/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2007 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #ifndef _SYS_APIC_APIC_H #define _SYS_APIC_APIC_H #pragma ident "%Z%%M% %I% %E% SMI" #include #ifdef __cplusplus extern "C" { #endif #include #define APIC_IO_ADDR 0xfec00000 #define APIC_LOCAL_ADDR 0xfee00000 #define APIC_IO_MEMLEN 0xf #define APIC_LOCAL_MEMLEN 0xfffff /* Local Unit ID register */ #define APIC_LID_REG 0x8 /* I/o Unit Version Register */ #define APIC_VERS_REG 0xc /* Task Priority register */ #define APIC_TASK_REG 0x20 /* EOI register */ #define APIC_EOI_REG 0x2c /* Remote Read register */ #define APIC_REMOTE_READ 0x30 /* Logical Destination register */ #define APIC_DEST_REG 0x34 /* Destination Format rgister */ #define APIC_FORMAT_REG 0x38 /* Spurious Interrupt Vector register */ #define APIC_SPUR_INT_REG 0x3c /* Error Status Register */ #define APIC_ERROR_STATUS 0xa0 /* Interrupt Command registers */ #define APIC_INT_CMD1 0xc0 #define APIC_INT_CMD2 0xc4 /* Timer Vector Table register */ #define APIC_LOCAL_TIMER 0xc8 /* Local Interrupt Vector registers */ #define APIC_PCINT_VECT 0xd0 #define APIC_INT_VECT0 0xd4 #define APIC_INT_VECT1 0xd8 #define APIC_ERR_VECT 0xdc /* IPL for performance counter interrupts */ #define APIC_PCINT_IPL 0xe #define APIC_LVT_MASK 0x10000 /* Mask bit (16) in LVT */ /* Initial Count register */ #define APIC_INIT_COUNT 0xe0 /* Current Count Register */ #define APIC_CURR_COUNT 0xe4 #define APIC_CURR_ADD 0x39 /* used for remote read command */ #define CURR_COUNT_OFFSET (sizeof (int32_t) * APIC_CURR_COUNT) /* Divider Configuration Register */ #define APIC_DIVIDE_REG 0xf8 /* IRR register */ #define APIC_IRR_REG 0x80 /* ISR register */ #define APIC_ISR_REG 0x40 #define APIC_IO_REG 0x0 #define APIC_IO_DATA 0x4 /* Bit offset of APIC ID in LID_REG, INT_CMD and in DEST_REG */ #define APIC_ID_BIT_OFFSET 24 #define APIC_ICR_ID_BIT_OFFSET 24 #define APIC_LDR_ID_BIT_OFFSET 24 /* * Choose between flat and clustered models by writing the following to the * FORMAT_REG. 82489 DX documentation seemed to suggest that writing 0 will * disable logical destination mode. * Does not seem to be in the docs for local APICs on the processors. */ #define APIC_FLAT_MODEL 0xFFFFFFFFUL #define APIC_CLUSTER_MODEL 0x0FFFFFFF /* * The commands which follow are window selectors written to APIC_IO_REG * before data can be read/written from/to APIC_IO_DATA */ #define APIC_ID_CMD 0x0 #define APIC_VERS_CMD 0x1 #define APIC_RDT_CMD 0x10 #define APIC_RDT_CMD2 0x11 #define APIC_INTEGRATED_VERS 0x10 /* 0x10 & above indicates integrated */ #define IOAPIC_VER_82489DX 0x01 /* Version ID: 82489DX External APIC */ #define APIC_INT_SPURIOUS -1 #define APIC_IMCR_P1 0x22 /* int mode conf register port 1 */ #define APIC_IMCR_P2 0x23 /* int mode conf register port 2 */ #define APIC_IMCR_SELECT 0x70 /* select imcr by writing into P1 */ #define APIC_IMCR_PIC 0x0 /* selects PIC mode (8259-> BSP) */ #define APIC_IMCR_APIC 0x1 /* selects APIC mode (8259->APIC) */ #define APIC_CT_VECT 0x4ac /* conf table vector */ #define APIC_CT_SIZE 1024 /* conf table size */ #define