/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2008 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. * * Assembly code support for Cheetah/Cheetah+ modules */ #if !defined(lint) #include "assym.h" #endif /* !lint */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef TRAPTRACE #include #endif /* TRAPTRACE */ #if !defined(lint) /* BEGIN CSTYLED */ #define DCACHE_FLUSHPAGE(arg1, arg2, tmp1, tmp2, tmp3) \ ldxa [%g0]ASI_DCU, tmp1 ;\ btst DCU_DC, tmp1 /* is dcache enabled? */ ;\ bz,pn %icc, 1f ;\ ASM_LD(tmp1, dcache_linesize) ;\ ASM_LD(tmp2, dflush_type) ;\ cmp tmp2, FLUSHPAGE_TYPE ;\ be,pt %icc, 2f ;\ nop ;\ sllx arg1, CHEETAH_DC_VBIT_SHIFT, arg1/* tag to compare */ ;\ ASM_LD(tmp3, dcache_size) ;\ cmp tmp2, FLUSHMATCH_TYPE ;\ be,pt %icc, 3f ;\ nop ;\ /* \ * flushtype = FLUSHALL_TYPE, flush the whole thing \ * tmp3 = cache size \ * tmp1 = cache line size \ */ \ sub tmp3, tmp1, tmp2 ;\ 4: \ stxa %g0, [tmp2]ASI_DC_TAG ;\ membar #Sync ;\ cmp %g0, tmp2 ;\ bne,pt %icc, 4b ;\ sub tmp2, tmp1, tmp2 ;\ ba,pt %icc, 1f ;\ nop ;\ /* \ * flushtype = FLUSHPAGE_TYPE \ * arg1 = pfn \ * arg2 = virtual color \ * tmp1 = cache line size \ * tmp2 = tag from cache \ * tmp3 = counter \ */ \ 2: \ set MMU_PAGESIZE, tmp3 ;\ sllx arg1, MMU_PAGESHIFT, arg1 /* pfn to 43 bit PA */ ;\ sub tmp3, tmp1, tmp3 ;\ 4: \ stxa %g0, [arg1 + tmp3]ASI_DC_INVAL ;\ membar #Sync ;\ 5: \ cmp %g0, tmp3 ;\ bnz,pt %icc, 4b /* branch if not done */ ;\ sub tmp3, tmp1, tmp3 ;\ ba,pt %icc, 1f ;\ nop ;\ /* \ * flushtype = FLUSHMATCH_TYPE \ * arg1 = tag to compare against \ * tmp1 = cache line size \ * tmp3 = cache size \ * arg2 = counter \ * tmp2 = cache tag \ */ \ 3: \ sub tmp3, tmp1, arg2 ;\ 4: \ ldxa [arg2]ASI_DC_TAG, tmp2 /* read tag */ ;\ btst CHEETAH_DC_VBIT_MASK, tmp2 ;\ bz,pn %icc, 5f /* br if no valid sub-blocks */ ;\ andn tmp2, CHEETAH_DC_VBIT_MASK, tmp2 /* clear out v bits */ ;\ cmp tmp2, arg1 ;\ bne,pn %icc, 5f /* branch if tag miss */ ;\ nop ;\ stxa %g0, [arg2]ASI_DC_TAG ;\ membar #Sync ;\ 5: \ cmp %g0, arg2 ;\ bne,pt %icc, 4b /* branch if not done */ ;\ sub arg2, tmp1, arg2 ;\ 1: /* * macro that flushes the entire dcache color * dcache size = 64K, one way 16K */ #define DCACHE_FLUSHCOLOR(arg, way, tmp1, tmp2, tmp3) \ ldxa [%g0]ASI_DCU, tmp1; \ btst DCU_DC, tmp1; /* is dcache enabled? */ \ bz,pn %icc, 1f; \ ASM_LD(tmp1, dcache_linesize) \ set MMU_PAGESIZE, tmp2; \ /* \ * arg = virtual color \ * tmp2 = page size \ * tmp1 = cache line size \ */ \ sllx arg, MMU_PAGESHIFT, arg; /* color to dcache page */ \ mov way, tmp3; \ sllx tmp3, 14, tmp3; /* One way 16K */ \ or arg, tmp3, arg; \ sub tmp2, tmp1, tmp2; \ 2: \ stxa %g0, [arg + tmp2]ASI_DC_TAG; \ membar #Sync; \ cmp %g0, tmp2; \ bne,pt %icc, 2b; \ sub tmp2, tmp1, tmp2; \ 1: /* END CSTYLED */ #endif /* !lint */ /* * Cheetah MMU and Cache operations. */ #if defined(lint) /* ARGSUSED */ void vtag_flushpage(caddr_t vaddr, uint64_t sfmmup) {} #else /* lint */ ENTRY_NP(vtag_flushpage) /* * flush page from the tlb * * %o0 = vaddr * %o1 = sfmmup */ rdpr %pstate, %o5 #ifdef DEBUG PANIC_IF_INTR_DISABLED_PSTR(%o5, u3_di_label0, %g1) #endif /* DEBUG */ /* * disable ints */ andn %o5, PSTATE_IE, %o4 wrpr %o4, 0, %pstate /* * Then, blow out the tlb * Interrupts are disabled to prevent the primary ctx register * from changing underneath us. */ sethi %hi(ksfmmup), %o3 ldx [%o3 + %lo(ksfmmup)], %o3 cmp %o3, %o1 bne,pt %xcc, 1f ! if not kernel as, go to 1 sethi %hi(FLUSH_ADDR), %o3 /* * For Kernel demaps use primary. type = page implicitly */ stxa %g0, [%o0]ASI_DTLB_DEMAP /* dmmu flush for KCONTEXT */ stxa %g0, [%o0]ASI_ITLB_DEMAP /* immu flush for KCONTEXT */ flush %o3 retl wrpr %g0, %o5, %pstate /* enable interrupts */ 1: /* * User demap. We need to set the primary context properly. * Secondary context cannot be used for Cheetah IMMU. * %o0 = vaddr * %o1 = sfmmup * %o3 = FLUSH_ADDR */ SFMMU_CPU_CNUM(%o1, %g1, %g2) ! %g1 = sfmmu cnum on this CPU ldub [%o1 + SFMMU_CEXT], %o4 ! %o4 = sfmmup->sfmmu_cext sll %o4, CTXREG_EXT_SHIFT, %o4 or %g1, %o4, %g1 ! %g1 = primary pgsz | cnum wrpr %g0, 1, %tl set MMU_PCONTEXT, %o4 or DEMAP_PRIMARY | DEMAP_PAGE_TYPE, %o0, %o0 ldxa [%o4]ASI_DMMU, %o2 ! %o2 = save old ctxnum srlx %o2, CTXREG_NEXT_SHIFT, %o1 ! need to preserve nucleus pgsz sllx %o1, CTXREG_NEXT_SHIFT, %o1 ! %o1 = nucleus pgsz or %g1, %o1, %g1 ! %g1 = nucleus pgsz | primary pgsz | cnum stxa %g1, [%o4]ASI_DMMU ! wr new ctxum stxa %g0, [%o0]ASI_DTLB_DEMAP stxa %g0, [%o0]ASI_ITLB_DEMAP stxa %o2, [%o4]ASI_DMMU /* restore old ctxnum */ flush %o3 wrpr %g0, 0, %tl retl wrpr %g0, %o5, %pstate /* enable interrupts */ SET_SIZE(vtag_flushpage) #endif /* lint */ #if defined(lint) void vtag_flushall(void) {} #else /* lint */ ENTRY_NP2(vtag_flushall, demap_all) /* * flush the tlb */ sethi %hi(FLUSH_ADDR), %o3 set DEMAP_ALL_TYPE, %g1 stxa %g0, [%g1]ASI_DTLB_DEMAP stxa %g0, [%g1]ASI_ITLB_DEMAP flush %o3 retl nop SET_SIZE(demap_all) SET_SIZE(vtag_flushall) #endif /* lint */ #if defined(lint) /* ARGSUSED */ void vtag_flushpage_tl1(uint64_t vaddr, uint64_t sfmmup) {} #else /* lint */ ENTRY_NP(vtag_flushpage_tl1) /* * x-trap to flush page from tlb and tsb * * %g1 = vaddr, zero-extended on 32-bit kernel * %g2 = sfmmup * * assumes TSBE_TAG = 0 */ srln %g1, MMU_PAGESHIFT, %g1 sethi %hi(ksfmmup), %g3 ldx [%g3 + %lo(ksfmmup)], %g3 cmp %g3, %g2 bne,pt %xcc, 1f ! if not kernel as, go to 1 slln %g1, MMU_PAGESHIFT, %g1 /* g1 = vaddr */ /* We need to demap in the kernel context */ or DEMAP_NUCLEUS | DEMAP_PAGE_TYPE, %g1, %g1 stxa %g0, [%g1]ASI_DTLB_DEMAP stxa %g0, [%g1]ASI_ITLB_DEMAP retry 1: /* We need to demap in a user context */ or DEMAP_PRIMARY | DEMAP_PAGE_TYPE, %g1, %g1 SFMMU_CPU_CNUM(%g2, %g6, %g3) ! %g6 = sfmmu cnum on this CPU ldub [%g2 + SFMMU_CEXT], %g4 ! %g4 = sfmmup->cext sll %g4, CTXREG_EXT_SHIFT, %g4 or %g6, %g4, %g6 ! %g6 = pgsz | cnum set MMU_PCONTEXT, %g4 ldxa [%g4]ASI_DMMU, %g5 /* rd old ctxnum */ srlx %g5, CTXREG_NEXT_SHIFT, %g2 /* %g2 = nucleus pgsz */ sllx %g2, CTXREG_NEXT_SHIFT, %g2 /* preserve nucleus pgsz */ or %g6, %g2, %g6 /* %g6 = nucleus pgsz | primary pgsz | cnum */ stxa %g6, [%g4]ASI_DMMU /* wr new ctxum */ stxa %g0, [%g1]ASI_DTLB_DEMAP stxa %g0, [%g1]ASI_ITLB_DEMAP stxa %g5, [%g4]ASI_DMMU /* restore old ctxnum */ retry SET_SIZE(vtag_flushpage_tl1) #endif /* lint */ #if defined(lint) /* ARGSUSED */ void vtag_flush_pgcnt_tl1(uint64_t vaddr, uint64_t sfmmup_pgcnt) {} #else /* lint */ ENTRY_NP(vtag_flush_pgcnt_tl1) /* * x-trap to flush pgcnt MMU_PAGESIZE pages from tlb * * %g1 = vaddr, zero-extended on 32-bit kernel * %g2 = , (pgcnt - 1) is pass'ed in via pgcnt6 bits. * * NOTE: this handler relies on the fact that no * interrupts or traps can occur during the loop * issuing the TLB_DEMAP operations. It is assumed * that interrupts are disabled and this code is * fetching from the kernel locked text address. * * assumes TSBE_TAG = 0 */ set SFMMU_PGCNT_MASK, %g4 and %g4, %g2, %g3 /* g3 = pgcnt - 1 */ add %g3, 1, %g3 /* g3 = pgcnt */ andn %g2, SFMMU_PGCNT_MASK, %g2 /* g2 = sfmmup */ srln %g1, MMU_PAGESHIFT, %g1 sethi %hi(ksfmmup), %g4 ldx [%g4 + %lo(ksfmmup)], %g4 cmp %g4, %g2 bne,pn %xcc, 1f /* if not kernel as, go to 1 */ slln %g1, MMU_PAGESHIFT, %g1 /* g1 = vaddr */ /* We need to demap in the kernel context */ or DEMAP_NUCLEUS | DEMAP_PAGE_TYPE, %g1, %g1 set MMU_PAGESIZE, %g2 /* g2 = pgsize */ sethi %hi(FLUSH_ADDR), %g5 4: stxa %g0, [%g1]ASI_DTLB_DEMAP stxa %g0, [%g1]ASI_ITLB_DEMAP flush %g5 ! flush required by immu deccc %g3 /* decr pgcnt */ bnz,pt %icc,4b add %g1, %g2, %g1 /* next page */ retry 1: /* * We need to demap in a user context * * g2 = sfmmup * g3 = pgcnt */ SFMMU_CPU_CNUM(%g2, %g5, %g6) ! %g5 = sfmmu cnum on this CPU or DEMAP_PRIMARY | DEMAP_PAGE_TYPE, %g1, %g1 ldub [%g2 + SFMMU_CEXT], %g4 ! %g4 = sfmmup->cext sll %g4, CTXREG_EXT_SHIFT, %g4 or %g5, %g4, %g5 set MMU_PCONTEXT, %g4 ldxa [%g4]ASI_DMMU, %g6 /* rd old ctxnum */ srlx %g6, CTXREG_NEXT_SHIFT, %g2 /* %g2 = nucleus pgsz */ sllx %g2, CTXREG_NEXT_SHIFT, %g2 /* preserve nucleus pgsz */ or %g5, %g2, %g5 /* %g5 = nucleus pgsz | primary pgsz | cnum */ stxa %g5, [%g4]ASI_DMMU /* wr new ctxum */ set MMU_PAGESIZE, %g2 /* g2 = pgsize */ sethi %hi(FLUSH_ADDR), %g5 3: stxa %g0, [%g1]ASI_DTLB_DEMAP stxa %g0, [%g1]ASI_ITLB_DEMAP flush %g5 ! flush required by immu deccc %g3 /* decr pgcnt */ bnz,pt %icc,3b add %g1, %g2, %g1 /* next page */ stxa %g6, [%g4]ASI_DMMU /* restore old ctxnum */ retry SET_SIZE(vtag_flush_pgcnt_tl1) #endif /* lint */ #if defined(lint) /*ARGSUSED*/ void vtag_flushall_tl1(uint64_t dummy1, uint64_t dummy2) {} #else /* lint */ ENTRY_NP(vtag_flushall_tl1) /* * x-trap to flush tlb */ set DEMAP_ALL_TYPE, %g4 stxa %g0, [%g4]ASI_DTLB_DEMAP stxa %g0, [%g4]ASI_ITLB_DEMAP retry SET_SIZE(vtag_flushall_tl1) #endif /* lint */ #if defined(lint) /* ARGSUSED */ void vac_flushpage(pfn_t pfnum, int vcolor) {} #else /* lint */ /* * vac_flushpage(pfnum, color) * Flush 1 8k page of the D-$ with physical page = pfnum * Algorithm: * The cheetah dcache is a 64k psuedo 4 way accaociative cache. * It is virtual indexed, physically tagged cache. */ .seg ".data" .align 8 .global dflush_type dflush_type: .word FLUSHPAGE_TYPE ENTRY(vac_flushpage) /* * flush page from the d$ * * %o0 = pfnum, %o1 = color */ DCACHE_FLUSHPAGE(%o0, %o1, %o2, %o3, %o4) retl nop SET_SIZE(vac_flushpage) #endif /* lint */ #if defined(lint) /* ARGSUSED */ void vac_flushpage_tl1(uint64_t pfnum, uint64_t vcolor) {} #else /* lint */ ENTRY_NP(vac_flushpage_tl1) /* * x-trap to flush page from the d$ * * %g1 = pfnum, %g2 = color */ DCACHE_FLUSHPAGE(%g1, %g2, %g3, %g4, %g5) retry