/* * Copyright 2008 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ /* * Copyright (c) 2001 Atsushi Onoe * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef _SYS_NET80211_IMPL_H #define _SYS_NET80211_IMPL_H #include #include #include #include #include #include /* * IEEE802.11 kernel support module */ #ifdef __cplusplus extern "C" { #endif #define IEEE80211_TXPOWER_MAX 100 /* .5 dbM */ #define IEEE80211_TXPOWER_MIN 0 /* kill radio */ #define IEEE80211_DTIM_MAX 15 /* max DTIM period */ #define IEEE80211_DTIM_MIN 1 /* min DTIM period */ #define IEEE80211_DTIM_DEFAULT 1 /* default DTIM period */ /* NB: min+max come from WiFi requirements */ #define IEEE80211_BINTVAL_MAX 1000 /* max beacon interval (TU's) */ #define IEEE80211_BINTVAL_MIN 25 /* min beacon interval (TU's) */ #define IEEE80211_BINTVAL_DEFAULT 100 /* default beacon interval (TU's) */ #define IEEE80211_BMISS_MAX 2 /* maximum consecutive bmiss allowed */ #define IEEE80211_SWBMISS_THRESHOLD 50 /* s/w bmiss threshold (TU's) */ #define IEEE80211_HWBMISS_DEFAULT 7 /* h/w bmiss threshold (beacons) */ #define IEEE80211_PS_SLEEP 0x1 /* STA is in power saving mode */ #define IEEE80211_PS_MAX_QUEUE 50 /* maximum saved packets */ #define IEEE80211_RTS_DEFAULT IEEE80211_RTS_MAX #define IEEE80211_FRAG_DEFAULT IEEE80211_FRAG_MAX /* * The RSSI values of two node are taken as almost the same when * the difference between these two node's RSSI values is within * IEEE80211_RSSI_CMP_THRESHOLD */ #define IEEE80211_RSSI_CMP_THRESHOLD 5 /* * Each ieee80211com instance has a single timer that fires once a * second. This is used to initiate various work depending on the * state of the instance: scanning (passive or active), ``transition'' * (waiting for a response to a management frame when operating * as a station), and node inactivity processing (when operating * as an AP). For inactivity processing each node has a timeout * set in it's in_inact field that is decremented on each timeout * and the node is reclaimed when the counter goes to zero. We * use different inactivity timeout values depending on whether * the node is associated and authorized (either by 802.1x or * open/shared key authentication) or associated but yet to be * authorized. The latter timeout is shorter to more aggressively * reclaim nodes that leave part way through the 802.1x exchange. * * IEEE80211_INACT_WAIT defines node table's inactivity interval in * seconds. On timeout, node table's registered nt_timeout callback * function is executed. Each node in the node table has a timeout * set in its in_inact field with IEEE80211_INACT_. In * nt_timeout function, node table is iterated and each node's * in_inact is decremented. So IEEE80211_INACT_ is defined in * the form [inact_sec]/IEEE80211_INACT_WAIT. * */ #define IEEE80211_INACT_WAIT 15 /* inactivity interval (secs) */ #define IEEE80211_INACT_INIT (30/IEEE80211_INACT_WAIT) /* initial */ #define IEEE80211_INACT_ASSOC (180/IEEE80211_INACT_WAIT) /* associated but not authorized */ #define IEEE80211_INACT_RUN (300/IEEE80211_INACT_WAIT) /* authorized */ #define IEEE80211_INACT_PROBE (30/IEEE80211_INACT_WAIT) /* probe */ #define IEEE80211_INACT_SCAN (300/IEEE80211_INACT_WAIT) /* scanned */ #define IEEE80211_TRANS_WAIT 5 /* mgt frame tx timer (secs) */ /* * Useful combinations of channel characteristics. */ #define IEEE80211_CHAN_FHSS \ (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_GFSK) #define IEEE80211_CHAN_A \ (IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_OFDM) #define IEEE80211_CHAN_B \ (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_CCK) #define IEEE80211_CHAN_PUREG \ (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_OFDM) #define IEEE80211_CHAN_G \ (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_DYN) #define IEEE80211_CHAN_T \ (IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_TURBO) #define IEEE80211_CHAN_108G \ (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_TURBO) #define IEEE80211_CHAN_ALL \ (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_GFSK | \ IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_DYN) #define IEEE80211_CHAN_ALLTURBO \ (IEEE80211_CHAN_ALL | IEEE80211_CHAN_TURBO) #define IEEE80211_IS_CHAN_FHSS(_c) \ (((_c)->ich_flags & IEEE80211_CHAN_FHSS) == IEEE80211_CHAN_FHSS) #define IEEE80211_IS_CHAN_A(_c) \ (((_c)->ich_flags & IEEE80211_CHAN_A) == IEEE80211_CHAN_A) #define IEEE80211_IS_CHAN_B(_c) \ (((_c)->ich_flags & IEEE80211_CHAN_B) == IEEE80211_CHAN_B) #define IEEE80211_IS_CHAN_PUREG(_c) \ (((_c)->ich_flags & IEEE80211_CHAN_PUREG) == IEEE80211_CHAN_PUREG) #define IEEE80211_IS_CHAN_G(_c) \ (((_c)->ich_flags & IEEE80211_CHAN_G) == IEEE80211_CHAN_G) #define IEEE80211_IS_CHAN_ANYG(_c) \ (IEEE80211_IS_CHAN_PUREG(_c) || IEEE80211_IS_CHAN_G(_c)) #define IEEE80211_IS_CHAN_T(_c) \ (((_c)->ich_flags & IEEE80211_CHAN_T) == IEEE80211_CHAN_T) #define IEEE80211_IS_CHAN_108G(_c) \ (((_c)->ich_flags & IEEE80211_CHAN_108G) == IEEE80211_CHAN_108G) #define IEEE80211_IS_CHAN_OFDM(_c) \ ((_c)->ich_flags & IEEE80211_CHAN_OFDM) #define IEEE80211_IS_CHAN_CCK(_c) \ ((_c)->ich_flags & IEEE80211_CHAN_CCK) #define IEEE80211_IS_CHAN_GFSK(_c) \ ((_c)->ich_flags & IEEE80211_CHAN_GFSK) #define IEEE80211_IS_CHAN_PASSIVE(_c) \ ((_c)->ich_flags & IEEE80211_CHAN_PASSIVE) /* ni_chan encoding for FH phy */ #define IEEE80211_FH_CHANMOD 80 #define IEEE80211_FH_CHAN(set, pat) \ (((set) - 1) * IEEE80211_FH_CHANMOD + (pat)) #define IEEE80211_FH_CHANSET(chan) \ ((chan) / IEEE80211_FH_CHANMOD + 1) #define IEEE80211_FH_CHANPAT(chan) \ ((chan) % IEEE80211_FH_CHANMOD) #define IEEE80211_NODE_AUTH 0x0001 /* authorized for data */ #define IEEE80211_NODE_QOS 0x0002 /* QoS enabled */ #define IEEE80211_NODE_ERP 0x0004 /* ERP enabled */ #define IEEE80211_NODE_PWR_MGT 0x0010 /* power save mode enabled */ #define IEEE80211_NODE_AREF 0x0020 /* authentication ref held */ #define IEEE80211_MAXRSSI 127 /* Debug Flags */ #define IEEE80211_MSG_BRUSSELS 0x80000000 /* BRUSSELS */ #define IEEE80211_MSG_DEBUG 0x40000000 /* IFF_DEBUG equivalent */ #define IEEE80211_MSG_DUMPPKTS 0x20000000 /* IFF_LINK2 equivalant */ #define IEEE80211_MSG_CRYPTO 0x10000000 /* crypto work */ #define IEEE80211_MSG_INPUT 0x08000000 /* input handling */ #define IEEE80211_MSG_XRATE 0x04000000 /* rate set handling */ #define IEEE80211_MSG_ELEMID 0x02000000 /* element id parsing */ #define IEEE80211_MSG_NODE 0x01000000 /* node handling */ #define IEEE80211_MSG_ASSOC 0x00800000 /* association handling */ #define IEEE80211_MSG_AUTH 0x00400000 /* authentication handling */ #define IEEE80211_MSG_SCAN 0x00200000 /* scanning */ #define IEEE80211_MSG_OUTPUT 0x00100000 /* output handling */ #define IEEE80211_MSG_STATE 0x00080000 /* state machine */ #define IEEE80211_MSG_POWER 0x00040000 /* power save handling */ #define IEEE80211_MSG_DOT1X 0x00020000 /* 802.1x authenticator */ #define IEEE80211_MSG_DOT1XSM 0x00010000 /* 802.1x state machine */ #define IEEE80211_MSG_RADIUS 0x00008000 /* 802.1x radius client */ #define IEEE80211_MSG_RADDUMP 0x00004000 /* dump 802.1x radius packets */ #define IEEE80211_MSG_RADKEYS 0x00002000 /* dump 802.1x keys */ #define IEEE80211_MSG_WPA 0x00001000 /* WPA/RSN protocol */ #define IEEE80211_MSG_ACL 0x00000800 /* ACL handling */ #define IEEE80211_MSG_WME 0x00000400 /* WME protocol */ #define IEEE80211_MSG_SUPERG 0x00000200 /* Atheros SuperG protocol */ #define IEEE80211_MSG_DOTH 0x00000100 /* 802.11h support */ #define IEEE80211_MSG_INACT 0x00000080 /* inactivity handling */ #define IEEE80211_MSG_ROAM 0x00000040 /* sta-mode roaming */ #define IEEE80211_MSG_CONFIG 0x00000020 /* wificonfig/dladm */ #define IEEE80211_MSG_ANY 0xffffffff /* anything */ /* Error flags returned by ieee80211_match_bss */ #define IEEE80211_BADCHAN 0x01 #define IEEE80211_BADOPMODE 0x02 #define IEEE80211_BADPRIVACY 0x04 #define IEEE80211_BADRATE 0x08 #define IEEE80211_BADESSID 0x10 #define IEEE80211_BADBSSID 0x20 #define IEEE80211_NODEFAIL 0x40 typedef struct ieee80211_impl { struct ieee80211com *ic; uint8_t im_chan_avail[IEEE80211_CHAN_BYTES]; uint8_t im_chan_scan[IEEE80211_CHAN_BYTES]; uint8_t im_bmiss_count; /* current beacon miss count */ int32_t im_bmiss_max; /* max bmiss before scan */ timeout_id_t im_swbmiss; uint16_t im_swbmiss_count; /* beacons in last period */ uint16_t im_swbmiss_period; /* s/w bmiss period */ int32_t im_mgt_timer; /* mgmt timeout, secs */ int32_t im_inact_timer; /* inactivity timer wait, sec */ int32_t im_inact_init; /* initial setting */ int32_t im_inact_assoc; /* assoc but not authorized */ int32_t im_inact_run; /* authorized setting */ int32_t im_inact_probe; /* inactive probe time */ kcondvar_t im_scan_cv; /* wait scan complete */ } ieee80211_impl_t; /* * Parameters supplied when adding/updating an entry in a * scan cache. Pointer variables should be set to NULL * if no data is available. Pointer references can be to * local data; any information that is saved will be copied. * All multi-byte values must be in host byte order. */ struct ieee80211_scanparams { uint16_t capinfo; /* 802.11 capabilities */ enum ieee80211_phytype phytype; uint16_t fhdwell; /* FHSS dwell interval */ uint8_t chan; uint8_t bchan; uint8_t fhindex; uint8_t erp; uint16_t bintval; uint8_t timoff; uint8_t *tim; uint8_t *tstamp; uint8_t *country; uint8_t *ssid; uint8_t *rates; uint8_t *xrates; uint8_t *wpa; uint8_t *wme; }; #define IEEE80211_SEND_MGMT(_ic, _in, _type, _arg) \ ((*(_ic)->ic_send_mgmt)((_ic), (_in), (_type), (_arg))) /* Verify the existence and length of __elem or get out. */ #define IEEE80211_VERIFY_ELEMENT(__elem, __maxlen, __func) do { \ _NOTE(CONSTCOND) \ if ((__elem) == NULL) { \ ieee80211_err("ieee80211: no #__elem \n"); \ __func; \ } \ if ((__elem)[1] > (__maxlen)) { \ ieee80211_err("ieee80211: bad "#__elem " len %d\n", \ (__elem)[1]); \ __func; \ } \ _NOTE(CONSTCOND) \ } while (0) #define IEEE80211_VERIFY_LENGTH(_len, _minlen, _func) do { \ _NOTE(CONSTCOND) \ if ((_len) < (_minlen)) { \ ieee80211_dbg(IEEE80211_MSG_ELEMID, \ "ie of type %s too short", \ ieee80211_mgt_subtype_name[subtype >> \ IEEE80211_FC0_SUBTYPE_SHIFT]); \ _func; \ } \ _NOTE(CONSTCOND) \ } while (0) #define IEEE80211_VERIFY_SSID(_in, _ssid, _func) do { \ _NOTE(CONSTCOND) \ ASSERT((_in) != NULL); \ if ((_ssid)[1] != 0 && \ ((_ssid)[1] != (_in)->in_esslen || \ bcmp((_ssid) + 2, (_in)->in_essid, (_ssid)[1]) != 0)) { \ _func; \ } \ _NOTE(CONSTCOND) \ } while (0) #define ieee80211_setbit(a, i) ((a)[(i)/NBBY] |= (1 << ((i)%NBBY))) #define ieee80211_clrbit(a, i) ((a)[(i)/NBBY] &= ~(1 << ((i)%NBBY))) #define ieee80211_isset(a, i) ((a)[(i)/NBBY] & (1 << ((i)%NBBY))) #define ieee80211_isclr(a, i) (!