APIC_ID 'MPAT' /* conf table signature */ /* * MP floating pointer structure defined in Intel MP Spec 1.1 */ struct apic_mpfps_hdr { uint32_t mpfps_sig; /* _MP_ (0x5F4D505F) */ uint32_t mpfps_mpct_paddr; /* paddr of MP configuration tbl */ uchar_t mpfps_length; /* in paragraph (16-bytes units) */ uchar_t mpfps_spec_rev; /* version number of MP spec */ uchar_t mpfps_checksum; /* checksum of complete structure */ uchar_t mpfps_featinfo1; /* mp feature info bytes 1 */ uchar_t mpfps_featinfo2; /* mp feature info bytes 2 */ uchar_t mpfps_featinfo3; /* mp feature info bytes 3 */ uchar_t mpfps_featinfo4; /* mp feature info bytes 4 */ uchar_t mpfps_featinfo5; /* mp feature info bytes 5 */ }; #define MPFPS_FEATINFO2_IMCRP 0x80 /* IMCRP presence bit */ #define APIC_MPS_OEM_ID_LEN 8 #define APIC_MPS_PROD_ID_LEN 12 struct apic_mp_cnf_hdr { uint_t mpcnf_sig; uint_t mpcnf_tbl_length: 16, mpcnf_spec: 8, mpcnf_cksum: 8; char mpcnf_oem_str[APIC_MPS_OEM_ID_LEN]; char mpcnf_prod_str[APIC_MPS_PROD_ID_LEN]; uint_t mpcnf_oem_ptr; uint_t mpcnf_oem_tbl_size: 16, mpcnf_entry_cnt: 16; uint_t mpcnf_local_apic; uint_t mpcnf_resv; }; struct apic_procent { uint_t proc_entry: 8, proc_apicid: 8, proc_version: 8, proc_cpuflags: 8; uint_t proc_stepping: 4, proc_model: 4, proc_family: 4, proc_type: 2, /* undocumented feature */ proc_resv1: 18; uint_t proc_feature; uint_t proc_resv2; uint_t proc_resv3; }; /* * proc_cpuflags definitions */ #define CPUFLAGS_EN 1 /* if not set, this processor is unusable */ #define CPUFLAGS_BP 2 /* set if this is the bootstrap processor */ struct apic_bus { uchar_t bus_entry; uchar_t bus_id; ushort_t bus_str1; uint_t bus_str2; }; struct apic_io_entry { uint_t io_entry: 8, io_apicid: 8, io_version: 8, io_flags: 8; uint_t io_apic_addr; }; #define IOAPIC_FLAGS_EN 0x01 /* this I/O apic is enable or not */ #define MAX_IO_APIC 32 /* maximum # of IOAPICs supported */ struct apic_io_intr { uint_t intr_entry: 8, intr_type: 8, intr_po: 2, intr_el: 2, intr_resv: 12; uint_t intr_busid: 8, intr_irq: 8, intr_destid: 8, intr_destintin: 8; }; /* * intr_type definitions */ #define IO_INTR_INT 0x00 #define IO_INTR_NMI 0x01 #define IO_INTR_SMI 0x02 #define IO_INTR_EXTINT 0x03 /* * destination APIC ID */ #define INTR_ALL_APIC 0xff /* local vector table */ #define AV_MASK 0x10000 /* interrupt command register 32-63 */ #define AV_TOALL 0x7fffffff #define AV_HIGH_ORDER 0x40000000 #define AV_IM_OFF 0x40000000 /* interrupt command register 0-31 */ #define AV_FIXED 0x000 #define AV_LOPRI 0x100 #define AV_REMOTE 0x300 #define AV_NMI 0x400 #define AV_RESET 0x500 #define AV_STARTUP 0x600 #define AV_EXTINT 0x700 #define AV_PDEST 0x000 #define AV_LDEST 0x800 /* IO & Local APIC Bit Definitions */ #define RDT_VECTOR(x) ((uchar_t)((x) & 0xFF)) #define AV_PENDING 0x1000 #define AV_ACTIVE_LOW 0x2000 /* only for integrated APIC */ #define AV_REMOTE_IRR 0x4000 /* IOAPIC RDT-specific */ #define AV_LEVEL 0x8000 #define AV_DEASSERT AV_LEVEL #define AV_ASSERT 0xc000 #define AV_READ_PENDING 0x10000 #define AV_REMOTE_STATUS 0x20000 /* 1 = valid, 0 = invalid */ #define AV_SH_SELF 0x40000 /* Short hand for self */ #define AV_SH_ALL_INCSELF 0x80000 /* All processors */ #define AV_SH_ALL_EXCSELF 0xc0000 /* All excluding self */ /* spurious interrupt vector register */ #define AV_UNIT_ENABLE 0x100 /* timer vector table */ #define AV_TIME 0x20000 /* Set timer mode to periodic */ #define APIC_MAXVAL 0xffffffffUL #define APIC_TIME_MIN 0x5000 #define APIC_TIME_COUNT 0x4000 /* * Range of the low byte value in apic_tick before starting calibration */ #define APIC_LB_MIN 0x60 #define APIC_LB_MAX 0xe0 #define APIC_MAX_VECTOR 255 #define APIC_RESV_VECT 0x00 #define APIC_RESV_IRQ 0xfe #define APIC_BASE_VECT 0x20 /* This will come in as interrupt 0 */ #define APIC_AVAIL_VECTOR (APIC_MAX_VECTOR+1-APIC_BASE_VECT) #define APIC_VECTOR_PER_IPL 0x10 /* # of vectors before PRI changes */ #define APIC_VECTOR(ipl) (apic_ipltopri[ipl] | APIC_RESV_VECT) #define APIC_VECTOR_MASK 0x0f #define APIC_HI_PRI_VECTS 2 /* vects reserved for hi pri reqs */ #define APIC_IPL_MASK 0xf0 #define APIC_IPL_SHIFT 4 /* >> to get ipl part of vector */ #define APIC_FIRST_FREE_IRQ 0x10 #define APIC_MAX_ISA_IRQ 15 #define APIC_IPL0 0x0f /* let IDLE_IPL be the lowest */ #define APIC_IDLE_IPL 0x00 #define APIC_MASK_ALL 0xf0 /* Mask all interrupts */ /* spurious interrupt vector */ #define APIC_SPUR_INTR 0xFF /* special or reserve vectors */ #define APIC_CHECK_RESERVE_VECTORS(v) \ ((v == T_FASTTRAP) || (v == APIC_SPUR_INTR) || (v == T_SYSCALLINT) || \ (v == T_DTRACE_RET) || (v == T_INT80)) /* cmos shutdown code for BIOS */ #define BIOS_SHUTDOWN 0x0a /* define the entry types for BIOS information tables as defined in PC+MP */ #define APIC_CPU_ENTRY 0 #define APIC_BUS_ENTRY 1 #define APIC_IO_ENTRY 2 #define APIC_IO_INTR_ENTRY 3 #define APIC_LOCAL_INTR_ENTRY 4 #define APIC_MPTBL_ADDR (639 * 1024) /* * The MP Floating Point structure could be in 1st 1KB of EBDA or last KB * of system base memory or in ROM between 0xF0000 and 0xFFFFF */ #define MPFPS_RAM_WIN_LEN 1024 #define MPFPS_ROM_WIN_START (uint32_t)0xf0000 #define MPFPS_ROM_WIN_LEN 0x10000 #define EISA_LEVEL_CNTL 0x4D0 /* definitions for apic_irq_table */ #define FREE_INDEX (short)-1 /* empty slot */ #define RESERVE_INDEX (short)-2 /* ipi, softintr, clkintr */ #define ACPI_INDEX (short)-3 /* ACPI */ #define MSI_INDEX (short)-4 /* MSI */ #define MSIX_INDEX (short)-5 /* MSI-X */ #define DEFAULT_INDEX (short)0x7FFF /* biggest positive no. to avoid conflict with actual index */ #define APIC_IS_MSI_OR_MSIX_INDEX(index) \ ((index) == MSI_INDEX || (index) == MSIX_INDEX) /* * definitions for MSI Address */ #define MSI_ADDR_HDR APIC_LOCAL_ADDR #define MSI_ADDR_DEST_SHIFT 12 /* Destination CPU's apic id */ #define MSI_ADDR_RH_FIXED 0x0 /* Redirection Hint Fixed */ #define MSI_ADDR_RH_LOPRI 0x1 /* Redirection Hint Lowest priority */ #define MSI_ADDR_RH_SHIFT 3 #define MSI_ADDR_DM_PHYSICAL 0x0 /* Physical Destination Mode */ #define MSI_ADDR_DM_LOGICAL 0x1 /* Logical Destination Mode */ #define MSI_ADDR_DM_SHIFT 2 /* * definitions for MSI Data */ #define MSI_DATA_DELIVERY_FIXED 0x0 /* Fixed delivery */ #define MSI_DATA_DELIVERY_LOPRI 0x1 /* Lowest priority delivery */ #define