/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2009 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ /* * - General Introduction: * * This file contains the implementation of the MAC client kernel * API and related code. The MAC client API allows a kernel module * to gain access to a MAC instance (physical NIC, link aggregation, etc). * It allows a MAC client to associate itself with a MAC address, * VLANs, callback functions for data traffic and for promiscuous mode. * The MAC client API is also used to specify the properties associated * with a MAC client, such as bandwidth limits, priority, CPUS, etc. * These properties are further used to determine the hardware resources * to allocate to the various MAC clients. * * - Primary MAC clients: * * The MAC client API refers to "primary MAC clients". A primary MAC * client is a client which "owns" the primary MAC address of * the underlying MAC instance. The primary MAC address is called out * since it is associated with specific semantics: the primary MAC * address is the MAC address which is assigned to the IP interface * when it is plumbed, and the primary MAC address is assigned * to VLAN data-links. The primary address of a MAC instance can * also change dynamically from under the MAC client, for example * as a result of a change of state of a link aggregation. In that * case the MAC layer automatically updates all data-structures which * refer to the current value of the primary MAC address. Typical * primary MAC clients are dls, aggr, and xnb. A typical non-primary * MAC client is the vnic driver. * * - Virtual Switching: * * The MAC layer implements a virtual switch between the MAC clients * (primary and non-primary) defined on top of the same underlying * NIC (physical, link aggregation, etc). The virtual switch is * VLAN-aware, i.e. it allows multiple MAC clients to be member * of one or more VLANs, and the virtual switch will distribute * multicast tagged packets only to the member of the corresponding * VLANs. * * - Upper vs Lower MAC: * * Creating a VNIC on top of a MAC instance effectively causes * two MAC instances to be layered on top of each other, one for * the VNIC(s), one for the underlying MAC instance (physical NIC, * link aggregation, etc). In the code below we refer to the * underlying NIC as the "lower MAC", and we refer to VNICs as * the "upper MAC". * * - Pass-through for VNICs: * * When VNICs are created on top of an underlying MAC, this causes * a layering of two MAC instances. Since the lower MAC already * does the switching and demultiplexing to its MAC clients, the * upper MAC would simply have to pass packets to the layer below * or above it, which would introduce overhead. In order to avoid * this overhead, the MAC layer implements a pass-through mechanism * for VNICs. When a VNIC opens the lower MAC instance, it saves * the MAC client handle it optains from the MAC layer. When a MAC * client opens a VNIC (upper MAC), the MAC layer detects that * the MAC being opened is a VNIC, and gets the MAC client handle * that the VNIC driver obtained from the lower MAC. This exchange * is doing through a private capability between the MAC layer * and the VNIC driver. The upper MAC then returns that handle * directly to its MAC client. Any operation done by the upper * MAC client is now done on the lower MAC client handle, which * allows the VNIC driver to be completely bypassed for the * performance sensitive data-path. * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include kmem_cache_t *mac_client_impl_cache; kmem_cache_t *mac_promisc_impl_cache; static boolean_t mac_client_single_rcvr(mac_client_impl_t *); static flow_entry_t *mac_client_swap_mciflent(mac_client_impl_t *); static flow_entry_t *mac_client_get_flow(mac_client_impl_t *, mac_unicast_impl_t *); static void mac_client_remove_flow_from_list(mac_client_impl_t *, flow_entry_t *); static void mac_client_add_to_flow_list(mac_client_impl_t *, flow_entry_t *); static void mac_rename_flow_names(mac_client_impl_t *, const char *); static void mac_virtual_link_update(mac_impl_t *); /* ARGSUSED */ static int i_mac_client_impl_ctor(void *buf, void *arg, int kmflag) { int i; mac_client_impl_t *mcip = buf; bzero(buf, MAC_CLIENT_IMPL_SIZE); mutex_init(&mcip->mci_tx_cb_lock, NULL, MUTEX_DRIVER, NULL); mcip->mci_tx_notify_cb_info.mcbi_lockp = &mcip->mci_tx_cb_lock; ASSERT(mac_tx_percpu_cnt >= 0); for (i = 0; i <= mac_tx_percpu_cnt; i++) { mutex_init(&mcip->mci_tx_pcpu[i].pcpu_tx_lock, NULL, MUTEX_DRIVER, NULL); } cv_init(&mcip->mci_tx_cv, NULL, CV_DRIVER, NULL); return (0); } /* ARGSUSED */ static void i_mac_client_impl_dtor(void *buf, void *arg) { int i; mac_client_impl_t *mcip = buf; ASSERT(mcip->mci_promisc_list == NULL); ASSERT(mcip->mci_unicast_list == NULL); ASSERT(mcip->mci_state_flags == 0); ASSERT(mcip->mci_tx_flag == 0); mutex_destroy(&mcip->mci_tx_cb_lock); ASSERT(mac_tx_percpu_cnt >= 0); for (i = 0; i <= mac_tx_percpu_cnt; i++) { ASSERT(mcip->mci_tx_pcpu[i].pcpu_tx_refcnt == 0); mutex_destroy(&mcip->mci_tx_pcpu[i].pcpu_tx_lock); } cv_destroy(&mcip->mci_tx_cv); } /* ARGSUSED */ static int i_mac_promisc_impl_ctor(void *buf, void *arg, int kmflag) { mac_promisc_impl_t *mpip = buf; bzero(buf, sizeof (mac_promisc_impl_t)); mpip->mpi_mci_link.mcb_objp = buf; mpip->mpi_mci_link.mcb_objsize = sizeof (mac_promisc_impl_t); mpip->mpi_mi_link.mcb_objp = buf; mpip->mpi_mi_link.mcb_objsize = sizeof (mac_promisc_impl_t); return (0); } /* ARGSUSED */ static void i_mac_promisc_impl_dtor(void *buf, void *arg) { mac_promisc_impl_t *mpip = buf; ASSERT(mpip->mpi_mci_link.mcb_objp != NULL); ASSERT(mpip->mpi_mci_link.mcb_objsize == sizeof (mac_promisc_impl_t)); ASSERT(mpip->mpi_mi_link.mcb_objp == mpip->mpi_mci_link.mcb_objp); ASSERT(mpip->mpi_mi_link.mcb_objsize == sizeof (mac_promisc_impl_t)); mpip->mpi_mci_link.mcb_objp = NULL; mpip->mpi_mci_link.mcb_objsize = 0; mpip->mpi_mi_link.mcb_objp = NULL; mpip->mpi_mi_link.mcb_objsize = 0; ASSERT(mpip->mpi_mci_link.mcb_flags == 0); mpip->mpi_mci_link.mcb_objsize = 0; } void mac_client_init(void) { ASSERT(mac_tx_percpu_cnt >= 0); mac_client_impl_cache = kmem_cache_create("mac_client_impl_cache", MAC_CLIENT_IMPL_SIZE, 0, i_mac_client_impl_ctor, i_mac_client_impl_dtor, NULL, NULL, NULL, 0); ASSERT(mac_client_impl_cache != NULL); mac_promisc_impl_cache = kmem_cache_create("mac_promisc_impl_cache", sizeof (mac_promisc_impl_t), 0, i_mac_promisc_impl_ctor, i_mac_promisc_impl_dtor, NULL, NULL, NULL, 0); ASSERT(mac_promisc_impl_cache != NULL); } void mac_client_fini(void) { kmem_cache_destroy(mac_client_impl_cache); kmem_cache_destroy(mac_promisc_impl_cache); } /* * Return the lower MAC client handle from the VNIC driver for the * specified VNIC MAC instance. */ mac_client_impl_t * mac_vnic_lower(mac_impl_t *mip) { mac_capab_vnic_t cap; mac_client_impl_t *mcip; VERIFY(i_mac_capab_get((mac_handle_t)mip, MAC_CAPAB_VNIC, &cap)); mcip = cap.mcv_mac_client_handle(cap.mcv_arg); return (mcip); } /* * Return the MAC client handle of the primary MAC client for the * specified MAC instance, or NULL otherwise. */ mac_client_impl_t * mac_primary_client_handle(mac_impl_t *mip) { mac_client_impl_t *mcip; if (mip->mi_state_flags & MIS_IS_VNIC) return (mac_vnic_lower(mip)); ASSERT(MAC_PERIM_HELD((mac_handle_t)mip)); for (mcip = mip->mi_clients_list; mcip != NULL; mcip = mcip->mci_client_next) { if (MCIP_DATAPATH_SETUP(mcip) && mac_is_primary_client(mcip)) return (mcip); } return (NULL); } /* * Open a MAC specified by its MAC name. */ int mac_open(const char *macname, mac_handle_t *mhp) { mac_impl_t *mip; int err; /* * Look up its entry in the global hash table. */ if ((err = mac_hold(macname, &mip)) != 0) return (err); /* * Hold the dip associated to the MAC to prevent it from being * detached. For a softmac, its underlying dip is held by the * mi_open() callback. * * This is done to be more tolerant with some defective drivers, * which incorrectly handle mac_unregister() failure in their * xxx_detach() routine. For example, some drivers ignore the * failure of mac_unregister() and free all resources that * that are needed for data transmition. */ e_ddi_hold_devi(mip->mi_dip); if (!(mip->mi_callbacks->mc_callbacks & MC_OPEN)) { *mhp = (mac_handle_t)mip; return (0); } /* * The mac perimeter is used in both mac_open and mac_close by the * framework to single thread the MC_OPEN/MC_CLOSE of drivers. */ i_mac_perim_enter(mip); mip->mi_oref++; if (mip->mi_oref != 1 || ((err = mip->mi_open(mip->mi_driver)) == 0)) { *mhp = (mac_handle_t)mip; i_mac_perim_exit(mip); return (0); } mip->mi_oref--; ddi_release_devi(mip->mi_dip); mac_rele(mip); i_mac_perim_exit(mip); return (err); } /* * Open a MAC specified by its linkid. */ int mac_open_by_linkid(datalink_id_t linkid, mac_handle_t *mhp) { dls_dl_handle_t dlh; int err; if ((err = dls_devnet_hold_tmp(linkid, &dlh)) != 0) return (err); dls_devnet_prop_task_wait(dlh); err = mac_open(dls_devnet_mac(dlh), mhp); dls_devnet_rele_tmp(dlh); return (err); } /* * Open a MAC specified by its link name. */ int mac_open_by_linkname(const char *link, mac_handle_t *mhp) { datalink_id_t linkid; int err; if ((err = dls_mgmt_get_linkid(link, &linkid)) != 0) return (err); return (mac_open_by_linkid(linkid, mhp)); } /* * Close the specified MAC. */ void mac_close(mac_handle_t mh) { mac_impl_t *mip = (mac_impl_t *)mh; i_mac_perim_enter(mip); /* * The mac perimeter is used in both mac_open and mac_close by the * framework to single thread the MC_OPEN/MC_CLOSE of drivers. */ if (mip->mi_callbacks->mc_callbacks & MC_OPEN) { ASSERT(mip->mi_oref != 0); if (--mip->mi_oref == 0) { if ((mip->mi_callbacks->mc_callbacks & MC_CLOSE)) mip->mi_close(mip->mi_driver); } } i_mac_perim_exit(mip); ddi_release_devi(mip->mi_dip); mac_rele(mip); } /* * Misc utility functions to retrieve various information about a MAC * instance or a MAC client. */ const mac_info_t * mac_info(mac_handle_t mh) { return (&((mac_impl_t *)mh)->mi_info); } dev_info_t * mac_devinfo_get(mac_handle_t mh) { return (((mac_impl_t *)mh)->mi_dip); } void * mac_driver(mac_handle_t mh) { return (((mac_impl_t *)mh)->mi_driver); } const char * mac_name(mac_handle_t mh) { return (((mac_impl_t *)mh)->mi_name); } int mac_type(mac_handle_t mh) { return (((mac_impl_t *)mh)->mi_type->mt_type); } char * mac_client_name(mac_client_handle_t mch) { return (((mac_client_impl_t *)mch)->mci_name); } minor_t mac_minor(mac_handle_t mh) { return (((mac_impl_t *)mh)->mi_minor); } /* * Return the VID associated with a MAC client. This function should * be called for clients which are associated with only one VID. */ uint16_t mac_client_vid(mac_client_handle_t mch) { uint16_t vid = VLAN_ID_NONE; mac_client_impl_t *mcip = (mac_client_impl_t *)mch; flow_desc_t flow_desc; if (mcip->mci_nflents == 0) return (vid); ASSERT(MCIP_DATAPATH_SETUP(mcip) && mac_client_single_rcvr(mcip)); mac_flow_get_desc(mcip->mci_flent, &flow_desc); if ((flow_desc.fd_mask & FLOW_LINK_VID) != 0) vid = flow_desc.fd_vid; return (vid); } /* * Return whether the specified MAC client corresponds to a VLAN VNIC. */ boolean_t mac_client_is_vlan_vnic(mac_client_handle_t mch) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; return (((mcip->mci_state_flags & MCIS_IS_VNIC) != 0) && ((mcip->mci_flent->fe_type & FLOW_PRIMARY_MAC) != 0)); } /* * Return the link speed associated with the specified MAC client. * * The link speed of a MAC client is equal to the smallest value of * 1) the current link speed of the underlying NIC, or * 2) the bandwidth limit set for the MAC client. * * Note that the bandwidth limit can be higher than the speed * of the underlying NIC. This is allowed to avoid spurious * administration action failures or artifically lowering the * bandwidth limit of a link that may have temporarily lowered * its link speed due to hardware problem or administrator action. */ static uint64_t mac_client_ifspeed(mac_client_impl_t *mcip) { mac_impl_t *mip = mcip->mci_mip; uint64_t nic_speed; nic_speed = mac_stat_get((mac_handle_t)mip, MAC_STAT_IFSPEED); if (nic_speed == 0) { return (0); } else { uint64_t policy_limit = (uint64_t)-1; if (MCIP_RESOURCE_PROPS_MASK(mcip) & MRP_MAXBW) policy_limit = MCIP_RESOURCE_PROPS_MAXBW(mcip); return (MIN(policy_limit, nic_speed)); } } /* * Return the link state of the specified client. If here are more * than one clients of the underying mac_impl_t, the link state * will always be UP regardless of the link state of the underlying * mac_impl_t. This is needed to allow the MAC clients to continue * to communicate with each other even when the physical link of * their mac_impl_t is down. */ static uint64_t mac_client_link_state(mac_client_impl_t *mcip) { mac_impl_t *mip = mcip->mci_mip; uint16_t vid; mac_client_impl_t *mci_list; mac_unicast_impl_t *mui_list, *oth_mui_list; /* * Returns LINK_STATE_UP if there are other MAC clients defined on * mac_impl_t which share same VLAN ID as that of mcip. Note that * if 'mcip' has more than one VID's then we match ANY one of the * VID's with other MAC client's VID's and return LINK_STATE_UP. */ rw_enter(&mcip->mci_rw_lock, RW_READER); for (mui_list = mcip->mci_unicast_list; mui_list != NULL; mui_list = mui_list->mui_next) { vid = mui_list->mui_vid; for (mci_list = mip->mi_clients_list; mci_list != NULL; mci_list = mci_list->mci_client_next) { if (mci_list == mcip) continue; for (oth_mui_list = mci_list->mci_unicast_list; oth_mui_list != NULL; oth_mui_list = oth_mui_list-> mui_next) { if (vid == oth_mui_list->mui_vid) { rw_exit(&mcip->mci_rw_lock); return (LINK_STATE_UP); } } } } rw_exit(&mcip->mci_rw_lock); return (mac_stat_get((mac_handle_t)mip, MAC_STAT_LINK_STATE)); } /* * Return the statistics of a MAC client. These statistics