/****************************************************************************** * * Name: actbl2.h - ACPI Specification Revision 2.0 Tables * $Revision: 44 $ * *****************************************************************************/ /****************************************************************************** * * 1. Copyright Notice * * Some or all of this work - Copyright (c) 1999 - 2005, Intel Corp. * All rights reserved. * * 2. License * * 2.1. This is your license from Intel Corp. under its intellectual property * rights. You may have additional license terms from the party that provided * you this software, covering your right to use that party's intellectual * property rights. * * 2.2. Intel grants, free of charge, to any person ("Licensee") obtaining a * copy of the source code appearing in this file ("Covered Code") an * irrevocable, perpetual, worldwide license under Intel's copyrights in the * base code distributed originally by Intel ("Original Intel Code") to copy, * make derivatives, distribute, use and display any portion of the Covered * Code in any form, with the right to sublicense such rights; and * * 2.3. Intel grants Licensee a non-exclusive and non-transferable patent * license (with the right to sublicense), under only those claims of Intel * patents that are infringed by the Original Intel Code, to make, use, sell, * offer to sell, and import the Covered Code and derivative works thereof * solely to the minimum extent necessary to exercise the above copyright * license, and in no event shall the patent license extend to any additions * to or modifications of the Original Intel Code. No other license or right * is granted directly or by implication, estoppel or otherwise; * * The above copyright and patent license is granted only if the following * conditions are met: * * 3. Conditions * * 3.1. Redistribution of Source with Rights to Further Distribute Source. * Redistribution of source code of any substantial portion of the Covered * Code or modification with rights to further distribute source must include * the above Copyright Notice, the above License, this list of Conditions, * and the following Disclaimer and Export Compliance provision. In addition, * Licensee must cause all Covered Code to which Licensee contributes to * contain a file documenting the changes Licensee made to create that Covered * Code and the date of any change. Licensee must include in that file the * documentation of any changes made by any predecessor Licensee. Licensee * must include a prominent statement that the modification is derived, * directly or indirectly, from Original Intel Code. * * 3.2. Redistribution of Source with no Rights to Further Distribute Source. * Redistribution of source code of any substantial portion of the Covered * Code or modification without rights to further distribute source must * include the following Disclaimer and Export Compliance provision in the * documentation and/or other materials provided with distribution. In * addition, Licensee may not authorize further sublicense of source of any * portion of the Covered Code, and must include terms to the effect that the * license from Licensee to its licensee is limited to the intellectual * property embodied in the software Licensee provides to its licensee, and * not to intellectual property embodied in modifications its licensee may * make. * * 3.3. Redistribution of Executable. Redistribution in executable form of any * substantial portion of the Covered Code or modification must reproduce the * above Copyright Notice, and the following Disclaimer and Export Compliance * provision in the documentation and/or other materials provided with the * distribution. * * 3.4. Intel retains all right, title, and interest in and to the Original * Intel Code. * * 3.5. Neither the name Intel nor any other trademark owned or controlled by * Intel shall be used in advertising or otherwise to promote the sale, use or * other dealings in products derived from or relating to the Covered Code * without prior written authorization