/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Enclosure Services Device target driver * * Copyright 2009 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. * Copyright (c) 2011 Bayard G. Bell. All rights reserved. * Copyright 2013 Nexenta Systems, Inc. All rights reserved. */ #include #include #include #include #include #include /* * Power management defines (should be in a common include file?) */ #define PM_HARDWARE_STATE_PROP "pm-hardware-state" #define PM_NEEDS_SUSPEND_RESUME "needs-suspend-resume" /* * Global Driver Data */ int ses_io_time = SES_IO_TIME; static int ses_retry_count = SES_RETRY_COUNT * SES_RETRY_MULTIPLIER; #ifdef DEBUG int ses_debug = 0; #else /* DEBUG */ #define ses_debug 0 #endif /* DEBUG */ /* * External Enclosure Functions */ extern int ses_softc_init(ses_softc_t *, int); extern int ses_init_enc(ses_softc_t *); extern int ses_get_encstat(ses_softc_t *, int); extern int ses_set_encstat(ses_softc_t *, uchar_t, int); extern int ses_get_objstat(ses_softc_t *, ses_objarg *, int); extern int ses_set_objstat(ses_softc_t *, ses_objarg *, int); extern int safte_softc_init(ses_softc_t *, int); extern int safte_init_enc(ses_softc_t *); extern int safte_get_encstat(ses_softc_t *, int); extern int safte_set_encstat(ses_softc_t *, uchar_t, int); extern int safte_get_objstat(ses_softc_t *, ses_objarg *, int); extern int safte_set_objstat(ses_softc_t *, ses_objarg *, int); extern int sen_softc_init(ses_softc_t *, int); extern int sen_init_enc(ses_softc_t *); extern int sen_get_encstat(ses_softc_t *, int); extern int sen_set_encstat(ses_softc_t *, uchar_t, int); extern int sen_get_objstat(ses_softc_t *, ses_objarg *, int); extern int sen_set_objstat(ses_softc_t *, ses_objarg *, int); /* * Local Function prototypes */ static int ses_info(dev_info_t *, ddi_info_cmd_t, void *, void **); static int ses_probe(dev_info_t *); static int ses_attach(dev_info_t *, ddi_attach_cmd_t); static int ses_detach(dev_info_t *, ddi_detach_cmd_t); static int is_enc_dev(ses_softc_t *, struct scsi_inquiry *, int, enctyp *); static int ses_doattach(dev_info_t *dip); static int ses_open(dev_t *, int, int, cred_t *); static int ses_close(dev_t, int, int, cred_t *); static int ses_ioctl(dev_t, int, intptr_t, int, cred_t *, int *); static encvec vecs[3] = { { ses_softc_init, ses_init_enc, ses_get_encstat, ses_set_encstat, ses_get_objstat, ses_set_objstat }, { safte_softc_init, safte_init_enc, safte_get_encstat, safte_set_encstat, safte_get_objstat, safte_set_objstat, }, { sen_softc_init, sen_init_enc, sen_get_encstat, sen_set_encstat, sen_get_objstat, sen_set_objstat } }; /* * Local Functions */ static int ses_start(struct buf *bp); static int ses_decode_sense(struct scsi_pkt *pkt, int *err); static void ses_get_pkt(struct buf *bp, int (*func)(opaque_t)); static void ses_callback(struct scsi_pkt *pkt); static void ses_restart(void *arg); /* * Local Static Data */ #ifndef D_HOTPLUG #define D_HOTPLUG 0 #endif /* D_HOTPLUG */ static struct cb_ops ses_cb_ops = { ses_open, /* open */ ses_close, /* close */ nodev, /* strategy */ nodev, /* print */ nodev, /* dump */ nodev, /* read */ nodev, /* write */ ses_ioctl, /* ioctl */ nodev, /* devmap */ nodev, /* mmap */ nodev, /* segmap */ nochpoll, /* poll */ ddi_prop_op, /* cb_prop_op */ 0, /* streamtab */ #if !defined(CB_REV) D_MP | D_NEW | D_HOTPLUG /* Driver compatibility flag */ #else /* !defined(CB_REV) */ D_MP | D_NEW | D_HOTPLUG, /* Driver compatibility flag */ CB_REV, /* cb_ops version number */ nodev, /* aread */ nodev /* awrite */ #endif /* !defined(CB_REV) */ }; static struct dev_ops ses_dev_ops = { DEVO_REV, /* devo_rev, */ 0, /* refcnt */ ses_info, /* info */ nulldev, /* identify */ ses_probe, /* probe */ ses_attach, /* attach */ ses_detach, /* detach */ nodev, /* reset */ &ses_cb_ops, /* driver operations */ (struct bus_ops *)NULL, /* bus operations */ NULL, /* power */ ddi_quiesce_not_needed, /* quiesce */ }; static void *estate = NULL; static const char *Snm = "ses"; static const char *Str = "%s\n"; static const char *efl = "copyin/copyout EFAULT @ line %d"; static const char *fail_msg = "%stransport failed: reason '%s': %s"; /* * autoconfiguration routines. */ static struct modldrv modldrv = { &mod_driverops, "SCSI Enclosure Services", &ses_dev_ops }; static struct modlinkage modlinkage = { MODREV_1, &modldrv, NULL }; int _init(void) { int status; status = ddi_soft_state_init(&estate, sizeof (ses_softc_t), 0); if (status == 0) { if ((status = mod_install(&modlinkage)) != 0) { ddi_soft_state_fini(&estate); } } return (status); } int _fini(void) { int status; if ((status = mod_remove(&modlinkage)) != 0) { return (status); } ddi_soft_state_fini(&estate); return (status); } int _info(struct modinfo *modinfop) { return (mod_info(&modlinkage, modinfop)); } static int ses_probe(dev_info_t *dip) { int err; struct scsi_device *devp; enctyp ep; /* * I finally figured out why we return success * on every probe. The devices that we attach to * don't all report as being the same "device type" * * 1) A5x00 -- report as Enclosure Services (0xD) SES * 2) A1000 -- report as Direct Access (0x0) SES * uses the same target as raid controler. * 3) D1000 -- report as processor (0x3) SAFTE * 3) D240 -- report as processor (0x3) SAFTE * * We also reportedly attach to SEN devices which I * believe reside in a Tobasco tray. I have never * been able to get one to attach. * */ if (dip == NULL) return (DDI_PROBE_FAILURE); /* SES_LOG(NULL, SES_CE_DEBUG1, "ses_probe: OK"); */ if (ddi_dev_is_sid(dip) == DDI_SUCCESS) { return (DDI_PROBE_DONTCARE); } devp = ddi_get_driver_private(dip); /* Legacy: prevent driver.conf specified ses nodes on atapi. */ if (scsi_ifgetcap(&devp->sd_address, "interconnect-type", -1) == INTERCONNECT_ATAPI) return (DDI_PROBE_FAILURE); /* * XXX: Breakage from the x86 folks. */ if (strcmp(ddi_get_name(ddi_get_parent(dip)), "ata") == 0) { return (DDI_PROBE_FAILURE); } switch (err = scsi_probe(devp, SLEEP_FUNC)) { case SCSIPROBE_EXISTS: if (is_enc_dev(NULL, devp->sd_inq, SUN_INQSIZE, &ep)) { break; } /* FALLTHROUGH */ case SCSIPROBE_NORESP: scsi_unprobe(devp); return (DDI_PROBE_FAILURE); default: SES_LOG(NULL, SES_CE_DEBUG9, "ses_probe: probe error %d", err); scsi_unprobe(devp); return (DDI_PROBE_FAILURE); } scsi_unprobe(devp); return (DDI_PROBE_SUCCESS); } static int ses_attach(dev_info_t *dip, ddi_attach_cmd_t cmd) { int inst, err; ses_softc_t *ssc; inst = ddi_get_instance(dip); switch (cmd) { case DDI_ATTACH: SES_LOG(NULL, SES_CE_DEBUG9, "ses_attach: DDI_ATTACH ses%d", inst); err = ses_doattach(dip); if (err == DDI_FAILURE) { return (DDI_FAILURE); } SES_LOG(NULL, SES_CE_DEBUG4, "ses_attach: DDI_ATTACH OK ses%d", inst); break; case DDI_RESUME: if ((ssc = ddi_get_soft_state(estate, inst)) == NULL) { return (DDI_FAILURE); } SES_LOG(ssc, SES_CE_DEBUG1, "ses_attach: DDI_ATTACH ses%d", inst); ssc->ses_suspended = 0; break; default: return (DDI_FAILURE); } return (DDI_SUCCESS); } static int is_enc_dev(ses_softc_t *ssc, struct scsi_inquiry *inqp, int iqlen, enctyp *ep) { uchar_t dt = (inqp->inq_dtype & DTYPE_MASK); uchar_t *iqd = (uchar_t *)inqp; if (dt == DTYPE_ESI) { if (strncmp(inqp->inq_vid, SEN_ID, SEN_ID_LEN) == 0) { SES_LOG(ssc, SES_CE_DEBUG3, "SEN device found"); *ep = SEN_TYPE; } else if (inqp->inq_rdf == RDF_SCSI2) { /* * Per SPC4 #6.4.2 Standard Inquiry Data, response * data format (RDF) values of 0 and 1 are Obsolete, * whereas values greater than 2 are Reserved */ SES_LOG(ssc, SES_CE_DEBUG3, "SES device found"); *ep = SES_TYPE; } else { SES_LOG(ssc, SES_CE_DEBUG3, "Pre-SCSI3 SES device"); *ep = SES_TYPE; } return (1); } if ((iqd[6] & 0x40) && inqp->inq_rdf >= RDF_SCSI2) { /* * PassThrough Device. */ *ep = SES_TYPE; SES_LOG(ssc, SES_CE_DEBUG3, "Passthru SES device"); return (1); } if (iqlen < 47) { SES_LOG(ssc, CE_NOTE, "INQUIRY data too short to determine SAF-TE"); return (0); } if (strncmp((char *)&iqd[44], "SAF-TE", 4) == 0) { *ep = SAFT_TYPE; SES_LOG(ssc, SES_CE_DEBUG3, "SAF-TE device found"); return (1); } return (0); } /* * Attach ses device. * * XXX: Power management is NOT supported. A token framework * is provided that will need to be extended assuming we have * ses devices we can power down. Currently, we don't have any. */ static int ses_doattach(dev_info_t *dip) { int inst, err; Scsidevp devp; ses_softc_t *ssc; enctyp etyp; inst = ddi_get_instance(dip); /* * Workaround for bug #4154979- for some reason we can * be called with identical instance numbers but for * different dev_info_t-s- all but one are bogus. * * Bad Dog! No Biscuit! * * A quick workaround might be to call ddi_soft_state_zalloc * unconditionally, as the implementation fails these calls * if there's an item already allocated. A more reasonable * and longer term change is to move the allocation past * the probe for the device's existence as most of these * 'bogus' calls are for nonexistent devices. */ devp = ddi_get_driver_private(dip); devp->sd_dev = dip; /* * Determine whether the { i, t, l } we're called * to start is an enclosure services device. */ /* * Call the scsi_probe routine to see whether * we actually have an Enclosure Services device at * this address. */ err = scsi_probe(devp, SLEEP_FUNC); if (err != SCSIPROBE_EXISTS) { SES_LOG(NULL, SES_CE_DEBUG9, "ses_doattach: probe error %d", err); scsi_unprobe(devp); return (DDI_FAILURE); } /* Call is_enc_dev() to get the etyp */ if (!