are different * then the statistics of the underlying MAC which are returned by * mac_stat_get(). */ uint64_t mac_client_stat_get(mac_client_handle_t mch, uint_t stat) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; mac_impl_t *mip = mcip->mci_mip; uint64_t val; switch (stat) { case MAC_STAT_LINK_STATE: val = mac_client_link_state(mcip); break; case MAC_STAT_LINK_UP: val = (mac_client_link_state(mcip) == LINK_STATE_UP); break; case MAC_STAT_PROMISC: val = mac_stat_get((mac_handle_t)mip, MAC_STAT_PROMISC); break; case MAC_STAT_LOWLINK_STATE: val = mac_stat_get((mac_handle_t)mip, MAC_STAT_LOWLINK_STATE); break; case MAC_STAT_IFSPEED: val = mac_client_ifspeed(mcip); break; case MAC_STAT_MULTIRCV: val = mcip->mci_stat_multircv; break; case MAC_STAT_BRDCSTRCV: val = mcip->mci_stat_brdcstrcv; break; case MAC_STAT_MULTIXMT: val = mcip->mci_stat_multixmt; break; case MAC_STAT_BRDCSTXMT: val = mcip->mci_stat_brdcstxmt; break; case MAC_STAT_OBYTES: val = mcip->mci_stat_obytes; break; case MAC_STAT_OPACKETS: val = mcip->mci_stat_opackets; break; case MAC_STAT_OERRORS: val = mcip->mci_stat_oerrors; break; case MAC_STAT_IPACKETS: val = mcip->mci_stat_ipackets; break; case MAC_STAT_RBYTES: val = mcip->mci_stat_ibytes; break; case MAC_STAT_IERRORS: val = mcip->mci_stat_ierrors; break; default: val = mac_stat_default(mip, stat); break; } return (val); } /* * Return the statistics of the specified MAC instance. */ uint64_t mac_stat_get(mac_handle_t mh, uint_t stat) { mac_impl_t *mip = (mac_impl_t *)mh; uint64_t val; int ret; /* * The range of stat determines where it is maintained. Stat * values from 0 up to (but not including) MAC_STAT_MIN are * mainteined by the mac module itself. Everything else is * maintained by the driver. * * If the mac_impl_t being queried corresponds to a VNIC, * the stats need to be queried from the lower MAC client * corresponding to the VNIC. (The mac_link_update() * invoked by the driver to the lower MAC causes the *lower * MAC* to update its mi_linkstate, and send a notification * to its MAC clients. Due to the VNIC passthrough, * these notifications are sent to the upper MAC clients * of the VNIC directly, and the upper mac_impl_t of the VNIC * does not have a valid mi_linkstate. */ if (stat < MAC_STAT_MIN && !(mip->mi_state_flags & MIS_IS_VNIC)) { /* these stats are maintained by the mac module itself */ switch (stat) { case MAC_STAT_LINK_STATE: return (mip->mi_linkstate); case MAC_STAT_LINK_UP: return (mip->mi_linkstate == LINK_STATE_UP); case MAC_STAT_PROMISC: return (mip->mi_devpromisc != 0); case MAC_STAT_LOWLINK_STATE: return (mip->mi_lowlinkstate); default: ASSERT(B_FALSE); } } /* * Call the driver to get the given statistic. */ ret = mip->mi_getstat(mip->mi_driver, stat, &val); if (ret != 0) { /* * The driver doesn't support this statistic. Get the * statistic's default value. */ val = mac_stat_default(mip, stat); } return (val); } /* * Utility function which returns the VID associated with a flow entry. */ uint16_t i_mac_flow_vid(flow_entry_t *flent) { flow_desc_t flow_desc; mac_flow_get_desc(flent, &flow_desc); if ((flow_desc.fd_mask & FLOW_LINK_VID) != 0) return (flow_desc.fd_vid); return (VLAN_ID_NONE); } /* * Verify the validity of the specified unicast MAC address. Returns B_TRUE * if the address is valid, B_FALSE otherwise (multicast address, or incorrect * length. */ boolean_t mac_unicst_verify(mac_handle_t mh, const uint8_t *addr, uint_t len) { mac_impl_t *mip = (mac_impl_t *)mh; /* * Verify the address. No lock is needed since mi_type and plugin * details don't change after mac_register(). */ if ((len != mip->mi_type->mt_addr_length) || (mip->mi_type->mt_ops.mtops_unicst_verify(addr, mip->mi_pdata)) != 0) { return (B_FALSE); } else { return (B_TRUE); } } void mac_sdu_get(mac_handle_t mh, uint_t *min_sdu, uint_t *max_sdu) { mac_impl_t *mip = (mac_impl_t *)mh; if (min_sdu != NULL) *min_sdu = mip->mi_sdu_min; if (max_sdu != NULL) *max_sdu = mip->mi_sdu_max; } /* * Update the MAC unicast address of the specified client's flows. Currently * only one unicast MAC unicast address is allowed per client. */ static void mac_unicast_update_client_flow(mac_client_impl_t *mcip) { mac_impl_t *mip = mcip->mci_mip; flow_entry_t *flent = mcip->mci_flent; mac_address_t *map = mcip->mci_unicast; flow_desc_t flow_desc; ASSERT(MAC_PERIM_HELD((mac_handle_t)mip)); ASSERT(flent != NULL); mac_flow_get_desc(flent, &flow_desc); ASSERT(flow_desc.fd_mask & FLOW_LINK_DST); bcopy(map->ma_addr, flow_desc.fd_dst_mac, map->ma_len); mac_flow_set_desc(flent, &flow_desc); /* * A MAC client could have one MAC address but multiple * VLANs. In that case update the flow entries corresponding * to all VLANs of the MAC client. */ for (flent = mcip->mci_flent_list; flent != NULL; flent = flent->fe_client_next) { mac_flow_get_desc(flent, &flow_desc); if (!(flent->fe_type & FLOW_PRIMARY_MAC || flent->fe_type & FLOW_VNIC_MAC)) continue; bcopy(map->ma_addr, flow_desc.fd_dst_mac, map->ma_len); mac_flow_set_desc(flent, &flow_desc); } } /* * Update all clients that share the same unicast address. */ void mac_unicast_update_clients(mac_impl_t *mip, mac_address_t *map) { mac_client_impl_t *mcip; ASSERT(MAC_PERIM_HELD((mac_handle_t)mip)); /* * Find all clients that share the same unicast MAC address and update * them appropriately. */ for (mcip = mip->mi_clients_list; mcip != NULL; mcip = mcip->mci_client_next) { /* * Ignore clients that don't share this MAC address. */ if (map != mcip->mci_unicast) continue; /* * Update those clients with same old unicast MAC address. */ mac_unicast_update_client_flow(mcip); } } /* * Update the unicast MAC address of the specified VNIC MAC client. * * Check whether the operation is valid. Any of following cases should fail: * * 1. It's a VLAN type of VNIC. * 2. The new value is current "primary" MAC address. * 3. The current MAC address is shared with other clients. * 4. The new MAC address has been used. This case will be valid when * client migration is fully supported. */ int mac_vnic_unicast_set(mac_client_handle_t mch, const uint8_t *addr) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; mac_impl_t *mip = mcip->mci_mip; mac_address_t *map = mcip->mci_unicast; int err; ASSERT(!(mip->mi_state_flags & MIS_IS_VNIC)); ASSERT(mcip->mci_state_flags & MCIS_IS_VNIC); ASSERT(mcip->mci_flags != MAC_CLIENT_FLAGS_PRIMARY); i_mac_perim_enter(mip); /* * If this is a VLAN type of VNIC, it's using "primary" MAC address * of the underlying interface. Must fail here. Refer to case 1 above. */ if (bcmp(map->ma_addr, mip->mi_addr, map->ma_len) == 0) { i_mac_perim_exit(mip); return (ENOTSUP); } /* * If the new address is the "primary" one, must fail. Refer to * case 2 above. */ if (bcmp(addr, mip->mi_addr, map->ma_len) == 0) { i_mac_perim_exit(mip); return (EACCES); } /* * If the address is shared by multiple clients, must fail. Refer * to case 3 above. */ if (mac_check_macaddr_shared(map)) { i_mac_perim_exit(mip); return (EBUSY); } /* * If the new address has been used, must fail for now. Refer to * case 4 above. */ if (mac_find_macaddr(mip, (uint8_t *)addr) != NULL) { i_mac_perim_exit(mip); return (ENOTSUP); } /* * Update the MAC address. */ err = mac_update_macaddr(map, (uint8_t *)addr); if (err != 0) { i_mac_perim_exit(mip); return (err); } /* * Update all flows of this MAC client. */ mac_unicast_update_client_flow(mcip); i_mac_perim_exit(mip); return (0); } /* * Program the new primary unicast address of the specified MAC. * * Function mac_update_macaddr() takes care different types of underlying * MAC. If the underlying MAC is VNIC, the VNIC driver must have registerd * mi_unicst() entry point, that indirectly calls mac_vnic_unicast_set() * which will take care of updating the MAC address of the corresponding * MAC client. * * This is the only interface that allow the client to update the "primary" * MAC address of the underlying MAC. The new value must have not been * used by other clients. */ int mac_unicast_primary_set(mac_handle_t mh, const uint8_t *addr) { mac_impl_t *mip = (mac_impl_t *)mh; mac_address_t *map; int err; /* verify the address validity */ if (!mac_unicst_verify(mh, addr, mip->mi_type->mt_addr_length)) return (EINVAL); i_mac_perim_enter(mip); /* * If the new value is the same as the current primary address value, * there's nothing to do. */ if (bcmp(addr, mip->mi_addr, mip->mi_type->mt_addr_length) == 0) { i_mac_perim_exit(mip); return (0); } if (mac_find_macaddr(mip, (uint8_t *)addr) != 0) { i_mac_perim_exit(mip); return (EBUSY); } map = mac_find_macaddr(mip, mip->mi_addr); ASSERT(map != NULL); /* * Update the MAC address. */ if (mip->mi_state_flags & MIS_IS_AGGR) { mac_capab_aggr_t aggr_cap; /* * If the mac is an aggregation, other than the unicast * addresses programming, aggr must be informed about this * primary unicst address change to change its mac address * policy to be user-specified. */ ASSERT(map->ma_type == MAC_ADDRESS_TYPE_UNICAST_CLASSIFIED); VERIFY(i_mac_capab_get(mh, MAC_CAPAB_AGGR, &aggr_cap)); err = aggr_cap.mca_unicst(mip->mi_driver, addr); if (err == 0) bcopy(addr, map->ma_addr, map->ma_len); } else { err = mac_update_macaddr(map, (uint8_t *)addr); } if (err != 0) { i_mac_perim_exit(mip); return (err); } mac_unicast_update_clients(mip, map); /* * Save the new primary MAC address in mac_impl_t. */ bcopy(addr, mip->mi_addr, mip->mi_type->mt_addr_length); i_mac_perim_exit(mip); if (err == 0) i_mac_notify(mip, MAC_NOTE_UNICST); return (err); } /* * Return the current primary MAC address of the specified MAC. */ void mac_unicast_primary_get(mac_handle_t mh, uint8_t *addr) { mac_impl_t *mip = (mac_impl_t *)mh; rw_enter(&mip->mi_rw_lock, RW_READER); bcopy(mip->mi_addr, addr, mip->mi_type->mt_addr_length); rw_exit(&mip->mi_rw_lock); } /* * Return information about the use of the primary MAC address of the * specified MAC instance: * * - if client_name is non-NULL, it must point to a string of at * least MAXNAMELEN bytes, and will be set to the name of the MAC * client which uses the primary MAC address. * * - if in_use is non-NULL, used to return whether the primary MAC * address is currently in use. */ void mac_unicast_primary_info(mac_handle_t mh, char *client_name, boolean_t *in_use) { mac_impl_t *mip = (mac_impl_t *)mh; mac_client_impl_t *cur_client; if (in_use != NULL) *in_use = B_FALSE; if (client_name != NULL) bzero(client_name, MAXNAMELEN); /* * The mi_rw_lock is used to protect threads that don't hold the * mac perimeter to get a consistent view of the mi_clients_list. * Threads that modify the list must hold both the mac perimeter and * mi_rw_lock(RW_WRITER) */ rw_enter(&mip->mi_rw_lock, RW_READER); for (cur_client = mip->mi_clients_list; cur_client != NULL; cur_client = cur_client->mci_client_next) { if (mac_is_primary_client(cur_client) || (mip->mi_state_flags & MIS_IS_VNIC)) { rw_exit(&mip->mi_rw_lock); if (in_use != NULL) *in_use = B_TRUE; if (client_name != NULL) { bcopy(cur_client->mci_name, client_name, MAXNAMELEN); } return; } } rw_exit(&mip->mi_rw_lock); } /* * Return the current destination MAC address of the specified MAC. */ boolean_t mac_dst_get(mac_handle_t mh, uint8_t *addr) { mac_impl_t *mip = (mac_impl_t *)mh; rw_enter(&mip->mi_rw_lock, RW_READER); if (mip->mi_dstaddr_set) bcopy(mip->mi_dstaddr, addr, mip->mi_type->mt_addr_length); rw_exit(&mip->mi_rw_lock); return (mip->mi_dstaddr_set); } /* * Add the specified MAC client to the list of clients which opened * the specified MAC. */ static void mac_client_add(mac_client_impl_t *mcip) { mac_impl_t *mip = mcip->mci_mip; ASSERT(MAC_PERIM_HELD((mac_handle_t)mip)); /* add VNIC to the front of the list */ rw_enter(&mip->mi_rw_lock, RW_WRITER); mcip->mci_client_next = mip->mi_clients_list; mip->mi_clients_list = mcip; mip->mi_nclients++; rw_exit(&mip->mi_rw_lock); } /* * Remove the specified MAC client from the list of clients which opened * the specified MAC. */ static void mac_client_remove(mac_client_impl_t *mcip) { mac_impl_t *mip = mcip->mci_mip; mac_client_impl_t **prev, *cclient; ASSERT(MAC_PERIM_HELD((mac_handle_t)mip)); rw_enter(&mip->mi_rw_lock, RW_WRITER); prev = &mip->mi_clients_list; cclient = *prev; while (cclient != NULL && cclient != mcip) { prev = &cclient->mci_client_next; cclient = *prev; } ASSERT(cclient != NULL); *prev = cclient->mci_client_next; mip->mi_nclients--; rw_exit(&mip->mi_rw_lock); } static mac_unicast_impl_t * mac_client_find_vid(mac_client_impl_t *mcip, uint16_t vid) { mac_unicast_impl_t *muip = mcip->mci_unicast_list; while ((muip != NULL) && (muip->mui_vid != vid)) muip = muip->mui_next; return (muip); } /* * Return whether the specified (MAC address, VID) tuple is already used by * one of the MAC clients associated with the specified MAC. */ static boolean_t mac_addr_in_use(mac_impl_t *mip, uint8_t *mac_addr, uint16_t vid) { mac_client_impl_t *client; mac_address_t *map; ASSERT(MAC_PERIM_HELD((mac_handle_t)mip)); for (client = mip->mi_clients_list; client != NULL; client = client->mci_client_next) { /* * Ignore clients that don't have unicast address. */ if (client->mci_unicast_list == NULL) continue; map = client->mci_unicast; if ((bcmp(mac_addr, map->ma_addr, map->ma_len) == 0) && (mac_client_find_vid(client, vid) != NULL)) { return (B_TRUE); } } return (B_FALSE); } /* * Generate a random MAC address. The MAC address prefix is * stored in the array pointed to by mac_addr, and its length, in bytes, * is specified by prefix_len. The least significant bits * after prefix_len bytes are generated, and stored after the prefix * in the mac_addr array. */ int mac_addr_random(mac_client_handle_t mch, uint_t prefix_len, uint8_t *mac_addr, mac_diag_t *diag) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; mac_impl_t *mip = mcip->mci_mip; size_t addr_len = mip->mi_type->mt_addr_length; if (prefix_len >= addr_len) { *diag = MAC_DIAG_MACPREFIXLEN_INVALID; return (EINVAL); } /* check the prefix value */ if (prefix_len > 0) { bzero(mac_addr + prefix_len, addr_len - prefix_len); if (!mac_unicst_verify((mac_handle_t)mip, mac_addr, addr_len)) { *diag = MAC_DIAG_MACPREFIX_INVALID; return (EINVAL); } } /* generate the MAC address */ if (prefix_len < addr_len) { (void) random_get_pseudo_bytes(mac_addr + prefix_len, addr_len - prefix_len); } *diag = 0; return (0); } /* * Set the priority range for this MAC client. This will be used to * determine the absolute priority for the threads created for this * MAC client using the specified "low", "medium" and "high" level. * This will also be used for any subflows on this MAC client. */ #define MAC_CLIENT_SET_PRIORITY_RANGE(mcip, pri) { \ (mcip)->mci_min_pri = FLOW_MIN_PRIORITY(MINCLSYSPRI, \ MAXCLSYSPRI, (pri)); \ (mcip)->mci_max_pri = FLOW_MAX_PRIORITY(MINCLSYSPRI, \ MAXCLSYSPRI, (mcip)->mci_min_pri); \ } /* * MAC client open entry point. Return a new MAC client handle. Each * MAC client is associated with a name, specified through the 'name' * argument. */ int mac_client_open(mac_handle_t mh, mac_client_handle_t *mchp, char *name, uint16_t flags) { mac_impl_t *mip = (mac_impl_t *)mh; mac_client_impl_t *mcip; int err = 0; boolean_t share_desired = ((flags & MAC_OPEN_FLAGS_SHARES_DESIRED) != 0); boolean_t no_hwrings = ((flags & MAC_OPEN_FLAGS_NO_HWRINGS) != 0); boolean_t req_hwrings = ((flags & MAC_OPEN_FLAGS_REQ_HWRINGS) != 0); flow_entry_t *flent = NULL; *mchp = NULL; if (share_desired && no_hwrings) { /* can't have shares but no hardware rings */ return (EINVAL); } i_mac_perim_enter(mip); if (mip->mi_state_flags & MIS_IS_VNIC) { /* * The underlying MAC is a VNIC. Return the MAC client * handle of the lower MAC which was obtained by * the VNIC driver when it did its mac_client_open(). */ mcip = mac_vnic_lower(mip); /* * Note that multiple mac clients share the same mcip in * this case. */ if (flags & MAC_OPEN_FLAGS_EXCLUSIVE) mcip->mci_state_flags |= MCIS_EXCLUSIVE; if (flags & MAC_OPEN_FLAGS_MULTI_PRIMARY) mcip->mci_flags |= MAC_CLIENT_FLAGS_MULTI_PRIMARY; mip->mi_clients_list = mcip; i_mac_perim_exit(mip); *mchp = (mac_client_handle_t)mcip; return (err); } mcip = kmem_cache_alloc(mac_client_impl_cache, KM_SLEEP); mcip->mci_mip = mip; mcip->mci_upper_mip = NULL; mcip->mci_rx_fn = mac_pkt_drop; mcip->mci_rx_arg = NULL; mcip->mci_rx_p_fn = NULL; mcip->mci_rx_p_arg = NULL; mcip->mci_p_unicast_list = NULL; mcip->mci_direct_rx_fn = NULL; mcip->mci_direct_rx_arg = NULL; mcip->mci_unicast_list = NULL; if ((flags & MAC_OPEN_FLAGS_IS_VNIC) != 0) mcip->mci_state_flags |= MCIS_IS_VNIC; if ((flags & MAC_OPEN_FLAGS_EXCLUSIVE) != 0) mcip->mci_state_flags |= MCIS_EXCLUSIVE; if ((flags & MAC_OPEN_FLAGS_IS_AGGR_PORT) != 0) mcip->mci_state_flags |= MCIS_IS_AGGR_PORT; if ((flags & MAC_OPEN_FLAGS_USE_DATALINK_NAME) != 0) { datalink_id_t linkid; ASSERT(name == NULL); if ((err = dls_devnet_macname2linkid(mip->mi_name, &linkid)) != 0) { goto done; } if ((err = dls_mgmt_get_linkinfo(linkid, mcip->mci_name, NULL, NULL, NULL)) != 0) { /* * Use mac name if dlmgmtd is not available. */ if (err == EBADF) { (void) strlcpy(mcip->mci_name, mip->mi_name, sizeof (mcip->mci_name)); err = 0; } else { goto done; } } mcip->mci_state_flags |= MCIS_USE_DATALINK_NAME; } else { ASSERT(name != NULL); if (strlen(name) > MAXNAMELEN) { err = EINVAL; goto done; } (void) strlcpy(mcip->mci_name, name, sizeof (mcip->mci_name)); } if (flags & MAC_OPEN_FLAGS_MULTI_PRIMARY) mcip->mci_flags |= MAC_CLIENT_FLAGS_MULTI_PRIMARY; /* the subflow table will be created dynamically */ mcip->mci_subflow_tab = NULL; mcip->mci_stat_multircv = 0; mcip->mci_stat_brdcstrcv = 0; mcip->mci_stat_multixmt = 0; mcip->mci_stat_brdcstxmt = 0; mcip->mci_stat_obytes = 0; mcip->mci_stat_opackets = 0; mcip->mci_stat_oerrors = 0; mcip->mci_stat_ibytes = 0; mcip->mci_stat_ipackets = 0; mcip->mci_stat_ierrors = 0; /* Create an initial flow */ err = mac_flow_create(NULL, NULL, mcip->mci_name, NULL, mcip->mci_state_flags & MCIS_IS_VNIC ? FLOW_VNIC_MAC : FLOW_PRIMARY_MAC, &flent); if (err != 0) goto done; mcip->mci_flent = flent; FLOW_MARK(flent, FE_MC_NO_DATAPATH); flent->fe_mcip = mcip; /* * Place initial creation reference on the flow. This reference * is released in the corresponding delete action viz. * mac_unicast_remove after waiting for all transient refs to * to go away. The wait happens in mac_flow_wait. */ FLOW_REFHOLD(flent); /* * Do this ahead of the mac_bcast_add() below so that the mi_nclients * will have the right value for mac_rx_srs_setup(). */ mac_client_add(mcip); if (no_hwrings) mcip->mci_state_flags |= MCIS_NO_HWRINGS; if (req_hwrings) mcip->mci_state_flags |= MCIS_REQ_HWRINGS; mcip->mci_share = NULL; if (share_desired) { ASSERT(!no_hwrings); i_mac_share_alloc(mcip); } DTRACE_PROBE2(mac__client__open__allocated, mac_impl_t *, mcip->mci_mip, mac_client_impl_t *, mcip); *mchp = (mac_client_handle_t)mcip; i_mac_perim_exit(mip); return (0); done: i_mac_perim_exit(mip); mcip->mci_state_flags = 0; mcip->mci_tx_flag = 0; kmem_cache_free(mac_client_impl_cache, mcip); return (err); } /* * Close the specified MAC client handle. */ void mac_client_close(mac_client_handle_t mch, uint16_t flags) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; mac_impl_t *mip = mcip->mci_mip; flow_entry_t *flent; i_mac_perim_enter(mip); if (flags & MAC_CLOSE_FLAGS_EXCLUSIVE) mcip->mci_state_flags &= ~MCIS_EXCLUSIVE; if ((mcip->mci_state_flags & MCIS_IS_VNIC) && !(flags & MAC_CLOSE_FLAGS_IS_VNIC)) { /* * This is an upper VNIC client initiated operation. * The lower MAC client will be closed by the VNIC driver * when the VNIC is deleted. */ i_mac_perim_exit(mip); return; } /* * Remove the flent associated with the MAC client */ flent = mcip->mci_flent; mcip->mci_flent = NULL; FLOW_FINAL_REFRELE(flent); /* * MAC clients must remove the unicast addresses and promisc callbacks * they added before issuing a mac_client_close(). */ ASSERT(mcip->mci_unicast_list == NULL); ASSERT(mcip->mci_promisc_list == NULL); ASSERT(mcip->mci_tx_notify_cb_list == NULL); i_mac_share_free(mcip); mac_client_remove(mcip); i_mac_perim_exit(mip); mcip->mci_subflow_tab = NULL; mcip->mci_state_flags = 0; mcip->mci_tx_flag = 0; kmem_cache_free(mac_client_impl_cache, mch); } /* * Enable bypass for the specified MAC client. */ boolean_t mac_rx_bypass_set(mac_client_handle_t mch, mac_direct_rx_t rx_fn, void *arg1) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; mac_impl_t *mip = mcip->mci_mip; ASSERT(MAC_PERIM_HELD((mac_handle_t)mip)); /* * If the mac_client is a VLAN, we should not do DLS bypass and * instead let the packets come up via mac_rx_deliver so the vlan * header can be stripped. */ if (mcip->mci_nvids > 0) return (B_FALSE); /* * These are not accessed directly in the data path, and hence * don't need any protection */ mcip->mci_direct_rx_fn = rx_fn; mcip->mci_direct_rx_arg = arg1; mcip->mci_state_flags |= MCIS_CLIENT_POLL_CAPABLE; return (B_TRUE); } /* * Set the receive callback for the specified MAC client. There can be * at most one such callback per MAC client. */ void mac_rx_set(mac_client_handle_t mch, mac_rx_t rx_fn, void *arg) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; mac_impl_t *mip = mcip->mci_mip; /* * Instead of adding an extra set of locks and refcnts in * the datapath at the mac client boundary, we temporarily quiesce * the SRS and related entities. We then change the receive function * without interference from any receive data thread and then reenable * the data flow subsequently. */ i_mac_perim_enter(mip); mac_rx_client_quiesce(mch); mcip->mci_rx_fn = rx_fn; mcip->mci_rx_arg = arg; mac_rx_client_restart(mch); i_mac_perim_exit(mip); } /* * Reset the receive callback for the specified MAC client. */ void mac_rx_clear(mac_client_handle_t mch) { mac_rx_set(mch, mac_pkt_drop, NULL); } /* * Walk the MAC client subflow table and updates their priority values. */ static int mac_update_subflow_priority_cb(flow_entry_t *flent, void *arg) { mac_flow_update_priority(arg, flent); return (0); } void mac_update_subflow_priority(mac_client_impl_t *mcip) { (void) mac_flow_walk(mcip->mci_subflow_tab, mac_update_subflow_priority_cb, mcip); } /* * When the MAC client is being brought up (i.e. we do a unicast_add) we need * to initialize the cpu and resource control structure in the * mac_client_impl_t from the mac_impl_t (i.e if there are any cached * properties before the flow entry for the unicast address was created). */ int mac_resource_ctl_set(mac_client_handle_t mch, mac_resource_props_t *mrp) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; mac_impl_t *mip = (mac_impl_t *)mcip->mci_mip; int err = 0; ASSERT(MAC_PERIM_HELD((mac_handle_t)mip)); err = mac_validate_props(mrp); if (err != 0) return (err); mac_update_resources(mrp, MCIP_RESOURCE_PROPS(mcip), B_FALSE); if (MCIP_DATAPATH_SETUP(mcip)) { /* * We have to set this prior to calling mac_flow_modify. */ if (mrp->mrp_mask & MRP_PRIORITY) { if (mrp->mrp_priority == MPL_RESET) { MAC_CLIENT_SET_PRIORITY_RANGE(mcip, MPL_LINK_DEFAULT); } else { MAC_CLIENT_SET_PRIORITY_RANGE(mcip, mrp->mrp_priority); } } mac_flow_modify(mip->mi_flow_tab, mcip->mci_flent, mrp); if (mrp->mrp_mask & MRP_PRIORITY) mac_update_subflow_priority(mcip); return (0); } return (0); } void mac_resource_ctl_get(mac_client_handle_t mch, mac_resource_props_t *mrp) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; mac_resource_props_t *mcip_mrp = MCIP_RESOURCE_PROPS(mcip); bcopy(mcip_mrp, mrp, sizeof (mac_resource_props_t)); } static int mac_unicast_flow_create(mac_client_impl_t *mcip, uint8_t *mac_addr, uint16_t vid, boolean_t is_primary, boolean_t first_flow, flow_entry_t **flent, mac_resource_props_t *mrp) { mac_impl_t *mip = (mac_impl_t *)mcip->mci_mip; flow_desc_t flow_desc; char flowname[MAXFLOWNAMELEN]; int err; uint_t flent_flags; /* * First unicast address being added, create a new flow * for that MAC client. */ bzero(&flow_desc, sizeof (flow_desc)); flow_desc.fd_mac_len = mip->mi_type->mt_addr_length; bcopy(mac_addr, flow_desc.fd_dst_mac, flow_desc.fd_mac_len); flow_desc.fd_mask = FLOW_LINK_DST; if (vid != 0) { flow_desc.fd_vid = vid; flow_desc.fd_mask |= FLOW_LINK_VID; } /* * XXX-nicolas. For now I'm keeping the FLOW_PRIMARY_MAC * and FLOW_VNIC. Even though they're a hack inherited * from the SRS code, we'll keep them for now. They're currently * consumed by mac_datapath_setup() to create the SRS. * That code should be eventually moved out of * mac_datapath_setup() and moved to a mac_srs_create() * function of some sort to keep things clean. * * Also, there's no reason why the SRS for the primary MAC * client should be different than any other MAC client. Until * this is cleaned-up, we support only one MAC unicast address * per client. * * We set FLOW_PRIMARY_MAC for the primary MAC address, * FLOW_VNIC for everything else. */ if (is_primary) flent_flags = FLOW_PRIMARY_MAC; else flent_flags = FLOW_VNIC_MAC; /* * For the first flow we use the mac client's name - mci_name, for * subsequent ones we just create a name with the vid. This is * so that we can add these flows to the same flow table. This is * fine as the flow name (except for the one with the mac client's * name) is not visible. When the first flow is removed, we just replace * its fdesc with another from the list, so we will still retain the * flent with the MAC client's flow name. */ if (first_flow) { bcopy(mcip->mci_name, flowname, MAXFLOWNAMELEN); } else { (void) sprintf(flowname, "%s%u", mcip->mci_name, vid); flent_flags = FLOW_NO_STATS; } if ((err = mac_flow_create(&flow_desc, mrp, flowname, NULL, flent_flags, flent)) != 0) return (err); FLOW_MARK(*flent, FE_INCIPIENT); (*flent)->fe_mcip = mcip; /* * Place initial creation reference on the flow. This reference * is released in the corresponding delete action viz. * mac_unicast_remove after waiting for all transient refs to * to go away. The wait happens in mac_flow_wait. * We have already held the reference in mac_client_open(). */ if (!first_flow) FLOW_REFHOLD(*flent); return (0); } /* Refresh the multicast grouping for this VID. */ int mac_client_update_mcast(void *arg, boolean_t add, const uint8_t *addrp) { flow_entry_t *flent = arg; mac_client_impl_t *mcip = flent->fe_mcip; uint16_t vid; flow_desc_t flow_desc; mac_flow_get_desc(flent, &flow_desc); vid = (flow_desc.fd_mask & FLOW_LINK_VID) != 0 ? flow_desc.fd_vid : VLAN_ID_NONE; /* * We don't call mac_multicast_add()/mac_multicast_remove() as * we want to add/remove for this specific vid. */ if (add) { return (mac_bcast_add(mcip, addrp, vid, MAC_ADDRTYPE_MULTICAST)); } else { mac_bcast_delete(mcip, addrp, vid); return (0); } } static void mac_update_single_active_client(mac_impl_t *mip) { mac_client_impl_t *client = NULL; ASSERT(MAC_PERIM_HELD((mac_handle_t)mip)); rw_enter(&mip->mi_rw_lock, RW_WRITER); if (mip->mi_nactiveclients == 1) { /* * Find the one active MAC client from the list of MAC * clients. The active MAC client has at least one * unicast address. */ for (client = mip->mi_clients_list; client != NULL; client = client->mci_client_next) { if (client->mci_unicast_list != NULL) break; } ASSERT(client != NULL); } /* * mi_single_active_client is protected by the MAC impl's read/writer * lock, which allows mac_rx() to check the value of that pointer * as a reader. */ mip->mi_single_active_client = client; rw_exit(&mip->mi_rw_lock); } /* * Set up the data path. Called from i_mac_unicast_add after having * done all the validations including making sure this is an active * client (i.e that is ready to process packets.) */ static