from Intel. * * 4. Disclaimer and Export Compliance * * 4.1. INTEL MAKES NO WARRANTY OF ANY KIND REGARDING ANY SOFTWARE PROVIDED * HERE. ANY SOFTWARE ORIGINATING FROM INTEL OR DERIVED FROM INTEL SOFTWARE * IS PROVIDED "AS IS," AND INTEL WILL NOT PROVIDE ANY SUPPORT, ASSISTANCE, * INSTALLATION, TRAINING OR OTHER SERVICES. INTEL WILL NOT PROVIDE ANY * UPDATES, ENHANCEMENTS OR EXTENSIONS. INTEL SPECIFICALLY DISCLAIMS ANY * IMPLIED WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT AND FITNESS FOR A * PARTICULAR PURPOSE. * * 4.2. IN NO EVENT SHALL INTEL HAVE ANY LIABILITY TO LICENSEE, ITS LICENSEES * OR ANY OTHER THIRD PARTY, FOR ANY LOST PROFITS, LOST DATA, LOSS OF USE OR * COSTS OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, OR FOR ANY INDIRECT, * SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THIS AGREEMENT, UNDER ANY * CAUSE OF ACTION OR THEORY OF LIABILITY, AND IRRESPECTIVE OF WHETHER INTEL * HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES. THESE LIMITATIONS * SHALL APPLY NOTWITHSTANDING THE FAILURE OF THE ESSENTIAL PURPOSE OF ANY * LIMITED REMEDY. * * 4.3. Licensee shall not export, either directly or indirectly, any of this * software or system incorporating such software without first obtaining any * required license or other approval from the U. S. Department of Commerce or * any other agency or department of the United States Government. In the * event Licensee exports any such software from the United States or * re-exports any such software from a foreign destination, Licensee shall * ensure that the distribution and export/re-export of the software is in * compliance with all laws, regulations, orders, or other restrictions of the * U.S. Export Administration Regulations. Licensee agrees that neither it nor * any of its subsidiaries will export/re-export any technical data, process, * software, or service, directly or indirectly, to any country for which the * United States government or any agency thereof requires an export license, * other governmental approval, or letter of assurance, without first obtaining * such license, approval or letter. * *****************************************************************************/ #ifndef __ACTBL2_H__ #define __ACTBL2_H__ /* * Prefered Power Management Profiles */ #define PM_UNSPECIFIED 0 #define PM_DESKTOP 1 #define PM_MOBILE 2 #define PM_WORKSTATION 3 #define PM_ENTERPRISE_SERVER 4 #define PM_SOHO_SERVER 5 #define PM_APPLIANCE_PC 6 /* * ACPI Boot Arch Flags */ #define BAF_LEGACY_DEVICES 0x0001 #define BAF_8042_KEYBOARD_CONTROLLER 0x0002 #define FADT2_REVISION_ID 3 #define FADT2_MINUS_REVISION_ID 2 #pragma pack(1) /* * ACPI 2.0 Root System Description Table (RSDT) */ typedef struct rsdt_descriptor_rev2 { ACPI_TABLE_HEADER_DEF /* ACPI common table header */ UINT32 TableOffsetEntry[1]; /* Array of pointers to ACPI tables */ } RSDT_DESCRIPTOR_REV2; /* * ACPI 2.0 Extended System Description Table (XSDT) */ typedef struct xsdt_descriptor_rev2 { ACPI_TABLE_HEADER_DEF /* ACPI common table header */ UINT64 TableOffsetEntry[1]; /* Array of pointers to ACPI tables */ } XSDT_DESCRIPTOR_REV2; /* * ACPI 2.0 Firmware ACPI Control Structure (FACS) */ typedef struct facs_descriptor_rev2 { char Signature[4]; /* ASCII table signature */ UINT32 Length; /* Length of structure, in bytes */ UINT32 HardwareSignature; /* Hardware configuration signature */ UINT32 FirmwareWakingVector; /* 32-bit physical address of the Firmware Waking Vector. */ UINT32 GlobalLock; /* Global Lock used to synchronize access to shared hardware resources */ /* Flags (32 bits) */ UINT8_BIT S4Bios_f : 1; /* 00: S4BIOS support is present */ UINT8_BIT : 7; /* 01-07: Reserved, must be zero */ UINT8 Reserved1[3]; /* 08-31: Reserved, must be zero */ UINT64 XFirmwareWakingVector; /* 64-bit physical address of the Firmware Waking Vector. */ UINT8 Version; /* Version of this table */ UINT8 Reserved3[31]; /* Reserved, must be zero */ } FACS_DESCRIPTOR_REV2; /* * ACPI 2.0+ Generic Address Structure (GAS) */ typedef struct acpi_generic_address { UINT8 AddressSpaceId; /* Address