/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2009 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. * * Copyright 2012 Nexenta Systems, Inc. All rights reserved. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef __xpv #include #endif /* * AMD-specific equivalence table */ static ucode_eqtbl_amd_t *ucode_eqtbl_amd; /* * mcpu_ucode_info for the boot CPU. Statically allocated. */ static struct cpu_ucode_info cpu_ucode_info0; static ucode_file_t ucodefile; static void* ucode_zalloc(processorid_t, size_t); static void ucode_free(processorid_t, void *, size_t); static int ucode_capable_amd(cpu_t *); static int ucode_capable_intel(cpu_t *); static ucode_errno_t ucode_extract_amd(ucode_update_t *, uint8_t *, int); static ucode_errno_t ucode_extract_intel(ucode_update_t *, uint8_t *, int); static void ucode_file_reset_amd(ucode_file_t *, processorid_t); static void ucode_file_reset_intel(ucode_file_t *, processorid_t); static uint32_t ucode_load_amd(ucode_file_t *, cpu_ucode_info_t *, cpu_t *); static uint32_t ucode_load_intel(ucode_file_t *, cpu_ucode_info_t *, cpu_t *); #ifdef __xpv static void ucode_load_xpv(ucode_update_t *); static void ucode_chipset_amd(uint8_t *, int); #endif static int ucode_equiv_cpu_amd(cpu_t *, uint16_t *); static ucode_errno_t ucode_locate_amd(cpu_t *, cpu_ucode_info_t *, ucode_file_t *); static ucode_errno_t ucode_locate_intel(cpu_t *, cpu_ucode_info_t *, ucode_file_t *); #ifndef __xpv static ucode_errno_t ucode_match_amd(uint16_t, cpu_ucode_info_t *, ucode_file_amd_t *, int); #endif static ucode_errno_t ucode_match_intel(int, cpu_ucode_info_t *, ucode_header_intel_t *, ucode_ext_table_intel_t *); static void ucode_read_rev_amd(cpu_ucode_info_t *); static void ucode_read_rev_intel(cpu_ucode_info_t *); static const struct ucode_ops ucode_amd = { MSR_AMD_PATCHLOADER, ucode_capable_amd, ucode_file_reset_amd, ucode_read_rev_amd, ucode_load_amd, ucode_validate_amd, ucode_extract_amd, ucode_locate_amd }; static const struct ucode_ops ucode_intel = { MSR_INTC_UCODE_WRITE, ucode_capable_intel, ucode_file_reset_intel, ucode_read_rev_intel, ucode_load_intel, ucode_validate_intel, ucode_extract_intel, ucode_locate_intel }; const struct ucode_ops *ucode; static const char ucode_failure_fmt[] = "cpu%d: failed to update microcode from version 0x%x to 0x%x\n"; static const char ucode_success_fmt[] = "?cpu%d: microcode has been updated from version 0x%x to 0x%x\n"; /* * Force flag. If set, the first microcode binary that matches * signature and platform id will be used for microcode update, * regardless of version. Should only be used for debugging. */ int ucode_force_update = 0; /* * Allocate space for mcpu_ucode_info in the machcpu structure * for all non-boot CPUs. */ void ucode_alloc_space(cpu_t *cp) { ASSERT(cp->cpu_id != 0); ASSERT(cp->cpu_m.mcpu_ucode_info == NULL); cp->cpu_m.mcpu_ucode_info = kmem_zalloc(sizeof (*cp->cpu_m.mcpu_ucode_info), KM_SLEEP); } void ucode_free_space(cpu_t *cp) { ASSERT(cp->cpu_m.mcpu_ucode_info != NULL); ASSERT(cp->cpu_m.mcpu_ucode_info != &cpu_ucode_info0); kmem_free(cp->cpu_m.mcpu_ucode_info, sizeof (*cp->cpu_m.mcpu_ucode_info)); cp->cpu_m.mcpu_ucode_info = NULL; } /* * Called when we are done with microcode update on all processors to free up * space allocated for the microcode file. */ void ucode_cleanup() { if (ucode == NULL) return; ucode->file_reset(&ucodefile, -1); } /* * Allocate/free a buffer used to hold ucode data. Space for the boot