/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (C) 2003-2005 Chelsio Communications. All rights reserved. */ #pragma ident "%Z%%M% %I% %E% SMI" /* mc5.c */ #include "common.h" #include "regs.h" #include "mc5.h" /* DBGI command mode */ enum { DBGI_MODE_MBUS, DBGI_MODE_LARA_7000, DBGI_MODE_LARA_8000, DBGI_MODE_NETL_4000, DBGI_MODE_NETL_5000, DBGI_MODE_IDT_52100 }; /* Lara command register address and values (low 32 bits) */ #define MC5_LRA_CMDREG_ADR0 0x00180038 #define MC5_LRA_CMDREG_72KEY_DATA0 0x00000182 #define MC5_LRA_CMDREG_144KEY_DATA0 0x00AAAB82 /* Lara config register address and values (low 32 bits) */ #define MC5_LRA_CFGREG_ADR0 0x0018003D #define MC5_LRA_CFGREG_72KEY_DATA0 0x00000000 #define MC5_LRA_CFGREG_144KEY_DATA0 0x55555555 /* Lara GMR base addresses (low 32 bits) */ #define MC5_LRA_GMRREG_BASE_ADR0_1 0x00180020 #define MC5_LRA_GMRREG_BASE_ADR0_2 0x00180060 /* Lara 7000 data and mask array base addresses (low 32 bits) */ #define MC5_LRA_DATARY_BASE_ADR0 0x00000000 #define MC5_LRA_MSKARY_BASE_ADR0 0x00080000 /* Lara commands */ #define MC5_LRA_CMD_READ 0x00000000 #define MC5_LRA_CMD_WRITE 0x00010001 #define MC5_LRA_CMD_SEARCH 0x00020002 #define MC5_LRA_CMD_LEARN 0x00030003 /* IDT 75P52100 commands */ #define MC5_IDT_CMD_READ 0x0 #define MC5_IDT_CMD_WRITE 0x1 #define MC5_IDT_CMD_SEARCH 0x2 #define MC5_IDT_CMD_LEARN 0x3 #define MC5_IDT_CMD_NFA_SEARCH 0x4 /* IDT LAR register address and value for 144-bit mode (low 32 bits) */ #define MC5_IDT_LAR_ADR0 0x180006 #define MC5_IDT_LAR_MODE144 0xffff0000 /* IDT SCR and SSR addresses (low 32 bits) */ #define MC5_IDT_SCR_ADR0 0x180000 #define MC5_IDT_SSR0_ADR0 0x180002 #define MC5_IDT_SSR1_ADR0 0x180004 /* IDT GMR base address (low 32 bits) */ #define MC5_IDT_GMR_BASE_ADR0 0x180020 /* IDT data and mask array base addresses (low 32 bits) */ #define MC5_IDT_DATARY_BASE_ADR0 0x00000000 #define MC5_IDT_MSKARY_BASE_ADR0 0x00080000 #define IDT_ELOOKUP_2Mb 0x7000 #define IDT_ELOOKUP_9Mb 0x16000 enum { LARA_7000, LARA_8000, NETLOGIC_4000, NETLOGIC_5000, IDT75P52100 }; static unsigned int tcam_part_size[] = { 4718592, /* 4.5Mb */ 9437184, /* 9Mb */ 18874368 /* 18Mb */ }; struct pemc5 { adapter_t *adapter; unsigned int tcam_size; unsigned int part_size; unsigned char part_type; unsigned char parity_enabled; unsigned char issue_syn; unsigned char mode; struct pemc5_intr_counts intr_counts; #ifdef SUPPORT_MODE72 u32 lip[MC5_LIP_NUM_OF_ENTRIES]; unsigned int lip_index; #endif }; #define MAX_WRITE_ATTEMPTS 5 /* * Issue a command to the TCAM and wait for its completion. The address and * any data required by the command must have been setup by the caller. */ static int mc5_cmd_write(adapter_t *adapter, u32 