(is_enc_dev(NULL, devp->sd_inq, SUN_INQSIZE, &etyp))) { SES_LOG(NULL, CE_WARN, "ses_doattach: ses%d: is_enc_dev failure", inst); scsi_unprobe(devp); return (DDI_FAILURE); } if (ddi_soft_state_zalloc(estate, inst) != DDI_SUCCESS) { scsi_unprobe(devp); SES_LOG(NULL, CE_NOTE, "ses%d: softalloc fails", inst); return (DDI_FAILURE); } ssc = ddi_get_soft_state(estate, inst); if (ssc == NULL) { scsi_unprobe(devp); SES_LOG(NULL, CE_NOTE, "ses%d: get_soft_state fails", inst); return (DDI_FAILURE); } devp->sd_private = (opaque_t)ssc; ssc->ses_devp = devp; err = ddi_create_minor_node(dip, "0", S_IFCHR, inst, DDI_NT_SCSI_ENCLOSURE, NULL); if (err == DDI_FAILURE) { ddi_remove_minor_node(dip, NULL); SES_LOG(ssc, CE_NOTE, "minor node creation failed"); ddi_soft_state_free(estate, inst); scsi_unprobe(devp); return (DDI_FAILURE); } ssc->ses_type = etyp; ssc->ses_vec = vecs[etyp]; /* Call SoftC Init Routine A bit later... */ ssc->ses_rqbp = scsi_alloc_consistent_buf(SES_ROUTE(ssc), NULL, MAX_SENSE_LENGTH, B_READ, SLEEP_FUNC, NULL); if (ssc->ses_rqbp != NULL) { ssc->ses_rqpkt = scsi_init_pkt(SES_ROUTE(ssc), NULL, ssc->ses_rqbp, CDB_GROUP0, 1, 0, PKT_CONSISTENT, SLEEP_FUNC, NULL); } if (ssc->ses_rqbp == NULL || ssc->ses_rqpkt == NULL) { ddi_remove_minor_node(dip, NULL); SES_LOG(ssc, CE_NOTE, "scsi_init_pkt of rqbuf failed"); if (ssc->ses_rqbp != NULL) { scsi_free_consistent_buf(ssc->ses_rqbp); ssc->ses_rqbp = NULL; } ddi_soft_state_free(estate, inst); scsi_unprobe(devp); return (DDI_FAILURE); } ssc->ses_rqpkt->pkt_private = (opaque_t)ssc; ssc->ses_rqpkt->pkt_address = *(SES_ROUTE(ssc)); ssc->ses_rqpkt->pkt_comp = ses_callback; ssc->ses_rqpkt->pkt_time = ses_io_time; ssc->ses_rqpkt->pkt_flags = FLAG_NOPARITY|FLAG_NODISCON|FLAG_SENSING; ssc->ses_rqpkt->pkt_cdbp[0] = SCMD_REQUEST_SENSE; ssc->ses_rqpkt->pkt_cdbp[1] = 0; ssc->ses_rqpkt->pkt_cdbp[2] = 0; ssc->ses_rqpkt->pkt_cdbp[3] = 0; ssc->ses_rqpkt->pkt_cdbp[4] = MAX_SENSE_LENGTH; ssc->ses_rqpkt->pkt_cdbp[5] = 0; switch (scsi_ifgetcap(SES_ROUTE(ssc), "auto-rqsense", 1)) { case 1: /* if already set, don't reset it */ ssc->ses_arq = 1; break; case 0: /* try and set it */ ssc->ses_arq = ((scsi_ifsetcap(SES_ROUTE(ssc), "auto-rqsense", 1, 1) == 1) ? 1 : 0); break; default: /* probably undefined, so zero it out */ ssc->ses_arq = 0; break; } ssc->ses_sbufp = getrbuf(KM_SLEEP); cv_init(&ssc->ses_sbufcv, NULL, CV_DRIVER, NULL); /* * If the HBA supports wide, tell it to use wide. */ if (scsi_ifgetcap(SES_ROUTE(ssc), "wide-xfer", 1) != -1) { int wd = ((devp->sd_inq->inq_rdf == RDF_SCSI2) && (devp->sd_inq->inq_wbus16 || devp->sd_inq->inq_wbus32)) ? 1 : 0; (void) scsi_ifsetcap(SES_ROUTE(ssc), "wide-xfer", wd, 1); } /* * Now do ssc init of enclosure specifics. * At the same time, check to make sure getrbuf * actually succeeded. */ if ((*ssc->ses_vec.softc_init)(ssc, 1)) { SES_LOG(ssc, SES_CE_DEBUG3, "failed softc init"); (void) (*ssc->ses_vec.softc_init)(ssc, 0); ddi_remove_minor_node(dip, NULL); scsi_destroy_pkt(ssc->ses_rqpkt); scsi_free_consistent_buf(ssc->ses_rqbp); if (ssc->ses_sbufp) { freerbuf(ssc->ses_sbufp); } cv_destroy(&ssc->ses_sbufcv); ddi_soft_state_free(estate, inst); scsi_unprobe(devp); return (DDI_FAILURE); } /* * create this property so that PM code knows we want * to be suspended at PM time */ (void) ddi_prop_update_string(DDI_DEV_T_NONE, dip, PM_HARDWARE_STATE_PROP, PM_NEEDS_SUSPEND_RESUME); /* announce the existence of this device */ ddi_report_dev(dip); return (DDI_SUCCESS); } /* * Detach ses device. * * XXX: Power management is NOT supported. A token framework * is provided that will need to be extended assuming we have * ses devices we can power down. Currently, we don't have any. */ static int ses_detach(dev_info_t *dip, ddi_detach_cmd_t cmd) { ses_softc_t *ssc; int inst; switch (cmd) { case DDI_DETACH: inst = ddi_get_instance(dip); ssc = ddi_get_soft_state(estate, inst); if (ssc == NULL) { cmn_err(CE_NOTE, "ses%d: DDI_DETACH, no softstate found", inst); return (DDI_FAILURE); } if (ISOPEN(ssc)) { return (DDI_FAILURE); } #if !defined(lint) /* LINTED */ _NOTE(COMPETING_THREADS_NOW); #endif /* !defined(lint) */ if (ssc->ses_vec.softc_init) (void) (*ssc->ses_vec.softc_init)(ssc, 0); #if !defined(lint) _NOTE(NO_COMPETING_THREADS_NOW); #endif /* !defined(lint) */ (void) scsi_ifsetcap(SES_ROUTE(ssc), "auto-rqsense", 