CPU is * allocated with BOP_ALLOC() and does not require a free. */ static void* ucode_zalloc(processorid_t id, size_t size) { if (id) return (kmem_zalloc(size, KM_NOSLEEP)); /* BOP_ALLOC() failure results in panic */ return (BOP_ALLOC(bootops, NULL, size, MMU_PAGESIZE)); } static void ucode_free(processorid_t id, void* buf, size_t size) { if (id) kmem_free(buf, size); } /* * Check whether or not a processor is capable of microcode operations * Returns 1 if it is capable, 0 if not. * * At this point we only support microcode update for: * - Intel processors family 6 and above, and * - AMD processors family 0x10 and above. * * We also assume that we don't support a mix of Intel and * AMD processors in the same box. * * An i86xpv guest domain or VM can't update the microcode. */ #define XPVDOMU_OR_HVM \ ((hwenv == HW_XEN_PV && !is_controldom()) || (hwenv & HW_VIRTUAL) != 0) /*ARGSUSED*/ static int ucode_capable_amd(cpu_t *cp) { int hwenv = get_hwenv(); if (XPVDOMU_OR_HVM) return (0); return (cpuid_getfamily(cp) >= 0x10); } static int ucode_capable_intel(cpu_t *cp) { int hwenv = get_hwenv(); if (XPVDOMU_OR_HVM) return (0); return (cpuid_getfamily(cp) >= 6); } /* * Called when it is no longer necessary to keep the microcode around, * or when the cached microcode doesn't match the CPU being processed. */ static void ucode_file_reset_amd(ucode_file_t *ufp, processorid_t id) { ucode_file_amd_t *ucodefp = ufp->amd; if (ucodefp == NULL) return; ucode_free(id, ucodefp, sizeof (ucode_file_amd_t)); ufp->amd = NULL; } static void ucode_file_reset_intel(ucode_file_t *ufp, processorid_t id) { ucode_file_intel_t *ucodefp = &ufp->intel; int total_size, body_size; if (ucodefp == NULL || ucodefp->uf_header == NULL) return; total_size = UCODE_TOTAL_SIZE_INTEL(ucodefp->uf_header->uh_total_size); body_size = UCODE_BODY_SIZE_INTEL(ucodefp->uf_header->uh_body_size); if (ucodefp->uf_body) { ucode_free(id, ucodefp->uf_body, body_size); ucodefp->uf_body = NULL; } if (ucodefp->uf_ext_table) { int size = total_size - body_size - UCODE_HEADER_SIZE_INTEL; ucode_free(id, ucodefp->uf_ext_table, size); ucodefp->uf_ext_table = NULL; } ucode_free(id, ucodefp->uf_header, UCODE_HEADER_SIZE_INTEL); ucodefp->uf_header = NULL; } /* * Find the equivalent CPU id in the equivalence table. */ static int ucode_equiv_cpu_amd(cpu_t *cp, uint16_t *eq_sig) { char name[MAXPATHLEN]; intptr_t fd; int count; int offset = 0, cpi_sig = cpuid_getsig(cp); ucode_eqtbl_amd_t *eqtbl = ucode_eqtbl_amd; (void) snprintf(name, MAXPATHLEN, "/%s/%s/equivalence-table", UCODE_INSTALL_PATH, cpuid_getvendorstr(cp)); /* * No kmem_zalloc() etc. available on boot cpu. */ if (cp->cpu_id == 0) { if ((fd = kobj_open(name)) == -1) return (EM_OPENFILE); /* ucode_zalloc() cannot fail on boot cpu */ eqtbl = ucode_zalloc(cp->cpu_id, sizeof (*eqtbl)); ASSERT(eqtbl); do { count = kobj_read(fd, (int8_t *)eqtbl, sizeof (*eqtbl), offset); if (count != sizeof (*eqtbl)) { (void) kobj_close(fd); return (EM_HIGHERREV); } offset += count; } while (eqtbl->ue_inst_cpu && eqtbl->ue_inst_cpu != cpi_sig); (void) kobj_close(fd); } /* * If not already done, load the equivalence table. * Not done on boot CPU. */ if (eqtbl == NULL) { struct _buf *eq; uint64_t size; if ((eq = kobj_open_file(name)) == (struct _buf *)-1) return (EM_OPENFILE); if (kobj_get_filesize(eq, &size) < 0) { kobj_close_file(eq); return (EM_OPENFILE); } ucode_eqtbl_amd = kmem_zalloc(size, KM_NOSLEEP); if (ucode_eqtbl_amd == NULL) { kobj_close_file(eq); return (EM_NOMEM); } count = kobj_read_file(eq, (char *)ucode_eqtbl_amd, size, 0); kobj_close_file(eq); if (count != size) return (EM_FILESIZE); } /* Get the equivalent CPU id. */ if (cp->cpu_id) for (eqtbl = ucode_eqtbl_amd; eqtbl->ue_inst_cpu && eqtbl->ue_inst_cpu != cpi_sig; eqtbl++) ; *eq_sig = eqtbl->ue_equiv_cpu; /* No equivalent CPU id found, assume outdated microcode file. */ if (*eq_sig == 0) return (EM_HIGHERREV); return (EM_OK); } /* * xVM cannot check for the presence of PCI devices. Look for chipset- * specific microcode patches in the container file and disable them * by setting their CPU revision to an invalid value. */ #ifdef __xpv static void ucode_chipset_amd(uint8_t *buf, int size) { ucode_header_amd_t *uh; uint32_t *ptr = (uint32_t *)buf; int len = 0; /* skip to first microcode patch */ ptr += 2; len = *ptr++; ptr += len >> 2; size -= len; while (size >= sizeof (ucode_header_amd_t) + 8) { ptr++; len = *ptr++; uh = (ucode_header_amd_t *)ptr; ptr += len >> 2; size -= len; if (uh->uh_nb_id) { cmn_err(CE_WARN, "ignoring northbridge-specific ucode: " "chipset id %x, revision %x", uh->uh_nb_id, uh->uh_nb_rev); uh->uh_cpu_rev = 0xffff; } if (uh->uh_sb_id) { cmn_err(CE_WARN, "ignoring southbridge-specific ucode: " "chipset id %x, revision %x", uh->uh_sb_id, uh->uh_sb_rev); uh->uh_cpu_rev = 0xffff; } } } #endif /* * Populate the ucode file structure from microcode file corresponding to * this CPU, if exists. * * Return EM_OK on success, corresponding error code on failure. */ /*ARGSUSED*/ static ucode_errno_t ucode_locate_amd(cpu_t *cp, cpu_ucode_info_t *uinfop, ucode_file_t *ufp) { char name[MAXPATHLEN]; intptr_t fd; int count, rc; ucode_file_amd_t *ucodefp = ufp->amd; #ifndef __xpv uint16_t eq_sig = 0; int i; /* get equivalent CPU id */ if ((rc = ucode_equiv_cpu_amd(cp, &eq_sig)) != EM_OK) return (rc); /* * Allocate a buffer for the microcode patch. If the buffer has been * allocated before, check for a matching microcode to avoid loading * the file again. */ if (ucodefp == NULL) ucodefp = ucode_zalloc(cp->cpu_id, sizeof (*ucodefp)); else if (ucode_match_amd(eq_sig, uinfop, ucodefp, sizeof (*ucodefp)) == EM_OK) return (EM_OK); if (ucodefp == NULL) return (EM_NOMEM); ufp->amd = ucodefp; /* * Find the patch for this CPU. The patch files are named XXXX-YY, where * XXXX is the equivalent CPU id and YY is the running patch number. * Patches specific to certain chipsets are guaranteed to have lower * numbers than less specific patches, so we can just load the first * patch that matches. */ for (i = 0; i < 0xff; i++) { (void) snprintf(name, MAXPATHLEN, "/%s/%s/%04X-%02X", UCODE_INSTALL_PATH, cpuid_getvendorstr(cp), eq_sig, i); if ((fd = kobj_open(name)) == -1) return (EM_NOMATCH); count = kobj_read(fd, (char *)ucodefp, sizeof (*ucodefp), 0); (void) kobj_close(fd); if (ucode_match_amd(eq_sig, uinfop, ucodefp, count) == EM_OK) return (EM_OK); } return (EM_NOMATCH); #else int size = 0; char c; /* * The xVM case is special. To support mixed-revision systems, the * hypervisor will choose which patch to load for which CPU, so the * whole microcode patch container file will have to be loaded. * * Since this code is only run on the boot cpu, we don't have to care * about failing ucode_zalloc() or freeing allocated memory. */ if (cp->cpu_id != 0) return (EM_INVALIDARG); (void) snprintf(name, MAXPATHLEN, "/%s/%s/container", UCODE_INSTALL_PATH, cpuid_getvendorstr(cp)); if ((fd = kobj_open(name)) == -1) return (EM_OPENFILE); /* get the file size by counting bytes */ do { count = kobj_read(fd, &c, 1, size); size += count; } while (count); ucodefp = ucode_zalloc(cp->cpu_id, sizeof (*ucodefp)); ASSERT(ucodefp); ufp->amd = ucodefp; ucodefp->usize = size; ucodefp->ucodep = ucode_zalloc(cp->cpu_id, size); ASSERT(ucodefp->ucodep); /* load the microcode patch container file */ count = kobj_read(fd, (char *)ucodefp->ucodep, size, 0); (void) kobj_close(fd); if (count != size) return (EM_FILESIZE); /* make sure the container file is valid */ rc = ucode->validate(ucodefp->ucodep, ucodefp->usize); if (rc != EM_OK) return (rc); /* disable chipset-specific patches */ ucode_chipset_amd(ucodefp->ucodep, ucodefp->usize); return (EM_OK); #endif } static ucode_errno_t ucode_locate_intel(cpu_t *cp, cpu_ucode_info_t *uinfop, ucode_file_t *ufp) { char name[MAXPATHLEN]; intptr_t fd; int count; int header_size = UCODE_HEADER_SIZE_INTEL; int cpi_sig = cpuid_getsig(cp); ucode_errno_t rc = EM_OK; ucode_file_intel_t *ucodefp = &ufp->intel; ASSERT(ucode); /* * If the microcode matches the CPU we are processing, use it. */ if (ucode_match_intel(cpi_sig, uinfop, ucodefp->uf_header, ucodefp->uf_ext_table) == EM_OK && ucodefp->uf_body != NULL) { return (EM_OK); } /* * Look for microcode file with the right name. */ (void) snprintf(name, MAXPATHLEN, "/%s/%s/%08X-%02X", UCODE_INSTALL_PATH, cpuid_getvendorstr(cp), cpi_sig, uinfop->cui_platid); if ((fd = kobj_open(name)) == -1) { return (EM_OPENFILE); } /* * We found a microcode file for the CPU we are processing, * reset the microcode data structure and read in the new * file. */ ucode->file_reset(ufp, cp->cpu_id); ucodefp->uf_header = ucode_zalloc(cp->cpu_id, header_size); if (ucodefp->uf_header == NULL) return (EM_NOMEM); count = kobj_read(fd, (char *)ucodefp->uf_header, header_size, 0); switch (count) { case UCODE_HEADER_SIZE_INTEL: { ucode_header_intel_t *uhp = ucodefp->uf_header; uint32_t offset = header_size; int total_size, body_size, ext_size; uint32_t sum = 0; /* * Make sure that the header contains valid fields. */ if ((rc = ucode_header_validate_intel(uhp)) == EM_OK) { total_size = UCODE_TOTAL_SIZE_INTEL(uhp->uh_total_size); body_size = UCODE_BODY_SIZE_INTEL(uhp->uh_body_size); ucodefp->uf_body = ucode_zalloc(cp->cpu_id, body_size); if (ucodefp->uf_body == NULL) { rc = EM_NOMEM; break; } if (kobj_read(fd, (char *)ucodefp->uf_body, body_size, offset) != body_size) rc = EM_FILESIZE; } if (rc) break; sum = ucode_checksum_intel(0, header_size, (uint8_t *)ucodefp->uf_header); if (ucode_checksum_intel(sum, body_size, ucodefp->uf_body)) { rc = EM_CHECKSUM; break; } /* * Check to see if there is extended signature table. */ offset = body_size + header_size; ext_size = total_size - offset; if (ext_size <= 0) break; ucodefp->uf_ext_table = ucode_zalloc(cp->cpu_id, ext_size); if (ucodefp->uf_ext_table == NULL) { rc = EM_NOMEM; break; } if (kobj_read(fd, (char *)ucodefp->uf_ext_table, ext_size, offset) != ext_size) { rc = EM_FILESIZE; } else if (ucode_checksum_intel(0, ext_size, (uint8_t *)(ucodefp->uf_ext_table))) { rc = EM_CHECKSUM; } else { int i; ext_size -= UCODE_EXT_TABLE_SIZE_INTEL; for (i = 0; i < ucodefp->uf_ext_table->uet_count; i++) { if (ucode_checksum_intel(0, UCODE_EXT_SIG_SIZE_INTEL, (uint8_t *)(&(ucodefp->uf_ext_table-> uet_ext_sig[i])))) { rc = EM_CHECKSUM; break; } } } break; } default: rc = EM_FILESIZE; break; } kobj_close(fd); if (rc != EM_OK) return (rc); rc = ucode_match_intel(cpi_sig, uinfop, ucodefp->uf_header, ucodefp->uf_ext_table); return (rc); } #ifndef __xpv static ucode_errno_t ucode_match_amd(uint16_t eq_sig, cpu_ucode_info_t *uinfop, ucode_file_amd_t *ucodefp, int size) { ucode_header_amd_t *uh; if (ucodefp == NULL || size < sizeof (ucode_header_amd_t)) return (EM_NOMATCH); uh = &ucodefp->uf_header; /* * Don't even think about loading patches that would require code * execution. Does not apply to patches for family 0x14 and beyond. */ if (uh->uh_cpu_rev < 0x5000 && size > offsetof(ucode_file_amd_t, uf_code_present) && ucodefp->uf_code_present) return (EM_NOMATCH); if (eq_sig != uh->uh_cpu_rev) return (EM_NOMATCH); if (uh->uh_nb_id) { cmn_err(CE_WARN, "ignoring northbridge-specific ucode: " "chipset id %x, revision %x", uh->uh_nb_id, uh->uh_nb_rev); return (EM_NOMATCH); } if (uh->uh_sb_id) { cmn_err(CE_WARN, "ignoring southbridge-specific ucode: " "chipset id %x, revision %x", uh->uh_sb_id, uh->uh_sb_rev); return (EM_NOMATCH); } if (uh->uh_patch_id <= uinfop->cui_rev && !ucode_force_update) return (EM_HIGHERREV); return (EM_OK); } #endif /* * Returns 1 if the microcode is for this processor; 0 otherwise. */ static ucode_errno_t ucode_match_intel(int cpi_sig, cpu_ucode_info_t *uinfop, ucode_header_intel_t *uhp, ucode_ext_table_intel_t *uetp) { if (uhp == NULL) return (EM_NOMATCH); if (UCODE_MATCH_INTEL(cpi_sig, uhp->uh_signature, uinfop->cui_platid, uhp->uh_proc_flags)) { if (uinfop->cui_rev >= uhp->uh_rev && !ucode_force_update) return (EM_HIGHERREV); return (EM_OK); } if (uetp != NULL) { int i; for (i = 0; i < uetp->uet_count; i++) { ucode_ext_sig_intel_t *uesp; uesp = &uetp->uet_ext_sig[i]; if (UCODE_MATCH_INTEL(cpi_sig, uesp->ues_signature, uinfop->cui_platid, uesp->ues_proc_flags)) { if (uinfop->cui_rev >= uhp->uh_rev && !ucode_force_update) return (EM_HIGHERREV); return (EM_OK); } } } return (EM_NOMATCH); } /*ARGSUSED*/ static int ucode_write(xc_arg_t arg1, xc_arg_t unused2, xc_arg_t unused3) { ucode_update_t *uusp = (ucode_update_t *)arg1; cpu_ucode_info_t *uinfop = CPU->cpu_m.mcpu_ucode_info; #ifndef __xpv on_trap_data_t otd; #endif ASSERT(ucode); ASSERT(uusp->ucodep); #ifndef __xpv /* * Check one more time to see if it is really necessary to update * microcode just in case this is a hyperthreaded processor where * the threads share the same microcode. */ if (!ucode_force_update) { ucode->read_rev(uinfop); uusp->new_rev = uinfop->cui_rev; if (uinfop->cui_rev >= uusp->expected_rev) return (0); } if (!on_trap(&otd, OT_DATA_ACCESS)) wrmsr(ucode->write_msr, (uintptr_t)uusp->ucodep); no_trap(); #endif ucode->read_rev(uinfop); uusp->new_rev = uinfop->cui_rev; return (0); } /*ARGSUSED*/ static uint32_t ucode_load_amd(ucode_file_t *ufp, cpu_ucode_info_t *uinfop, cpu_t *cp) { ucode_file_amd_t *ucodefp = ufp->amd; #ifdef __xpv ucode_update_t uus; #else on_trap_data_t otd; #endif ASSERT(ucode); ASSERT(ucodefp); #ifndef __xpv kpreempt_disable(); if (on_trap(&otd, OT_DATA_ACCESS)) { no_trap(); kpreempt_enable(); return (0); } wrmsr(ucode->write_msr, (uintptr_t)ucodefp); no_trap(); ucode->read_rev(uinfop); kpreempt_enable(); return (ucodefp->uf_header.uh_patch_id); #else uus.ucodep = ucodefp->ucodep; uus.usize = ucodefp->usize; ucode_load_xpv(&uus); ucode->read_rev(uinfop); uus.new_rev = uinfop->cui_rev; return (uus.new_rev); #endif } /*ARGSUSED2*/ static uint32_t ucode_load_intel(ucode_file_t *ufp, cpu_ucode_info_t *uinfop, cpu_t *cp) { ucode_file_intel_t *ucodefp = &ufp->intel; #ifdef __xpv uint32_t ext_offset; uint32_t body_size; uint32_t ext_size; uint8_t *ustart; uint32_t usize; ucode_update_t uus; #endif ASSERT(ucode); #ifdef __xpv /* * the hypervisor wants the header, data, and extended * signature tables. We can only get here from the boot * CPU (cpu #0), we don't need to free as ucode_zalloc() will * use BOP_ALLOC(). */ usize = UCODE_TOTAL_SIZE_INTEL(ucodefp->uf_header->uh_total_size); ustart = ucode_zalloc(cp->cpu_id, usize); ASSERT(ustart); body_size = UCODE_BODY_SIZE_INTEL(ucodefp->uf_header->uh_body_size); ext_offset = body_size + UCODE_HEADER_SIZE_INTEL; ext_size = usize - ext_offset; ASSERT(ext_size >= 0); (void) memcpy(ustart, ucodefp->uf_header, UCODE_HEADER_SIZE_INTEL); (void) memcpy(&ustart[UCODE_HEADER_SIZE_INTEL], ucodefp->uf_body, body_size); if (ext_size > 0) { (void) memcpy(&ustart[ext_offset], ucodefp->uf_ext_table, ext_size); } uus.ucodep = ustart; uus.usize = usize; ucode_load_xpv(&uus); ucode->read_rev(uinfop); uus.new_rev = uinfop->cui_rev; #else kpreempt_disable(); wrmsr(ucode->write_msr, (uintptr_t)ucodefp->uf_body); ucode->read_rev(uinfop); kpreempt_enable(); #endif return (ucodefp->uf_header->uh_rev); } #ifdef __xpv static void ucode_load_xpv(ucode_update_t *uusp) { xen_platform_op_t op; int e; ASSERT(DOMAIN_IS_INITDOMAIN(xen_info)); kpreempt_disable(); op.cmd = XENPF_microcode_update; op.interface_version = XENPF_INTERFACE_VERSION; /*LINTED: constant in conditional context*/ set_xen_guest_handle(op.u.microcode.data, uusp->ucodep); op.u.microcode.length = uusp->usize; e = HYPERVISOR_platform_op(&op); if (e != 0) { cmn_err(CE_WARN, "hypervisor failed to accept uCode update"); } kpreempt_enable(); } #endif /* __xpv */ static void ucode_read_rev_amd(cpu_ucode_info_t *uinfop) { uinfop->cui_rev = rdmsr(MSR_AMD_PATCHLEVEL); } static void ucode_read_rev_intel(cpu_ucode_info_t *uinfop) { struct cpuid_regs crs; /* * The Intel 64 and IA-32 Architecture Software Developer's Manual * recommends that MSR_INTC_UCODE_REV be loaded with 0 first, then * execute cpuid to guarantee the correct reading of this register. */ wrmsr(MSR_INTC_UCODE_REV, 0); (void) __cpuid_insn(&crs); uinfop->cui_rev = (rdmsr(MSR_INTC_UCODE_REV) >> INTC_UCODE_REV_SHIFT); } static ucode_errno_t ucode_extract_amd(ucode_update_t *uusp, uint8_t *ucodep, int size) { #ifndef __xpv uint32_t *ptr = (uint32_t *)ucodep; ucode_eqtbl_amd_t *eqtbl; ucode_file_amd_t *ufp; int count; int higher = 0; ucode_errno_t rc = EM_NOMATCH; uint16_t eq_sig; /* skip over magic number & equivalence table header */ ptr += 2; size -= 8; count = *ptr++; size -= 4; for (eqtbl = (ucode_eqtbl_amd_t *)ptr; eqtbl->ue_inst_cpu && eqtbl->ue_inst_cpu != uusp->sig; eqtbl++) ; eq_sig = eqtbl->ue_equiv_cpu; /* No equivalent CPU id found, assume outdated microcode file. */ if (eq_sig == 0) return (EM_HIGHERREV); /* Use the first microcode patch that matches. */ do { ptr += count >> 2; size -= count; if (!size) return (higher ? EM_HIGHERREV : EM_NOMATCH); ptr++; size -= 4; count = *ptr++; size -= 4; ufp = (ucode_file_amd_t *)ptr; rc = ucode_match_amd(eq_sig, &uusp->info, ufp, count); if (rc == EM_HIGHERREV) higher = 1; } while (rc != EM_OK); uusp->ucodep = (uint8_t *)ufp; uusp->usize = count; uusp->expected_rev = ufp->uf_header.uh_patch_id; #else /* * The hypervisor will choose the patch to load, so there is no way to * know the "expected revision" in advance. This is especially true on * mixed-revision systems