MSI_DATA_DELIVERY_SMI 0x2 #define MSI_DATA_DELIVERY_NMI 0x4 #define MSI_DATA_DELIVERY_INIT 0x5 #define MSI_DATA_DELIVERY_EXTINT 0x7 #define MSI_DATA_DELIVERY_SHIFT 8 #define MSI_DATA_TM_EDGE 0x0 /* MSI is edge sensitive */ #define MSI_DATA_TM_LEVEL 0x1 /* level sensitive */ #define MSI_DATA_TM_SHIFT 15 #define MSI_DATA_LEVEL_DEASSERT 0x0 #define MSI_DATA_LEVEL_ASSERT 0x1 /* Edge always assert */ #define MSI_DATA_LEVEL_SHIFT 14 /* * use to define each irq setup by the apic */ typedef struct apic_irq { short airq_mps_intr_index; /* index into mps interrupt entries */ /* table */ uchar_t airq_intin_no; uchar_t airq_ioapicindex; dev_info_t *airq_dip; /* device corresponding to this interrupt */ /* * IRQ could be shared (in H/W) in which case dip & major will be * for the one that was last added at this level. We cannot keep a * linked list as delspl does not tell us which device has just * been unloaded. For most servers where we are worried about * performance, interrupt should not be shared & should not be * a problem. This does not cause any correctness issue - dip is * used only as an optimisation to avoid going thru all the tables * in translate IRQ (which is always called twice due to brokenness * in the way IPLs are determined for devices). major is used only * to bind interrupts corresponding to the same device on the same * CPU. Not finding major will just cause it to be potentially bound * to another CPU. */ major_t airq_major; /* major number corresponding to the device */ ushort_t airq_rdt_entry; /* level, polarity & trig mode */ uchar_t airq_cpu; /* Which CPU are we bound to ? */ uchar_t airq_temp_cpu; /* Could be diff from cpu due to disable_intr */ uchar_t airq_vector; /* Vector chosen for this irq */ uchar_t airq_share; /* number of interrupts at this irq */ uchar_t airq_share_id; /* id to identify source from irqno */ uchar_t airq_ipl; /* The ipl at which this is handled */ iflag_t airq_iflag; /* interrupt flag */ uchar_t airq_origirq; /* original irq passed in */ uint_t airq_busy; /* How frequently did clock find */ /* us in this */ struct apic_irq *airq_next; /* chain of shared intpts */ } apic_irq_t; #define IRQ_USER_BOUND 0x80 /* user requested bind if set in airq_cpu */ #define IRQ_UNBOUND (uchar_t)-1 /* set in airq_cpu and airq_temp_cpu */ #define IRQ_UNINIT (uchar_t)-2 /* in airq_temp_cpu till addspl called */ /* Macros to help deal with shared interrupts */ #define VIRTIRQ(irqno, share_id) ((irqno) | ((share_id) << 8)) #define IRQINDEX(irq) ((irq) & 0xFF) /* Mask to get irq from virtual irq */ typedef struct apic_cpus_info { uchar_t aci_local_id; uchar_t aci_local_ver; uchar_t aci_status; uchar_t aci_redistribute; /* Selected for redistribution */ uint_t aci_busy; /* Number of ticks we were in ISR */ uint_t aci_spur_cnt; /* # of spurious intpts on this cpu */ uint_t aci_ISR_in_progress; /* big enough to hold 1 << MAXIPL */ uchar_t aci_curipl; /* IPL of current ISR */ uchar_t aci_current[MAXIPL]; /* Current IRQ at each IPL */ uint32_t aci_bound; /* # of user requested binds ? */ uint32_t aci_temp_bound; /* # of non user IRQ binds */ uchar_t