) { if (flags & MC_INJECT_FLAG_PREFETCH) { /* * Use strong prefetch operation to * inject MI errors. */ page_t *pp; extern void mc_prefetch(caddr_t); MC_LOG("prefetch\n"); pp = page_numtopp_nolock(pa >> PAGESHIFT); if (pp != NULL) { caddr_t va, va1; va = ppmapin(pp, PROT_READ|PROT_WRITE, (caddr_t)-1); kpreempt_disable(); mc_lock_va((uint64_t)pa, va); va1 = va + (pa & (PAGESIZE - 1)); mc_prefetch(va1); mc_unlock_va(va); kpreempt_enable(); ppmapout(va); /* * For MI errors, we need one extra * injection for HW patrol to stop. */ extra_injection_needed = 1; } else { cmn_err(CE_WARN, "Cannot find page structure" " for PA %lx\n", pa); } } else { MC_LOG("Reading from %lx\n", pa); data = ldphys(pa); MC_LOG("data = %x\n", data); } if (extra_injection_needed) { /* * These are the injection cases where the * requested injected errors will not cause the HW * patrol to stop. For these cases, we need to inject * an extra 'real' PTRL error to force the * HW patrol to stop so that we can report the * errors injected. Note that we cannot read * and report error status while the HW patrol * is running. */ ST_MAC_REG(MAC_EG_CNTL(mcp, bank), cntl & MAC_EG_SETUP_MASK); ST_MAC_REG(MAC_EG_CNTL(mcp, bank), cntl); if (both_sides) { ST_MAC_REG(MAC_EG_CNTL(mcp, bank^1), cntl & MAC_EG_SETUP_MASK); ST_MAC_REG(MAC_EG_CNTL(mcp, bank^1), cntl); } data = 0xf0e0d0c0; MC_LOG("Writing %x to %lx\n", data, pa); stphys(pa, data); cpu_flush_ecache(); } } if (flags & MC_INJECT_FLAG_RESTART) { MC_LOG("Restart patrol\n"); rsaddr.mi_restartaddr.ma_bd = mcp->mc_board_num; rsaddr.mi_restartaddr.ma_bank = bank; rsaddr.mi_restartaddr.ma_dimm_addr = dimm_addr; rsaddr.mi_valid = 1; rsaddr.mi_injectrestart = 1; (void) restart_patrol(mcp, bank, &rsaddr); } if (flags & MC_INJECT_FLAG_POLL) { int running; int ebank = (IS_MIRROR(mcp, bank)) ? MIRROR_IDX(bank) : bank; MC_LOG("Poll patrol error\n"); stat = LD_MAC_REG(MAC_PTRL_STAT(mcp, bank)); cntl = LD_MAC_REG(MAC_PTRL_CNTL(mcp, bank)); running = cntl & MAC_CNTL_PTRL_START; if (!running && (stat & (MAC_STAT_PTRL_ERRS|MAC_STAT_MI_ERRS))) { /* * HW patrol stopped and we have errors to * report. Do it. */ mcp->mc_speedup_period[ebank] = 0; rsaddr.mi_valid = 0; rsaddr.mi_injectrestart = 0; if (IS_MIRROR(mcp, bank)) { mc_error_handler_mir(mcp, bank, &rsaddr); } else { mc_error_handler(mcp, bank, &rsaddr); } (void) restart_patrol(mcp, bank, &rsaddr); } else { /* * We are expecting to report injected * errors but the HW patrol is still running. * Speed up the scanning */ mcp->mc_speedup_period[ebank] = 2; MAC_CMD(mcp, bank, 0); (void) restart_patrol(mcp, bank, NULL); } } mutex_exit(&mcp->mc_lock); return (0); } void mc_stphysio(uint64_t pa, uint32_t data) { MC_LOG("0x%x -> pa(%lx)\n", data, pa); stphysio(pa, data); /* force the above write to be processed