SET_SIZE(vac_flushpage_tl1) #endif /* lint */ #if defined(lint) /* ARGSUSED */ void vac_flushcolor(int vcolor, pfn_t pfnum) {} #else /* lint */ ENTRY(vac_flushcolor) /* * %o0 = vcolor */ DCACHE_FLUSHCOLOR(%o0, 0, %o1, %o2, %o3) DCACHE_FLUSHCOLOR(%o0, 1, %o1, %o2, %o3) DCACHE_FLUSHCOLOR(%o0, 2, %o1, %o2, %o3) DCACHE_FLUSHCOLOR(%o0, 3, %o1, %o2, %o3) retl nop SET_SIZE(vac_flushcolor) #endif /* lint */ #if defined(lint) /* ARGSUSED */ void vac_flushcolor_tl1(uint64_t vcolor, uint64_t pfnum) {} #else /* lint */ ENTRY(vac_flushcolor_tl1) /* * %g1 = vcolor */ DCACHE_FLUSHCOLOR(%g1, 0, %g2, %g3, %g4) DCACHE_FLUSHCOLOR(%g1, 1, %g2, %g3, %g4) DCACHE_FLUSHCOLOR(%g1, 2, %g2, %g3, %g4) DCACHE_FLUSHCOLOR(%g1, 3, %g2, %g3, %g4) retry SET_SIZE(vac_flushcolor_tl1) #endif /* lint */ #if defined(lint) int idsr_busy(void) { return (0); } #else /* lint */ /* * Determine whether or not the IDSR is busy. * Entry: no arguments * Returns: 1 if busy, 0 otherwise */ ENTRY(idsr_busy) ldxa [%g0]ASI_INTR_DISPATCH_STATUS, %g1 clr %o0 btst IDSR_BUSY, %g1 bz,a,pt %xcc, 1f mov 1, %o0 1: retl nop SET_SIZE(idsr_busy) #endif /* lint */ #if defined(lint) /* ARGSUSED */ void init_mondo(xcfunc_t *func, uint64_t arg1, uint64_t arg2) {} /* ARGSUSED */ void init_mondo_nocheck(xcfunc_t *func, uint64_t arg1, uint64_t arg2) {} #else /* lint */ .global _dispatch_status_busy _dispatch_status_busy: .asciz "ASI_INTR_DISPATCH_STATUS error: busy" .align 4 /* * Setup interrupt dispatch data registers * Entry: * %o0 - function or inumber to call * %o1, %o2 - arguments (2 uint64_t's) */ .seg "text" ENTRY(init_mondo) #ifdef DEBUG ! ! IDSR should not be busy at the moment ! ldxa [%g0]ASI_INTR_DISPATCH_STATUS, %g1 btst IDSR_BUSY, %g1 bz,pt %xcc, 1f nop sethi %hi(_dispatch_status_busy), %o0 call panic or %o0, %lo(_dispatch_status_busy), %o0 #endif /* DEBUG */ ALTENTRY(init_mondo_nocheck) ! ! interrupt vector dispatch data reg 0 ! 1: mov IDDR_0, %g1 mov IDDR_1, %g2 mov IDDR_2, %g3 stxa %o0, [%g1]ASI_INTR_DISPATCH ! ! interrupt vector dispatch data reg 1 ! stxa %o1, [%g2]ASI_INTR_DISPATCH ! ! interrupt vector dispatch data reg 2 ! stxa %o2, [%g3]ASI_INTR_DISPATCH membar #Sync retl nop SET_SIZE(init_mondo_nocheck) SET_SIZE(init_mondo) #endif /* lint */ #if !(defined(JALAPENO) || defined(SERRANO)) #if defined(lint) /* ARGSUSED */ void shipit(int upaid, int bn) { return; } #else /* lint */ /* * Ship mondo to aid using busy/nack pair bn */ ENTRY_NP(shipit) sll %o0, IDCR_PID_SHIFT, %g1 ! IDCR<18:14> = agent id sll %o1, IDCR_BN_SHIFT, %g2 ! IDCR<28:24> = b/n pair or %g1, IDCR_OFFSET, %g1 ! IDCR<13:0> = 0x70 or %g1, %g2, %g1 stxa %g0, [%g1]ASI_INTR_DISPATCH ! interrupt vector dispatch membar #Sync retl nop SET_SIZE(shipit) #endif /* lint */ #endif /* !(JALAPENO || SERRANO) */ #if defined(lint) /* ARGSUSED */ void flush_instr_mem(caddr_t vaddr, size_t len) {} #else /* lint */ /* * flush_instr_mem: * Flush 1 page of the I-$ starting at vaddr * %o0 vaddr * %o1 bytes to be flushed * UltraSPARC-III maintains consistency of the on-chip Instruction Cache with * the stores from all processors so that a FLUSH instruction is only needed * to ensure pipeline is consistent. This means a single flush is sufficient at * the end of a sequence of stores that updates the instruction stream to * ensure correct operation. */ ENTRY(flush_instr_mem) flush %o0 ! address irrelevant retl nop SET_SIZE(flush_instr_mem) #endif /* lint */ #if defined(CPU_IMP_ECACHE_ASSOC) #if defined(lint) /* ARGSUSED */ uint64_t get_ecache_ctrl(void) { return (0); } #else /* lint */ ENTRY(get_ecache_ctrl) GET_CPU_IMPL(%o0) cmp %o0, JAGUAR_IMPL ! ! Putting an ASI access in the delay slot may ! cause it to be accessed, even when annulled. ! bne 1f nop ldxa [%g0]ASI_EC_CFG_TIMING, %o0 ! read Jaguar shared E$ ctrl reg b 2f nop 1: ldxa [%g0]ASI_EC_CTRL, %o0 ! read Ch/Ch+ E$ control reg 2: retl nop SET_SIZE(get_ecache_ctrl) #endif /* lint */ #endif /* CPU_IMP_ECACHE_ASSOC */ #if !(defined(JALAPENO) || defined(SERRANO)) /* * flush_ecache: * %o0 - 64 bit physical address * %o1 - ecache size * %o2 - ecache linesize */ #if defined(lint) /*ARGSUSED*/ void flush_ecache(uint64_t physaddr, size_t ecache_size, size_t ecache_linesize) {} #else /* !lint */ ENTRY(flush_ecache) /* * For certain CPU implementations, we have to flush the L2 cache * before flushing the ecache. */ PN_L2_FLUSHALL(%g3, %g4, %g5) /* * Flush the entire Ecache using displacement flush. */ ECACHE_FLUSHALL(%o1, %o2, %o0, %o4) retl nop SET_SIZE(flush_ecache) #endif /* lint */ #endif /* !(JALAPENO || SERRANO) */ #if defined(lint) void flush_dcache(void) {} #else /* lint */ ENTRY(flush_dcache) ASM_LD(%o0, dcache_size) ASM_LD(%o1, dcache_linesize) CH_DCACHE_FLUSHALL(%o0, %o1, %o2) retl nop SET_SIZE(flush_dcache) #endif /* lint */ #if defined(lint) void flush_icache(void) {} #else /* lint */ ENTRY(flush_icache) GET_CPU_PRIVATE_PTR(%g0, %o0, %o2, flush_icache_1); ld [%o0 + CHPR_ICACHE_LINESIZE], %o1 ba,pt %icc, 2f ld [%o0 + CHPR_ICACHE_SIZE], %o0 flush_icache_1: ASM_LD(%o0, icache_size) ASM_LD(%o1, icache_linesize) 2: CH_ICACHE_FLUSHALL(%o0, %o1, %o2, %o4) retl nop SET_SIZE(flush_icache) #endif /* lint */ #if defined(lint) /*ARGSUSED*/ void kdi_flush_idcache(int dcache_size, int dcache_lsize, int icache_size, int icache_lsize) { } #else /* lint */ ENTRY(kdi_flush_idcache) CH_DCACHE_FLUSHALL(%o0, %o1, %g1) CH_ICACHE_FLUSHALL(%o2, %o3, %g1, %g2) membar #Sync retl nop SET_SIZE(kdi_flush_idcache) #endif /* lint */ #if defined(lint) void flush_pcache(void) {} #else /* lint */ ENTRY(flush_pcache) PCACHE_FLUSHALL(%o0, %o1, %o2) retl nop SET_SIZE(flush_pcache) #endif /* lint */ #if defined(CPU_IMP_L1_CACHE_PARITY) #if defined(lint) /* ARGSUSED */ void get_dcache_dtag(uint32_t dcache_idx, uint64_t *data) {} #else /* lint */ /* * Get dcache data and tag. The Dcache data is a pointer to a ch_dc_data_t * structure (see cheetahregs.h): * The Dcache *should* be turned off when this code is executed. */ .align 128 ENTRY(get_dcache_dtag) rdpr %pstate, %o5 andn %o5, PSTATE_IE | PSTATE_AM, %o3 wrpr %g0, %o3, %pstate b 1f stx %o0, [%o1 + CH_DC_IDX] .align 128 1: ldxa [%o0]ASI_DC_TAG, %o2 stx %o2, [%o1 + CH_DC_TAG] membar #Sync ldxa [%o0]ASI_DC_UTAG, %o2 membar #Sync stx %o2, [%o1 + CH_DC_UTAG] ldxa [%o0]ASI_DC_SNP_TAG, %o2 stx %o2, [%o1 + CH_DC_SNTAG] add %o1, CH_DC_DATA, %o1 clr %o3 2: membar #Sync ! required before ASI_DC_DATA ldxa [%o0 + %o3]ASI_DC_DATA, %o2 membar #Sync ! required after ASI_DC_DATA stx %o2, [%o1 + %o3] cmp %o3, CH_DC_DATA_REG_SIZE - 8 blt 2b add %o3, 8, %o3 /* * Unlike other CPUs in the family, D$ data parity bits for Panther * do not reside in the microtag. Instead, we have to read them * using the DC_data_parity bit of ASI_DCACHE_DATA. Also, instead * of just having 8 parity bits to protect all 32 bytes of data * per line, we now have 32 bits of parity. */ GET_CPU_IMPL(%o3) cmp %o3, PANTHER_IMPL bne 4f clr %o3 /* * move our pointer to the next field where we store parity bits * and add the offset of the last parity byte since we will be * storing all 4 parity bytes within one 64 bit field like this: * * +------+------------+------------+------------+------------+ * | - | DC_parity | DC_parity | DC_parity | DC_parity | * | - | for word 3 | for word 2 | for word 1 | for word 0 | * +------+------------+------------+------------+------------+ * 63:32 31:24 23:16 15:8 7:0 */ add %o1, CH_DC_PN_DATA_PARITY - CH_DC_DATA + 7, %o1 /* add the DC_data_parity bit into our working index */ mov 1, %o2 sll %o2, PN_DC_DATA_PARITY_BIT_SHIFT, %o2 or %o0, %o2, %o0 3: membar #Sync ! required before ASI_DC_DATA ldxa [%o0 + %o3]ASI_DC_DATA, %o2 membar #Sync ! required after ASI_DC_DATA stb %o2, [%o1] dec %o1 cmp %o3, CH_DC_DATA_REG_SIZE - 8 blt 3b add %o3, 8, %o3 4: retl wrpr %g0, %o5, %pstate SET_SIZE(get_dcache_dtag) #endif /* lint */ #if defined(lint) /* ARGSUSED */ void get_icache_dtag(uint32_t ecache_idx, uint64_t *data) {} #else /* lint */ /* * Get icache data and tag. The data argument is a pointer to a ch_ic_data_t * structure (see cheetahregs.h): * The Icache *Must* be turned off when this function is called. * This is because diagnostic accesses to the Icache interfere with cache * consistency. */ .align 128 ENTRY(get_icache_dtag) rdpr %pstate, %o5 andn %o5, PSTATE_IE | PSTATE_AM, %o3 wrpr %g0, %o3, %pstate stx %o0, [%o1 + CH_IC_IDX] ldxa [%o0]ASI_IC_TAG, %o2 stx %o2, [%o1 + CH_IC_PATAG] add %o0, CH_ICTAG_UTAG, %o0 ldxa [%o0]ASI_IC_TAG, %o2 add %o0, (CH_ICTAG_UPPER - CH_ICTAG_UTAG), %o0 stx %o2, [%o1 + CH_IC_UTAG] ldxa [%o0]ASI_IC_TAG, %o2 add %o0, (CH_ICTAG_LOWER - CH_ICTAG_UPPER), %o0 stx %o2, [%o1 + CH_IC_UPPER] ldxa [%o0]ASI_IC_TAG, %o2 andn %o0, CH_ICTAG_TMASK, %o0 stx %o2, [%o1 + CH_IC_LOWER] ldxa [%o0]ASI_IC_SNP_TAG, %o2 stx %o2, [%o1 + CH_IC_SNTAG] add %o1, CH_IC_DATA, %o1 clr %o3 2: ldxa [%o0 + %o3]ASI_IC_DATA, %o2 stx %o2, [%o1 + %o3] cmp %o3, PN_IC_DATA_REG_SIZE - 8 blt 2b add %o3, 8, %o3 retl wrpr %g0, %o5, %pstate SET_SIZE(get_icache_dtag) #endif /* lint */ #if defined(lint) /* ARGSUSED */ void get_pcache_dtag(uint32_t pcache_idx, uint64_t *data) {} #else /* lint */ /* * Get pcache data and tags. * inputs: * pcache_idx - fully constructed VA for for accessing P$ diagnostic * registers. Contains PC_way and PC_addr shifted into * the correct bit positions. See the PRM for more details. * data - pointer to a ch_pc_data_t * structure (see cheetahregs.h): */ .align 128 ENTRY(get_pcache_dtag) rdpr %pstate, %o5 andn %o5, PSTATE_IE | PSTATE_AM, %o3 wrpr %g0, %o3, %pstate stx %o0, [%o1 + CH_PC_IDX] ldxa [%o0]ASI_PC_STATUS_DATA, %o2 stx %o2, [%o1 + CH_PC_STATUS] ldxa [%o0]ASI_PC_TAG, %o2 