cmd) { t1_write_reg_4(adapter, A_MC5_DBGI_REQ_CMD, cmd); return t1_wait_op_done(adapter, A_MC5_DBGI_RSP_STATUS, F_DBGI_RSP_VALID, 1, MAX_WRITE_ATTEMPTS, 1); } unsigned int t1_mc5_get_tcam_size(struct pemc5 *mc5) { return mc5->tcam_size; } static int set_tcam_rtbl_base(struct pemc5 *mc5, unsigned int rtbl_base) { if (rtbl_base >= t1_mc5_get_tcam_size(mc5)) return -1; t1_write_reg_4(mc5->adapter, A_MC5_ROUTING_TABLE_INDEX, rtbl_base); return 0; } unsigned int t1_mc5_get_tcam_rtbl_base(struct pemc5 *mc5) { return t1_read_reg_4(mc5->adapter, A_MC5_ROUTING_TABLE_INDEX); } unsigned int t1_mc5_get_tcam_rtbl_size(struct pemc5 *mc5) { unsigned int tcam_size = t1_mc5_get_tcam_size(mc5); unsigned int tcam_rtable_base = t1_mc5_get_tcam_rtbl_base(mc5); return tcam_size - tcam_rtable_base; } static int set_tcam_server_base(struct pemc5 *mc5, unsigned int server_base) { if (server_base >= t1_mc5_get_tcam_size(mc5)) return -1; t1_write_reg_4(mc5->adapter, A_MC5_SERVER_INDEX, server_base); return 0; } unsigned int t1_mc5_get_tcam_server_base(struct pemc5 *mc5) { return t1_read_reg_4(mc5->adapter, A_MC5_SERVER_INDEX); } unsigned int t1_mc5_get_tcam_server_size(struct pemc5 *mc5) { unsigned int tcam_rtable_base = t1_mc5_get_tcam_rtbl_base(mc5); unsigned int tcam_server_base = t1_mc5_get_tcam_server_base(mc5); return tcam_rtable_base - tcam_server_base; } static inline void dbgi_wr_addr3(adapter_t *adapter, u32 v1, u32 v2, u32 v3) { t1_write_reg_4(adapter, A_MC5_DBGI_REQ_ADDR0, v1); t1_write_reg_4(adapter, A_MC5_DBGI_REQ_ADDR1, v2); t1_write_reg_4(adapter, A_MC5_DBGI_REQ_ADDR2, v3); } static inline void dbgi_wr_data3(adapter_t *adapter, u32 v1, u32 v2, u32 v3) { t1_write_reg_4(adapter, A_MC5_DBGI_REQ_DATA0, v1); t1_write_reg_4(adapter, A_MC5_DBGI_REQ_DATA1, v2); t1_write_reg_4(adapter, A_MC5_DBGI_REQ_DATA2, v3); } static inline void dbgi_rd_rsp3(adapter_t *adapter, u32 *v1, u32 *v2, u32 *v3) { *v1 = t1_read_reg_4(adapter, A_MC5_DBGI_RSP_DATA0); *v2 = t1_read_reg_4(adapter, A_MC5_DBGI_RSP_DATA1); *v3 = t1_read_reg_4(adapter, A_MC5_DBGI_RSP_DATA2); } /* * Write data to the TCAM register at address (0, 0, addr_lo) using the TCAM * command cmd. The data to be written must have been set up by the caller. * Returns -1 on failure, 0 on success. */ static int mc5_write(adapter_t *adapter, u32 addr_lo, u32 cmd) { t1_write_reg_4(adapter, A_MC5_DBGI_REQ_ADDR0, addr_lo); if (mc5_cmd_write(adapter, cmd) == 0) return 0; CH_ERR("%s: MC5 timeout writing to TCAM address 0x%x\n", adapter_name(adapter), addr_lo); return -1; } static int init_mask_data_array(struct pemc5 *mc5, u32 mask_array_base, u32 data_array_base, u32 write_cmd) { unsigned int i; adapter_t *adap = mc5->adapter; /* * We need the size of the TCAM data and