int mac_client_datapath_setup(mac_client_impl_t *mcip, uint16_t vid, uint8_t *mac_addr, mac_resource_props_t *mrp, boolean_t isprimary, mac_unicast_impl_t *muip) { mac_impl_t *mip = mcip->mci_mip; boolean_t mac_started = B_FALSE; boolean_t bcast_added = B_FALSE; boolean_t nactiveclients_added = B_FALSE; flow_entry_t *flent; int err = 0; if ((err = mac_start((mac_handle_t)mip)) != 0) goto bail; mac_started = B_TRUE; /* add the MAC client to the broadcast address group by default */ if (mip->mi_type->mt_brdcst_addr != NULL) { err = mac_bcast_add(mcip, mip->mi_type->mt_brdcst_addr, vid, MAC_ADDRTYPE_BROADCAST); if (err != 0) goto bail; bcast_added = B_TRUE; } /* * If this is the first unicast address addition for this * client, reuse the pre-allocated larval flow entry associated with * the MAC client. */ flent = (mcip->mci_nflents == 0) ? mcip->mci_flent : NULL; /* We are configuring the unicast flow now */ if (!MCIP_DATAPATH_SETUP(mcip)) { MAC_CLIENT_SET_PRIORITY_RANGE(mcip, (mrp->mrp_mask & MRP_PRIORITY) ? mrp->mrp_priority : MPL_LINK_DEFAULT); if ((err = mac_unicast_flow_create(mcip, mac_addr, vid, isprimary, B_TRUE, &flent, mrp)) != 0) goto bail; mip->mi_nactiveclients++; nactiveclients_added = B_TRUE; /* * This will allocate the RX ring group if possible for the * flow and program the software classifier as needed. */ if ((err = mac_datapath_setup(mcip, flent, SRST_LINK)) != 0) goto bail; /* * The unicast MAC address must have been added successfully. */ ASSERT(mcip->mci_unicast != NULL); /* * Push down the sub-flows that were defined on this link * hitherto. The flows are added to the active flow table * and SRS, softrings etc. are created as needed. */ mac_link_init_flows((mac_client_handle_t)mcip); } else { mac_address_t *map = mcip->mci_unicast; /* * A unicast flow already exists for that MAC client, * this flow must be the same mac address but with * different VID. It has been checked by mac_addr_in_use(). * * We will use the SRS etc. from the mci_flent. Note that * We don't need to create kstat for this as except for * the fdesc, everything will be used from in the 1st flent. */ if (bcmp(mac_addr, map->ma_addr, map->ma_len) != 0) { err = EINVAL; goto bail; } if ((err = mac_unicast_flow_create(mcip, mac_addr, vid, isprimary, B_FALSE, &flent, NULL)) != 0) { goto bail; } if ((err = mac_flow_add(mip->mi_flow_tab, flent)) != 0) { FLOW_FINAL_REFRELE(flent); goto bail; } /* update the multicast group for this vid */ mac_client_bcast_refresh(mcip, mac_client_update_mcast, (void *)flent, B_TRUE); } /* populate the shared MAC address */ muip->mui_map = mcip->mci_unicast; rw_enter(&mcip->mci_rw_lock, RW_WRITER); muip->mui_next = mcip->mci_unicast_list; mcip->mci_unicast_list = muip; rw_exit(&mcip->mci_rw_lock); /* * First add the flent to the flow list of this mcip. Then set * the mip's mi_single_active_client if needed. The Rx path assumes * that mip->mi_single_active_client will always have an associated * flent. */ mac_client_add_to_flow_list(mcip, flent); if (nactiveclients_added) mac_update_single_active_client(mip); /* * Trigger a renegotiation of the capabilities when the number of * active clients changes from 1 to 2, since some of the capabilities * might have to be disabled. Also send a MAC_NOTE_LINK notification * to all the MAC clients whenever physical link is DOWN. */ if (mip->mi_nactiveclients == 2) { mac_capab_update((mac_handle_t)mip); mac_virtual_link_update(mip); } /* * Now that the setup is complete, clear the INCIPIENT flag. * The flag was set to avoid incoming packets seeing inconsistent * structures while the setup was in progress. Clear the mci_tx_flag * by calling mac_tx_client_block. It is possible that * mac_unicast_remove was called prior to this mac_unicast_add which * could have set the MCI_TX_QUIESCE flag. */ if (flent->fe_rx_ring_group != NULL) mac_rx_group_unmark(flent->fe_rx_ring_group, MR_INCIPIENT); FLOW_UNMARK(flent, FE_INCIPIENT); FLOW_UNMARK(flent, FE_MC_NO_DATAPATH); mac_tx_client_unblock(mcip); return (0); bail: if (bcast_added) mac_bcast_delete(mcip, mip->mi_type->mt_brdcst_addr, vid); if (nactiveclients_added) mip->mi_nactiveclients--; if (mac_started) mac_stop((mac_handle_t)mip); return (err); } /* * Return the passive primary MAC client, if present. The passive client is * a stand-by client that has the same unicast address as another that is * currenly active. Once the active client goes away, the passive client * becomes active. */ static mac_client_impl_t * mac_get_passive_primary_client(mac_impl_t *mip) { mac_client_impl_t *mcip; for (mcip = mip->mi_clients_list; mcip != NULL; mcip = mcip->mci_client_next) { if (mac_is_primary_client(mcip) && (mcip->mci_flags & MAC_CLIENT_FLAGS_PASSIVE_PRIMARY) != 0) { return (mcip); } } return (NULL); } /* * Add a new unicast address to the MAC client. * * The MAC address can be specified either by value, or the MAC client * can specify that it wants to use the primary MAC address of the * underlying MAC. See the introductory comments at the beginning * of this file for more more information on primary MAC addresses. * * Note also the tuple (MAC address, VID) must be unique * for the MAC clients defined on top of the same underlying MAC * instance, unless the MAC_UNICAST_NODUPCHECK is specified. * * In no case can a client use the PVID for the MAC, if the MAC has one set. */ int i_mac_unicast_add(mac_client_handle_t mch, uint8_t *mac_addr, uint16_t flags, mac_unicast_handle_t *mah, uint16_t vid, mac_diag_t *diag) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; mac_impl_t *mip = mcip->mci_mip; int err; uint_t mac_len = mip->mi_type->mt_addr_length; boolean_t check_dups = !(flags & MAC_UNICAST_NODUPCHECK); boolean_t fastpath_disabled = B_FALSE; boolean_t is_primary = (flags & MAC_UNICAST_PRIMARY); boolean_t is_unicast_hw = (flags & MAC_UNICAST_HW); mac_resource_props_t mrp; boolean_t passive_client = B_FALSE; mac_unicast_impl_t *muip; boolean_t is_vnic_primary = (flags & MAC_UNICAST_VNIC_PRIMARY); /* when VID is non-zero, the underlying MAC can not be VNIC */ ASSERT(!((mip->mi_state_flags & MIS_IS_VNIC) && (vid != 0))); /* * Check for an attempted use of the current Port VLAN ID, if enabled. * No client may use it. */ if (mip->mi_pvid != 0 && vid == mip->mi_pvid) return (EBUSY); /* * Check whether it's the primary client and flag it. */ if (!(mcip->mci_state_flags & MCIS_IS_VNIC) && is_primary && vid == 0) mcip->mci_flags |= MAC_CLIENT_FLAGS_PRIMARY; /* * is_vnic_primary is true when we come here as a VLAN VNIC * which uses the primary mac client's address but with a non-zero * VID. In this case the MAC address is not specified by an upper * MAC client. */ if ((mcip->mci_state_flags & MCIS_IS_VNIC) && is_primary && !is_vnic_primary) { /* * The address is being set by the upper MAC client * of a VNIC. The MAC address was already set by the * VNIC driver during VNIC creation. * * Note: a VNIC has only one MAC address. We return * the MAC unicast address handle of the lower MAC client * corresponding to the VNIC. We allocate a new entry * which is flagged appropriately, so that mac_unicast_remove() * doesn't attempt to free the original entry that * was allocated by the VNIC driver. */ ASSERT(mcip->mci_unicast != NULL); /* Check for VLAN flags, if present */ if ((flags & MAC_UNICAST_TAG_DISABLE) != 0) mcip->mci_state_flags |= MCIS_TAG_DISABLE; if ((flags & MAC_UNICAST_STRIP_DISABLE) != 0) mcip->mci_state_flags |= MCIS_STRIP_DISABLE; if ((flags & MAC_UNICAST_DISABLE_TX_VID_CHECK) != 0) mcip->mci_state_flags |= MCIS_DISABLE_TX_VID_CHECK; /* * Ensure that the primary unicast address of the VNIC * is added only once unless we have the * MAC_CLIENT_FLAGS_MULTI_PRIMARY set (and this is not * a passive MAC client). */ if ((mcip->mci_flags & MAC_CLIENT_FLAGS_VNIC_PRIMARY) != 0) { if ((mcip->mci_flags & MAC_CLIENT_FLAGS_MULTI_PRIMARY) == 0 || (mcip->mci_flags & MAC_CLIENT_FLAGS_PASSIVE_PRIMARY) != 0) { return (EBUSY); } mcip->mci_flags |= MAC_CLIENT_FLAGS_PASSIVE_PRIMARY; passive_client = B_TRUE; } mcip->mci_flags |= MAC_CLIENT_FLAGS_VNIC_PRIMARY; /* * Create a handle for vid 0. */ ASSERT(vid == 0); muip = kmem_zalloc(sizeof (mac_unicast_impl_t), KM_SLEEP); muip->mui_vid = vid; *mah = (mac_unicast_handle_t)muip; /* * This will be used by the caller to defer setting the * rx functions. */ if (passive_client) return (EAGAIN); return (0); } /* primary MAC clients cannot be opened on top of anchor VNICs */ if ((is_vnic_primary || is_primary) && i_mac_capab_get((mac_handle_t)mip, MAC_CAPAB_ANCHOR_VNIC, NULL)) { return (ENXIO); } /* * If this is a VNIC/VLAN, disable softmac fast-path. */ if (mcip->mci_state_flags & MCIS_IS_VNIC) { err = mac_fastpath_disable((mac_handle_t)mip); if (err != 0) return (err); fastpath_disabled = B_TRUE; } /* * Return EBUSY if: * - there is an exclusively active mac client exists. * - this is an exclusive active mac client but * a. there is already active mac clients exist, or * b. fastpath streams are already plumbed on this legacy device * - the mac creator has disallowed active mac clients. */ if (mip->mi_state_flags & (MIS_EXCLUSIVE|MIS_NO_ACTIVE)) { if (fastpath_disabled) mac_fastpath_enable((mac_handle_t)mip); return (EBUSY); } if (mcip->mci_state_flags & MCIS_EXCLUSIVE) { ASSERT(!fastpath_disabled); if (mip->mi_nactiveclients != 0) return (EBUSY); if ((mip->mi_state_flags & MIS_LEGACY) && !(mip->mi_capab_legacy.ml_active_set(mip->mi_driver))) { return (EBUSY); } mip->mi_state_flags |= MIS_EXCLUSIVE; } bzero(&mrp, sizeof (mac_resource_props_t)); if (is_primary && !(mcip->mci_state_flags & (MCIS_IS_VNIC | MCIS_IS_AGGR_PORT))) { /* * Apply the property cached in the mac_impl_t to the primary * mac client. If the mac client is a VNIC or an aggregation * port, its property should be set in the mcip when the * VNIC/aggr was created. */ mac_get_resources((mac_handle_t)mip, &mrp); (void) mac_client_set_resources(mch, &mrp); } else if (mcip->mci_state_flags & MCIS_IS_VNIC) { bcopy(MCIP_RESOURCE_PROPS(mcip), &mrp, sizeof (mac_resource_props_t)); } muip = kmem_zalloc(sizeof (mac_unicast_impl_t), KM_SLEEP); muip->mui_vid = vid; if (is_primary || is_vnic_primary) { mac_addr = mip->mi_addr; } else { /* * Verify the validity of the specified MAC addresses value. */ if (!mac_unicst_verify((mac_handle_t)mip, mac_addr, mac_len)) { *diag = MAC_DIAG_MACADDR_INVALID; err = EINVAL; goto bail_out; } /* * Make sure that the specified MAC address is different * than the unicast MAC address of the underlying NIC. */ if (check_dups && bcmp(mip->mi_addr, mac_addr, mac_len) == 0) { *diag = MAC_DIAG_MACADDR_NIC; err = EINVAL; goto bail_out; } } /* * Set the flags here so that if this is a passive client, we * can return and set it when we call mac_client_datapath_setup * when this becomes the active client. If we defer to using these * flags to mac_client_datapath_setup, then for a passive client, * we'd have to store the flags somewhere (probably fe_flags) * and then use it. */ if (!MCIP_DATAPATH_SETUP(mcip)) { if (is_unicast_hw) { /* * The client requires a hardware MAC address slot * for that unicast address. Since we support only * one unicast MAC address per client, flag the * MAC client itself. */ mcip->mci_state_flags |= MCIS_UNICAST_HW; } /* Check for VLAN flags, if present */ if ((flags & MAC_UNICAST_TAG_DISABLE) != 0) mcip->mci_state_flags |= MCIS_TAG_DISABLE; if ((flags & MAC_UNICAST_STRIP_DISABLE) != 0) mcip->mci_state_flags |= MCIS_STRIP_DISABLE; if ((flags & MAC_UNICAST_DISABLE_TX_VID_CHECK) != 0) mcip->mci_state_flags |= MCIS_DISABLE_TX_VID_CHECK; } else { /* * Assert that the specified flags are consistent with the * flags specified by previous calls to mac_unicast_add(). */ ASSERT(((flags & MAC_UNICAST_TAG_DISABLE) != 0 && (mcip->mci_state_flags & MCIS_TAG_DISABLE) != 0) || ((flags & MAC_UNICAST_TAG_DISABLE) == 0 && (mcip->mci_state_flags & MCIS_TAG_DISABLE) == 0)); ASSERT(((flags & MAC_UNICAST_STRIP_DISABLE) != 0 && (mcip->mci_state_flags & MCIS_STRIP_DISABLE) != 0) || ((flags & MAC_UNICAST_STRIP_DISABLE) == 0 && (mcip->mci_state_flags & MCIS_STRIP_DISABLE) == 0)); ASSERT(((flags & MAC_UNICAST_DISABLE_TX_VID_CHECK) != 0 && (mcip->mci_state_flags & MCIS_DISABLE_TX_VID_CHECK) != 0) || ((flags & MAC_UNICAST_DISABLE_TX_VID_CHECK) == 0 && (mcip->mci_state_flags & MCIS_DISABLE_TX_VID_CHECK) == 0)); /* * Make sure the client is consistent about its requests * for MAC addresses. I.e. all requests from the clients * must have the MAC_UNICAST_HW flag set or clear. */ if ((mcip->mci_state_flags & MCIS_UNICAST_HW) != 0 && !is_unicast_hw || (mcip->mci_state_flags & MCIS_UNICAST_HW) == 0 && is_unicast_hw) { err = EINVAL; goto bail_out; } } /* * Make sure the MAC address is not already used by * another MAC client defined on top of the same * underlying NIC. Unless we have MAC_CLIENT_FLAGS_MULTI_PRIMARY * set when we allow a passive client to be present which will * be activated when the currently active client goes away - this * works only with primary addresses. */ if ((check_dups || is_primary || is_vnic_primary) && mac_addr_in_use(mip, mac_addr, vid)) { /* * Must have set the multiple primary address flag when * we did a mac_client_open AND this should be a primary * MAC client AND there should not already be a passive * primary. If all is true then we let this succeed * even if the address is a dup. */ if ((mcip->mci_flags & MAC_CLIENT_FLAGS_MULTI_PRIMARY) == 0 || (mcip->mci_flags & MAC_CLIENT_FLAGS_PRIMARY) == 0 || mac_get_passive_primary_client(mip) != NULL) { *diag = MAC_DIAG_MACADDR_INUSE; err = EEXIST; goto bail_out; } ASSERT((mcip->mci_flags & MAC_CLIENT_FLAGS_PASSIVE_PRIMARY) == 0); mcip->mci_flags |= MAC_CLIENT_FLAGS_PASSIVE_PRIMARY; /* * Stash the unicast address