where more than one patch will be loaded. */ uusp->expected_rev = 0; uusp->ucodep = ucodep; uusp->usize = size; ucode_chipset_amd(ucodep, size); #endif return (EM_OK); } static ucode_errno_t ucode_extract_intel(ucode_update_t *uusp, uint8_t *ucodep, int size) { uint32_t header_size = UCODE_HEADER_SIZE_INTEL; int remaining; int found = 0; ucode_errno_t search_rc = EM_NOMATCH; /* search result */ /* * Go through the whole buffer in case there are * multiple versions of matching microcode for this * processor. */ for (remaining = size; remaining > 0; ) { int total_size, body_size, ext_size; uint8_t *curbuf = &ucodep[size - remaining]; ucode_header_intel_t *uhp = (ucode_header_intel_t *)curbuf; ucode_ext_table_intel_t *uetp = NULL; ucode_errno_t tmprc; total_size = UCODE_TOTAL_SIZE_INTEL(uhp->uh_total_size); body_size = UCODE_BODY_SIZE_INTEL(uhp->uh_body_size); ext_size = total_size - (header_size + body_size); if (ext_size > 0) uetp = (ucode_ext_table_intel_t *) &curbuf[header_size + body_size]; tmprc = ucode_match_intel(uusp->sig, &uusp->info, uhp, uetp); /* * Since we are searching through a big file * containing microcode for pretty much all the * processors, we are bound to get EM_NOMATCH * at one point. However, if we return * EM_NOMATCH to users, it will really confuse * them. Therefore, if we ever find a match of * a lower rev, we will set return code to * EM_HIGHERREV. */ if (tmprc == EM_HIGHERREV) search_rc = EM_HIGHERREV; if (tmprc == EM_OK && uusp->expected_rev < uhp->uh_rev) { #ifndef __xpv uusp->ucodep = (uint8_t *)&curbuf[header_size]; #else uusp->ucodep = (uint8_t *)curbuf; #endif uusp->usize = UCODE_TOTAL_SIZE_INTEL(uhp->uh_total_size); uusp->expected_rev = uhp->uh_rev; found = 1; } remaining -= total_size; } if (!found) return (search_rc); return (EM_OK); } /* * Entry point to microcode update from the ucode_drv driver. * * Returns EM_OK on success, corresponding error code on failure. */ ucode_errno_t ucode_update(uint8_t *ucodep, int size) { int found = 0; processorid_t id; ucode_update_t cached = { 0 }; ucode_update_t *cachedp = NULL; ucode_errno_t rc = EM_OK; ucode_errno_t search_rc = EM_NOMATCH; /* search result */ cpuset_t cpuset; ASSERT(ucode); ASSERT(ucodep); CPUSET_ZERO(cpuset); if (!ucode->capable(CPU)) return (EM_NOTSUP); mutex_enter(&cpu_lock); for (id = 0; id < max_ncpus; id++) { cpu_t *cpu; ucode_update_t uus = { 0 }; ucode_update_t *uusp = &uus; /* * If there is no such CPU or it is not xcall ready, skip it. */ if ((cpu = cpu_get(id)) == NULL || !(cpu->cpu_flags & CPU_READY)) continue; uusp->sig = cpuid_getsig(cpu); bcopy(cpu->cpu_m.mcpu_ucode_info, &uusp->info, sizeof (uusp->info)); /* * If the current CPU has the same signature and platform * id as the previous one we processed, reuse the information. */ if (cachedp && cachedp->sig == cpuid_getsig(cpu) && cachedp->info.cui_platid == uusp->info.cui_platid) { uusp->ucodep = cachedp->ucodep; uusp->expected_rev = cachedp->expected_rev; /* * Intuitively we should check here to see whether the * running microcode rev is >= the expected rev, and * quit if it is. But we choose to proceed with the * xcall regardless of the running version so that * the other threads in an HT processor can update * the cpu_ucode_info structure in machcpu. */ } else if ((search_rc = ucode->extract(uusp, ucodep, size)) == EM_OK) { bcopy(uusp, &cached, sizeof (cached)); cachedp = &cached; found = 1; } /* Nothing to do */ if (uusp->ucodep == NULL) continue; #ifdef __xpv /* * for i86xpv, the hypervisor will update all the CPUs. * the hypervisor wants the header, data, and extended * signature tables. ucode_write will just read in the * updated version on all the CPUs after the update has * completed. */ if (id == 0) { ucode_load_xpv(uusp); } #endif CPUSET_ADD(cpuset, id); kpreempt_disable(); xc_sync((xc_arg_t)uusp, 0, 0, CPUSET2BV(cpuset), ucode_write); kpreempt_enable(); CPUSET_DEL(cpuset, id); if (uusp->new_rev != 0 && uusp->info.cui_rev == uusp->new_rev && !ucode_force_update) { rc = EM_HIGHERREV; } else if ((uusp->new_rev == 0) || (uusp->expected_rev != 0 && uusp->expected_rev != uusp->new_rev)) { cmn_err(CE_WARN, ucode_failure_fmt, id, uusp->info.cui_rev, uusp->expected_rev); rc = EM_UPDATE; } else { cmn_err(CE_CONT, ucode_success_fmt, id, uusp->info.cui_rev, uusp->new_rev); } } mutex_exit(&cpu_lock); if (!found) rc = search_rc; return (rc); } /* * Initialize mcpu_ucode_info, and perform microcode update if necessary. * This is the entry point from boot path where pointer to CPU structure * is available. * * cpuid_info must be initialized before ucode_check can be called. */ void ucode_check(cpu_t *cp) { cpu_ucode_info_t *uinfop; ucode_errno_t rc = EM_OK; uint32_t new_rev = 0; ASSERT(cp); /* * Space statically allocated for BSP, ensure pointer is set */ if (cp->cpu_id == 0 && cp->cpu_m.mcpu_ucode_info == NULL) cp->cpu_m.mcpu_ucode_info = &cpu_ucode_info0; uinfop = cp->cpu_m.mcpu_ucode_info; ASSERT(uinfop); /* set up function pointers if not already done */ if (!ucode) switch (cpuid_getvendor(cp)) { case X86_VENDOR_AMD: ucode = &ucode_amd; break; case X86_VENDOR_Intel: ucode = &ucode_intel; break; default: ucode = NULL; return; } if (!ucode->capable(cp)) return; /* * The MSR_INTC_PLATFORM_ID is supported in Celeron and Xeon * (Family 6, model 5 and above) and all processors after. */ if ((cpuid_getvendor(cp) == X86_VENDOR_Intel) && ((cpuid_getmodel(cp) >= 5) || (cpuid_getfamily(cp) > 6))) { uinfop->cui_platid = 1 << ((rdmsr(MSR_INTC_PLATFORM_ID) >> INTC_PLATFORM_ID_SHIFT) & INTC_PLATFORM_ID_MASK); } ucode->read_rev(uinfop); #ifdef __xpv /* * for i86xpv, the hypervisor will update all the CPUs. We only need * do do this on one of the CPUs (and there always is a CPU 0). */ if (cp->cpu_id != 0) { return; } #endif /* * Check to see if we need ucode update */ if ((rc = ucode->locate(cp, uinfop, &ucodefile)) == EM_OK) { new_rev = ucode->load(&ucodefile, uinfop, cp); if (uinfop->cui_rev != new_rev) cmn_err(CE_WARN, ucode_failure_fmt, cp->cpu_id, uinfop->cui_rev, new_rev); } /* * If we fail to find a match for any reason, free the file structure * just in case we have read in a partial file. * * Since the scratch memory for holding the microcode for the boot CPU * came from BOP_ALLOC, we will reset the data structure as if we * never did the allocation so we don't have to keep track of this * special chunk of memory. We free the memory used for the rest * of the CPUs in start_other_cpus(). */ if (rc != EM_OK || cp->cpu_id == 0) ucode->file_reset(&ucodefile, cp->cpu_id); } /* * Returns microcode revision from the machcpu structure. */ ucode_errno_t ucode_get_rev(uint32_t *revp) { int i; ASSERT(ucode); ASSERT(revp); if (!ucode->capable(CPU)) return (EM_NOTSUP); mutex_enter(&cpu_lock); for (i = 0; i < max_ncpus; i++) { cpu_t *cpu; if ((cpu = cpu_get(i)) == NULL) continue; revp[i] = cpu->cpu_m.mcpu_ucode_info->cui_rev; } mutex_exit(&cpu_lock); return (EM_OK); }