stx %o2, [%o1 + CH_PC_TAG] ldxa [%o0]ASI_PC_SNP_TAG, %o2 stx %o2, [%o1 + CH_PC_SNTAG] add %o1, CH_PC_DATA, %o1 clr %o3 2: ldxa [%o0 + %o3]ASI_PC_DATA, %o2 stx %o2, [%o1 + %o3] cmp %o3, CH_PC_DATA_REG_SIZE - 8 blt 2b add %o3, 8, %o3 retl wrpr %g0, %o5, %pstate SET_SIZE(get_pcache_dtag) #endif /* lint */ #endif /* CPU_IMP_L1_CACHE_PARITY */ #if defined(lint) /* ARGSUSED */ void set_dcu(uint64_t dcu) {} #else /* lint */ /* * re-enable the i$, d$, w$, and p$ according to bootup cache state. * Turn on WE, HPE, SPE, PE, IC, and DC bits defined as DCU_CACHE. * %o0 - 64 bit constant */ ENTRY(set_dcu) stxa %o0, [%g0]ASI_DCU ! Store to DCU flush %g0 /* flush required after changing the IC bit */ retl nop SET_SIZE(set_dcu) #endif /* lint */ #if defined(lint) uint64_t get_dcu(void) { return ((uint64_t)0); } #else /* lint */ /* * Return DCU register. */ ENTRY(get_dcu) ldxa [%g0]ASI_DCU, %o0 /* DCU control register */ retl nop SET_SIZE(get_dcu) #endif /* lint */ /* * Cheetah/Cheetah+ level 15 interrupt handler trap table entry. * * This handler is used to check for softints generated by error trap * handlers to report errors. On Cheetah, this mechanism is used by the * Fast ECC at TL>0 error trap handler and, on Cheetah+, by both the Fast * ECC at TL>0 error and the I$/D$ parity error at TL>0 trap handlers. * NB: Must be 8 instructions or less to fit in trap table and code must * be relocatable. */ #if defined(lint) void ch_pil15_interrupt_instr(void) {} #else /* lint */ ENTRY_NP(ch_pil15_interrupt_instr) ASM_JMP(%g1, ch_pil15_interrupt) SET_SIZE(ch_pil15_interrupt_instr) #endif #if defined(lint) void ch_pil15_interrupt(void) {} #else /* lint */ ENTRY_NP(ch_pil15_interrupt) /* * Since pil_interrupt is hacked to assume that every level 15 * interrupt is generated by the CPU to indicate a performance * counter overflow this gets ugly. Before calling pil_interrupt * the Error at TL>0 pending status is inspected. If it is * non-zero, then an error has occurred and it is handled. * Otherwise control is transfered to pil_interrupt. Note that if * an error is detected pil_interrupt will not be called and * overflow interrupts may be lost causing erroneous performance * measurements. However, error-recovery will have a detrimental * effect on performance anyway. */ CPU_INDEX(%g1, %g4) set ch_err_tl1_pending, %g4 ldub [%g1 + %g4], %g2 brz %g2, 1f nop /* * We have a pending TL>0 error, clear the TL>0 pending status. */ stb %g0, [%g1 + %g4] /* * Clear the softint. */ mov 1, %g5 sll %g5, PIL_15, %g5 wr %g5, CLEAR_SOFTINT /* * For Cheetah*, call cpu_tl1_error via systrap at PIL 15 * to process the Fast ECC/Cache Parity at TL>0 error. Clear * panic flag (%g2). */ set cpu_tl1_error, %g1 clr %g2 ba sys_trap mov PIL_15, %g4 1: /* * The logout is invalid. * * Call the default interrupt handler. */ sethi %hi(pil_interrupt), %g1 jmp %g1 + %lo(pil_interrupt) mov PIL_15, %g4 SET_SIZE(ch_pil15_interrupt) #endif /* * Error Handling * * Cheetah provides error checking for all memory access paths between * the CPU, External Cache, Cheetah Data Switch and system bus. Error * information is logged in the AFSR, (also AFSR_EXT for Panther) and * AFAR and one of the following traps is generated (provided that it * is enabled in External Cache Error Enable Register) to handle that * error: * 1. trap 0x70: Precise trap * tt0_fecc for errors at trap level(TL)>=0 * 2. trap 0x0A and 0x32: Deferred trap * async_err for errors at TL>=0 * 3. trap 0x63: Disrupting trap * ce_err for errors at TL=0 * (Note that trap 0x63 cannot happen at trap level > 0) * * Trap level one handlers panic the system except for the fast ecc * error handler which tries to recover from certain errors. */ /* * FAST ECC TRAP STRATEGY: * * Software must handle single and multi bit errors which occur due to data * or instruction cache reads from the external cache. A single or multi bit * error occuring in one of these situations results in a precise trap. * * The basic flow of this trap handler is as follows: * * 1) Record the state and then turn off the Dcache and Icache. The Dcache * is disabled because bad data could have been installed. The Icache is * turned off because we want to capture the Icache line related to the * AFAR. * 2) Disable trapping on CEEN/NCCEN errors during TL=0 processing. * 3) Park sibling core if caches are shared (to avoid race condition while * accessing shared resources such as L3 data staging register during * CPU logout. * 4) Read the AFAR and AFSR. * 5) If CPU logout structure is not being used, then: * 6) Clear all errors from the AFSR. * 7) Capture Ecache, Dcache and Icache lines in "CPU log out" structure. * 8) Flush Ecache then Flush Dcache and Icache and restore to previous * state. * 9) Unpark sibling core if we parked it earlier. * 10) call cpu_fast_ecc_error via systrap at PIL 14 unless we're already * running at PIL 15. * 6) Otherwise, if CPU logout structure is being used: * 7) Incriment the "logout busy count". * 8) Flush Ecache then Flush Dcache and Icache and restore to previous * state. * 9) Unpark sibling core if we parked it earlier. * 10) Issue a retry since the other CPU error logging code will end up * finding this error bit and logging information about it later. * 7) Alternatively (to 5 and 6 above), if the cpu_private struct is not * yet initialized such that we can't even check the logout struct, then * we place the clo_flags data into %g2 (sys_trap->have_win arg #1) and * call cpu_fast_ecc_error via systrap. The clo_flags parameter is used * to determine information such as TL, TT, CEEN and NCEEN settings, etc * in the high level trap handler since we don't have access to detailed * logout information in cases where the cpu_private struct is not yet * initialized. * * We flush the E$ and D$ here on TL=1 code to prevent getting nested * Fast ECC traps in the TL=0 code. If we get a Fast ECC event here in * the TL=1 code, we will go to the Fast ECC at TL>0 handler which, * since it is uses different code/data from this handler, has a better * chance of fixing things up than simply recursing through this code * again (this would probably cause an eventual kernel stack overflow). * If the Fast ECC at TL>0 handler encounters a Fast ECC error before it * can flush the E$ (or the error is a stuck-at bit), we will recurse in * the Fast ECC at TL>0 handler and eventually Red Mode. * * Note that for Cheetah (and only Cheetah), we use alias addresses for * flushing rather than ASI accesses (which don't exist on Cheetah). * Should we encounter a Fast ECC error within this handler on Cheetah, * there's a good chance it's within the ecache_flushaddr buffer (since * it's the largest piece of memory we touch in the handler and it is * usually kernel text/data). For that reason the Fast ECC at TL>0 * handler for Cheetah uses an alternate buffer: ecache_tl1_flushaddr. */ /* * Cheetah ecc-protected E$ trap (Trap 70) at TL=0 * tt0_fecc is replaced by fecc_err_instr in cpu_init_trap of the various * architecture-specific files. * NB: Must be 8 instructions or less to fit in trap table and code must * be relocatable. */ #if defined(lint) void fecc_err_instr(void) {} #else /* lint */ ENTRY_NP(fecc_err_instr) membar #Sync ! Cheetah requires membar #Sync /* * Save current DCU state. Turn off the Dcache and Icache. */ ldxa [%g0]ASI_DCU, %g1 ! save DCU in %g1 andn %g1, DCU_DC + DCU_IC, %g4 stxa %g4, [%g0]ASI_DCU flush %g0 /* flush required after changing the IC bit */ ASM_JMP(%g4, fast_ecc_err) SET_SIZE(fecc_err_instr) #endif /* lint */ #if !(defined(JALAPENO) || defined(SERRANO)) #if defined(lint) void fast_ecc_err(void) {} #else /* lint */ .section ".text" .align 64 ENTRY_NP(fast_ecc_err) /* * Turn off CEEN and NCEEN. */ ldxa [%g0]ASI_ESTATE_ERR, %g3 andn %g3, EN_REG_NCEEN + EN_REG_CEEN, %g4 stxa %g4, [%g0]ASI_ESTATE_ERR membar #Sync ! membar sync required /* * Check to see whether we need to park our sibling core * before recording diagnostic information from caches * which may be shared by both cores. * We use %g1 to store information about whether or not * we had to park the core (%g1 holds our DCUCR value and * we only use bits from that register which are "reserved" * to keep track of core parking) so that we know whether * or not to unpark later. %g5 and %g4 are scratch registers. */ PARK_SIBLING_CORE(%g1, %g5, %g4) /* * Do the CPU log out capture. * %g3 = "failed?" return value. * %g2 = Input = AFAR. Output the clo_flags info which is passed * into this macro via %g4. Output only valid if cpu_private * struct has not been initialized. * CHPR_FECCTL0_LOGOUT = cpu logout structure offset input * %g4 = Trap information stored in the cpu logout flags field * %g5 = scr1 * %g6 = scr2 * %g3 = scr3 * %g4 = scr4 */ /* store the CEEN and NCEEN values, TL=0 */ and %g3, EN_REG_CEEN + EN_REG_NCEEN, %g4 set CHPR_FECCTL0_LOGOUT, %g6 DO_CPU_LOGOUT(%g3, %g2, %g6, %g4, %g5, %g6, %g3, %g4) /* * Flush the Ecache (and L2 cache for Panther) to get the error out * of the Ecache. If the UCC or UCU is on a dirty line, then the * following flush will turn that into a WDC or WDU, respectively. */ PN_L2_FLUSHALL(%g4, %g5, %g6) CPU_INDEX(%g4, %g5) mulx %g4, CPU_NODE_SIZE, %g4 set cpunodes, %g5 add %g4, %g5, %g4 ld [%g4 + ECACHE_LINESIZE], %g5 ld [%g4 + ECACHE_SIZE], %g4 ASM_LDX(%g6, ecache_flushaddr) ECACHE_FLUSHALL(%g4, %g5, %g6, %g7) /* * Flush the Dcache. Since bad data could have been installed in * the Dcache we must flush it before re-enabling it. */ ASM_LD(%g5, dcache_size) ASM_LD(%g6, dcache_linesize) CH_DCACHE_FLUSHALL(%g5, %g6, %g7) /* * Flush the Icache. Since