aci_idle; /* The CPU is idle */ /* * fill to make sure each struct is in seperate cache line. * Or atleast that ISR_in_progress/curipl is not shared with something * that is read/written heavily by another CPU. * Given kmem_alloc guarantees alignment to 8 bytes, having 8 * bytes on each side will isolate us in a 16 byte cache line. */ } apic_cpus_info_t; #define APIC_CPU_ONLINE 1 #define APIC_CPU_INTR_ENABLE 2 /* * Various poweroff methods and ports & bits for them */ #define APIC_POWEROFF_NONE 0 #define APIC_POWEROFF_VIA_RTC 1 #define APIC_POWEROFF_VIA_ASPEN_BMC 2 #define APIC_POWEROFF_VIA_SITKA_BMC 3 /* For RTC */ #define RTC_REGA 0x0a #define PFR_REG 0x4a /* extended control register */ #define PAB_CBIT 0x08 #define WF_FLAG 0x02 #define KS_FLAG 0x01 #define EXT_BANK 0x10 /* For Aspen/Drake BMC */ #define CC_SMS_GET_STATUS 0x40 #define CC_SMS_WR_START 0x41 #define CC_SMS_WR_NEXT 0x42 #define CC_SMS_WR_END 0x43 #define MISMIC_DATA_REGISTER 0x0ca9 #define MISMIC_CNTL_REGISTER 0x0caa #define MISMIC_FLAG_REGISTER 0x0cab #define MISMIC_BUSY_MASK 0x01 /* For Sitka/Cabrillo BMC */ #define SMS_GET_STATUS 0x60 #define SMS_WRITE_START 0x61 #define SMS_WRITE_END 0x62 #define SMS_DATA_REGISTER 0x0ca2 #define SMS_STATUS_REGISTER 0x0ca3 #define SMS_COMMAND_REGISTER 0x0ca3 #define SMS_IBF_MASK 0x02 #define SMS_STATE_MASK 0xc0 #define SMS_IDLE_STATE 0x00 #define SMS_READ_STATE 0x40 #define SMS_WRITE_STATE 0x80 #define SMS_ERROR_STATE 0xc0 extern uint32_t ioapic_read(int ioapic_ix, uint32_t reg); extern void ioapic_write(int ioapic_ix, uint32_t reg, uint32_t value); /* Macros for reading/writing the IOAPIC RDT entries */ #define READ_IOAPIC_RDT_ENTRY_LOW_DWORD(ioapic_ix, ipin) \ ioapic_read(ioapic_ix, APIC_RDT_CMD + (2 * (ipin))) #define READ_IOAPIC_RDT_ENTRY_HIGH_DWORD(ioapic_ix, ipin) \ ioapic_read(ioapic_ix, APIC_RDT_CMD2 + (2 * (ipin))) #define WRITE_IOAPIC_RDT_ENTRY_LOW_DWORD(ioapic_ix, ipin, value) \ ioapic_write(ioapic_ix, APIC_RDT_CMD + (2 * (ipin)), value) #define WRITE_IOAPIC_RDT_ENTRY_HIGH_DWORD(ioapic_ix, ipin, value) \ ioapic_write(ioapic_ix, APIC_RDT_CMD2 + (2 * (ipin)), value) /* Used by PSM_INTR_OP_GET_INTR to return device information. */ typedef struct { uint16_t avgi_req_flags; /* request flags - to kernel */ uint8_t avgi_num_devs; /* # devs on this ino - from kernel */ uint8_t avgi_vector; /* vector */ uint32_t avgi_cpu_id; /* cpu of interrupt - from kernel */ dev_info_t **avgi_dip_list; /* kmem_alloc'ed list of dev_infos. */ /* Contains num_devs elements. */ } apic_get_intr_t; /* Masks for avgi_req_flags. */ #define PSMGI_REQ_CPUID 0x1 /* Request CPU ID */ #define PSMGI_REQ_NUM_DEVS 0x2 /* Request num of devices on vector */ #define PSMGI_REQ_VECTOR 0x4 #define PSMGI_REQ_GET_DEVS 0x8 /* Request device list */ #define PSMGI_REQ_ALL 0xf /* Request everything */ /* Other flags */ #define PSMGI_INTRBY_VEC 0 /* Vec passed. xlate to IRQ needed */ #define PSMGI_INTRBY_IRQ 0x8000 /* IRQ passed. no xlate needed */ #define PSMGI_INTRBY_FLAGS 0x8000 /* Mask for this flag */ /* * Use scaled-fixed-point arithmetic to calculate apic ticks. * Round when dividing (by