((a)[(i)/NBBY] & (1 << ((i)%NBBY)))) #define IEEE80211_N(a) (sizeof (a) / sizeof (a[0])) #define IEEE80211_LOCK(_ic) \ mutex_enter(&(_ic)->ic_genlock) #define IEEE80211_UNLOCK(_ic) \ mutex_exit(&(_ic)->ic_genlock) #define IEEE80211_IS_LOCKED(_ic) \ mutex_owned(&(_ic)->ic_genlock) #define IEEE80211_LOCK_ASSERT(_ic) \ ASSERT(mutex_owned(&(_ic)->ic_genlock)) #define IEEE80211_NODE_LOCK(_nt) \ mutex_enter(&(_nt)->nt_nodelock) #define IEEE80211_NODE_UNLOCK(_nt) \ mutex_exit(&(_nt)->nt_nodelock) #define IEEE80211_NODE_IS_LOCKED(_nt) \ mutex_owned(&(_nt)->nt_nodelock) #define IEEE80211_NODE_LOCK_ASSERT(_nt) \ ASSERT(mutex_owned(&(_nt)->nt_nodelock)) #define ieee80211_node_hash(addr) \ (((uint8_t *)(addr))[IEEE80211_ADDR_LEN - 1] % IEEE80211_NODE_HASHSIZE) #define IEEE80211_SCAN_LOCK(_nt) mutex_enter(&(_nt)->nt_scanlock) #define IEEE80211_SCAN_UNLOCK(_nt) mutex_exit(&(_nt)->nt_scanlock) #define IEEE80211_RV(v) ((v) & IEEE80211_RATE_VAL) #define IEEE80211_SUBTYPE_NAME(subtype) \ ieee80211_mgt_subtype_name[(subtype) >> IEEE80211_FC0_SUBTYPE_SHIFT] extern const char *ieee80211_mgt_subtype_name[]; extern const char *ieee80211_phymode_name[]; void ieee80211_err(const int8_t *, ...); void ieee80211_dbg(uint32_t, const int8_t *, ...); int ieee80211_hdrspace(const void *); void ieee80211_notify(ieee80211com_t *, wpa_event_type); void ieee80211_mac_update(ieee80211com_t *); uint64_t ieee80211_read_6(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t); /* node */ void ieee80211_node_attach(ieee80211com_t *); void ieee80211_node_lateattach(ieee80211com_t *); void ieee80211_node_detach(ieee80211com_t *); void ieee80211_reset_bss(ieee80211com_t *); void ieee80211_cancel_scan(ieee80211com_t *); void ieee80211_add_scan(ieee80211com_t *, const struct ieee80211_scanparams *, const struct ieee80211_frame *, int, int, int); void ieee80211_init_neighbor(ieee80211_node_t *, const struct ieee80211_frame *, const struct ieee80211_scanparams *); ieee80211_node_t *ieee80211_add_neighbor(ieee80211com_t *, const struct ieee80211_frame *, const struct ieee80211_scanparams *); void ieee80211_create_ibss(ieee80211com_t *, struct ieee80211_channel *); ieee80211_node_t *ieee80211_fakeup_adhoc_node(ieee80211_node_table_t *, const uint8_t *); ieee80211_node_t *ieee80211_tmp_node(ieee80211com_t *, const uint8_t *); /* proto */ void ieee80211_proto_attach(ieee80211com_t *); int ieee80211_fix_rate(ieee80211_node_t *, int); void ieee80211_setbasicrates(struct ieee80211_rateset *, enum ieee80211_phymode); void ieee80211_reset_erp(ieee80211com_t *); void ieee80211_set_shortslottime(ieee80211com_t *, boolean_t); /* input */ int ieee80211_setup_rates(ieee80211_node_t *, const uint8_t *, const uint8_t *, int); void ieee80211_recv_mgmt(ieee80211com_t *, mblk_t *, ieee80211_node_t *, int, int, uint32_t); /* output */ int ieee80211_send_probereq(ieee80211_node_t *, const uint8_t *, const uint8_t *, const uint8_t *, const uint8_t *, size_t, const void *, size_t); int ieee80211_send_mgmt(ieee80211com_t *, ieee80211_node_t *, int, int); int ieee80211_send_nulldata(ieee80211_node_t *); /* crypto */ struct ieee80211_key *ieee80211_crypto_getkey(ieee80211com_t *); uint8_t ieee80211_crypto_getciphertype(ieee80211com_t *); /* generic */ mblk_t *ieee80211_getmgtframe(uint8_t **, int); void ieee80211_notify_node_join(ieee80211com_t *, ieee80211_node_t *); void ieee80211_notify_node_leave(ieee80211com_t *, ieee80211_node_t *); #ifdef __cplusplus } #endif #endif /* _SYS_NET80211_IMPL_H */