we turned off the Icache to capture the * Icache line it is now stale or corrupted and we must flush it * before re-enabling it. */ GET_CPU_PRIVATE_PTR(%g0, %g5, %g7, fast_ecc_err_5); ld [%g5 + CHPR_ICACHE_LINESIZE], %g6 ba,pt %icc, 6f ld [%g5 + CHPR_ICACHE_SIZE], %g5 fast_ecc_err_5: ASM_LD(%g5, icache_size) ASM_LD(%g6, icache_linesize) 6: CH_ICACHE_FLUSHALL(%g5, %g6, %g7, %g4) /* * check to see whether we parked our sibling core at the start * of this handler. If so, we need to unpark it here. * We use DCUCR reserved bits (stored in %g1) to keep track of * whether or not we need to unpark. %g5 and %g4 are scratch registers. */ UNPARK_SIBLING_CORE(%g1, %g5, %g4) /* * Restore the Dcache and Icache to the previous state. */ stxa %g1, [%g0]ASI_DCU flush %g0 /* flush required after changing the IC bit */ /* * Make sure our CPU logout operation was successful. */ cmp %g3, %g0 be 8f nop /* * If the logout structure had been busy, how many times have * we tried to use it and failed (nesting count)? If we have * already recursed a substantial number of times, then we can * assume things are not going to get better by themselves and * so it would be best to panic. */ cmp %g3, CLO_NESTING_MAX blt 7f nop call ptl1_panic mov PTL1_BAD_ECC, %g1 7: /* * Otherwise, if the logout structure was busy but we have not * nested more times than our maximum value, then we simply * issue a retry. Our TL=0 trap handler code will check and * clear the AFSR after it is done logging what is currently * in the logout struct and handle this event at that time. */ retry 8: /* * Call cpu_fast_ecc_error via systrap at PIL 14 unless we're * already at PIL 15. */ set cpu_fast_ecc_error, %g1 rdpr %pil, %g4 cmp %g4, PIL_14 ba sys_trap movl %icc, PIL_14, %g4 SET_SIZE(fast_ecc_err) #endif /* lint */ #endif /* !(JALAPENO || SERRANO) */ /* * Cheetah/Cheetah+ Fast ECC at TL>0 trap strategy: * * The basic flow of this trap handler is as follows: * * 1) In the "trap 70" trap table code (fecc_err_tl1_instr), generate a * software trap 0 ("ta 0") to buy an extra set of %tpc, etc. which we * will use to save %g1 and %g2. * 2) At the software trap 0 at TL>0 trap table code (fecc_err_tl1_cont_instr), * we save %g1+%g2 using %tpc, %tnpc + %tstate and jump to the fast ecc * handler (using the just saved %g1). * 3) Turn off the Dcache if it was on and save the state of the Dcache * (whether on or off) in Bit2 (CH_ERR_TSTATE_DC_ON) of %tstate. * NB: we don't turn off the Icache because bad data is not installed nor * will we be doing any diagnostic accesses. * 4) compute physical address of the per-cpu/per-tl save area using %g1+%g2 * 5) Save %g1-%g7 into the per-cpu/per-tl save area (%g1 + %g2 from the * %tpc, %tnpc, %tstate values previously saved). * 6) set %tl to %tl - 1. * 7) Save the appropriate flags and TPC in the ch_err_tl1_data structure. * 8) Save the value of CH_ERR_TSTATE_DC_ON in the ch_err_tl1_tmp field. * 9) For Cheetah and Jalapeno, read the AFAR and AFSR and clear. For * Cheetah+ (and later), read the shadow AFAR and AFSR but don't clear. * Save the values in ch_err_tl1_data. For Panther, read the shadow * AFSR_EXT and save the value in ch_err_tl1_data. * 10) Disable CEEN/NCEEN to prevent any disrupting/deferred errors from * being queued. We'll report them via the AFSR/AFAR capture in step 13. * 11) Flush the Ecache. * NB: the Ecache is flushed assuming the largest possible size with * the smallest possible line size since access to the cpu_nodes may * cause an unrecoverable DTLB miss. * 12) Reenable CEEN/NCEEN with the value saved from step 10. * 13) For Cheetah and Jalapeno, read the AFAR and AFSR and clear again. * For Cheetah+ (and later), read the primary AFAR and AFSR and now clear. * Save the read AFSR/AFAR values in ch_err_tl1_data. For Panther, * read and clear the primary AFSR_EXT and save it in ch_err_tl1_data. * 14) Flush and re-enable the Dcache if it was on at step 3. * 15) Do TRAPTRACE if enabled. * 16) Check if a UCU->WDU (or L3_UCU->WDU for Panther) happened, panic if so. * 17) Set the event pending flag in ch_err_tl1_pending[CPU] * 18) Cause a softint 15. The pil15_interrupt handler will inspect the * event pending flag and call cpu_tl1_error via systrap if set. * 19) Restore the registers from step 5 and issue retry. */ /* * Cheetah ecc-protected E$ trap (Trap 70) at TL>0 * tt1_fecc is replaced by fecc_err_tl1_instr in cpu_init_trap of the various * architecture-specific files. This generates a "Software Trap 0" at TL>0, * which goes to fecc_err_tl1_cont_instr, and we continue the handling there. * NB: Must be 8 instructions or less to fit in trap table and code must * be relocatable. */ #if defined(lint) void fecc_err_tl1_instr(void) {} #else /* lint */ ENTRY_NP(fecc_err_tl1_instr) CH_ERR_TL1_TRAPENTRY(SWTRAP_0); SET_SIZE(fecc_err_tl1_instr) #endif /* lint */ /* * Software trap 0 at TL>0. * tt1_swtrap0 is replaced by fecc_err_tl1_cont_instr in cpu_init_trap of * the various architecture-specific files. This is used as a continuation * of the fast ecc handling where we've bought an extra TL level, so we can * use %tpc, %tnpc, %tstate to temporarily save the value of registers %g1 * and %g2. Note that %tstate has bits 0-2 and then bits 8-19 as r/w, * there's a reserved hole from 3-7. We only use bits 0-1 and 8-9 (the low * order two bits from %g1 and %g2 respectively). * NB: Must be 8 instructions or less to fit in trap table and code must * be relocatable. */ #if defined(lint) void fecc_err_tl1_cont_instr(void) {} #else /* lint */ ENTRY_NP(fecc_err_tl1_cont_instr) CH_ERR_TL1_SWTRAPENTRY(fast_ecc_tl1_err) SET_SIZE(fecc_err_tl1_cont_instr) #endif /* lint */ #if defined(lint) void ce_err(void) {} #else /* lint */ /* * The ce_err function handles disrupting trap type 0x63 at TL=0. * * AFSR errors bits which cause this trap are: * CE, EMC, EDU:ST, EDC, WDU, WDC, CPU, CPC, IVU, IVC * * NCEEN Bit of Cheetah External Cache Error Enable Register enables * the following AFSR disrupting traps: EDU:ST, WDU, CPU, IVU * * CEEN Bit of Cheetah External Cache Error Enable Register enables * the following AFSR disrupting traps: CE, EMC, EDC, WDC, CPC, IVC * * Cheetah+ also handles (No additional processing required): * DUE, DTO, DBERR (NCEEN controlled) * THCE (CEEN and ET_ECC_en controlled) * TUE (ET_ECC_en controlled) * * Panther further adds: * IMU, L3_EDU, L3_WDU, L3_CPU (NCEEN controlled) * IMC, L3_EDC, L3_WDC, L3_CPC, L3_THCE (CEEN controlled) * TUE_SH, TUE (NCEEN and L2_tag_ECC_en controlled) * L3_TUE, L3_TUE_SH (NCEEN and ET_ECC_en controlled) * THCE (CEEN and L2_tag_ECC_en controlled) * L3_THCE (CEEN and ET_ECC_en controlled) * * Steps: * 1. Disable hardware corrected disrupting errors only (CEEN) * 2. Park sibling core if caches are shared (to avoid race * condition while accessing shared resources such as L3 * data staging register during CPU logout. * 3. If the CPU logout structure is not currently being used: * 4. Clear AFSR error bits * 5. Capture Ecache, Dcache and Icache lines associated * with AFAR. * 6. Unpark sibling core if we parked it earlier. * 7. call cpu_disrupting_error via sys_trap at PIL 14 * unless we're already running at PIL 15. * 4. Otherwise, if the CPU logout structure is busy: * 5. Incriment "logout busy count" and place into %g3 * 6. Unpark sibling core if we parked it earlier. * 7. Issue a retry since the other CPU error logging * code will end up finding this error bit and logging * information about it later. * 5. Alternatively (to 3 and 4 above), if the cpu_private struct is * not yet initialized such that we can't even check the logout * struct, then we place the clo_flags data into %g2 * (sys_trap->have_win arg #1) and call cpu_disrupting_error via * systrap. The clo_flags parameter is used to determine information * such as TL, TT, CEEN settings, etc in the high level trap * handler since we don't have access to detailed logout information * in cases where the cpu_private struct is not yet initialized. * * %g3: [ logout busy count ] - arg #2 * %g2: [ clo_flags if cpu_private unavailable ] - sys_trap->have_win: arg #1 */ .align 128 ENTRY_NP(ce_err) membar #Sync ! Cheetah requires membar #Sync /* * Disable trap on hardware corrected errors (CEEN) while at TL=0 * to prevent recursion. */ ldxa [%g0]ASI_ESTATE_ERR, %g1 bclr EN_REG_CEEN, %g1 stxa %g1, [%g0]ASI_ESTATE_ERR membar #Sync ! membar sync required /* * Save current DCU state. Turn off Icache to allow capture of * Icache data by DO_CPU_LOGOUT. */ ldxa [%g0]ASI_DCU, %g1 ! save DCU in %g1 andn %g1, DCU_IC, %g4 stxa %g4, [%g0]ASI_DCU flush %g0 /* flush required after changing the IC bit */ /* * Check to see whether we need to park our sibling core * before recording diagnostic information from caches * which may be shared by both cores. * We use %g1 to store information about whether or not * we had to park the core (%g1 holds our DCUCR value and * we only use bits from that register which are "reserved" * to keep track of core parking) so that we know whether * or not to unpark later. %g5 and %g4 are scratch registers. */ PARK_SIBLING_CORE(%g1, %g5, %g4) /* * Do the CPU log out capture. * %g3 = "failed?" return value. * %g2 = Input = AFAR. Output the clo_flags info which is passed * into this macro via %g4. Output only valid if cpu_private * struct has not been initialized. * CHPR_CECC_LOGOUT = cpu logout structure offset input * %g4 = Trap information stored in the cpu logout flags field * %g5 = scr1 * %g6 = scr2 * %g3 = scr3 * %g4 = scr4 */ clr %g4 ! TL=0 bit in afsr set CHPR_CECC_LOGOUT, %g6 DO_CPU_LOGOUT(%g3, %g2, %g6, %g4, %g5, %g6, %g3, %g4) /* * Flush