/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2006 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" #if defined(lint) #include #include #else /* lint */ #include "assym.h" #endif /* lint */ #include #include #include #include #include #include #ifdef TRAPTRACE #include #endif /* TRAPTRACE */ #if defined(lint) void vec_interrupt(void) {} #else /* lint */ vec_uiii_irdr_tab: .byte UIII_IRDR_0, UIII_IRDR_1, UIII_IRDR_2, UIII_IRDR_3 .byte UIII_IRDR_4, UIII_IRDR_5, UIII_IRDR_6, UIII_IRDR_7 /* * (TT 0x60, TL>0) Interrupt Vector Handler * Globals are the Interrupt Globals. */ ENTRY_NP(vec_interrupt) ! ! Load the interrupt receive data register 0. ! It could be a fast trap handler address (pc > KERNELBASE) at TL>0 ! or an interrupt number. ! mov IRDR_0, %g2 ldxa [%g2]ASI_INTR_RECEIVE, %g5 ! %g5 = PC or Interrupt Number ! If the high bit of IRDR_0 is set, then this is a ! data bearing mondo vector. brlz,pt %g5, dmv_vector .empty vec_interrupt_resume: set KERNELBASE, %g4 cmp %g5, %g4 bl,a,pt %xcc, 0f ! an interrupt number found nop ! ! intercept OBP xcalls and set PCONTEXT=0 ! set _end, %g4 ! _end is highest kernel address cmp %g5, %g4 bl,a,pt %xcc, 7f nop mov MMU_PCONTEXT, %g1 ldxa [%g1]ASI_DMMU, %g1 srlx %g1, CTXREG_NEXT_SHIFT, %g3 brz,pt %g3, 7f ! nucleus pgsz is 0, no problem sllx %g3, CTXREG_NEXT_SHIFT, %g3 set CTXREG_CTX_MASK, %g4 ! check Pcontext btst %g4, %g1 bz,a,pt %xcc, 6f clr %g3 ! kernel: PCONTEXT=0 xor %g3, %g1, %g3 ! user: clr N_pgsz0/1 bits 6: set DEMAP_ALL_TYPE, %g1 stxa %g0, [%g1]ASI_DTLB_DEMAP stxa %g0, [%g1]ASI_ITLB_DEMAP mov MMU_PCONTEXT, %g1 stxa %g3, [%g1]ASI_DMMU membar #Sync sethi %hi(FLUSH_ADDR), %g1 flush %g1 ! flush required by immu 7: ! ! Cross-trap request case ! ! Load interrupt receive data registers 1 and 2 to fetch ! the arguments for the fast trap handler. ! ! Register usage: ! g5: TL>0 handler ! g1: arg1 ! g2: arg2 ! g3: arg3 ! g4: arg4 ! mov IRDR_1, %g2 ldxa [%g2]ASI_INTR_RECEIVE, %g1 mov IRDR_2, %g2 ldxa [%g2]ASI_INTR_RECEIVE, %g2 #ifdef TRAPTRACE TRACE_PTR(%g4, %g6) GET_TRACE_TICK(%g6) stxa %g6, [%g4 + TRAP_ENT_TICK]%asi rdpr %tl, %g6 stha %g6, [%g4 + TRAP_ENT_TL]%asi rdpr %tt, %g6 stha %g6, [%g4 + TRAP_ENT_TT]%asi rdpr %tpc, %g6 stna %g6, [%g4 + TRAP_ENT_TPC]%asi rdpr %tstate, %g6 stxa %g6, [%g4 + TRAP_ENT_TSTATE]%asi stna %sp, [%g4 + TRAP_ENT_SP]%asi stna %g5, [%g4 + TRAP_ENT_TR]%asi ! pc of the TL>0 handler stxa %g1, [%g4 + TRAP_ENT_F1]%asi stxa %g2, [%g4 + TRAP_ENT_F3]%asi stxa %g0, [%g4 + TRAP_ENT_F2]%asi stxa %g0, [%g4 + TRAP_ENT_F4]%asi TRACE_NEXT(%g4, %g6, %g3) #endif /* TRAPTRACE */ stxa %g0, [%g0]ASI_INTR_RECEIVE_STATUS ! clear the BUSY bit membar #Sync #ifdef SF_ERRATA_51 ba,pt %icc, 1f nop .align 32 1: jmp %g5 ! call the fast trap handler nop #else jmp %g5 nop #endif /* SF_ERRATA_51 */ /* Never Reached */ 0: ! We have an interrupt number. ! ! Register usage: ! %g5 - inum ! %g1 - temp ! ! We don't bother to verify that the received inum is valid (it should ! be < MAXIVNUM) since setvecint_tl1 will do that for us. ! ! clear BUSY bit ! stxa %g0, [%g0]ASI_INTR_RECEIVE_STATUS membar #Sync ! setvecint_tl1 will do all the work, and finish with a retry ! ba,pt %xcc, setvecint_tl1 mov %g5, %g1 ! setvecint_tl1 expects inum in %g1 /* Never Reached */ SET_SIZE(vec_interrupt) ! ! See usr/src/uts/sun4u/sys/dmv.h for the Databearing Mondo Vector ! interrupt format ! ! Inputs: ! g1: value of ASI_INTR_RECEIVE_STATUS ! g5: word 0 of the interrupt data ! Register use: ! g2: dmv inum ! g3: scratch ! g4: pointer to dmv_dispatch_table ! g6: handler pointer from dispatch table DGDEF(dmv_spurious_cnt) .word 0 ENTRY_NP(dmv_vector) srlx %g5, DMV_INUM_SHIFT, %g2 set DMV_INUM_MASK, %g3 and %g2, %g3, %g2 ! %g2 = inum set dmv_totalints, %g3 ld [%g3], %g3 cmp %g2, %g3 bge,pn %xcc, 2f ! inum >= dmv_totalints nop set dmv_dispatch_table, %g3 ldn [%g3], %g4 brz,pn %g4, 2f sll %g2, DMV_DISP_SHIFT, %g3 ! %g3 = inum*sizeof(struct dmv_disp) add %g4, %g3, %g4 ! %g4 = &dmv_dispatch_table[inum] #if (DMV_FUNC != 0) || (DMV_ARG != 8) #error "DMV_FUNC or DMV_SIZE has changed" #endif ldda [%g4]ASI_NQUAD_LD, %g2 ! %g2=handler %g3=argument mov %g3, %g1 brz,pn %g2, 2f nop ! we have a handler, so call it ! On entry to the handler, the %g registers are set as follows: ! ! %g1 The argument (arg) passed to dmv_add_intr(). ! %g2 Word 0 of the incoming mondo vector. ! jmp %g2 mov %g5, %g2 ! No handler was listed in the table, so just record it ! as an error condition and continue. There is a race ! window here updating the counter, but that's ok since ! just knowing that spurious interrupts happened is enough, ! we probably won't need to know exactly how many. 2: set dmv_spurious_cnt, %g1 ld [%g1], %g2 inc %g2 ba,pt %xcc,3f st %g2, [%g1] ! When the handler's processing (which should be as quick as ! possible) is complete, the handler must exit by jumping to ! the label dmv_finish_intr. The contents of %g1 at this time ! determine whether a software interrupt will be issued, as ! follows: ! ! If %g1 is less than zero, no interrupt will be queued. ! Otherwise, %g1 will be used as the interrupt number ! to simulate; this means that the behavior of the ! interrupt system will be exactly that which would have ! occurred if the first word of the incoming interrupt ! vector had contained the contents of %g1. ENTRY_NP(dmv_finish_intr) brlz,pn %g1,3f nop ! generate an interrupt based on the contents of %g1 ba,pt %xcc,vec_interrupt_resume mov %g1, %g5 ! We are done 3: stxa %g0, [%g0]ASI_INTR_RECEIVE_STATUS ! clear the busy bit retry SET_SIZE(dmv_vector) #endif /* lint */ #if defined(lint) void vec_intr_spurious(void) {} #else /* lint */ DGDEF(vec_spurious_cnt) .word 0 ENTRY_NP(vec_intr_spurious) sethi %hi(vec_spurious_cnt), %g2 ld [%g2 + %lo(vec_spurious_cnt)], %g2 #ifdef TRAPTRACE TRACE_PTR(%g4, %g6) GET_TRACE_TICK(%g6) stxa %g6, [%g4 + TRAP_ENT_TICK]%asi rdpr %tl, %g6 stha %g6, [%g4 + TRAP_ENT_TL]%asi rdpr %tt, %g6 or %g6, TT_SPURIOUS_INT, %g6 stha %g6, [%g4 + TRAP_ENT_TT]%asi rdpr %tpc, %g6 stna %g6, [%g4 + TRAP_ENT_TPC]%asi rdpr %tstate, %g6 stxa %g6, [%g4 + TRAP_ENT_TSTATE]%asi stna %sp, [%g4 + TRAP_ENT_SP]%asi stna %g1, [%g4 + TRAP_ENT_TR]%asi ! irsr stna %g2, [%g4 + TRAP_ENT_F1]%asi ldxa [%g0]ASI_INTR_RECEIVE_STATUS, %g5 stxa %g5, [%g4 + TRAP_ENT_F2]%asi stxa %g0, [%g4 + TRAP_ENT_F4]%asi TRACE_NEXT(%g4, %g6, %g3) #endif /* TRAPTRACE */ cmp %g2, 16 bl,a,pt %xcc, 1f inc %g2 ! ! prepare for sys_trap() ! %g1 - sys_tl1_panic ! %g2 - panic message ! %g4 - current pil ! #ifdef CLEAR_INTR_BUSYBIT_ON_SPURIOUS /* * Certain processors (OPL) need to explicitly * clear the intr busy bit even though it is * not visibly set (spurious intrs) */ stxa %g0, [%g0]ASI_INTR_RECEIVE_STATUS ! clear the BUSY bit membar #Sync #endif /* CLEAR_INTR_BUSYBIT_ON_SPURIOUS */ sub %g0, 1, %g4 set _not_ready, %g2 sethi %hi(sys_tl1_panic), %g1 ba,pt %xcc, sys_trap or %g1, %lo(sys_tl1_panic), %g1 ! 1: sethi %hi(vec_spurious_cnt), %g1 st %g2, [%g1 + %lo(vec_spurious_cnt)] retry SET_SIZE(vec_intr_spurious) _not_ready: .asciz "Interrupt Vector Receive Register not READY" #endif /* lint */