space where struct or register exists. */ UINT8 RegisterBitWidth; /* Size in bits of given register */ UINT8 RegisterBitOffset; /* Bit offset within the register */ UINT8 AccessWidth; /* Minimum Access size (ACPI 3.0) */ UINT64 Address; /* 64-bit address of struct or register */ } ACPI_GENERIC_ADDRESS; #define FADT_REV2_COMMON \ UINT32 V1_FirmwareCtrl; /* 32-bit physical address of FACS */ \ UINT32 V1_Dsdt; /* 32-bit physical address of DSDT */ \ UINT8 Reserved1; /* System Interrupt Model isn't used in ACPI 2.0*/ \ UINT8 Prefer_PM_Profile; /* Conveys preferred power management profile to OSPM. */ \ UINT16 SciInt; /* System vector of SCI interrupt */ \ UINT32 SmiCmd; /* Port address of SMI command port */ \ UINT8 AcpiEnable; /* Value to write to smi_cmd to enable ACPI */ \ UINT8 AcpiDisable; /* Value to write to smi_cmd to disable ACPI */ \ UINT8 S4BiosReq; /* Value to write to SMI CMD to enter S4BIOS state */ \ UINT8 PstateCnt; /* Processor performance state control*/ \ UINT32 V1_Pm1aEvtBlk; /* Port address of Power Mgt 1a AcpiEvent Reg Blk */ \ UINT32 V1_Pm1bEvtBlk; /* Port address of Power Mgt 1b AcpiEvent Reg Blk */ \ UINT32 V1_Pm1aCntBlk; /* Port address of Power Mgt 1a Control Reg Blk */ \ UINT32 V1_Pm1bCntBlk; /* Port address of Power Mgt 1b Control Reg Blk */ \ UINT32 V1_Pm2CntBlk; /* Port address of Power Mgt 2 Control Reg Blk */ \ UINT32 V1_PmTmrBlk; /* Port address of Power Mgt Timer Ctrl Reg Blk */ \ UINT32 V1_Gpe0Blk; /* Port addr of General Purpose AcpiEvent 0 Reg Blk */ \ UINT32 V1_Gpe1Blk; /* Port addr of General Purpose AcpiEvent 1 Reg Blk */ \ UINT8 Pm1EvtLen; /* Byte Length of ports at pm1X_evt_blk */ \ UINT8 Pm1CntLen; /* Byte Length of ports at pm1X_cnt_blk */ \ UINT8 Pm2CntLen; /* Byte Length of ports at pm2_cnt_blk */ \ UINT8 PmTmLen; /* Byte Length of ports at pm_tm_blk */ \ UINT8 Gpe0BlkLen; /* Byte Length of ports at gpe0_blk */ \ UINT8 Gpe1BlkLen; /* Byte Length of ports at gpe1_blk */ \ UINT8 Gpe1Base; /* Offset in gpe model where gpe1 events start */ \ UINT8 CstCnt; /* Support for the _CST object and C States change notification.*/ \ UINT16 Plvl2Lat; /* Worst case HW latency to enter/exit C2 state */ \ UINT16 Plvl3Lat; /* Worst case HW latency to enter/exit C3 state */ \ UINT16 FlushSize; /* Number of flush strides that need to be read */ \ UINT16 FlushStride; /* Processor's memory cache line width, in bytes */ \ UINT8 DutyOffset; /* Processor's duty cycle index in processor's P_CNT reg*/ \ UINT8 DutyWidth; /* Processor's duty cycle value bit width in P_CNT register.*/ \ UINT8 DayAlrm; /* Index to day-of-month alarm in RTC CMOS RAM */ \ UINT8 MonAlrm; /* Index to month-of-year alarm in RTC CMOS RAM */ \ UINT8 Century; /* Index to century in RTC CMOS RAM */ \ UINT16 IapcBootArch; /* IA-PC Boot Architecture Flags. See Table 5-10 for description*/ /* * ACPI 2.0+ Fixed ACPI Description Table (FADT) */ typedef struct fadt_descriptor_rev2 { ACPI_TABLE_HEADER_DEF /* ACPI common table header */ FADT_REV2_COMMON UINT8 Reserved2; /* Reserved, must be zero */ /* Flags (32 bits) */ UINT8_BIT WbInvd : 1; /* 00: The wbinvd instruction works properly */ UINT8_BIT WbInvdFlush : 1; /* 01: The wbinvd flushes but does not invalidate */ UINT8_BIT ProcC1 : 1; /* 02: All processors support C1 state */ UINT8_BIT Plvl2Up : 1; /* 03: C2 state works on MP system */ UINT8_BIT PwrButton : 1; /* 04: Power button is handled as a generic feature */ UINT8_BIT SleepButton : 1; /* 05: Sleep button is handled as a generic feature, or not present */ UINT8_BIT FixedRTC : 1; /* 06: RTC wakeup stat not in fixed register space */ UINT8_BIT Rtcs4 : 1; /* 07: RTC wakeup stat not possible from S4 */ UINT8_BIT TmrValExt : 1; /* 08: tmr_val is 32 bits 0=24-bits */ UINT8_BIT DockCap : 1; /* 09: Docking supported */ UINT8_BIT ResetRegSup : 1; /* 10: System reset via the FADT RESET_REG supported */ UINT8_BIT SealedCase : 1; /* 11: No internal expansion capabilities and case is sealed */ UINT8_BIT Headless : 1; /* 12: No local video capabilities or local input devices */ UINT8_BIT CpuSwSleep : 1; /* 13: Must execute native