by mac patrol */ data = ldphysio(pa); MC_LOG("pa(%lx) = 0x%x\n", pa, data); } uint32_t mc_ldphysio(uint64_t pa) { uint32_t rv; rv = ldphysio(pa); MC_LOG("pa(%lx) = 0x%x\n", pa, rv); return (rv); } #define isdigit(ch) ((ch) >= '0' && (ch) <= '9') /* * parse_unum_memory -- extract the board number and the DIMM name from * the unum. * * Return 0 for success and non-zero for a failure. */ int parse_unum_memory(char *unum, int *board, char *dname) { char *c; char x, y, z; if ((c = strstr(unum, "CMU")) != NULL) { /* DC Model */ c += 3; *board = (uint8_t)stoi(&c); if ((c = strstr(c, "MEM")) == NULL) { return (1); } c += 3; if (strlen(c) < 3) { return (2); } if ((!isdigit(c[0])) || (!(isdigit(c[1]))) || ((c[2] != 'A') && (c[2] != 'B'))) { return (3); } x = c[0]; y = c[1]; z = c[2]; } else if ((c = strstr(unum, "MBU_")) != NULL) { /* FF1/FF2/Ikkaku Model */ c += 4; if ((c[0] != 'A') && (c[0] != 'B')) { return (4); } if (plat_model == MODEL_IKKAKU) { /* Ikkaku Model */ x = '0'; *board = 0; } else { /* FF1/FF2 Model */ if ((c = strstr(c, "MEMB")) == NULL) { return (5); } c += 4; x = c[0]; *board = ((uint8_t)stoi(&c)) / 4; } if ((c = strstr(c, "MEM")) == NULL) { return (6); } c += 3; if (strlen(c) < 2) { return (7); } if ((!isdigit(c[0])) || ((c[1] != 'A') && (c[1] != 'B'))) { return (8); } y = c[0]; z = c[1]; } else { return (9); } if (*board < 0) { return (10); } dname[0] = x; dname[1] = y; dname[2] = z; dname[3] = '\0'; return (0); } /* * mc_get_mem_sid_dimm -- Get the serial-ID for a given board and * the DIMM name. */ int mc_get_mem_sid_dimm(mc_opl_t *mcp, char *dname, char *buf, int buflen, int *lenp) { int ret = ENODEV; mc_dimm_info_t *d = NULL; if ((d = mcp->mc_dimm_list) == NULL) { MC_LOG("mc_get_mem_sid_dimm: mc_dimm_list is NULL\n"); return (EINVAL); } for (; d != NULL; d = d->md_next) { if (strcmp(d->md_dimmname, dname) == 0) { break; } } if (d != NULL) { *lenp = strlen(d->md_serial) + strlen(d->md_partnum); if (buflen <= *lenp) { cmn_err(CE_WARN, "mc_get_mem_sid_dimm: " "buflen is smaller than %d\n", *lenp); ret = ENOSPC; } else { (void) snprintf(buf, buflen, "%s:%s", d->md_serial, d->md_partnum); ret = 0; } } MC_LOG("mc_get_mem_sid_dimm: Ret=%d Name=%s Serial-ID=%s\n", ret, dname, (ret == 0) ? buf : ""); return (ret); } int mc_set_mem_sid(mc_opl_t *mcp, char *buf, int buflen, int sb, int bank, uint32_t mf_type, uint32_t d_slot) { int lenp = buflen; int id; int ret; char *dimmnm; if (mf_type == FLT_TYPE_INTERMITTENT_CE || mf_type == FLT_TYPE_PERMANENT_CE) { if (plat_model == MODEL_DC) { /* * All DC models */ id = BD_BK_SLOT_TO_INDEX(0, bank, d_slot); dimmnm = mc_dc_dimm_unum_table[id]; } else { /* * All FF and Ikkaku models */ id = BD_BK_SLOT_TO_INDEX(sb, bank, d_slot); dimmnm = mc_ff_dimm_unum_table[id]; } if ((ret = mc_get_mem_sid_dimm(mcp, dimmnm, buf, buflen, &lenp)) != 0) { return (ret); } } else { return (1); } return (0); } /* * mc_get_mem_sid -- get the DIMM serial-ID corresponding to the unum. */ int mc_get_mem_sid(char *unum, char *buf, int buflen, int *lenp) { int i; int ret = ENODEV; int board; char dname[MCOPL_MAX_DIMMNAME + 1]; mc_opl_t *mcp; MC_LOG("mc_get_mem_sid: unum=%s buflen=%d\n", unum, buflen); if ((ret = parse_unum_memory(unum, &board, dname)) != 0) { MC_LOG("mc_get_mem_sid: unum(%s) parsing failed ret=%d\n", unum, ret); return (EINVAL); } if (board < 0) { MC_LOG("mc_get_mem_sid: Invalid board=%d dimm=%s\n", board, dname); return (EINVAL); } mutex_enter(&mcmutex); /* * return ENOENT if we can not find the matching board. */ ret = ENOENT; for (i = 0; i < OPL_MAX_BOARDS; i++) { if ((mcp = mc_instances[i]) == NULL) continue; mutex_enter(&mcp->mc_lock); if (mcp->mc_phys_board_num != board) { mutex_exit(&mcp->mc_lock); continue; } ret = mc_get_mem_sid_dimm(mcp, dname, buf, buflen, lenp); if (ret == 0) { mutex_exit(&mcp->mc_lock); break; } mutex_exit(&mcp->mc_lock); } mutex_exit(&mcmutex); return (ret); } /* * mc_get_mem_offset -- get the offset in a DIMM for a given physical address. */ int mc_get_mem_offset(uint64_t paddr, uint64_t *offp) { int i; int ret = ENODEV; mc_addr_t maddr; mc_opl_t *mcp; mutex_enter(&mcmutex); for (i = 0; ((i < OPL_MAX_BOARDS) && (ret != 0)); i++) { if ((mcp = mc_instances[i]) == NULL) continue; mutex_enter(&mcp->mc_lock); if (!pa_is_valid(mcp, paddr)) { mutex_exit(&mcp->mc_lock); continue; } if (pa_to_maddr(mcp, paddr, &maddr) == 0) { *offp = maddr.ma_dimm_addr; ret = 0; } mutex_exit(&mcp->mc_lock); } mutex_exit(&mcmutex); MC_LOG("mc_get_mem_offset: Ret=%d paddr=0x%lx offset=0x%lx\n", ret, paddr, *offp); return (ret); } /* * dname_to_bankslot - Get the bank and slot number from the DIMM name. */ int dname_to_bankslot(char *dname, int *bank, int *slot) { int i; int tsz; char **tbl; if (plat_model == MODEL_DC) { /* * All DC models */ tbl = mc_dc_dimm_unum_table; tsz = OPL_MAX_DIMMS; } else { /* * All FF and Ikkaku models */ tbl = mc_ff_dimm_unum_table; tsz = 2 * OPL_MAX_DIMMS; } for (i = 0; i < tsz; i++) { if (strcmp(dname, tbl[i]) == 0) { break; } } if (i == tsz) { return (1); } *bank = INDEX_TO_BANK(i); *slot = INDEX_TO_SLOT(i); return (0); } /* * mc_get_mem_addr -- get the physical address of a DIMM corresponding * to the unum and sid. */ int mc_get_mem_addr(char *unum, char *sid, uint64_t offset, uint64_t *paddr) { int board; int bank; int slot; int i; int ret = ENODEV; char dname[MCOPL_MAX_DIMMNAME + 1]; mc_addr_t maddr; mc_opl_t *mcp; MC_LOG("mc_get_mem_addr: unum=%s sid=%s offset=0x%lx\n", unum, sid, offset); if (parse_unum_memory(unum, &board, dname) != 0) { MC_LOG("mc_get_mem_sid: unum(%s) parsing failed ret=%d\n", unum, ret); return (EINVAL); } if (board < 0) { MC_LOG("mc_get_mem_addr: Invalid board=%d dimm=%s\n", board, dname); return (EINVAL); } mutex_enter(&mcmutex); for (i = 0; i < OPL_MAX_BOARDS; i++) { if ((mcp = mc_instances[i]) == NULL) continue; mutex_enter(&mcp->mc_lock); if (mcp->mc_phys_board_num != board) { mutex_exit(&mcp->mc_lock); continue; } ret = dname_to_bankslot(dname, &bank, &slot); MC_LOG("mc_get_mem_addr: bank=%d slot=%d\n", bank, slot); if (ret != 0) { MC_LOG("mc_get_mem_addr: dname_to_bankslot failed\n"); ret = ENODEV; } else { maddr.ma_bd = mcp->mc_board_num; maddr.ma_bank = bank; maddr.ma_dimm_addr = offset; ret = mcaddr_to_pa(mcp, &maddr, paddr); if (ret != 0) { MC_LOG("mc_get_mem_addr: " "mcaddr_to_pa failed\n"); ret = ENODEV; mutex_exit(&mcp->mc_lock); continue; } mutex_exit(&mcp->mc_lock); break; } mutex_exit(&mcp->mc_lock); } mutex_exit(&mcmutex); MC_LOG("mc_get_mem_addr: Ret=%d, Paddr=0x%lx\n", ret, *paddr); return (ret); } static void mc_free_dimm_list(mc_dimm_info_t *d) { mc_dimm_info_t *next; while (d != NULL) { next = d->md_next; kmem_free(d, sizeof (mc_dimm_info_t)); d = next; } } /* * mc_get_dimm_list -- get the list of dimms with serial-id info * from the SP. */ mc_dimm_info_t * mc_get_dimm_list(mc_opl_t *mcp) { uint32_t bufsz; uint32_t maxbufsz; int ret; int sexp; board_dimm_info_t *bd_dimmp; mc_dimm_info_t *dimm_list = NULL; maxbufsz = bufsz = sizeof (board_dimm_info_t) + ((MCOPL_MAX_DIMMNAME + MCOPL_MAX_SERIAL + MCOPL_MAX_PARTNUM) * OPL_MAX_DIMMS); bd_dimmp = (board_dimm_info_t *)kmem_alloc(bufsz, KM_SLEEP); ret = scf_get_dimminfo(mcp->mc_board_num, (void *)bd_dimmp, &bufsz); MC_LOG("mc_get_dimm_list: scf_service_getinfo returned=%d\n", ret); if (ret == 0) { sexp = sizeof (board_dimm_info_t) + ((bd_dimmp->bd_dnamesz + bd_dimmp->bd_serialsz + bd_dimmp->bd_partnumsz) * bd_dimmp->bd_numdimms); if ((bd_dimmp->bd_version == OPL_DIMM_INFO_VERSION) && (bd_dimmp->bd_dnamesz <= MCOPL_MAX_DIMMNAME) && (bd_dimmp->bd_serialsz <= MCOPL_MAX_SERIAL) && (bd_dimmp->bd_partnumsz <= MCOPL_MAX_PARTNUM) && (sexp <= bufsz)) { #ifdef DEBUG if (oplmc_debug) mc_dump_dimm_info(bd_dimmp); #endif dimm_list = mc_prepare_dimmlist(bd_dimmp); } else { cmn_err(CE_WARN, "DIMM info version mismatch\n"); } } kmem_free(bd_dimmp, maxbufsz); MC_LOG("mc_get_dimm_list: dimmlist=0x%p\n", (void *)dimm_list); return (dimm_list); } /* * mc_prepare_dimmlist - Prepare the dimm list from the information * received from the SP. */ mc_dimm_info_t * mc_prepare_dimmlist(board_dimm_info_t *bd_dimmp) { char *dimm_name; char *serial; char *part; int dimm; int dnamesz = bd_dimmp->bd_dnamesz; int sersz = bd_dimmp->bd_serialsz; int partsz = bd_dimmp->bd_partnumsz; mc_dimm_info_t *dimm_list = NULL; mc_dimm_info_t *d; dimm_name = (char *)(bd_dimmp + 1); for (dimm = 0; dimm < bd_dimmp->bd_numdimms; dimm++) { d = (mc_dimm_info_t *)kmem_alloc(sizeof (mc_dimm_info_t), KM_SLEEP); bcopy(dimm_name, d->md_dimmname, dnamesz); d->md_dimmname[dnamesz] = 0; serial = dimm_name + dnamesz; bcopy(serial, d->md_serial, sersz); d->md_serial[sersz] = 0; part = serial + sersz; bcopy(part, d->md_partnum, partsz); d->md_partnum[partsz] = 0; d->md_next = dimm_list; dimm_list = d; dimm_name = part + partsz; } return (dimm_list); } static int mc_get_mem_fmri(mc_flt_page_t *fpag, char **unum) { if (fpag->fmri_addr == 0 || fpag->fmri_sz > MEM_FMRI_MAX_BUFSIZE) return (EINVAL); *unum = kmem_alloc(fpag->fmri_sz, KM_SLEEP); if (copyin((void *)fpag->fmri_addr, *unum, fpag->fmri_sz) != 0) { kmem_free(*unum, fpag->fmri_sz); return (EFAULT); } return (0); } static int mc_scf_log_event(mc_flt_page_t *flt_pag) { mc_opl_t *mcp; int board, bank, slot; int len, rv = 0; char *unum, *sid; char dname[MCOPL_MAX_DIMMNAME + 1]; size_t sid_sz; uint64_t pa; mc_flt_stat_t flt_stat; if ((sid_sz = cpu_get_name_bufsize()) == 0) return (ENOTSUP); if ((rv = mc_get_mem_fmri(flt_pag, &unum)) != 0) { MC_LOG("mc_scf_log_event: mc_get_mem_fmri failed\n"); return (rv); } sid = kmem_zalloc(sid_sz, KM_SLEEP); if ((rv = mc_get_mem_sid(unum, sid, sid_sz, &len)) != 0) { MC_LOG("mc_scf_log_event: mc_get_mem_sid failed\n"); goto out; } if ((rv = mc_get_mem_addr(unum, sid, (uint64_t)flt_pag->err_add, &pa)) != 0) { MC_LOG("mc_scf_log_event: mc_get_mem_addr failed\n"); goto out; } if (parse_unum_memory(unum, &board, dname) != 0) { MC_LOG("mc_scf_log_event: parse_unum_memory failed\n"); rv = EINVAL; goto out; } if (board < 0) { MC_LOG("mc_scf_log_event: Invalid board=%d dimm=%s\n", board, dname); rv = EINVAL; goto out; } if (dname_to_bankslot(dname, &bank, &slot) != 0) { MC_LOG("mc_scf_log_event: dname_to_bankslot failed\n"); rv = EINVAL; goto out; } mutex_enter(&mcmutex); flt_stat.mf_err_add = flt_pag->err_add; flt_stat.mf_err_log = flt_pag->err_log; flt_stat.mf_flt_paddr = pa; if ((mcp = mc_pa_to_mcp(pa)) == NULL) { mutex_exit(&mcmutex); MC_LOG("mc_scf_log_event: invalid pa\n"); rv = EINVAL; goto out; } MC_LOG("mc_scf_log_event: DIMM%s, /LSB%d/B%d/%x, pa %lx elog %x\n", unum, mcp->mc_board_num, bank, flt_pag->err_add, pa, flt_pag->err_log); mutex_enter(&mcp->mc_lock); if (!pa_is_valid(mcp, pa)) { mutex_exit(&mcp->mc_lock); mutex_exit(&mcmutex); rv = EINVAL; goto out; } rv = 0; mc_queue_scf_log(mcp, &flt_stat, bank); mutex_exit(&mcp->mc_lock); mutex_exit(&mcmutex); out: kmem_free(unum, flt_pag->fmri_sz); kmem_free(sid, sid_sz); return (rv); } #ifdef DEBUG void mc_dump_dimm(char *buf, int dnamesz, int serialsz, int partnumsz) { char dname[MCOPL_MAX_DIMMNAME + 1]; char serial[MCOPL_MAX_SERIAL + 1]; char part[ MCOPL_MAX_PARTNUM + 1]; char *b; b = buf; bcopy(b, dname, dnamesz); dname[dnamesz] = 