the Icache. Since we turned off the Icache to capture the * Icache line it is now stale or corrupted and we must flush it * before re-enabling it. */ GET_CPU_PRIVATE_PTR(%g0, %g5, %g7, ce_err_1); ld [%g5 + CHPR_ICACHE_LINESIZE], %g6 ba,pt %icc, 2f ld [%g5 + CHPR_ICACHE_SIZE], %g5 ce_err_1: ASM_LD(%g5, icache_size) ASM_LD(%g6, icache_linesize) 2: CH_ICACHE_FLUSHALL(%g5, %g6, %g7, %g4) /* * check to see whether we parked our sibling core at the start * of this handler. If so, we need to unpark it here. * We use DCUCR reserved bits (stored in %g1) to keep track of * whether or not we need to unpark. %g5 and %g4 are scratch registers. */ UNPARK_SIBLING_CORE(%g1, %g5, %g4) /* * Restore Icache to previous state. */ stxa %g1, [%g0]ASI_DCU flush %g0 /* flush required after changing the IC bit */ /* * Make sure our CPU logout operation was successful. */ cmp %g3, %g0 be 4f nop /* * If the logout structure had been busy, how many times have * we tried to use it and failed (nesting count)? If we have * already recursed a substantial number of times, then we can * assume things are not going to get better by themselves and * so it would be best to panic. */ cmp %g3, CLO_NESTING_MAX blt 3f nop call ptl1_panic mov PTL1_BAD_ECC, %g1 3: /* * Otherwise, if the logout structure was busy but we have not * nested more times than our maximum value, then we simply * issue a retry. Our TL=0 trap handler code will check and * clear the AFSR after it is done logging what is currently * in the logout struct and handle this event at that time. */ retry 4: /* * Call cpu_disrupting_error via systrap at PIL 14 unless we're * already at PIL 15. */ set cpu_disrupting_error, %g1 rdpr %pil, %g4 cmp %g4, PIL_14 ba sys_trap movl %icc, PIL_14, %g4 SET_SIZE(ce_err) #endif /* lint */ #if defined(lint) /* * This trap cannot happen at TL>0 which means this routine will never * actually be called and so we treat this like a BAD TRAP panic. */ void ce_err_tl1(void) {} #else /* lint */ .align 64 ENTRY_NP(ce_err_tl1) call ptl1_panic mov PTL1_BAD_TRAP, %g1 SET_SIZE(ce_err_tl1) #endif /* lint */ #if defined(lint) void async_err(void) {} #else /* lint */ /* * The async_err function handles deferred trap types 0xA * (instruction_access_error) and 0x32 (data_access_error) at TL>=0. * * AFSR errors bits which cause this trap are: * UE, EMU, EDU:BLD, L3_EDU:BLD, TO, BERR * On some platforms, EMU may causes cheetah to pull the error pin * never giving Solaris a chance to take a trap. * * NCEEN Bit of Cheetah External Cache Error Enable Register enables * the following AFSR deferred traps: UE, EMU, EDU:BLD, TO, BERR * * Steps: * 1. Disable CEEN and NCEEN errors to prevent recursive errors. * 2. Turn D$ off per Cheetah PRM P.5 Note 6, turn I$ off to capture * I$ line in DO_CPU_LOGOUT. * 3. Park sibling core if caches are shared (to avoid race * condition while accessing shared resources such as L3 * data staging register during CPU logout. * 4. If the CPU logout structure is not currently being used: * 5. Clear AFSR error bits * 6. Capture Ecache, Dcache and Icache lines associated * with AFAR. * 7. Unpark sibling core if we parked it earlier. * 8. call cpu_deferred_error via sys_trap. * 5. Otherwise, if the CPU logout structure is busy: * 6. Incriment "logout busy count" * 7. Unpark sibling core if we parked it earlier. * 8) Issue a retry since the other CPU error logging * code will end up finding this error bit and logging * information about it later. * 6. Alternatively (to 4 and 5 above), if the cpu_private struct is * not yet initialized such that we can't even check the logout * struct, then we place the clo_flags data into %g2 * (sys_trap->have_win arg #1) and call cpu_deferred_error via * systrap. The clo_flags parameter is used to determine information * such as TL, TT, CEEN settings, etc in the high level trap handler * since we don't have access to detailed logout information in cases * where the cpu_private struct is not yet initialized. * * %g2: [ clo_flags if cpu_private unavailable ] - sys_trap->have_win: arg #1 * %g3: [ logout busy count ] - arg #2 */ ENTRY_NP(async_err) membar #Sync ! Cheetah requires membar #Sync /* * Disable CEEN and NCEEN. */ ldxa [%g0]ASI_ESTATE_ERR, %g3 andn %g3, EN_REG_NCEEN + EN_REG_CEEN, %g4 stxa %g4, [%g0]ASI_ESTATE_ERR membar #Sync ! membar sync required /* * Save current DCU state. * Disable Icache to allow capture of Icache data by DO_CPU_LOGOUT. * Do this regardless of whether this is a Data Access Error or * Instruction Access Error Trap. * Disable Dcache for both Data Access Error and Instruction Access * Error per Cheetah PRM P.5 Note 6. */ ldxa [%g0]ASI_DCU, %g1 ! save DCU in %g1 andn %g1, DCU_IC + DCU_DC, %g4 stxa %g4, [%g0]ASI_DCU flush %g0 /* flush required after changing the IC bit */ /* * Check to see whether we need to park our sibling core * before recording diagnostic information from caches * which may be shared by both cores. * We use %g1 to store information about whether or not * we had to park the core (%g1 holds our DCUCR value and * we only use bits from that register which are "reserved" * to keep track of core parking) so that we know whether * or not to unpark later. %g6 and %g4 are scratch registers. */ PARK_SIBLING_CORE(%g1, %g6, %g4) /* * Do the CPU logout capture. * * %g3 = "failed?" return value. * %g2 = Input = AFAR. Output the clo_flags info which is passed * into this macro via %g4. Output only valid if cpu_private * struct has not been initialized. * CHPR_ASYNC_LOGOUT = cpu logout structure offset input * %g4 = Trap information stored in the cpu logout flags field * %g5 = scr1 * %g6 = scr2 * %g3 = scr3 * %g4 = scr4 */ andcc %g5, T_TL1, %g0 clr %g6 movnz %xcc, 1, %g6 ! set %g6 if T_TL1 set sllx %g6, CLO_FLAGS_TL_SHIFT, %g6 sllx %g5, CLO_FLAGS_TT_SHIFT, %g4 set CLO_FLAGS_TT_MASK, %g2 and %g4, %g2, %g4 ! ttype or %g6, %g4, %g4 ! TT and TL and %g3, EN_REG_CEEN, %g3 ! CEEN value or %g3, %g4, %g4 ! TT and TL and CEEN set CHPR_ASYNC_LOGOUT, %g6 DO_CPU_LOGOUT(%g3, %g2, %g6, %g4, %g5, %g6, %g3, %g4) /* * If the logout struct was busy, we may need to pass the * TT, TL, and CEEN information to the TL=0 handler via * systrap parameter so save it off here. */ cmp %g3, %g0 be 1f nop sllx %g4, 32, %g4 or %g4, %g3, %g3 1: /* * Flush the Icache. Since we turned off the Icache to capture the * Icache line it is now stale or corrupted and we must flush it * before re-enabling it. */ GET_CPU_PRIVATE_PTR(%g0, %g5, %g7, async_err_1); ld [%g5 + CHPR_ICACHE_LINESIZE], %g6 ba,pt %icc, 2f ld [%g5 + CHPR_ICACHE_SIZE], %g5 async_err_1: ASM_LD(%g5, icache_size) ASM_LD(%g6, icache_linesize) 2: CH_ICACHE_FLUSHALL(%g5, %g6, %g7, %g4) /* * XXX - Don't we need to flush the Dcache before turning it back * on to avoid stale or corrupt data? Was this broken? */ /* * Flush the Dcache before turning it back on since it may now * contain stale or corrupt data. */ ASM_LD(%g5, dcache_size) ASM_LD(%g6, dcache_linesize) CH_DCACHE_FLUSHALL(%g5, %g6, %g7) /* * check to see whether we parked our sibling core at the start * of this handler. If so, we need to unpark it here. * We use DCUCR reserved bits (stored in %g1) to keep track of * whether or not we need to unpark. %g5 and %g7 are scratch registers. */ UNPARK_SIBLING_CORE(%g1, %g5, %g7) /* * Restore Icache and Dcache to previous state. */ stxa %g1, [%g0]ASI_DCU flush %g0 /* flush required after changing the IC bit */ /* * Make sure our CPU logout operation was successful. */ cmp %g3, %g0 be 4f nop /* * If the logout structure had been busy, how many times have * we tried to use it and failed (nesting count)? If we have * already recursed a substantial number of times, then we can * assume things are not going to get better by themselves and * so it would be best to panic. */ cmp %g3, CLO_NESTING_MAX blt 3f nop call ptl1_panic mov PTL1_BAD_ECC, %g1 3: /* * Otherwise, if the logout structure was busy but we have not * nested more times than our maximum value, then we simply * issue a retry. Our TL=0 trap handler code will check and * clear the AFSR after it is done logging what is currently * in the logout struct and handle this event at that time. */ retry 4: RESET_USER_RTT_REGS(%g4, %g5, async_err_resetskip) async_err_resetskip: set cpu_deferred_error, %g1 ba sys_trap mov PIL_15, %g4 ! run at pil 15 SET_SIZE(async_err) #endif /* lint */ #if defined(CPU_IMP_L1_CACHE_PARITY) /* * D$ parity error trap (trap 71) at TL=0. * tt0_dperr is replaced by dcache_parity_instr in cpu_init_trap of * the various architecture-specific files. This merely sets up the * arguments for cpu_parity_error and calls it via sys_trap. * NB: Must be 8 instructions or less to fit in trap table and code must * be relocatable. */ #if defined(lint) void dcache_parity_instr(void) {} #else /* lint */ ENTRY_NP(dcache_parity_instr) membar #Sync ! Cheetah+ requires membar #Sync set cpu_parity_error, %g1 or %g0, CH_ERR_DPE, %g2 rdpr %tpc, %g3 sethi %hi(sys_trap), %g7 jmp %g7 + %lo(sys_trap) mov PIL_15, %g4 ! run at pil 15 SET_SIZE(dcache_parity_instr) #endif /* lint */ /* * D$ parity error trap (trap 71) at TL>0. * tt1_dperr is replaced by dcache_parity_tl1_instr in cpu_init_trap of * the various architecture-specific files. This generates a "Software * Trap 1" at TL>0, which goes to dcache_parity_tl1_cont_instr, and we * continue the handling there. * NB: Must be 8 instructions or less to fit in trap table and code must * be relocatable. */ #if defined(lint) void dcache_parity_tl1_instr(void) {} #else /* lint */ ENTRY_NP(dcache_parity_tl1_instr) CH_ERR_TL1_TRAPENTRY(SWTRAP_1); SET_SIZE(dcache_parity_tl1_instr) #endif /* lint */ /* * Software trap 1 at TL>0. * tt1_swtrap1 is replaced by dcache_parity_tl1_cont_instr in cpu_init_trap * of the various architecture-specific files. This is used as a continuation * of the dcache parity handling where we've bought an extra TL level, so we * can use %tpc, %tnpc, %tstate to temporarily save the value of registers %g1 * and %g2. Note that %tstate has bits 0-2 and then bits 8-19 as r/w, * there's a reserved hole from 3-7. We only use bits 0-1 and 8-9 (the low * order two bits from %g1 and %g2 respectively). * NB: Must be 8 instructions or less to fit in trap table and code must * be relocatable. */ #if defined(lint) void dcache_parity_tl1_cont_instr(void) {} #else /* lint */ ENTRY_NP(dcache_parity_tl1_cont_instr) CH_ERR_TL1_SWTRAPENTRY(dcache_parity_tl1_err); SET_SIZE(dcache_parity_tl1_cont_instr) #endif /* lint */ /* * D$ parity error at TL>0 handler * We get here via trap 71 at TL>0->Software trap 1 at TL>0. We enter * this routine with %g1 and %g2 already saved in %tpc, %tnpc and %tstate. */ #if defined(lint) void dcache_parity_tl1_err(void) {} #else /* lint */ ENTRY_NP(dcache_parity_tl1_err) /* * This macro saves all the %g registers in the ch_err_tl1_data * structure, updates the ch_err_tl1_flags and saves the %tpc in * ch_err_tl1_tpc. At the end of this macro, %g1 will point to * the ch_err_tl1_data structure and %g2 will have the original * flags in the ch_err_tl1_data structure. All %g registers * except for %g1 and %g2 will be available. */ CH_ERR_TL1_ENTER(CH_ERR_DPE); #ifdef TRAPTRACE /* * Get current trap trace entry physical pointer. */ CPU_INDEX(%g6, %g5) sll %g6, TRAPTR_SIZE_SHIFT, %g6 set trap_trace_ctl, %g5 add %g6, %g5, %g6 ld [%g6 + TRAPTR_LIMIT], %g5 tst %g5 be %icc, dpe_tl1_skip_tt nop ldx [%g6 + TRAPTR_PBASE], %g5 ld [%g6 + TRAPTR_OFFSET], %g4 add %g5, %g4, %g5 /* * Create trap trace entry. */ rd %asi, %g7 wr %g0, TRAPTR_ASI, %asi rd STICK, %g4 stxa %g4, [%g5 + TRAP_ENT_TICK]%asi rdpr %tl, %g4 stha %g4, [%g5 + TRAP_ENT_TL]%asi rdpr %tt, %g4 stha %g4, [%g5 + TRAP_ENT_TT]%asi rdpr %tpc, %g4 stna %g4, [%g5 + TRAP_ENT_TPC]%asi rdpr %tstate, %g4 stxa %g4, [%g5 + TRAP_ENT_TSTATE]%asi stna %sp, [%g5 + TRAP_ENT_SP]%asi stna %g0, [%g5 + TRAP_ENT_TR]%asi stna %g0, [%g5 + TRAP_ENT_F1]%asi stna %g0, [%g5 + TRAP_ENT_F2]%asi stna %g0, [%g5 + TRAP_ENT_F3]%asi stna %g0, [%g5 + TRAP_ENT_F4]%asi wr %g0, %g7, %asi /* * Advance trap trace pointer. */ ld [%g6 + TRAPTR_OFFSET], %g5 ld [%g6 + TRAPTR_LIMIT], %g4 st %g5, [%g6 + TRAPTR_LAST_OFFSET] add %g5, TRAP_ENT_SIZE, %g5 sub %g4, TRAP_ENT_SIZE, %g4 cmp %g5, %g4 movge %icc, 0, %g5 st %g5, [%g6 + TRAPTR_OFFSET] dpe_tl1_skip_tt: #endif /* TRAPTRACE */ /* * I$ and D$ are automatically turned off by HW when the CPU hits * a dcache or icache parity error so we will just leave those two * off for now to avoid repeating this trap. * For Panther, however, since we trap on P$ data parity errors * and HW does not automatically disable P$, we need to disable it * here so that we don't encounter any recursive traps when we * issue the retry. */ ldxa [%g0]ASI_DCU, %g3 mov 1, %g4 sllx %g4, DCU_PE_SHIFT, %g4 andn %g3, %g4, %g3 stxa %g3, [%g0]ASI_DCU membar #Sync /* * We fall into this macro if we've successfully logged the error in * the ch_err_tl1_data structure and want the PIL15 softint to pick * it up and log it. %g1 must point to the ch_err_tl1_data structure. * Restores the %g registers and issues retry. */ CH_ERR_TL1_EXIT; SET_SIZE(dcache_parity_tl1_err) #endif /* lint */ /* * I$ parity error trap (trap 72) at TL=0. * tt0_iperr is replaced by icache_parity_instr in cpu_init_trap of * the various architecture-specific files. This merely sets up the * arguments for cpu_parity_error and calls it via sys_trap. * NB: Must be 8 instructions or less to fit in trap table and code must * be relocatable. */ #if defined(lint) void icache_parity_instr(void) {} #else /* lint */ ENTRY_NP(icache_parity_instr) membar #Sync ! Cheetah+ requires membar #Sync set cpu_parity_error, %g1 or %g0, CH_ERR_IPE, %g2 rdpr %tpc, %g3 sethi %hi(sys_trap), %g7 jmp %g7 + %lo(sys_trap) mov PIL_15, %g4 ! run at pil 15 SET_SIZE(icache_parity_instr) #endif /* lint */ /* * I$ parity error trap (trap 72) at TL>0. * tt1_iperr is replaced by icache_parity_tl1_instr in cpu_init_trap of * the various architecture-specific files. This generates a "Software * Trap 2" at TL>0, which goes to icache_parity_tl1_cont_instr, and we * continue the handling there. * NB: Must be 8 instructions or less to fit in trap table and code must * be relocatable. */ #if defined(lint) void icache_parity_tl1_instr(void) {} #else /* lint */ ENTRY_NP(icache_parity_tl1_instr) CH_ERR_TL1_TRAPENTRY(SWTRAP_2); SET_SIZE(icache_parity_tl1_instr) #endif /* lint */ /* * Software trap 2 at TL>0. * tt1_swtrap2 is replaced by icache_parity_tl1_cont_instr in cpu_init_trap * of the various architecture-specific files. This is used as a continuation * of the icache parity handling where we've bought an extra TL level, so we * can use %tpc, %tnpc, %tstate to temporarily save the value of registers %g1 * and %g2. Note that %tstate has bits 0-2 and then bits 8-19 as r/w, * there's a reserved hole from 3-7. We only use bits 0-1 and 8-9 (the low * order two bits from %g1 and %g2 respectively). * NB: Must be 8 instructions or less to fit in trap table and code must * be relocatable. */ #if defined(lint) void icache_parity_tl1_cont_instr(void) {} #else /* lint */ ENTRY_NP(icache_parity_tl1_cont_instr) CH_ERR_TL1_SWTRAPENTRY(icache_parity_tl1_err); SET_SIZE(icache_parity_tl1_cont_instr) #endif /* lint */ /* * I$ parity error at TL>0 handler * We get here via trap 72 at TL>0->Software trap 2 at TL>0. We enter * this routine with %g1 and %g2 already saved in %tpc, %tnpc and %tstate. */ #if defined(lint) void icache_parity_tl1_err(void) {} #else /* lint */ ENTRY_NP(icache_parity_tl1_err) /* * This macro saves all the %g registers in the ch_err_tl1_data * structure, updates the ch_err_tl1_flags and saves the %tpc in * ch_err_tl1_tpc. At the end of this macro, %g1 will point to * the ch_err_tl1_data structure and %g2 will have the original * flags in the ch_err_tl1_data structure. All %g registers * except for %g1 and %g2 will be available. */ CH_ERR_TL1_ENTER(CH_ERR_IPE); #ifdef TRAPTRACE /* * Get current trap trace entry physical pointer. */ CPU_INDEX(%g6, %g5) sll %g6, TRAPTR_SIZE_SHIFT, %g6 set trap_trace_ctl, %g5 add %g6, %g5, %g6 ld [%g6 + TRAPTR_LIMIT], %g5 tst %g5 be %icc, ipe_tl1_skip_tt nop ldx [%g6 + TRAPTR_PBASE], %g5 ld [%g6 + TRAPTR_OFFSET], %g4 add %g5, %g4, %g5 /* * Create trap trace entry. */ rd %asi, %g7 wr %g0, TRAPTR_ASI, %asi rd STICK, %g4 stxa %g4, [%g5 + TRAP_ENT_TICK]%asi rdpr %tl, %g4 stha %g4, [%g5 + TRAP_ENT_TL]%asi rdpr %tt, %g4 stha %g4, [%g5 + TRAP_ENT_TT]%asi rdpr %tpc, %g4 stna %g4, [%g5 + TRAP_ENT_TPC]%asi rdpr %tstate, %g4 stxa %g4, [%g5 + TRAP_ENT_TSTATE]%asi stna %sp, [%g5 + TRAP_ENT_SP]%asi stna %g0, [%g5 + TRAP_ENT_TR]%asi stna %g0, [%g5 + TRAP_ENT_F1]%asi stna %g0, [%g5 + TRAP_ENT_F2]%asi stna %g0, [%g5 + TRAP_ENT_F3]%asi stna %g0, [%g5 + TRAP_ENT_F4]%asi wr %g0, %g7, %asi /* * Advance trap trace pointer. */ ld [%g6 + TRAPTR_OFFSET], %g5 ld [%g6 + TRAPTR_LIMIT], %g4 st %g5, [%g6 + TRAPTR_LAST_OFFSET] add %g5, TRAP_ENT_SIZE, %g5 sub %g4, TRAP_ENT_SIZE, %g4 cmp %g5, %g4 movge %icc, 0, %g5 st %g5, [%g6 + TRAPTR_OFFSET] ipe_tl1_skip_tt: #endif /* TRAPTRACE */ /* * We fall into this macro if we've successfully logged the error in * the ch_err_tl1_data structure and want the PIL15 softint to pick * it up and log it. %g1 must point to the ch_err_tl1_data structure. * Restores the %g registers and issues retry. */ CH_ERR_TL1_EXIT; SET_SIZE(icache_parity_tl1_err) #endif /* lint */ #endif /* CPU_IMP_L1_CACHE_PARITY */ /* * The itlb_rd_entry and dtlb_rd_entry functions return the tag portion of the * tte, the virtual address, and the ctxnum of the specified tlb entry. They * should only be used in places where you have no choice but to look at the * tlb itself. * * Note: These two routines are required by the Estar "cpr" loadable module. */ #if defined(lint) /* ARGSUSED */ void itlb_rd_entry(uint_t entry, tte_t *tte, uint64_t *va_tag) {} #else /* lint */ ENTRY_NP(itlb_rd_entry) sllx %o0, 3, %o0 ldxa [%o0]ASI_ITLB_ACCESS, %g1 stx %g1, [%o1] ldxa [%o0]ASI_ITLB_TAGREAD, %g2 set TAGREAD_CTX_MASK, %o4 andn %g2, %o4, %o5 retl stx %o5, [%o2] SET_SIZE(itlb_rd_entry) #endif /* lint */ #if defined(lint) /* ARGSUSED */ void dtlb_rd_entry(uint_t entry, tte_t *tte, uint64_t *va_tag) {} #else /* lint */ ENTRY_NP(dtlb_rd_entry) sllx %o0, 3, %o0 ldxa [%o0]ASI_DTLB_ACCESS, %g1 stx %g1, [%o1] ldxa [%o0]ASI_DTLB_TAGREAD, %g2 set TAGREAD_CTX_MASK, %o4 andn %g2, %o4, %o5 retl stx %o5, [%o2] SET_SIZE(dtlb_rd_entry) #endif /* lint */ #if !(defined(JALAPENO) || defined(SERRANO)) #if defined(lint) uint64_t get_safari_config(void) { return (0); } #else /* lint */ ENTRY(get_safari_config) ldxa [%g0]ASI_SAFARI_CONFIG, %o0 retl nop SET_SIZE(get_safari_config) #endif /* lint */ #if defined(lint) /* ARGSUSED */ void set_safari_config(uint64_t safari_config) {} #else /* lint */ ENTRY(set_safari_config) stxa %o0, [%g0]ASI_SAFARI_CONFIG membar #Sync retl nop SET_SIZE(set_safari_config) #endif /* lint */ #endif /* !