adding half of divisor to dividend) * for one extra bit of precision. */ #define SF (1ULL<<20) /* Scaling Factor: scale by 2^20 */ #define APIC_TICKS_TO_NSECS(ticks) ((((int64_t)(ticks) * SF) + \ apic_ticks_per_SFnsecs / 2) / \ apic_ticks_per_SFnsecs); #define APIC_NSECS_TO_TICKS(nsecs) (((int64_t)(nsecs) * \ apic_ticks_per_SFnsecs + (SF/2)) / SF) extern int apic_verbose; /* Flag definitions for apic_verbose */ #define APIC_VERBOSE_IOAPIC_FLAG 0x00000001 #define APIC_VERBOSE_IRQ_FLAG 0x00000002 #define APIC_VERBOSE_POWEROFF_FLAG 0x00000004 #define APIC_VERBOSE_POWEROFF_PAUSE_FLAG 0x00000008 #define APIC_VERBOSE_IOAPIC(fmt) \ if (apic_verbose & APIC_VERBOSE_IOAPIC_FLAG) \ cmn_err fmt; #define APIC_VERBOSE_IRQ(fmt) \ if (apic_verbose & APIC_VERBOSE_IRQ_FLAG) \ cmn_err fmt; #define APIC_VERBOSE_POWEROFF(fmt) \ if (apic_verbose & APIC_VERBOSE_POWEROFF_FLAG) \ prom_printf fmt; #ifdef DEBUG #define DENT 0x0001 extern int apic_debug; /* * set apic_restrict_vector to the # of vectors we want to allow per range * useful in testing shared interrupt logic by setting it to 2 or 3 */ extern int apic_restrict_vector; #define APIC_DEBUG_MSGBUFSIZE 2048 extern int apic_debug_msgbuf[]; extern int apic_debug_msgbufindex; /* * Put "int" info into debug buffer. No MP consistency, but light weight. * Good enough for most debugging. */ #define APIC_DEBUG_BUF_PUT(x) \ apic_debug_msgbuf[apic_debug_msgbufindex++] = x; \ if (apic_debug_msgbufindex >= (APIC_DEBUG_MSGBUFSIZE - NCPU)) \ apic_debug_msgbufindex = 0; #endif /* DEBUG */ extern int apic_error; /* values which apic_error can take. Not catastrophic, but may help debug */ #define APIC_ERR_BOOT_EOI 0x1 #define APIC_ERR_GET_IPIVECT_FAIL 0x2 #define APIC_ERR_INVALID_INDEX 0x4 #define APIC_ERR_MARK_VECTOR_FAIL 0x8 #define APIC_ERR_APIC_ERROR 0x40000000 #define APIC_ERR_NMI 0x80000000 /* * ACPI definitions */ /* _PIC method arguments */ #define ACPI_PIC_MODE 0 #define ACPI_APIC_MODE 1 /* APIC error flags we care about */ #define APIC_SEND_CS_ERROR 0x01 #define APIC_RECV_CS_ERROR 0x02 #define APIC_CS_ERRORS (APIC_SEND_CS_ERROR|APIC_RECV_CS_ERROR) /* Maximum number of times to retry reprogramming at apic_intr_exit time */ #define APIC_REPROGRAM_MAX_TRIES 10000 /* Parameter to ioapic_init_intr(): Should ioapic ints be masked? */ #define IOAPIC_MASK 1 #define IOAPIC_NOMASK 0 #define INTR_ROUND_ROBIN_WITH_AFFINITY 0 #define INTR_ROUND_ROBIN 1 #define INTR_LOWEST_PRIORITY 2 struct ioapic_reprogram_data { boolean_t done; apic_irq_t *irqp; /* The CPU to which the int will be bound */ int bindcpu; /* # times the reprogram timeout was called */ unsigned tries; }; /* The irq # is implicit in the array index: */ extern struct ioapic_reprogram_data apic_reprogram_info[]; extern void apic_intr_exit(int ipl, int irq); extern int apic_probe_common(); extern void apic_init_common(); extern void ioapic_init_intr(); extern void ioapic_disable_redirection(); extern int apic_addspl_common(int irqno, int ipl, int min_ipl, int max_ipl); extern int apic_delspl_common(int irqno, int ipl, int min_ipl, int max_ipl); extern void apic_cleanup_busy(); extern void