0; b += dnamesz; bcopy(b, serial, serialsz); serial[serialsz] = 0; b += serialsz; bcopy(b, part, partnumsz); part[partnumsz] = 0; printf("DIMM=%s Serial=%s PartNum=%s\n", dname, serial, part); } void mc_dump_dimm_info(board_dimm_info_t *bd_dimmp) { int dimm; int dnamesz = bd_dimmp->bd_dnamesz; int sersz = bd_dimmp->bd_serialsz; int partsz = bd_dimmp->bd_partnumsz; char *buf; printf("Version=%d Board=%02d DIMMs=%d NameSize=%d " "SerialSize=%d PartnumSize=%d\n", bd_dimmp->bd_version, bd_dimmp->bd_boardnum, bd_dimmp->bd_numdimms, bd_dimmp->bd_dnamesz, bd_dimmp->bd_serialsz, bd_dimmp->bd_partnumsz); printf("======================================================\n"); buf = (char *)(bd_dimmp + 1); for (dimm = 0; dimm < bd_dimmp->bd_numdimms; dimm++) { mc_dump_dimm(buf, dnamesz, sersz, partsz); buf += dnamesz + sersz + partsz; } printf("======================================================\n"); } /* ARGSUSED */ static int mc_ioctl_debug(dev_t dev, int cmd, intptr_t arg, int mode, cred_t *credp, int *rvalp) { caddr_t buf, kbuf; uint64_t pa; int rv = 0; int i; uint32_t flags; static uint32_t offset = 0; flags = (cmd >> 4) & 0xfffffff; cmd &= 0xf; MC_LOG("mc_ioctl(cmd = %x, flags = %x)\n", cmd, flags); if (arg != NULL) { if (ddi_copyin((const void *)arg, (void *)&pa, sizeof (uint64_t), 0) < 0) { rv = EFAULT; return (rv); } buf = NULL; } else { buf = (caddr_t)kmem_alloc(PAGESIZE, KM_SLEEP); pa = va_to_pa(buf); pa += offset; offset += 64; if (offset >= PAGESIZE) offset = 0; } switch (cmd) { case MCI_CE: (void) mc_inject_error(MC_INJECT_INTERMITTENT_CE, pa, flags); break; case MCI_PERM_CE: (void) mc_inject_error(MC_INJECT_PERMANENT_CE, pa, flags); break; case MCI_UE: (void) mc_inject_error(MC_INJECT_UE, pa, flags); break; case MCI_M_CE: (void) mc_inject_error(MC_INJECT_INTERMITTENT_MCE, pa, flags); break; case MCI_M_PCE: (void) mc_inject_error(MC_INJECT_PERMANENT_MCE, pa, flags); break; case MCI_M_UE: (void) mc_inject_error(MC_INJECT_MUE, pa, flags); break; case MCI_CMP: (void) mc_inject_error(MC_INJECT_CMPE, pa, flags); break; case MCI_NOP: (void) mc_inject_error(MC_INJECT_NOP, pa, flags); break; case MCI_SHOW_ALL: mc_debug_show_all = 1; break; case MCI_SHOW_NONE: mc_debug_show_all = 0; break; case MCI_ALLOC: /* * just allocate some kernel memory and never free it * 512 MB seems to be the maximum size supported. */ cmn_err(CE_NOTE, "Allocating kmem %d MB\n", flags * 512); for (i = 0; i < flags; i++) { kbuf = kmem_alloc(512 * 1024 * 1024, KM_SLEEP); cmn_err(CE_NOTE, "kmem buf %llx PA %llx\n", (u_longlong_t)kbuf, (u_longlong_t)va_to_pa(kbuf)); } break; case MCI_SUSPEND: (void) opl_mc_suspend(); break; case MCI_RESUME: (void) opl_mc_resume(); break; default: rv = ENXIO; } if (buf) kmem_free(buf, PAGESIZE); return (rv); } #endif /* DEBUG */