1, 0); scsi_destroy_pkt(ssc->ses_rqpkt); scsi_free_consistent_buf(ssc->ses_rqbp); freerbuf(ssc->ses_sbufp); cv_destroy(&ssc->ses_sbufcv); ddi_soft_state_free(estate, inst); ddi_prop_remove_all(dip); ddi_remove_minor_node(dip, NULL); scsi_unprobe(ddi_get_driver_private(dip)); break; case DDI_SUSPEND: inst = ddi_get_instance(dip); if ((ssc = ddi_get_soft_state(estate, inst)) == NULL) { cmn_err(CE_NOTE, "ses%d: DDI_SUSPEND, no softstate found", inst); return (DDI_FAILURE); } /* * If driver idle, accept suspend request. * If it's busy, reject it. This keeps things simple! */ mutex_enter(SES_MUTEX); if (ssc->ses_sbufbsy) { mutex_exit(SES_MUTEX); return (DDI_FAILURE); } ssc->ses_suspended = 1; mutex_exit(SES_MUTEX); break; default: return (DDI_FAILURE); } return (DDI_SUCCESS); } /* ARGSUSED */ static int ses_info(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg, void **result) { dev_t dev; ses_softc_t *ssc; int inst, error; switch (infocmd) { case DDI_INFO_DEVT2DEVINFO: dev = (dev_t)arg; inst = getminor(dev); if ((ssc = ddi_get_soft_state(estate, inst)) == NULL) { return (DDI_FAILURE); } *result = (void *) ssc->ses_devp->sd_dev; error = DDI_SUCCESS; break; case DDI_INFO_DEVT2INSTANCE: dev = (dev_t)arg; inst = getminor(dev); *result = (void *)(uintptr_t)inst; error = DDI_SUCCESS; break; default: error = DDI_FAILURE; } return (error); } /* * Unix Entry Points */ /* ARGSUSED */ static int ses_open(dev_t *dev_p, int flag, int otyp, cred_t *cred_p) { ses_softc_t *ssc; if ((ssc = ddi_get_soft_state(estate, getminor(*dev_p))) == NULL) { return (ENXIO); } /* * If the device is powered down, request it's activation. * If it can't be activated, fail open. */ if (ssc->ses_suspended && ddi_dev_is_needed(SES_DEVINFO(ssc), 0, 1) != DDI_SUCCESS) { return (EIO); } mutex_enter(SES_MUTEX); if (otyp == OTYP_LYR) ssc->ses_lyropen++; else ssc->ses_oflag = 1; ssc->ses_present = (ssc->ses_present)? ssc->ses_present: SES_OPENING; mutex_exit(SES_MUTEX); return (EOK); } /*ARGSUSED*/ static int ses_close(dev_t dev, int flag, int otyp, cred_t *cred_p) { ses_softc_t *ssc; if ((ssc = ddi_get_soft_state(estate, getminor(dev))) == NULL) { return (ENXIO); } if (ssc->ses_suspended) { (void) ddi_dev_is_needed(SES_DEVINFO(ssc), 0, 1); } mutex_enter(SES_MUTEX); if (otyp == OTYP_LYR) ssc->ses_lyropen -= (ssc->ses_lyropen)? 1: 0; else ssc->ses_oflag = 0; mutex_exit(SES_MUTEX); return (0); } /*ARGSUSED3*/ static int ses_ioctl(dev_t dev, int cmd, intptr_t arg, int flg, cred_t *cred_p, int *rvalp) { ses_softc_t *ssc; ses_object k, *up; ses_objarg x; uchar_t t; uchar_t i; int rv = 0; if ((ssc = ddi_get_soft_state(estate, getminor(dev))) == NULL || ssc->ses_present == SES_CLOSED) { return (ENXIO); } switch (cmd) { case SESIOC_GETNOBJ: if (ddi_copyout(&ssc->ses_nobjects, (void *)arg, sizeof (int), flg)) { rv = EFAULT; break; } break; case SESIOC_GETOBJMAP: up = (ses_object *) arg; mutex_enter(SES_MUTEX); for (i = 0; i != ssc->ses_nobjects; i++) { k.obj_id = i; k.subencid = ssc->ses_objmap[i].subenclosure; k.elem_type = ssc->ses_objmap[i].enctype; if (ddi_copyout(&k, up, sizeof (k), flg)) { rv = EFAULT; break; } up++; } mutex_exit(SES_MUTEX); break; case SESIOC_INIT: if (drv_priv(cred_p) != 0) { rv = EPERM; break; } rv = (*ssc->ses_vec.init_enc)(ssc); break; case SESIOC_GETENCSTAT: if ((ssc->ses_encstat & ENCI_SVALID) == 0) { rv = (*ssc->ses_vec.get_encstat)(ssc, KM_SLEEP); if (rv) { break; } } t = ssc->ses_encstat & 0xf; if (ddi_copyout(&t, (void *)arg, sizeof (t), flg)) rv = EFAULT; /* * And always invalidate enclosure status on the way out. */ mutex_enter(SES_MUTEX); ssc->ses_encstat &= ~ENCI_SVALID; mutex_exit(SES_MUTEX); break; case SESIOC_SETENCSTAT: if (drv_priv(cred_p) != 0) { rv = EPERM; break; } if (ddi_copyin((void *)arg, &t, sizeof (t), flg)) rv = EFAULT; else rv = (*ssc->ses_vec.set_encstat)(ssc, t, KM_SLEEP); mutex_enter(SES_MUTEX); ssc->ses_encstat &= ~ENCI_SVALID; mutex_exit(SES_MUTEX); break; case SESIOC_GETOBJSTAT: if (ddi_copyin((void *)arg, &x, sizeof (x), flg)) { rv = EFAULT; break; } if (x.obj_id >= ssc->ses_nobjects) { rv = EINVAL; break; } if ((rv = (*ssc->ses_vec.get_objstat)(ssc, &x, KM_SLEEP)) != 0) break; if (ddi_copyout(&x, (void *)arg, sizeof (x), flg)) rv = EFAULT; else { /* * Now that we no longer poll, svalid never stays true. */ mutex_enter(SES_MUTEX); ssc->ses_objmap[x.obj_id].svalid = 0; mutex_exit(SES_MUTEX); } break; case SESIOC_SETOBJSTAT: if (drv_priv(cred_p) != 0) { rv = EPERM; break; } if (ddi_copyin((void *)arg, &x, sizeof (x), flg)) { rv = EFAULT; break; } if (x.obj_id >= ssc->ses_nobjects) { rv = EINVAL; break; } rv = (*ssc->ses_vec.set_objstat)(ssc, &x, KM_SLEEP); if (rv == 0) { mutex_enter(SES_MUTEX); ssc->ses_objmap[x.obj_id].svalid = 0; mutex_exit(SES_MUTEX); } break; case USCSICMD: if (drv_priv(cred_p) != 0) { rv = EPERM; break; } rv = ses_uscsi_cmd(ssc, (Uscmd *)arg, flg); break; default: rv = ENOTTY; break; } return (rv); } /* * Loop on running a kernel based command * * FIXME: This routine is not really needed. */ int ses_runcmd(ses_softc_t *ssc, Uscmd *lp) { int e; lp->uscsi_status = 0; e = ses_uscsi_cmd(ssc, lp, FKIOCTL); #ifdef not /* * Debug: Nice cross-check code for verifying consistent status. */ if (lp->uscsi_status) { if (lp->uscsi_status == STATUS_CHECK) { SES_LOG(ssc, CE_NOTE, "runcmd%s ASC/ASCQ=0x%x/0x%x>", lp->uscsi_cdb[0], scsi_sname(lp->uscsi_rqbuf[2] & 0xf), lp->uscsi_rqbuf[12] & 0xff, lp->uscsi_rqbuf[13] & 0xff); } else { SES_LOG(ssc, CE_NOTE, "runcmd Status 0x%x", lp->uscsi_cdb[0], lp->uscsi_status); } } #endif /* not */ return (e); } /* * Run a scsi command. */ int ses_uscsi_cmd(ses_softc_t *ssc, Uscmd *Uc, int Uf) { Uscmd *uscmd; struct buf *bp; enum uio_seg uioseg; int err; /* * Grab local 'special' buffer */ mutex_enter(SES_MUTEX); while (ssc->ses_sbufbsy) { cv_wait(&ssc->ses_sbufcv, &ssc->ses_devp->sd_mutex); } ssc->ses_sbufbsy = 1; mutex_exit(SES_MUTEX); /* * If the device is powered down, request it's activation. * This check must be done after setting ses_sbufbsy! */ if (ssc->ses_suspended && ddi_dev_is_needed(SES_DEVINFO(ssc), 0, 1) != DDI_SUCCESS) { mutex_enter(SES_MUTEX); ssc->ses_sbufbsy = 0; mutex_exit(SES_MUTEX); return (EIO); } err = scsi_uscsi_alloc_and_copyin((intptr_t)Uc, Uf, SES_ROUTE(ssc), &uscmd); if (err != 0) { SES_LOG(ssc, SES_CE_DEBUG1, "ses_uscsi_cmd: " "scsi_uscsi_alloc_and_copyin failed\n"); mutex_enter(SES_MUTEX); ssc->ses_sbufbsy = 0; cv_signal(&ssc->ses_sbufcv); mutex_exit(SES_MUTEX); SES_LOG(ssc, SES_CE_DEBUG2, efl, __LINE__); return (err); } /* * Copy the uscsi command related infos to ssc for use in ses_start() * and ses_callback(). */ bcopy(uscmd, &ssc->ses_uscsicmd, sizeof (Uscmd)); if (uscmd->uscsi_cdb != NULL) { bcopy(uscmd->uscsi_cdb, &ssc->ses_srqcdb, (size_t)(uscmd->uscsi_cdblen)); } ssc->ses_uscsicmd.uscsi_status = 0; bp = ssc->ses_sbufp; bp->av_back = (struct buf *)NULL; bp->av_forw = (struct buf *)NULL; bp->b_back = (struct buf *)ssc; bp->b_edev = NODEV; if (uscmd->uscsi_cdb != NULL) { if (uscmd->uscsi_cdblen == CDB_GROUP0) { SES_LOG(ssc, SES_CE_DEBUG7, "scsi_cmd: %x %x %x %x %x %x", ((char *)uscmd->uscsi_cdb)[0], ((char *)uscmd->uscsi_cdb)[1], ((char *)uscmd->uscsi_cdb)[2], ((char *)uscmd->uscsi_cdb)[3], ((char *)uscmd->uscsi_cdb)[4], ((char *)uscmd->uscsi_cdb)[5]); } else { SES_LOG(ssc, SES_CE_DEBUG7, "scsi cmd: %x %x %x %x %x %x %x %x %x %x", ((char *)uscmd->uscsi_cdb)[0], ((char *)uscmd->uscsi_cdb)[1], ((char *)uscmd->uscsi_cdb)[2], ((char *)uscmd->uscsi_cdb)[3], ((char *)uscmd->uscsi_cdb)[4], ((char *)uscmd->uscsi_cdb)[5], ((char *)uscmd->uscsi_cdb)[6], ((char *)uscmd->uscsi_cdb)[7], ((char *)uscmd->uscsi_cdb)[8], ((char *)uscmd->uscsi_cdb)[9]); } } uioseg = (Uf & FKIOCTL) ? UIO_SYSSPACE : UIO_USERSPACE; err = scsi_uscsi_handle_cmd(NODEV, uioseg, uscmd, ses_start, bp, NULL); /* * ses_callback() may set values for ssc->ses_uscsicmd or * ssc->ses_srqsbuf, so copy them back to uscmd. */ if (uscmd->uscsi_rqbuf != NULL) { bcopy(&ssc->ses_srqsbuf, uscmd->uscsi_rqbuf, (size_t)(uscmd->uscsi_rqlen)); uscmd->uscsi_rqresid = ssc->ses_uscsicmd.uscsi_rqresid; } uscmd->uscsi_status = ssc->ses_uscsicmd.uscsi_status; (void) scsi_uscsi_copyout_and_free((intptr_t)Uc, uscmd); mutex_enter(SES_MUTEX); ssc->ses_sbufbsy = 0; cv_signal(&ssc->ses_sbufcv); mutex_exit(SES_MUTEX); return (err); } /* * Command start and done functions. */ static int ses_start(struct buf *bp) { ses_softc_t *ssc = (ses_softc_t *)bp->b_back; SES_LOG(ssc, SES_CE_DEBUG9, "ses_start"); if (!BP_PKT(bp)) { /* * Allocate a packet. */ ses_get_pkt(bp, SLEEP_FUNC); if (!BP_PKT(bp)) { int err; bp->b_resid = bp->b_bcount; if (geterror(bp) == 0) SET_BP_ERROR(bp, EIO); err = geterror(bp); biodone(bp); return (err); } } /* * Initialize the transfer residue, error code, and retry count. */ bp->b_resid = 0; SET_BP_ERROR(bp, 0); #if !defined(lint) _NOTE(NO_COMPETING_THREADS_NOW); #endif /* !defined(lint) */ ssc->ses_retries = ses_retry_count; #if !defined(lint) /* LINTED */ _NOTE(COMPETING_THREADS_NOW); #endif /* !defined(lint) */ SES_LOG(ssc, SES_CE_DEBUG9, "ses_start -> scsi_transport"); switch (scsi_transport(BP_PKT(bp))) { case