(JALAPENO || SERRANO) */ #if defined(lint) void cpu_cleartickpnt(void) {} #else /* lint */ /* * Clear the NPT (non-privileged trap) bit in the %tick/%stick * registers. In an effort to make the change in the * tick/stick counter as consistent as possible, we disable * all interrupts while we're changing the registers. We also * ensure that the read and write instructions are in the same * line in the instruction cache. */ ENTRY_NP(cpu_clearticknpt) rdpr %pstate, %g1 /* save processor state */ andn %g1, PSTATE_IE, %g3 /* turn off */ wrpr %g0, %g3, %pstate /* interrupts */ rdpr %tick, %g2 /* get tick register */ brgez,pn %g2, 1f /* if NPT bit off, we're done */ mov 1, %g3 /* create mask */ sllx %g3, 63, %g3 /* for NPT bit */ ba,a,pt %xcc, 2f .align 8 /* Ensure rd/wr in same i$ line */ 2: rdpr %tick, %g2 /* get tick register */ wrpr %g3, %g2, %tick /* write tick register, */ /* clearing NPT bit */ 1: rd STICK, %g2 /* get stick register */ brgez,pn %g2, 3f /* if NPT bit off, we're done */ mov 1, %g3 /* create mask */ sllx %g3, 63, %g3 /* for NPT bit */ ba,a,pt %xcc, 4f .align 8 /* Ensure rd/wr in same i$ line */ 4: rd STICK, %g2 /* get stick register */ wr %g3, %g2, STICK /* write stick register, */ /* clearing NPT bit */ 3: jmp %g4 + 4 wrpr %g0, %g1, %pstate /* restore processor state */ SET_SIZE(cpu_clearticknpt) #endif /* lint */ #if defined(CPU_IMP_L1_CACHE_PARITY) #if defined(lint) /* * correct_dcache_parity(size_t size, size_t linesize) * * Correct D$ data parity by zeroing the data and initializing microtag * for all indexes and all ways of the D$. * */ /* ARGSUSED */ void correct_dcache_parity(size_t size, size_t linesize) {} #else /* lint */ ENTRY(correct_dcache_parity) /* * Register Usage: * * %o0 = input D$ size * %o1 = input D$ line size * %o2 = scratch * %o3 = scratch * %o4 = scratch */ sub %o0, %o1, %o0 ! init cache line address /* * For Panther CPUs, we also need to clear the data parity bits * using DC_data_parity bit of the ASI_DCACHE_DATA register. */ GET_CPU_IMPL(%o3) cmp %o3, PANTHER_IMPL bne 1f clr %o3 ! zero for non-Panther mov 1, %o3 sll %o3, PN_DC_DATA_PARITY_BIT_SHIFT, %o3 1: /* * Set utag = way since it must be unique within an index. */ srl %o0, 14, %o2 ! get cache way (DC_way) membar #Sync ! required before ASI_DC_UTAG stxa %o2, [%o0]ASI_DC_UTAG ! set D$ utag = cache way membar #Sync ! required after ASI_DC_UTAG /* * Zero line of D$ data (and data parity bits for Panther) */ sub %o1, 8, %o2 or %o0, %o3, %o4 ! same address + DC_data_parity 2: membar #Sync ! required before ASI_DC_DATA stxa %g0, [%o0 + %o2]ASI_DC_DATA ! zero 8 bytes of D$ data membar #Sync ! required after ASI_DC_DATA /* * We also clear the parity bits if this is a panther. For non-Panther * CPUs, we simply end up clearing the $data register twice. */ stxa %g0, [%o4 + %o2]ASI_DC_DATA membar #Sync subcc %o2, 8, %o2 bge 2b nop subcc %o0, %o1, %o0 bge 1b nop retl nop SET_SIZE(correct_dcache_parity) #endif /* lint */ #endif /* CPU_IMP_L1_CACHE_PARITY */ #if defined(lint) /* * Get timestamp (stick). */ /* ARGSUSED */ void stick_timestamp(int64_t *ts) { } #else /* lint */ ENTRY_NP(stick_timestamp) rd STICK, %g1 ! read stick reg sllx %g1, 1, %g1 srlx %g1, 1, %g1 ! clear npt bit retl stx %g1, [%o0] ! store the timestamp SET_SIZE(stick_timestamp) #endif /* lint */ #if defined(lint) /* * Set STICK adjusted by skew. */ /* ARGSUSED */ void stick_adj(int64_t skew) { } #else /* lint */ ENTRY_NP(stick_adj) rdpr %pstate, %g1 ! save processor state andn %g1, PSTATE_IE, %g3 ba 1f ! cache align stick adj wrpr %g0, %g3, %pstate ! turn off interrupts .align 16 1: nop rd STICK, %g4 ! read stick reg add %g4, %o0, %o1 ! adjust stick with skew wr %o1, %g0, STICK ! write stick reg retl wrpr %g1, %pstate ! restore processor state SET_SIZE(stick_adj) #endif /* lint */ #if defined(lint) /* * Debugger-specific stick retrieval */ /*ARGSUSED*/ int kdi_get_stick(uint64_t *stickp) { return (0); } #else /* lint */ ENTRY_NP(kdi_get_stick) rd STICK, %g1 stx %g1, [%o0] retl mov %g0, %o0 SET_SIZE(kdi_get_stick) #endif /* lint */ #if defined(lint) /* * Invalidate the specified line from the D$. * * Register usage: * %o0 - index for the invalidation, specifies DC_way and DC_addr * * ASI_DC_TAG, 0x47, is used in the following manner. A 64-bit value is * stored to a particular DC_way and DC_addr in ASI_DC_TAG. * * The format of the stored 64-bit value is: * * +----------+--------+----------+ * | Reserved | DC_tag | DC_valid | * +----------+--------+----------+ * 63 31 30 1 0 * * DC_tag is the 30-bit physical tag of the associated line. * DC_valid is the 1-bit valid field for both the physical and snoop tags. * * The format of the 64-bit DC_way and DC_addr into ASI_DC_TAG is: * * +----------+--------+----------+----------+ * | Reserved | DC_way | DC_addr | Reserved | * +----------+--------+----------+----------+ * 63 16 15 14 13 5 4 0 * * DC_way is a 2-bit index that selects one of the 4 ways. * DC_addr is a 9-bit index that selects one of 512 tag/valid fields. * * Setting the DC_valid bit to zero for the specified DC_way and * DC_addr index into the D$ results in an invalidation of a D$ line. */ /*ARGSUSED*/ void dcache_inval_line(int index) { } #else /* lint */ ENTRY(dcache_inval_line) sll %o0, 5, %o0 ! shift index into DC_way and DC_addr stxa %g0, [%o0]ASI_DC_TAG ! zero the DC_valid and DC_tag bits membar #Sync retl nop SET_SIZE(dcache_inval_line) #endif /* lint */ #if defined(lint) /* * Invalidate the entire I$ * * Register usage: * %o0 - specifies IC_way, IC_addr, IC_tag * %o1 - scratch * %o2 - used to save and restore DCU value * %o3 - scratch * %o5 - used to save and restore PSTATE * * Due to the behavior of the I$ control logic when accessing ASI_IC_TAG, * the I$ should be turned off. Accesses to ASI_IC_TAG may collide and * block out snoops and invalidates to the I$, causing I$ consistency * to be broken. Before turning on the I$, all I$ lines must be invalidated. * * ASI_IC_TAG, 0x67, is used in the following manner. A 64-bit value is * stored to a particular IC_way, IC_addr, IC_tag in ASI_IC_TAG. The * info below describes store (write) use of ASI_IC_TAG. Note that read * use of ASI_IC_TAG behaves differently. * * The format of the stored 64-bit value is: * * +----------+--------+---------------+-----------+ * | Reserved | Valid | IC_vpred<7:0> | Undefined | * +----------+--------+---------------+-----------+ * 63 55 54 53 46 45 0 * * Valid is the 1-bit valid field for both the physical and snoop tags. * IC_vpred is the 8-bit LPB bits for 8 instructions starting at * the 32-byte boundary aligned address specified by IC_addr. * * The format of the 64-bit IC_way, IC_addr, IC_tag into ASI_IC_TAG is: * * +----------+--------+---------+--------+---------+ * | Reserved | IC_way | IC_addr | IC_tag |Reserved | * +----------+--------+---------+--------+---------+ * 63 16 15 14 13 5 4 3 2 0 * * IC_way is a 2-bit index that selects one of the 4 ways. * IC_addr[13:6] is an 8-bit index that selects one of 256 valid fields. * IC_addr[5] is a "don't care" for a store. * IC_tag set to 2 specifies that the stored value is to be interpreted * as containing Valid and IC_vpred as described above. * * Setting the Valid bit to zero for the specified IC_way and * IC_addr index into the I$ results in an invalidation of an I$ line. */ /*ARGSUSED*/ void icache_inval_all(void) { } #else /* lint */ ENTRY(icache_inval_all) rdpr %pstate, %o5 andn %o5, PSTATE_IE, %o3 wrpr %g0, %o3, %pstate ! clear IE bit GET_CPU_PRIVATE_PTR(%g0, %o0, %o2, icache_inval_all_1); ld [%o0 + CHPR_ICACHE_LINESIZE], %o1 ba,pt %icc, 2f ld [%o0 + CHPR_ICACHE_SIZE], %o0 icache_inval_all_1: ASM_LD(%o0, icache_size) ASM_LD(%o1, icache_linesize) 2: CH_ICACHE_FLUSHALL(%o0, %o1, %o2, %o4) retl wrpr %g0, %o5, %pstate ! restore earlier pstate SET_SIZE(icache_inval_all) #endif /* lint */ #if defined(lint) /* ARGSUSED */ void cache_scrubreq_tl1(uint64_t inum, uint64_t index) { } #else /* lint */ /* * cache_scrubreq_tl1 is the crosstrap handler called on offlined cpus via a * crosstrap. It atomically increments the outstanding request counter and, * if there was not already an outstanding request, branches to setsoftint_tl1 * to enqueue an intr_vec for the given inum. */ ! Register usage: ! ! Arguments: ! %g1 - inum ! %g2 - index into chsm_outstanding array ! ! Internal: ! %g2, %g3, %g5 - scratch ! %g4 - ptr. to scrub_misc chsm_outstanding[index]. ! %g6 - setsoftint_tl1 address ENTRY_NP(cache_scrubreq_tl1) mulx %g2, CHSM_OUTSTANDING_INCR, %g2 set CHPR_SCRUB_MISC + CHSM_OUTSTANDING, %g3 add %g2, %g3, %g2 GET_CPU_PRIVATE_PTR(%g2, %g4, %g5, 1f); ld [%g4], %g2 ! cpu's chsm_outstanding[index] ! ! no need to use atomic instructions for the following ! increment - we're at tl1 ! add %g2, 0x1, %g3 brnz,pn %g2, 1f ! no need to enqueue more intr_vec st %g3, [%g4] ! delay - store incremented counter ASM_JMP(%g6, setsoftint_tl1) ! not reached 1: retry SET_SIZE(cache_scrubreq_tl1) #endif /* lint */ #if defined(lint) /* ARGSUSED */ void get_cpu_error_state(ch_cpu_errors_t *cpu_error_regs) {} #else /* lint */ /* * Get the error state for the processor. * Note that this must not be used at TL>0 */ ENTRY(get_cpu_error_state) #if defined(CHEETAH_PLUS) set ASI_SHADOW_REG_VA, %o2 ldxa [%o2]ASI_AFSR, %o1 ! shadow afsr reg stx %o1, [%o0 + CH_CPU_ERRORS_SHADOW_AFSR] ldxa [%o2]ASI_AFAR, %o1 ! shadow afar reg stx %o1, [%o0 + CH_CPU_ERRORS_SHADOW_AFAR] GET_CPU_IMPL(%o3) ! Only panther has AFSR_EXT registers cmp %o3, PANTHER_IMPL bne,a 1f stx %g0, [%o0 + CH_CPU_ERRORS_AFSR_EXT] ! zero for non-PN set ASI_AFSR_EXT_VA, %o2 ldxa [%o2]ASI_AFSR, %o1 ! afsr_ext reg stx %o1, [%o0 + CH_CPU_ERRORS_AFSR_EXT] set ASI_SHADOW_AFSR_EXT_VA, %o2 ldxa [%o2]ASI_AFSR, %o1 ! shadow afsr_ext reg stx %o1, [%o0 + CH_CPU_ERRORS_SHADOW_AFSR_EXT] b 2f nop 1: stx %g0, [%o0 + CH_CPU_ERRORS_SHADOW_AFSR_EXT] ! zero for non-PN 2: #else /* CHEETAH_PLUS */ stx %g0, [%o0 + CH_CPU_ERRORS_SHADOW_AFSR] stx %g0, [%o0 + CH_CPU_ERRORS_SHADOW_AFAR] stx %g0, [%o0 + CH_CPU_ERRORS_AFSR_EXT] stx %g0, [%o0 + CH_CPU_ERRORS_SHADOW_AFSR_EXT] #endif /* CHEETAH_PLUS */ #if defined(SERRANO) /* * Serrano has an afar2 which captures the address on FRC/FRU errors. * We save this in the afar2 of the register save area. */ set ASI_MCU_AFAR2_VA, %o2 ldxa [%o2]ASI_MCU_CTRL, %o1 stx %o1, [%o0 + CH_CPU_ERRORS_AFAR2] #endif /* SERRANO */ ldxa [%g0]ASI_AFSR, %o1 ! primary afsr reg stx %o1, [%o0 + CH_CPU_ERRORS_AFSR] ldxa [%g0]ASI_AFAR, %o1 ! primary afar reg retl stx %o1, [%o0 + CH_CPU_ERRORS_AFAR] SET_SIZE(get_cpu_error_state) #endif /* lint */ #if defined(lint) /* * Check a page of memory for errors. * * Load each 64 byte block from physical memory. * Check AFSR after each load to see if an error * was caused. If so, log/scrub that error. * * Used to determine if a page contains * CEs when CEEN is disabled. */ /*ARGSUSED*/ void cpu_check_block(caddr_t va, uint_t psz) {} #else /* lint */ ENTRY(cpu_check_block) ! ! get a new window with room for the error regs ! save %sp, -SA(MINFRAME + CH_CPU_ERROR_SIZE), %sp srl %i1, 6, %l4 ! clear top bits of psz ! and divide by 64 rd %fprs, %l2 ! store FP wr %g0, FPRS_FEF, %fprs ! enable FP 1: ldda [%i0]ASI_BLK_P, %d0 ! load a block membar #Sync ldxa [%g0]ASI_AFSR, %l3 ! read afsr reg brz,a,pt %l3, 2f ! check for error nop ! ! if error, read the error regs and log it ! call get_cpu_error_state add %fp, STACK_BIAS - CH_CPU_ERROR_SIZE, %o0 ! ! cpu_ce_detected(ch_cpu_errors_t *, flag) ! call cpu_ce_detected ! log the error mov CE_CEEN_TIMEOUT, %o1 2: dec %l4 ! next 64-byte block brnz,a,pt %l4, 1b add %i0, 64, %i0 ! increment block addr wr %l2, %g0, %fprs ! restore FP ret restore SET_SIZE(cpu_check_block) #endif /* lint */ #if defined(lint) /* * Perform a cpu logout called from C. This is used where we did not trap * for the error but still want to gather "what we can". Caller must make * sure cpu private area exists and that the indicated logout area is free * for use, and that we are unable to migrate cpus. */ /*ARGSUSED*/ void cpu_delayed_logout(uint64_t afar, ch_cpu_logout_t *clop) { } #else ENTRY(cpu_delayed_logout) rdpr %pstate, %o2 andn %o2, PSTATE_IE, %o2 wrpr %g0, %o2, %pstate ! disable interrupts PARK_SIBLING_CORE(%o2, %o3, %o4) ! %o2 has DCU value add %o1, CH_CLO_DATA + CH_CHD_EC_DATA, %o1 rd %asi, %g1 wr %g0, ASI_P, %asi GET_ECACHE_DTAGS(%o0, %o1, %o3, %o4, %o5) wr %g1, %asi UNPARK_SIBLING_CORE(%o2, %o3, %o4) ! can use %o2 again rdpr %pstate, %o2 or %o2, PSTATE_IE, %o2 wrpr %g0, %o2, %pstate retl nop SET_SIZE(cpu_delayed_logout) #endif /* lint */ #if defined(lint) /*ARGSUSED*/ int dtrace_blksuword32(uintptr_t addr, uint32_t *data, int tryagain) { return (0); } #else ENTRY(dtrace_blksuword32) save %sp, -SA(MINFRAME + 4), %sp rdpr %pstate, %l1 andn %l1, PSTATE_IE, %l2 ! disable interrupts to wrpr %g0, %l2, %pstate ! protect our FPU diddling rd %fprs, %l0 andcc %l0, FPRS_FEF, %g0 bz,a,pt %xcc, 1f ! if the fpu is disabled wr %g0, FPRS_FEF, %fprs ! ... enable the fpu st %f0, [%fp + STACK_BIAS - 4] ! save %f0 to the stack 1: set 0f, %l5 /* * We're about to write a block full or either total garbage * (not kernel data, don't worry) or user floating-point data * (so it only _looks_ like garbage). */ ld [%i1], %f0 ! modify the block membar #Sync stn %l5, [THREAD_REG + T_LOFAULT] ! set up the lofault handler stda %d0, [%i0]ASI_BLK_COMMIT_S ! store the modified block membar #Sync stn %g0, [THREAD_REG + T_LOFAULT] ! remove the lofault handler bz,a,pt %xcc, 1f wr %g0, %l0, %fprs ! restore %fprs ld [%fp + STACK_BIAS - 4], %f0 ! restore %f0 1: wrpr %g0, %l1, %pstate ! restore interrupts ret restore %g0, %g0, %o0 0: membar #Sync stn %g0, [THREAD_REG + T_LOFAULT] ! remove the lofault handler bz,a,pt %xcc, 1f wr %g0, %l0, %fprs ! restore %fprs ld [%fp + STACK_BIAS - 4], %f0 ! restore %f0 1: wrpr %g0, %l1, %pstate ! restore interrupts /* * If tryagain is set (%i2) we tail-call dtrace_blksuword32_err() * which deals with watchpoints. Otherwise, just return -1. */ brnz,pt %i2, 1f nop ret restore %g0, -1, %o0 1: call dtrace_blksuword32_err restore SET_SIZE(dtrace_blksuword32) #endif /* lint */ #ifdef CHEETAHPLUS_ERRATUM_25 #if defined(lint) /* * Claim a chunk of physical address space. */ /*ARGSUSED*/ void claimlines(uint64_t pa, size_t sz, int stride) {} #else /* lint */ ENTRY(claimlines) 1: subcc %o1, %o2, %o1 add %o0, %o1, %o3 bgeu,a,pt %xcc, 1b casxa [%o3]ASI_MEM, %g0, %g0 membar #Sync retl nop SET_SIZE(claimlines) #endif /* lint */ #if defined(lint) /* * CPU feature initialization, * turn BPE off, * get device id. */ /*ARGSUSED*/ void cpu_feature_init(void) {} #else /* lint */ ENTRY(cpu_feature_init) save %sp, -SA(MINFRAME), %sp sethi %hi(cheetah_bpe_off), %o0 ld [%o0 + %lo(cheetah_bpe_off)], %o0 brz %o0, 1f nop rd ASR_DISPATCH_CONTROL, %o0 andn %o0, ASR_DISPATCH_CONTROL_BPE, %o0 wr %o0, 0, ASR_DISPATCH_CONTROL 1: ! ! get the device_id and store the device_id ! in the appropriate cpunodes structure ! given the cpus index ! CPU_INDEX(%o0, %o1) mulx %o0, CPU_NODE_SIZE, %o0 set cpunodes + DEVICE_ID, %o1 ldxa [%g0] ASI_DEVICE_SERIAL_ID, %o2 stx %o2, [%o0 + %o1] #ifdef CHEETAHPLUS_ERRATUM_34 ! ! apply Cheetah+ erratum 34 workaround ! call itlb_erratum34_fixup nop call dtlb_erratum34_fixup nop #endif /* CHEETAHPLUS_ERRATUM_34 */ ret restore SET_SIZE(cpu_feature_init) #endif /* lint */ #if defined(lint) /* * Copy a tsb entry atomically, from src to dest. * src must be 128 bit aligned. */ /*ARGSUSED*/ void copy_tsb_entry(uintptr_t src, uintptr_t dest) {} #else /* lint */ ENTRY(copy_tsb_entry) ldda [%o0]ASI_NQUAD_LD, %o2 ! %o2 = tag, %o3 = data stx %o2, [%o1] stx %o3, [%o1 + 8 ] retl nop SET_SIZE(copy_tsb_entry) #endif /* lint */ #endif /* CHEETAHPLUS_ERRATUM_25 */ #ifdef CHEETAHPLUS_ERRATUM_34 #if defined(lint) /*ARGSUSED*/ void itlb_erratum34_fixup(void) {} #else /* lint */ ! ! In Cheetah+ erratum 34, under certain conditions an ITLB locked ! index 0 TTE will erroneously be displaced when a new TTE is ! loaded via ASI_ITLB_IN. In order to avoid cheetah+ erratum 34, ! locked index 0 TTEs must be relocated. ! ! NOTE: Care must be taken to avoid an ITLB miss in this routine. ! ENTRY_NP(itlb_erratum34_fixup) rdpr %pstate, %o3 #ifdef DEBUG PANIC_IF_INTR_DISABLED_PSTR(%o3, u3_di_label1, %g1) #endif /* DEBUG */ wrpr %o3, PSTATE_IE, %pstate ! Disable interrupts ldxa [%g0]ASI_ITLB_ACCESS, %o1 ! %o1 = entry 0 data ldxa [%g0]ASI_ITLB_TAGREAD, %o2 ! %o2 = entry 0 tag cmp %o1, %g0 ! Is this entry valid? bge %xcc, 1f andcc %o1, TTE_LCK_INT, %g0 ! Is this entry locked? bnz %icc, 2f nop 1: retl ! Nope, outta here... wrpr %g0, %o3, %pstate ! Enable interrupts 2: sethi %hi(FLUSH_ADDR), %o4 stxa %g0, [%o2]ASI_ITLB_DEMAP ! Flush this mapping flush %o4 ! Flush required for I-MMU ! ! Start search from index 1 up. This is because the kernel force ! loads its text page at index 15 in sfmmu_kernel_remap() and we ! don't want our relocated entry evicted later. ! ! NOTE: We assume that we'll be successful in finding an unlocked ! or invalid entry. If that isn't the case there are bound to ! bigger problems. ! set (1 << 3), %g3 3: ldxa [%g3]ASI_ITLB_ACCESS, %o4 ! Load TTE from t16 ! ! If this entry isn't valid, we'll choose to displace it (regardless ! of the lock bit). ! cmp %o4, %g0 ! TTE is > 0 iff not valid bge %xcc, 4f ! If invalid, go displace andcc %o4, TTE_LCK_INT, %g0 ! Check for lock bit bnz,a %icc, 3b ! If locked, look at next add %g3, (1 << 3), %g3 ! entry 4: ! ! We found an unlocked or invalid entry; we'll explicitly load ! the former index 0 entry here. ! sethi %hi(FLUSH_ADDR), %o4 set MMU_TAG_ACCESS, %g4 stxa %o2, [%g4]ASI_IMMU stxa %o1, [%g3]ASI_ITLB_ACCESS flush %o4 ! Flush required for I-MMU retl wrpr %g0, %o3, %pstate ! Enable interrupts SET_SIZE(itlb_erratum34_fixup) #endif /* lint */ #if defined(lint) /*ARGSUSED*/ void dtlb_erratum34_fixup(void) {} #else /* lint */ ! ! In Cheetah+ erratum 34, under certain conditions a DTLB locked ! index 0 TTE will erroneously be displaced when a new TTE is ! loaded. In order to avoid cheetah+ erratum 34, locked index 0 ! TTEs must be relocated. ! ENTRY_NP(dtlb_erratum34_fixup) rdpr %pstate, %o3 #ifdef DEBUG PANIC_IF_INTR_DISABLED_PSTR(%o3, u3_di_label2, %g1) #endif /* DEBUG */ wrpr %o3, PSTATE_IE, %pstate ! Disable interrupts ldxa [%g0]ASI_DTLB_ACCESS, %o1 ! %o1 = entry 0 data ldxa [%g0]ASI_DTLB_TAGREAD, %o2 ! %o2 = entry 0 tag cmp %o1, %g0 ! Is this entry valid? bge %xcc, 1f andcc %o1, TTE_LCK_INT, %g0 ! Is this entry locked? bnz %icc, 2f nop 1: retl ! Nope, outta here... wrpr %g0, %o3, %pstate ! Enable interrupts 2: stxa %g0, [%o2]ASI_DTLB_DEMAP ! Flush this mapping membar #Sync ! ! Start search from index 1 up. ! ! NOTE: We assume that we'll be successful in finding an unlocked ! or invalid entry. If that isn't the case there are bound to ! bigger problems. ! set (1 << 3), %g3 3: ldxa [%g3]ASI_DTLB_ACCESS, %o4 ! Load TTE from t16 ! ! If this entry isn't valid, we'll choose to displace it (regardless ! of the lock bit). ! cmp %o4, %g0 ! TTE is > 0 iff not valid bge %xcc, 4f ! If invalid, go displace andcc %o4, TTE_LCK_INT, %g0 ! Check for lock bit bnz,a %icc, 3b ! If locked, look at next add %g3, (1 << 3), %g3 ! entry 4: ! ! We found an unlocked or invalid entry; we'll explicitly load ! the former index 0 entry here. ! set MMU_TAG_ACCESS, %g4 stxa %o2, [%g4]ASI_DMMU stxa %o1, [%g3]ASI_DTLB_ACCESS membar #Sync retl wrpr %g0, %o3, %pstate ! Enable interrupts SET_SIZE(dtlb_erratum34_fixup) #endif /* lint */ #endif /* CHEETAHPLUS_ERRATUM_34 */