handle, we will use it when * we set up the passive client. */ mcip->mci_p_unicast_list = muip; *mah = (mac_unicast_handle_t)muip; return (0); } err = mac_client_datapath_setup(mcip, vid, mac_addr, &mrp, is_primary || is_vnic_primary, muip); if (err != 0) goto bail_out; *mah = (mac_unicast_handle_t)muip; return (0); bail_out: if (fastpath_disabled) mac_fastpath_enable((mac_handle_t)mip); if (mcip->mci_state_flags & MCIS_EXCLUSIVE) { mip->mi_state_flags &= ~MIS_EXCLUSIVE; if (mip->mi_state_flags & MIS_LEGACY) { mip->mi_capab_legacy.ml_active_clear( mip->mi_driver); } } kmem_free(muip, sizeof (mac_unicast_impl_t)); return (err); } /* * Wrapper function to mac_unicast_add when we want to have the same mac * client open for two instances, one that is currently active and another * that will become active when the current one is removed. In this case * mac_unicast_add will return EGAIN and we will save the rx function and * arg which will be used when we activate the passive client in * mac_unicast_remove. */ int mac_unicast_add_set_rx(mac_client_handle_t mch, uint8_t *mac_addr, uint16_t flags, mac_unicast_handle_t *mah, uint16_t vid, mac_diag_t *diag, mac_rx_t rx_fn, void *arg) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; uint_t err; err = mac_unicast_add(mch, mac_addr, flags, mah, vid, diag); if (err != 0 && err != EAGAIN) return (err); if (err == EAGAIN) { if (rx_fn != NULL) { mcip->mci_rx_p_fn = rx_fn; mcip->mci_rx_p_arg = arg; } return (0); } if (rx_fn != NULL) mac_rx_set(mch, rx_fn, arg); return (err); } int mac_unicast_add(mac_client_handle_t mch, uint8_t *mac_addr, uint16_t flags, mac_unicast_handle_t *mah, uint16_t vid, mac_diag_t *diag) { mac_impl_t *mip = ((mac_client_impl_t *)mch)->mci_mip; uint_t err; i_mac_perim_enter(mip); err = i_mac_unicast_add(mch, mac_addr, flags, mah, vid, diag); i_mac_perim_exit(mip); return (err); } void mac_client_datapath_teardown(mac_client_handle_t mch, mac_unicast_impl_t *muip, flow_entry_t *flent) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; mac_impl_t *mip = mcip->mci_mip; /* * We would have initialized subflows etc. only if we brought up * the primary client and set the unicast unicast address etc. * Deactivate the flows. The flow entry will be removed from the * active flow tables, and the associated SRS, softrings etc will * be deleted. But the flow entry itself won't be destroyed, instead * it will continue to be archived off the the global flow hash * list, for a possible future activation when say IP is plumbed * again. */ mac_link_release_flows(mch); mip->mi_nactiveclients--; mac_update_single_active_client(mip); /* Tear down the data path */ mac_datapath_teardown(mcip, mcip->mci_flent, SRST_LINK); /* * Prevent any future access to the flow entry through the mci_flent * pointer by setting the mci_flent to NULL. Access to mci_flent in * mac_bcast_send is also under mi_rw_lock. */ rw_enter(&mip->mi_rw_lock, RW_WRITER); flent = mcip->mci_flent; mac_client_remove_flow_from_list(mcip, flent); if (mcip->mci_state_flags & MCIS_DESC_LOGGED) mcip->mci_state_flags &= ~MCIS_DESC_LOGGED; /* * This is the last unicast address being removed and there shouldn't * be any outbound data threads at this point coming down from mac * clients. We have waited for the data threads to finish before * starting dld_str_detach. Non-data threads must access TX SRS * under mi_rw_lock. */ rw_exit(&mip->mi_rw_lock); /* * Don't use FLOW_MARK with FE_MC_NO_DATAPATH, as the flow might * contain other flags, such as FE_CONDEMNED, which we need to * cleared. We don't call mac_flow_cleanup() for this unicast * flow as we have a already cleaned up SRSs etc. (via the teadown * path). We just clear the stats and reset the initial callback * function, the rest will be set when we call mac_flow_create, * if at all. */ mutex_enter(&flent->fe_lock); ASSERT(flent->fe_refcnt == 1 && flent->fe_mbg == NULL && flent->fe_tx_srs == NULL && flent->fe_rx_srs_cnt == 0); flent->fe_flags = FE_MC_NO_DATAPATH; flow_stat_destroy(flent); /* Initialize the receiver function to a safe routine */ flent->fe_cb_fn = (flow_fn_t)mac_pkt_drop; flent->fe_cb_arg1 = NULL; flent->fe_cb_arg2 = NULL; flent->fe_index = -1; mutex_exit(&flent->fe_lock); if (mip->mi_type->mt_brdcst_addr != NULL) { mac_bcast_delete(mcip, mip->mi_type->mt_brdcst_addr, muip->mui_vid); } if (mip->mi_nactiveclients == 1) { mac_capab_update((mac_handle_t)mip); mac_virtual_link_update(mip); } if (mcip->mci_state_flags & MCIS_EXCLUSIVE) { mip->mi_state_flags &= ~MIS_EXCLUSIVE; if (mip->mi_state_flags & MIS_LEGACY) mip->mi_capab_legacy.ml_active_clear(mip->mi_driver); } mcip->mci_state_flags &= ~MCIS_UNICAST_HW; if (mcip->mci_state_flags & MCIS_TAG_DISABLE) mcip->mci_state_flags &= ~MCIS_TAG_DISABLE; if (mcip->mci_state_flags & MCIS_STRIP_DISABLE) mcip->mci_state_flags &= ~MCIS_STRIP_DISABLE; if (mcip->mci_state_flags & MCIS_DISABLE_TX_VID_CHECK) mcip->mci_state_flags &= ~MCIS_DISABLE_TX_VID_CHECK; kmem_free(muip, sizeof (mac_unicast_impl_t)); /* * Disable fastpath if this is a VNIC or a VLAN. */ if (mcip->mci_state_flags & MCIS_IS_VNIC) mac_fastpath_enable((mac_handle_t)mip); mac_stop((mac_handle_t)mip); } /* * Remove a MAC address which was previously added by mac_unicast_add(). */ int mac_unicast_remove(mac_client_handle_t mch, mac_unicast_handle_t mah) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; mac_unicast_impl_t *muip = (mac_unicast_impl_t *)mah; mac_unicast_impl_t *pre; mac_impl_t *mip = mcip->mci_mip; flow_entry_t *flent; boolean_t isprimary = B_FALSE; i_mac_perim_enter(mip); if (mcip->mci_flags & MAC_CLIENT_FLAGS_VNIC_PRIMARY) { /* * Called made by the upper MAC client of a VNIC. * There's nothing much to do, the unicast address will * be removed by the VNIC driver when the VNIC is deleted, * but let's ensure that all our transmit is done before * the client does a mac_client_stop lest it trigger an * assert in the driver. */ ASSERT(muip->mui_vid == 0); mac_tx_client_flush(mcip); if ((mcip->mci_flags & MAC_CLIENT_FLAGS_PASSIVE_PRIMARY) != 0) { mcip->mci_flags &= ~MAC_CLIENT_FLAGS_PASSIVE_PRIMARY; if (mcip->mci_rx_p_fn != NULL) { mac_rx_set(mch, mcip->mci_rx_p_fn, mcip->mci_rx_p_arg); mcip->mci_rx_p_fn = NULL; mcip->mci_rx_p_arg = NULL; } kmem_free(muip, sizeof (mac_unicast_impl_t)); i_mac_perim_exit(mip); return (0); } mcip->mci_flags &= ~MAC_CLIENT_FLAGS_VNIC_PRIMARY; if (mcip->mci_state_flags & MCIS_TAG_DISABLE) mcip->mci_state_flags &= ~MCIS_TAG_DISABLE; if (mcip->mci_state_flags & MCIS_STRIP_DISABLE) mcip->mci_state_flags &= ~MCIS_STRIP_DISABLE; if (mcip->mci_state_flags & MCIS_DISABLE_TX_VID_CHECK) mcip->mci_state_flags &= ~MCIS_DISABLE_TX_VID_CHECK; kmem_free(muip, sizeof (mac_unicast_impl_t)); i_mac_perim_exit(mip); return (0); } ASSERT(muip != NULL); /* * We are removing a passive client, we haven't setup the datapath * for this yet, so nothing much to do. */ if ((mcip->mci_flags & MAC_CLIENT_FLAGS_PASSIVE_PRIMARY) != 0) { ASSERT((mcip->mci_flent->fe_flags & FE_MC_NO_DATAPATH) != 0); ASSERT(mcip->mci_p_unicast_list == muip); mcip->mci_flags &= ~MAC_CLIENT_FLAGS_PASSIVE_PRIMARY; mcip->mci_p_unicast_list = NULL; mcip->mci_rx_p_fn = NULL; mcip->mci_rx_p_arg = NULL; mcip->mci_state_flags &= ~MCIS_UNICAST_HW; if (mcip->mci_state_flags & MCIS_TAG_DISABLE) mcip->mci_state_flags &= ~MCIS_TAG_DISABLE; if (mcip->mci_state_flags & MCIS_STRIP_DISABLE) mcip->mci_state_flags &= ~MCIS_STRIP_DISABLE; if (mcip->mci_state_flags & MCIS_DISABLE_TX_VID_CHECK) mcip->mci_state_flags &= ~MCIS_DISABLE_TX_VID_CHECK; kmem_free(muip, sizeof (mac_unicast_impl_t)); i_mac_perim_exit(mip); return (0); } /* * Remove the VID from the list of client's VIDs. */ pre = mcip->mci_unicast_list; if (muip == pre) { mcip->mci_unicast_list = muip->mui_next; } else { while ((pre->mui_next != NULL) && (pre->mui_next != muip)) pre = pre->mui_next; ASSERT(pre->mui_next == muip); rw_enter(&mcip->mci_rw_lock, RW_WRITER); pre->mui_next = muip->mui_next; rw_exit(&mcip->mci_rw_lock); } if ((mcip->mci_flags & MAC_CLIENT_FLAGS_PRIMARY) && muip->mui_vid == 0) { mcip->mci_flags &= ~MAC_CLIENT_FLAGS_PRIMARY; isprimary = B_TRUE; } if (!mac_client_single_rcvr(mcip)) { /* * This MAC client is shared by more than one unicast * addresses, so we will just remove the flent * corresponding to the address being removed. We don't invoke * mac_rx_classify_flow_rem() since the additional flow is * not associated with its own separate set of SRS and rings, * and these constructs are still needed for the remaining * flows. */ flent = mac_client_get_flow(mcip, muip); ASSERT(flent != NULL); /* * The first one is disappearing, need to make sure * we replace it with another from the list of * shared clients. */ if (flent == mcip->mci_flent) flent = mac_client_swap_mciflent(mcip); mac_client_remove_flow_from_list(mcip, flent); mac_flow_remove(mip->mi_flow_tab, flent, B_FALSE); mac_flow_wait(flent, FLOW_DRIVER_UPCALL); /* * The multicast groups that were added by the client so * far must be removed from the brodcast domain corresponding * to the VID being removed. */ mac_client_bcast_refresh(mcip, mac_client_update_mcast, (void *)flent, B_FALSE); if (mip->mi_type->mt_brdcst_addr != NULL) { mac_bcast_delete(mcip, mip->mi_type->mt_brdcst_addr, muip->mui_vid); } FLOW_FINAL_REFRELE(flent); ASSERT(!(mcip->mci_state_flags & MCIS_EXCLUSIVE)); /* * Enable fastpath if this is a VNIC or a VLAN. */ if (mcip->mci_state_flags & MCIS_IS_VNIC) mac_fastpath_enable((mac_handle_t)mip); mac_stop((mac_handle_t)mip); i_mac_perim_exit(mip); return (0); } mac_client_datapath_teardown(mch, muip, flent); /* * If we are removing the primary, check if we have a passive primary * client that we need to activate now. */ if (!isprimary) { i_mac_perim_exit(mip); return (0); } mcip = mac_get_passive_primary_client(mip); if (mcip != NULL) { mac_resource_props_t mrp; mac_unicast_impl_t *muip; mcip->mci_flags &= ~MAC_CLIENT_FLAGS_PASSIVE_PRIMARY; bzero(&mrp, sizeof (mac_resource_props_t)); /* * Apply the property cached in the mac_impl_t to the * primary mac client. */ mac_get_resources((mac_handle_t)mip, &mrp); (void) mac_client_set_resources(mch, &mrp); ASSERT(mcip->mci_p_unicast_list != NULL); muip = mcip->mci_p_unicast_list; mcip->mci_p_unicast_list = NULL; if (mac_client_datapath_setup(mcip, VLAN_ID_NONE, mip->mi_addr, &mrp, B_TRUE, muip) == 0) { if (mcip->mci_rx_p_fn != NULL) { mac_rx_set(mch, mcip->mci_rx_p_fn, mcip->mci_rx_p_arg); mcip->mci_rx_p_fn = NULL; mcip->mci_rx_p_arg = NULL; } } else { kmem_free(muip, sizeof (mac_unicast_impl_t)); } } i_mac_perim_exit(mip); return (0); } /* * Multicast add function invoked by MAC clients. */ int mac_multicast_add(mac_client_handle_t mch, const uint8_t *addr) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; mac_impl_t *mip = mcip->mci_mip; flow_entry_t *flent = mcip->mci_flent_list; flow_entry_t *prev_fe = NULL; uint16_t vid; int err = 0; /* Verify the address is a valid multicast address */ if ((err = mip->mi_type->mt_ops.mtops_multicst_verify(addr, mip->mi_pdata)) != 0) return (err); i_mac_perim_enter(mip); while (flent != NULL) { vid = i_mac_flow_vid(flent); err = mac_bcast_add((mac_client_impl_t *)mch, addr, vid, MAC_ADDRTYPE_MULTICAST); if (err != 0) break; prev_fe = flent; flent = flent->fe_client_next; } /* * If we failed adding, then undo all, rather than partial * success. */ if (flent != NULL && prev_fe != NULL) { flent = mcip->mci_flent_list; while (flent != prev_fe->fe_client_next) { vid = i_mac_flow_vid(flent); mac_bcast_delete((mac_client_impl_t *)mch, addr, vid); flent = flent->fe_client_next; } } i_mac_perim_exit(mip); return (err); } /* * Multicast delete function invoked by MAC clients. */ void mac_multicast_remove(mac_client_handle_t mch, const uint8_t *addr) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; mac_impl_t *mip = mcip->mci_mip; flow_entry_t *flent; uint16_t vid; i_mac_perim_enter(mip); for (flent = mcip->mci_flent_list; flent != NULL; flent = flent->fe_client_next) { vid = i_mac_flow_vid(flent); mac_bcast_delete((mac_client_impl_t *)mch, addr, vid); } i_mac_perim_exit(mip); } /* * When a MAC client desires to capture packets on an interface, * it registers a promiscuous call back with mac_promisc_add(). * There are three types of promiscuous callbacks: * * * MAC_CLIENT_PROMISC_ALL * Captures all packets sent and received by the MAC client, * the physical interface, as well as all other MAC clients * defined on top of the same MAC. * * * MAC_CLIENT_PROMISC_FILTERED * Captures all packets sent and received by the MAC client, * plus all multicast traffic sent and received by the phyisical * interface and the other MAC clients. * * * MAC_CLIENT_PROMISC_MULTI * Captures all broadcast and multicast packets sent and * received by the MAC clients as well as the physical interface. * * In all cases, the underlying MAC is put in promiscuous mode. */ int mac_promisc_add(mac_client_handle_t mch, mac_client_promisc_type_t type, mac_rx_t fn, void *arg, mac_promisc_handle_t *mphp, uint16_t flags) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; mac_impl_t *mip = mcip->mci_mip; mac_promisc_impl_t *mpip; mac_cb_info_t *mcbi; int rc; i_mac_perim_enter(mip); if ((rc = mac_start((mac_handle_t)mip)) != 0) { i_mac_perim_exit(mip); return (rc); } if ((mcip->mci_state_flags & MCIS_IS_VNIC) && type == MAC_CLIENT_PROMISC_ALL) { /* * The function is being invoked by the upper MAC client * of a VNIC. The VNIC should only see the traffic * it is entitled to. */ type = MAC_CLIENT_PROMISC_FILTERED; } /* * Turn on promiscuous mode for the underlying NIC. * This is needed even for filtered callbacks which * expect to receive all multicast traffic on the wire. * * Physical promiscuous mode should not be turned on if * MAC_PROMISC_FLAGS_NO_PHYS is set. */ if ((flags & MAC_PROMISC_FLAGS_NO_PHYS) == 0) { if ((rc = i_mac_promisc_set(mip, B_TRUE)) != 0) { mac_stop((mac_handle_t)mip); i_mac_perim_exit(mip); return (rc); } } mpip = kmem_cache_alloc(mac_promisc_impl_cache, KM_SLEEP); mpip->mpi_type = type; mpip->mpi_fn = fn; mpip->mpi_arg = arg; mpip->mpi_mcip = mcip; mpip->mpi_no_tx_loop = ((flags & MAC_PROMISC_FLAGS_NO_TX_LOOP) != 0); mpip->mpi_no_phys = ((flags & MAC_PROMISC_FLAGS_NO_PHYS) != 0); mpip->mpi_strip_vlan_tag = ((flags & MAC_PROMISC_FLAGS_VLAN_TAG_STRIP) != 0); mpip->mpi_no_copy = ((flags & MAC_PROMISC_FLAGS_NO_COPY) != 0); mcbi = &mip->mi_promisc_cb_info; mutex_enter(mcbi->mcbi_lockp); mac_callback_add(&mip->mi_promisc_cb_info, &mcip->mci_promisc_list, &mpip->mpi_mci_link); mac_callback_add(&mip->mi_promisc_cb_info, &mip->mi_promisc_list, &mpip->mpi_mi_link); mutex_exit(mcbi->mcbi_lockp); *mphp = (mac_promisc_handle_t)mpip; i_mac_perim_exit(mip); return (0); } /* * Remove a multicast address previously aded through mac_promisc_add(). */ void mac_promisc_remove(mac_promisc_handle_t mph) { mac_promisc_impl_t *mpip = (mac_promisc_impl_t *)mph; mac_client_impl_t *mcip = mpip->mpi_mcip; mac_impl_t *mip = mcip->mci_mip; mac_cb_info_t *mcbi; int rv; i_mac_perim_enter(mip); /* * Even if the device can't be reset into normal mode, we still * need to clear the client promisc callbacks. The client may want * to close the mac end point and we can't have stale callbacks. */ if (!