mask arrays in terms of * 72-bit entries. */ unsigned int size72 = tcam_part_size[mc5->part_size] / 72; unsigned int server_base = t1_mc5_get_tcam_server_base(mc5); if (mc5->mode == MC5_MODE_144_BIT) server_base *= 2; /* 1 144-bit entry is 2 72-bit entries */ /* Clear the data array */ dbgi_wr_data3(adap, 0, 0, 0); for (i = 0; i < size72; i++) if (mc5_write(adap, data_array_base + i, write_cmd)) return -1; /* Initialize the mask array. */ dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff); for (i = 0; i < size72; i++) { if (i == server_base) /* entering server or routing region */ t1_write_reg_4(adap, A_MC5_DBGI_REQ_DATA0, mc5->mode == MC5_MODE_144_BIT ? 0xfffffff9 : 0xfffffffd); if (mc5_write(adap, mask_array_base + i, write_cmd)) return -1; } return 0; } static int init_lara7000(struct pemc5 *mc5) { int i; adapter_t *adap = mc5->adapter; t1_write_reg_4(adap, A_MC5_RSP_LATENCY, t1_is_asic(adap) ? 0x0a0a0a0a : 0x09090909); if (mc5->parity_enabled) { t1_write_reg_4(adap, A_MC5_AOPEN_SRCH_CMD, 0x20022); t1_write_reg_4(adap, A_MC5_SYN_SRCH_CMD, 0x20022); t1_write_reg_4(adap, A_MC5_ACK_SRCH_CMD, 0x20022); } /* Set DBGI command mode for Lara TCAM. */ t1_write_reg_4(adap, A_MC5_DBGI_CONFIG, DBGI_MODE_LARA_7000); dbgi_wr_data3(adap, mc5->mode == MC5_MODE_144_BIT ? MC5_LRA_CMDREG_144KEY_DATA0 : MC5_LRA_CMDREG_72KEY_DATA0, 0, 0); if (mc5_write(adap, MC5_LRA_CMDREG_ADR0, MC5_LRA_CMD_WRITE)) goto err; dbgi_wr_data3(adap, mc5->mode == MC5_MODE_144_BIT ? MC5_LRA_CFGREG_144KEY_DATA0 : MC5_LRA_CFGREG_72KEY_DATA0, 0, 0); if (mc5_write(adap, MC5_LRA_CFGREG_ADR0, MC5_LRA_CMD_WRITE)) goto err; /* Global Mask Registers (GMR) 0-15 */ for (i = 0; i < 16; i++) { if (i == 8 || i == 9) dbgi_wr_data3(adap, mc5->mode == MC5_MODE_72_BIT ? 0xfffffffd : 0xfffffff9, 0xffffffff, 0xff); else dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff); if (mc5_write(adap, MC5_LRA_GMRREG_BASE_ADR0_1 + i, MC5_LRA_CMD_WRITE)) goto err; } /* Global Mask Registers (GMR) 16-31 */ for (i = 0; i < 16; i++) { if (i <= 1 && mc5->mode == MC5_MODE_72_BIT) dbgi_wr_data3(adap, 0xfffffffd, 0xffffc003, 0xff); else if (i == 0) dbgi_wr_data3(adap, 0xfffffff9, 0xffffffff, 0xff); else if (i == 1) dbgi_wr_data3(adap, 0xfffffff9, 0xffff8007, 0xff); else dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff); if (mc5_write(adap, MC5_LRA_GMRREG_BASE_ADR0_2 + i, MC5_LRA_CMD_WRITE)) goto err; } return init_mask_data_array(mc5, MC5_LRA_MSKARY_BASE_ADR0, MC5_LRA_DATARY_BASE_ADR0, MC5_LRA_CMD_WRITE); err: return -EIO; } static int init_idt52100(struct pemc5 *mc5) { int i; adapter_t *adap = mc5->adapter; t1_write_reg_4(adap, A_MC5_RSP_LATENCY, 0x151515); t1_write_reg_4(adap, A_MC5_PART_ID_INDEX, 2); /* * Use GMRs 8-9 for