apic_intr_redistribute(); extern uchar_t apic_xlate_vector(uchar_t vector); extern uchar_t apic_allocate_vector(int ipl, int irq, int pri); extern void apic_free_vector(uchar_t vector); extern int apic_allocate_irq(int irq); extern uchar_t apic_bind_intr(dev_info_t *dip, int irq, uchar_t ioapicid, uchar_t intin); extern int apic_rebind(apic_irq_t *irq_ptr, int bind_cpu, struct ioapic_reprogram_data *drep); extern int apic_rebind_all(apic_irq_t *irq_ptr, int bind_cpu); extern int apic_introp_xlate(dev_info_t *dip, struct intrspec *ispec, int type); extern int apic_intr_ops(dev_info_t *dip, ddi_intr_handle_impl_t *hdlp, psm_intr_op_t intr_op, int *result); extern boolean_t apic_cpu_in_range(int cpu); extern int apic_check_msi_support(); extern apic_irq_t *apic_find_irq(dev_info_t *dip, struct intrspec *ispec, int type); extern int apic_navail_vector(dev_info_t *dip, int pri); extern int apic_alloc_vectors(dev_info_t *dip, int inum, int count, int pri, int type, int behavior); extern void apic_free_vectors(dev_info_t *dip, int inum, int count, int pri, int type); extern int apic_get_vector_intr_info(int vecirq, apic_get_intr_t *intr_params_p); extern uchar_t apic_find_multi_vectors(int pri, int count); extern int apic_setup_io_intr(void *p, int irq, boolean_t deferred); extern uint32_t *mapin_apic(uint32_t addr, size_t len, int flags); extern uint32_t *mapin_ioapic(uint32_t addr, size_t len, int flags); extern void mapout_apic(caddr_t addr, size_t len); extern void mapout_ioapic(caddr_t addr, size_t len); extern uchar_t apic_modify_vector(uchar_t vector, int irq); extern int apic_pci_msi_unconfigure(dev_info_t *rdip, int type, int inum); extern int apic_pci_msi_disable_mode(dev_info_t *rdip, int type, int inum); extern int apic_pci_msi_enable_mode(dev_info_t *rdip, int type, int inum); extern volatile uint32_t *apicadr; /* virtual addr of local APIC */ extern int apic_forceload; extern apic_cpus_info_t *apic_cpus; extern cpuset_t apic_cpumask; extern uint_t apic_flag; extern uchar_t apic_ipltopri[MAXIPL+1]; extern uchar_t apic_vector_to_irq[APIC_MAX_VECTOR+1]; extern int apic_max_device_irq; extern int apic_min_device_irq; extern apic_irq_t *apic_irq_table[APIC_MAX_VECTOR+1]; extern volatile uint32_t *apicioadr[MAX_IO_APIC]; extern uchar_t apic_io_id[MAX_IO_APIC]; extern lock_t apic_ioapic_lock; extern uint32_t apic_physaddr[MAX_IO_APIC]; extern kmutex_t airq_mutex; extern int apic_first_avail_irq; extern uchar_t apic_vectortoipl[APIC_AVAIL_VECTOR / APIC_VECTOR_PER_IPL]; extern int apic_imcrp; extern int apic_revector_pending; extern char apic_level_intr[APIC_MAX_VECTOR+1]; extern uchar_t apic_resv_vector[MAXIPL+1]; extern int apic_sample_factor_redistribution; extern int apic_int_busy_mark; extern int apic_int_free_mark; extern int apic_diff_for_redistribution; extern int apic_poweroff_method; extern int apic_enable_acpi; extern int apic_nproc; extern int apic_next_bind_cpu; extern int apic_redistribute_sample_interval; extern int apic_multi_msi_enable; extern int apic_multi_msi_max; extern int apic_sci_vect; #ifdef __cplusplus } #endif #endif /* _SYS_APIC_APIC_H */