(mpip->mpi_no_phys)) { if ((rv = i_mac_promisc_set(mip, B_FALSE)) != 0) { cmn_err(CE_WARN, "%s: failed to switch OFF promiscuous" " mode because of error 0x%x", mip->mi_name, rv); } } mcbi = &mip->mi_promisc_cb_info; mutex_enter(mcbi->mcbi_lockp); if (mac_callback_remove(mcbi, &mip->mi_promisc_list, &mpip->mpi_mi_link)) { VERIFY(mac_callback_remove(&mip->mi_promisc_cb_info, &mcip->mci_promisc_list, &mpip->mpi_mci_link)); kmem_cache_free(mac_promisc_impl_cache, mpip); } else { mac_callback_remove_wait(&mip->mi_promisc_cb_info); } mutex_exit(mcbi->mcbi_lockp); mac_stop((mac_handle_t)mip); i_mac_perim_exit(mip); } /* * Reference count the number of active Tx threads. MCI_TX_QUIESCE indicates * that a control operation wants to quiesce the Tx data flow in which case * we return an error. Holding any of the per cpu locks ensures that the * mci_tx_flag won't change. * * 'CPU' must be accessed just once and used to compute the index into the * percpu array, and that index must be used for the entire duration of the * packet send operation. Note that the thread may be preempted and run on * another cpu any time and so we can't use 'CPU' more than once for the * operation. */ #define MAC_TX_TRY_HOLD(mcip, mytx, error) \ { \ (error) = 0; \ (mytx) = &(mcip)->mci_tx_pcpu[CPU->cpu_seqid & mac_tx_percpu_cnt]; \ mutex_enter(&(mytx)->pcpu_tx_lock); \ if (!((mcip)->mci_tx_flag & MCI_TX_QUIESCE)) { \ (mytx)->pcpu_tx_refcnt++; \ } else { \ (error) = -1; \ } \ mutex_exit(&(mytx)->pcpu_tx_lock); \ } /* * Release the reference. If needed, signal any control operation waiting * for Tx quiescence. The wait and signal are always done using the * mci_tx_pcpu[0]'s lock */ #define MAC_TX_RELE(mcip, mytx) { \ mutex_enter(&(mytx)->pcpu_tx_lock); \ if (--(mytx)->pcpu_tx_refcnt == 0 && \ (mcip)->mci_tx_flag & MCI_TX_QUIESCE) { \ mutex_exit(&(mytx)->pcpu_tx_lock); \ mutex_enter(&(mcip)->mci_tx_pcpu[0].pcpu_tx_lock); \ cv_signal(&(mcip)->mci_tx_cv); \ mutex_exit(&(mcip)->mci_tx_pcpu[0].pcpu_tx_lock); \ } else { \ mutex_exit(&(mytx)->pcpu_tx_lock); \ } \ } /* * Bump the count of the number of active Tx threads. This is maintained as * a per CPU counter. On (CMT kind of) machines with large number of CPUs, * a single mci_tx_lock may become contended. However a count of the total * number of Tx threads per client is needed in order to quiesce the Tx side * prior to reassigning a Tx ring dynamically to another client. The thread * that needs to quiesce the Tx traffic grabs all the percpu locks and checks * the sum of the individual percpu refcnts. Each Tx data thread only grabs * its own percpu lock and increments its own refcnt. */ void * mac_tx_hold(mac_client_handle_t mch) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; mac_tx_percpu_t *mytx; int error; MAC_TX_TRY_HOLD(mcip, mytx, error); return (error == 0 ? (void *)mytx : NULL); } void mac_tx_rele(mac_client_handle_t mch, void *mytx_handle) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; mac_tx_percpu_t *mytx = mytx_handle; MAC_TX_RELE(mcip, mytx) } /* * Send function invoked by MAC clients. */ mac_tx_cookie_t mac_tx(mac_client_handle_t mch, mblk_t *mp_chain, uintptr_t hint, uint16_t flag, mblk_t **ret_mp) { mac_tx_cookie_t cookie; int error; mac_tx_percpu_t *mytx; mac_soft_ring_set_t *srs; flow_entry_t *flent; boolean_t is_subflow = B_FALSE; mac_client_impl_t *mcip = (mac_client_impl_t *)mch; mac_impl_t *mip = mcip->mci_mip; mac_srs_tx_t *srs_tx; /* * Check whether the active Tx threads count is bumped already. */ if (!(flag & MAC_TX_NO_HOLD)) { MAC_TX_TRY_HOLD(mcip, mytx, error); if (error != 0) { freemsgchain(mp_chain); return (NULL); } } if (mcip->mci_subflow_tab != NULL && mcip->mci_subflow_tab->ft_flow_count > 0 && mac_flow_lookup(mcip->mci_subflow_tab, mp_chain, FLOW_OUTBOUND, &flent) == 0) { /* * The main assumption here is that if in the event * we get a chain, all the packets will be classified * to the same Flow/SRS. If this changes for any * reason, the following logic should change as well. * I suppose the fanout_hint also assumes this . */ ASSERT(flent != NULL); is_subflow = B_TRUE; } else { flent = mcip->mci_flent; } srs = flent->fe_tx_srs; /* * This is to avoid panics with PF_PACKET that can call mac_tx() * against an interface that is not capable of sending. A rewrite * of the mac datapath is required to remove this limitation. */ if (srs == NULL) { if (!(flag & MAC_TX_NO_HOLD)) MAC_TX_RELE(mcip, mytx); freemsgchain(mp_chain); return (NULL); } srs_tx = &srs->srs_tx; if (srs_tx->st_mode == SRS_TX_DEFAULT && (srs->srs_state & SRS_ENQUEUED) == 0 && mip->mi_nactiveclients == 1 && mip->mi_promisc_list == NULL && mp_chain->b_next == NULL) { uint64_t obytes; /* * Since dls always opens the underlying MAC, nclients equals * to 1 means that the only active client is dls itself acting * as a primary client of the MAC instance. Since dls will not * send tagged packets in that case, and dls is trusted to send * packets for its allowed VLAN(s), the VLAN tag insertion and * check is required only if nclients is greater than 1. */ if (mip->mi_nclients > 1) { if (MAC_VID_CHECK_NEEDED(mcip)) { int err = 0; MAC_VID_CHECK(mcip, mp_chain, err); if (err != 0) { freemsg(mp_chain); mcip->mci_stat_oerrors++; goto done; } } if (MAC_TAG_NEEDED(mcip)) { mp_chain = mac_add_vlan_tag(mp_chain, 0, mac_client_vid(mch)); if (mp_chain == NULL) { mcip->mci_stat_oerrors++; goto done; } } } obytes = (mp_chain->b_cont == NULL ? MBLKL(mp_chain) : msgdsize(mp_chain)); MAC_TX(mip, srs_tx->st_arg2, mp_chain, ((mcip->mci_state_flags & MCIS_SHARE_BOUND) != 0)); if (mp_chain == NULL) { cookie = NULL; mcip->mci_stat_obytes += obytes; mcip->mci_stat_opackets += 1; if ((srs->srs_type & SRST_FLOW) != 0) { FLOW_STAT_UPDATE(flent, obytes, obytes); FLOW_STAT_UPDATE(flent, opackets, 1); } } else { mutex_enter(&srs->srs_lock); cookie = mac_tx_srs_no_desc(srs, mp_chain, flag, ret_mp); mutex_exit(&srs->srs_lock); } } else { cookie = srs_tx->st_func(srs, mp_chain, hint, flag, ret_mp); } done: if (is_subflow) FLOW_REFRELE(flent); if (!(flag & MAC_TX_NO_HOLD)) MAC_TX_RELE(mcip, mytx); return (cookie); } /* * mac_tx_is_blocked * * Given a cookie, it returns if the ring identified by the cookie is * flow-controlled or not. If NULL is passed in place of a cookie, * then it finds out if any of the underlying rings belonging to the * SRS is flow controlled or not and returns that status. */ /* ARGSUSED */ boolean_t mac_tx_is_flow_blocked(mac_client_handle_t mch, mac_tx_cookie_t cookie) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; mac_soft_ring_set_t *mac_srs; mac_soft_ring_t *sringp; boolean_t blocked = B_FALSE; mac_tx_percpu_t *mytx; int err; int i; /* * Bump the reference count so that mac_srs won't be deleted. * If the client is currently quiesced and we failed to bump * the reference, return B_TRUE so that flow control stays * as enabled. * * Flow control will then be disabled once the client is no * longer quiesced. */ MAC_TX_TRY_HOLD(mcip, mytx, err); if (err != 0) return (B_TRUE); if ((mac_srs = MCIP_TX_SRS(mcip)) == NULL) { MAC_TX_RELE(mcip, mytx); return (B_FALSE); } mutex_enter(&mac_srs->srs_lock); if (mac_srs->srs_tx.st_mode == SRS_TX_FANOUT) { if (cookie != NULL) { sringp = (mac_soft_ring_t *)cookie; mutex_enter(&sringp->s_ring_lock); if (sringp->s_ring_state & S_RING_TX_HIWAT) blocked = B_TRUE; mutex_exit(&sringp->s_ring_lock); } else { for (i = 0; i < mac_srs->srs_oth_ring_count; i++) { sringp = mac_srs->srs_oth_soft_rings[i]; mutex_enter(&sringp->s_ring_lock); if (sringp->s_ring_state & S_RING_TX_HIWAT) { blocked = B_TRUE; mutex_exit(&sringp->s_ring_lock); break; } mutex_exit(&sringp->s_ring_lock); } } } else { blocked = (mac_srs->srs_state & SRS_TX_HIWAT); } mutex_exit(&mac_srs->srs_lock); MAC_TX_RELE(mcip, mytx); return (blocked); } /* * Check if the MAC client is the primary MAC client. */ boolean_t mac_is_primary_client(mac_client_impl_t *mcip) { return (mcip->mci_flags & MAC_CLIENT_FLAGS_PRIMARY); } void mac_ioctl(mac_handle_t mh, queue_t *wq, mblk_t *bp) { mac_impl_t *mip = (mac_impl_t *)mh; int cmd = ((struct iocblk *)bp->b_rptr)->ioc_cmd; if ((cmd == ND_GET && (mip->mi_callbacks->mc_callbacks & MC_GETPROP)) || (cmd == ND_SET && (mip->mi_callbacks->mc_callbacks & MC_SETPROP))) { /* * If ndd props were registered, call them. * Note that ndd ioctls are Obsolete */ mac_ndd_ioctl(mip, wq, bp); return; } /* * Call the driver to handle the ioctl. The driver may not support * any ioctls, in which case we reply with a NAK on its behalf. */ if (mip->mi_callbacks->mc_callbacks & MC_IOCTL) mip->mi_ioctl(mip->mi_driver, wq, bp); else miocnak(wq, bp, 0, EINVAL); } /* * Return the link state of the specified MAC instance. */ link_state_t mac_link_get(mac_handle_t mh) { return (((mac_impl_t *)mh)->mi_linkstate); } /* * Add a mac client specified notification callback. Please see the comments * above mac_callback_add() for general information about mac callback * addition/deletion in the presence of mac callback list walkers */ mac_notify_handle_t mac_notify_add(mac_handle_t mh, mac_notify_t notify_fn, void *arg) { mac_impl_t *mip = (mac_impl_t *)mh; mac_notify_cb_t *mncb; mac_cb_info_t *mcbi; /* * Allocate a notify callback structure, fill in the details and * use the mac callback list manipulation functions to chain into * the list of callbacks. */ mncb = kmem_zalloc(sizeof (mac_notify_cb_t), KM_SLEEP); mncb->mncb_fn = notify_fn; mncb->mncb_arg = arg; mncb->mncb_mip = mip; mncb->mncb_link.mcb_objp = mncb; mncb->mncb_link.mcb_objsize = sizeof (mac_notify_cb_t); mncb->mncb_link.mcb_flags = MCB_NOTIFY_CB_T; mcbi = &mip->mi_notify_cb_info; i_mac_perim_enter(mip); mutex_enter(mcbi->mcbi_lockp); mac_callback_add(&mip->mi_notify_cb_info, &mip->mi_notify_cb_list, &mncb->mncb_link); mutex_exit(mcbi->mcbi_lockp); i_mac_perim_exit(mip); return ((mac_notify_handle_t)mncb); } void mac_notify_remove_wait(mac_handle_t mh) { mac_impl_t *mip = (mac_impl_t *)mh; mac_cb_info_t *mcbi = &mip->mi_notify_cb_info; mutex_enter(mcbi->mcbi_lockp); mac_callback_remove_wait(&mip->mi_notify_cb_info); mutex_exit(mcbi->mcbi_lockp); } /* * Remove a mac client specified notification callback */ int mac_notify_remove(mac_notify_handle_t mnh, boolean_t wait) { mac_notify_cb_t *mncb = (mac_notify_cb_t *)mnh; mac_impl_t *mip = mncb->mncb_mip; mac_cb_info_t *mcbi; int err = 0; mcbi = &mip->mi_notify_cb_info; i_mac_perim_enter(mip); mutex_enter(mcbi->mcbi_lockp); ASSERT(mncb->mncb_link.mcb_objp == mncb); /* * If there aren't any list walkers, the remove would succeed * inline, else we wait for the deferred remove to complete */ if (mac_callback_remove(&mip->mi_notify_cb_info, &mip->mi_notify_cb_list, &mncb->mncb_link)) { kmem_free(mncb, sizeof (mac_notify_cb_t)); } else { err = EBUSY; } mutex_exit(mcbi->mcbi_lockp); i_mac_perim_exit(mip); /* * If we failed to remove the notification callback and "wait" is set * to be B_TRUE, wait for the callback to finish after we exit the * mac perimeter. */ if (err != 0 && wait) { mac_notify_remove_wait((mac_handle_t)mip); return (0); } return (err); } /* * Associate resource management callbacks with the specified MAC * clients. */ void mac_resource_set_common(mac_client_handle_t mch, mac_resource_add_t add, mac_resource_remove_t remove, mac_resource_quiesce_t quiesce, mac_resource_restart_t restart, mac_resource_bind_t bind, void *arg) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; mcip->mci_resource_add = add; mcip->mci_resource_remove = remove; mcip->mci_resource_quiesce = quiesce; mcip->mci_resource_restart = restart; mcip->mci_resource_bind = bind; mcip->mci_resource_arg = arg; if (arg == NULL) mcip->mci_state_flags &= ~MCIS_CLIENT_POLL_CAPABLE; } void mac_resource_set(mac_client_handle_t mch, mac_resource_add_t add, void *arg) { /* update the 'resource_add' callback */ mac_resource_set_common(mch, add, NULL, NULL, NULL, NULL, arg); } /* * Sets up the client resources and enable the polling interface over all the * SRS's and the soft rings of the client */ void mac_client_poll_enable(mac_client_handle_t mch) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; mac_soft_ring_set_t *mac_srs; flow_entry_t *flent; int i; flent = mcip->mci_flent; ASSERT(flent != NULL); for (i = 0; i < flent->fe_rx_srs_cnt; i++) { mac_srs = (mac_soft_ring_set_t *)flent->fe_rx_srs[i]; ASSERT(mac_srs->srs_mcip == mcip); mac_srs_client_poll_enable(mcip, mac_srs); } } /* * Tears down the client resources and disable the polling interface over all * the SRS's and the soft rings of the client */ void mac_client_poll_disable(mac_client_handle_t mch) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; mac_soft_ring_set_t *mac_srs; flow_entry_t *flent; int i; flent = mcip->mci_flent; ASSERT(flent != NULL); for (i = 0; i < flent->fe_rx_srs_cnt; i++) { mac_srs = (mac_soft_ring_set_t *)flent->fe_rx_srs[i]; ASSERT(mac_srs->srs_mcip == mcip); mac_srs_client_poll_disable(mcip, mac_srs); } } /* * Associate the CPUs specified by the given property with a MAC client. */ int mac_cpu_set(mac_client_handle_t mch, mac_resource_props_t *mrp) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; mac_impl_t *mip = mcip->mci_mip; int err = 0; ASSERT(MAC_PERIM_HELD((mac_handle_t)mip)); if ((err = mac_validate_props(mrp)) != 0) return (err); if (MCIP_DATAPATH_SETUP(mcip)) mac_flow_modify(mip->mi_flow_tab, mcip->mci_flent, mrp); mac_update_resources(mrp, MCIP_RESOURCE_PROPS(mcip), B_FALSE); return (0); } /* * Apply the specified properties to the specified MAC client. */ int mac_client_set_resources(mac_client_handle_t mch, mac_resource_props_t *mrp) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; mac_impl_t *mip = mcip->mci_mip; int err = 0; i_mac_perim_enter(mip); if ((mrp->mrp_mask & MRP_MAXBW) || (mrp->mrp_mask & MRP_PRIORITY)) { err = mac_resource_ctl_set(mch, mrp); if (err != 0) { i_mac_perim_exit(mip); return (err); } } if (mrp->mrp_mask & MRP_CPUS) err = mac_cpu_set(mch, mrp); i_mac_perim_exit(mip); return (err); } /* * Return the properties currently associated with the specified MAC client. */ void mac_client_get_resources(mac_client_handle_t mch, mac_resource_props_t *mrp) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; mac_resource_props_t *mcip_mrp = MCIP_RESOURCE_PROPS(mcip); bcopy(mcip_mrp, mrp, sizeof (mac_resource_props_t)); } /* * Pass a copy of the specified packet to the promiscuous callbacks * of the specified MAC. * * If sender is NULL, the function is being invoked for a packet chain * received from the wire. If sender is non-NULL, it points to * the MAC client from which the packet is being sent. * * The packets are distributed to the promiscuous callbacks as follows: * * - all packets are sent to the MAC_CLIENT_PROMISC_ALL callbacks * - all broadcast and multicast packets are sent to the * MAC_CLIENT_PROMISC_FILTER and MAC_CLIENT_PROMISC_MULTI. * * The unicast packets of MAC_CLIENT_PROMISC_FILTER callbacks are dispatched * after classification by mac_rx_deliver(). */ static void mac_promisc_dispatch_one(mac_promisc_impl_t *mpip, mblk_t *mp, boolean_t loopback) { mblk_t *mp_copy, *mp_next; if (!mpip->mpi_no_copy || mpip->mpi_strip_vlan_tag) { mp_copy = copymsg(mp); if (mp_copy == NULL) return; if (mpip->mpi_strip_vlan_tag) { mp_copy = mac_strip_vlan_tag_chain(mp_copy); if (mp_copy == NULL) return; } mp_next = NULL; } else { mp_copy = mp; mp_next = mp->b_next; } mp_copy->b_next = NULL; mpip->mpi_fn(mpip->mpi_arg, NULL, mp_copy, loopback); if (mp_copy == mp) mp->b_next = mp_next; } /* * Return the VID of a packet. Zero if the packet is not tagged. */ static uint16_t mac_ether_vid(mblk_t *mp) { struct ether_header *eth = (struct ether_header *)mp->b_rptr; if (ntohs(eth->ether_type) == ETHERTYPE_VLAN) { struct ether_vlan_header *t_evhp = (struct ether_vlan_header *)mp->b_rptr; return (VLAN_ID(ntohs(t_evhp->ether_tci))); } return (0); } /* * Return whether the specified packet contains a multicast or broadcast * destination MAC address. */ static boolean_t mac_is_mcast(mac_impl_t *mip, mblk_t *mp) { mac_header_info_t hdr_info; if (mac_header_info((mac_handle_t)mip, mp, &hdr_info) != 0) return (B_FALSE); return ((hdr_info.mhi_dsttype == MAC_ADDRTYPE_BROADCAST) || (hdr_info.mhi_dsttype == MAC_ADDRTYPE_MULTICAST)); } /* * Send a copy of an mblk chain to the MAC clients of the specified MAC. * "sender" points to the sender MAC client for outbound packets, and * is set to NULL for inbound packets. */ void mac_promisc_dispatch(mac_impl_t *mip, mblk_t *mp_chain, mac_client_impl_t *sender) { mac_promisc_impl_t *mpip; mac_cb_t *mcb; mblk_t *mp; boolean_t is_mcast, is_sender; MAC_PROMISC_WALKER_INC(mip); for (mp = mp_chain; mp != NULL; mp = mp->b_next) { is_mcast = mac_is_mcast(mip, mp); /* send packet to interested callbacks */ for (mcb = mip->mi_promisc_list; mcb != NULL; mcb = mcb->mcb_nextp) { mpip = (mac_promisc_impl_t *)mcb->mcb_objp; is_sender = (mpip->mpi_mcip == sender); if (is_sender && mpip->mpi_no_tx_loop) /* * The sender doesn't want to receive * copies of the packets it sends. */ continue; /* this client doesn't need any packets (bridge) */ if (mpip->mpi_fn == NULL) continue; /* * For an ethernet MAC, don't displatch a multicast * packet to a non-PROMISC_ALL callbacks unless the VID * of the packet matches the VID of the client. */ if (is_mcast && mpip->mpi_type != MAC_CLIENT_PROMISC_ALL && !mac_client_check_flow_vid(mpip->mpi_mcip, mac_ether_vid(mp))) continue; if (is_sender || mpip->mpi_type == MAC_CLIENT_PROMISC_ALL || is_mcast) mac_promisc_dispatch_one(mpip, mp, is_sender); } } MAC_PROMISC_WALKER_DCR(mip); } void mac_promisc_client_dispatch(mac_client_impl_t *mcip, mblk_t *mp_chain) { mac_impl_t *mip = mcip->mci_mip; mac_promisc_impl_t *mpip; boolean_t is_mcast; mblk_t *mp; mac_cb_t *mcb; /* * The unicast packets for the MAC client still * need to be delivered to the MAC_CLIENT_PROMISC_FILTERED * promiscuous callbacks. The broadcast and multicast * packets were delivered from mac_rx(). */ MAC_PROMISC_WALKER_INC(mip); for (mp = mp_chain; mp != NULL; mp = mp->b_next) { is_mcast = mac_is_mcast(mip, mp); for (mcb = mcip->mci_promisc_list; mcb != NULL; mcb = mcb->mcb_nextp) { mpip = (mac_promisc_impl_t *)mcb->mcb_objp; if (mpip->mpi_type == MAC_CLIENT_PROMISC_FILTERED && !is_mcast) { mac_promisc_dispatch_one(mpip, mp, B_FALSE); } } } MAC_PROMISC_WALKER_DCR(mip); } /* * Return the margin value currently assigned to the specified MAC instance. */ void mac_margin_get(mac_handle_t mh, uint32_t *marginp) { mac_impl_t *mip = (mac_impl_t *)mh; rw_enter(&(mip->mi_rw_lock), RW_READER); *marginp = mip->mi_margin; rw_exit(&(mip->mi_rw_lock)); } /* * mac_info_get() is used for retrieving the mac_info when a DL_INFO_REQ is * issued before a DL_ATTACH_REQ. we walk the i_mac_impl_hash table and find * the first mac_impl_t with a matching driver name; then we copy its mac_info_t * to the caller. we do all this with i_mac_impl_lock held so the mac_impl_t * cannot disappear while we are accessing it. */ typedef struct i_mac_info_state_s { const char *mi_name; mac_info_t *mi_infop; } i_mac_info_state_t; /*ARGSUSED*/ static uint_t i_mac_info_walker(mod_hash_key_t key, mod_hash_val_t *val, void *arg) { i_mac_info_state_t *statep = arg; mac_impl_t *mip = (mac_impl_t *)val; if (mip->mi_state_flags & MIS_DISABLED) return (MH_WALK_CONTINUE); if (strcmp(statep->mi_name, ddi_driver_name(mip->mi_dip)) != 0) return (MH_WALK_CONTINUE); statep->mi_infop = &mip->mi_info; return (MH_WALK_TERMINATE); } boolean_t mac_info_get(const char *name, mac_info_t *minfop) { i_mac_info_state_t state; rw_enter(&i_mac_impl_lock, RW_READER); state.mi_name = name; state.mi_infop = NULL; mod_hash_walk(i_mac_impl_hash, i_mac_info_walker, &state); if (state.mi_infop == NULL) { rw_exit(&i_mac_impl_lock); return (B_FALSE); } *minfop = *state.mi_infop; rw_exit(&i_mac_impl_lock); return (B_TRUE); } /* * To get the capabilities that MAC layer cares about, such as rings, factory * mac address, vnic or not, it should directly invoke this function. If the * link is part of a bridge, then the only "capability" it has is the inability * to do zero copy. */ boolean_t i_mac_capab_get(mac_handle_t mh, mac_capab_t cap, void *cap_data) { mac_impl_t *mip = (mac_impl_t *)mh; if (mip->mi_bridge_link != NULL) return (cap == MAC_CAPAB_NO_ZCOPY); else if (mip->mi_callbacks->mc_callbacks & MC_GETCAPAB) return (mip->mi_getcapab(mip->mi_driver, cap, cap_data)); else return (B_FALSE); } /* * Capability query function. If number of active mac clients is greater than * 1, only limited capabilities can be advertised to the caller no matter the * driver has certain capability or not. Else, we query the driver to get the * capability. */ boolean_t mac_capab_get(mac_handle_t mh, mac_capab_t cap, void *cap_data) { mac_impl_t *mip = (mac_impl_t *)mh; /* * if mi_nactiveclients > 1, only MAC_CAPAB_LEGACY, MAC_CAPAB_HCKSUM, * MAC_CAPAB_NO_NATIVEVLAN and MAC_CAPAB_NO_ZCOPY can be advertised. */ if (mip->mi_nactiveclients > 1) { switch (cap) { case MAC_CAPAB_NO_NATIVEVLAN: case MAC_CAPAB_NO_ZCOPY: return (B_TRUE); case MAC_CAPAB_LEGACY: case MAC_CAPAB_HCKSUM: break; default: return (B_FALSE); } } /* else get capab from driver */ return (i_mac_capab_get(mh, cap, cap_data)); } boolean_t mac_sap_verify(mac_handle_t mh, uint32_t sap, uint32_t *bind_sap) { mac_impl_t *mip = (mac_impl_t *)mh; return (mip->mi_type->mt_ops.mtops_sap_verify(sap, bind_sap, mip->mi_pdata)); } mblk_t * mac_header(mac_handle_t mh, const uint8_t *daddr, uint32_t sap, mblk_t *payload, size_t extra_len) { mac_impl_t *mip = (mac_impl_t *)mh; const uint8_t *hdr_daddr; /* * If the MAC is point-to-point with a fixed destination address, then * we must always use that destination in the MAC header. */ hdr_daddr = (mip->mi_dstaddr_set ? mip->mi_dstaddr : daddr); return (mip->mi_type->mt_ops.mtops_header(mip->mi_addr, hdr_daddr, sap, mip->mi_pdata, payload, extra_len)); } int mac_header_info(mac_handle_t mh, mblk_t *mp, mac_header_info_t *mhip) { mac_impl_t *mip = (mac_impl_t *)mh; return (mip->mi_type->mt_ops.mtops_header_info(mp, mip->mi_pdata, mhip)); } mblk_t * mac_header_cook(mac_handle_t mh, mblk_t *mp) { mac_impl_t *mip = (mac_impl_t *)mh; if (mip->mi_type->mt_ops.mtops_ops & MTOPS_HEADER_COOK) { if (DB_REF(mp) > 1) { mblk_t *newmp = copymsg(mp); if (newmp == NULL) return (NULL); freemsg(mp); mp = newmp; } return (mip->mi_type->mt_ops.mtops_header_cook(mp, mip->mi_pdata)); } return (mp); } mblk_t * mac_header_uncook(mac_handle_t mh, mblk_t *mp) { mac_impl_t *mip = (mac_impl_t *)mh; if (mip->mi_type->mt_ops.mtops_ops & MTOPS_HEADER_UNCOOK) { if (DB_REF(mp) > 1) { mblk_t *newmp = copymsg(mp); if (newmp == NULL) return (NULL); freemsg(mp); mp = newmp; } return (mip->mi_type->mt_ops.mtops_header_uncook(mp, mip->mi_pdata)); } return (mp); } uint_t mac_addr_len(mac_handle_t mh) { mac_impl_t *mip = (mac_impl_t *)mh; return (mip->mi_type->mt_addr_length); } /* True if a MAC is a VNIC */ boolean_t mac_is_vnic(mac_handle_t mh) { return (((mac_impl_t *)mh)->mi_state_flags & MIS_IS_VNIC); } mac_handle_t mac_get_lower_mac_handle(mac_handle_t mh) { mac_impl_t *mip = (mac_impl_t *)mh; ASSERT(mac_is_vnic(mh)); return (((vnic_t *)mip->mi_driver)->vn_lower_mh); } void mac_update_resources(mac_resource_props_t *nmrp, mac_resource_props_t *cmrp, boolean_t is_user_flow) { if (nmrp != NULL && cmrp != NULL) { if (nmrp->mrp_mask & MRP_PRIORITY) { if (nmrp->mrp_priority == MPL_RESET) { cmrp->mrp_mask &= ~MRP_PRIORITY; if (is_user_flow) { cmrp->mrp_priority = MPL_SUBFLOW_DEFAULT; } else { cmrp->mrp_priority = MPL_LINK_DEFAULT; } } else { cmrp->mrp_mask |= MRP_PRIORITY; cmrp->mrp_priority = nmrp->mrp_priority; } } if (nmrp->mrp_mask & MRP_MAXBW) { cmrp->mrp_maxbw = nmrp->mrp_maxbw; if (nmrp->mrp_maxbw == MRP_MAXBW_RESETVAL) cmrp->mrp_mask &= ~MRP_MAXBW; else cmrp->mrp_mask |= MRP_MAXBW; } if (nmrp->mrp_mask & MRP_CPUS) MAC_COPY_CPUS(nmrp, cmrp); } } /* * i_mac_set_resources: * * This routine associates properties with the primary MAC client of * the specified MAC instance. * - Cache the properties in mac_impl_t * - Apply the properties to the primary MAC client if exists */ int i_mac_set_resources(mac_handle_t mh, mac_resource_props_t *mrp) { mac_impl_t *mip = (mac_impl_t *)mh; mac_client_impl_t *mcip; int err = 0; uint32_t resmask, newresmask; mac_resource_props_t tmrp, umrp; ASSERT(MAC_PERIM_HELD((mac_handle_t)mip)); err = mac_validate_props(mrp); if (err != 0) return (err); bcopy(&mip->mi_resource_props, &umrp, sizeof (mac_resource_props_t)); resmask = umrp.mrp_mask; mac_update_resources(mrp, &umrp, B_FALSE); newresmask = umrp.mrp_mask; if (resmask == 0 && newresmask != 0) { /* * Bandwidth, priority or cpu link properties configured, * must disable fastpath. */ if ((err = mac_fastpath_disable((mac_handle_t)mip)) != 0) return (err); } /* * Since bind_cpu may be modified by mac_client_set_resources() * we use a copy of bind_cpu and finally cache bind_cpu in mip. * This allows us to cache only user edits in mip. */ bcopy(mrp, &tmrp, sizeof (mac_resource_props_t)); mcip = mac_primary_client_handle(mip); if (mcip != NULL && (mcip->mci_state_flags & MCIS_IS_AGGR_PORT) == 0) { err = mac_client_set_resources((mac_client_handle_t)mcip, &tmrp); } /* Only update the values if mac_client_set_resources succeeded */ if (err == 0) { bcopy(&umrp, &mip->mi_resource_props, sizeof (mac_resource_props_t)); /* * If bankwidth, priority or cpu link properties cleared, * renable fastpath. */ if (resmask != 0 && newresmask == 0) mac_fastpath_enable((mac_handle_t)mip); } else if (resmask == 0 && newresmask != 0) { mac_fastpath_enable((mac_handle_t)mip); } return (err); } int mac_set_resources(mac_handle_t mh, mac_resource_props_t *mrp) { int err; i_mac_perim_enter((mac_impl_t *)mh); err = i_mac_set_resources(mh, mrp); i_mac_perim_exit((mac_impl_t *)mh); return (err); } /* * Get the properties cached for the specified MAC instance. */ void mac_get_resources(mac_handle_t mh, mac_resource_props_t *mrp) { mac_impl_t *mip = (mac_impl_t *)mh; mac_client_impl_t *mcip; if (mip->mi_state_flags & MIS_IS_VNIC) { mcip = mac_primary_client_handle(mip); if (mcip != NULL) { mac_client_get_resources((mac_client_handle_t)mcip, mrp); return; } } bcopy(&mip->mi_resource_props, mrp, sizeof (mac_resource_props_t)); } int mac_set_pvid(mac_handle_t mh, uint16_t pvid) { mac_impl_t *mip = (mac_impl_t *)mh; mac_client_impl_t *mcip; mac_unicast_impl_t *muip; i_mac_perim_enter(mip); if (pvid != 0) { for (mcip = mip->mi_clients_list; mcip != NULL; mcip = mcip->mci_client_next) { for (muip = mcip->mci_unicast_list; muip != NULL; muip = muip->mui_next) { if (muip->mui_vid == pvid) { i_mac_perim_exit(mip); return (EBUSY); } } } } mip->mi_pvid = pvid; i_mac_perim_exit(mip); return (0); } uint16_t mac_get_pvid(mac_handle_t mh) { mac_impl_t *mip = (mac_impl_t *)mh; return (mip->mi_pvid); } uint32_t mac_get_llimit(mac_handle_t mh) { mac_impl_t *mip = (mac_impl_t *)mh; return (mip->mi_llimit); } uint32_t mac_get_ldecay(mac_handle_t mh) { mac_impl_t *mip = (mac_impl_t *)mh; return (mip->mi_ldecay); } /* * Rename a mac client, its flow, and the kstat. */ int mac_rename_primary(mac_handle_t mh, const char *new_name) { mac_impl_t *mip = (mac_impl_t *)mh; mac_client_impl_t *cur_clnt = NULL; flow_entry_t *fep; i_mac_perim_enter(mip); /* * VNICs: we need to change the sys flow name and * the associated flow kstat. */ if (mip->mi_state_flags & MIS_IS_VNIC) { ASSERT(new_name != NULL); mac_rename_flow_names(mac_vnic_lower(mip), new_name); goto done; } /* * This mac may itself be an aggr link, or it may have some client * which is an aggr port. For both cases, we need to change the * aggr port's mac client name, its flow name and the associated flow * kstat. */ if (mip->mi_state_flags & MIS_IS_AGGR) { mac_capab_aggr_t aggr_cap; mac_rename_fn_t rename_fn; boolean_t ret; ASSERT(new_name != NULL); ret = i_mac_capab_get((mac_handle_t)mip, MAC_CAPAB_AGGR, (void *)(&aggr_cap)); ASSERT(ret == B_TRUE); rename_fn = aggr_cap.mca_rename_fn; rename_fn(new_name, mip->mi_driver); /* * The aggr's client name and kstat flow name will be * updated below, i.e. via mac_rename_flow_names. */ } for (cur_clnt = mip->mi_clients_list; cur_clnt != NULL; cur_clnt = cur_clnt->mci_client_next) { if (cur_clnt->mci_state_flags & MCIS_IS_AGGR_PORT) { if (new_name != NULL) { char *str_st = cur_clnt->mci_name; char *str_del = strchr(str_st, '-'); ASSERT(str_del != NULL); bzero(str_del + 1, MAXNAMELEN - (str_del - str_st + 1)); bcopy(new_name, str_del + 1, strlen(new_name)); } fep = cur_clnt->mci_flent; mac_rename_flow(fep, cur_clnt->mci_name); break; } else if (new_name != NULL && cur_clnt->mci_state_flags & MCIS_USE_DATALINK_NAME) { mac_rename_flow_names(cur_clnt, new_name); break; } } done: i_mac_perim_exit(mip); return (0); } /* * Rename the MAC client's flow names */ static void mac_rename_flow_names(mac_client_impl_t *mcip, const char *new_name) { flow_entry_t *flent; uint16_t vid; char flowname[MAXFLOWNAMELEN]; mac_impl_t *mip = mcip->mci_mip; ASSERT(MAC_PERIM_HELD((mac_handle_t)mip)); /* * Use mi_rw_lock to ensure that threads not in the mac perimeter * see a self-consistent value for mci_name */ rw_enter(&mip->mi_rw_lock, RW_WRITER); (void) strlcpy(mcip->mci_name, new_name, sizeof (mcip->mci_name)); rw_exit(&mip->mi_rw_lock); mac_rename_flow(mcip->mci_flent, new_name); if (mcip->mci_nflents == 1) return; /* * We have to rename all the others too, no stats to destroy for * these. */ for (flent = mcip->mci_flent_list; flent != NULL; flent = flent->fe_client_next) { if (flent != mcip->mci_flent) { vid = i_mac_flow_vid(flent); (void) sprintf(flowname, "%s%u", new_name, vid); mac_flow_set_name(flent, flowname); } } } /* * Add a flow to the MAC client's flow list - i.e list of MAC/VID tuples * defined for the specified MAC client. */ static void mac_client_add_to_flow_list(mac_client_impl_t *mcip, flow_entry_t *flent) { ASSERT(MAC_PERIM_HELD((mac_handle_t)mcip->mci_mip)); /* * The promisc Rx data path walks the mci_flent_list. Protect by * using mi_rw_lock */ rw_enter(&mcip->mci_rw_lock, RW_WRITER); /* Add it to the head */ flent->fe_client_next = mcip->mci_flent_list; mcip->mci_flent_list = flent; mcip->mci_nflents++; /* * Keep track of the number of non-zero VIDs addresses per MAC * client to avoid figuring it out in the data-path. */ if (i_mac_flow_vid(flent) != VLAN_ID_NONE) mcip->mci_nvids++; rw_exit(&mcip->mci_rw_lock); } /* * Remove a flow entry from the MAC client's list. */ static void mac_client_remove_flow_from_list(mac_client_impl_t *mcip, flow_entry_t *flent) { flow_entry_t *fe = mcip->mci_flent_list; flow_entry_t *prev_fe = NULL; ASSERT(MAC_PERIM_HELD((mac_handle_t)mcip->mci_mip)); /* * The promisc Rx data path walks the mci_flent_list. Protect by * using mci_rw_lock */ rw_enter(&mcip->mci_rw_lock, RW_WRITER); while ((fe != NULL) && (fe != flent)) { prev_fe = fe; fe = fe->fe_client_next; } ASSERT(fe != NULL); if (prev_fe == NULL) { /* Deleting the first node */ mcip->mci_flent_list = fe->fe_client_next; } else { prev_fe->fe_client_next = fe->fe_client_next; } mcip->mci_nflents--; if (i_mac_flow_vid(flent) != VLAN_ID_NONE) mcip->mci_nvids--; rw_exit(&mcip->mci_rw_lock); } /* * Check if the given VID belongs to this MAC client. */ boolean_t mac_client_check_flow_vid(mac_client_impl_t *mcip, uint16_t vid) { flow_entry_t *flent; uint16_t mci_vid; /* The mci_flent_list is protected by mci_rw_lock */ rw_enter(&mcip->mci_rw_lock, RW_WRITER); for (flent = mcip->mci_flent_list; flent != NULL; flent = flent->fe_client_next) { mci_vid = i_mac_flow_vid(flent); if (vid == mci_vid) { rw_exit(&mcip->mci_rw_lock); return (B_TRUE); } } rw_exit(&mcip->mci_rw_lock); return (B_FALSE); } /* * Get the flow entry for the specified tuple. */ static flow_entry_t * mac_client_get_flow(mac_client_impl_t *mcip, mac_unicast_impl_t *muip) { mac_address_t *map = mcip->mci_unicast; flow_entry_t *flent; uint16_t vid; flow_desc_t flow_desc; ASSERT(MAC_PERIM_HELD((mac_handle_t)mcip->mci_mip)); mac_flow_get_desc(mcip->mci_flent, &flow_desc); if (bcmp(flow_desc.fd_dst_mac, map->ma_addr, map->ma_len) != 0) return (NULL); for (flent = mcip->mci_flent_list; flent != NULL; flent = flent->fe_client_next) { vid = i_mac_flow_vid(flent); if (vid == muip->mui_vid) { return (flent); } } return (NULL); } /* * Since mci_flent has the SRSs, when we want to remove it, we replace * the flow_desc_t in mci_flent with that of an existing flent and then * remove that flent instead of mci_flent. */ static flow_entry_t * mac_client_swap_mciflent(mac_client_impl_t *mcip) { flow_entry_t *flent = mcip->mci_flent; flow_tab_t *ft = flent->fe_flow_tab; flow_entry_t *flent1; flow_desc_t fl_desc; char fl_name[MAXFLOWNAMELEN]; int err; ASSERT(MAC_PERIM_HELD((mac_handle_t)mcip->mci_mip)); ASSERT(mcip->mci_nflents > 1); /* get the next flent following the primary flent */ flent1 = mcip->mci_flent_list->fe_client_next; ASSERT(flent1 != NULL && flent1->fe_flow_tab == ft); /* * Remove the flent from the flow table before updating the * flow descriptor as the hash depends on the flow descriptor. * This also helps incoming packet classification avoid having * to grab fe_lock. Access to fe_flow_desc of a flent not in the * flow table is done under the fe_lock so that log or stat functions * see a self-consistent fe_flow_desc. The name and desc are specific * to a flow, the rest are shared by all the clients, including * resource control etc. */ mac_flow_remove(ft, flent, B_TRUE); mac_flow_remove(ft, flent1, B_TRUE); bcopy(&flent->fe_flow_desc, &fl_desc, sizeof (flow_desc_t)); bcopy(flent->fe_flow_name, fl_name, MAXFLOWNAMELEN); /* update the primary flow entry */ mutex_enter(&flent->fe_lock); bcopy(&flent1->fe_flow_desc, &flent->fe_flow_desc, sizeof (flow_desc_t)); bcopy(&flent1->fe_flow_name, &flent->fe_flow_name, MAXFLOWNAMELEN); mutex_exit(&flent->fe_lock); /* update the flow entry that is to be freed */ mutex_enter(&flent1->fe_lock); bcopy(&fl_desc, &flent1->fe_flow_desc, sizeof (flow_desc_t)); bcopy(fl_name, &flent1->fe_flow_name, MAXFLOWNAMELEN); mutex_exit(&flent1->fe_lock); /* now reinsert the flow entries in the table */ err = mac_flow_add(ft, flent); ASSERT(err == 0); err = mac_flow_add(ft, flent1); ASSERT(err == 0); return (flent1); } /* * Return whether there is only one flow entry associated with this * MAC client. */ static boolean_t mac_client_single_rcvr(mac_client_impl_t *mcip) { return (mcip->mci_nflents == 1); } int mac_validate_props(mac_resource_props_t *mrp) { if (mrp == NULL) return (0); if (mrp->mrp_mask & MRP_PRIORITY) { mac_priority_level_t pri = mrp->mrp_priority; if (pri < MPL_LOW || pri > MPL_RESET) return (EINVAL); } if (mrp->mrp_mask & MRP_MAXBW) { uint64_t maxbw = mrp->mrp_maxbw; if (maxbw < MRP_MAXBW_MINVAL && maxbw != 0) return (EINVAL); } if (mrp->mrp_mask & MRP_CPUS) { int i, j; mac_cpu_mode_t fanout; if (mrp->mrp_ncpus > ncpus || mrp->mrp_ncpus > MAX_SR_FANOUT) return (EINVAL); for (i = 0; i < mrp->mrp_ncpus; i++) { for (j = 0; j < mrp->mrp_ncpus; j++) { if (i != j && mrp->mrp_cpu[i] == mrp->mrp_cpu[j]) { return (EINVAL); } } } for (i = 0; i < mrp->mrp_ncpus; i++) { cpu_t *cp; int rv; mutex_enter(&cpu_lock); cp = cpu_get(mrp->mrp_cpu[i]); if (cp != NULL) rv = cpu_is_online(cp); else rv = 0; mutex_exit(&cpu_lock); if (rv == 0) return (EINVAL); } fanout = mrp->mrp_fanout_mode; if (fanout < 0 || fanout > MCM_CPUS) return (EINVAL); } return (0); } /* * Send a MAC_NOTE_LINK notification to all the MAC clients whenever the * underlying physical link is down. This is to allow MAC clients to * communicate with other clients. */ void mac_virtual_link_update(mac_impl_t *mip) { if (mip->mi_linkstate != LINK_STATE_UP) i_mac_notify(mip, MAC_NOTE_LINK); } /* * For clients that have a pass-thru MAC, e.g. VNIC, we set the VNIC's * mac handle in the client. */ void mac_set_upper_mac(mac_client_handle_t mch, mac_handle_t mh) { mac_client_impl_t *mcip = (mac_client_impl_t *)mch; mcip->mci_upper_mip = (mac_impl_t *)mh; } /* * Mark the mac as being used exclusively by the single mac client that is * doing some control operation on this mac. No further opens of this mac * will be allowed until this client calls mac_unmark_exclusive. The mac * client calling this function must already be in the mac perimeter */ int mac_mark_exclusive(mac_handle_t mh) { mac_impl_t *mip = (mac_impl_t *)mh; ASSERT(MAC_PERIM_HELD(mh)); /* * Look up its entry in the global hash table. */ rw_enter(&i_mac_impl_lock, RW_WRITER); if (mip->mi_state_flags & MIS_DISABLED) { rw_exit(&i_mac_impl_lock); return (ENOENT); } /* * A reference to mac is held even if the link is not plumbed. * In i_dls_link_create() we open the MAC interface and hold the * reference. There is an additional reference for the mac_open * done in acquiring the mac perimeter */ if (mip->mi_ref != 2) { rw_exit(&i_mac_impl_lock); return (EBUSY); } ASSERT(!(mip->mi_state_flags & MIS_EXCLUSIVE_HELD)); mip->mi_state_flags |= MIS_EXCLUSIVE_HELD; rw_exit(&i_mac_impl_lock); return (0); } void mac_unmark_exclusive(mac_handle_t mh) { mac_impl_t *mip = (mac_impl_t *)mh; ASSERT(MAC_PERIM_HELD(mh)); rw_enter(&i_mac_impl_lock, RW_WRITER); /* 1 for the creation and another for the perimeter */ ASSERT(mip->mi_ref == 2 && (mip->mi_state_flags & MIS_EXCLUSIVE_HELD)); mip->mi_state_flags &= ~MIS_EXCLUSIVE_HELD; rw_exit(&i_mac_impl_lock); } /* * Set the MTU for the specified MAC. Note that this mechanism depends on * the driver calling mac_maxsdu_update() to update the link MTU if it was * successful in setting its MTU. * * Note that there is potential for improvement here. A better model might be * to not require drivers to call mac_maxsdu_update(), but rather have this * function update mi_sdu_max and send notifications if the driver setprop * callback succeeds. This would remove the burden and complexity from * drivers. */ int mac_set_mtu(mac_handle_t mh, uint_t new_mtu, uint_t *old_mtu_arg) { mac_impl_t *mip = (mac_impl_t *)mh; uint_t old_mtu; int rv = 0; i_mac_perim_enter(mip); if (!(mip->mi_callbacks->mc_callbacks & (MC_SETPROP|MC_GETPROP))) { rv = ENOTSUP; goto bail; } old_mtu = mip->mi_sdu_max; if (old_mtu != new_mtu) { rv = mip->mi_callbacks->mc_setprop(mip->mi_driver, "mtu", MAC_PROP_MTU, sizeof (uint_t), &new_mtu); } bail: i_mac_perim_exit(mip); if (rv == 0 && old_mtu_arg != NULL) *old_mtu_arg = old_mtu; return (rv); } void mac_get_hwgrp_info(mac_handle_t mh, int grp_index, uint_t *grp_num, uint_t *n_rings, uint_t *type, uint_t *n_clnts, char *clnts_name) { mac_impl_t *mip = (mac_impl_t *)mh; mac_grp_client_t *mcip; uint_t i = 0, index = 0; /* Revisit when we implement fully dynamic group allocation */ ASSERT(grp_index >= 0 && grp_index < mip->mi_rx_group_count); rw_enter(&mip->mi_rw_lock, RW_READER); *grp_num = mip->mi_rx_groups[grp_index].mrg_index; *type = mip->mi_rx_groups[grp_index].mrg_type; *n_rings = mip->mi_rx_groups[grp_index].mrg_cur_count; for (mcip = mip->mi_rx_groups[grp_index].mrg_clients; mcip != NULL; mcip = mcip->mgc_next) { int name_len = strlen(mcip->mgc_client->mci_name); /* * MAXCLIENTNAMELEN is the buffer size reserved for client * names. * XXXX Formating the client name string needs to be moved * to user land when fixing the size of dhi_clnts in * dld_hwgrpinfo_t. We should use n_clients * client_name for * dhi_clntsin instead of MAXCLIENTNAMELEN */ if (index + name_len >= MAXCLIENTNAMELEN) { index = MAXCLIENTNAMELEN; break; } bcopy(mcip->mgc_client->mci_name, &(clnts_name[index]), name_len); index += name_len; clnts_name[index++] = ','; i++; } /* Get rid of the last , */ if (index > 0) clnts_name[index - 1] = '\0'; *n_clnts = i; rw_exit(&mip->mi_rw_lock); } uint_t mac_hwgrp_num(mac_handle_t mh) { mac_impl_t *mip = (mac_impl_t *)mh; return (mip->mi_rx_group_count); }