TRAN_ACCEPT: return (0); /* break; */ case TRAN_BUSY: SES_LOG(ssc, SES_CE_DEBUG2, "ses_start: TRANSPORT BUSY"); SES_ENABLE_RESTART(SES_RESTART_TIME, BP_PKT(bp)); return (0); /* break; */ default: SES_LOG(ssc, SES_CE_DEBUG2, "TRANSPORT ERROR\n"); SET_BP_ERROR(bp, EIO); scsi_destroy_pkt(BP_PKT(bp)); SET_BP_PKT(bp, NULL); biodone(bp); return (EIO); /* break; */ } } static void ses_get_pkt(struct buf *bp, int (*func)()) { ses_softc_t *ssc = (ses_softc_t *)bp->b_back; Uscmd *scmd = &ssc->ses_uscsicmd; struct scsi_pkt *pkt; int stat_size = 1; int flags = 0; if ((scmd->uscsi_flags & USCSI_RQENABLE) && ssc->ses_arq) { if (scmd->uscsi_rqlen > SENSE_LENGTH) { stat_size = (int)(scmd->uscsi_rqlen) + sizeof (struct scsi_arq_status) - sizeof (struct scsi_extended_sense); flags = PKT_XARQ; } else { stat_size = sizeof (struct scsi_arq_status); } } if (bp->b_bcount) { pkt = scsi_init_pkt(SES_ROUTE(ssc), NULL, bp, scmd->uscsi_cdblen, stat_size, 0, flags, func, (caddr_t)ssc); } else { pkt = scsi_init_pkt(SES_ROUTE(ssc), NULL, NULL, scmd->uscsi_cdblen, stat_size, 0, flags, func, (caddr_t)ssc); } SET_BP_PKT(bp, pkt); if (pkt == (struct scsi_pkt *)NULL) return; bcopy(scmd->uscsi_cdb, pkt->pkt_cdbp, (size_t)scmd->uscsi_cdblen); /* Set an upper bound timeout of ses_io_time if zero is passed in */ pkt->pkt_time = (scmd->uscsi_timeout == 0) ? ses_io_time : scmd->uscsi_timeout; pkt->pkt_comp = ses_callback; pkt->pkt_private = (opaque_t)ssc; } /* * Restart ses command. */ static void ses_restart(void *arg) { struct scsi_pkt *pkt = (struct scsi_pkt *)arg; ses_softc_t *ssc = (ses_softc_t *)pkt->pkt_private; struct buf *bp = ssc->ses_sbufp; SES_LOG(ssc, SES_CE_DEBUG9, "ses_restart"); ssc->ses_restart_id = NULL; switch (scsi_transport(pkt)) { case TRAN_ACCEPT: SES_LOG(ssc, SES_CE_DEBUG9, "RESTART %d ok", ssc->ses_retries); return; /* break; */ case TRAN_BUSY: SES_LOG(ssc, SES_CE_DEBUG1, "RESTART %d TRANSPORT BUSY\n", ssc->ses_retries); if (ssc->ses_retries > SES_NO_RETRY) { ssc->ses_retries -= SES_BUSY_RETRY; SES_ENABLE_RESTART(SES_RESTART_TIME, pkt); return; } SET_BP_ERROR(bp, EBUSY); break; default: SET_BP_ERROR(bp, EIO); break; } SES_LOG(ssc, SES_CE_DEBUG1, "RESTART %d TRANSPORT FAILED\n", ssc->ses_retries); pkt = (struct scsi_pkt *)bp->av_back; scsi_destroy_pkt(pkt); bp->b_resid = bp->b_bcount; SET_BP_PKT(bp, NULL); biodone(bp); } /* * Command completion processing */ #define HBA_RESET (STAT_BUS_RESET|STAT_DEV_RESET|STAT_ABORTED) static void ses_callback(struct scsi_pkt *pkt) { ses_softc_t *ssc = (ses_softc_t *)pkt->pkt_private; struct buf *bp; Uscmd *scmd; int err; char action; bp = ssc->ses_sbufp; scmd = &ssc->ses_uscsicmd; /* SES_LOG(ssc, SES_CE_DEBUG9, "ses_callback"); */ /* * Optimization: Normal completion. */ if (pkt->pkt_reason == CMD_CMPLT && !SCBP_C(pkt) && !(pkt->pkt_flags & FLAG_SENSING) && !pkt->pkt_resid) { scsi_destroy_pkt(pkt); SET_BP_PKT(bp, NULL); biodone(bp); return; } /* * Abnormal completion. * * Assume most common error initially. */ err = EIO; action = COMMAND_DONE; if (scmd->uscsi_flags & USCSI_DIAGNOSE) { ssc->ses_retries = SES_NO_RETRY; } CHECK_PKT: if (pkt->pkt_reason != CMD_CMPLT) { /* Process transport errors. */ switch (pkt->pkt_reason) { case CMD_TIMEOUT: /* * If the transport layer didn't clear the problem, * reset the target. */ if (! (pkt->pkt_statistics & HBA_RESET)) { (void) scsi_reset(&pkt->pkt_address, RESET_TARGET); } err = ETIMEDOUT; break; case CMD_INCOMPLETE: case CMD_UNX_BUS_FREE: /* * No response? If probing, give up. * Otherwise, keep trying until retries exhausted. * Then lockdown the driver as the device is * unplugged. */ if (ssc->ses_retries <= SES_NO_RETRY && !(scmd->uscsi_flags & USCSI_DIAGNOSE)) { ssc->ses_present = SES_CLOSED; } /* Inhibit retries to speed probe/attach. */ if (ssc->ses_present < SES_OPEN) { ssc->ses_retries = SES_NO_RETRY; } /* SES_CMD_RETRY4(ssc->ses_retries); */ err = ENXIO; break; case CMD_DATA_OVR: /* * XXX: Some HBA's (e.g. Adaptec 1740 and * earlier ISP revs) report a DATA OVERRUN * error instead of a transfer residue. So, * we convert the error and restart. */ if ((bp->b_bcount - pkt->pkt_resid) > 0) { SES_LOG(ssc, SES_CE_DEBUG6, "ignoring overrun"); pkt->pkt_reason = CMD_CMPLT; err = EOK; goto CHECK_PKT; } ssc->ses_retries = SES_NO_RETRY; /* err = EIO; */ break; case CMD_DMA_DERR: ssc->ses_retries = SES_NO_RETRY; err = EFAULT; break; default: /* err = EIO; */ break; } if (pkt == ssc->ses_rqpkt) { SES_LOG(ssc, CE_WARN, fail_msg, "Request Sense ", scsi_rname(pkt->pkt_reason), (ssc->ses_retries > 0)? "retrying": "giving up"); pkt = (struct scsi_pkt *)bp->av_back; action = QUE_SENSE; } else { SES_LOG(ssc, CE_WARN, fail_msg, "", scsi_rname(pkt->pkt_reason), (ssc->ses_retries > 0)? "retrying": "giving up"); action = QUE_COMMAND; } /* Device exists, allow full error recovery. */ if (ssc->ses_retries > SES_NO_RETRY) { ssc->ses_present = SES_OPEN; } /* * Process status and sense data errors. */ } else { ssc->ses_present = SES_OPEN; action = ses_decode_sense(pkt, &err); } /* * Initiate error recovery action, as needed. */ switch (action) { case QUE_COMMAND_NOW: /* SES_LOG(ssc, SES_CE_DEBUG1, "retrying cmd now"); */ if (ssc->ses_retries > SES_NO_RETRY) { ssc->ses_retries -= SES_CMD_RETRY; scmd->uscsi_status = 0; if (ssc->ses_arq) bzero(pkt->pkt_scbp, sizeof (struct scsi_arq_status)); if (scsi_transport((struct scsi_pkt *)bp->av_back) != TRAN_ACCEPT) { SES_ENABLE_RESTART(SES_RESTART_TIME, (struct scsi_pkt *)bp->av_back); } return; } break; case QUE_COMMAND: SES_LOG(ssc, SES_CE_DEBUG1, "retrying cmd"); if (ssc->ses_retries > SES_NO_RETRY) { ssc->ses_retries -= (err == EBUSY)? SES_BUSY_RETRY: SES_CMD_RETRY; scmd->uscsi_status = 0; if (ssc->ses_arq) bzero(pkt->pkt_scbp, sizeof (struct scsi_arq_status)); SES_ENABLE_RESTART( (err == EBUSY)? SES_BUSY_TIME: SES_RESTART_TIME, (struct scsi_pkt *)bp->av_back); return; } break; case QUE_SENSE: SES_LOG(ssc, SES_CE_DEBUG1, "retrying sense"); if (ssc->ses_retries > SES_NO_RETRY) { ssc->ses_retries -= SES_SENSE_RETRY; scmd->uscsi_status = 0; bzero(&ssc->ses_srqsbuf, MAX_SENSE_LENGTH); if (scsi_transport(ssc->ses_rqpkt) != TRAN_ACCEPT) { SES_ENABLE_RESTART(SES_RESTART_TIME, ssc->ses_rqpkt); } return; } break; case COMMAND_DONE: SES_LOG(ssc, SES_CE_DEBUG4, "cmd done"); pkt = (struct scsi_pkt *)bp->av_back; bp->b_resid = pkt->pkt_resid; if (bp->b_resid) { SES_LOG(ssc, SES_CE_DEBUG6, "transfer residue %ld(%ld)", bp->b_bcount - bp->b_resid, bp->b_bcount); } break; } pkt = (struct scsi_pkt *)bp->av_back; if (err) { SES_LOG(ssc, SES_CE_DEBUG1, "SES: ERROR %d\n", err); SET_BP_ERROR(bp, err); bp->b_resid = bp->b_bcount; } scsi_destroy_pkt(pkt); SET_BP_PKT(bp, NULL); biodone(bp); } /* * Check status and sense data and determine recovery. */ static int ses_decode_sense(struct scsi_pkt *pkt, int *err) { ses_softc_t *ssc = (ses_softc_t *)pkt->pkt_private; struct scsi_extended_sense *sense = (struct scsi_extended_sense *)&ssc->ses_srqsbuf; Uscmd *scmd = &ssc->ses_uscsicmd; char sense_flag = 0; uchar_t status = SCBP_C(pkt) & STATUS_MASK; char *err_action; char action; uchar_t rqlen; int amt; /* * Process manual request sense. * Copy manual request sense to sense buffer. * * This is done if auto request sense is not enabled. * Or the auto request sense failed and the request * sense needs to be retried. */ if (pkt->pkt_flags & FLAG_SENSING) { struct buf *sbp = ssc->ses_rqbp; amt = min(MAX_SENSE_LENGTH, sbp->b_bcount - sbp->b_resid); rqlen = min((uchar_t)amt, scmd->uscsi_rqlen); bcopy(sbp->b_un.b_addr, sense, rqlen); scmd->uscsi_rqresid = scmd->uscsi_rqlen - rqlen; sense_flag = 1; /* * Process auto request sense. * Copy auto request sense to sense buffer. * * If auto request sense failed due to transport error, * retry the command. Otherwise process the status and * sense data. */ } else if (ssc->ses_arq && pkt->pkt_state & STATE_ARQ_DONE) { struct scsi_arq_status *arq = (struct scsi_arq_status *)(pkt->pkt_scbp); uchar_t *arq_status = (uchar_t *)&arq->sts_rqpkt_status; if (pkt->pkt_state & STATE_XARQ_DONE) { amt = MAX_SENSE_LENGTH - arq->sts_rqpkt_resid; } else { if (arq->sts_rqpkt_resid > SENSE_LENGTH) { amt = MAX_SENSE_LENGTH - arq->sts_rqpkt_resid; } else { amt = SENSE_LENGTH - arq->sts_rqpkt_resid; } } if (arq->sts_rqpkt_reason != CMD_CMPLT) { return (QUE_COMMAND); } rqlen = min((uchar_t)amt, scmd->uscsi_rqlen); bcopy(&arq->sts_sensedata, sense, rqlen); scmd->uscsi_status = status; scmd->uscsi_rqresid = scmd->uscsi_rqlen - rqlen; status = *arq_status & STATUS_MASK; pkt->pkt_state &= ~STATE_ARQ_DONE; sense_flag = 1; } /* * Check status of REQUEST SENSE or command. * * If it's not successful, try retrying the original command * and hope that it goes away. If not, we'll eventually run * out of retries and die. */ switch (status) { case STATUS_GOOD: case STATUS_INTERMEDIATE: case STATUS_MET: /* * If the command status is ok, we're done. * Otherwise, examine the request sense data. */ if (! sense_flag) { *err = EOK; return (COMMAND_DONE); } break; case STATUS_CHECK: SES_LOG(ssc, SES_CE_DEBUG3, "status decode: check"); *err = EIO; return (QUE_SENSE); /* break; */ case STATUS_BUSY: SES_LOG(ssc, SES_CE_DEBUG1, "status