ACK and AOPEN searches, GMRs 12-13 for SYN search, * and GMRs 14-15 for ELOOKUP. */ t1_write_reg_4(adap, A_MC5_POPEN_DATA_WR_CMD, MC5_IDT_CMD_WRITE); t1_write_reg_4(adap, A_MC5_POPEN_MASK_WR_CMD, MC5_IDT_CMD_WRITE); t1_write_reg_4(adap, A_MC5_AOPEN_SRCH_CMD, MC5_IDT_CMD_SEARCH); t1_write_reg_4(adap, A_MC5_AOPEN_LRN_CMD, MC5_IDT_CMD_LEARN); t1_write_reg_4(adap, A_MC5_SYN_SRCH_CMD, MC5_IDT_CMD_SEARCH | 0x6000); t1_write_reg_4(adap, A_MC5_SYN_LRN_CMD, MC5_IDT_CMD_LEARN); t1_write_reg_4(adap, A_MC5_ACK_SRCH_CMD, MC5_IDT_CMD_SEARCH); t1_write_reg_4(adap, A_MC5_ACK_LRN_CMD, MC5_IDT_CMD_LEARN); t1_write_reg_4(adap, A_MC5_ILOOKUP_CMD, MC5_IDT_CMD_SEARCH); t1_write_reg_4(adap, A_MC5_ELOOKUP_CMD, MC5_IDT_CMD_SEARCH | 0x7000); t1_write_reg_4(adap, A_MC5_DATA_WRITE_CMD, MC5_IDT_CMD_WRITE); t1_write_reg_4(adap, A_MC5_DATA_READ_CMD, MC5_IDT_CMD_READ); /* Set DBGI command mode for IDT TCAM. */ t1_write_reg_4(adap, A_MC5_DBGI_CONFIG, DBGI_MODE_IDT_52100); /* Set up LAR */ dbgi_wr_data3(adap, MC5_IDT_LAR_MODE144, 0, 0); if (mc5_write(adap, MC5_IDT_LAR_ADR0, MC5_IDT_CMD_WRITE)) goto err; /* Set up SSRs */ dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0); if (mc5_write(adap, MC5_IDT_SSR0_ADR0, MC5_IDT_CMD_WRITE) || mc5_write(adap, MC5_IDT_SSR1_ADR0, MC5_IDT_CMD_WRITE)) goto err; /* Set up GMRs */ for (i = 0; i < 32; ++i) { if (i >= 12 && i < 15) dbgi_wr_data3(adap, 0xfffffff9, 0xffffffff, 0xff); else if (i == 15) dbgi_wr_data3(adap, 0xfffffff9, 0xffff8007, 0xff); else dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff); if (mc5_write(adap, MC5_IDT_GMR_BASE_ADR0 + i, MC5_IDT_CMD_WRITE)) goto err; } /* Set up SCR */ dbgi_wr_data3(adap, 1, 0, 0); if (mc5_write(adap, MC5_IDT_SCR_ADR0, MC5_IDT_CMD_WRITE)) goto err; return init_mask_data_array(mc5, MC5_IDT_MSKARY_BASE_ADR0, MC5_IDT_DATARY_BASE_ADR0, MC5_IDT_CMD_WRITE); err: return -EIO; } /* Put MC5 in DBGI mode. */ static inline void mc5_dbgi_mode_enable(struct pemc5 *mc5) { t1_write_reg_4(mc5->adapter, A_MC5_CONFIG, V_MODE(mc5->mode == MC5_MODE_72_BIT) | F_DBGI_ENABLE | V_NUM_LIP(MC5_LIP_NUM_OF_ENTRIES - 1)); } /* Put MC5 in M-Bus mode. */ static void mc5_dbgi_mode_disable(struct pemc5 *mc5) { t1_write_reg_4(mc5->adapter, A_MC5_CONFIG, V_MODE(mc5->mode == MC5_MODE_72_BIT) | V_COMPRESSION_ENABLE(mc5->mode == MC5_MODE_72_BIT) | V_PARITY_ENABLE(mc5->parity_enabled) | V_SYN_ISSUE_MODE(mc5->issue_syn) | F_M_BUS_ENABLE | V_NUM_LIP(MC5_LIP_NUM_OF_ENTRIES - 1)); } /* * Initialization that requires the OS and protocol layers to already * be intialized goes here. */ int t1_mc5_init(struct pemc5 *mc5, unsigned int nservers, unsigned int nroutes, int parity, int syn) { u32 cfg; int err = 0; unsigned int tcam_size = t1_mc5_get_tcam_size(mc5); adapter_t *adap = mc5->adapter; /* Reset the TCAM */ cfg = t1_read_reg_4(adap, A_MC5_CONFIG) & ~F_MODE; cfg |= V_MODE(mc5->mode == MC5_MODE_72_BIT) | F_TCAM_RESET; t1_write_reg_4(adap, A_MC5_CONFIG, cfg); if (t1_wait_op_done(adap, A_MC5_CONFIG, F_TCAM_READY, 1, 500, 0)) { CH_ERR("%s: TCAM reset timed out\n", adapter_name(adap)); return -1; } if (set_tcam_rtbl_base(mc5, tcam_size - nroutes) || set_tcam_server_base(mc5, tcam_size - nroutes - nservers)) return -EINVAL; #ifdef SUPPORT_MODE72 if (mc5->mode == MC5_MODE_72_BIT) t1_mc5_lip_write_entries(mc5); #endif mc5->issue_syn = (unsigned char)syn; mc5->parity_enabled = (unsigned char)parity; /* All the TCAM addresses we access have only the low 32 bits non 0 */ t1_write_reg_4(adap, A_MC5_DBGI_REQ_ADDR1, 0); t1_write_reg_4(adap, A_MC5_DBGI_REQ_ADDR2, 0); mc5_dbgi_mode_enable(mc5); switch (mc5->part_type) { case LARA_7000: err = init_lara7000(mc5); break; case IDT75P52100: err = init_idt52100(mc5); break; default: CH_ERR("%s: unsupported TCAM type\n", adapter_name(adap)); err = -EINVAL; break; } mc5_dbgi_mode_disable(mc5); return err; } /* * read_mc5_range - dump a part of the memory managed by MC5 * @mc5: the MC5 handle * @start: the start address for the dump * @n: number of 72-bit words to read * @buf: result buffer * * Read n 72-bit words from MC5 memory from the given start location. */ int t1_read_mc5_range(struct pemc5 *mc5, unsigned int start, unsigned int n, u32 *buf) { u32 read_cmd; /* int err = 0; */ adapter_t *adap = mc5->adapter; if (mc5->part_type == LARA_7000) read_cmd = MC5_LRA_CMD_READ; else if (mc5->part_type == IDT75P52100) read_cmd = MC5_IDT_CMD_READ; else return -EINVAL; mc5_dbgi_mode_enable(mc5); while (n--) { t1_write_reg_4(adap, A_MC5_DBGI_REQ_ADDR0, start++); if (mc5_cmd_write(adap, read_cmd)) { /* err = -EIO; */ break; } dbgi_rd_rsp3(adap, buf + 2, buf + 1, buf); buf += 3; } mc5_dbgi_mode_disable(mc5); return 0; } #define MC5_INT_MASK (F_MC5_INT_HIT_OUT_ACTIVE_REGION_ERR | \ F_MC5_INT_HIT_IN_RT_REGION_ERR | F_MC5_INT_LIP0_ERR | \ F_MC5_INT_LIP_MISS_ERR | F_MC5_INT_PARITY_ERR | \ F_MC5_INT_ACTIVE_REGION_FULL | F_MC5_INT_NFA_SRCH_ERR | \ F_MC5_INT_UNKNOWN_CMD | F_MC5_INT_DEL_ACT_EMPTY) #define MC5_INT_FATAL (F_MC5_INT_PARITY_ERR | F_MC5_INT_REQUESTQ_PARITY_ERR | \ F_MC5_INT_DISPATCHQ_PARITY_ERR) void t1_mc5_intr_enable(struct pemc5 *mc5) { u32 mask = MC5_INT_MASK; if (!mc5->parity_enabled) mask &= ~F_MC5_INT_PARITY_ERR; #ifdef CONFIG_CHELSIO_T1_1G if (!t1_is_asic(mc5->adapter)) { /* * Enable child block for MC5. * * NOTE: Assumes TP parent interrupt block is enabled. * MC5 requires TP parent block to be enabled. */ t1_write_reg_4(mc5->adapter, A_MC5_INT_ENABLE, mask); } else #endif { u32 pl_intr = t1_read_reg_4(mc5->adapter, A_PL_ENABLE); t1_write_reg_4(mc5->adapter, A_PL_ENABLE, pl_intr | F_PL_INTR_MC5); t1_write_reg_4(mc5->adapter, A_MC5_INT_ENABLE, mask | F_MC5_INT_REQUESTQ_PARITY_ERR | F_MC5_INT_DISPATCHQ_PARITY_ERR); } } void t1_mc5_intr_disable(struct pemc5 *mc5) { #ifdef CONFIG_CHELSIO_T1_1G if (!t1_is_asic(mc5->adapter)) t1_write_reg_4(mc5->adapter, A_MC5_INT_ENABLE, 0); else #endif { u32 pl_intr = t1_read_reg_4(mc5->adapter, A_PL_ENABLE); t1_write_reg_4(mc5->adapter, A_PL_ENABLE, pl_intr & ~F_PL_INTR_MC5); t1_write_reg_4(mc5->adapter, A_MC5_INT_ENABLE, 0); } } void t1_mc5_intr_clear(struct pemc5 *mc5) { #ifdef CONFIG_CHELSIO_T1_1G if (!t1_is_asic(mc5->adapter)) { t1_write_reg_4(mc5->adapter, A_MC5_INT_CAUSE, 0xffffffff); } else #endif { t1_write_reg_4(mc5->adapter, A_PL_CAUSE, F_PL_INTR_MC5); t1_write_reg_4(mc5->adapter, A_MC5_INT_CAUSE, 0xffffffff); } } /* * We don't really do anything with MC5 interrupts, just record them. */ void t1_mc5_intr_handler(struct pemc5 *mc5) { adapter_t *adap = mc5->adapter; u32 cause = t1_read_reg_4(adap, A_MC5_INT_CAUSE); if (cause & F_MC5_INT_HIT_OUT_ACTIVE_REGION_ERR) mc5->intr_counts.hit_out_active_region_err++; if (cause & F_MC5_INT_HIT_IN_ACTIVE_REGION_ERR) mc5->intr_counts.hit_in_active_region_err++; if (cause & F_MC5_INT_HIT_IN_RT_REGION_ERR) mc5->intr_counts.hit_in_routing_region_err++; if (cause & F_MC5_INT_MISS_ERR) mc5->intr_counts.miss_err++; if (cause & F_MC5_INT_LIP0_ERR) mc5->intr_counts.lip_equal_zero_err++; if (cause & F_MC5_INT_LIP_MISS_ERR) mc5->intr_counts.lip_miss_err++; if ((cause & F_MC5_INT_PARITY_ERR) && mc5->parity_enabled) { CH_ALERT("%s: MC5 parity error\n", adapter_name(adap)); mc5->intr_counts.parity_err++; } if (cause & F_MC5_INT_ACTIVE_REGION_FULL) mc5->intr_counts.active_region_full_err++; if (cause & F_MC5_INT_NFA_SRCH_ERR) mc5->intr_counts.next_free_addr_srch_err++; if (cause & F_MC5_INT_SYN_COOKIE) mc5->intr_counts.syn_cookie++; if (cause & F_MC5_INT_SYN_COOKIE_BAD) mc5->intr_counts.syn_cookie_bad_message++; if (cause & F_MC5_INT_SYN_COOKIE_OFF) mc5->intr_counts.syn_cookie_off_message++; if (cause & F_MC5_INT_UNKNOWN_CMD) mc5->intr_counts.receive_unknown_cmd++; if (cause & F_MC5_INT_REQUESTQ_PARITY_ERR) { CH_ALERT("%s: MC5 request queue parity error\n", adapter_name(adap)); mc5->intr_counts.parity_in_request_q_err++; } if (cause & F_MC5_INT_DISPATCHQ_PARITY_ERR) { CH_ALERT("%s: MC5 dispatch queue parity error\n", adapter_name(adap)); mc5->intr_counts.parity_in_dispatch_q_err++; } if (cause & F_MC5_INT_DEL_ACT_EMPTY) mc5->intr_counts.del_and_act_is_empty++; if (cause & MC5_INT_FATAL) t1_fatal_err(adap); t1_write_reg_4(adap, A_MC5_INT_CAUSE, cause); } const struct pemc5_intr_counts *t1_mc5_get_intr_counts(struct pemc5 *mc5) { return &mc5->intr_counts; } struct pemc5 * __devinit t1_mc5_create(adapter_t *adapter, int mode) { struct pemc5 *mc5; u32 cfg, bits_per_entry; if (mode != MC5_MODE_144_BIT && mode != MC5_MODE_72_BIT) return NULL; mc5 = t1_os_malloc_wait_zero(sizeof(*mc5)); if (!mc5) return NULL; mc5->adapter = adapter; mc5->mode = (unsigned char) mode; cfg = t1_read_reg_4(adapter, A_MC5_CONFIG); mc5->part_size = G_TCAM_PART_SIZE(cfg); mc5->part_type = (unsigned char) G_TCAM_PART_TYPE(cfg); if (cfg & F_TCAM_PART_TYPE_HI) mc5->part_type |= 4; /* * Calculate the size of the TCAM based on the total memory, mode, and * count information retrieved from the hardware. */ bits_per_entry = mode == MC5_MODE_144_BIT ? 144 : 72; mc5->tcam_size = tcam_part_size[mc5->part_size] / bits_per_entry; return mc5; } void t1_mc5_destroy(struct pemc5 *mc5) { t1_os_free((void *)mc5, sizeof(*mc5)); } #ifdef SUPPORT_MODE72 static int mc5_cmp(const void *pi, const void *pj) { const u32 *pii = (const u32 *)pi; const u32 *pjj = (const u32 *)pj; if (*pii < *pjj) return -1; return *pii > *pjj; } /* * DESC: Write local IP addresses to the TCAM * * NOTES: IP addresses should be in host byte order. So, an IP address: * of 10.0.0.140 == (data = 0x0A00008C) */ static int mc5_set_lip_entries(struct pemc5 *mc5, u32 *p, int num_of_lip_addresses) { int i; /* * Disable compression and M bus mode so that the TP core * doesn't access the TCAM while we are writing. */ u32 cfg = t1_read_reg_4(mc5->adapter, A_MC5_CONFIG); t1_write_reg_4(mc5->adapter, A_MC5_CONFIG, cfg & ~(F_M_BUS_ENABLE | F_COMPRESSION_ENABLE)); /* MC5 should now be ready to program the LIP addresses. */ for (i = 0; i < num_of_lip_addresses; i++) { t1_write_reg_4(mc5->adapter, A_MC5_LIP_RAM_DATA, p[i]); t1_write_reg_4(mc5->adapter, A_MC5_LIP_RAM_ADDR, 0x100 + i); } /* Restore MC5 mode. */ t1_write_reg_4(mc5->adapter, A_MC5_CONFIG, cfg | F_COMPRESSION_ENABLE); return 0; } /* * The purpose of this routine is to write all of the local IP addresses * into the TCAM in sorted order. This is a requirement from the TCAM. */ void t1_mc5_lip_write_entries(struct pemc5 *mc5) { u32 filler = 0; int i; if (mc5->lip_index) { qsort(mc5->lip, mc5->lip_index, sizeof(u32), mc5_cmp); filler = mc5->lip[mc5->lip_index - 1]; } for (i = mc5->lip_index; i < MC5_LIP_NUM_OF_ENTRIES; i++) mc5->lip[i] = filler; mc5_set_lip_entries(mc5, mc5->lip, MC5_LIP_NUM_OF_ENTRIES); } void t1_mc5_lip_clear_entries(struct pemc5 *mc5) { mc5->lip_index = 0; } /* * Add a local IP address to the LIP table. */ int t1_mc5_lip_add_entry(struct pemc5 *mc5, u32 lip) { if (mc5->lip_index >= MC5_LIP_NUM_OF_ENTRIES) return 1; mc5->lip[mc5->lip_index++] = lip; return 0; } #endif