instruction after writing SLP_TYPx register */ UINT8_BIT PciExpWak : 1; /* 14: System supports PCIEXP_WAKE (STS/EN) bits (ACPI 3.0) */ UINT8_BIT UsePlatformClock : 1; /* 15: OSPM should use platform-provided timer (ACPI 3.0) */ UINT8_BIT S4RtcStsValid : 1; /* 16: Contents of RTC_STS valid after S4 wake (ACPI 3.0) */ UINT8_BIT RemotePowerOnCapable : 1; /* 17: System is compatible with remote power on (ACPI 3.0) */ UINT8_BIT ForceApicClusterModel : 1; /* 18: All local APICs must use cluster model (ACPI 3.0) */ UINT8_BIT ForceApicPhysicalDestinationMode : 1; /* 19: All local xAPICs must use physical dest mode (ACPI 3.0) */ UINT8_BIT : 4; /* 20-23: Reserved, must be zero */ UINT8 Reserved3; /* 24-31: Reserved, must be zero */ ACPI_GENERIC_ADDRESS ResetRegister; /* Reset register address in GAS format */ UINT8 ResetValue; /* Value to write to the ResetRegister port to reset the system */ UINT8 Reserved4[3]; /* These three bytes must be zero */ UINT64 XFirmwareCtrl; /* 64-bit physical address of FACS */ UINT64 XDsdt; /* 64-bit physical address of DSDT */ ACPI_GENERIC_ADDRESS XPm1aEvtBlk; /* Extended Power Mgt 1a AcpiEvent Reg Blk address */ ACPI_GENERIC_ADDRESS XPm1bEvtBlk; /* Extended Power Mgt 1b AcpiEvent Reg Blk address */ ACPI_GENERIC_ADDRESS XPm1aCntBlk; /* Extended Power Mgt 1a Control Reg Blk address */ ACPI_GENERIC_ADDRESS XPm1bCntBlk; /* Extended Power Mgt 1b Control Reg Blk address */ ACPI_GENERIC_ADDRESS XPm2CntBlk; /* Extended Power Mgt 2 Control Reg Blk address */ ACPI_GENERIC_ADDRESS XPmTmrBlk; /* Extended Power Mgt Timer Ctrl Reg Blk address */ ACPI_GENERIC_ADDRESS XGpe0Blk; /* Extended General Purpose AcpiEvent 0 Reg Blk address */ ACPI_GENERIC_ADDRESS XGpe1Blk; /* Extended General Purpose AcpiEvent 1 Reg Blk address */ } FADT_DESCRIPTOR_REV2; /* "Down-revved" ACPI 2.0 FADT descriptor */ typedef struct fadt_descriptor_rev2_minus { ACPI_TABLE_HEADER_DEF /* ACPI common table header */ FADT_REV2_COMMON UINT8 Reserved2; /* Reserved, must be zero */ UINT32 Flags; ACPI_GENERIC_ADDRESS ResetRegister; /* Reset register address in GAS format */ UINT8 ResetValue; /* Value to write to the ResetRegister port to reset the system. */ UINT8 Reserved7[3]; /* Reserved, must be zero */ } FADT_DESCRIPTOR_REV2_MINUS; /* ECDT - Embedded Controller Boot Resources Table */ typedef struct ec_boot_resources { ACPI_TABLE_HEADER_DEF ACPI_GENERIC_ADDRESS EcControl; /* Address of EC command/status register */ ACPI_GENERIC_ADDRESS EcData; /* Address of EC data register */ UINT32 Uid; /* Unique ID - must be same as the EC _UID method */ UINT8 GpeBit; /* The GPE for the EC */ UINT8 EcId[1]; /* Full namepath of the EC in the ACPI namespace */ } EC_BOOT_RESOURCES; /* SRAT - System Resource Affinity Table */ typedef struct static_resource_alloc { UINT8 Type; UINT8 Length; UINT8 ProximityDomainLo; UINT8 ApicId; /* Flags (32 bits) */ UINT8_BIT Enabled :1; /* 00: Use affinity structure */ UINT8_BIT :7; /* 01-07: Reserved, must be zero */ UINT8 Reserved3[3]; /* 08-31: Reserved, must be zero */ UINT8 LocalSapicEid; UINT8 ProximityDomainHi[3]; UINT32 Reserved4; /* Reserved, must be zero */ } STATIC_RESOURCE_ALLOC; typedef struct memory_affinity { UINT8 Type; UINT8 Length; UINT32 ProximityDomain; UINT16 Reserved3; UINT64 BaseAddress; UINT64 AddressLength; UINT32 Reserved4; /* Flags (32 bits) */ UINT8_BIT Enabled :1; /* 00: Use affinity structure */ UINT8_BIT HotPluggable :1; /* 01: Memory region is hot pluggable */ UINT8_BIT NonVolatile :1; /* 02: Memory is non-volatile */ UINT8_BIT :5; /* 03-07: Reserved, must be zero */ UINT8 Reserved5[3]; /* 08-31: Reserved, must be zero */ UINT64 Reserved6; /* Reserved, must be zero */ } MEMORY_AFFINITY; typedef struct system_resource_affinity { ACPI_TABLE_HEADER_DEF UINT32 Reserved1; /* Must be value '1' */ UINT64 Reserved2; /* Reserved, must be zero */ } SYSTEM_RESOURCE_AFFINITY; /* SLIT - System Locality Distance Information Table */ typedef struct system_locality_info { ACPI_TABLE_HEADER_DEF UINT64 LocalityCount; UINT8 Entry[1][1]; } SYSTEM_LOCALITY_INFO; #pragma pack() #endif /* __ACTBL2_H__ */