decode: busy"); /* SES_CMD_RETRY2(ssc->ses_retries); */ *err = EBUSY; return (QUE_COMMAND); /* break; */ case STATUS_RESERVATION_CONFLICT: SES_LOG(ssc, SES_CE_DEBUG1, "status decode: reserved"); *err = EACCES; return (COMMAND_DONE_ERROR); /* break; */ case STATUS_TERMINATED: SES_LOG(ssc, SES_CE_DEBUG1, "status decode: terminated"); *err = ECANCELED; return (COMMAND_DONE_ERROR); /* break; */ default: SES_LOG(ssc, SES_CE_DEBUG1, "status 0x%x", status); *err = EIO; return (QUE_COMMAND); /* break; */ } /* * Check REQUEST SENSE error code. * * Either there's no error, a retryable error, * or it's dead. SES devices aren't very complex. */ err_action = "retrying"; switch (sense->es_key) { case KEY_RECOVERABLE_ERROR: *err = EOK; err_action = "recovered"; action = COMMAND_DONE; break; case KEY_UNIT_ATTENTION: /* * This is common for RAID! */ /* *err = EIO; */ SES_CMD_RETRY1(ssc->ses_retries); action = QUE_COMMAND_NOW; break; case KEY_NOT_READY: case KEY_NO_SENSE: /* *err = EIO; */ action = QUE_COMMAND; break; default: /* *err = EIO; */ err_action = "fatal"; action = COMMAND_DONE_ERROR; break; } SES_LOG(ssc, SES_CE_DEBUG1, "cdb[0]= 0x%x %s, key=0x%x, ASC/ASCQ=0x%x/0x%x", scmd->uscsi_cdb[0], err_action, sense->es_key, sense->es_add_code, sense->es_qual_code); #ifdef not /* * Dump cdb and sense data stat's for manufacturing. */ if (DEBUGGING_ERR || sd_error_level == SDERR_ALL) { auto buf[128]; p = pkt->pkt_cdbp; if ((j = scsi_cdb_size[CDB_GROUPID(*p)]) == 0) j = CDB_SIZE; /* Print cdb */ (void) sprintf(buf, "cmd:"); for (i = 0; i < j; i++) { (void) sprintf(&buf[strlen(buf)], hex, (uchar_t)*p++); } SES_LOG(ssc, SES_CE_DEBUG3, "%s", buf); /* Suppress trailing zero's in sense data */ if (amt > 3) { p = (char *)devp->sd_sense + amt; for (j = amt; j > 3; j--) { if (*(--p)) break; } } else { j = amt; } /* Print sense data. */ (void) sprintf(buf, "sense:"); p = (char *)devp->sd_sense; for (i = 0; i < j; i++) { (void) sprintf(&buf[strlen(buf)], hex, (uchar_t)*p++); } SES_LOG(ssc, SES_CE_DEBUG3, "%s", buf); } #endif /* not */ return (action); } /*PRINTFLIKE3*/ void ses_log(ses_softc_t *ssc, int level, const char *fmt, ...) { va_list ap; char buf[256]; va_start(ap, fmt); (void) vsprintf(buf, fmt, ap); va_end(ap); if (ssc == (ses_softc_t *)NULL) { switch (level) { case SES_CE_DEBUG1: if (ses_debug > 1) cmn_err(CE_NOTE, "%s", buf); break; case SES_CE_DEBUG2: if (ses_debug > 2) cmn_err(CE_NOTE, "%s", buf); break; case SES_CE_DEBUG3: if (ses_debug > 3) cmn_err(CE_NOTE, "%s", buf); break; case SES_CE_DEBUG4: if (ses_debug > 4) cmn_err(CE_NOTE, "%s", buf); break; case SES_CE_DEBUG5: if (ses_debug > 5) cmn_err(CE_NOTE, "%s", buf); break; case SES_CE_DEBUG6: if (ses_debug > 6) cmn_err(CE_NOTE, "%s", buf); break; case SES_CE_DEBUG7: if (ses_debug > 7) cmn_err(CE_NOTE, "%s", buf); break; case SES_CE_DEBUG8: if (ses_debug > 8) cmn_err(CE_NOTE, "%s", buf); break; case SES_CE_DEBUG9: if (ses_debug > 9) cmn_err(CE_NOTE, "%s", buf); break; case CE_NOTE: case CE_WARN: case CE_PANIC: cmn_err(level, "%s", buf); break; case SES_CE_DEBUG: default: cmn_err(CE_NOTE, "%s", buf); break; } return; } switch (level) { case CE_CONT: case CE_NOTE: case CE_WARN: case CE_PANIC: scsi_log(SES_DEVINFO(ssc), (char *)Snm, level, Str, buf); break; case SES_CE_DEBUG1: if (ses_debug > 1) scsi_log(SES_DEVINFO(ssc), (char *)Snm, SCSI_DEBUG, Str, buf); break; case SES_CE_DEBUG2: if (ses_debug > 2) scsi_log(SES_DEVINFO(ssc), (char *)Snm, SCSI_DEBUG, Str, buf); break; case SES_CE_DEBUG3: if (ses_debug > 3) scsi_log(SES_DEVINFO(ssc), (char *)Snm, SCSI_DEBUG, Str, buf); break; case SES_CE_DEBUG4: if (ses_debug > 4) scsi_log(SES_DEVINFO(ssc), (char *)Snm, SCSI_DEBUG, Str, buf); break; case SES_CE_DEBUG5: if (ses_debug > 5) scsi_log(SES_DEVINFO(ssc), (char *)Snm, SCSI_DEBUG, Str, buf); break; case SES_CE_DEBUG6: if (ses_debug > 6) scsi_log(SES_DEVINFO(ssc), (char *)Snm, SCSI_DEBUG, Str, buf); break; case SES_CE_DEBUG7: if (ses_debug > 7) scsi_log(SES_DEVINFO(ssc), (char *)Snm, SCSI_DEBUG, Str, buf); break; case SES_CE_DEBUG8: if (ses_debug > 8) scsi_log(SES_DEVINFO(ssc), (char *)Snm, SCSI_DEBUG, Str, buf); break; case SES_CE_DEBUG9: if (ses_debug > 9) scsi_log(SES_DEVINFO(ssc), (char *)Snm, SCSI_DEBUG, Str, buf); break; case SES_CE_DEBUG: default: scsi_log(SES_DEVINFO(ssc), (char *)Snm, SCSI_DEBUG, Str, buf); break; } } /* * mode: c * Local variables: * c-indent-level: 8 * c-brace-imaginary-offset: 0 * c-brace-offset: -8 * c-argdecl-indent: 8 * c-label-offset: -8 * c-continued-statement-offset: 8 * c-continued-brace-offset: 0 * End: */